>>> redis: Building community/redis 7.2.9-r0 (using abuild 3.13.0-r3) started Fri, 30 May 2025 00:25:42 +0000 >>> redis: Checking sanity of /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r0) (2/8) Installing openssl-dev (3.3.3-r0) (3/8) Installing tzdata (2025b-r0) (4/8) Installing tcl (8.6.14-r1) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r0) (7/8) Installing procps-ng (4.0.4-r0) (8/8) Installing .makedepends-redis (20250530.002543) Executing busybox-1.36.1-r29.trigger OK: 287 MiB in 111 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redis-7.2.9.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redis-7.2.9.tar.gz >>> redis: Checking sha512sums... redis-7.2.9.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK >>> redis: Unpacking /var/cache/distfiles/v3.20/redis-7.2.9.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise cd linenoise && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hiredis' make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c MAKE fpconv cd fpconv && make gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/fpconv' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/linenoise' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hdr_histogram' ar rcs libhiredis_ssl.a ssl.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ranlib liblua.a make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/hiredis' gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o redis-check-aof.c: In function 'processAnnotations': redis-check-aof.c:194:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 194 | printf("AOF %s has nothing before timestamp %ld, " | ~~^ | | | long int | %lld 195 | "aborting...\n", filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:199:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 199 | printf("Failed to truncate AOF %s to timestamp %ld to offset %ld because it is not the last file.\n", | ~~^ | | | long int | %lld 200 | filename, to_timestamp, (long int)epos); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c:207:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 207 | printf("Failed to truncate AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 208 | filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} redis-check-aof.c: In function 'checkSingleAof': redis-check-aof.c:295:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 295 | printf("Truncate nothing in AOF %s to timestamp %ld\n", aof_filename, to_timestamp); | ~~^ ~~~~~~~~~~~~ | | | | long int time_t {aka long long int} | %lld redis-check-aof.c: In function 'printAofStyle': redis-check-aof.c:446:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 446 | printf("Successfully truncated AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 447 | aofFileName, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o LINK redis-benchmark LINK redis-cli LINK redis-server INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 32790 Testing unit/printver [ready]: 32789 Testing unit/dump [ready]: 32791 Testing unit/auth [ready]: 32792 Testing unit/protocol [ready]: 32793 Testing unit/keyspace [ready]: 32794 Testing unit/scan [ready]: 32795 Testing unit/info [ready]: 32796 Testing unit/info-command [ready]: 32797 Testing unit/type/string [ready]: 32798 Testing unit/type/incr [ready]: 32799 Testing unit/type/list [ready]: 32800 Testing unit/type/list-2 [ready]: 32802 Testing unit/type/list-3 [ready]: 32801 Testing unit/type/set [ready]: 32803 Testing unit/type/zset [ready]: 32804 Testing unit/type/hash Testing Redis version 7.2.9 (00000000) [ok]: SET and GET an item (13 ms) [ok]: SET and GET an empty item (13 ms) [ok]: info command with at most one sub command (26 ms) [ok]: Handle an empty query (52 ms) [ok]: info command with one sub-section (13 ms) [ok]: HSET/HLEN - Small hash creation (59 ms) [ok]: Is the small hash encoded with a listpack? (7 ms) [ok]: info command with multiple sub-sections (14 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (69 ms) [ok]: Negative multibulk length (53 ms) [1/92 done]: unit/printver (0 seconds) Testing unit/type/stream [ok]: Out of range multibulk length (13 ms) [ok]: INCR against non existing key (0 ms) [ok]: Wrong multibulk payload header (8 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: DECR against key created by incr (1 ms) [ok]: Negative multibulk payload length (8 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: DEL against a single item (29 ms) [ok]: INCR over 32bit value (4 ms) [ok]: Out of range multibulk payload length (14 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: Non-number multibulk payload length (9 ms) [ok]: AUTH fails if there is no password configured server side (23 ms) [ok]: INCR fails against key with spaces (right) (3 ms) [ok]: Multi bulk request not followed by bulk arguments (6 ms) [ok]: Check encoding - listpack (16 ms) [ok]: INCR fails against key with spaces (both) (4 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: Generic wrong number of args (7 ms) [ok]: Explicit regression for a list bug (30 ms) [ok]: Arity check for auth command (13 ms) [ok]: Vararg DEL (27 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (49 ms) [ok]: Very big payload in GET/SET (127 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: Unbalanced number of quotes (7 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (5 ms) [ok]: DECRBY against key is not exist (11 ms) [ok]: Untagged multi-key commands (20 ms) [ok]: INCR uses shared objects in the 0-9999 range (30 ms) [ok]: INCR can modify objects in-place (27 ms) [ok]: ZSET basic ZADD and score update - listpack (40 ms) [ok]: reg node check compression with insert and pop (93 ms) [ok]: INCRBYFLOAT against non existing key (6 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (34 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (3 ms) [ok]: INCRBYFLOAT against key originally set with SET (8 ms) [2/92 done]: unit/info-command (0 seconds) Testing unit/type/stream-cgroups [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (9 ms) [ok]: INCRBYFLOAT over 32bit value (6 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (6 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (14 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (6 ms) [ok]: Protocol desync regression test #1 (55 ms) [ok]: KEYS with pattern (40 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (2 ms) [ok]: KEYS to get all keys (7 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (33 ms) [ok]: reg node check compression combined with trim (40 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (8 ms) [ok]: ZADD XX option without key - listpack (16 ms) [ok]: DBSIZE (6 ms) [ok]: INCRBYFLOAT fails against a key holding a list (12 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (6 ms) [ok]: INCRBYFLOAT decrement (5 ms) [ok]: ZADD XX existing key - listpack (27 ms) [ok]: string to double with null terminator (9 ms) [ok]: reg node check compression with lset (33 ms) [ok]: RESTORE can set an absolute expire (37 ms) [ok]: Protocol desync regression test #2 (50 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (13 ms) [ok]: No negative zero (14 ms) [ok]: DEL all keys (46 ms) [ok]: latencystats: disable/enable (32 ms) [ok]: XADD wrong number of args (11 ms) [ok]: RESTORE with ABSTTL in the past (36 ms) [ok]: ZADD XX updates existing elements score - listpack (34 ms) [ok]: Protocol desync regression test #3 (38 ms) [ok]: incr operation should update encoding from raw to int (40 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (26 ms) [ok]: raw protocol response (5 ms) [ok]: XADD IDs are incremental (19 ms) [ok]: latencystats: configure percentiles (58 ms) [ok]: raw protocol response - deferred (7 ms) [ok]: decr operation should update encoding from raw to int (33 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (43 ms) [ok]: raw protocol response - multiline (10 ms) [ok]: RESTORE can set LRU (54 ms) [ok]: Regression for quicklist #3343 bug (193 ms) [ok]: latencystats: bad configure percentiles (34 ms) [ok]: XADD IDs are incremental when ms is the same as well (34 ms) [ok]: RESP3 attributes (20 ms) [ok]: XADD IDs correctly report an error when overflowing (13 ms) [ok]: plain node check compression (127 ms) [ok]: incrby operation should update encoding from raw to int (44 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (43 ms) [ok]: RESP3 attributes readraw (20 ms) [ok]: RESTORE can set LFU (46 ms) [ok]: XADD auto-generated sequence is incremented for last ID (17 ms) [ok]: RESTORE returns an error of the key already exists (7 ms) [ok]: RESP3 attributes on RESP2 (13 ms) [ok]: test big number parsing (13 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (20 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (19 ms) [ok]: latencystats: blocking commands (55 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (47 ms) [ok]: plain node check compression with ltrim (53 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (20 ms) [ok]: decrby operation should update encoding from raw to int (53 ms) [ok]: AUTH fails when a wrong password is given (10 ms) [ok]: test bool parsing (30 ms) [ok]: XADD auto-generated sequence can't overflow (16 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (50 ms) [ok]: test verbatim str parsing (6 ms) [ok]: Arbitrary command gives an error when AUTH is required (10 ms) [ok]: latencystats: subcommands (34 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (40 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (7 ms) [ok]: Check compression with recompress (120 ms) [ok]: AUTH succeeds when the right password is given (3 ms) [ok]: XADD 0-* should succeed (14 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (13 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (20 ms) [ok]: plain node check compression using lset (47 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (14 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (57 ms) [ok]: ZADD XX and NX are not compatible - listpack (6 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (17 ms) [ok]: XREADGROUP will return only new elements (16 ms) [ok]: test large number of args (50 ms) [ok]: ZADD NX with non existing key - listpack (24 ms) [ok]: XREADGROUP can read the history of the elements we own (34 ms) [ok]: test argument rewriting - issue 9598 (40 ms) [ok]: latencystats: measure latency (86 ms) [ok]: XPENDING is able to return pending items (6 ms) [ok]: XPENDING can return single consumer items (7 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (43 ms) [ok]: XPENDING only group (7 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (113 ms) [ok]: DUMP of non existing key returns nil (7 ms) [ok]: ZADD GT and NX are not compatible - listpack (11 ms) [ok]: ZADD LT and NX are not compatible - listpack (13 ms) [ok]: errorstats: failed call authentication error (48 ms) [ok]: ZADD LT and GT are not compatible - listpack (10 ms) [3/92 done]: unit/type/incr (1 seconds) Testing unit/sort [ok]: XPENDING with IDLE (50 ms) [ok]: XPENDING with exclusive range intervals works as expected (13 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (33 ms) [ok]: For unauthenticated clients output buffer is limited (140 ms) [ok]: XACK is able to remove items from the consumer/group PEL (23 ms) [ok]: XACK can't remove the same item multiple times (7 ms) [ok]: XACK is able to accept multiple arguments (3 ms) [ok]: HRANDFIELD - listpack (570 ms) [ok]: errorstats: failed call within MULTI/EXEC (87 ms) [ok]: XACK should fail if got at least one invalid ID (40 ms) [ok]: ZADD INCR LT/GT with inf - listpack (85 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (20 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (51 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (14 ms) [ok]: Crash due to wrongly recompress after lrem (294 ms) [ok]: errorstats: failed call within LUA (85 ms) [ok]: MIGRATE is caching connections (193 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (23 ms) [ok]: Test LPUSH and LPOP on plain nodes (100 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (718 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (6 ms) [ok]: ZADD - Variadic version base case - listpack (10 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (53 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (10 ms) [ok]: Regression for a crash with blocking ops and pipelining (16 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (14 ms) [ok]: errorstats: failed call NOSCRIPT error (59 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (10 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (32 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (3 ms) [ok]: Test LINDEX and LINSERT on plain nodes (66 ms) [ok]: ZCARD basics - listpack (17 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (76 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (110 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (16 ms) [ok]: ZREM removes key after last element is removed - listpack (36 ms) [ok]: Test LTRIM on plain nodes (40 ms) [ok]: errorstats: failed call NOGROUP error (66 ms) [ok]: SCAN basic (819 ms) [ok]: errorstats: rejected call unknown command (2 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (27 ms) [4/92 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: ZREM variadic version - listpack (23 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (78 ms) [ok]: errorstats: rejected call within MULTI/EXEC (3 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (3 