>>> redis: Building community/redis 7.2.4-r1 (using abuild 3.13.0-r3) started Wed, 01 May 2024 08:07:25 +0000 >>> redis: Checking sanity of /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r0) (2/8) Installing openssl-dev (3.3.0-r1) (3/8) Installing tzdata (2024a-r1) (4/8) Installing tcl (8.6.14-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r0) (7/8) Installing procps-ng (4.0.4-r0) (8/8) Installing .makedepends-redis (20240501.080725) Executing busybox-1.36.1-r26.trigger OK: 332 MiB in 111 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redis-7.2.4.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redis-7.2.4.tar.gz >>> redis: Checking sha512sums... redis-7.2.4.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK >>> redis: Unpacking /var/cache/distfiles/redis-7.2.4.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis MAKE linenoise cd hiredis && make static USE_SSL=1 cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/hiredis' MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/fpconv' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/linenoise' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/hdr_histogram' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o redis-check-aof.c: In function 'processAnnotations': redis-check-aof.c:194:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 194 | printf("AOF %s has nothing before timestamp %ld, " | ~~^ | | | long int | %lld 195 | "aborting...\n", filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC redisassert.o redis-check-aof.c:199:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 199 | printf("Failed to truncate AOF %s to timestamp %ld to offset %ld because it is not the last file.\n", | ~~^ | | | long int | %lld 200 | filename, to_timestamp, (long int)epos); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:207:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 207 | printf("Failed to truncate AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 208 | filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c: In function 'checkSingleAof': redis-check-aof.c:294:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 294 | printf("Truncate nothing in AOF %s to timestamp %ld\n", aof_filename, to_timestamp); | ~~^ ~~~~~~~~~~~~ | | | | long int time_t {aka long long int} | %lld redis-check-aof.c: In function 'printAofStyle': redis-check-aof.c:438:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 438 | printf("Successfully truncated AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 439 | aofFileName, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC cli_common.o CC cli_commands.o CC redis-benchmark.o LINK redis-benchmark LINK redis-cli LINK redis-server INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 65837 Testing unit/printver [ready]: 65836 Testing unit/dump [ready]: 65838 Testing unit/auth [ready]: 65839 Testing unit/protocol [ready]: 65840 Testing unit/keyspace [ready]: 65841 Testing unit/scan [ready]: 65842 Testing unit/info [ready]: 65844 Testing unit/info-command [ready]: 65843 Testing unit/type/string [ready]: 65845 Testing unit/type/incr [ready]: 65846 Testing unit/type/list [ready]: 65847 Testing unit/type/list-2 [ready]: 65848 Testing unit/type/list-3 [ready]: 65849 Testing unit/type/set [ready]: 65850 Testing unit/type/zset [ready]: 65851 Testing unit/type/hash Testing Redis version 7.2.4 (00000000) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: DEL against a single item (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (0 ms) [ok]: INCR against non existing key (0 ms) [ok]: Vararg DEL (0 ms) [ok]: INCR against key created by incr itself (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (1 ms) [ok]: DECR against key created by incr (0 ms) [ok]: Explicit regression for a list bug (1 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: KEYS with pattern (0 ms) [ok]: INCR over 32bit value (0 ms) [ok]: RESTORE can set an absolute expire (0 ms) [ok]: KEYS to get all keys (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: DBSIZE (1 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: INCR fails against key with spaces (left) (1 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: DEL all keys (0 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: RESTORE can set LRU (0 ms) [ok]: SET and GET an item (0 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: SET and GET an empty item (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (1 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: RESTORE can set LFU (1 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: INCR uses shared objects in the 0-9999 range (0 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (1 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: reg node check compression with insert and pop (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (1 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: Check encoding - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: reg node check compression combined with trim (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: ZSET basic ZADD and score update - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: reg node check compression with lset (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCRBYFLOAT decrement (1 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: No negative zero (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: plain node check compression (1 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (0 ms) [ok]: decr operation should update encoding from raw to int (0 ms) [ok]: plain node check compression using lset (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (0 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: HRANDFIELD - listpack (5 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: ZADD NX with non existing key - listpack (1 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (8 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: ZREM removes key after last element is removed - listpack (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: HRANDFIELD - hashtable (5 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: SADD against non set (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANGE basics - listpack (1 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: ZRANK/ZREVRANK basics - listpack (1 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: info command with at most one sub command (1 ms) [ok]: info command with one sub-section (0 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: SADD a non-integer against a large intset (6 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (1 ms) [ok]: ZLEXCOUNT advanced - listpack (1 ms) [ok]: SADD an integer larger than 64 bits to a large intset (6 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: ZREMRANGEBYRANK basics - listpack (2 ms) [ok]: ZREMRANGEBYLEX basics - listpack (7 ms) [ok]: Handle an empty query (44 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (0 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (0 ms) [ok]: ZUNIONSTORE with weights - listpack (1 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: SCAN basic (50 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (0 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (24 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (6 ms) [ok]: Very big payload in GET/SET (50 ms) [ok]: Negative multibulk length (43 ms) [ok]: Out of range multibulk length (0 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (90 ms) [ok]: DUMP of non existing key returns nil (1 ms) [1/89 done]: unit/info-command (0 seconds) Testing unit/type/stream [2/89 done]: unit/printver (0 seconds) Testing unit/type/stream-cgroups [ok]: SADD overflows the maximum allowed integers in an intset - multiple (46 ms) [ok]: SCAN COUNT (54 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: HRANDFIELD with - hashtable (89 ms) [3/89 done]: unit/type/incr (0 seconds) Testing unit/sort [ok]: latencystats: disable/enable (2 ms) [ok]: latencystats: configure percentiles (1 ms) [ok]: latencystats: bad configure percentiles (2 ms) [ok]: Protocol desync regression test #1 (32 ms) [ok]: latencystats: blocking commands (2 ms) [ok]: latencystats: subcommands (1 ms) [ok]: Regression for quicklist #3343 bug (129 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (42 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (0 ms) [ok]: SCAN MATCH (43 ms) [ok]: Protocol desync regression test #2 (32 ms) [ok]: Check compression with recompress (43 ms) [ok]: latencystats: measure latency (51 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (2 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: Protocol desync regression test #3 (31 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: RESP3 attributes (1 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: RESP3 attributes readraw (0 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: test big number parsing (0 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: test bool parsing (0 ms) [ok]: test verbatim str parsing (1 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: errorstats: blocking commands (2 ms) [ok]: HRANDFIELD with - listpack (92 ms) [ok]: XADD wrong number of args (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: SCAN TYPE (67 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: XADD IDs are incremental (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: test large number of args (26 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (1 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: XPENDING only group (0 ms) [ok]: Test LPUSH and LPOP on plain nodes (2 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: Set encoding after DEBUG RELOAD (79 ms) [ok]: SREM basics - $type (1 ms) [ok]: SREM basics - $type (7 ms) [ok]: SREM basics - intset (0 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: XPENDING with IDLE (20 ms) [ok]: XPENDING with exclusive range intervals works as expected (0 ms) [ok]: XACK is able to remove items from the consumer/group PEL (0 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (0 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: SCAN unknown type (46 ms) [ok]: HSET/HLEN - Big hash creation (67 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (22 ms) [ok]: HGET against the small hash (0 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (3 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (0 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (1 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (0 ms) [ok]: SUNION with two sets - regular (5 ms) [ok]: SUNIONSTORE with two sets - regular (6 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (0 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: XADD with MAXLEN option (66 ms) [ok]: SUNION with non existing keys - regular (5 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (4 ms) [ok]: stats: eventloop metrics (111 ms) [ok]: MIGRATE is caching connections (212 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (37 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (2 ms) [ok]: SCAN with expired keys (51 ms) [ok]: HGET against the big hash (47 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (2 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (1 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list - avoid endless loop (2 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (1 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (1 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: Test LSET with packed / plain combinations (94 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (2 ms) [ok]: SUNION with two sets - intset (5 ms) [ok]: SUNIONSTORE with two sets - intset (6 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: XADD with MAXLEN option and the '=' argument (66 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (13 ms) [ok]: SUNION hashtable and listpack (0 ms) [ok]: SDIFF with first set empty (1 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: