>>> redis: Building main/redis 7.2.9-r0 (using abuild 3.12.0-r0) started Fri, 30 May 2025 00:20:35 +0000 >>> redis: Checking sanity of /home/buildozer/aports/main/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.5-r0) (2/8) Installing openssl-dev (3.1.8-r0) (3/8) Installing tzdata (2025b-r0) (4/8) Installing tcl (8.6.13-r1) (5/8) Installing libintl (0.22.3-r0) (6/8) Installing libproc2 (4.0.4-r0) (7/8) Installing procps-ng (4.0.4-r0) (8/8) Installing .makedepends-redis (20250530.002036) Executing busybox-1.36.1-r19.trigger OK: 290 MiB in 114 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.19//redis-7.2.9.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.19//redis-7.2.9.tar.gz >>> redis: Checking sha512sums... redis-7.2.9.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK >>> redis: Unpacking /var/cache/distfiles/v3.19/redis-7.2.9.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise make[3]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/hiredis' MAKE lua cd linenoise && make make[3]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" make[3]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c MAKE hdr_histogram cd hdr_histogram && make gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c make[3]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c MAKE fpconv gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c cd fpconv && make gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c make[3]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c ar rcs libfpconv.a fpconv_dtoa.o gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c make[3]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/fpconv' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c make[3]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/linenoise' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/hdr_histogram' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/hiredis' ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o redis-check-aof.c: In function 'processAnnotations': redis-check-aof.c:194:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 194 | printf("AOF %s has nothing before timestamp %ld, " | ~~^ | | | long int | %lld 195 | "aborting...\n", filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:199:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 199 | printf("Failed to truncate AOF %s to timestamp %ld to offset %ld because it is not the last file.\n", | ~~^ | | | long int | %lld 200 | filename, to_timestamp, (long int)epos); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:207:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 207 | printf("Failed to truncate AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 208 | filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC call_reply.o redis-check-aof.c: In function 'checkSingleAof': redis-check-aof.c:295:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 295 | printf("Truncate nothing in AOF %s to timestamp %ld\n", aof_filename, to_timestamp); | ~~^ ~~~~~~~~~~~~ | | | | long int time_t {aka long long int} | %lld redis-check-aof.c: In function 'printAofStyle': redis-check-aof.c:446:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 446 | printf("Successfully truncated AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 447 | aofFileName, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o LINK redis-benchmark LINK redis-cli LINK redis-server INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 30726 Testing unit/printver [ready]: 30727 Testing unit/dump [ready]: 30728 Testing unit/auth [ready]: 30729 Testing unit/protocol [ready]: 30730 Testing unit/keyspace [ready]: 30731 Testing unit/scan [ready]: 30732 Testing unit/info [ready]: 30733 Testing unit/info-command [ready]: 30734 Testing unit/type/string [ready]: 30735 Testing unit/type/incr [ready]: 30736 Testing unit/type/list [ready]: 30737 Testing unit/type/list-2 [ready]: 30738 Testing unit/type/list-3 [ready]: 30739 Testing unit/type/set [ready]: 30740 Testing unit/type/zset [ready]: 30741 Testing unit/type/hash [ok]: Check encoding - listpack (19 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (29 ms) Testing Redis version 7.2.9 (00000000) [ok]: AUTH fails if there is no password configured server side (1 ms) [ok]: Arity check for auth command (1 ms) [ok]: INCR against non existing key (1 ms) [ok]: Explicit regression for a list bug (2 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (22 ms) [ok]: INCR against key created by incr itself (1 ms) [ok]: info command with at most one sub command (18 ms) [ok]: DECR against key created by incr (1 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: info command with one sub-section (8 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: INCR against key originally set with SET (1 ms) [ok]: HRANDFIELD - listpack (6 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (20 ms) [ok]: info command with multiple sub-sections (10 ms) [ok]: DEL against a single item (22 ms) [ok]: ZSET basic ZADD and score update - listpack (43 ms) [ok]: INCR over 32bit value (0 ms) [ok]: HRANDFIELD - hashtable (6 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (7 ms) [ok]: HRANDFIELD with RESP3 (4 ms) [ok]: SET and GET an item (9 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (7 ms) [ok]: INCR fails against key with spaces (left) (2 ms) [ok]: HRANDFIELD count of 0 is handled correctly (1 ms) [ok]: RESTORE can set an absolute expire (20 ms) [ok]: SET and GET an empty item (13 ms) [ok]: Vararg DEL (21 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (46 ms) [ok]: Handle an empty query (45 ms) [ok]: INCR fails against key with spaces (right) (1 ms) [ok]: HRANDFIELD count overflow (0 ms) [1/92 done]: unit/printver (0 seconds) Testing unit/type/stream [ok]: ZADD with options syntax error with incomplete pair - listpack (16 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: Untagged multi-key commands (15 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: RESTORE with ABSTTL in the past (24 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZADD XX option without key - listpack (14 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: INCR fails against a key holding a list (2 ms) [ok]: ZADD XX existing key - listpack (16 ms) [2/92 done]: unit/info-command (0 seconds) Testing unit/type/stream-cgroups [ok]: KEYS with pattern (31 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: RESTORE can set LRU (33 ms) [ok]: KEYS to get all keys (4 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (10 ms) [ok]: Negative multibulk length (54 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: DBSIZE (1 ms) [ok]: Out of range multibulk length (1 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: INCR can modify objects in-place (0 ms) [ok]: ZADD XX updates existing elements score - listpack (21 ms) [ok]: Negative multibulk payload length (1 ms) [ok]: latencystats: disable/enable (6 ms) [ok]: DEL all keys (25 ms) [ok]: INCRBYFLOAT against non existing key (3 ms) [ok]: RESTORE can set LFU (29 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: latencystats: configure percentiles (2 ms) [ok]: Very big payload in GET/SET (77 ms) [ok]: reg node check compression with insert and pop (86 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: latencystats: bad configure percentiles (4 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: RESTORE returns an error of the key already exists (7 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: latencystats: blocking commands (3 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (29 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: Generic wrong number of args (1 ms) [ok]: latencystats: subcommands (1 ms) [ok]: Regression for quicklist #3343 bug (150 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: Unbalanced number of quotes (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (29 ms) [ok]: reg node check compression combined with trim (33 ms) [ok]: Protocol desync regression test #1 (33 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (4 ms) [ok]: Protocol desync regression test #2 (32 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (23 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: latencystats: measure latency (54 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (30 ms) [ok]: errorstats: failed call authentication error (2 ms) [ok]: Protocol desync regression test #3 (41 ms) [ok]: reg node check compression with lset (40 ms) [ok]: string to double with null terminator (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (3 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: raw protocol response (1 ms) [ok]: No negative zero (5 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: AUTH fails when a wrong password is given (1 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: incr operation should update encoding from raw to int (14 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (27 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: errorstats: rejected call unknown command (5 ms) [ok]: Check compression with recompress (81 ms) [ok]: decr operation should update encoding from raw to int (12 ms) [ok]: RESP3 attributes (1 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (3 ms) [ok]: ZADD XX and NX are not compatible - listpack (6 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: incrby operation should update encoding from raw to int (10 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (1 ms) [ok]: ZADD NX with non existing key - listpack (10 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: decrby operation should update encoding from raw to int (8 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: test big number parsing (2 ms) [ok]: XADD wrong number of args (16 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: test bool parsing (2 ms) [ok]: XREADGROUP will return only new elements (1 ms) [3/92 done]: unit/type/incr (1 seconds) Testing unit/sort [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (95 ms) [ok]: errorstats: blocking commands (2 ms) [ok]: test verbatim str parsing (1 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: DUMP of non existing key returns nil (7 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (24 ms) [ok]: test large number of args (32 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (20 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (10 ms) [ok]: test argument rewriting - issue 9598 (2 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (6 ms) [ok]: XADD IDs are incremental (12 ms) [ok]: XPENDING only group (0 ms) [ok]: XPENDING with IDLE (22 ms) [ok]: ZADD LT and GT are not compatible - listpack (7 ms) [ok]: XPENDING with exclusive range intervals works as expected (0 ms) [ok]: XADD IDs are incremental when ms is the same as well (11 ms) [ok]: XADD IDs correctly report an error when overflowing (2 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (20 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: plain node check compression (107 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (2 ms) [ok]: XADD 0-* should succeed (5 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (2 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (25 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (2 ms) [ok]: plain node check compression with ltrim (46 ms) [ok]: For unauthenticated clients output buffer is limited (157 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (2 ms) [ok]: ZADD INCR LT/GT with inf - listpack (70 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: plain node check compression using lset (27 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (2 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (17 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (2 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (13 ms) [ok]: Blocking XREAD: key deleted (2 ms) [ok]: Blocking XREAD: key type changed with SET (7 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (109 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (17 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (7 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (9 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (25 ms) [ok]: ZADD - Variadic version base case - listpack (13 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (10 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (7 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (13 ms) [ok]: Crash due to wrongly recompress after lrem (240 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (4 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (16 ms) [ok]: ZCARD basics - listpack (17 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (59 ms) [ok]: ZREM removes key after last element is removed - listpack (30 ms) [ok]: MIGRATE is caching connections (276 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (514 ms) [ok]: ZREM variadic version - listpack (27 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (10 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (87 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (72 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (14 ms) [ok]: Regression for a crash with blocking ops and pipelining (13 ms) [ok]: ZRANGE basics - listpack (73 ms) [ok]: Listpack: SORT BY key (3 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (21 ms) [ok]: Listpack: SORT BY key with limit (7 ms) [ok]: Listpack: SORT BY hash field (5 ms) [ok]: SMISMEMBER requires one or more members (13 ms) [ok]: SADD against non set (7 ms) [4/92 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: SADD a non-integer against a small intset (33 ms) [ok]: SCAN basic (726 ms) [ok]: ZREVRANGE basics - listpack (77 ms) [ok]: Test LPUSH and LPOP on plain nodes (102 ms) [ok]: AUTH fails when binary password is wrong (10 ms) [ok]: ZRANK/ZREVRANK basics - listpack (87 ms) [ok]: Test LINDEX and LINSERT on plain nodes (60 ms) [ok]: AUTH succeeds when binary password is correct (16 ms) [ok]: ZRANK - after deletion - listpack (20 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (14 ms) [ok]: Test LTRIM on plain nodes (36 ms) [ok]: ZINCRBY - increment and decrement - listpack (39 ms) [ok]: ZINCRBY return value - listpack (17 ms) [ok]: Test LREM on plain nodes (57 ms) [ok]: EXPIRE - set timeouts multiple times (19 ms) [ok]: EXPIRE - It should be still possible to read 'x' (1 ms) [ok]: Test LPOS on plain nodes (43 ms) [ok]: Test LMOVE on plain nodes (74 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (177 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (39 ms) [ok]: Test LSET with packed / plain combinations (83 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (86 ms) [ok]: Test LSET with packed is split in the middle (90 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (67 ms) [ok]: SADD a non-integer against a large intset (523 ms) [ok]: DEL against expired key (1118 ms) [ok]: EXISTS (10 ms) [ok]: SADD an integer larger than 64 bits (30 ms) [ok]: Zero length value in key. SET/GET/EXISTS (20 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (20 ms) [ok]: Commands pipelining (4 ms) [ok]: Non existing command (3 ms) [ok]: RENAME basic usage (23 ms) [ok]: RENAME source key should no longer exist (5 ms) [ok]: RENAME against already existing key (17 ms) [ok]: Test LSET with packed consist only one item (100 ms) [ok]: RENAMENX basic usage (26 ms) [ok]: RENAMENX against already existing key (17 ms) [ok]: RENAMENX against already existing key (2) (7 ms) [ok]: RENAME against non existing source key (6 ms) [ok]: RENAME where source and dest key are the same (existing) (5 ms) [ok]: Crash due to delete entry from a compress quicklist node (60 ms) [ok]: RENAMENX where source and dest key are the same (existing) (8 ms) [ok]: RENAME where source and dest key are the same (non existing) (10 ms) [ok]: RENAME with volatile key, should move the TTL as well (24 ms) [ok]: Crash due to split quicklist node wrongly (47 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (180 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (30 ms) [ok]: DEL all keys again (DB 0) (16 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1073 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (3 ms) [ok]: DEL all keys again (DB 1) (12 ms) [ok]: RENAME can unblock XREADGROUP with data (2 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (11 ms) [ok]: COPY basic usage for string (38 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (6 ms) [ok]: COPY for string can replace an existing key with REPLACE option (13 ms) [ok]: Quicklist: SORT BY key (9 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: Quicklist: SORT BY hash field (9 ms) [ok]: ZLEXCOUNT advanced - listpack (137 ms) [ok]: COPY for string ensures that copied data is independent of copying data (42 ms) [ok]: COPY for string does not copy data to no-integer DB (12 ms) [ok]: COPY can copy key expire metadata as well (23 ms) [ok]: COPY does not create an expire if it does not exist (27 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (123 ms) [ok]: SCAN COUNT (1034 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (33 ms) [ok]: COPY basic usage for list - quicklist (93 ms) [ok]: LPOS basic usage - quicklist (63 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (17 ms) [ok]: LPOS COUNT option (13 ms) [ok]: LPOS COUNT + RANK option (4 ms) [ok]: LPOS non existing key (2 ms) [ok]: LPOS no match (8 ms) [ok]: LPOS MAXLEN (13 ms) [ok]: COPY basic usage for list - listpack (56 ms) [ok]: LPOS when RANK is greater than matches (8 ms) [ok]: COPY basic usage for $type set (56 ms) [ok]: stats: instantaneous metrics (1604 ms) [ok]: COPY basic usage for $type set (59 ms) [ok]: MASTERAUTH test with binary password (954 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (164 ms) [ok]: LPOP/RPOP with wrong number of arguments (8 ms) [ok]: stats: debug metrics (112 ms) [ok]: COPY basic usage for $type set (72 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (14 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: COPY basic usage for hashtable hash (12 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (79 ms) [ok]: LPOS basic usage - listpack (14 ms) [ok]: SADD an integer larger than 64 bits to a large intset (836 ms) [ok]: XCLAIM can claim PEL items from another consumer (616 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (28 ms) [ok]: LPOS COUNT option (11 ms) [ok]: LPOS COUNT + RANK option (9 ms) [ok]: LPOS non existing key (4 ms) [ok]: LPOS no match (4 ms) [ok]: LPOS MAXLEN (31 ms) [ok]: LPOS when RANK is greater than matches (15 ms) [5/92 done]: unit/auth (3 seconds) Testing unit/other [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (95 ms) [6/92 done]: unit/info (3 seconds) Testing unit/multi [ok]: LPOP/RPOP with wrong number of arguments (13 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (9 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (18 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: COPY basic usage for stream (328 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (4 ms) [ok]: COPY basic usage for stream-cgroups (6 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (8 