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: SMISMEMBER requires one or more members (17 ms) [ok]: ZRANGE basics - listpack (4 ms) [ok]: errorstats: rejected call by OOM error (2 ms) [ok]: SADD against non set (13 ms) [ok]: AUTH fails when binary password is wrong (10 ms) [ok]: Blocking XREADGROUP: key deleted (27 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: Test LREM on plain nodes (57 ms) [ok]: errorstats: blocking commands (2 ms) [ok]: AUTH succeeds when binary password is correct (10 ms) [ok]: SADD a non-integer against a small intset (37 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (100 ms) [ok]: Blocking XREADGROUP: key type changed with SET (39 ms) [ok]: ZREVRANGE basics - listpack (63 ms) [ok]: Test LPOS on plain nodes (47 ms) [ok]: stats: eventloop metrics (114 ms) [ok]: Listpack: SORT BY key (7 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (54 ms) [ok]: Listpack: SORT BY key with limit (6 ms) [ok]: EXPIRE - set timeouts multiple times (40 ms) [ok]: ZRANK/ZREVRANK basics - listpack (70 ms) [ok]: Listpack: SORT BY hash field (7 ms) [ok]: Blocking XREADGROUP: flushed DB (23 ms) [ok]: EXPIRE - It should be still possible to read 'x' (6 ms) [ok]: ZRANK - after deletion - listpack (16 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (13 ms) [ok]: Test LMOVE on plain nodes (93 ms) [ok]: ZINCRBY - increment and decrement - listpack (36 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (63 ms) [ok]: ZINCRBY return value - listpack (7 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (60 ms) [ok]: XREAD and XREADGROUP against wrong parameter (20 ms) [ok]: HRANDFIELD - hashtable (497 ms) [ok]: Test LSET with packed / plain combinations (133 ms) [ok]: Blocking XREAD: key deleted (34 ms) [ok]: HRANDFIELD with RESP3 (27 ms) [ok]: HRANDFIELD count of 0 is handled correctly (7 ms) [ok]: HRANDFIELD count overflow (26 ms) [ok]: Blocking XREAD: key type changed with SET (43 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (150 ms) [ok]: HRANDFIELD with against non existing key (4 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (33 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (6 ms) [ok]: Test LSET with packed is split in the middle (109 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (60 ms) [ok]: DEL against expired key (1120 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (127 ms) [ok]: EXISTS (20 ms) [ok]: Zero length value in key. SET/GET/EXISTS (23 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (70 ms) [ok]: Commands pipelining (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (24 ms) [ok]: SCAN COUNT (565 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (1 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (0 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (110 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (60 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (0 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (30 ms) [ok]: Test LSET with packed consist only one item (277 ms) [ok]: COPY basic usage for string (1 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (0 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (190 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: Crash due to delete entry from a compress quicklist node (53 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: COPY basic usage for list - quicklist (48 ms) [ok]: COPY basic usage for list - listpack (1 ms) [ok]: SADD a non-integer against a large intset (706 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: Crash due to split quicklist node wrongly (34 ms) [ok]: SADD an integer larger than 64 bits (17 ms) [ok]: COPY basic usage for $type set (16 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (22 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: COPY basic usage for hashtable hash (17 ms) [ok]: SCAN MATCH (275 ms) [ok]: COPY basic usage for stream (115 ms) [ok]: ZLEXCOUNT advanced - listpack (140 ms) [ok]: COPY basic usage for stream-cgroups (133 ms) [ok]: MOVE basic usage (30 ms) [ok]: MOVE against key existing in the target DB (10 ms) [ok]: MOVE against non-integer DB (#1428) (10 ms) [ok]: SCAN TYPE (123 ms) [ok]: SADD an integer larger than 64 bits to a large intset (188 ms) [ok]: MOVE can move key expire metadata as well (40 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (33 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (126 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (9 ms) [ok]: HRANDFIELD with - hashtable (634 ms) [ok]: MOVE does not create an expire if it does not exist (40 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (34 ms) [ok]: SCAN unknown type (94 ms) [ok]: LPOS basic usage - quicklist (69 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (50 ms) [ok]: SET/GET keys in different DBs (43 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (47 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (45 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: HRANDFIELD with - listpack (99 ms) [ok]: Variadic SADD (1 ms) [ok]: LPOS COUNT option (23 ms) [ok]: LPOS COUNT + RANK option (13 ms) [ok]: SCAN with expired keys (97 ms) [ok]: LPOS non existing key (7 ms) [ok]: LPOS no match (13 ms) [ok]: MASTERAUTH test with binary password (943 ms) [ok]: LPOS MAXLEN (34 ms) [ok]: HSET/HLEN - Big hash creation (86 ms) [ok]: LPOS when RANK is greater than matches (20 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (1 ms) [ok]: SCAN with expired keys with TYPE filter (96 ms) [ok]: SSCAN with encoding intset (1 ms) [ok]: Set encoding after DEBUG RELOAD (132 ms) [ok]: SSCAN with encoding listpack (2 ms) [ok]: SREM basics - $type (1 ms) [ok]: SSCAN with encoding hashtable (3 ms) [ok]: HSCAN with encoding listpack (2 ms) [ok]: SREM basics - $type (12 ms) [ok]: HGET against the big hash (63 ms) [ok]: SREM basics - intset (1 ms) [ok]: HGET against non existing key (0 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: HSET in update and insert mode (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: HSCAN with encoding hashtable (68 ms) [ok]: ZSCAN with encoding listpack (5 ms) [ok]: HMSET - big hash (55 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (2 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (34 ms) [ok]: HMGET - small hash (0 ms) [5/92 done]: unit/auth (2 seconds) Testing unit/other [ok]: SUNION with two sets - regular (16 ms) [ok]: SUNIONSTORE with two sets - regular (27 ms) [ok]: HMGET - big hash (55 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: HKEYS - small hash (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (180 ms) [ok]: HKEYS - big hash (12 ms) [ok]: SINTERCARD against three sets - regular (19 ms) [ok]: ZSCAN with encoding skiplist (76 ms) [ok]: LPOP/RPOP with wrong number of arguments (10 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (2 ms) [ok]: SINTERSTORE with three sets - regular (11 ms) [ok]: HGETALL - small hash (1 ms) [ok]: SCAN guarantees check under write load (23 ms) [ok]: RANDOMKEY (347 ms) [ok]: SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: RANDOMKEY against empty DB (10 ms) [ok]: SUNION with non existing keys - regular (20 ms) [ok]: HGETALL - big hash (26 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (1 ms) [ok]: HDEL and return value (1 ms) [ok]: HSCAN with PATTERN (0 ms) [ok]: SDIFFSTORE with three sets - regular (9 ms) [ok]: RANDOMKEY regression 1 (13 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (13 ms) [ok]: HEXISTS (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (17 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: Regression for pattern matching long nested loops (13 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (66 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: LPOS basic usage - listpack (14 ms) [ok]: HINCRBY against hash key originally set with HSET (1 ms) [ok]: Regression for pattern matching very long nested loops (20 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: Coverage: HELP commands (60 ms) [ok]: HINCRBY fails against hash value with spaces (left) (1 ms) [ok]: Coverage: MEMORY MALLOC-STATS (7 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (23 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: Coverage: MEMORY PURGE (7 ms) [ok]: XADD with MAXLEN option (1951 ms) [ok]: HINCRBY can detect overflows (1 ms) [ok]: LPOS COUNT option (13 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: LPOS COUNT + RANK option (7 ms) [ok]: LPOS non existing key (3 ms) [ok]: HINCRBYFLOAT against non existing hash key (4 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: LPOS no match (7 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: LPOS MAXLEN (17 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: LPOS when RANK is greater than matches (10 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: SAVE - make sure there are all the types as values (86 ms) [ok]: HSTRLEN against the big hash (72 ms) [ok]: HSTRLEN against non existing field (0 ms) [6/92 done]: unit/keyspace (3 seconds) Testing unit/multi [ok]: HSTRLEN corner cases (6 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (2 ms) [ok]: XADD with MAXLEN option and the '=' argument (106 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: Hash fuzzing #1 - 10 fields (27 ms) [ok]: Hash fuzzing #2 - 10 fields (15 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (80 ms) [ok]: LPOP/RPOP with wrong number of arguments (6 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (24 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (10 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (10 ms) [ok]: XADD with MAXLEN option and the '~' argument (79 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (17 ms) [ok]: stats: instantaneous metrics (1613 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (10 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (10 ms) [ok]: MULTI / EXEC basics (50 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (17 ms) [ok]: Variadic RPUSH/LPUSH (13 ms) [ok]: DEL a list (13 ms) [ok]: XADD with MINID option (91 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1106 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: DISCARD (53 ms) [ok]: Nested MULTI are not allowed (20 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (780 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (20 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (43 ms) [ok]: MULTI where commands alter argc/argv (30 ms) [ok]: stats: debug metrics (133 ms) [ok]: WATCH inside MULTI is not allowed (20 ms) [ok]: BLPOP: single existing list - quicklist (87 ms) [ok]: RENAME can unblock XREADGROUP with data (43 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (40 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (53 ms) [ok]: ZSCAN scores: regression test for issue #2175 (556 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (63 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (27 ms) [ok]: BLPOP: multiple existing lists - quicklist (149 ms) [ok]: EXEC works on WATCHed key not modified (17 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (20 ms) [7/92 done]: unit/info (3 seconds) Testing unit/quit [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (20 ms) [ok]: BLPOP: second list has an entry - quicklist (64 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (23 ms) [ok]: QUIT returns OK (13 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (74 ms) [ok]: Pipelined commands after QUIT must not be executed (27 ms) [ok]: ZREMRANGEBYRANK basics - listpack (356 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (27 ms) [ok]: EXEC fail on lazy expired WATCHed key (133 ms) [ok]: WATCH stale keys should not fail EXEC (27 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2114 ms) [ok]: EXPIRE - write on expire should work (20 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (27 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (146 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (26 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (30 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (6 ms) [ok]: SETEX - Check value (7 ms) [ok]: SETEX - Overwrite old key (3 ms) [8/92 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: After successful EXEC key is no longer watched (29 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (61 ms) [ok]: After failed EXEC key is no longer watched (33 ms) [ok]: Very big payload random access (3122 ms) [ok]: It is possible to UNWATCH (23 ms) [ok]: UNWATCH when there is nothing watched works as expected (4 ms) [ok]: BRPOPLPUSH - quicklist (50 ms) [ok]: FLUSHALL is able to touch the watched keys (33 ms) [ok]: Quicklist: SORT BY key (9 ms) [ok]: Quicklist: SORT BY key with limit (2 ms) [ok]: Quicklist: SORT BY hash field (9 ms) [ok]: BLMOVE left left - quicklist (46 ms) [ok]: FLUSHALL does not touch non affected keys (33 ms) [ok]: FLUSHDB is able to touch the watched keys (30 ms) [ok]: BLMOVE left right - quicklist (49 ms) [ok]: FLUSHDB does not touch non affected keys (23 ms) [ok]: ZREMRANGEBYLEX basics - listpack (346 ms) [ok]: SWAPDB is able to touch the watched keys that exist (26 ms) [ok]: BLMOVE right left - quicklist (50 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (1 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (28 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: BLMOVE right right - quicklist (48 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: SWAPDB does not touch watched stale keys (33 ms) [ok]: XCLAIM can claim PEL items from