SCAN with expired keys with TYPE filter (52 ms) [ok]: SSCAN with encoding intset (1 ms) [ok]: SSCAN with encoding listpack (2 ms) [ok]: SSCAN with encoding hashtable (2 ms) [ok]: HSCAN with encoding listpack (0 ms) [ok]: HMSET - big hash (56 ms) [ok]: HMGET against non existing key and fields (1 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (0 ms) [ok]: Quicklist: SORT BY key (9 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: Quicklist: SORT BY hash field (9 ms) [ok]: Crash due to wrongly recompress after lrem (217 ms) [ok]: XADD with MAXLEN option and the '~' argument (55 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: HMGET - big hash (55 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HSCAN with encoding hashtable (64 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (43 ms) [ok]: ZSCAN with encoding listpack (1 ms) [ok]: HKEYS - big hash (8 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (1 ms) [ok]: HGETALL - small hash (1 ms) [ok]: HGETALL - big hash (18 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY against non existing hash key (1 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (1 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: XADD with MINID option (67 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: XTRIM with MINID option (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (1 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (43 ms) [ok]: Test LSET with packed consist only one item (182 ms) [ok]: ZSCAN with encoding skiplist (70 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [4/89 done]: unit/protocol (0 seconds) Testing unit/expire [ok]: HSTRLEN against the big hash (44 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: SCAN guarantees check under write load (13 ms) [ok]: SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: SSCAN with PATTERN (1 ms) [ok]: HSCAN with PATTERN (0 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: Hash fuzzing #1 - 10 fields (19 ms) [ok]: Hash fuzzing #2 - 10 fields (13 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: LPOS basic usage - quicklist (42 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (1 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (89 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (46 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (1 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (0 ms) [ok]: BLPOP: single existing list - quicklist (47 ms) [ok]: XCLAIM can claim PEL items from another consumer (603 ms) [ok]: ZSCAN scores: regression test for issue #2175 (416 ms) [ok]: BLPOP: multiple existing lists - quicklist (86 ms) [ok]: BLPOP: second list has an entry - quicklist (43 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (44 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (0 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (1 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (0 ms) [ok]: RENAMENX basic usage (0 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (0 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (0 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (0 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (87 ms) [ok]: COPY basic usage for list - quicklist (43 ms) [ok]: COPY basic usage for list - listpack (0 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (0 ms) [ok]: COPY basic usage for $type set (10 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (7 ms) [ok]: COPY basic usage for listpack hash (0 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: COPY basic usage for hashtable hash (10 ms) [ok]: BRPOPLPUSH - quicklist (43 ms) [ok]: COPY basic usage for stream (69 ms) [ok]: COPY basic usage for stream-cgroups (5 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (4 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: BLMOVE left left - quicklist (43 ms) [5/89 done]: unit/keyspace (1 seconds) Testing unit/other [ok]: BLMOVE left right - quicklist (43 ms) [ok]: XCLAIM without JUSTID increments delivery count (402 ms) [ok]: BLMOVE right left - quicklist (43 ms) [ok]: BLMOVE right right - quicklist (43 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: BLPOP: multiple existing lists - listpack (2 ms) [ok]: BLPOP: second list has an entry - listpack (0 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (1 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (0 ms) [ok]: BLMOVE right left - listpack (0 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (0 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: Coverage: HELP commands (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (1 ms) [ok]: SAVE - make sure there are all the types as values (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (0 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: BLMPOP with multiple blocked clients (2 ms) [ok]: Linked LMOVEs (1 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (0 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: MASTERAUTH test with binary password (906 ms) [ok]: Hash fuzzing #1 - 512 fields (909 ms) [ok]: XCLAIM same consumer (200 ms) [6/89 done]: unit/auth (1 seconds) Testing unit/multi [ok]: MULTI / EXEC basics (0 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (1 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (0 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: FUZZ stresser with data model binary (402 ms) [ok]: EXEC fail on lazy expired WATCHed key (103 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (2 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (0 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (0 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (0 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (0 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (2 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (0 ms) [ok]: stats: instantaneous metrics (1603 ms) [ok]: stats: debug metrics (112 ms) [ok]: Hash fuzzing #2 - 512 fields (570 ms) [ok]: XADD mass insertion and XLEN (1560 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (0 ms) [ok]: XRANGE COUNT works as expected (1 ms) [ok]: XREVRANGE COUNT works as expected (0 ms) [7/89 done]: unit/info (2 seconds) Testing unit/quit [ok]: XAUTOCLAIM can claim PEL items from another consumer (603 ms) [ok]: Very big payload random access (2068 ms) [ok]: QUIT returns OK (0 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (0 ms) [ok]: FUZZ stresser with data model alpha (434 ms) [ok]: Big Quicklist: SORT BY key (434 ms) [ok]: Big Quicklist: SORT BY key with limit (11 ms) [8/89 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (0 ms) [ok]: XAUTOCLAIM with XDEL (0 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XINFO FULL output (3 ms) [ok]: XRANGE can be used to iterate the whole stream (315 ms) [ok]: BRPOPLPUSH timeout (1013 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: Consumer seen-time and active-time (203 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: ZDIFF fuzzing - listpack (2529 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (1 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (1 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (1 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (2 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (7 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (0 ms) [ok]: ZUNIONSTORE with weights - skiplist (1 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (1 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (1 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: FUZZ stresser with data model compr (389 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (203 ms) [ok]: XREADGROUP with NOACK creates consumer (2 ms) [ok]: Big Quicklist: SORT BY hash field (434 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (1 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: SDIFF fuzzing (2394 ms) [ok]: SDIFF against non-set should throw error (0 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (0 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (103 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (1 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (5 ms) [ok]: SPOP basics - intset (0 ms) [ok]: SPOP with =1 - intset (1 ms) [ok]: SRANDMEMBER - intset (4 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (2 ms) [ok]: SPOP with - intset (2 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (2 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (1 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: SPOP new implementation: code path #3 intset (2 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: SPOP new implementation: code path #2 listpack (1 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (8 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (1 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (13 ms) [ok]: SRANDMEMBER with - intset (11 ms) [ok]: SRANDMEMBER with - hashtable (13 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (815 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (3 ms) [ok]: Hash table: SORT BY key (9 ms) [ok]: Hash table: SORT BY key with limit (1 ms) [ok]: Consumer group lag with XDELs (6 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: Hash table: SORT BY hash field (9 ms) [ok]: SRANDMEMBER histogram distribution - listpack (51 ms) [ok]: Hash ziplist of various encodings (88 ms) [ok]: SRANDMEMBER histogram distribution - intset (51 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (1 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (301 ms) [ok]: BLPOP when new key is moved into place (0 ms) [ok]: BLPOP when result key is created by SORT..STORE (1 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (0 ms) [ok]: BLPOP: with zero timeout should block indefinitely (0 ms) [ok]: BGSAVE (103 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: WATCH will consider touched expired keys (1104 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (0 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (52 ms) [9/89 done]: unit/type/hash (3 seconds) Testing unit/acl [ok]: MULTI / EXEC is not propagated (single write command) (65 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (103 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (1 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (1 ms) [ok]: Test password hashes validate input (0 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (1 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (0 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: By default, only default user is able to subscribe to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (0 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: It's possible to allow subscribing to a subset of channels (0 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (0 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (0 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: ACLs can include single subcommands (0 ms) [ok]: ACLs can exclude single subcommands, case 1 (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (0 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (0 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (1 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1022 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: ACL GETUSER provides reasonable results (9 ms) [ok]: ACL GETUSER provides correct results (3 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (1 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (4 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (0 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (0 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (0 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (1 ms) [ok]: ACL LOG can log failed auth attempts (0 ms) [ok]: ACL LOG entries are limited to a maximum amount (2 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (0 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (1 ms) [ok]: ACL GENPASS command failed test (0 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (3 