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (7 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: HRANDFIELD with - hashtable (2415 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Regression for pattern matching very long nested loops (3 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (10 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (7 ms) [ok]: Variadic RPUSH/LPUSH (23 ms) [ok]: DEL a list (7 ms) [ok]: SCAN MATCH (726 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (706 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (17 ms) [ok]: MULTI / EXEC basics (44 ms) [7/92 done]: unit/keyspace (3 seconds) Testing unit/quit [ok]: DISCARD (39 ms) [ok]: BLPOP: single existing list - quicklist (89 ms) [ok]: XCLAIM without JUSTID increments delivery count (411 ms) [ok]: Nested MULTI are not allowed (17 ms) [ok]: MULTI where commands alter argc/argv (33 ms) [ok]: WATCH inside MULTI is not allowed (14 ms) [ok]: Coverage: HELP commands (65 ms) [ok]: Coverage: MEMORY MALLOC-STATS (7 ms) [ok]: QUIT returns OK (13 ms) [ok]: Coverage: MEMORY PURGE (9 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (43 ms) [ok]: Pipelined commands after QUIT must not be executed (19 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (18 ms) [ok]: SAVE - make sure there are all the types as values (54 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (50 ms) [ok]: SCAN TYPE (235 ms) [ok]: ZREMRANGEBYRANK basics - listpack (224 ms) [ok]: ZREMRANGEBYLEX basics - listpack (10 ms) [ok]: BLPOP: multiple existing lists - quicklist (167 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (4 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (27 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (1 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (4 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (1 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: EXEC works on WATCHed key not modified (19 ms) [ok]: XCLAIM same consumer (209 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (23 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (23 ms) [ok]: SCAN unknown type (101 ms) [ok]: BLPOP: second list has an entry - quicklist (90 ms) [8/92 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (36 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (90 ms) [ok]: SCAN with expired keys (105 ms) [ok]: EXEC fail on lazy expired WATCHed key (140 ms) [ok]: SCAN with expired keys with TYPE filter (90 ms) [ok]: SSCAN with encoding intset (1 ms) [ok]: SSCAN with encoding listpack (1 ms) [ok]: SSCAN with encoding hashtable (3 ms) [ok]: HSCAN with encoding listpack (1 ms) [ok]: WATCH stale keys should not fail EXEC (47 ms) [ok]: Very big payload random access (2928 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2112 ms) [ok]: EXPIRE - write on expire should work (17 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (163 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (10 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (50 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (3 ms) [ok]: HSCAN with encoding hashtable (70 ms) [ok]: SETEX - Check value (10 ms) [ok]: ZSCAN with encoding listpack (8 ms) [ok]: SETEX - Overwrite old key (10 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (43 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (84 ms) [ok]: After successful EXEC key is no longer watched (47 ms) [ok]: ZSCAN with encoding skiplist (73 ms) [ok]: SCAN guarantees check under write load (27 ms) [ok]: SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: HSCAN with PATTERN (0 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: After failed EXEC key is no longer watched (53 ms) [ok]: BRPOPLPUSH - quicklist (81 ms) [ok]: It is possible to UNWATCH (28 ms) [ok]: UNWATCH when there is nothing watched works as expected (3 ms) [ok]: XADD with MAXLEN option (2974 ms) [ok]: FLUSHALL is able to touch the watched keys (20 ms) [ok]: FLUSHALL does not touch non affected keys (20 ms) [ok]: FLUSHDB is able to touch the watched keys (20 ms) [ok]: BLMOVE left left - quicklist (92 ms) [ok]: FLUSHDB does not touch non affected keys (20 ms) [ok]: SWAPDB is able to touch the watched keys that exist (23 ms) [ok]: XADD with MAXLEN option and the '=' argument (107 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (618 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (30 ms) [ok]: HRANDFIELD with - listpack (986 ms) [ok]: SWAPDB does not touch watched stale keys (40 ms) [ok]: BLMOVE left right - quicklist (120 ms) [ok]: XADD with MAXLEN option and the '~' argument (87 ms) [ok]: XADD with NOMKSTREAM option (0 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (44 ms) [ok]: HSET/HLEN - Big hash creation (87 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (0 ms) [ok]: BLMOVE right left - quicklist (74 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (50 ms) [ok]: WATCH is able to remember the DB a key belongs to (30 ms) [ok]: XADD with MINID option (103 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: HGET against the big hash (66 ms) [ok]: HGET against non existing key (0 ms) [ok]: WATCH will consider touched keys target of EXPIRE (26 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (1 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: BLMOVE right right - quicklist (59 ms) [ok]: XAUTOCLAIM as an iterator (203 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: BLPOP: single existing list - listpack (20 ms) [ok]: XAUTOCLAIM with XDEL (11 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XINFO FULL output (3 ms) [ok]: BLPOP: multiple existing lists - listpack (26 ms) [ok]: HMSET - big hash (55 ms) [ok]: HMGET against non existing key and fields (1 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (1 ms) [ok]: BLPOP: second list has an entry - listpack (14 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (20 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (1549 ms) [ok]: HMGET - big hash (54 ms) [ok]: HKEYS - small hash (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (16 ms) [ok]: HKEYS - big hash (9 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (40 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (2 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (23 ms) [ok]: HGETALL - small hash (14 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (43 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: HGETALL - big hash (33 ms) [ok]: ZSCAN scores: regression test for issue #2175 (576 ms) [ok]: BRPOPLPUSH - listpack (47 ms) [ok]: HDEL and return value (13 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY against non existing hash key (1 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (1 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (43 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (1 ms) [ok]: BLMOVE left left - listpack (40 ms) [ok]: Consumer seen-time and active-time (217 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (5 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: HSTRLEN against the big hash (59 ms) [ok]: HSTRLEN against non existing field (1 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [ok]: BLMOVE left right - listpack (36 ms) [ok]: Hash fuzzing #1 - 10 fields (22 ms) [ok]: BLMOVE right left - listpack (27 ms) [ok]: Hash fuzzing #2 - 10 fields (17 ms) [ok]: BLMOVE right right - listpack (13 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (23 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (23 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (27 ms) [ok]: Set encoding after DEBUG RELOAD (183 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (37 ms) [ok]: SREM basics - $type (43 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (19 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (9 ms) [ok]: BLPOP with variadic LPUSH (13 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (7 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (2 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (5 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (7 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (11 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (6 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (20 ms) [ok]: BRPOPLPUSH with wrong source type (13 ms) [ok]: Big Quicklist: SORT BY key (509 ms) [ok]: XREADGROUP with NOACK creates consumer (92 ms) [ok]: Big Quicklist: SORT BY key with limit (12 ms) [ok]: BRPOPLPUSH with wrong destination type (34 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (19 ms) [ok]: BRPOPLPUSH with multiple blocked clients (25 ms) [ok]: SETEX - Wait for the key to expire (1107 ms) [ok]: SETEX - Wrong time parameter (1 ms) [ok]: PERSIST can undo an EXPIRE (6 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (5 ms) [ok]: BLMPOP with multiple blocked clients (38 ms) [ok]: Linked LMOVEs (11 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (6 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1241 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (28 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (16 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (203 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (3 ms) [ok]: Consumer group lag with XDELs (24 ms) [ok]: Consumer Group Lag with XDELs and tombstone after the last_id of consume group (2 ms) [ok]: Consumer group lag with XTRIM (3 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (0 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: WATCH will consider touched expired keys (1100 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (36 ms) [ok]: SREM basics - $type (717 ms) [ok]: DISCARD should UNWATCH all the keys (33 ms) [ok]: SREM basics - intset (39 ms) [ok]: SREM with multiple arguments (33 ms) [ok]: SREM variadic version with more args needed to destroy the key (20 ms) [ok]: MULTI / EXEC is not propagated (single write command) (134 ms) [ok]: SINTERCARD with illegal arguments (66 ms) [ok]: Big Quicklist: SORT BY hash field (753 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: SINTERCARD against non-set should throw error (36 ms) [ok]: SINTERCARD against non-existing key (20 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (123 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (210 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (120 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (60 ms) [ok]: Hash table: SORT BY key (10 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (215 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: Hash table: SORT BY hash field (18 ms) [ok]: EXPIRE precision is now the millisecond (1106 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (137 ms) [ok]: BRPOPLPUSH timeout (1039 ms) [ok]: Hash fuzzing #1 - 512 fields (1465 ms) [ok]: SWAPDB awakes blocked client (43 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (96 ms) [ok]: PSETEX can set sub-second expires (112 ms) [ok]: MULTI / EXEC with REPLICAOF (120 ms) [ok]: PEXPIRE can set sub-second expires (110 ms) [ok]: DISCARD should not fail during OOM (37 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (327 ms) [ok]: PEXPIREAT can set sub-second expires (223 ms) [ok]: TTL returns time to live in seconds (13 ms) [ok]: PTTL returns time to live in milliseconds (7 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (14 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (16 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (10 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (200 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (14 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (101 ms) [ok]: MULTI and script timeout (473 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (410 ms) [ok]: ZDIFF fuzzing - listpack (3466 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (2 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (1 ms) [ok]: XADD mass insertion and XLEN (2702 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (1 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (2 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (1 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (2 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (2 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (1 ms) [ok]: ZINCRBY - increment and decrement - skiplist (0 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (3 ms) [ok]: FUZZ stresser with data model binary (3603 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (5 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (8 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (4 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (12 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (1 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - skiplist (1 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (240 ms) [ok]: Redis should actively expire keys incrementally (544 ms) [ok]: Hash fuzzing #2 - 512 fields (1172 ms) [ok]: EXEC and script timeout (479 ms) [9/92 done]: unit/type/stream-cgroups (7 seconds) Testing unit/acl [ok]: XRANGE can be used to iterate the whole stream (494 ms) [ok]: Connections start with the default user (5 ms) [ok]: It is possible to create new users (7 ms) [ok]: Coverage: ACL USERS (5 ms) [ok]: Usernames can not contain spaces or null characters (1 ms) [ok]: New users start disabled (10 ms) [ok]: Enabling the user allows the login (24 ms) [ok]: Only the set of correct passwords work (15 ms) [ok]: It is possible to remove passwords from the set of valid ones (15 ms) [ok]: Test password hashes can be added (12 ms) [ok]: Test password hashes validate input (13 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (5 ms) [ok]: Test hashed passwords removal (15 ms) [ok]: By default users are not able to access any command (2 ms) [ok]: By default users are not able to access any key (14 ms) [ok]: It's possible to allow the access of a subset of keys (20 ms) [ok]: By default, only default user is able to publish to any channel (23 ms) [ok]: By default, only default user is not able to publish to any shard channel (19 ms) [ok]: By default, only default user is able to subscribe to any channel (17 ms) [ok]: MULTI-EXEC body and script timeout (476 ms) [ok]: By default, only default user is able to subscribe to any shard channel (33 ms) [ok]: By default, only default user is able to subscribe to any pattern (17 ms) [ok]: It's possible to allow publishing to a subset of channels (14 ms) [ok]: It's possible to allow publishing to a subset of shard channels (23 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (31 ms) [ok]: FUZZ stresser with data model alpha (852 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (53 ms) [ok]: SETNX against expired volatile key (2905 ms) [ok]: It's possible to allow subscribing to a subset of channels (33 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (1 ms) [ok]: GETEX and GET expired key or not exist (2 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1137 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (41 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (24 ms) [ok]: BLPOP when new key is moved into place (30 ms) [ok]: Subscribers are killed when revoked of channel permission (41 ms) [ok]: BLPOP when result key is created by SORT..STORE (43 ms) [ok]: Subscribers are killed when revoked of channel permission (32 ms) [ok]: BLMPOP_LEFT when new key is moved into place (30 ms) [ok]: GETDEL propagate as DEL command to replica (161 ms) [ok]: Redis should lazy expire keys (1032 ms) [ok]: Subscribers are killed when revoked of pattern permission (39 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (40 ms) [ok]: BLPOP: timeout value out of range (7 ms) [ok]: Subscribers are killed when revoked of allchannels permission (37 ms) [ok]: BLPOP: with single empty list argument (33 ms) [ok]: just EXEC and script timeout (467 ms) [ok]: BLPOP: with negative timeout (13 ms) [ok]: BLPOP: with non-integer timeout (20 ms) [ok]: GETEX without argument does not propagate to replica (103 ms) [ok]: MGET (9 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (1 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (1 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: BLPOP: with zero timeout should block indefinitely (17 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (56 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (1 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (0 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (7 ms) [ok]: exec with write commands and state change (50 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (47 ms) [ok]: blocked command gets rejected when reprocessed after permission change (50 ms) [ok]: BLPOP: second argument is not a list (23 ms) [ok]: Users can be configured to authenticate with any password (13 ms) [ok]: ACLs can exclude single commands (17 ms) [ok]: exec with read commands and stale replica state change (103 ms) [ok]: ACLs can include or exclude whole classes of commands (26 ms) [ok]: ACLs can include single subcommands (27 ms) [ok]: EXEC with only read commands should not be rejected when OOM (47 ms) [ok]: ACLs can exclude single subcommands, case 1 (26 ms) [ok]: ACLs can exclude single subcommands, case 2 (19 ms) [ok]: EXEC with at least one use-memory command should fail (43 ms) [ok]: ACLs cannot include a subcommand with a specific arg (10 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (13 ms) [ok]: ACLs cannot exclude or include a container command with two args (18 ms) [ok]: ACLs including of a type includes also subcommands (19 ms) [ok]: Blocking commands ignores the timeout (67 ms) [ok]: ACLs can block SELECT of all but a specific DB (22 ms) [ok]: FUZZ stresser with data model compr (709 ms) [ok]: ACLs can block all DEBUG subcommands except one (37 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (1352 ms) [ok]: ACLs set can include subcommands, if already full command exists (46 ms) [ok]: Generated sets must be encoded correctly - regular (30 ms) [ok]: SINTER with two sets - regular (7 ms) [ok]: MULTI propagation of PUBLISH (146 ms) [ok]: SINTERCARD with two sets - regular (16 ms) [ok]: SINTERSTORE with two sets - regular (13 ms) [ok]: Hash ziplist of various encodings (94 ms) [ok]: Hash ziplist of various encodings - sanitize dump (3 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (97 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (58 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (26 ms) [ok]: SUNION with two sets - regular (22 ms) [ok]: MULTI propagation of SCRIPT LOAD (113 ms) [ok]: ACL GETUSER is able to translate back command permissions (17 ms) [ok]: SUNIONSTORE with two sets - regular (29 ms) [ok]: SINTER against three sets - regular (4 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (16 ms) [ok]: SINTERCARD against three sets - regular (16 ms) [ok]: SINTERSTORE with three sets - regular (9 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (30 ms) [ok]: SUNION with non existing keys - regular (22 ms) [10/92 done]: unit/type/hash (8 seconds) Testing unit/acl-v2 [ok]: SDIFF with two sets - regular (7 ms) [ok]: SDIFF with three sets - regular (3 ms) [ok]: MULTI propagation of EVAL (100 ms) [ok]: SDIFFSTORE with three sets - regular (10 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (27 ms) [ok]: MULTI propagation of SCRIPT FLUSH (113 ms) [ok]: Test basic multiple selectors (7 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (2 ms) [ok]: Test selector syntax error reports the error in the selector context (10 ms) [ok]: MULTI propagation of XREADGROUP (130 ms) [ok]: Test flexible selector definition (23 ms) [ok]: Test separate read permission (2 ms) [ok]: Test separate write permission (4 ms) [ok]: MULTI with SAVE (33 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (1 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (1 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (1 ms) [ok]: Test separate read and write permissions (37 ms) [ok]: Validate read and write permissions format - empty permission (0 ms) [ok]: Validate read and write permissions format - empty selector (2 ms) [ok]: Validate read and write permissions format - empty pattern (0 ms) [ok]: Validate read and write permissions format - no pattern (3 ms) [ok]: MULTI with SHUTDOWN (40 ms) [ok]: Test separate read and write permissions on different selectors are not additive (14 ms) [ok]: BGSAVE (196 ms) [ok]: SELECT an out of range DB (1 ms) [ok]: Test SET with separate read permission (23 ms) [ok]: Test SET with separate write permission (2 ms) [ok]: Test SET with read and write permissions (2 ms) [ok]: Test BITFIELD with separate read permission (2 ms) [ok]: Test BITFIELD with separate write permission (2 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (2 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (2 ms) [ok]: ACL GETUSER provides reasonable results (456 ms) [ok]: Test various commands for command permissions (8 ms) [ok]: Test various odd commands for key permissions (5 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (13 ms) [ok]: Test general keyspace commands require some type of permission to execute (5 ms) [ok]: Cardinality commands require some type of permission to execute (3 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (17 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: ACL GETUSER provides correct results (143 ms) [ok]: ACL CAT with illegal arguments (10 ms) [ok]: ACL CAT without category - list all categories (6 ms) [ok]: MULTI with BGREWRITEAOF (217 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (20 ms) [ok]: BLPOP: timeout (1112 ms) [ok]: BLPOP: arguments are empty (2 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (24 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (13 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (27 ms) [ok]: BRPOP: second argument is not a list (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (131 ms) [ok]: ACL LOG shows failed command executions at toplevel (40 ms) [ok]: MULTI with config set appendonly (237 ms) [ok]: Test behavior of loading ACLs (13 ms) [ok]: MULTI with config error (23 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (43 ms) [ok]: Flushall while watching several keys by one client (33 ms) [ok]: ACL LOG is able to test similar events (36 ms) [ok]: ACL LOG is able to log keys access violations and key name (19 ms) [ok]: ACL LOG is able to log channel access violations and channel name (24 ms) [11/92 done]: unit/acl-v2 (1 seconds) Testing unit/latency-monitor [ok]: ACL LOG RESET is able to flush the entries in the log (9 ms) [ok]: ACL LOG can distinguish the transaction context (1) (35 ms) [ok]: ACL LOG can distinguish the transaction context (2) (52 ms) [ok]: Big Hash table: SORT BY key (898 ms) [ok]: ACL can log errors in the context of Lua scripting (22 ms) [ok]: Big Hash table: SORT BY key with limit (23 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (35 ms) [ok]: ACL LOG can log failed auth attempts (12 ms) [ok]: ACL LOG entries are limited to a maximum amount (76 ms) [ok]: LATENCY HISTOGRAM with empty histogram (9 ms) [ok]: When default user is off, new connections are not authenticated (16 ms) [ok]: LATENCY HISTOGRAM all commands (20 ms) [ok]: When default user has no command permission, hello command still works for other users (27 ms) [ok]: LATENCY HISTOGRAM sub commands (33 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (40 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (20 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (43 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (17 ms) [ok]: ACL HELP should not have unexpected options (6 ms) [ok]: LATENCY HISTOGRAM command (30 ms) [ok]: Delete a user that the client doesn't use (17 ms) [ok]: Delete a user that the client is using (18 ms) [ok]: ACL GENPASS command failed test (9 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (40 ms) [ok]: Default user can not be removed (7 ms) [ok]: MULTI with FLUSHALL and AOF (57 ms) [ok]: ACL load non-existing configured ACL file (3 ms) [ok]: XREVRANGE returns the reverse of XRANGE (2684 ms) [ok]: XRANGE exclusive ranges (3 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: ACL-Metrics user AUTH failure (80 ms) [ok]: ACL-Metrics invalid command accesses (64 ms) [12/92 done]: unit/multi (7 seconds) Testing integration/block-repl [ok]: Check consistency of different data types after a reload (1134 ms) [ok]: ACL-Metrics invalid key accesses (63 ms) [ok]: ACL-Metrics invalid channels accesses (59 ms) [ok]: LTRIM stress testing - quicklist (9908 ms) [ok]: BRPOP: timeout (1090 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (0 ms) [ok]: BLMPOP_LEFT: with negative timeout (0 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (0 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (0 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (32 ms) [ok]: BLMPOP_LEFT: second argument is not a list (0 ms) [ok]: Same dataset digest if saving/reloading as AOF? (295 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (87 ms) [ok]: Big Hash table: SORT BY hash field (885 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (1 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (3 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (1 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (7 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (19 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (1 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: default: load from include file, can access any channels (26 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (33 ms) [ok]: SORT speed, 100 element list BY key, 100 times (32 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (31 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (33 ms) [ok]: Alice: can execute all command (20 ms) [ok]: SORT speed, 100 element list directly, 100 times (24 ms) [ok]: Bob: just execute @set and acl command (20 ms) [ok]: SORT speed, 100 element list BY , 100 times (20 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: ACL load and save (62 ms) [ok]: ZDIFF fuzzing - skiplist (3980 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: ACL load and save with restricted channels (63 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (3 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (1 ms) [13/92 done]: unit/sort (10 seconds) Testing integration/replication [ok]: ZMPOP propagate as pop with count command to replica (40 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (203 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: Default user has access to all channels irrespective of flag (9 ms) [ok]: Slave enters handshake (7 ms) [ok]: Slave enters wait_bgsave (6 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (43 ms) [ok]: Single channel is valid (7 ms) [ok]: Single channel is not valid with allchannels (8 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: XREAD with non empty second stream (1275 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (18 ms) [ok]: SUNION with two sets - intset (6 ms) [ok]: SUNIONSTORE with two sets - intset (6 ms) [ok]: Blocking XREAD will not reply with an empty array (23 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (10167 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (26 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: BZMPOP readraw in RESP3 (202 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (91 ms) [ok]: XREAD: XADD + DEL should not awake client (2 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (2 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (6 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (1 ms) [ok]: BLMPOP_LEFT: timeout (1096 ms) [ok]: First server should have role slave after SLAVEOF (1010 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (35 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (201 ms) [ok]: ZMPOP readraw in RESP2 (2 ms) [ok]: Only default user has access to all channels irrespective of flag (10 ms) [ok]: BZMPOP readraw in RESP2 (203 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2696 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (6 ms) [ok]: ZUNIONSTORE result is sorted (152 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (1 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (24 ms) [ok]: ZMSCORE - listpack (23 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (37 ms) [ok]: ZSET sorting stresser - listpack (37 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (53 ms) [ok]: First server should have role slave after REPLICAOF (14 ms) [ok]: default: load from config file with all channels permissions (11 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (126 ms) [ok]: Test loading an ACL file with duplicate users (13 ms) [ok]: Test loading an ACL file with duplicate default user (7 ms) [ok]: Test loading duplicate users in config on startup (12 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (353 ms) [ok]: BLMPOP_RIGHT: timeout (1095 ms) [ok]: BLMPOP_RIGHT: arguments are empty (1 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2121 ms) [ok]: SCAN regression test for issue #4906 (8368 ms) [ok]: ACL from config file and config rewrite (131 ms) [14/92 done]: unit/scan (13 seconds) Testing integration/replication-2 [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: BLMPOP propagate as pop with count command to replica (204 ms) [ok]: LPUSHX, RPUSHX - generic (0 ms) [ok]: XDEL fuzz test (1478 ms) [15/92 done]: unit/acl (6 seconds) Testing integration/replication-3 [ok]: LPUSHX, RPUSHX - quicklist (44 ms) [ok]: LINSERT - quicklist (43 ms) [ok]: LPUSHX, RPUSHX - listpack (9 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (1 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (80 ms) [ok]: LINDEX random access - listpack (57 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (104 ms) [ok]: First server should have role slave after SLAVEOF (120 ms) [ok]: If min-slaves-to-write is honored, write is accepted (23 ms) [ok]: No write if min-slaves-to-write is < attached slaves (17 ms) [ok]: First server should have role slave after SLAVEOF (110 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (23 ms) [ok]: LINDEX consistency test - listpack (110 ms) [ok]: LINDEX random access - listpack (75 ms) [ok]: Test latency events logging (3443 ms) [ok]: LATENCY HISTORY output is ok (7 ms) [ok]: LATENCY LATEST output is ok (7 ms) [ok]: LATENCY GRAPH can output the event graph (5 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (159 ms) [ok]: LINDEX consistency test - quicklist (53 ms) [ok]: LINDEX random access - quicklist (36 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (85 ms) [ok]: LINDEX consistency test - quicklist (106 ms) [ok]: LINDEX random access - quicklist (76 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (152 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (42 ms) [ok]: LMOVE left left base case - quicklist (48 ms) [ok]: LMOVE left right base case - quicklist (94 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (2301 ms) [ok]: LMOVE right left base case - quicklist (117 ms) [ok]: SDIFF fuzzing (3011 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (2 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (1 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (2 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (0 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (6 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: SRANDMEMBER - intset (7 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (2 ms) [ok]: SPOP with - intset (3 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (3 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (2 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: SPOP new implementation: code path #3 intset (2 ms) [ok]: SPOP new implementation: code path #1 listpack (2 ms) [ok]: SPOP new implementation: code path #2 listpack (2 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (1772 ms) [ok]: LMOVE right right base case - quicklist (106 ms) [ok]: APPEND basics (20 ms) [ok]: APPEND basics, integer encoded values (43 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (112 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (183 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (83 ms) [ok]: SRANDMEMBER with - listpack (20 ms) [ok]: SRANDMEMBER with - intset (19 ms) [ok]: SRANDMEMBER with - hashtable (25 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (93 ms) [ok]: SRANDMEMBER histogram distribution - listpack (77 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (93 ms) [ok]: SRANDMEMBER histogram distribution - intset (79 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2013 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (283 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (79 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (96 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (25 ms) [ok]: SETBIT fuzzing (6785 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (69 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: EXPIRE with NX option on a key with ttl (1 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: EXPIRE with NX option on a key without ttl (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: SETRANGE against non-existing key (0 ms) [ok]: EXPIRE with XX option on a key without ttl (1 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: SETRANGE against integer-encoded key (2 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (87 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: Redis should not propagate the read command on lazy expire (98 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (103 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (163 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (113 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (174 ms) [16/92 done]: unit/expire (14 seconds) Testing integration/replication-4 [ok]: LMOVE left right with quicklist source and existing target quicklist (170 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (166 ms) [ok]: First server should have role slave after SLAVEOF (13 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (810 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (174 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (110 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (123 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2817 ms) [ok]: MIGRATE cached connections are released after some time (15006 ms) [ok]: min-slaves-to-write is ignored by slaves (29 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (127 ms) [ok]: GETRANGE fuzzing (1342 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (5 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (1 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (1 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (113 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (127 ms) [ok]: MIGRATE is able to migrate a key between two instances (297 ms) [17/92 done]: unit/type/string (16 seconds) Testing integration/replication-psync [ok]: RPOPLPUSH base case - listpack (80 ms) [ok]: LMOVE left left base case - listpack (73 ms) [ok]: LMOVE left right base case - listpack (70 ms) [ok]: LMOVE right left base case - listpack (67 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1014 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: MIGRATE is able to copy a key between two instances (317 ms) [ok]: LMOVE right right base case - listpack (73 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (43 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (50 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (37 ms) [ok]: Slave should be able to synchronize with the master (127 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (27 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (33 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (110 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (423 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (107 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (93 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (100 ms) [ok]: MIGRATE propagates TTL correctly (310 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (94 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (46 ms) [ok]: LMOVE left left with listpack source and existing target listpack (54 ms) [ok]: LMOVE left right with listpack source and existing target listpack (50 ms) [ok]: LMOVE right left with listpack source and existing target listpack (53 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (60 ms) [ok]: RPOPLPUSH against non existing key (16 ms) [ok]: RPOPLPUSH against non list src key (23 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (80 ms) [ok]: RPOPLPUSH against non list dst key - listpack (43 ms) [ok]: RPOPLPUSH against non existing src key (6 ms) [ok]: Detect write load to master (1017 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (57 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (164 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (80 ms) [ok]: LPOP/RPOP/LMPOP against empty list (36 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (67 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (14950 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1007 ms) [ok]: ZSCORE - skiplist (28 ms) [ok]: ZMSCORE - skiplist (38 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (69 ms) [ok]: Slave should be able to synchronize with the master (120 ms) [ok]: ZSET sorting stresser - skiplist (26 ms) [ok]: Mass RPOP/LPOP - listpack (1970 ms) [ok]: LATENCY GRAPH can output the expire event graph (6 ms) [ok]: LATENCY of expire events are correctly collected (7175 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (10 ms) [ok]: LATENCY DOCTOR produces some output (6 ms) [ok]: LATENCY RESET is able to reset events (7 ms) [ok]: LATENCY HELP should not have unexpected options (10 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1814 ms) [ok]: Test replication with parallel clients writing in different DBs (5089 ms) [18/92 done]: unit/latency-monitor (12 seconds) Testing integration/replication-buffer [ok]: MASTER and SLAVE consistency with expire (7544 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (161 ms) [ok]: Detect write load to master (2020 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (210 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (9727 