another consumer (707 ms) [ok]: BLPOP: multiple existing lists - listpack (29 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (2 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (0 ms) [ok]: BRPOPLPUSH - listpack (1 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (37 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (9 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (0 ms) [ok]: BLPOP with variadic LPUSH (0 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (5 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (0 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [ok]: BLMPOP with multiple blocked clients (6 ms) [ok]: Linked LMOVEs (1 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (0 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (43 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: Hash fuzzing #1 - 512 fields (1160 ms) [ok]: WATCH is able to remember the DB a key belongs to (33 ms) [ok]: WATCH will consider touched keys target of EXPIRE (24 ms) [ok]: FUZZ stresser with data model binary (1334 ms) [ok]: XCLAIM without JUSTID increments delivery count (433 ms) [ok]: XCLAIM same consumer (227 ms) [ok]: FUZZ stresser with data model alpha (469 ms) [ok]: SETEX - Wait for the key to expire (1106 ms) [ok]: SETEX - Wrong time parameter (6 ms) [ok]: Hash fuzzing #2 - 512 fields (726 ms) [ok]: PERSIST can undo an EXPIRE (24 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (13 ms) [ok]: XADD mass insertion and XLEN (1690 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1200 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: BRPOPLPUSH timeout (1022 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: XRANGE can be used to iterate the whole stream (311 ms) [ok]: WATCH will consider touched expired keys (1046 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (0 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: FUZZ stresser with data model compr (433 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (179 ms) [ok]: MULTI / EXEC is not propagated (single write command) (97 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (623 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (20 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (20 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (102 ms) [ok]: Generated sets must be encoded correctly - intset (27 ms) [ok]: XAUTOCLAIM as an iterator (204 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (2 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XINFO FULL output (3 ms) [ok]: SINTER with two sets - intset (6 ms) [ok]: SINTERCARD with two sets - intset (27 ms) [ok]: SINTERSTORE with two sets - intset (23 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (102 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (41 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (313 ms) [ok]: SUNION with two sets - intset (23 ms) [ok]: SUNIONSTORE with two sets - intset (8 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (18 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (1 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (107 ms) [ok]: Consumer seen-time and active-time (210 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (943 ms) [ok]: BGSAVE (167 ms) [ok]: SELECT an out of range DB (3 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (104 ms) [ok]: Hash ziplist of various encodings (96 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: MULTI / EXEC with REPLICAOF (103 ms) [ok]: DISCARD should not fail during OOM (2 ms) [ok]: EXPIRE precision is now the millisecond (1130 ms) [9/92 done]: unit/type/hash (6 seconds) Testing unit/acl [ok]: XREADGROUP with NOACK creates consumer (97 ms) [ok]: PSETEX can set sub-second expires (124 ms) [ok]: Connections start with the default user (7 ms) [ok]: It is possible to create new users (4 ms) [ok]: Coverage: ACL USERS (2 ms) [ok]: Usernames can not contain spaces or null characters (4 ms) [ok]: New users start disabled (11 ms) [ok]: Enabling the user allows the login (15 ms) [ok]: Only the set of correct passwords work (22 ms) [ok]: It is possible to remove passwords from the set of valid ones (13 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (197 ms) [ok]: Test password hashes can be added (13 ms) [ok]: PEXPIRE can set sub-second expires (129 ms) [ok]: Test password hashes validate input (14 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (7 ms) [ok]: Test hashed passwords removal (13 ms) [ok]: By default users are not able to access any command (7 ms) [ok]: By default users are not able to access any key (13 ms) [ok]: MULTI and script timeout (403 ms) [ok]: It's possible to allow the access of a subset of keys (33 ms) [ok]: By default, only default user is able to publish to any channel (24 ms) [ok]: By default, only default user is not able to publish to any shard channel (26 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (4 ms) [ok]: Consumer group lag with XDELs (6 ms) [ok]: Consumer Group Lag with XDELs and tombstone after the last_id of consume group (7 ms) [ok]: Consumer group lag with XTRIM (3 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: By default, only default user is able to subscribe to any channel (38 ms) [ok]: By default, only default user is able to subscribe to any shard channel (36 ms) [ok]: Big Quicklist: SORT BY key (444 ms) [ok]: Big Quicklist: SORT BY key with limit (13 ms) [ok]: PEXPIREAT can set sub-second expires (237 ms) [ok]: By default, only default user is able to subscribe to any pattern (36 ms) [ok]: It's possible to allow publishing to a subset of channels (20 ms) [ok]: TTL returns time to live in seconds (20 ms) [ok]: PTTL returns time to live in milliseconds (17 ms) [ok]: It's possible to allow publishing to a subset of shard channels (23 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (33 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (30 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (33 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (20 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (64 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (19 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1040 ms) [ok]: It's possible to allow subscribing to a subset of channels (30 ms) [ok]: BLPOP when new key is moved into place (8 ms) [ok]: BLPOP when result key is created by SORT..STORE (0 ms) [ok]: BLMPOP_LEFT when new key is moved into place (0 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (2 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (30 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (24 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (26 ms) [ok]: EXEC and script timeout (403 ms) [ok]: Subscribers are killed when revoked of channel permission (37 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (164 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1587 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: Subscribers are killed when revoked of channel permission (44 ms) [ok]: Subscribers are killed when revoked of pattern permission (39 ms) [ok]: Subscribers are killed when revoked of allchannels permission (47 ms) [ok]: Big Quicklist: SORT BY hash field (434 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (1 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (159 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (70 ms) [ok]: blocked command gets rejected when reprocessed after permission change (54 ms) [ok]: Users can be configured to authenticate with any password (13 ms) [ok]: ACLs can exclude single commands (16 ms) [ok]: ACLs can include or exclude whole classes of commands (40 ms) [ok]: ACLs can include single subcommands (31 ms) [ok]: Hash table: SORT BY key (10 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: MULTI-EXEC body and script timeout (404 ms) [ok]: ACLs can exclude single subcommands, case 1 (29 ms) [ok]: Hash table: SORT BY hash field (19 ms) [ok]: ACLs can exclude single subcommands, case 2 (24 ms) [ok]: ACLs cannot include a subcommand with a specific arg (13 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (20 ms) [ok]: ACLs cannot exclude or include a container command with two args (20 ms) [ok]: ACLs including of a type includes also subcommands (27 ms) [ok]: ACLs can block SELECT of all but a specific DB (26 ms) [ok]: ZDIFF fuzzing - listpack (3318 ms) [ok]: ACLs can block all DEBUG subcommands except one (37 ms) [ok]: Redis should actively expire keys incrementally (677 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (2 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (1 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (1 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (1 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (1 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (2 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (7 ms) [ok]: ACLs set can include subcommands, if already full command exists (60 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (3 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (9 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (0 ms) [ok]: ZUNIONSTORE with weights - skiplist (1 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (1 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - skiplist (1 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (224 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (110 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (33 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (126 ms) [ok]: ACL GETUSER is able to translate back command permissions (29 ms) [ok]: just EXEC and script timeout (427 ms) [ok]: exec with write commands and state change (50 ms) [ok]: SETNX against expired volatile key (2646 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: XREAD with non empty second stream (904 ms) [ok]: GETEX no option (0 ms) [ok]: Blocking XREAD waiting new data (2 ms) [ok]: GETEX syntax errors (0 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: GETEX and GET expired key or not exist (4 ms) [ok]: GETEX no arguments (0 ms) [ok]: exec with read commands and stale replica state change (107 ms) [ok]: GETDEL command (0 ms) [ok]: GETDEL propagate as DEL command to replica (111 ms) [ok]: EXEC with only read commands should not be rejected when OOM (53 ms) [ok]: BLPOP: timeout (1087 ms) [ok]: Blocking XREAD will not reply with an empty array (113 ms) [ok]: EXEC with at least one use-memory command should fail (47 ms) [ok]: BLPOP: arguments are empty (40 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (117 ms) [ok]: BRPOP: with single empty list argument (23 ms) [ok]: BRPOP: with negative timeout (7 ms) [ok]: BRPOP: with non-integer timeout (13 ms) [ok]: GETEX without argument does not propagate to replica (103 ms) [ok]: MGET (9 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (1 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (3 ms) [ok]: BRPOP: with zero timeout should block indefinitely (17 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (1 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (1 ms) [ok]: SETBIT against integer-encoded key (0 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (0 ms) [ok]: Blocking commands ignores the timeout (67 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (101 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (5 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (43 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: BRPOP: second argument is not a list (13 ms) [ok]: XREAD + multiple XADD inside transaction (10 ms) [ok]: XDEL basic test (2 ms) [ok]: XDEL multiply id test (1 ms) [ok]: MULTI propagation of PUBLISH (103 ms) [ok]: ACL GETUSER provides reasonable results (540 ms) [10/92 done]: unit/type/stream-cgroups (8 seconds) Testing unit/acl-v2 [ok]: MULTI propagation of SCRIPT LOAD (113 ms) [ok]: MULTI propagation of EVAL (84 ms) [ok]: ACL GETUSER provides correct results (174 ms) [ok]: Test basic multiple selectors (72 ms) [ok]: ACL CAT with illegal arguments (13 ms) [ok]: ACL CAT without category - list all categories (7 ms) [ok]: Test ACL selectors by default have no permissions (13 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (26 ms) [ok]: Test deleting selectors (27 ms) [ok]: MULTI propagation of SCRIPT FLUSH (123 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (26 ms) [ok]: Redis should lazy expire keys (1030 ms) [ok]: Test selector syntax error reports the error in the selector context (36 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (20 ms) [ok]: SETBIT fuzzing (487 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (0 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: Test flexible selector definition (40 ms) [ok]: Test separate read permission (47 ms) [ok]: MULTI propagation of XREADGROUP (126 ms) [ok]: Test separate write permission (40 ms) [ok]: MULTI with SAVE (40 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (150 ms) [ok]: Test separate read and write permissions (40 ms) [ok]: MULTI with SHUTDOWN (40 ms) [ok]: Validate read and write permissions format - empty permission (7 ms) [ok]: Validate read and write permissions format - empty selector (6 ms) [ok]: Validate read and write permissions format - empty pattern (20 ms) [ok]: ACL LOG shows failed command executions at toplevel (53 ms) [ok]: Validate read and write permissions format - no pattern (20 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (46 ms) [ok]: SDIFF fuzzing (2951 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: ACL LOG is able to test similar events (43 ms) [ok]: Test separate read and write permissions on different selectors are not additive (80 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (6 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: SRANDMEMBER - intset (6 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (2 ms) [ok]: SPOP with - intset (3 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (3 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (2 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (27 ms) [ok]: SPOP new implementation: code path #3 intset (2 ms) [ok]: SPOP new implementation: code path #1 listpack (2 ms) [ok]: SPOP new implementation: code path #2 listpack (2 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: ACL LOG is able to log channel access violations and channel name (27 ms) [ok]: Test SET with separate read permission (60 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (13 ms) [ok]: MULTI with BGREWRITEAOF (217 ms) [ok]: ACL LOG can distinguish the transaction context (1) (37 ms) [ok]: Test SET with separate write permission (74 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (97 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (15 ms) [ok]: SRANDMEMBER with - intset (13 ms) [ok]: ACL LOG can distinguish the transaction context (2) (66 ms) [ok]: SRANDMEMBER with - hashtable (19 ms) [ok]: ACL can log errors in the context of Lua scripting (27 ms) [ok]: Test SET with read and write permissions (86 ms) [ok]: Check consistency of different data types after a reload (3067 ms) [ok]: SRANDMEMBER histogram distribution - listpack (62 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (53 ms) [ok]: ACL LOG can log failed auth attempts (13 ms) [ok]: Test BITFIELD with separate read permission (54 ms) [ok]: SRANDMEMBER histogram distribution - intset (63 ms) [ok]: MULTI with config set appendonly (227 ms) [ok]: Test BITFIELD with separate write permission (46 ms) [ok]: MULTI with config error (26 ms) [ok]: ACL LOG entries are limited to a maximum amount (97 ms) [ok]: Flushall while watching several keys by one client (30 ms) [ok]: Same dataset digest if saving/reloading as AOF? (147 ms) [ok]: Test BITFIELD with read and write permissions (54 ms) [ok]: BRPOP: timeout (1080 ms) [ok]: When default user is off, new connections are not authenticated (19 ms) [ok]: When default user has no command permission, hello command still works for other users (30 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (119 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (73 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (40 ms) [ok]: Test ACL GETUSER response information (20 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (24 ms) [ok]: Test ACL list idempotency (19 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (20 ms) [ok]: ACL HELP should not have unexpected options (6 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (130 ms) [ok]: Test R+W is the same as all permissions (11 ms) [ok]: Delete a user that the client doesn't use (20 ms) [ok]: Test basic dry run functionality (27 ms) [ok]: Delete a user that the client is using (20 ms) [ok]: ACL GENPASS command failed test (14 ms) [ok]: Test various commands for command permissions (20 ms) [ok]: Default user can not be removed (6 ms) [ok]: ACL load non-existing configured ACL file (7 ms) [ok]: BRPOP: arguments are empty (204 ms) [ok]: ACL-Metrics user AUTH failure (87 ms) [ok]: MULTI with FLUSHALL and AOF (50 ms) [ok]: BLMPOP_LEFT: with single empty list argument (101 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1004 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (1 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (25 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: ACL-Metrics invalid command accesses (80 ms) [ok]: Test various odd commands for key permissions (230 ms) [ok]: ACL-Metrics invalid key accesses (80 ms) [11/92 done]: unit/multi (6 seconds) Testing unit/latency-monitor [ok]: Existence test commands are not marked as access (56 ms) [ok]: ACL-Metrics invalid channels accesses (80 ms) [ok]: Intersection cardinaltiy commands are access commands (80 ms) [ok]: LATENCY HISTOGRAM with empty histogram (13 ms) [ok]: XDEL fuzz test (1673 ms) [ok]: LATENCY HISTOGRAM all commands (27 ms) [ok]: Big Hash table: SORT BY key (437 ms) [ok]: Big Hash table: SORT BY key with limit (15 ms) [ok]: LATENCY HISTOGRAM sub commands (37 ms) [ok]: Test general keyspace commands require some type of permission to execute (107 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (53 ms) [ok]: LATENCY HISTOGRAM command (27 ms) [ok]: default: load from include file, can access any channels (33 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (53 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (37 ms) [ok]: Cardinality commands require some type of permission to execute (144 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (40 ms) [ok]: Alice: can execute all command (20 ms) [ok]: Test sharded channel permissions (49 ms) [ok]: Bob: just execute @set and acl command (26 ms) [ok]: ACL load and save (70 ms) [ok]: Test sort with ACL permissions (107 ms) [ok]: Test DRYRUN with wrong number of arguments (27 ms) [ok]: ACL load and save with restricted channels (70 ms) [ok]: Big Hash table: SORT BY hash field (442 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (3 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (0 ms) [ok]: SORT sorted set: +inf and -inf handling (0 ms) [ok]: SORT regression for issue #19, sorting floats (12 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (1 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (1 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: SORT speed, 100 element list BY key, 100 times (20 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (23 ms) [ok]: SORT speed, 100 element list directly, 100 times (15 ms) [ok]: SORT speed, 100 element list BY , 100 times (13 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: Test behavior of loading ACLs (8 ms) [12/92 done]: unit/sort (9 seconds) Testing integration/block-repl [ok]: Default user has access to all channels irrespective of flag (13 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (33 ms) [ok]: Single channel is valid (17 ms) [13/92 done]: unit/acl-v2 (2 seconds) Testing integration/replication [ok]: Single channel is not valid with allchannels (20 ms) [ok]: BLMPOP_LEFT: timeout (1002 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (25 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: ZDIFF fuzzing - skiplist (2994 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: ZMPOP propagate as pop with count command to replica (20 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (2 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (9097 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (199 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: Slave enters handshake (4 ms) [ok]: Only default user has access to all channels irrespective of flag (13 ms) [ok]: BZMPOP readraw in RESP3 (205 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (7 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (204 ms) [ok]: ZMPOP readraw in RESP2 (1 ms) [ok]: default: load from config file with all channels permissions (33 ms) [ok]: BZMPOP readraw in RESP2 (205 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2112 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: GETRANGE fuzzing (2890 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (1 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (3 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (1 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (4 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: APPEND modifies the encoding from int to raw (0 ms) [14/92 done]: unit/type/string (11 seconds) Testing integration/replication-2 [ok]: LTRIM stress testing - quicklist (10932 ms) [ok]: ZUNIONSTORE result is sorted (160 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (14 ms) [ok]: ZMSCORE retrieve (21 ms) [ok]: ZMSCORE retrieve from empty set (12 ms) [ok]: ZMSCORE retrieve with missing member (6 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (1 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: BLMPOP_RIGHT: timeout (1102 ms) [ok]: BLMPOP_RIGHT: arguments are empty (1 ms) [ok]: BLPOP inside a transaction (0 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: Test loading an ACL file with duplicate users (28 ms) [ok]: ZSCORE - listpack (37 ms) [ok]: Test loading an ACL file with duplicate default user (34 ms) [ok]: ZMSCORE - listpack (42 ms) [ok]: Test loading duplicate users in config on startup (24 ms) [ok]: First server should have role slave after SLAVEOF (1014 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (48 ms) [ok]: Slave enters wait_bgsave (1013 ms) [ok]: First server should have role slave after SLAVEOF (127 ms) [ok]: BLMPOP propagate as pop with count command to replica (201 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: If min-slaves-to-write is honored, write is accepted (23 ms) [ok]: No write if min-slaves-to-write is < attached slaves (16 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (24 ms) [ok]: LPUSHX, RPUSHX - quicklist (49 ms) [ok]: LINSERT - quicklist (47 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (2 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (56 ms) [ok]: LINDEX random access - listpack (43 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (90 ms) [ok]: ACL from config file and config rewrite (265 ms) [ok]: LINDEX consistency test - listpack (115 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2683 ms) [ok]: LINDEX random access - listpack (80 ms) [15/92 done]: unit/acl (6 seconds) Testing integration/replication-3 [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (82 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (189 ms) [ok]: First server should have role slave after REPLICAOF (8 ms) [ok]: LINDEX consistency test - quicklist (58 ms) [ok]: LINDEX random access - quicklist (33 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (65 ms) [ok]: First server should have role slave after SLAVEOF (120 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (1286 ms) [ok]: APPEND basics (33 ms) [ok]: LINDEX consistency test - quicklist (95 ms) [ok]: APPEND basics, integer encoded values (46 ms) [ok]: LINDEX random access - quicklist (67 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (129 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (1 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (46 ms) [ok]: LMOVE left left base case - quicklist (47 ms) [ok]: LMOVE left right base case - quicklist (46 ms) [ok]: LMOVE right left base case - quicklist (49 ms) [ok]: LMOVE right right base case - quicklist (47 ms) [ok]: ZSET sorting stresser - listpack (1491 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (47 ms) [ok]: Test latency events logging (3443 ms) [ok]: LATENCY HISTORY output is ok (7 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (46 ms) [ok]: LATENCY LATEST output is ok (7 ms) [ok]: LATENCY GRAPH can output the event graph (7 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (46 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (121 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (1028 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (132 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (153 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (269 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (129 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (134 ms) [ok]: APPEND fuzzing (1338 ms) [ok]: FLUSHDB (70 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (1 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (89 ms) [ok]: SCAN regression test for issue #4906 (10725 ms) [16/92 done]: unit/scan (14 seconds) Testing integration/replication-4 [ok]: LMOVE left left with quicklist source and existing target listpack (97 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (74 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (47 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (50 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (3 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (0 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (45 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (44 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (43 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (1 ms) [ok]: LMOVE left left with listpack source and existing target listpack (0 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (0 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (43 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (89 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2963 ms) [ok]: Mass RPOP/LPOP - listpack (39 ms) [ok]: min-slaves-to-write is ignored by slaves (24 ms) [ok]: Mass RPOP/LPOP - listpack (72 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: LMPOP single existing list - quicklist (140 ms) [ok]: LMPOP multiple existing lists - quicklist (197 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: LMPOP multiple existing lists - listpack (3 ms) [ok]: LMPOP propagate as pop with count command to replica (83 ms) [ok]: LRANGE basics - quicklist (46 ms) [ok]: LRANGE inverted indexes - quicklist (49 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (43 ms) [ok]: LRANGE out of range negative end index - quicklist (43 