ms) [ok]: ACL-Metrics invalid command accesses (2 ms) [ok]: ACL-Metrics invalid key accesses (2 ms) [ok]: ACL-Metrics invalid channels accesses (2 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (102 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (101 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (0 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL load and save (1 ms) [ok]: ACL load and save with restricted channels (1 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: Check consistency of different data types after a reload (469 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (100 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (103 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (2 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (103 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: Same dataset digest if saving/reloading as AOF? (140 ms) [ok]: MULTI / EXEC with REPLICAOF (108 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (161 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (52 ms) [ok]: SETEX - Wait for the key to expire (1102 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (0 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1493 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [10/89 done]: unit/type/stream-cgroups (4 seconds) Testing unit/acl-v2 [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: BLPOP: timeout (1074 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: BLPOP: arguments are empty (1 ms) [ok]: Test deleting selectors (0 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: BRPOP: with single empty list argument (0 ms) [ok]: BRPOP: with negative timeout (1 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: Test flexible selector definition (1 ms) [ok]: Test separate read permission (0 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (0 ms) [ok]: Test SET with separate write permission (0 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (0 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: MULTI and script timeout (403 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (1 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (2 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (0 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (1 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BRPOP: second argument is not a list (0 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: Test behavior of loading ACLs (0 ms) [11/89 done]: unit/acl-v2 (0 seconds) Testing unit/latency-monitor [ok]: Test loading an ACL file with duplicate users (2 ms) [ok]: Test loading an ACL file with duplicate default user (2 ms) [ok]: Test loading duplicate users in config on startup (10 ms) [ok]: EXEC and script timeout (402 ms) [ok]: LATENCY HISTOGRAM with empty histogram (0 ms) [ok]: LATENCY HISTOGRAM all commands (1 ms) [ok]: LATENCY HISTOGRAM sub commands (0 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: XREAD with non empty second stream (798 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: Blocking XREAD will not reply with an empty array (96 ms) [ok]: Big Hash table: SORT BY key (421 ms) [ok]: Big Hash table: SORT BY key with limit (13 ms) [ok]: ACL from config file and config rewrite (203 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (101 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (1 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (1 ms) [12/89 done]: unit/acl (2 seconds) Testing integration/block-repl [ok]: MULTI-EXEC body and script timeout (403 ms) [ok]: EXPIRE precision is now the millisecond (1102 ms) [ok]: PSETEX can set sub-second expires (102 ms) [ok]: ZDIFF fuzzing - skiplist (2441 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (2 ms) [ok]: ZMPOP with illegal argument (1 ms) [ok]: PEXPIRE can set sub-second expires (101 ms) [ok]: BRPOP: timeout (1077 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (0 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (0 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (20 ms) [ok]: BLMPOP_LEFT: second argument is not a list (0 ms) [ok]: Big Hash table: SORT BY hash field (414 ms) [ok]: ZMPOP propagate as pop with count command to replica (88 ms) [ok]: LTRIM stress testing - quicklist (5201 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (1 ms) [ok]: SORT GET (key and hash) with sanity check (2 ms) [ok]: SORT BY key STORE (0 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (0 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (0 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (8 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: SORT speed, 100 element list BY key, 100 times (18 ms) [ok]: just EXEC and script timeout (402 ms) [ok]: exec with write commands and state change (1 ms) [ok]: exec with read commands and stale replica state change (2 ms) [ok]: EXEC with only read commands should not be rejected when OOM (0 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (20 ms) [ok]: SORT speed, 100 element list directly, 100 times (12 ms) [ok]: SORT speed, 100 element list BY , 100 times (11 ms) [ok]: SETRANGE with huge offset (2 ms) [13/89 done]: unit/sort (5 seconds) Testing integration/replication [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (1 ms) [ok]: MULTI propagation of PUBLISH (96 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (198 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: MULTI propagation of SCRIPT LOAD (100 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: MULTI propagation of EVAL (101 ms) [ok]: BZMPOP readraw in RESP3 (198 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: SETNX against expired volatile key (2505 ms) [ok]: GETEX EX option (1 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: MULTI propagation of SCRIPT FLUSH (100 ms) [ok]: GETDEL propagate as DEL command to replica (46 ms) [ok]: MULTI propagation of XREADGROUP (102 ms) [ok]: MULTI with SAVE (0 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (199 ms) [ok]: ZMPOP readraw in RESP2 (1 ms) [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: MGET (8 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (1 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (1 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (1 ms) [ok]: SETBIT against integer-encoded key (0 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (0 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2106 ms) [ok]: Redis should actively expire keys incrementally (602 ms) [ok]: MULTI with BGREWRITEAOF (204 ms) [ok]: BZMPOP readraw in RESP2 (200 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: First server should have role slave after SLAVEOF (1001 ms) [ok]: SETBIT fuzzing (268 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (0 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (0 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: ZUNIONSTORE result is sorted (114 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (1 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (22 ms) [ok]: ZMSCORE - listpack (22 ms) [ok]: MULTI with config set appendonly (203 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (26 ms) [ok]: XDEL fuzz test (1348 ms) [ok]: ZSET sorting stresser - listpack (30 ms) [ok]: BLMPOP_LEFT: timeout (1077 ms) [ok]: BLMPOP_LEFT: arguments are empty (2 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: SCAN regression test for issue #4906 (5446 ms) [ok]: MULTI with FLUSHALL and AOF (1 ms) [14/89 done]: unit/scan (6 seconds) Testing integration/replication-2 [15/89 done]: unit/multi (5 seconds) Testing integration/replication-3 [ok]: PIPELINING stresser (also a regression for the old epoll bug) (898 ms) [ok]: APPEND basics (1 ms) [ok]: APPEND basics, integer encoded values (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: GETRANGE fuzzing (717 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (1 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (0 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (0 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (0 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (0 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: APPEND fuzzing (173 ms) [16/89 done]: unit/type/string (7 seconds) Testing integration/replication-4 [ok]: Redis should lazy expire keys (1001 ms) [ok]: FLUSHDB (52 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (0 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (0 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (0 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: BLMPOP_RIGHT: timeout (1075 ms) [ok]: BLMPOP_RIGHT: arguments are empty (2 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (0 ms) [ok]: Don't rehash if redis has child process (417 ms) [ok]: BLMPOP propagate as pop with count command to replica (199 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (47 ms) [ok]: LINSERT - quicklist (44 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (1 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (48 ms) [ok]: Process title set as expected (1 ms) [ok]: LINDEX random access - listpack (34 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (67 ms) [17/89 done]: unit/other (7 seconds) Testing integration/replication-psync [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1639 ms) [ok]: Test latency events logging (3402 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (0 ms) [ok]: LINDEX consistency test - listpack (88 ms) [ok]: LINDEX random access - listpack (55 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (0 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (1 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (1 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (156 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (108 ms) [ok]: LINDEX consistency test - quicklist (37 ms) [ok]: LINDEX random access - quicklist (26 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (7 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (52 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (228 ms) [ok]: LINDEX consistency test - quicklist (74 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (19 ms) [ok]: LINDEX random access - quicklist (53 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (103 ms) [ok]: LLEN against non-list value error (1 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (47 ms) [ok]: LMOVE left left base case - quicklist (43 ms) [ok]: LMOVE left right base case - quicklist (44 ms) [ok]: LMOVE right left base case - quicklist (43 ms) [ok]: LMOVE right right base case - quicklist (43 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (43 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (44 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (43 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (516 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (43 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (86 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (86 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (87 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (86 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (86 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (44 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (43 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (44 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (9010 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (46 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (0 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (0 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (44 ms) [ok]: SRANDMEMBER with a dict containing long chain (6585 ms) [ok]: SMOVE basics - from regular set to intset (1 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2820 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: SMOVE from intset to non existing destination set (0 ms) [ok]: SMOVE wrong src key type (1 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (44 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (44 