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (245 ms) [ok]: Mass RPOP/LPOP - listpack (888 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (23 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: LMPOP single existing list - quicklist (131 ms) [ok]: Slave is able to detect timeout during handshake (1 ms) [ok]: LMPOP multiple existing lists - quicklist (176 ms) [ok]: LMPOP single existing list - listpack (3 ms) [ok]: LMPOP multiple existing lists - listpack (2 ms) [ok]: LMPOP propagate as pop with count command to replica (111 ms) [ok]: First server should have role slave after SLAVEOF (117 ms) [ok]: LRANGE basics - quicklist (43 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (20 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (20 ms) [ok]: With min-slaves-to-write function without no-write flag (13 ms) [ok]: LRANGE inverted indexes - quicklist (43 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (30 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (43 ms) [ok]: LRANGE out of range negative end index - quicklist (44 ms) [ok]: LRANGE basics - listpack (2 ms) [ok]: LRANGE inverted indexes - listpack (0 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (766 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: Set instance A as slave of B (134 ms) [ok]: INCRBYFLOAT replication, should not remove expire (38 ms) [ok]: LTRIM basics - quicklist (527 ms) [ok]: GETSET replication (79 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (40 ms) [ok]: LTRIM out of range negative end index - quicklist (86 ms) [ok]: LSET - quicklist (43 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (16 ms) [ok]: LTRIM out of range negative end index - listpack (2 ms) [ok]: LSET - listpack (0 ms) [ok]: LSET out of range index - listpack (1 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (45 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (43 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (1 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (43 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (1 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (3 ms) [ok]: LREM deleting objects that may be int encoded - listpack (0 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (2 ms) [ok]: BLPOP/BLMOVE should increase dirty (6 ms) [ok]: client unblock tests (15 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (3 ms) [ok]: List listpack -> quicklist encoding conversion (172 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1028 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: List quicklist -> listpack encoding conversion (221 ms) [ok]: List encoding conversion when RDB loading (80 ms) [ok]: List invalid list-max-listpack-size config (86 ms) [ok]: List of various encodings (90 ms) [ok]: List of various encodings - sanitize dump (3 ms) [ok]: Unblock fairness is kept while pipelining (14 ms) [ok]: Unblock fairness is kept during nested unblock (3 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: Blocking command accounted only once in commandstats after timeout (12 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (69 ms) [ok]: BRPOPLPUSH replication, list exists (1054 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (42 ms) [19/92 done]: unit/type/list (23 seconds) Testing integration/shutdown [ok]: APPEND fuzzing (9409 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1008 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: All replicas share one global replication buffer (397 ms) [ok]: Replication buffer will become smaller when no replica uses (49 ms) [ok]: FLUSHDB (197 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (13 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2560 ms) [ok]: SRANDMEMBER with a dict containing long chain (9638 ms) [ok]: SMOVE basics - from regular set to intset (12 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (5 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (8 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: BLMOVE (left, left) replication, list exists (1069 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (44 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1007 ms) [ok]: BZPOP/BZMPOP against wrong type (0 ms) [ok]: BZMPOP with illegal argument (12 ms) [ok]: BZMPOP with multiple blocked clients (11 ms) [ok]: First server should have role slave after SLAVEOF (123 ms) [ok]: BZMPOP propagate as pop with count command to replica (193 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (3 ms) [ok]: Don't rehash if redis has child process (970 ms) [ok]: BLMOVE (left, right) replication, list exists (1063 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (37 ms) [ok]: Replication of an expired key does not delete the expired key (596 ms) [ok]: Process title set as expected (29 ms) [20/92 done]: unit/other (23 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (9 ms) [ok]: ZSET skiplist order consistency when elements are moved (996 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (1 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (4 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (1 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (0 ms) [ok]: ZRANDMEMBER - listpack (6 ms) [ok]: ZRANDMEMBER - skiplist (8 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: Short read: Server should start if load-truncated is yes (8 ms) [ok]: ZRANDMEMBER with - skiplist (209 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (9 ms) [ok]: Append a new command after loading an incomplete AOF (6 ms) [ok]: First server should have role slave after SLAVEOF (13 ms) [ok]: Short read + command: Server should start (13 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (6 ms) [ok]: BLMOVE (right, left) replication, list exists (1056 ms) [ok]: ZRANDMEMBER with - listpack (235 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (13 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (5 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (67 ms) [ok]: Bad format: Server should have logged an error (33 ms) [21/92 done]: unit/type/zset (27 seconds) Testing integration/aof-race [ok]: Slave is able to evict keys created in writable slaves (6043 ms) [ok]: Writable replica doesn't return expired keys (102 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: Unfinished MULTI: Server should have logged an error (13 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (105 ms) [ok]: Short read: Server should have logged an error (10 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6519 ms) [ok]: Short read: Utility should confirm the AOF is not valid (63 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (20 ms) [ok]: Short read: Utility should be able to fix the AOF (13 ms) [ok]: intsets implementation stress testing (3050 ms) [22/92 done]: integration/replication-3 (14 seconds) Testing integration/aof-multi-part [ok]: Shutting down master waits for replica to catch up (sigterm) (4019 ms) [ok]: Fixed AOF: Server should have been started (9 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (53 ms) [23/92 done]: unit/type/set (28 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when some file missing (245 ms) [ok]: BLMOVE (right, right) replication, list exists (1044 ms) [ok]: test old version rdb file (14 ms) [ok]: AOF+SPOP: Server should have been started (6 ms) [ok]: AOF+SPOP: Set should have 1 member (13 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (130 ms) [ok]: BLPOP followed by role change, issue #2473 (260 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (227 ms) [ok]: LTRIM stress testing - listpack (17913 ms) [ok]: AOF+SPOP: Server should have been started (10 ms) [ok]: AOF+SPOP: Set should have 1 member (13 ms) [24/92 done]: unit/type/list-2 (28 seconds) Testing integration/corrupt-dump [ok]: Slave should be able to synchronize with the master (127 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (230 ms) [ok]: AOF+EXPIRE: Server should have been started (9 ms) [ok]: AOF+EXPIRE: List should be empty (13 ms) [ok]: RDB encoding loading test (306 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (246 ms) [ok]: corrupt payload: #7445 - with sanitize (331 ms) [ok]: Second server should have role master at first (4 ms) [ok]: SLAVEOF should start with link status "down" (20 ms) [ok]: The role should immediately be changed to "replica" (7 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (3 ms) [ok]: Sync should have transferred keys from master (7 ms) [ok]: The link status should be up (3 ms) [ok]: SET on the master should immediately propagate (13 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (234 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (309 ms) [ok]: Server started empty with non-existing RDB file (6 ms) [ok]: FLUSHDB / FLUSHALL should replicate (232 ms) [ok]: ROLE in master reports master with a slave (5 ms) [ok]: ROLE in slave reports slave in connected state (3 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (246 ms) [ok]: Detect write load to master (1010 ms) [ok]: Server started empty with empty RDB file (7 ms) [ok]: corrupt payload: invalid zlbytes header (411 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (267 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (217 ms) [ok]: XRANGE fuzzing (16814 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (1 ms) [ok]: corrupt payload: valid zipped hash header, dup records (286 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (110 ms) [ok]: XTRIM with MAXLEN option basic test (121 ms) [ok]: XADD with LIMIT consecutive calls (11 ms) [ok]: XTRIM with ~ is limited (10 ms) [ok]: XTRIM without ~ is not limited (12 ms) [ok]: XTRIM without ~ and with LIMIT (12 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: corrupt payload: quicklist big ziplist prev len (189 ms) [ok]: Replication backlog size can outgrow the backlog limit config (4423 ms) [ok]: Multi Part AOF can start when no aof and no manifest (350 ms) [ok]: corrupt payload: quicklist small ziplist prev len (411 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (9266 ms) [ok]: Test RDB stream encoding (620 ms) [ok]: Test RDB stream encoding - sanitize dump (32 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (323 ms) [ok]: MIGRATE can correctly transfer large values (13055 ms) [ok]: Server should not start if RDB file can't be open (9 ms) [ok]: corrupt payload: quicklist ziplist wrong count (305 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (505 ms) [ok]: Server should not start if RDB is corrupted (12 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (340 ms) [ok]: MIGRATE can correctly transfer hashes (297 ms) [25/92 done]: integration/aof-race (4 seconds) Testing integration/corrupt-dump-fuzzer [ok]: corrupt payload: #3080 - quicklist (308 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (220 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (196 ms) [ok]: corrupt payload: quicklist with empty ziplist (313 ms) [ok]: XADD with MINID > lastid can propagate correctly (469 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (331 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (326 ms) [ok]: MIGRATE timeout actually works (808 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (4170 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (327 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (333 ms) [ok]: MIGRATE can migrate multiple keys at once (308 ms) [ok]: MIGRATE with multiple keys must have empty key arg (3 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (342 ms) [ok]: Test FLUSHALL aborts bgsave (1233 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (342 ms) [ok]: corrupt payload: #3080 - ziplist (433 ms) [ok]: bgsave resets the change counter (127 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (284 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (580 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (264 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (173 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (452 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (3162 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (412 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (566 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (284 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (103 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (581 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (420 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (438 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (437 ms) [26/92 done]: unit/dump (33 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (1207 ms) [ok]: corrupt payload: listpack invalid size header (350 ms) [ok]: RDB load zipmap hash: converts to listpack (5 ms) [ok]: corrupt payload: listpack too long entry len (313 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (414 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (21 ms) [ok]: Shutting down master waits for replica timeout (2666 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (18394 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (262 ms) [ok]: corrupt payload: listpack very long entry len (283 ms) [ok]: XADD with ~ MINID can propagate correctly (697 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (10 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (234 ms) [27/92 done]: integration/replication-2 (22 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: corrupt payload: listpack too long entry prev len (344 ms) [28/92 done]: integration/convert-zipmap-hash-on-load (2 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: client freed during loading (2483 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (14 ms) [ok]: AOF fsync always barrier issue (5866 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (26 ms) [ok]: corrupt payload: stream with duplicate consumers (429 ms) [ok]: AOF enable will create manifest file (344 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (13 ms) [ok]: GETEX should not append to AOF (32 ms) [29/92 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/logging [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: hash ziplist with duplicate records (252 ms) [30/92 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: Crash report generated on SIGABRT (17 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (554 ms) [ok]: Unknown command: Server should have logged an error (8 ms) [ok]: corrupt payload: hash listpack with duplicate records (433 ms) [ok]: Crash report generated on DEBUG SEGFAULT (51 ms) [31/92 done]: integration/logging (1 seconds) Testing integration/psync2-reg [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (180 ms) [ok]: Shutting down master waits for replica then fails (1959 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (14 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (506 ms) [ok]: Test replication with blocking lists and sorted sets operations (25125 ms) [32/92 done]: integration/block-repl (27 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: hash ziplist uneven record count (430 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (145 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1751 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (16 ms) [ok]: corrupt payload: hash duplicate records (363 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (6 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (1094 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (26 ms) [ok]: Shutting down master waits for replica then aborted (1128 ms) [33/92 done]: integration/shutdown (14 seconds) Testing integration/psync2-master-restart [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (8300 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (574 ms) [ok]: corrupt payload: hash empty zipmap (576 ms) [ok]: XADD can CREATE an empty stream (9 ms) [ok]: XSETID can set a specific ID (7 ms) [ok]: XSETID cannot SETID with smaller ID (20 ms) [ok]: XSETID cannot SETID on non-existent key (5 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (20 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (3 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (14 ms) [ok]: PSYNC2 #3899 regression: setup (1047 ms) [ok]: XSETID cannot set the offset to less than the length (19 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (38 ms) [ok]: AOF enable/disable auto gc (339 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (350 ms) [ok]: Generate timestamp annotations in AOF (685 ms) [ok]: AOF can produce consecutive sequence number after reload (220 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (19 ms) [ok]: Successfully load AOF which has timestamp annotations inside (67 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (300 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (25 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (69 ms) [ok]: Maximum XDEL ID behaves correctly (43 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (4567 ms) [ok]: XADD with artial ID with maximal seq (21 ms) [ok]: PSYNC2 pingoff: setup (1130 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (512 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (5 ms) [ok]: PSYNC2 pingoff: write and wait replication (46 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (390 ms) [ok]: Slave should be able to synchronize with the master (237 ms) [ok]: Empty stream can be rewrite into AOF correctly (103 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (372 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (240 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (3 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (20 ms) [ok]: AOF will trigger limit when AOFRW fails many times (840 ms) [ok]: Truncate AOF to specific timestamp (936 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (437 ms) [ok]: XGROUP HELP should not have unexpected options (7 ms) [ok]: XINFO HELP should not have unexpected options (10 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1326 ms) [34/92 done]: unit/type/stream (40 seconds) Testing integration/failover [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1354 ms) [35/92 done]: integration/replication-buffer (19 seconds) Testing integration/redis-cli [ok]: corrupt payload: fuzzer findings - hash crash (440 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (8 ms) [ok]: Interactive CLI: INFO response should be printed raw (80 ms) [ok]: Interactive CLI: Status reply (73 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (470 ms) [ok]: Interactive CLI: Integer reply (80 ms) [ok]: Interactive CLI: Bulk reply (80 ms) [ok]: Interactive CLI: Multi-bulk reply (89 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (10086 ms) [ok]: failover command fails without connected replica (7 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (473 ms) [ok]: setup replication for following tests (279 ms) [ok]: failover command fails with invalid host (3 ms) [ok]: failover command fails with invalid port (3 ms) [ok]: failover command fails with just force and timeout (5 ms) [ok]: failover command fails when sent to a replica (5 ms) [ok]: failover command fails with force without timeout (3 ms) [ok]: Interactive CLI: Parsing quotes (560 ms) [ok]: PSYNC2: cluster is consistent after failover (33 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (523 ms) [ok]: Detect write load to master (3025 ms) [ok]: failover command to specific replica works (560 ms) [ok]: corrupt payload: fuzzer findings - empty intset (550 ms) [ok]: Interactive CLI: Subscribed mode (747 ms) [ok]: failover command to any replica works (515 ms) [ok]: ziplist implementation: value encoding and backlink (12192 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (435 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (3081 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (546 ms) [ok]: Non-interactive TTY CLI: Status reply (36 ms) [ok]: Non-interactive TTY CLI: Integer reply (21 ms) [ok]: Non-interactive TTY CLI: Bulk reply (26 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (33 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (58 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (319 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (43 ms) [ok]: EVAL can process writes from AOF in read-only replicas (258 ms) [ok]: Test redis-check-aof for old style resp AOF (10 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (21 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (17 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (9 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (23 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (9 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (40 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (15 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (183 ms) [ok]: Non-interactive non-TTY CLI: Status reply (26 ms) [ok]: failover to a replica with force works (691 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (26 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (16 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (20 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (316 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (103 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (23 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (45 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (27 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (213 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (210 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (73 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (59 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (24 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (11 ms) [36/92 done]: integration/aof (17 seconds) Testing integration/redis-benchmark [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (39 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (321 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5057 ms) [ok]: failover with timeout aborts if replica never catches up (793 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (328 ms) [ok]: benchmark: set,get (73 ms) [ok]: failovers can be aborted (238 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (4274 ms) [ok]: benchmark: connecting using URI set,get (47 ms) [ok]: benchmark: connecting using URI with authentication set,get (57 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (341 ms) [ok]: failover aborts if target rejects sync request (330 ms) [37/92 done]: integration/aof-multi-part (17 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - stream integrity check issue (336 ms) [ok]: Test RDB load info (9738 ms) [ok]: Make the old master a replica of the new one and check conditions (1063 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (217 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (209 ms) [ok]: benchmark: full test suite (1210 ms) [ok]: PSYNC2 #3899 regression: kill first replica (12 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (435 ms) [ok]: PSYNC2 #3899 regression: kill first replica (10 ms) [38/92 done]: integration/failover (6 seconds) Testing unit/pubsub [ok]: corrupt payload: fuzzer findings - negative reply length (298 ms) [ok]: Pub/Sub PING on RESP2 (16 ms) [ok]: Pub/Sub PING on RESP3 (23 ms) [ok]: PUBLISH/SUBSCRIBE basics (43 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (20 ms) [ok]: benchmark: multi-thread set,get (593 ms) [ok]: PSYNC2 #3899 regression: kill first replica (3 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (23 ms) [ok]: SUBSCRIBE to one channel more than once (10 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (9 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (203 ms) [ok]: PUBLISH/PSUBSCRIBE basics (23 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (17 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (18 ms) [ok]: PubSub messages with CLIENT REPLY OFF (108 ms) [ok]: benchmark: pipelined full set,get (216 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (9 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (4 ms) [ok]: NUMPATs returns the number of unique patterns (29 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (219 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (11 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (19 ms) [ok]: Keyspace notifications: we receive keyspace notifications (57 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: benchmark: arbitrary command (183 ms) [ok]: PSYNC2: cluster is consistent after load (x = 49966) (15 ms) [ok]: Keyspace notifications: we receive keyevent notifications (57 ms) [ok]: Keyspace notifications: we can receive both kind of events (9 ms) [ok]: Keyspace notifications: we are able to mask events (13 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (20 ms) [ok]: benchmark: keyspace length (60 ms) [ok]: Keyspace notifications: general events test (25 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (25 ms) [ok]: Keyspace notifications: list events test (25 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (10 ms) [ok]: Keyspace notifications: set events test (40 ms) [ok]: Keyspace notifications: zset events test (27 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (314 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (5 ms) [ok]: Keyspace notifications: hash events test (33 ms) [ok]: Keyspace notifications: stream events test (60 ms) [39/92 done]: integration/redis-benchmark (4 seconds) Testing unit/pubsubshard [ok]: corrupt payload: fuzzer findings - stream with no records (217 ms) [ok]: Keyspace notifications: expired events (triggered expire) (137 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (39 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (17 ms) [ok]: Keyspace notifications: expired events (background expire) (220 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (26 ms) [ok]: SSUBSCRIBE to one channel more than once (7 ms) [ok]: dismiss all data types memory (2341 ms) [ok]: Keyspace notifications: evicted events (35 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (19 ms) [ok]: PUBSUB command basics (3 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (34 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (27 ms) [ok]: Keyspace notifications: new key test (23 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (46 ms) [ok]: publish to self inside multi (35 ms) [ok]: publish to self inside script (8 ms) [ok]: unsubscribe inside multi, and publish to self (33 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (409 ms) [ok]: PubSubShard with CLIENT REPLY OFF (107 ms) [ok]: Dumping an RDB - functions only: no (3798 ms) [40/92 done]: unit/pubsub (1 seconds) Testing unit/slowlog [ok]: PSYNC2: Set #1 to replicate from #0 (3 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (441 ms) [ok]: SLOWLOG - check that it starts with an empty log (7 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1224 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - huge string (202 ms) [ok]: setup replication for following tests (120 ms) [ok]: publish message to master and receive on replica (16 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (240 ms) [ok]: PSYNC2 #3899 regression: kill first replica (9 ms) [ok]: Test child sending info (3124 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (392 ms) [ok]: SLOWLOG - max entries is correctly handled (573 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (27 ms) [ok]: SLOWLOG - RESET subcommand works (12 ms) [ok]: script won't load anymore if it's in rdb (7 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (343 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (4 ms) [ok]: Dumping an RDB - functions only: yes (1287 ms) [41/92 done]: unit/pubsubshard (2 seconds) Testing unit/scripting [ok]: SLOWLOG - logged entry sanity check (220 ms) [ok]: AOF rewrite during write load: RDB preamble=no (30366 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (57 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (33 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (4 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (144 ms) [ok]: EVAL - Return _G (5 ms) [ok]: EVAL - Return table with a metatable that raise error (6 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (16 ms) [ok]: EVAL - Return table with a metatable that call redis (13 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (3 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (4 ms) [ok]: SLOWLOG - too long arguments are trimmed (26 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (430 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (8 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (7 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (4 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (4 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (6 ms) [ok]: EVAL - is Lua able to call Redis API? (7 ms) [ok]: EVAL - Redis integer -> Lua type conversion (7 ms) [ok]: EVAL - Lua number -> Redis integer conversion (6 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (10 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (16 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (5 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (6 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (9 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (18 ms) [ok]: PSYNC2 #3899 regression: kill first replica (5 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (18 ms) [ok]: EVAL - Scripts do not block on blpop command (14 ms) [ok]: EVAL - Scripts do not block on brpop command (5 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (11 ms) [ok]: EVAL - Scripts do not block on blmove command (12 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (13 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (16 ms) [ok]: EVAL - Scripts do not block on wait (3 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (245 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (250 ms) [ok]: Turning off AOF kills the background writing child if any (172 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (31 ms) [ok]: EVAL - Scripts can run non-deterministic commands (4 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (8 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (3 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (10 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (10 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (5 ms) [ok]: EVAL - JSON string decoding (6 ms) [ok]: EVAL - JSON smoke test (7 ms) [ok]: EVAL - cmsgpack can pack double? (6 ms) [ok]: EVAL - cmsgpack can pack negative int64? (10 ms) [ok]: failed bgsave prevents writes (456 ms) [ok]: AOF rewrite of list with listpack encoding, string data (132 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (205 ms) [ok]: Scan mode (849 ms) [ok]: SLOWLOG - can clean older entries (233 ms) [42/92 done]: integration/rdb (21 seconds) Testing unit/functions [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (455 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (3 ms) [ok]: EVAL - Numerical sanity check from bitop (13 ms) [ok]: EVAL - Verify minimal bitop functionality (7 ms) [ok]: FUNCTION - Basic usage (16 ms) [ok]: FUNCTION - Load with unknown argument (3 ms) [ok]: EVAL - Able to parse trailing comments (10 ms) [ok]: FUNCTION - Create an already exiting library raise error (4 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (3 ms) [ok]: EVAL_RO - Successful case (20 ms) [ok]: FUNCTION - Create library with unexisting engine (3 ms) [ok]: FUNCTION - Test uncompiled script (2 ms) [ok]: EVAL_RO - Cannot run write commands (7 ms) [ok]: FUNCTION - test replace argument (13 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: redis.sha1hex() implementation (23 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (10 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: FUNCTION - test function delete (13 ms) [ok]: Globals protection setting an undeclared global* (19 ms) [ok]: FUNCTION - test fcall bad arguments (7 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (2 ms) [ok]: lua bit.tohex bug (16 ms) [ok]: FUNCTION - test fcall negative number of keys (5 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (469 ms) [ok]: FUNCTION - test delete on not exiting library (7 ms) [ok]: FUNCTION - test function kill when function is not running (9 ms) [ok]: FUNCTION - test wrong subcommand (7 ms) [ok]: SLOWLOG - can be disabled (480 ms) [ok]: Test an example script DECR_IF_GT (51 ms) [ok]: SLOWLOG - count must be >= -1 (17 ms) [ok]: FUNCTION - test loading from rdb (43 ms) [ok]: SLOWLOG - get all slow logs (73 ms) [ok]: FUNCTION - test debug reload different options (70 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (63 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (50 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (27 ms) [43/92 done]: unit/slowlog (3 seconds) Testing unit/maxmemory [ok]: FUNCTION - test function dump and restore (50 ms) [ok]: FUNCTION - test function dump and restore with flush argument (27 ms) [ok]: FUNCTION - test function dump and restore with append argument (60 ms) [ok]: corrupt payload: fuzzer findings - empty zset (433 ms) [ok]: FUNCTION - test function dump and restore with replace argument (63 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (23 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (7 ms) [ok]: FUNCTION - test fcall_ro with write command (16 ms) [ok]: FUNCTION - test fcall_ro with read only commands (9 ms) [ok]: FUNCTION - test keys and argv (16 ms) [ok]: FUNCTION - test command get keys on fcall (7 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (4358 ms) [ok]: FUNCTION - test command get keys on fcall_ro (7 ms) [ok]: PSYNC2: cluster is consistent after failover (25 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10003 ms) [44/92 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/introspection [ok]: dismiss client output buffer (3780 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (533 ms) [ok]: Replication: commands with many arguments (issue #1221) (24596 ms) [ok]: FUNCTION - test function kill (466 ms) [ok]: dismiss client query buffer (220 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (596 ms) [ok]: spopwithcount rewrite srem command (159 ms) [ok]: PING (23 ms) [ok]: CLIENT LIST (13 ms) [ok]: CLIENT LIST with IDs (16 ms) [ok]: CLIENT INFO (7 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (309 ms) [ok]: EVAL does not leak in the Lua stack (1243 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (11 ms) [ok]: Number conversion precision test (issue #1118) (6 ms) [ok]: CLIENT KILL with illegal arguments (56 ms) [ok]: String containing number precision test (regression of issue #1118) (13 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (13 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (7 ms) [ok]: Scripts can handle commands with incorrect arity (23 ms) [ok]: Correct handling of reused argv (issue #1939) (10 ms) [ok]: Functions in the Redis namespace are able to report errors (10 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9461 ms) [ok]: CLUSTER RESET can not be invoke from within a script (9 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (113 ms) [ok]: Script with RESP3 map (44 ms) [ok]: FUNCTION - test script kill not working on function (443 ms) [ok]: CLIENT KILL close the client connection during bgsave (180 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Script return recursive object (210 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (76 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (434 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (60 ms) [ok]: Script check unpack with massive arguments (73 ms) [ok]: Connecting as a replica (2234 ms) [ok]: Script read key with expiration set (10 ms) [ok]: Script del key with expiration set (17 ms) [ok]: Script ACL check (36 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (71 ms) [ok]: Binary code loading failed (10 ms) [ok]: Try trick global protection 1 (7 ms) [ok]: Try trick global protection 2 (10 ms) [ok]: Try trick global protection 3 (7 ms) [ok]: MONITOR can log executed commands (39 ms) [ok]: Try trick global protection 4 (7 ms) [ok]: Try trick readonly table on redis table (9 ms) [ok]: Try trick readonly table on json table (9 ms) [ok]: MONITOR can log commands issued by the scripting engine (26 ms) [ok]: Try trick readonly table on cmsgpack table (9 ms) [ok]: Try trick readonly table on bit table (9 ms) [ok]: Test loadfile are not available (9 ms) [ok]: MONITOR can log commands issued by functions (43 ms) [ok]: Test dofile are not available (10 ms) [ok]: Test print are not available (13 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (266 ms) [ok]: FUNCTION - test function kill not working on eval (444 ms) [ok]: MONITOR supports redacting command arguments (77 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (946 ms) [ok]: FUNCTION - test function flush (70 ms) [ok]: MONITOR correctly handles multi-exec cases (63 ms) [ok]: FUNCTION - test function wrong argument (10 ms) [ok]: MONITOR log blocked command only once (61 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (6 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (10 ms) [ok]: CLIENT SETNAME does not accept spaces (4 ms) [ok]: CLIENT SETNAME can assign a name to this connection (9 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (13 ms) [ok]: After CLIENT SETNAME, connection can still be closed (26 ms) [ok]: CLIENT SETINFO can set a library name to this connection (13 ms) [ok]: CLIENT SETINFO invalid args (27 ms) [ok]: RESET does NOT clean library name (13 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (319 ms) [ok]: CLIENT SETINFO can clear library name (10 ms) [ok]: Slave should be able to synchronize with the master (136 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (277 ms) [ok]: dismiss replication backlog (1491 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (1424 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (433 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (3212 ms) [45/92 done]: integration/dismiss-mem (9 seconds) Testing unit/introspection-2 [ok]: PSYNC2 #3899 regression: kill first replica (5 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (173 ms) [ok]: AOF rewrite of list with listpack encoding, int data (157 ms) [ok]: Connect a replica to the master instance (127 ms) [ok]: FUNCTION - creation is replicated to replica (7 ms) [ok]: FUNCTION - call on replica (6 ms) [ok]: FUNCTION - restore is replicated to replica (32 ms) [ok]: FUNCTION - delete is replicated to replica (13 ms) [ok]: FUNCTION - flush is replicated to replica (17 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (443 ms) [ok]: Timedout script does not cause a false dead client (183 ms) [ok]: The microsecond part of the TIME command will not overflow (3 ms) [ok]: Disconnecting the replica from master instance (133 ms) [ok]: FUNCTION - test replication to replica on rdb phase (2 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (3 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (7 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (321 ms) [ok]: FUNCTION - function effect is replicated to replica (17 ms) [ok]: FUNCTION - modify key space of read only replica (6 ms) [ok]: AOF rewrite of set with intset encoding, string data (113 ms) [ok]: Timedout script link is still usable after Lua returns (343 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (350 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (1358 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (234 ms) [ok]: First server should have role slave after SLAVEOF (140 ms) [ok]: AOF rewrite of set with intset encoding, int data (164 ms) [ok]: Data divergence can happen under default conditions (56 ms) [ok]: CONFIG save params special case handled properly (1410 ms) [ok]: Data divergence is allowed on writable replicas (49 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (486 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (220 ms) [ok]: Timedout scripts and unblocked command (552 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (587 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (142 ms) [46/92 done]: integration/replication-4 (39 seconds) Testing unit/limits [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (460 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (236 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (14 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (220 ms) [ok]: LIBRARIES - test shared function can access default globals (10 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (480 ms) [ok]: LIBRARIES - usage and code sharing (20 ms) [ok]: LIBRARIES - test registration failure revert the entire load (6 ms) [ok]: LIBRARIES - test registration function name collision (7 ms) [ok]: LIBRARIES - test registration function name collision on same library (3 ms) [ok]: Detect write load to master (2013 ms) [ok]: LIBRARIES - test registration with no argument (6 ms) [ok]: LIBRARIES - test registration with only name (6 ms) [ok]: PSYNC2 #3899 regression: kill first replica (46 ms) [ok]: LIBRARIES - test registration with to many arguments (2 ms) [ok]: LIBRARIES - test registration with no string name (1 ms) [ok]: LIBRARIES - test registration with wrong name format (3 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (144 ms) [ok]: LIBRARIES - test registration with empty name (6 ms) [ok]: LIBRARIES - math.random from function load (1 ms) [ok]: LIBRARIES - redis.call from function load (3 ms) [ok]: LIBRARIES - redis.setresp from function load (4 ms) [ok]: LIBRARIES - redis.set_repl from function load (4 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (1 ms) [ok]: LIBRARIES - malicious access test (12 ms) [ok]: LIBRARIES - delete removed all functions on library (4 ms) [ok]: CONFIG sanity (730 ms) [ok]: LIBRARIES - register function inside a function (6 ms) [ok]: LIBRARIES - register library with no functions (9 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (265 ms) [ok]: Before the replica connects we issue two EVAL commands (20 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (7 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (445 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (118 ms) [ok]: Connect a replica to the master instance (133 ms) [ok]: Replication of script multiple pushes to list with BLPOP (33 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (879 ms) [ok]: Lua scripts using SELECT are replicated correctly (30 ms) [ok]: Piping raw protocol (3181 ms) [ok]: LIBRARIES - load timeout (505 ms) [ok]: Options -X with illegal argument (46 ms) [ok]: LIBRARIES - verify global protection on the load run (3 ms) [ok]: LIBRARIES - named arguments (4 ms) [ok]: LIBRARIES - named arguments, bad function name (2 ms) [ok]: LIBRARIES - named arguments, bad callback type (8 ms) [ok]: LIBRARIES - named arguments, bad description (4 ms) [ok]: LIBRARIES - named arguments, unknown argument (4 ms) [ok]: PSYNC2 #3899 regression: kill first replica (10 ms) [ok]: LIBRARIES - named arguments, missing function name (4 ms) [ok]: LIBRARIES - named arguments, missing callback (4 ms) [ok]: FUNCTION - test function restore with function name collision (69 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (3110 ms) [ok]: FUNCTION - test function list with code (21 ms) [ok]: FUNCTION - test function list with pattern (7 ms) [ok]: DUMP RESTORE with -x option (134 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (1 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (6 ms) [ok]: FUNCTION - verify OOM on function load and function restore (18 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (375 ms) [ok]: FUNCTION - verify allow-omm allows running any command (14 ms) [ok]: DUMP RESTORE with -X option (119 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (498 ms) [47/92 done]: integration/corrupt-dump (27 seconds) Testing unit/obuf-limits [ok]: Check if maxclients works refusing connections (1110 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (191 ms) [48/92 done]: integration/redis-cli (15 seconds) Testing unit/bitops [49/92 done]: unit/limits (1 seconds) Testing unit/bitfield [ok]: AOF rewrite of zset with skiplist encoding, int data (280 ms) [ok]: CONFIG SET client-output-buffer-limit (53 ms) [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (2 ms) [ok]: FUNCTION - unknown flag (8 ms) [ok]: FUNCTION - write script on fcall_ro (1 ms) [ok]: FUNCTION - write script with no-writes flag (11 ms) [ok]: CONFIG REWRITE sanity (1287 ms) [ok]: BITCOUNT returns 0 against non existing key (8 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: FUNCTION - deny oom (27 ms) [ok]: PSYNC2: cluster is consistent after load (x = 51401) (12 ms) [ok]: BITCOUNT returns 0 with out of range indexes (19 ms) [ok]: BITFIELD signed SET and GET basics (30 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (14 ms) [ok]: FUNCTION - deny oom on no-writes function (24 ms) [ok]: AOF rewrite functions (119 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (14 ms) [ok]: BITCOUNT against test vector #1 (20 ms) [ok]: BITFIELD unsigned SET and GET basics (23 ms) [ok]: BITFIELD signed SET and GET together (7 ms) [ok]: BITCOUNT against test vector #2 (7 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (10 ms) [ok]: BITFIELD with only key as argument (7 ms) [ok]: BITCOUNT against test vector #3 (19 ms) [ok]: FUNCTION - allow stale (56 ms) [ok]: FUNCTION - redis version api (18 ms) [ok]: BITCOUNT against test vector #4 (15 ms) [ok]: BITFIELD # form (20 ms) [ok]: BITCOUNT against test vector #5 (7 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: BITFIELD basic INCRBY form (16 ms) [ok]: FUNCTION - function stats (19 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (8083 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (10 ms) [ok]: BITFIELD chaining of multiple commands (9 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (29 ms) [ok]: FUNCTION - function stats delete library (3 ms) [ok]: FUNCTION - test function stats on loading failure (8 ms) [ok]: FUNCTION - function stats cleaned after flush (6 ms) [ok]: BITFIELD unsigned overflow wrap (23 ms) [ok]: FUNCTION - function test empty engine (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: FUNCTION - function test unknown metadata value (2 ms) [ok]: FUNCTION - function test no name (2 ms) [ok]: FUNCTION - function test multiple names (2 ms) [ok]: BITFIELD unsigned overflow sat (17 ms) [ok]: FUNCTION - function test name with quotes (3 ms) [ok]: FUNCTION - trick global protection 1 (16 ms) [ok]: BITFIELD signed overflow wrap (19 ms) [ok]: FUNCTION - test getmetatable on script load (1 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (1045 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (5 ms) [ok]: BITFIELD signed overflow sat (26 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (228 ms) [ok]: BGREWRITEAOF is refused if already in progress (41 ms) [50/92 done]: unit/functions (7 seconds) Testing unit/geo [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3032 ms) [ok]: Connect a replica to the master instance (153 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (6 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (7 ms) [ok]: Redis.set_repl() don't accept invalid values (9 ms) [51/92 done]: unit/aofrw (53 seconds) Testing unit/memefficiency [52/92 done]: integration/psync2-pingoff (19 seconds) Testing unit/hyperloglog [ok]: Test selective replication of certain Redis commands from Lua (33 ms) [ok]: PRNG is seeded randomly for command replication (16 ms) [ok]: Using side effects is not a problem with command replication (32 ms) [ok]: Without maxmemory small integers are shared (8 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (2 ms) [ok]: With maxmemory and LRU policy integers are not shared (14 ms) [ok]: GEO with wrong type src key (55 ms) [ok]: GEO with non existing src key (13 ms) [ok]: GEO BYLONLAT with empty search (18 ms) [ok]: GEO BYMEMBER with non existing member (18 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (1 ms) [ok]: GEOADD update with CH option (7 ms) [ok]: GEOADD update with NX option (12 ms) [ok]: GEOADD update with XX option (9 ms) [ok]: GEOADD update with CH NX option (5 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (5 ms) [ok]: GEOADD update with invalid option (1 ms) [ok]: GEOADD invalid coordinates (1 ms) [ok]: GEOADD multi add (1 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (3 ms) [ok]: GEORADIUS_RO simple (sorted) (3 ms) [ok]: GEOSEARCH simple (sorted) (3 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (7 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (1 ms) [ok]: GEOSEARCH with STOREDIST option (8 ms) [ok]: GEORADIUS withdist (sorted) (2 ms) [ok]: GEOSEARCH withdist (sorted) (3 ms) [ok]: GEORADIUS with COUNT (2 ms) [ok]: GEORADIUS with multiple WITH* tokens (13 ms) [ok]: GEORADIUS with ANY not sorted by default (1 ms) [ok]: GEORADIUS with ANY sorted by ASC (1 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (3 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (3 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (5 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (18 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (7 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (7 ms) [ok]: Memory efficiency with values in range 32 (391 ms) [ok]: GEOSEARCH vs GEORADIUS (15 ms) [ok]: GEOSEARCH non square, long and narrow (26 ms) [ok]: GEOSEARCH corner point test (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (4 ms) [ok]: GEOHASH is able to return geohash strings (1 ms) [ok]: GEOHASH with only key as argument (11 ms) [ok]: GEOPOS simple (7 ms) [ok]: GEOPOS missing element (8 ms) [ok]: GEOPOS with only key as argument (12 ms) [ok]: GEODIST simple & unit (11 ms) [ok]: GEODIST missing elements (16 ms) [ok]: GEORADIUS STORE option: syntax error (4 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (10 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (6 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (16 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (3 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (1 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (18 ms) [ok]: GEOSEARCH the box spans -180° or 180° (7 ms) [ok]: GEOSEARCH with small distance (7 ms) [ok]: BITCOUNT fuzzing without start/end (1186 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (1313 ms) [ok]: CONFIG SET with multiple args (27 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (673 ms) [ok]: CONFIG SET rollback on set error (33 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (27146 ms) [ok]: CONFIG SET rollback on apply error (54 ms) [ok]: CONFIG SET duplicate configs (3 ms) [ok]: CONFIG SET set immutable (3 ms) [ok]: CONFIG GET hidden configs (10 ms) [ok]: CONFIG GET multiple args (4 ms) [ok]: HyperLogLog self test passes (640 ms) [ok]: PFADD without arguments creates an HLL value (9 ms) [ok]: Approximated cardinality after creation is zero (4 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (7 ms) [ok]: PFADD returns 0 when no reg was modified (7 ms) [ok]: PFADD works with empty string (regression) (6 ms) [ok]: PFCOUNT returns approximated cardinality of set (14 ms) [ok]: Memory efficiency with values in range 64 (539 ms) [ok]: test RESP2/2 big number protocol parsing (10 ms) [ok]: test RESP2/2 malformed big number protocol parsing (6 ms) [ok]: test RESP2/2 map protocol parsing (11 ms) [ok]: redis-server command line arguments - error cases (203 ms) [ok]: test RESP2/2 set protocol parsing (13 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: test RESP2/2 double protocol parsing (6 ms) [ok]: test RESP2/2 null protocol parsing (9 ms) [ok]: test RESP2/2 verbatim protocol parsing (11 ms) [ok]: test RESP2/2 true protocol parsing (6 ms) [ok]: test RESP2/2 false protocol parsing (13 ms) [ok]: test RESP2/3 big number protocol parsing (10 ms) [ok]: test RESP2/3 malformed big number protocol parsing (7 ms) [ok]: test RESP2/3 map protocol parsing (10 ms) [ok]: test RESP2/3 set protocol parsing (17 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (7 ms) [ok]: test RESP2/3 double protocol parsing (10 ms) [ok]: test RESP2/3 null protocol parsing (12 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (458 ms) [ok]: test RESP2/3 verbatim protocol parsing (10 ms) [ok]: test RESP2/3 true protocol parsing (6 ms) [ok]: test RESP2/3 false protocol parsing (14 ms) [ok]: test RESP3/2 big number protocol parsing (5 ms) [ok]: test RESP3/2 malformed big number protocol parsing (12 ms) [ok]: test RESP3/2 map protocol parsing (7 ms) [ok]: test RESP3/2 set protocol parsing (6 ms) [ok]: test RESP3/2 double protocol parsing (6 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (16 ms) [ok]: test RESP3/2 true protocol parsing (6 ms) [ok]: test RESP3/2 false protocol parsing (7 ms) [ok]: test RESP3/3 big number protocol parsing (13 ms) [ok]: test RESP3/3 malformed big number protocol parsing (4 ms) [ok]: test RESP3/3 map protocol parsing (13 ms) [ok]: test RESP3/3 set protocol parsing (16 ms) [ok]: test RESP3/3 double protocol parsing (13 ms) [ok]: test RESP3/3 null protocol parsing (13 ms) [ok]: test RESP3/3 verbatim protocol parsing (13 ms) [ok]: test RESP3/3 true protocol parsing (14 ms) [ok]: test RESP3/3 false protocol parsing (6 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (367 ms) [ok]: test resp3 attribute protocol parsing (7 ms) [ok]: Script block the time during execution (26 ms) [ok]: Script delete the expired key (45 ms) [ok]: TIME command using cached time (16 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: Script block the time in some expiration related commands (85 ms) [ok]: Memory efficiency with values in range 128 (697 ms) [ok]: RESTORE expired keys with expiration time (13 ms) [ok]: HyperLogLogs are promote from sparse to dense (722 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (443 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (86 ms) [ok]: PSYNC2 #3899 regression: verify consistency (34 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (433 ms) [ok]: Script - disallow write on OOM (20 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (7 ms) [ok]: EVAL - Return _G (7 ms) [ok]: EVAL - Return table with a metatable that raise error (6 ms) [ok]: EVAL - Return table with a metatable that call redis (13 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (6 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (6 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (4 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (7 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (6 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (4 ms) [ok]: EVAL - is Lua able to call Redis API? (12 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (7 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (6 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (6 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (4 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (6 ms) [ok]: EVAL - Redis integer -> Lua type conversion (10 ms) [ok]: EVAL - Lua number -> Redis integer conversion (6 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (14 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (16 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (7 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (7 ms) [ok]: ziplist implementation: encoding stress testing (15966 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (10 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (23 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (17 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (310 ms) [ok]: EVAL - Scripts do not block on blpop command (19 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (546 ms) [ok]: EVAL - Scripts do not block on brpop command (20 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (20 ms) [53/92 done]: unit/type/list-3 (58 seconds) Testing unit/lazyfree [ok]: EVAL - Scripts do not block on blmove command (17 ms) [ok]: Memory efficiency with values in range 1024 (618 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (13 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (12 ms) [ok]: EVAL - Scripts do not block on wait (5 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (33 ms) [ok]: EVAL - Scripts can run non-deterministic commands (5 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (3 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (6 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (3 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (14 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (3 ms) [ok]: EVAL - JSON string decoding (7 ms) [ok]: EVAL - JSON smoke test (7 ms) [ok]: EVAL - cmsgpack can pack double? (6 ms) [ok]: EVAL - cmsgpack can pack negative int64? (6 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (212 ms) [ok]: BITCOUNT fuzzing with start/end (1796 ms) [ok]: HyperLogLog sparse encoding stress test (826 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (2 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: BITCOUNT with start, end (63 ms) [ok]: BITCOUNT syntax error #1 (10 ms) [ok]: BITCOUNT syntax error #2 (5 ms) [ok]: BITCOUNT regression test for github issue #582 (17 ms) [ok]: BITCOUNT misaligned prefix (13 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (4 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (10 ms) [ok]: BITOP NOT (empty string) (11 ms) [ok]: BITOP NOT (known string) (9 ms) [ok]: BITOP where dest and target are the same key (12 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (34 ms) [ok]: BITOP missing key is considered a stream of zero (40 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (380 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (28 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (7 ms) [ok]: TOUCH alters the last access time of a key (3024 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (560 ms) [ok]: EVAL - Numerical sanity check from bitop (4 ms) [ok]: EVAL - Verify minimal bitop functionality (6 ms) [ok]: EVAL - Able to parse trailing comments (6 ms) [ok]: EVAL_RO - Successful case (10 ms) [ok]: UNLINK can reclaim memory in background (356 ms) [ok]: EVAL_RO - Cannot run write commands (6 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (100 ms) [ok]: BITFIELD overflow detection fuzzing (3346 ms) [54/92 done]: integration/psync2-reg (23 seconds) Testing unit/wait [ok]: SCRIPTING FLUSH ASYNC (282 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (7 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (2 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (3 ms) [ok]: SORT BY output gets ordered for scripting (9 ms) [ok]: SORT BY with GET gets ordered for scripting (6 ms) [ok]: redis.sha1hex() implementation (3 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (454 ms) [ok]: Globals protection setting an undeclared global* (3 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (18 ms) [ok]: BITOP and fuzzing (503 ms) [ok]: random numbers are random now (6 ms) [ok]: Scripting engine PRNG can be seeded correctly (6 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (560 ms) [ok]: Setup slave (117 ms) [ok]: WAIT out of range timeout (milliseconds) (13 ms) [ok]: PSYNC2: cluster is consistent after failover (27 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (30 ms) [ok]: EVAL does not leak in the Lua stack (437 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (175 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1146 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (595 ms) [ok]: TOUCH returns the number of existing keys specified (14 ms) [ok]: redis-server command line arguments - save with empty input (1543 ms) [ok]: BITOP or fuzzing (676 ms) [ok]: command stats for GEOADD (26 ms) [ok]: MGET: mget shouldn't be propagated in Lua (70 ms) [ok]: errors stats for GEOADD (28 ms) [ok]: command stats for EXPIRE (37 ms) [ok]: command stats for BRPOP (29 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: command stats for MULTI (89 ms) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (210 ms) [ok]: command stats for scripts (47 ms) [ok]: COMMAND COUNT get total number of Redis commands (6 ms) [ok]: COMMAND GETKEYS GET (10 ms) [ok]: BITFIELD overflow wrap fuzzing (1234 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (3 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (27 ms) [ok]: COMMAND GETKEYSANDFLAGS invalid args (3 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (12 ms) [ok]: COMMAND GETKEYS XGROUP (7 ms) [ok]: COMMAND GETKEYS EVAL with keys (2 ms) [ok]: COMMAND GETKEYS EVAL without keys (3 ms) [ok]: COMMAND GETKEYS LCS (8 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (6 ms) [ok]: COMMAND LIST syntax error (9 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (5 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (3 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (3 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (36 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (6 ms) [ok]: COMMAND INFO of invalid subcommands (8 ms) [ok]: SET command will not be marked with movablekeys (3 ms) [ok]: GET command will not be marked with movablekeys (3 ms) [ok]: MSET command will not be marked with movablekeys (5 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: LMOVE command will not be marked with movablekeys (4 ms) [ok]: LPOP command will not be marked with movablekeys (5 ms) [ok]: BLPOP command will not be marked with movablekeys (5 ms) [ok]: PING command will not be marked with movablekeys (3 ms) [ok]: MEMORY command will not be marked with movablekeys (5 ms) [ok]: cannot modify protected configuration - no (10 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (4 ms) [ok]: RENAME command will not be marked with movablekeys (5 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (3 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (5 ms) [ok]: XREAD command is marked with movablekeys (8 ms) [ok]: EVAL command is marked with movablekeys (6 ms) [ok]: SORT command is marked with movablekeys (4 ms) [ok]: SORT_RO command is marked with movablekeys (3 ms) [ok]: MIGRATE command is marked with movablekeys (3 ms) [ok]: GEORADIUS command is marked with movablekeys (6 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (692 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (560 ms) [ok]: Memory efficiency with values in range 16384 (2378 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (9 ms) [ok]: Number conversion precision test (issue #1118) (6 ms) [ok]: String containing number precision test (regression of issue #1118) (7 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (7 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1017 ms) [ok]: Scripts can handle commands with incorrect arity (6 ms) [ok]: Correct handling of reused argv (issue #1939) (4 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (6 ms) [ok]: Script with RESP3 map (21 ms) [55/92 done]: unit/introspection-2 (8 seconds) Testing unit/pause [56/92 done]: unit/memefficiency (5 seconds) Testing unit/querybuf [ok]: BITFIELD: setup slave (133 ms) [ok]: cannot modify protected configuration - local (23 ms) [ok]: BITFIELD: write on master, read on slave (36 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (6 ms) [ok]: Script return recursive object (189 ms) [ok]: BITOP xor fuzzing (1012 ms) [ok]: Script check unpack with massive arguments (77 ms) [ok]: Script read key with expiration set (5 ms) [ok]: Test read commands are not blocked by client pause (19 ms) [ok]: Script del key with expiration set (5 ms) [ok]: Script ACL check (34 ms) [ok]: Binary code loading failed (3 ms) [ok]: Try trick global protection 1 (4 ms) [ok]: Try trick global protection 2 (8 ms) [ok]: Try trick global protection 3 (9 ms) [ok]: Try trick global protection 4 (6 ms) [ok]: Try trick readonly table on redis table (12 ms) [ok]: Try trick readonly table on json table (5 ms) [ok]: Try trick readonly table on cmsgpack table (6 ms) [ok]: Try trick readonly table on bit table (3 ms) [ok]: Test loadfile are not available (11 ms) [ok]: Test dofile are not available (9 ms) [ok]: Test print are not available (14 ms) [57/92 done]: unit/bitfield (6 seconds) Testing unit/tls [ok]: BITOP NOT fuzzing (207 ms) [ok]: BITOP with integer encoded source objects (15 ms) [ok]: BITOP with non string source key (20 ms) [ok]: BITOP with empty string after non empty string (issue #529) (13 ms) [ok]: BITPOS bit=0 with empty key returns 0 (13 ms) [ok]: BITPOS bit=1 with empty key returns -1 (13 ms) [ok]: BITPOS bit=0 with string less than 1 word works (13 ms) [ok]: BITPOS bit=1 with string less than 1 word works (17 ms) [ok]: BITPOS bit=0 starting at unaligned address (13 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (292 ms) [ok]: BITPOS bit=1 starting at unaligned address (17 ms) [58/92 done]: unit/tls (1 seconds) Testing unit/tracking [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (743 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (87 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (140 ms) [ok]: Test write commands are paused by RO (26 ms) [ok]: Test special commands are paused by RO (33 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (90 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (46 ms) [ok]: Test write multi-execs are blocked by pause RO (21 ms) [ok]: Test scripts are blocked by pause RO (29 ms) [ok]: Clients are able to enable tracking and redirect it (4 ms) [ok]: The other connection is able to get invalidations (23 ms) [ok]: Test RO scripts are not blocked by pause RO (130 ms) [ok]: The client is now able to disable tracking (6 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (4 ms) [ok]: The connection gets invalidation messages about all the keys (1 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (300 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (61 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1122 ms) [ok]: Clients can enable the BCAST mode with prefixes (39 ms) [ok]: Adding prefixes to BCAST mode works (10 ms) [ok]: BITPOS bit=0 works with intervals (36 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (44 ms) [ok]: Tracking NOLOOP mode in standard mode works (23 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (437 ms) [ok]: BITPOS bit=1 works with intervals (47 ms) [ok]: Test may-replicate commands are rejected in RO scripts (14 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (16 ms) [ok]: BITPOS bit=0 changes behavior if end is given (22 ms) [ok]: Test multiple clients can be queued up and unblocked (34 ms) [ok]: Test clients with syntax errors will get responses immediately (10 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (94 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (181 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (718 ms) [ok]: Test both active and passive expires are skipped during client pause (166 ms) [ok]: Test that client pause starts at the end of a transaction (47 ms) [ok]: Timedout script does not cause a false dead client (158 ms) [ok]: Timedout script link is still usable after Lua returns (239 ms) [ok]: Test when replica paused, offset would not grow (43 ms) [ok]: Test replica offset would grow after unpause (18 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (687 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (51 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1126 ms) [ok]: Tracking gets notification of expired keys (1023 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (74 ms) [59/92 done]: unit/pause (2 seconds) Testing unit/oom-score-adj [ok]: Tracking gets notification of lazy expired keys (147 ms) [ok]: HELLO 3 reply is correct (7 ms) [ok]: HELLO without protover (30 ms) [ok]: RESP3 based basic invalidation (30 ms) [ok]: RESP3 tracking redirection (27 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (23 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (20 ms) [ok]: Timedout scripts and unblocked command (789 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (43 ms) [ok]: CONFIG SET oom-score-adj works as expected (71 ms) [ok]: lazy free a stream with all types of metadata (4113 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (63 ms) [ok]: query buffer resized correctly (2446 ms) [ok]: lazy free a stream with deleted cgroup (14 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (63 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (9 ms) [ok]: CONFIG SET oom score restored on disable (4 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (44 ms) [ok]: CONFIG SET oom score relative and absolute (14 ms) [ok]: query buffer resized correctly when not idle (76 ms) [ok]: CONFIG SET out-of-range oom score (20 ms) [ok]: Different clients can redirect to the same connection (33 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (693 ms) [ok]: Different clients using different protocols can track the same key (43 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (218 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9448 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (60 ms) [60/92 done]: unit/lazyfree (6 seconds) Testing unit/shutdown [ok]: No invalidation message when using OPTIN option (70 ms) [61/92 done]: unit/oom-score-adj (1 seconds) Testing unit/networking [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (30 ms) [ok]: WAITAOF local copy before fsync (74 ms) Waiting for process 40095 to exit... [ok]: Invalidation message sent when using OPTOUT option (27 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (40 ms) [ok]: Able to redirect to a RESP3 client (50 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (57 ms) [ok]: BCAST with prefix collisions throw errors (33 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (533 ms) [ok]: hdel deliver invalidate message after response in the same connection (37 ms) [ok]: CONFIG SET port number (553 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (212 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (177 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (47 ms) [ok]: Before the replica connects we issue two EVAL commands (7 ms) [ok]: Tracking invalidation message of eviction keys should be before response (89 ms) [ok]: Unblocked BLMOVE gets notification after response (43 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (490 ms) [ok]: Connect a replica to the master instance (123 ms) [ok]: Now use EVALSHA against the master, with both SHAs (13 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (5 ms) [ok]: Replication of script multiple pushes to list with BLPOP (17 ms) [ok]: WAITAOF local copy everysec (917 ms) [ok]: EVALSHA replication when first call is readonly (27 ms) [ok]: Tracking gets notification on tracking table key eviction (97 ms) [ok]: PSYNC2: generate load while killing replication links (5002 ms) [ok]: Lua scripts using SELECT are replicated correctly (20 ms) [ok]: WAITAOF local copy with appendfsync always (27 ms) [ok]: PSYNC2: cluster is consistent after load (x = 52462) (23 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (61 ms) [ok]: WAITAOF local wait and then stop aof (32 ms) [ok]: CONFIG SET bind address (505 ms) [ok]: WAITAOF local on server with aof disabled (10 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (21 ms) [ok]: Invalidation message received for flushall (74 ms) [ok]: config during loading (3730 ms) [ok]: Slave should be able to synchronize with the master (126 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: Detect write load to master (7 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (11 ms) [ok]: Invalidation message received for flushdb (85 ms) [ok]: Temp rdb will be deleted in signal handle (139 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (73 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (7 ms) [ok]: Test ASYNC flushall (76 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (13 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (56 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (500 ms) [ok]: RDB save will be failed in shutdown (82 ms) [ok]: WAITAOF local if AOFRW was postponed (466 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (65 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (32 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (27 ms) [ok]: Clean up rdb same named folder (15 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (70 ms) [ok]: CONFIG REWRITE handles rename-command properly (745 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (531 ms) [ok]: CONFIG SET bind-source-addr (943 ms) [ok]: WAITAOF replica copy before fsync (116 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (111 ms) [ok]: Connect a replica to the master instance (120 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (4 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (3 ms) [ok]: Test selective replication of certain Redis commands from Lua (33 ms) [ok]: PRNG is seeded randomly for command replication (10 ms) [ok]: Using side effects is not a problem with command replication (9 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (7 ms) [ok]: Slave should be able to synchronize with the master (240 ms) [62/92 done]: unit/shutdown (2 seconds) Testing unit/client-eviction [ok]: Default bind address configuration handling (379 ms) [ok]: Protected mode works as expected (15 ms) [ok]: client evicted due to large argv (106 ms) [ok]: query buffer resized correctly with fat argv (2924 ms) [63/92 done]: unit/networking (3 seconds) Testing unit/violations [ok]: client evicted due to large query buf (80 ms) [64/92 done]: unit/querybuf (6 seconds) Testing unit/replybufsize [ok]: client evicted due to percentage of maxmemory (50 ms) [ok]: SORT adds integer field to list (1 ms) [65/92 done]: unit/violations (0 seconds) Testing unit/cluster/announced-endpoints [ok]: client evicted due to large multi buf (136 ms) [ok]: CONFIG REWRITE handles alias config properly (1276 ms) [66/92 done]: unit/introspection (16 seconds) Testing unit/cluster/misc [ok]: PSYNC2: Set #3 to replicate from #2 (4 ms) [ok]: Test scripting debug protocol parsing (14 ms) [ok]: Test scripting debug lua stack overflow (6 ms) [ok]: verify reply buffer limits (756 ms) [ok]: test RESP2/2 big number protocol parsing (4 ms) [ok]: test RESP2/2 malformed big number protocol parsing (7 ms) [ok]: test RESP2/2 map protocol parsing (3 ms) [ok]: test RESP2/2 set protocol parsing (6 ms) [ok]: test RESP2/2 double protocol parsing (4 ms) [ok]: test RESP2/2 null protocol parsing (3 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (5340 ms) [ok]: test RESP2/2 verbatim protocol parsing (6 ms) [ok]: test RESP2/2 true protocol parsing (7 ms) [ok]: test RESP2/2 false protocol parsing (6 ms) [ok]: test RESP2/3 big number protocol parsing (4 ms) [ok]: test RESP2/3 malformed big number protocol parsing (3 ms) [ok]: test RESP2/3 map protocol parsing (4 ms) [ok]: test RESP2/3 set protocol parsing (4 ms) [ok]: test RESP2/3 double protocol parsing (5 ms) [ok]: WAITAOF replica copy everysec (1713 ms) [ok]: test RESP2/3 null protocol parsing (4 ms) [ok]: test RESP2/3 verbatim protocol parsing (3 ms) [ok]: test RESP2/3 true protocol parsing (6 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (3 ms) [ok]: test RESP3/2 malformed big number protocol parsing (4 ms) [ok]: test RESP3/2 map protocol parsing (8 ms) [ok]: test RESP3/2 set protocol parsing (6 ms) [ok]: test RESP3/2 double protocol parsing (3 ms) [ok]: test RESP3/2 null protocol parsing (4 ms) [ok]: test RESP3/2 verbatim protocol parsing (5 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (6 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (2513 ms) [ok]: test RESP3/3 big number protocol parsing (5 ms) [ok]: test RESP3/3 malformed big number protocol parsing (4 ms) [67/92 done]: unit/replybufsize (1 seconds) Testing unit/cluster/cli [ok]: test RESP3/3 map protocol parsing (4 ms) [ok]: test RESP3/3 set protocol parsing (7 ms) [ok]: Tracking info is correct (54 ms) [ok]: test RESP3/3 double protocol parsing (2 ms) [ok]: test RESP3/3 null protocol parsing (3 ms) [ok]: CLIENT GETREDIR provides correct client id (11 ms) [ok]: test RESP3/3 verbatim protocol parsing (5 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (7 ms) [ok]: test RESP3/3 true protocol parsing (5 ms) [ok]: test RESP3/3 false protocol parsing (4 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (3 ms) [ok]: test resp3 attribute protocol parsing (7 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (9 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (14 ms) [ok]: Script block the time during execution (26 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (15 