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (7 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: Don't rehash if redis has child process (1452 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2003 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (93 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (0 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (1 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (1 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: Process title set as expected (20 ms) [ok]: LTRIM basics - quicklist (550 ms) [ok]: Redis should not propagate the read command on lazy expire (105 ms) [17/92 done]: unit/other (14 seconds) Testing integration/replication-psync [ok]: LTRIM out of range negative end index - quicklist (100 ms) [ok]: LSET - quicklist (43 ms) [ok]: LSET out of range index - quicklist (1 ms) [ok]: LTRIM basics - listpack (9 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (103 ms) [ok]: LREM remove all the occurrences - quicklist (44 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (45 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (103 ms) [ok]: MIGRATE cached connections are released after some time (15010 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (44 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (2 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (2 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (8 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (2 ms) [18/92 done]: unit/expire (15 seconds) Testing integration/replication-buffer [ok]: List listpack -> quicklist encoding conversion (178 ms) [ok]: Slave should be able to synchronize with the master (124 ms) [ok]: MIGRATE is able to migrate a key between two instances (300 ms) [ok]: List quicklist -> listpack encoding conversion (247 ms) [ok]: MIGRATE is able to copy a key between two instances (190 ms) [ok]: List encoding conversion when RDB loading (46 ms) [ok]: List invalid list-max-listpack-size config (93 ms) [ok]: LTRIM stress testing - listpack (5486 ms) [ok]: List of various encodings (100 ms) [ok]: List of various encodings - sanitize dump (2 ms) [ok]: Unblock fairness is kept while pipelining (2 ms) [ok]: Unblock fairness is kept during nested unblock (3 ms) [ok]: Blocking command accounted only once in commandstats (6 ms) [ok]: Blocking command accounted only once in commandstats after timeout (2 ms) [19/92 done]: unit/type/list-2 (17 seconds) Testing integration/shutdown [ok]: Command being unblocked cause another command to get unblocked execution order test (19 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (4063 ms) [20/92 done]: unit/type/list (17 seconds) Testing integration/aof [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (423 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (2 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (164 ms) [ok]: MIGRATE propagates TTL correctly (364 ms) [ok]: Short read: Server should start if load-truncated is yes (3 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (238 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (6 ms) [ok]: Append a new command after loading an incomplete AOF (7 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (24 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (13816 ms) [ok]: Short read + command: Server should start (6 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (7 ms) [ok]: LATENCY GRAPH can output the expire event graph (6 ms) [ok]: LATENCY of expire events are correctly collected (4606 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (10 ms) [ok]: LATENCY DOCTOR produces some output (3 ms) [ok]: LATENCY RESET is able to reset events (13 ms) [ok]: LATENCY HELP should not have unexpected options (6 ms) [21/92 done]: unit/latency-monitor (9 seconds) Testing integration/aof-race [ok]: Bad format: Server should have logged an error (8 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (679 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (4 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: Unfinished MULTI: Server should have logged an error (6 ms) [ok]: Short read: Server should have logged an error (6 ms) [ok]: Short read: Utility should confirm the AOF is not valid (17 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (13 ms) [ok]: Short read: Utility should be able to fix the AOF (10 ms) [ok]: Fixed AOF: Server should have been started (4 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (14 ms) [ok]: AOF+SPOP: Server should have been started (6 ms) [ok]: AOF+SPOP: Set should have 1 member (13 ms) [ok]: AOF+SPOP: Server should have been started (2 ms) [ok]: AOF+SPOP: Set should have 1 member (7 ms) [ok]: All replicas share one global replication buffer (116 ms) [ok]: Replication buffer will become smaller when no replica uses (37 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1026 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (2 ms) [ok]: AOF+EXPIRE: Server should have been started (6 ms) [ok]: AOF+EXPIRE: List should be empty (6 ms) [ok]: Test replication with parallel clients writing in different DBs (5055 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8990 ms) [ok]: Detect write load to master (3023 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (96 ms) [ok]: First server should have role slave after SLAVEOF (126 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (17 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (12 ms) [ok]: With min-slaves-to-write function without no-write flag (6 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (19 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (3193 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1008 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (2 ms) [ok]: Slave should be able to synchronize with the master (122 ms) [ok]: XRANGE fuzzing (10887 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (0 ms) [ok]: XTRIM with MAXLEN option basic test (67 ms) [ok]: XADD with LIMIT consecutive calls (7 ms) [ok]: XTRIM with ~ is limited (10 ms) [ok]: XTRIM without ~ is not limited (7 ms) [ok]: XTRIM without ~ and with LIMIT (8 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: MASTER and SLAVE consistency with expire (8440 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (64 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (344 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (17 ms) [ok]: ZMSCORE - skiplist (23 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (364 ms) [ok]: XADD with MINID > lastid can propagate correctly (508 ms) [ok]: SRANDMEMBER with a dict containing long chain (13194 ms) [ok]: SMOVE basics - from regular set to intset (7 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (2 ms) [ok]: SMOVE from intset to non existing destination set (2 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (12 ms) [22/92 done]: integration/aof-race (4 seconds) Testing integration/aof-multi-part [ok]: Set instance A as slave of B (109 ms) [ok]: INCRBYFLOAT replication, should not remove expire (17 ms) [ok]: Multi Part AOF can't load data when some file missing (132 ms) [ok]: GETSET replication (34 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (30 ms) [ok]: ZSET sorting stresser - skiplist (823 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2367 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (173 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (437 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (194 ms) [ok]: Replication backlog size can outgrow the backlog limit config (2392 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (216 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (18 ms) [ok]: XADD with ~ MINID can propagate correctly (44 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (250 ms) [ok]: Detect write load to master (3020 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (237 ms) [ok]: BRPOPLPUSH replication, list exists (1046 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (38 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (90 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (95 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (3766 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (173 ms) [ok]: intsets implementation stress testing (1526 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (21 ms) [23/92 done]: unit/type/set (24 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (167 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (0 ms) [ok]: test old version rdb file (12 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (186 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (9510 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1737 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (2 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (3 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (1 ms) [ok]: RDB encoding loading test (8 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: Multi Part AOF can start when no aof and no manifest (286 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (159 ms) [ok]: Server started empty with non-existing RDB file (1 ms) [ok]: Empty stream can be rewrite into AOF correctly (123 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (196 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (16 ms) [ok]: BLMOVE (left, left) replication, list exists (1060 ms) [24/92 done]: integration/replication-2 (13 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can start when we have en empty AOF dir (272 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (47 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (148 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Replication of an expired key does not delete the expired key (536 ms) [ok]: corrupt payload: #7445 - with sanitize (248 ms) [ok]: MIGRATE can correctly transfer large values (7401 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (283 ms) [ok]: XGROUP HELP should not have unexpected options (1 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (2083 ms) [25/92 done]: unit/type/stream (25 seconds) Testing integration/corrupt-dump-fuzzer [ok]: corrupt payload: hash with valid zip list header, invalid entry len (191 ms) [ok]: Test RDB stream encoding (94 ms) [ok]: Test RDB stream encoding - sanitize dump (7 ms) [ok]: MIGRATE can correctly transfer hashes (276 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (286 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (675 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: corrupt payload: invalid zlbytes header (272 ms) [ok]: Server should not start if RDB file can't be open (5 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (447 ms) [ok]: Server should not start if RDB is corrupted (18 ms) [ok]: First server should have role slave after SLAVEOF (10 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (313 ms) [ok]: BLMOVE (left, right) replication, list exists (1040 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (30 ms) [ok]: corrupt payload: valid zipped hash header, dup records (388 ms) [ok]: AOF fsync always barrier issue (5904 ms) [ok]: corrupt payload: quicklist big ziplist prev len (190 ms) [ok]: MIGRATE timeout actually works (763 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (440 ms) [ok]: corrupt payload: quicklist small ziplist prev len (293 ms) [ok]: GETEX should not append to AOF (36 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (340 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1032 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: MIGRATE can migrate multiple keys at once (433 ms) [ok]: MIGRATE with multiple keys must have empty key arg (7 ms) [ok]: corrupt payload: quicklist ziplist wrong count (274 ms) [ok]: Unknown command: Server should have logged an error (6 ms) [ok]: Shutting down master waits for replica timeout (4107 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (340 ms) [ok]: BLMOVE (right, left) replication, list exists (1033 ms) [ok]: corrupt payload: #3080 - quicklist (276 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (26 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (419 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (142 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (220 ms) [ok]: corrupt payload: quicklist with empty ziplist (186 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (94 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (19 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (213 ms) [ok]: Slave is able to evict keys created in writable slaves (6029 ms) [ok]: Test FLUSHALL aborts bgsave (1320 ms) [ok]: Writable replica doesn't return expired keys (143 ms) [ok]: PFCOUNT updates cache on readonly replica (18 ms) [ok]: bgsave resets the change counter (130 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (180 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (290 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (137 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1003 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (3 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (113 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (150 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (280 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (213 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (402 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (19 ms) [26/92 done]: unit/dump (27 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (796 