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (1 ms) [ok]: LMOVE left left with listpack source and existing target listpack (0 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (0 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (0 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (42 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1001 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (0 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (86 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Mass RPOP/LPOP - listpack (26 ms) [ok]: Mass RPOP/LPOP - listpack (50 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: MASTER and SLAVE consistency with expire (3115 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (23 ms) [ok]: LMPOP single existing list - quicklist (130 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2010 ms) [ok]: LMPOP multiple existing lists - quicklist (173 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: LMPOP multiple existing lists - listpack (2 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (69 ms) [ok]: LMPOP propagate as pop with count command to replica (34 ms) [ok]: LRANGE basics - quicklist (41 ms) [ok]: LRANGE inverted indexes - quicklist (44 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (4 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (43 ms) [ok]: LRANGE out of range negative end index - quicklist (43 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (299 ms) [ok]: LTRIM stress testing - listpack (5555 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (1 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (15 ms) [18/89 done]: unit/type/list-2 (11 seconds) Testing integration/replication-buffer [ok]: ZMSCORE - skiplist (14 ms) [ok]: intsets implementation stress testing (1248 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (19 ms) [ok]: ZSET sorting stresser - skiplist (20 ms) [19/89 done]: unit/type/set (11 seconds) Testing integration/shutdown [ok]: LTRIM basics - quicklist (520 ms) [ok]: LTRIM out of range negative end index - quicklist (87 ms) [ok]: LSET - quicklist (43 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (6 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (0 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (1 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (42 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (43 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (42 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (3 ms) [ok]: client unblock tests (1 ms) [ok]: List listpack -> quicklist encoding conversion (1 ms) [ok]: List listpack -> quicklist encoding conversion (171 ms) [ok]: List quicklist -> listpack encoding conversion (216 ms) [ok]: List encoding conversion when RDB loading (3 ms) [ok]: List invalid list-max-listpack-size config (47 ms) [ok]: List of various encodings (47 ms) [ok]: List of various encodings - sanitize dump (2 ms) [ok]: Unblock fairness is kept while pipelining (1 ms) [ok]: Unblock fairness is kept during nested unblock (2 ms) [ok]: Blocking command accounted only once in commandstats (1 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (43 ms) [20/89 done]: unit/type/list (12 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [ok]: Short read: Server should start if load-truncated is yes (0 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (0 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (4234 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1274 ms) [21/89 done]: unit/latency-monitor (8 seconds) Testing integration/aof-race [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (126 ms) [ok]: Bad format: Server should have logged an error (0 ms) [ok]: Test replication with parallel clients writing in different DBs (5243 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (177 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (12 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (6 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (5 ms) [ok]: Short read: Utility should be able to fix the AOF (5 ms) [ok]: Fixed AOF: Server should have been started (0 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [22/89 done]: integration/aof-race (0 seconds) Testing integration/aof-multi-part [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2002 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1900 ms) [ok]: Multi Part AOF can't load data when some file missing (108 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (82 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (0 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (449 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (0 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (0 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (0 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: First server should have role slave after SLAVEOF (100 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (0 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (0 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (0 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (107 ms) [ok]: Redis should not propagate the read command on lazy expire (94 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (107 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (108 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (0 ms) [ok]: All replicas share one global replication buffer (45 ms) [ok]: Replication buffer will become smaller when no replica uses (2 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (108 ms) [23/89 done]: unit/expire (13 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (108 ms) [ok]: test old version rdb file (1 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (108 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (108 ms) [ok]: RDB encoding loading test (4 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (108 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (109 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (4324 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Multi Part AOF can start when no aof and no manifest (120 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (119 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (121 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (121 ms) [ok]: Test RDB stream encoding (60 ms) [ok]: Test RDB stream encoding - sanitize dump (4 ms) [24/89 done]: integration/replication-2 (8 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can load data when some AOFs are empty (121 ms) [ok]: Server should not start if RDB file can't be open (1 ms) [ok]: corrupt payload: #7445 - with sanitize (212 ms) [ok]: Server should not start if RDB is corrupted (0 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (1796 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (216 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (213 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (217 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1001 ms) [ok]: BZPOP/BZMPOP against wrong type (1 ms) [ok]: BZMPOP with illegal argument (1 ms) [ok]: BZMPOP with multiple blocked clients (3 ms) [ok]: corrupt payload: invalid zlbytes header (214 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (122 ms) [ok]: Test FLUSHALL aborts bgsave (299 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6315 ms) [ok]: bgsave resets the change counter (101 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (122 ms) [ok]: BZMPOP propagate as pop with count command to replica (198 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (2 ms) [ok]: corrupt payload: valid zipped hash header, dup records (212 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (112 ms) [ok]: MIGRATE cached connections are released after some time (15001 ms) [ok]: corrupt payload: quicklist big ziplist prev len (214 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: MIGRATE is able to migrate a key between two instances (214 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (103 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: corrupt payload: quicklist small ziplist prev len (213 ms) [ok]: ZSET skiplist order consistency when elements are moved (484 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (1 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (5 ms) [ok]: Replication backlog size can outgrow the backlog limit config (999 ms) [ok]: ZRANDMEMBER - skiplist (5 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (103 ms) [ok]: MIGRATE is able to copy a key between two instances (213 ms) [ok]: ZRANDMEMBER with - skiplist (154 ms) [ok]: corrupt payload: quicklist ziplist wrong count (217 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (631 ms) [ok]: ZRANDMEMBER with - listpack (152 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (8 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (4 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (215 ms) [ok]: Slave is able to evict keys created in writable slaves (6003 ms) [25/89 done]: unit/type/zset (16 seconds) Testing integration/corrupt-dump-fuzzer [ok]: corrupt payload: #3080 - quicklist (212 ms) [ok]: Writable replica doesn't return expired keys (101 ms) [ok]: PFCOUNT updates cache on readonly replica (0 ms) [ok]: Set instance A as slave of B (100 ms) [ok]: INCRBYFLOAT replication, should not remove expire (2 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (1 ms) [ok]: MIGRATE propagates TTL correctly (218 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (344 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (101 ms) [ok]: corrupt payload: quicklist with empty ziplist (212 ms) [ok]: client freed during loading (1187 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (217 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (13870 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (212 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (217 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (3722 ms) [26/89 done]: integration/replication-3 (10 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: corrupt payload: quicklist listpack entry start with EOF (213 ms) [ok]: Shutting down master waits for replica timeout (2100 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: corrupt payload: #3080 - ziplist (214 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (107 ms) [ok]: Test RDB load info (524 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1482 ms) [ok]: BRPOPLPUSH replication, list exists (1002 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (218 ms) [ok]: AOF enable will create manifest file (512 ms) [27/89 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: XRANGE fuzzing (11116 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (0 ms) [ok]: XTRIM with MAXLEN option basic test (60 ms) [ok]: XADD with LIMIT consecutive calls (6 ms) [ok]: XTRIM with ~ is limited (6 ms) [ok]: XTRIM without ~ is not limited (5 ms) [ok]: XTRIM without ~ and with LIMIT (6 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (0 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (219 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (7 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (463 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: listpack invalid size header (213 ms) [ok]: Replication of an expired key does not delete the expired key (514 ms) [28/89 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: XADD with MINID > lastid can propagate correctly (7 ms) [ok]: corrupt payload: listpack too long entry len (121 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (0 ms) [ok]: corrupt payload: listpack very long entry len (120 ms) [ok]: Shutting down master waits for replica then fails (1242 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (7 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: corrupt payload: listpack too long entry prev len (213 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8615 ms) [ok]: BLMOVE (left, left) replication, list