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (21 ms) [ok]: Script delete the expired key (26 ms) [ok]: TIME command using cached time (23 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (54 ms) [ok]: Regression test for #11715 (59 ms) [ok]: Script block the time in some expiration related commands (101 ms) [ok]: RESTORE expired keys with expiration time (20 ms) [ok]: RESP3 based basic invalidation with client reply off (43 ms) [ok]: RESP2 based basic invalidation with client reply off (94 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (62 ms) [ok]: PSYNC2: cluster is consistent after failover (20 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (46 ms) [ok]: Shebang support for lua engine (3 ms) [ok]: Unknown shebang option (3 ms) [ok]: Unknown shebang flag (3 ms) [ok]: allow-oom shebang flag (22 ms) [ok]: no-writes shebang flag (4 ms) [ok]: Coverage: Basic CLIENT CACHING (21 ms) [ok]: Coverage: Basic CLIENT REPLY (5 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (3 ms) [ok]: Coverage: Basic CLIENT GETREDIR (3 ms) [68/92 done]: unit/tracking (7 seconds) Testing unit/cluster/scripting [ok]: no-writes shebang flag on replica (176 ms) [ok]: not enough good replicas (25 ms) [ok]: WAITAOF replica copy everysec with AOFRW (2103 ms) [ok]: Key lazy expires during key migration (57 ms) [ok]: Coverage: Basic cluster commands (40 ms) [ok]: not enough good replicas state change during long script (978 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (252 ms) [ok]: allow-stale shebang flag (49 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (14333 ms) [ok]: Test change cluster-announce-bus-port at runtime (130 ms) [ok]: CONFIG SET port updates cluster-announced port (16 ms) [ok]: reject script do not cause a Lua stack leak (227 ms) [ok]: Detect write load to master (4034 ms) [ok]: Create 3 node cluster (1920 ms) [ok]: Run blocking command on cluster node3 (4 ms) [ok]: Perform a Resharding (90 ms) [ok]: Verify command got unblocked after resharding (37 ms) [69/92 done]: integration/psync2-master-restart (34 seconds) Testing unit/cluster/hostnames [ok]: Consistent eval error reporting (213 ms) [ok]: Wait for cluster to be stable (217 ms) [ok]: LUA redis.error_reply API (14 ms) [70/92 done]: unit/cluster/announced-endpoints (4 seconds) Testing unit/cluster/human-announced-nodename [ok]: LUA redis.error_reply API with empty string (16 ms) [ok]: LUA redis.status_reply API (10 ms) [ok]: LUA test pcall (7 ms) [ok]: LUA test pcall with error (6 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (71 ms) [ok]: LUA test pcall with non string/integer arg (11 ms) [ok]: LUA test trim string as expected (5 ms) [ok]: Sanity test push cmd after resharding (9 ms) [ok]: Run blocking command again on cluster node1 (4 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (8 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (23 ms) [71/92 done]: unit/scripting (22 seconds) Testing unit/cluster/multi-slot-operations [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [72/92 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/slot-ownership [ok]: Function no-cluster flag (15 ms) [ok]: Script no-cluster flag (1 ms) [73/92 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/links [ok]: WAITAOF replica copy everysec with slow AOFRW (2253 ms) [ok]: Kill a cluster node and wait for fail state (1457 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (368 ms) [ok]: WAITAOF replica copy appendfsync always (27 ms) [ok]: Verify command got unblocked after cluster failure (100 ms) [ok]: PSYNC2: generate load while killing replication links (5007 ms) [ok]: PSYNC2: cluster is consistent after load (x = 62467) (5 ms) [ok]: WAITAOF replica copy if replica is blocked (900 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (17 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (4 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (10 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (7 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (2 ms) [ok]: PSYNC2: cluster is consistent after failover (6 ms) [ok]: Set cluster human announced nodename and let it propagate (176 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (180 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (207 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1028 ms) [ok]: Continuous slots distribution (149 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (24 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (46 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (70 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (7048 ms) [ok]: Set cluster hostnames and verify they are propagated (238 ms) [ok]: WAITAOF on promoted replica (512 ms) [74/92 done]: unit/cluster/slot-ownership (4 seconds) Testing unit/cluster/cluster-response-tls [75/92 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Update hostnames and make sure they are all eventually propagated (247 ms) [76/92 done]: unit/cluster/multi-slot-operations (4 seconds) Testing unit/cluster/sharded-pubsub [ok]: Remove hostnames and make sure they are all eventually propagated (346 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (238 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (1787 ms) [77/92 done]: unit/bitops (21 seconds) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6356 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2019 ms) [ok]: Each node has two links with each peer (40 ms) [ok]: Validate cluster links format (2 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (18925 ms) [ok]: Human nodenames are visible in log messages (3660 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (580 ms) [ok]: Sharded pubsub publish behavior within multi/exec (20 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3635 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (20 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (20 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (20 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (16 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (15 ms) [78/92 done]: unit/cluster/human-announced-nodename (7 seconds) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 94782) (6 ms) [ok]: WAITAOF master isn't configured to do AOF (1021 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (11 ms) [ok]: PSYNC2: Bring the master back again for next test (29 ms) [ok]: WAITAOF replica isn't configured to do AOF (149 ms) [79/92 done]: unit/cluster/sharded-pubsub (4 seconds) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (387 ms) [ok]: Client output buffer hard limit is enforced (23584 ms) [ok]: Detect write load to master (2008 ms) [ok]: client evicted due to watched key list (12589 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (4265 ms) [80/92 done]: integration/psync2 (44 seconds) [ok]: Test restart will keep hostname information (386 ms) [ok]: Test hostname validation (16 ms) [ok]: Verify that single primary marks replica as failed (3133 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (1923 ms) [ok]: client evicted due to pubsub subscriptions (1117 ms) [ok]: client evicted due to tracking redirection (115 ms) [81/92 done]: unit/cluster/hostnames (10 seconds) [ok]: WAITAOF master sends PING after last write (1247 ms) [ok]: WAITAOF master client didn't send any write command (1223 ms) [ok]: Migrate the last slot away from a node using redis-cli (5326 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4445 ms) [ok]: WAITAOF master client didn't send any command (1220 ms) [ok]: Disconnect link when send buffer limit reached (9230 ms) [ok]: redis-cli --cluster create with cluster-port (1921 ms) [ok]: Verify that multiple primaries mark replica as failed (3451 ms) [ok]: Link memory increases with publishes (606 ms) [82/92 done]: unit/cluster/failure-marking (12 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7870 ms) [ok]: Link memory resets after publish messages flush (449 ms) [ok]: redis-cli --cluster add-node with cluster-port (1303 ms) [83/92 done]: unit/cluster/links (17 seconds) [ok]: Slave should be able to synchronize with the master (133 ms) [ok]: Detect write load to master (0 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3867 ms) [84/92 done]: unit/cluster/cli (20 seconds) [ok]: GEOSEARCH fuzzy test - byradius (32587 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5990 ms) [ok]: No response for single command if client output buffer hard limit is enforced (122 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2641 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1051 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (23 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (21 ms) [ok]: Obuf limit, KEYS stopped mid-run (91 ms) [85/92 done]: unit/obuf-limits (36 seconds) [ok]: WAITAOF when replica switches between masters, fsync: always (1611 ms) [ok]: setup replication for following tests (121 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (1547 ms) [ok]: client evicted due to client tracking prefixes (14329 ms) [ok]: client evicted due to output buf (16 ms) [ok]: client no-evict on (81 ms) [ok]: client no-evict off (51 ms) [86/92 done]: unit/wait (36 seconds) [ok]: avoid client eviction when client is freed by output buffer limit (251 ms) [ok]: decrease maxmemory-clients causes client eviction (700 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9279 ms) [ok]: evict clients only until below limit (280 ms) [ok]: evict clients in right order (large to small) (354 ms) [ok]: Slave should be able to synchronize with the master (126 ms) [ok]: client total memory grows during client no-evict (198 ms) [ok]: client total memory grows during maxmemory-clients disabled (197 ms) [87/92 done]: unit/client-eviction (33 seconds) [ok]: slave buffer are counted correctly (33265 ms) [ok]: Detect write load to master (2017 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (22408 ms) [ok]: GEOSEARCH fuzzy test - bybox (18143 ms) [ok]: GEOSEARCH box edges fuzzy test (1747 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9291 ms) [88/92 done]: unit/geo (53 seconds) [ok]: Slave should be able to synchronize with the master (890 ms) [ok]: replica buffer don't induce eviction (13327 ms) [ok]: Detect write load to master (3020 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (82 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (257 ms) [ok]: Slave should be able to synchronize with the master (789 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (59481 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: Detect write load to master (3023 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (17496 ms) [ok]: client tracking don't cause eviction feedback loop (7459 ms) [ok]: propagation with eviction (79 ms) [ok]: propagation with eviction in MULTI (86 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (4878 ms) [ok]: lru/lfu value of the key just added (36 ms) [89/92 done]: unit/maxmemory (73 seconds) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6416 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1917 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (704 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [90/92 done]: unit/hyperloglog (70 seconds) [ok]: Slave should be able to synchronize with the master (673 ms) [ok]: Detect write load to master (10 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7917 ms) [ok]: Slave should be able to synchronize with the master (810 ms) [ok]: Detect write load to master (6 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9297 ms) [ok]: Slave should be able to synchronize with the master (777 ms) [ok]: Detect write load to master (2019 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (32158 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9374 ms) [ok]: Slave should be able to synchronize with the master (1758 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (3 ms) [ok]: Detect write load to master (1004 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (36 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (718 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (6 ms) [ok]: Slave should be able to synchronize with the master (830 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (20 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (733 ms) [ok]: Detect write load to master (4037 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (1679 ms) [ok]: Busy script during async loading (1653 ms) [ok]: Blocked commands and configs during async-loading (850 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (20 ms) Waiting for process 44786 to exit... [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6295 ms) Waiting for process 44786 to exit... [ok]: Slave should be able to synchronize with the master (1814 ms) Waiting for process 44786 to exit... [ok]: Detect write load to master (3020 ms) Waiting for process 44786 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (8025 ms) [ok]: Slave should be able to synchronize with the master (667 ms) [ok]: Detect write load to master (1013 ms) Waiting for process 45321 to exit... Waiting for process 45321 to exit... [ok]: diskless loading short read (15969 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9364 ms) [ok]: Slave should be able to synchronize with the master (673 ms) [ok]: Detect write load to master (2020 ms) [ok]: diskless no replicas drop during rdb pipe (12597 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9453 ms) [91/92 done]: integration/replication-psync (194 seconds) [ok]: diskless slow replicas drop during rdb pipe (4402 ms) [ok]: diskless fast replicas drop during rdb pipe (6313 ms) [ok]: diskless all replicas drop during rdb pipe (1639 ms) [ok]: diskless timeout replicas drop during rdb pipe (7629 ms) [ok]: diskless replication child being killed is collected (1636 ms) [ok]: replication child dies when parent is killed - diskless: yes (1596 ms) [ok]: replication child dies when parent is killed - diskless: no (1523 ms) [ok]: diskless replication read pipe cleanup (1070 ms) [ok]: replicaof right after disconnection (6217 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (1184 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (18 ms) [ok]: Discard cache master before loading transferred RDB when full sync (39 ms) [ok]: replica can handle EINTR if use diskless load (811 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (109 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (65 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (138 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (77 ms) [ok]: PSYNC with wrong offset should throw error (12 ms) [ok]: Test replication with lazy expire (138 ms) [92/92 done]: integration/replication (233 seconds) Testing solo test [92/92 done]: list-large-memory (1 seconds) Testing solo test [92/92 done]: set-large-memory (0 seconds) Testing solo test [92/92 done]: defrag (2 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [92/92 done]: violations (2 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [92/92 done]: bitops-large-memory (0 seconds) The End Execution time of different units: 0 seconds - unit/printver 0 seconds - unit/info-command 1 seconds - unit/type/incr 1 seconds - unit/protocol 3 seconds - unit/auth 3 seconds - unit/info 3 seconds - unit/keyspace 0 seconds - unit/quit 7 seconds - unit/type/stream-cgroups 8 seconds - unit/type/hash 1 seconds - unit/acl-v2 7 seconds - unit/multi 10 seconds - unit/sort 13 seconds - unit/scan 6 seconds - unit/acl 14 seconds - unit/expire 16 seconds - unit/type/string 12 seconds - unit/latency-monitor 23 seconds - unit/type/list 23 seconds - unit/other 27 seconds - unit/type/zset 14 seconds - integration/replication-3 28 seconds - unit/type/set 28 seconds - unit/type/list-2 4 seconds - integration/aof-race 33 seconds - unit/dump 22 seconds - integration/replication-2 2 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 1 seconds - integration/logging 27 seconds - integration/block-repl 14 seconds - integration/shutdown 40 seconds - unit/type/stream 19 seconds - integration/replication-buffer 17 seconds - integration/aof 17 seconds - integration/aof-multi-part 6 seconds - integration/failover 4 seconds - integration/redis-benchmark 1 seconds - unit/pubsub 2 seconds - unit/pubsubshard 21 seconds - integration/rdb 3 seconds - unit/slowlog 20 seconds - integration/corrupt-dump-fuzzer 9 seconds - integration/dismiss-mem 39 seconds - integration/replication-4 27 seconds - integration/corrupt-dump 15 seconds - integration/redis-cli 1 seconds - unit/limits 7 seconds - unit/functions 53 seconds - unit/aofrw 19 seconds - integration/psync2-pingoff 58 seconds - unit/type/list-3 23 seconds - integration/psync2-reg 8 seconds - unit/introspection-2 5 seconds - unit/memefficiency 6 seconds - unit/bitfield 1 seconds - unit/tls 2 seconds - unit/pause 6 seconds - unit/lazyfree 1 seconds - unit/oom-score-adj 2 seconds - unit/shutdown 3 seconds - unit/networking 6 seconds - unit/querybuf 0 seconds - unit/violations 16 seconds - unit/introspection 1 seconds - unit/replybufsize 7 seconds - unit/tracking 34 seconds - integration/psync2-master-restart 4 seconds - unit/cluster/announced-endpoints 22 seconds - unit/scripting 4 seconds - unit/cluster/misc 2 seconds - unit/cluster/scripting 4 seconds - unit/cluster/slot-ownership 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/multi-slot-operations 21 seconds - unit/bitops 7 seconds - unit/cluster/human-announced-nodename 4 seconds - unit/cluster/sharded-pubsub 44 seconds - integration/psync2 10 seconds - unit/cluster/hostnames 12 seconds - unit/cluster/failure-marking 17 seconds - unit/cluster/links 20 seconds - unit/cluster/cli 36 seconds - unit/obuf-limits 36 seconds - unit/wait 33 seconds - unit/client-eviction 53 seconds - unit/geo 73 seconds - unit/maxmemory 70 seconds - unit/hyperloglog 194 seconds - integration/replication-psync 233 seconds - integration/replication 1 seconds - list-large-memory 0 seconds - set-large-memory 2 seconds - defrag 2 seconds - violations 0 seconds - bitops-large-memory \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/main/redis/src/redis-7.2.9/src' >>> redis-openrc*: Running split function openrc... >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.9-r0.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 28.0 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.9-r0.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-armv7.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 >>> redis*: Package size: 2.7 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.9-r0.apk >>> redis: Build complete at Fri, 30 May 2025 00:25:10 +0000 elapsed time 0h 4m 35s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20250530.002036) (2/8) Purging linux-headers (6.5-r0) (3/8) Purging openssl-dev (3.1.8-r0) (4/8) Purging tcl (8.6.13-r1) (5/8) Purging tzdata (2025b-r0) (6/8) Purging procps-ng (4.0.4-r0) (7/8) Purging libintl (0.22.3-r0) (8/8) Purging libproc2 (4.0.4-r0) Executing busybox-1.36.1-r19.trigger OK: 272 MiB in 106 packages >>> redis: Updating the main/armv7 repository index... >>> redis: Signing the index...