ms) [ok]: RDB load zipmap hash: converts to listpack (27 ms) [ok]: BLMOVE (right, right) replication, list exists (1043 ms) [ok]: corrupt payload: #3080 - ziplist (310 ms) [27/92 done]: integration/replication-3 (15 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (96 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (17 ms) [ok]: BLPOP followed by role change, issue #2473 (272 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (16 ms) [ok]: Shutting down master waits for replica then fails (1609 ms) [ok]: Generate timestamp annotations in AOF (450 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (16 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (2 ms) [ok]: BZMPOP with multiple blocked clients (4 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (590 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (461 ms) [ok]: Successfully load AOF which has timestamp annotations inside (23 ms) [28/92 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: BZMPOP propagate as pop with count command to replica (217 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (2 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (212 ms) [29/92 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/logging [ok]: RDB load ziplist zset: converts to listpack when RDB loading (25 ms) [ok]: Second server should have role master at first (1 ms) [ok]: SLAVEOF should start with link status "down" (17 ms) [ok]: The role should immediately be changed to "replica" (6 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (261 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (436 ms) [ok]: Crash report generated on SIGABRT (27 ms) [ok]: Sync should have transferred keys from master (4 ms) [ok]: The link status should be up (7 ms) [ok]: SET on the master should immediately propagate (12 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: Shutting down master waits for replica then aborted (861 ms) [30/92 done]: integration/shutdown (12 seconds) Testing integration/psync2 [ok]: Crash report generated on DEBUG SEGFAULT (57 ms) [ok]: corrupt payload: listpack invalid size header (300 ms) [31/92 done]: integration/logging (1 seconds) Testing integration/psync2-reg [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (17 ms) [ok]: client freed during loading (1936 ms) [32/92 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2-pingoff [ok]: ZSET skiplist order consistency when elements are moved (685 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (1 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (6 ms) [ok]: ZRANDMEMBER - skiplist (6 ms) [ok]: ZRANDMEMBER with RESP3 (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: FLUSHDB / FLUSHALL should replicate (351 ms) [ok]: ROLE in master reports master with a slave (6 ms) [ok]: ROLE in slave reports slave in connected state (7 ms) [ok]: corrupt payload: listpack too long entry len (277 ms) [ok]: ZRANDMEMBER with - skiplist (191 ms) [ok]: Truncate AOF to specific timestamp (959 ms) [ok]: AOF enable will create manifest file (464 ms) [ok]: ZRANDMEMBER with - listpack (191 ms) [ok]: zset score double range (1 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (11 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (5 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: corrupt payload: listpack very long entry len (279 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6434 ms) [33/92 done]: unit/type/zset (29 seconds) Testing integration/psync2-master-restart [ok]: Stress tester for #3343-alike bugs comp: 0 (10313 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (9 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (5 ms) [ok]: corrupt payload: listpack too long entry prev len (324 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (4410 ms) [ok]: corrupt payload: stream with duplicate consumers (293 ms) [ok]: corrupt payload: hash ziplist with duplicate records (200 ms) [ok]: PSYNC2 pingoff: setup (1035 ms) [ok]: PSYNC2 #3899 regression: setup (1053 ms) [ok]: PSYNC2 pingoff: write and wait replication (27 ms) [ok]: Slave should be able to synchronize with the master (153 ms) [ok]: corrupt payload: hash listpack with duplicate records (330 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (1 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1523 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (263 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (29 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (254 ms) [ok]: corrupt payload: hash ziplist uneven record count (329 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1382 ms) [34/92 done]: integration/replication-buffer (15 seconds) Testing integration/failover [ok]: corrupt payload: hash duplicate records (313 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (696 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: AOF enable/disable auto gc (267 ms) [ok]: corrupt payload: hash empty zipmap (287 ms) [ok]: Test RDB load info (2796 ms) [ok]: AOF can produce consecutive sequence number after reload (171 ms) [ok]: failover command fails without connected replica (3 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (300 ms) [ok]: setup replication for following tests (159 ms) [ok]: failover command fails with invalid host (4 ms) [ok]: failover command fails with invalid port (7 ms) [ok]: failover command fails with just force and timeout (3 ms) [ok]: failover command fails when sent to a replica (7 ms) [ok]: failover command fails with force without timeout (4 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (442 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (347 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1237 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (7 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (400 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (3572 ms) [ok]: failover command to specific replica works (713 ms) [ok]: AOF will trigger limit when AOFRW fails many times (600 ms) [ok]: EVAL can process writes from AOF in read-only replicas (185 ms) [ok]: Test redis-check-aof for old style resp AOF (6 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (10 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (17 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (16 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (27 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (282 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (20 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (23 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (10 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (307 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (154 ms) [35/92 done]: integration/aof (16 seconds) Testing integration/redis-cli [ok]: corrupt payload: fuzzer findings - hash crash (297 ms) [ok]: PSYNC2: cluster is consistent after failover (26 ms) [ok]: failover command to any replica works (920 ms) [ok]: Interactive CLI: INFO response should be printed raw (80 ms) [ok]: Interactive CLI: Status reply (76 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (330 ms) [ok]: Interactive CLI: Integer reply (69 ms) [ok]: Interactive CLI: Bulk reply (87 ms) [ok]: Interactive CLI: Multi-bulk reply (83 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (280 ms) [ok]: Detect write load to master (4036 ms) [ok]: failover to a replica with force works (556 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (297 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9877 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: Interactive CLI: Parsing quotes (533 ms) [ok]: corrupt payload: fuzzer findings - empty intset (196 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (168 ms) [ok]: failover with timeout aborts if replica never catches up (679 ms) [ok]: Test child sending info (3090 ms) [ok]: failovers can be aborted (135 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (2542 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (300 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5017 ms) [ok]: script won't load anymore if it's in rdb (3 ms) [ok]: Interactive CLI: Subscribed mode (667 ms) [ok]: failover aborts if target rejects sync request (327 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (281 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (287 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (467 ms) [ok]: Non-interactive TTY CLI: Status reply (24 ms) [ok]: Non-interactive TTY CLI: Integer reply (26 ms) [ok]: Non-interactive TTY CLI: Bulk reply (27 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (18 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (42 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (19 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (3072 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (285 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (121 ms) [ok]: Non-interactive non-TTY CLI: Status reply (13 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (13 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (12 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (7 ms) [ok]: failed bgsave prevents writes (576 ms) [ok]: Test replication with blocking lists and sorted sets operations (25040 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (92 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (11 ms) [36/92 done]: integration/aof-multi-part (14 seconds) Testing integration/redis-benchmark [37/92 done]: integration/rdb (12 seconds) Testing integration/dismiss-mem [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (42 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (13 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (280 ms) [ok]: Make the old master a replica of the new one and check conditions (1047 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (45 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (27 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (29 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (10 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (47 ms) [38/92 done]: integration/block-repl (26 seconds) Testing unit/pubsub [ok]: benchmark: set,get (60 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (252 ms) [ok]: benchmark: connecting using URI set,get (57 ms) [ok]: Pub/Sub PING on RESP2 (23 ms) [ok]: Pub/Sub PING on RESP3 (19 ms) [ok]: benchmark: connecting using URI with authentication set,get (63 ms) [ok]: PUBLISH/SUBSCRIBE basics (48 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (25 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (23 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (208 ms) [ok]: SUBSCRIBE to one channel more than once (16 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (7 ms) [39/92 done]: integration/failover (6 seconds) Testing unit/pubsubshard [ok]: PUBLISH/PSUBSCRIBE basics (42 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (6 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (31 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (19 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (152 ms) [ok]: PubSub messages with CLIENT REPLY OFF (117 ms) [ok]: benchmark: full test suite (323 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (13 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (9 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (54 ms) [ok]: NUMPATs returns the number of unique patterns (58 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (24 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (26 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (11 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (25 ms) [ok]: SSUBSCRIBE to one channel more than once (9 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (13 ms) [ok]: PUBSUB command basics (4 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (23 ms) [ok]: Keyspace notifications: we receive keyspace notifications (62 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (40 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (290 ms) [ok]: Keyspace notifications: we receive keyevent notifications (62 ms) [ok]: Keyspace notifications: we can receive both kind of events (19 ms) [ok]: Keyspace notifications: we are able to mask events (27 ms) [ok]: PubSubShard with CLIENT REPLY OFF (100 ms) [ok]: Keyspace notifications: general events test (41 ms) [ok]: Keyspace notifications: list events test (38 ms) [ok]: Keyspace notifications: set events test (44 ms) [ok]: Keyspace notifications: zset events test (33 ms) [ok]: Keyspace notifications: hash events test (30 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (292 ms) [ok]: Keyspace notifications: stream events test (50 ms) [ok]: benchmark: multi-thread set,get (580 ms) [ok]: Keyspace notifications: expired events (triggered expire) (136 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (242 ms) [ok]: setup replication for following tests (111 ms) [ok]: publish message to master and receive on replica (3 ms) [ok]: Keyspace notifications: expired events (background expire) (137 ms) [ok]: Keyspace notifications: evicted events (30 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (27 ms) [ok]: Keyspace notifications: new key test (20 ms) [ok]: publish to self inside multi (26 ms) [ok]: publish to self inside script (10 ms) [ok]: unsubscribe inside multi, and publish to self (34 ms) [ok]: dismiss all data types memory (1548 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (278 ms) [40/92 done]: unit/pubsub (2 