exists (1003 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [29/89 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/logging [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (7 ms) [ok]: Crash report generated on SIGABRT (2 ms) [ok]: corrupt payload: stream with duplicate consumers (213 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [30/89 done]: integration/logging (0 seconds) Testing integration/psync2 [ok]: XADD with ~ MINID can propagate correctly (8 ms) [ok]: Shutting down master waits for replica then aborted (543 ms) [31/89 done]: integration/shutdown (7 seconds) Testing integration/psync2-reg [ok]: corrupt payload: hash ziplist with duplicate records (212 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1334 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (7 ms) [ok]: AOF fsync always barrier issue (5324 ms) [ok]: corrupt payload: hash listpack with duplicate records (213 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (125 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (7 ms) [ok]: GETEX should not append to AOF (0 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: Test child sending info (1906 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (475 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [ok]: corrupt payload: hash ziplist uneven record count (213 ms) [ok]: XADD can CREATE an empty stream (0 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (1 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: BLMOVE (left, right) replication, list exists (1002 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (1 ms) [ok]: AOF enable/disable auto gc (204 ms) [ok]: script won't load anymore if it's in rdb (1 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (101 ms) [ok]: corrupt payload: hash duplicate records (213 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (0 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: AOF can produce consecutive sequence number after reload (132 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [ok]: corrupt payload: hash empty zipmap (213 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (119 ms) [ok]: Empty stream can be rewrite into AOF correctly (108 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (101 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (301 ms) [ok]: failed bgsave prevents writes (204 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (104 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (120 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [32/89 done]: integration/rdb (6 seconds) Testing integration/psync2-pingoff [ok]: PSYNC2 #3899 regression: setup (1003 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (214 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (1 ms) [33/89 done]: unit/type/stream (20 seconds) Testing integration/psync2-master-restart [ok]: Generate timestamp annotations in AOF (330 ms) [ok]: BLMOVE (right, left) replication, list exists (1002 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (1 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (214 ms) [ok]: Successfully load AOF which has timestamp annotations inside (0 ms) [ok]: AOF will trigger limit when AOFRW fails many times (621 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (213 ms) [ok]: MIGRATE can correctly transfer large values (4360 ms) [ok]: corrupt payload: fuzzer findings - hash crash (212 ms) [ok]: Truncate AOF to specific timestamp (393 ms) [ok]: MIGRATE can correctly transfer hashes (213 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (212 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (129 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3131 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: PSYNC2 pingoff: setup (1002 ms) [ok]: PSYNC2 pingoff: write and wait replication (0 ms) [ok]: BLMOVE (right, right) replication, list exists (1002 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (212 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (111 ms) [ok]: BLPOP followed by role change, issue #2473 (203 ms) [ok]: corrupt payload: fuzzer findings - empty intset (213 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: MIGRATE timeout actually works (631 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (213 ms) [ok]: MIGRATE can migrate multiple keys at once (213 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (213 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (213 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (0 ms) [ok]: SET on the master should immediately propagate (1 ms) [ok]: FLUSHDB / FLUSHALL should replicate (91 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (1 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (213 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (214 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1121 ms) [34/89 done]: integration/replication-buffer (11 seconds) Testing integration/failover [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (212 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (213 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (212 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (212 ms) [35/89 done]: unit/dump (22 seconds) Testing integration/redis-cli [ok]: setup replication for following tests (102 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (1 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (213 ms) [ok]: Interactive CLI: INFO response should be printed raw (60 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1114 ms) [ok]: Interactive CLI: Status reply (60 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (120 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (2168 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2382 ms) [ok]: Interactive CLI: Bulk reply (62 ms) [ok]: Interactive CLI: Multi-bulk reply (61 ms) [36/89 done]: integration/aof-multi-part (11 seconds) Testing integration/redis-benchmark [ok]: corrupt payload: fuzzer findings - stream integrity check issue (215 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: EVAL can process writes from AOF in read-only replicas (220 ms) [ok]: Test redis-check-aof for old style resp AOF (5 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (5 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (6 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (6 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (10 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (6 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (120 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (3 ms) [ok]: benchmark: set,get (4 ms) [ok]: benchmark: connecting using URI set,get (4 ms) [ok]: benchmark: connecting using URI with authentication set,get (3 ms) [37/89 done]: integration/aof (11 seconds) Testing integration/dismiss-mem [ok]: benchmark: full test suite (58 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (213 ms) [ok]: Interactive CLI: Parsing quotes (413 ms) [ok]: failover command to specific replica works (824 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7950 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (214 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (121 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: benchmark: multi-thread set,get (508 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (213 ms) [ok]: benchmark: pipelined full set,get (86 ms) [ok]: benchmark: arbitrary command (5 ms) [ok]: benchmark: keyspace length (17 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (2 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: Interactive CLI: Subscribed mode (594 ms) [38/89 done]: integration/redis-benchmark (1 seconds) Testing unit/pubsub [ok]: corrupt payload: fuzzer findings - valgrind invalid read (214 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (0 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (0 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (1 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (0 ms) [ok]: PubSub messages with CLIENT REPLY OFF (84 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (0 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: Keyspace notifications: we receive keyspace notifications (41 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (213 ms) [ok]: failover command to any replica works (924 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Keyspace notifications: we receive keyevent notifications (43 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (0 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (1 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (0 ms) [ok]: Keyspace notifications: stream events test (1 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (413 ms) [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: Non-interactive TTY CLI: Integer reply (1 ms) [ok]: Non-interactive TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (1 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (12 ms) [ok]: Non-interactive non-TTY CLI: Status reply (2 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (1 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (120 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (53 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (1 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (8 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (2 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1737 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (8 ms) [ok]: dismiss all data types memory (1123 ms) [ok]: Keyspace notifications: expired events (background expire) (109 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (1 ms) [ok]: Keyspace notifications: new key test (0 ms) [ok]: publish to self inside multi (1 ms) [ok]: publish to self inside script (0 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (214 ms) [39/89 done]: unit/pubsub (0 seconds) Testing unit/pubsubshard [ok]: failover to a replica with force works (422 ms) [ok]: dismiss client output buffer (223 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (0 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (0 ms) [ok]: PubSubShard with CLIENT REPLY OFF (85 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (214 ms) [ok]: dismiss client query buffer (203 ms) [ok]: corrupt payload: fuzzer findings - huge string (213 ms) [ok]: setup replication for following tests (101 ms) [ok]: publish message to master and receive on replica (1 ms) [ok]: failover with timeout aborts if replica never catches up (548 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (213 ms) [ok]: failovers can be aborted (19 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (121 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (213 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (120 ms) [ok]: failover aborts if target rejects sync request (523 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (215 ms) [40/89 done]: unit/pubsubshard (2 seconds) Testing unit/slowlog [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9935 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (213 ms) [ok]: dismiss replication backlog (1323 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (200 ms) [ok]: SLOWLOG - max entries is correctly handled (4 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (1 ms) [ok]: SLOWLOG - RESET subcommand works (1 ms) [ok]: Dumping an RDB - functions only: no (1859 ms) [41/89 done]: integration/dismiss-mem (3 seconds) Testing unit/scripting [ok]: corrupt payload: fuzzer findings - empty zset (213 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1931 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: SLOWLOG - logged entry sanity check (200 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (1 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (1 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (3 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (0 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (213 ms) [42/89 done]: integration/psync2-master-restart (6 seconds) Testing unit/functions [ok]: EVAL - cmsgpack pack/unpack smoke test (215 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (8548 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: redis.sha1hex() implementation (2 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (200 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: FUNCTION - test fcall bad arguments (1 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (1 ms) [ok]: FUNCTION - test debug reload different options (1 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (1 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (0 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (0 ms) [ok]: FUNCTION - test function dump and restore with append argument (1 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (1 ms) [ok]: FUNCTION - test fcall_ro with read only commands (0 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (213 ms) [ok]: SLOWLOG - can clean older entries (200 ms) [43/89 done]: integration/failover (5 seconds) Testing unit/maxmemory [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (214 ms) [ok]: Make the old master a replica of the new one and check conditions (1003 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (42 ms) [ok]: FUNCTION - test function kill (402 ms) [ok]: Dumping an RDB - functions only: yes (865 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (213 ms) [ok]: Scan mode (49 ms) [ok]: SLOWLOG - can be disabled (400 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (121 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (256 ms) [ok]: EVAL does not leak in the Lua stack (696 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (1 ms) [44/89 done]: unit/slowlog (1 seconds) Testing unit/introspection [ok]: corrupt payload: fuzzer findings - lpFind invalid access (119 ms) [ok]: Script return recursive object (104 ms) [ok]: Script check unpack with massive arguments (47 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (0 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: FUNCTION - test script kill not working on function (403 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (1 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (2 ms) [ok]: CLIENT KILL close the client connection during bgsave (94 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (212 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (42 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (43 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (43 ms) [ok]: MONITOR can log executed commands (0 ms) [ok]: MONITOR can log commands issued by the scripting engine (0 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (1 ms) [ok]: MONITOR correctly handles multi-exec cases (0 ms) [ok]: MONITOR log blocked command only once (1 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (1 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (0 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (1 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (213 ms) [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (1 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (612 ms) [ok]: PSYNC2: generate load while killing replication links (5001 ms) [ok]: PSYNC2: cluster is consistent after load (x = 69465) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (54 ms) [ok]: Replication: commands with many arguments (issue #1221) (9996 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (213 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: spopwithcount rewrite srem command (74 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (83 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (249 ms) [ok]: Timedout script does not cause a false dead client (89 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (217 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (0 ms) [ok]: Timedout script link is still usable after Lua returns (138 ms) [ok]: Disconnecting the replica from master instance (101 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (1 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (213 ms) [ok]: CONFIG save params special case handled properly (883 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (393 ms) [ok]: CONFIG sanity (14 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (214 ms) [45/89 done]: integration/corrupt-dump (14 seconds) Testing unit/introspection-2 [ok]: Timedout scripts and unblocked command (374 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: CONFIG REWRITE sanity (189 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (709 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (0 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (142 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (307 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (2 ms) [ok]: Data divergence is allowed on writable replicas (1 ms) [ok]: Connecting as a replica (2165 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (317 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (656 ms) [ok]: CONFIG SET with multiple args (0 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (2 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (3 ms) [ok]: CONFIG GET multiple args (0 ms) [46/89 done]: integration/replication-4 (22 seconds) Testing unit/limits [ok]: redis-server command line arguments - error cases (56 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (0 ms) [ok]: LIBRARIES - test registration failure revert the entire load (1 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (1 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (1 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (287 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (214 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (286 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (214 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (1 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (282 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (213 ms) [ok]: Piping raw protocol (873 ms) [ok]: Options -X with illegal argument (4 ms) [ok]: DUMP RESTORE with -x option (7 ms) [ok]: DUMP RESTORE with -X option (8 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (1 ms) [ok]: FUNCTION - deny oom (0 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redis version api (1 ms) [ok]: FUNCTION - function stats (0 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [47/89 done]: integration/redis-cli (8 seconds) Testing unit/obuf-limits [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (213 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [48/89 done]: unit/functions (4 seconds) Testing unit/bitops [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (273 ms) [ok]: CONFIG SET client-output-buffer-limit (0 ms) [ok]: BITCOUNT returns 0 against non existing key (0 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (1 ms) [ok]: Check if maxclients works refusing connections (905 ms) [49/89 done]: unit/limits (1 seconds) Testing unit/bitfield [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (283 ms) [ok]: BITCOUNT fuzzing without start/end (215 ms) [ok]: BITFIELD signed SET and GET basics (0 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (0 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (0 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: BITFIELD overflow detection fuzzing (163 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (335 ms) [ok]: Test replication with blocking lists and sorted sets operations (25004 ms) [ok]: BITCOUNT fuzzing with start/end (379 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (0 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (0 ms) [ok]: BITFIELD overflow wrap fuzzing (216 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [50/89 done]: integration/block-repl (26 seconds) Testing unit/geo [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3515 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: GEO with non existing src key (1 ms) [ok]: GEO BYLONLAT with empty search (0 ms) [ok]: GEO BYMEMBER with non existing member (1 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (1 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (1 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (1 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (0 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (0 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (1 ms) [ok]: GEODIST simple & unit (0 ms) [ok]: GEODIST missing elements (1 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: BITOP and fuzzing (237 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (388 ms) [ok]: redis-server command line arguments - save with empty input (1067 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: BITOP or fuzzing (142 ms) [ok]: Script - disallow write on OOM (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [51/89 done]: unit/bitfield (1 seconds) Testing unit/memefficiency [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (214 ms) [ok]: BITOP xor fuzzing (262 ms) [ok]: BITOP NOT fuzzing (30 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (1 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (2 ms) [ok]: BITPOS bit=0 works with intervals (0 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (3 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (385 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (182 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (12 ms) [ok]: SCRIPTING FLUSH ASYNC (6 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (1 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (144 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: cannot modify protected configuration - local (4 ms) [ok]: Memory efficiency with values in range 32 (345 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (190 ms) [ok]: EVAL does not leak in the Lua stack (301 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (354 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (78 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (162 ms) [ok]: MGET: mget shouldn't be propagated in Lua (100 ms) [52/89 done]: unit/bitops (2 seconds) Testing unit/hyperloglog [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (101 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Memory efficiency with values in range 64 (351 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (353 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (317 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: Memory efficiency with values in range 128 (353 ms) [ok]: Script return recursive object (104 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (350 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Script check unpack with massive arguments (47 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: HyperLogLog self test passes (501 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (332 ms) [ok]: Memory efficiency with values in range 1024 (398 ms) [ok]: HyperLogLogs are promote from sparse to dense (330 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: config during loading (1124 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9442 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (34 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (401 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (333 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (183 ms) [ok]: CONFIG REWRITE handles rename-command properly (332 ms) [ok]: Timedout script does not cause a false dead client (82 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: Timedout script link is still usable after Lua returns (136 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (351 ms) [ok]: HyperLogLog sparse encoding stress test (617 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (1 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Timedout scripts and unblocked command (378 ms) [ok]: CONFIG REWRITE handles alias config properly (664 ms) [53/89 done]: unit/introspection (7 seconds) Testing unit/lazyfree [ok]: Memory efficiency with values in