seconds) Testing unit/slowlog [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (286 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (214 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (242 ms) [ok]: dismiss client output buffer (601 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 24525) (11 ms) [ok]: SLOWLOG - max entries is correctly handled (202 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (1 ms) [ok]: SLOWLOG - RESET subcommand works (1 ms) [41/92 done]: unit/pubsubshard (2 seconds) Testing unit/scripting [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (13 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (15 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (251 ms) [ok]: dismiss client query buffer (233 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: SLOWLOG - logged entry sanity check (217 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (6 ms) [ok]: EVAL - Return _G (10 ms) [ok]: EVAL - Return table with a metatable that raise error (10 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (33 ms) [ok]: EVAL - Return table with a metatable that call redis (4 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (10 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (3 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (13 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (34 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (10 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (11 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (13 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (8 ms) [ok]: Dumping an RDB - functions only: no (2612 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (5 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (66 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (0 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (310 ms) [ok]: EVAL - is Lua able to call Redis API? (26 ms) [ok]: benchmark: pipelined full set,get (1533 ms) [ok]: EVAL - Redis integer -> Lua type conversion (17 ms) [ok]: EVAL - Lua number -> Redis integer conversion (19 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (17 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (30 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (13 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (20 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (17 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (34 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (184 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (22 ms) [ok]: benchmark: arbitrary command (206 ms) [ok]: EVAL - Scripts do not block on blpop command (27 ms) [ok]: EVAL - Scripts do not block on brpop command (19 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (24 ms) [ok]: EVAL - Scripts do not block on blmove command (26 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (27 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (27 ms) [ok]: EVAL - Scripts do not block on wait (13 ms) [ok]: benchmark: keyspace length (166 ms) [ok]: SLOWLOG - can clean older entries (204 ms) [ok]: corrupt payload: fuzzer findings - huge string (198 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (53 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (37 ms) [ok]: EVAL - Scripts can run non-deterministic commands (14 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (13 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (11 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (12 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (16 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (14 ms) [ok]: EVAL - JSON string decoding (13 ms) [ok]: EVAL - JSON smoke test (13 ms) [ok]: EVAL - cmsgpack can pack double? (7 ms) [ok]: EVAL - cmsgpack can pack negative int64? (13 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (178 ms) [42/92 done]: integration/redis-benchmark (4 seconds) Testing unit/functions [ok]: PSYNC2 #3899 regression: kill chained replica (6 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (170 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (6 ms) [ok]: SLOWLOG - can be disabled (405 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (2 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (3 ms) [ok]: FUNCTION - Basic usage (9 ms) [ok]: FUNCTION - Load with unknown argument (7 ms) [ok]: FUNCTION - Create an already exiting library raise error (3 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (3 ms) [ok]: FUNCTION - Create a library with wrong name format (7 ms) [ok]: FUNCTION - Create library with unexisting engine (7 ms) [ok]: FUNCTION - Test uncompiled script (6 ms) [ok]: FUNCTION - test replace argument (14 ms) [ok]: FUNCTION - test function case insensitive (6 ms) [43/92 done]: unit/slowlog (2 seconds) Testing unit/maxmemory [ok]: FUNCTION - test replace argument with failure keeps old libraries (10 ms) [ok]: FUNCTION - test function delete (14 ms) [ok]: FUNCTION - test fcall bad arguments (10 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (3 ms) [ok]: FUNCTION - test fcall negative number of keys (7 ms) [ok]: FUNCTION - test delete on not exiting library (3 ms) [ok]: FUNCTION - test function kill when function is not running (7 ms) [ok]: FUNCTION - test wrong subcommand (6 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (407 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (13 ms) [ok]: FUNCTION - test loading from rdb (27 ms) [ok]: EVAL - Numerical sanity check from bitop (10 ms) [ok]: EVAL - Verify minimal bitop functionality (10 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (267 ms) [ok]: EVAL - Able to parse trailing comments (14 ms) [ok]: FUNCTION - test debug reload different options (44 ms) [ok]: EVAL_RO - Successful case (20 ms) [ok]: EVAL_RO - Cannot run write commands (20 ms) [ok]: redis.sha1hex() implementation (26 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (56 ms) [ok]: Globals protection reading an undeclared global variable (14 ms) [ok]: Globals protection setting an undeclared global* (13 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (30 ms) [ok]: lua bit.tohex bug (20 ms) [ok]: Replication: commands with many arguments (issue #1221) (15076 ms) [ok]: FUNCTION - test function dump and restore (40 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (5111 ms) [ok]: FUNCTION - test function dump and restore with flush argument (27 ms) [ok]: Test an example script DECR_IF_GT (67 ms) [ok]: FUNCTION - test function dump and restore with append argument (64 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (268 ms) [ok]: spopwithcount rewrite srem command (154 ms) [ok]: dismiss replication backlog (1597 ms) [ok]: FUNCTION - test function dump and restore with replace argument (46 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (20 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (7 ms) [ok]: FUNCTION - test fcall_ro with write command (10 ms) [ok]: FUNCTION - test fcall_ro with read only commands (10 ms) [ok]: FUNCTION - test keys and argv (17 ms) [ok]: FUNCTION - test command get keys on fcall (6 ms) [ok]: FUNCTION - test command get keys on fcall_ro (7 ms) [44/92 done]: integration/psync2-master-restart (12 seconds) Testing unit/introspection [ok]: Dumping an RDB - functions only: yes (1510 ms) [45/92 done]: integration/dismiss-mem (5 seconds) Testing unit/introspection-2 [ok]: eviction due to output buffers of many MGET clients, client eviction: false (544 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (272 ms) [ok]: PING (1 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (1 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (2 ms) [ok]: The microsecond part of the TIME command will not overflow (3 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (160 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3392 ms) [ok]: CLIENT KILL close the client connection during bgsave (65 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (6 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (54 ms) [ok]: FUNCTION - test function kill (443 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (303 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (46 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (47 ms) [ok]: MONITOR can log executed commands (10 ms) [ok]: MONITOR can log commands issued by the scripting engine (10 ms) [ok]: MONITOR can log commands issued by functions (10 ms) [ok]: MONITOR supports redacting command arguments (26 ms) [ok]: MONITOR correctly handles multi-exec cases (17 ms) [ok]: corrupt payload: fuzzer findings - empty zset (299 ms) [ok]: MONITOR log blocked command only once (24 ms) [ok]: EVAL does not leak in the Lua stack (808 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (1 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (2 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (5 ms) [ok]: CLIENT SETNAME can assign a name to this connection (3 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (5 ms) [ok]: Number conversion precision test (issue #1118) (12 ms) [ok]: After CLIENT SETNAME, connection can still be closed (1 ms) [ok]: String containing number precision test (regression of issue #1118) (4 ms) [ok]: CLIENT SETINFO can set a library name to this connection (7 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (10 ms) [ok]: CLIENT SETINFO invalid args (16 ms) [ok]: RESET does NOT clean library name (7 ms) [ok]: CLIENT SETINFO can clear library name (7 ms) [ok]: Scripts can handle commands with incorrect arity (19 ms) [ok]: Correct handling of reused argv (issue #1939) (8 ms) [ok]: Functions in the Redis namespace are able to report errors (10 ms) [ok]: PSYNC2 #3899 regression: kill first replica (5 ms) [ok]: CLUSTER RESET can not be invoke from within a script (14 ms) [ok]: Script with RESP3 map (49 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (355 ms) [ok]: FUNCTION - test script kill not working on function (440 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (281 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (90 ms) [ok]: Script return recursive object (187 ms) [ok]: Script check unpack with massive arguments (56 ms) [ok]: Script read key with expiration set (4 ms) [ok]: Script del key with expiration set (7 ms) [ok]: Script ACL check (20 ms) [ok]: Binary code loading failed (3 ms) [ok]: Try trick global protection 1 (3 ms) [ok]: Try trick global protection 2 (3 ms) [ok]: Try trick global protection 3 (4 ms) [ok]: Try trick global protection 4 (6 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (1140 ms) [ok]: Try trick readonly table on redis table (6 ms) [ok]: Try trick readonly table on json table (13 ms) [ok]: Try trick readonly table on cmsgpack table (6 ms) [ok]: Try trick readonly table on bit table (8 ms) [ok]: Test loadfile are not available (6 ms) [ok]: Test dofile are not available (7 ms) [ok]: Test print are not available (7 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (280 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (338 ms) [ok]: FUNCTION - test function kill not working on eval (443 ms) [ok]: FUNCTION - test function flush (53 ms) [ok]: FUNCTION - test function wrong argument (10 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (6 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (293 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7844 ms) [ok]: Scan mode (1583 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (274 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (429 ms) [ok]: CONFIG save params special case handled properly (1114 ms) [ok]: Connect a replica to the master instance (116 ms) [ok]: FUNCTION - creation is replicated to replica (12 ms) [ok]: FUNCTION - call on replica (3 ms) [ok]: FUNCTION - restore is replicated to replica (26 ms) [ok]: FUNCTION - delete is replicated to replica (9 ms) [ok]: FUNCTION - flush is replicated to replica (11 ms) [ok]: CONFIG sanity (67 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (109 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (196 ms) [ok]: First server should have role slave after SLAVEOF (130 ms) [ok]: Disconnecting the replica from master instance (126 ms) [ok]: FUNCTION - test replication to replica on rdb phase (3 ms) [ok]: Timedout script does not cause a false dead client (115 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (2 ms) [ok]: FUNCTION - create on read only replica (8 ms) [ok]: FUNCTION - delete on read only replica (6 ms) [ok]: FUNCTION - function effect is replicated to replica (12 ms) [ok]: FUNCTION - modify key space of read only replica (4 ms) [ok]: Data divergence can happen under default conditions (70 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (110 ms) [ok]: Data divergence is allowed on writable replicas (60 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (869 ms) [ok]: Timedout script link is still usable after Lua returns (152 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (277 ms) [46/92 done]: integration/replication-4 (29 seconds) Testing unit/limits [ok]: ziplist implementation: value encoding and backlink (13452 ms) [ok]: PSYNC2: cluster is consistent after failover (9 ms) [ok]: Without maxmemory small integers are shared (20 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (169 ms) [ok]: Slave should be able to synchronize with the master (247 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (20 ms) [ok]: Timedout scripts and unblocked command (394 ms) [ok]: With maxmemory and LRU policy integers are not shared (33 ms) [ok]: CONFIG REWRITE