range 16384 (1110 ms) [54/89 done]: unit/memefficiency (3 seconds) Testing unit/wait [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (201 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: UNLINK can reclaim memory in background (237 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Setup slave (101 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (0 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (1 ms) [ok]: Replication of script multiple pushes to list with BLPOP (0 ms) [ok]: EVALSHA replication when first call is readonly (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: TOUCH alters the last access time of a key (3002 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (241 ms) [ok]: lazy free a stream with all types of metadata (54 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2913 ms) [55/89 done]: unit/lazyfree (1 seconds) Testing unit/pause [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (344 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (1 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: Test both active and passive expires are skipped during client pause (101 ms) [ok]: Test that client pause starts at the end of a transaction (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9860 ms) [56/89 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/querybuf [ok]: WAIT should not acknowledge 2 additional copies of the data (1080 ms) [ok]: Client output buffer hard limit is enforced (5424 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (0 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1102 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (0 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (1 ms) [ok]: command stats for scripts (1 ms) [ok]: COMMAND COUNT get total number of Redis commands (1 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: Test when replica paused, offset would not grow (3 ms) [ok]: COMMAND GETKEYSANDFLAGS (0 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (1 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: Test replica offset would grow after unpause (1 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (1 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (2 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (0 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (0 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: LMOVE command will not be marked with movablekeys (0 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (0 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (0 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (0 ms) [57/89 done]: unit/introspection-2 (8 seconds) Testing unit/tls [58/89 done]: unit/pause (1 seconds) Testing unit/tracking [59/89 done]: integration/psync2-pingoff (17 seconds) Testing unit/oom-score-adj [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (0 ms) [ok]: CONFIG SET oom-score-adj works as expected (13 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (0 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [60/89 done]: unit/tls (0 seconds) Testing unit/shutdown [61/89 done]: unit/oom-score-adj (0 seconds) Testing unit/networking [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (116 ms) [ok]: CONFIG SET port number (212 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (12 ms) [ok]: Temp rdb will be deleted in signal handle (83 ms) [ok]: CONFIG SET bind address (213 ms) [ok]: RDB save will be failed in shutdown (2 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (97 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (0 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (1 ms) [ok]: Clean up rdb same named folder (0 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1103 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 127002) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (1 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (1 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (98 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [62/89 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: CONFIG SET bind-source-addr (518 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: Tracking gets notification of lazy expired keys (101 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (1 ms) [ok]: RESP3 based basic invalidation (0 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (0 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (0 ms) [ok]: Different clients using different protocols can track the same key (0 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: Invalidation message sent when using OPTOUT option (0 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Able to redirect to a RESP3 client (1 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (0 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Script block the time in some expiration related commands (81 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: client evicted due to large argv (39 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (110 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (0 ms) [ok]: Tracking invalidation message of eviction keys should be before response (2 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: client evicted due to large query buf (26 ms) [ok]: client evicted due to percentage of maxmemory (7 ms) [ok]: client evicted due to large multi buf (51 ms) [ok]: Tracking gets notification on tracking table key eviction (77 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (1 ms) [ok]: Test ASYNC flushall (2 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: Default bind address configuration handling (207 ms) [ok]: Protected mode works as expected (3 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (0 ms) [ok]: no-writes shebang flag (1 ms) [63/89 done]: unit/networking (1 seconds) Testing unit/violations [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (201 ms) [ok]: Tracking info is correct (2 ms) [ok]: CLIENT GETREDIR provides correct client id (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (1 ms) [ok]: Regression test for #11715 (1 ms) [ok]: RESP3 based basic invalidation with client reply off (2 ms) [ok]: RESP2 based basic invalidation with client reply off (42 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (2 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (1 ms) [ok]: client evicted due to watched key list (310 ms) [ok]: SORT adds integer field to list (0 ms) [ok]: no-writes shebang flag on replica (103 ms) [64/89 done]: unit/violations (1 seconds) Testing unit/replybufsize [ok]: not enough good replicas (1 ms) [ok]: Coverage: Basic CLIENT CACHING (0 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [65/89 done]: unit/tracking (2 seconds) Testing unit/cluster/misc [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (11 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (15869 ms) [ok]: WAITAOF local copy before fsync (94 ms) [ok]: not enough good replicas state change during long script (623 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (3 ms) [ok]: client evicted due to pubsub subscriptions (859 ms) [ok]: Consistent eval error reporting (8 ms) [ok]: LUA redis.error_reply API (0 ms) [ok]: verify reply buffer limits (649 ms) [ok]: LUA redis.error_reply API with empty string (1 ms) [ok]: LUA redis.status_reply API (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: client evicted due to tracking redirection (57 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [66/89 done]: unit/replybufsize (0 seconds) Testing unit/cluster/cli [67/89 done]: unit/scripting (12 seconds) Testing unit/cluster/scripting [ok]: query buffer resized correctly (2860 ms) [ok]: query buffer resized correctly when not idle (26 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (1 ms) [ok]: WAITAOF local copy everysec (601 ms) [ok]: WAITAOF local copy with appendfsync always (1 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: WAITAOF local if AOFRW was postponed (301 ms) [ok]: ziplist implementation: value encoding and backlink (12816 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: WAITAOF replica copy before fsync (82 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (3892 ms) [ok]: PSYNC2 #3899 regression: verify consistency (17 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: WAITAOF replica copy everysec (711 ms) [ok]: Key lazy expires during key migration (12 ms) [ok]: Coverage: Basic cluster commands (2 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (0 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [68/89 done]: integration/psync2-reg (23 seconds) Testing unit/cluster/hostnames [69/89 done]: unit/cluster/scripting (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: Create 3 node cluster (1919 ms) [ok]: Run blocking command on cluster node3 (0 ms) [ok]: Perform a Resharding (4 ms) [ok]: Verify command got unblocked after resharding (46 ms) [ok]: Wait for cluster to be stable (8 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (3 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (1 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1004 ms) [70/89 done]: unit/cluster/misc (3 seconds) Testing unit/cluster/multi-slot-operations [ok]: query buffer resized correctly with fat argv (2976 ms) [71/89 done]: unit/querybuf (6 seconds) Testing unit/cluster/slot-ownership [ok]: Kill a cluster node and wait for fail state (1717 ms) [ok]: Verify command got unblocked after cluster failure (7 ms) [ok]: Set cluster human announced nodename and let it propagate (103 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9422 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2010 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (102 ms) [ok]: WAITAOF replica copy appendfsync always (1 ms) [ok]: Set cluster hostnames and verify they are propagated (208 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (6 ms) [ok]: Update hostnames and make sure they are all eventually propagated (107 ms) [ok]: Continuous slots distribution (6 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (0 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (3 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (106 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (206 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (106 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [72/89 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/links [ok]: WAITAOF replica copy if replica is blocked (900 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5027 ms) [ok]: No response for single command if client output buffer hard limit is enforced (114 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 186974) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [73/89 done]: unit/cluster/slot-ownership (3 seconds) Testing unit/cluster/cluster-response-tls [74/89 done]: unit/cluster/cluster-response-tls (0 seconds) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1002 ms) [ok]: ziplist implementation: encoding stress testing (6057 ms) [75/89 done]: unit/type/list-3 (45 seconds) [ok]: AOF rewrite during write load: RDB preamble=no (29209 ms) [ok]: Turning off AOF kills the background writing child if any (104 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1047 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (14 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (16 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: AOF rewrite of list with listpack encoding, string data (102 ms) [ok]: Obuf limit, KEYS stopped mid-run (53 ms) [ok]: WAITAOF on promoted replica (702 ms) [76/89 done]: unit/obuf-limits (16 seconds) [ok]: AOF rewrite of list with quicklist encoding, string data (114 ms) [ok]: AOF rewrite of list with listpack encoding, int data (102 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (102 ms) [ok]: AOF rewrite of set with intset encoding, string data (103 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (2992 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (112 ms) [ok]: client evicted due to client tracking prefixes (7954 ms) [ok]: client evicted due to output buf (14 ms) [ok]: client no-evict on (25 ms) [ok]: AOF rewrite of set with intset encoding, int data (102 ms) [ok]: client no-evict off (29 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (102 ms) [ok]: Human nodenames are visible in log messages (3520 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (102 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (103 ms) [ok]: avoid client eviction when client is freed by output buffer limit (116 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [77/89 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: AOF rewrite of hash with hashtable encoding, string data (171 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (103 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (112 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (103 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (127 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (53 ms) [ok]: decrease maxmemory-clients causes client eviction (502 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (116 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3513 ms) [ok]: AOF rewrite functions (103 ms) [ok]: Test restart will keep hostname information (183 ms) [ok]: Test hostname validation (1 ms) [ok]: evict clients only until below limit (91 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (215 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: BGREWRITEAOF is refused if already in progress (13 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2002 ms) [78/89 done]: unit/aofrw (46 seconds) [ok]: evict clients in right order (large to small) (110 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (302 ms) [79/89 done]: unit/cluster/hostnames (7 seconds) [ok]: GEOSEARCH fuzzy test - byradius (17090 ms) [ok]: client total memory grows during client no-evict (135 ms) [ok]: client total memory grows during maxmemory-clients disabled (137 ms) [80/89 done]: unit/client-eviction (11 seconds) [ok]: Each node has two links with each peer (3 ms) [ok]: Validate cluster links format (0 ms) [ok]: WAITAOF master isn't configured to do AOF (1002 ms) [ok]: WAITAOF replica isn't configured to do AOF (102 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (902 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6294 ms) [ok]: Migrate the last slot away from a node using redis-cli (4229 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: WAITAOF master sends PING after last write (1201 ms) [ok]: WAITAOF master client didn't send any write command (1202 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 226257) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: redis-cli --cluster create with cluster-port (1920 ms) [ok]: WAITAOF master client didn't send any command (1201 ms) [ok]: redis-cli --cluster add-node with cluster-port (1135 ms) [81/89 done]: unit/cluster/cli (17 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (16145 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3327 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 284056) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 6 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (1 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7883 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2326 ms) [ok]: GEOSEARCH fuzzy test - bybox (12391 ms) [ok]: GEOSEARCH box edges fuzzy test (32 ms) [82/89 done]: unit/geo (30 seconds) [ok]: WAITAOF when replica switches between masters, fsync: always (1325 ms) [ok]: setup replication for following tests (102 ms) [ok]: Disconnect link when send buffer limit reached (12886 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (681 ms) [83/89 done]: unit/wait (28 seconds) [ok]: Link memory increases with publishes (685 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 347035) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: Bring the master back again for next test (1 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (143 ms) [ok]: Link memory resets after publish messages flush (515 ms) [84/89 done]: unit/cluster/links (19 seconds) [85/89 done]: integration/psync2 (46 seconds) [ok]: slave buffer are counted correctly (30641 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9432 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: replica buffer don't induce eviction (4632 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (151 ms) [ok]: client tracking don't cause eviction feedback loop (1275 ms) [ok]: propagation with eviction (95 ms) [ok]: propagation with eviction in MULTI (96 ms) [ok]: lru/lfu value of the key just added (1 ms) [86/89 done]: unit/maxmemory (45 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (17145 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (42476 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9447 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3476 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (44 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1673 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (669 ms) [ok]: PFADD / PFCOUNT cache invalidation works (0 ms) [87/89 done]: unit/hyperloglog (50 seconds) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6335 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (16562 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7896 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9465 ms) [ok]: Slave should be able to synchronize with the master (1815 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (19638 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (427 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (341 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (862 ms) [ok]: Busy script during async loading (882 ms) [ok]: Blocked commands and configs during async-loading (431 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 1022 to exit... [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9719 ms) Waiting for process 1022 to exit... Waiting for process 1022 to exit... [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (43 ms) Waiting for process 1022 to exit... [ok]: Slave should be able to synchronize with the master (1806 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6384 ms) [ok]: Slave should be able to synchronize with the master (803 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7913 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9432 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless loading short read (28814 ms) [ok]: diskless no replicas drop during rdb pipe (6456 ms) [ok]: diskless slow replicas drop during rdb pipe (2599 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10685 ms) [88/89 done]: integration/replication-psync (153 seconds) [ok]: diskless fast replicas drop during rdb pipe (5656 ms) [ok]: diskless all replicas drop during rdb pipe (1505 ms) [ok]: diskless timeout replicas drop during rdb pipe (5232 ms) [ok]: diskless replication child being killed is collected (1451 ms) [ok]: replication child dies when parent is killed - diskless: yes (1148 ms) [ok]: replication child dies when parent is killed - diskless: no (1347 ms) [ok]: diskless replication read pipe cleanup (874 ms) [ok]: replicaof right after disconnection (1818 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (921 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync (103 ms) [ok]: replica can handle EINTR if use diskless load (638 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (95 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (146 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (104 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (54 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (111 ms) [89/89 done]: integration/replication (178 seconds) Testing solo test [89/89 done]: list-large-memory (0 seconds) Testing solo test [89/89 done]: set-large-memory (1 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [89/89 done]: bitops-large-memory (0 seconds) Testing solo test [89/89 done]: defrag (0 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [89/89 done]: violations (1 seconds) The End Execution time of different units: 0 seconds - unit/info-command 0 seconds - unit/printver 0 seconds - unit/type/incr 0 seconds - unit/protocol 1 seconds - unit/keyspace 1 seconds - unit/auth 2 seconds - unit/info 0 seconds - unit/quit 3 seconds - unit/type/hash 4 seconds - unit/type/stream-cgroups 0 seconds - unit/acl-v2 2 seconds - unit/acl 5 seconds - unit/sort 6 seconds - unit/scan 5 seconds - unit/multi 7 seconds - unit/type/string 7 seconds - unit/other 11 seconds - unit/type/list-2 11 seconds - unit/type/set 12 seconds - unit/type/list 8 seconds - unit/latency-monitor 0 seconds - integration/aof-race 13 seconds - unit/expire 8 seconds - integration/replication-2 16 seconds - unit/type/zset 10 seconds - integration/replication-3 1 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 0 seconds - integration/logging 7 seconds - integration/shutdown 6 seconds - integration/rdb 20 seconds - unit/type/stream 11 seconds - integration/replication-buffer 22 seconds - unit/dump 11 seconds - integration/aof-multi-part 11 seconds - integration/aof 1 seconds - integration/redis-benchmark 0 seconds - unit/pubsub 2 seconds - unit/pubsubshard 3 seconds - integration/dismiss-mem 6 seconds - integration/psync2-master-restart 5 seconds - integration/failover 1 seconds - unit/slowlog 14 seconds - integration/corrupt-dump 22 seconds - integration/replication-4 8 seconds - integration/redis-cli 4 seconds - unit/functions 1 seconds - unit/limits 26 seconds - integration/block-repl 1 seconds - unit/bitfield 2 seconds - unit/bitops 7 seconds - unit/introspection 3 seconds - unit/memefficiency 1 seconds - unit/lazyfree 20 seconds - integration/corrupt-dump-fuzzer 8 seconds - unit/introspection-2 1 seconds - unit/pause 17 seconds - integration/psync2-pingoff 0 seconds - unit/tls 0 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 1 seconds - unit/networking 1 seconds - unit/violations 2 seconds - unit/tracking 0 seconds - unit/replybufsize 12 seconds - unit/scripting 23 seconds - integration/psync2-reg 3 seconds - unit/cluster/scripting 3 seconds - unit/cluster/misc 6 seconds - unit/querybuf 3 seconds - unit/cluster/multi-slot-operations 3 seconds - unit/cluster/slot-ownership 0 seconds - unit/cluster/cluster-response-tls 45 seconds - unit/type/list-3 16 seconds - unit/obuf-limits 6 seconds - unit/cluster/human-announced-nodename 46 seconds - unit/aofrw 7 seconds - unit/cluster/hostnames 11 seconds - unit/client-eviction 17 seconds - unit/cluster/cli 30 seconds - unit/geo 28 seconds - unit/wait 19 seconds - unit/cluster/links 46 seconds - integration/psync2 45 seconds - unit/maxmemory 50 seconds - unit/hyperloglog 153 seconds - integration/replication-psync 178 seconds - integration/replication 0 seconds - list-large-memory 1 seconds - set-large-memory 0 seconds - bitops-large-memory 0 seconds - defrag 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.4/src' >>> redis-openrc*: Running split function openrc... >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.4-r1.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 28.0 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.4-r1.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-armhf.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 >>> redis*: Package size: 3.3 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.4-r1.apk >>> redis: Build complete at Wed, 01 May 2024 08:10:45 +0000 elapsed time 0h 3m 20s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20240501.080725) (2/8) Purging linux-headers (6.6-r0) (3/8) Purging openssl-dev (3.3.0-r1) (4/8) Purging tcl (8.6.14-r0) (5/8) Purging tzdata (2024a-r1) (6/8) Purging procps-ng (4.0.4-r0) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r0) Executing busybox-1.36.1-r26.trigger OK: 315 MiB in 103 packages >>> redis: Updating the community/armhf repository index... >>> redis: Signing the index...