sanity (839 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (213 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (14 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (294 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: Before the replica connects we issue two EVAL commands (13 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (280 ms) [ok]: Connect a replica to the master instance (125 ms) [ok]: Replication of script multiple pushes to list with BLPOP (17 ms) [ok]: Lua scripts using SELECT are replicated correctly (21 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (498 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (193 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3012 ms) [ok]: LIBRARIES - test shared function can access default globals (4 ms) [ok]: LIBRARIES - usage and code sharing (14 ms) [ok]: LIBRARIES - test registration failure revert the entire load (13 ms) [ok]: LIBRARIES - test registration function name collision (10 ms) [ok]: LIBRARIES - test registration function name collision on same library (2 ms) [ok]: LIBRARIES - test registration with no argument (3 ms) [ok]: LIBRARIES - test registration with only name (6 ms) [ok]: LIBRARIES - test registration with to many arguments (7 ms) [ok]: LIBRARIES - test registration with no string name (4 ms) [ok]: LIBRARIES - test registration with wrong name format (6 ms) [ok]: LIBRARIES - test registration with empty name (6 ms) [ok]: Check if maxclients works refusing connections (1027 ms) [ok]: LIBRARIES - math.random from function load (3 ms) [ok]: LIBRARIES - redis.call from function load (3 ms) [ok]: LIBRARIES - redis.setresp from function load (8 ms) [ok]: LIBRARIES - redis.set_repl from function load (5 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (4 ms) [ok]: LIBRARIES - malicious access test (20 ms) [ok]: LIBRARIES - delete removed all functions on library (13 ms) [ok]: LIBRARIES - register function inside a function (10 ms) [ok]: LIBRARIES - register library with no functions (7 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (317 ms) [47/92 done]: integration/corrupt-dump (20 seconds) Testing unit/obuf-limits [48/92 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: CONFIG REWRITE handles save and shutdown properly (960 ms) [ok]: CONFIG SET with multiple args (43 ms) [ok]: CONFIG SET rollback on set error (57 ms) [ok]: BITCOUNT returns 0 against non existing key (9 ms) [ok]: BITCOUNT returns 0 with out of range indexes (10 ms) [ok]: CONFIG SET client-output-buffer-limit (37 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (10 ms) [ok]: CONFIG SET rollback on apply error (90 ms) [ok]: CONFIG SET duplicate configs (6 ms) [ok]: BITCOUNT against test vector #1 (10 ms) [ok]: BITCOUNT against test vector #2 (10 ms) [ok]: CONFIG SET set immutable (6 ms) [ok]: CONFIG GET hidden configs (10 ms) [ok]: BITCOUNT against test vector #3 (10 ms) [ok]: CONFIG GET multiple args (7 ms) [ok]: BITCOUNT against test vector #4 (10 ms) [ok]: BITCOUNT against test vector #5 (10 ms) [ok]: Connecting as a replica (2243 ms) [ok]: redis-server command line arguments - error cases (133 ms) [ok]: LIBRARIES - load timeout (507 ms) [ok]: LIBRARIES - verify global protection on the load run (3 ms) [ok]: LIBRARIES - named arguments (6 ms) [ok]: LIBRARIES - named arguments, bad function name (3 ms) [ok]: LIBRARIES - named arguments, bad callback type (4 ms) [ok]: LIBRARIES - named arguments, bad description (6 ms) [ok]: LIBRARIES - named arguments, unknown argument (4 ms) [ok]: LIBRARIES - named arguments, missing function name (6 ms) [ok]: LIBRARIES - named arguments, missing callback (2 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10058 ms) [ok]: FUNCTION - test function restore with function name collision (67 ms) [49/92 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/bitfield [ok]: FUNCTION - test function list with code (16 ms) [ok]: FUNCTION - test function list with pattern (10 ms) [ok]: FUNCTION - test function list wrong argument (6 ms) [ok]: FUNCTION - test function list with bad argument to library name (4 ms) [ok]: FUNCTION - test function list withcode multiple times (6 ms) [ok]: FUNCTION - test function list libraryname multiple times (3 ms) [ok]: FUNCTION - verify OOM on function load and function restore (51 ms) [ok]: FUNCTION - verify allow-omm allows running any command (27 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (293 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (3059 ms) [ok]: BITFIELD signed SET and GET basics (20 ms) [ok]: BITFIELD unsigned SET and GET basics (20 ms) [ok]: BITFIELD signed SET and GET together (10 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (10 ms) [ok]: BITFIELD with only key as argument (10 ms) [ok]: BITFIELD # form (20 ms) [ok]: BITFIELD basic INCRBY form (16 ms) [ok]: BITFIELD chaining of multiple commands (9 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (190 ms) [ok]: BITFIELD unsigned overflow wrap (20 ms) [ok]: BITFIELD unsigned overflow sat (24 ms) [ok]: Connect a replica to the master instance (133 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (7 ms) [ok]: BITFIELD signed overflow wrap (23 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (6 ms) [ok]: Redis.set_repl() don't accept invalid values (10 ms) [ok]: BITFIELD signed overflow sat (23 ms) [ok]: Test selective replication of certain Redis commands from Lua (39 ms) [ok]: FUNCTION - wrong flags type named arguments (3 ms) [ok]: FUNCTION - wrong flag type (4 ms) [ok]: FUNCTION - unknown flag (4 ms) [ok]: FUNCTION - write script on fcall_ro (9 ms) [ok]: PRNG is seeded randomly for command replication (23 ms) [ok]: FUNCTION - write script with no-writes flag (12 ms) [ok]: FUNCTION - deny oom (14 ms) [ok]: Using side effects is not a problem with command replication (30 ms) [ok]: FUNCTION - deny oom on no-writes function (22 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (187 ms) [ok]: FUNCTION - allow stale (38 ms) [ok]: FUNCTION - redis version api (25 ms) [ok]: FUNCTION - function stats (14 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (27 ms) [ok]: FUNCTION - function stats delete library (10 ms) [ok]: FUNCTION - test function stats on loading failure (21 ms) [ok]: FUNCTION - function stats cleaned after flush (7 ms) [ok]: FUNCTION - function test empty engine (4 ms) [ok]: FUNCTION - function test unknown metadata value (4 ms) [ok]: FUNCTION - function test no name (6 ms) [ok]: FUNCTION - function test multiple names (3 ms) [ok]: FUNCTION - function test name with quotes (5 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (174 ms) [ok]: FUNCTION - trick global protection 1 (16 ms) [ok]: FUNCTION - test getmetatable on script load (5 ms) [ok]: BITCOUNT fuzzing without start/end (980 ms) [50/92 done]: unit/functions (5 seconds) Testing unit/geo [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (2457 ms) [ok]: GEO with wrong type src key (26 ms) [ok]: GEO with non existing src key (29 ms) [ok]: GEO BYLONLAT with empty search (30 ms) [ok]: GEO BYMEMBER with non existing member (34 ms) [ok]: GEOADD create (6 ms) [ok]: GEOADD update (7 ms) [ok]: GEOADD update with CH option (4 ms) [ok]: GEOADD update with NX option (9 ms) [ok]: GEOADD update with XX option (15 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (4 ms) [ok]: GEOADD update with XX NX option will return syntax error (4 ms) [ok]: GEOADD update with invalid option (5 ms) [ok]: GEOADD invalid coordinates (1 ms) [51/92 done]: integration/psync2-pingoff (17 seconds) Testing unit/memefficiency [ok]: GEOADD multi add (3 ms) [ok]: Check geoset values (6 ms) [ok]: Piping raw protocol (1446 ms) [ok]: GEORADIUS simple (sorted) (7 ms) [ok]: GEORADIUS_RO simple (sorted) (7 ms) [ok]: GEOSEARCH simple (sorted) (6 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (1 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (6 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (4 ms) [ok]: Options -X with illegal argument (41 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (6 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (3 ms) [ok]: GEOSEARCH withdist (sorted) (3 ms) [ok]: GEORADIUS with COUNT (7 ms) [ok]: GEORADIUS with multiple WITH* tokens (10 ms) [ok]: GEORADIUS with ANY not sorted by default (3 ms) [ok]: GEORADIUS with ANY sorted by ASC (3 ms) [ok]: GEORADIUS with ANY but no COUNT (3 ms) [ok]: GEORADIUS with COUNT but missing integer argument (4 ms) [ok]: GEORADIUS with COUNT DESC (1 ms) [ok]: GEORADIUS HUGE, issue #2767 (5 ms) [ok]: DUMP RESTORE with -x option (83 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (6 ms) [ok]: BITFIELD overflow detection fuzzing (940 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (30 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (512 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (10 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (9 ms) [ok]: GEOSEARCH non square, long and narrow (19 ms) [ok]: test RESP2/2 big number protocol parsing (13 ms) [ok]: GEOSEARCH corner point test (17 ms) [ok]: test RESP2/2 malformed big number protocol parsing (10 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (10 ms) [ok]: test RESP2/2 map protocol parsing (7 ms) [ok]: GEOHASH with only key as argument (13 ms) [ok]: test RESP2/2 set protocol parsing (13 ms) [ok]: DUMP RESTORE with -X option (74 ms) [ok]: test RESP2/2 double protocol parsing (10 ms) [ok]: GEOPOS simple (19 ms) [ok]: test RESP2/2 null protocol parsing (10 ms) [ok]: GEOPOS missing element (11 ms) [ok]: test RESP2/2 verbatim protocol parsing (14 ms) [ok]: GEOPOS with only key as argument (9 ms) [ok]: GEODIST simple & unit (6 ms) [ok]: test RESP2/2 true protocol parsing (9 ms) [ok]: test RESP2/2 false protocol parsing (10 ms) [ok]: GEODIST missing elements (15 ms) [ok]: test RESP2/3 big number protocol parsing (10 ms) [ok]: GEORADIUS STORE option: syntax error (10 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (4 ms) [ok]: test RESP2/3 malformed big number protocol parsing (7 ms) [ok]: test RESP2/3 map protocol parsing (14 ms) [ok]: GEORANGE STORE option: incompatible options (20 ms) [ok]: test RESP2/3 set protocol parsing (9 ms) [ok]: test RESP2/3 double protocol parsing (6 ms) [ok]: GEORANGE STORE option: plain usage (23 ms) [ok]: test RESP2/3 null protocol parsing (10 ms) [52/92 done]: integration/redis-cli (13 seconds) Testing unit/hyperloglog [ok]: test RESP2/3 verbatim protocol parsing (13 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (17 ms) [ok]: test RESP2/3 true protocol parsing (6 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (7 ms) [ok]: GEORANGE STOREDIST option: plain usage (6 ms) [ok]: test RESP2/3 false protocol parsing (13 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (3 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (24 ms) [ok]: test RESP3/2 big number protocol parsing (9 ms) [ok]: test RESP3/2 malformed big number protocol parsing (6 ms) [ok]: test RESP3/2 map protocol parsing (7 ms) [ok]: GEOSEARCH the box spans -180° or 180° (16 ms) [ok]: test RESP3/2 set protocol parsing (6 ms) [ok]: test RESP3/2 double protocol parsing (6 ms) [ok]: GEOSEARCH with small distance (17 ms) [ok]: BITCOUNT fuzzing with start/end (910 ms) [ok]: test RESP3/2 null protocol parsing (7 ms) [ok]: test RESP3/2 verbatim protocol parsing (7 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: test RESP3/2 true protocol parsing (6 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: test RESP3/2 false protocol parsing (9 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: test RESP3/3 big number protocol parsing (10 ms) [ok]: BITCOUNT regression test for github issue #582 (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (7 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: test RESP3/3 map protocol parsing (7 ms) [ok]: test RESP3/3 set protocol parsing (6 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: test RESP3/3 double protocol parsing (7 ms) [ok]: test RESP3/3 null protocol parsing (7 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (6 ms) [ok]: test RESP3/3 true protocol parsing (10 ms) [ok]: BITOP NOT (known string) (1 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: test RESP3/3 false protocol parsing (7 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: test resp3 attribute protocol parsing (7 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (0 ms) [ok]: Script block the time during execution (20 ms) [ok]: redis-server command line arguments - save with empty input (1089 ms) [ok]: Script delete the expired key (37 ms) [ok]: TIME command using cached time (23 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (476 ms) [ok]: BITFIELD overflow wrap fuzzing (504 ms) [ok]: BITFIELD regression for #3221 (1 ms) [ok]: BITFIELD regression for #3564 (2 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: Script block the time in some expiration related commands (103 ms) [ok]: BITOP and fuzzing (283 ms) [ok]: RESTORE expired keys with expiration time (25 ms) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (194 ms) [ok]: Memory efficiency with values in range 32 (626 ms) [ok]: TOUCH alters the last access time of a key (3016 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (381 ms) [ok]: cannot modify protected configuration - no (7 ms) [ok]: BITOP or fuzzing (328 ms) [ok]: Script - disallow write on OOM (20 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (7 ms) [ok]: EVAL - Return _G (10 ms) [ok]: EVAL - Return table with a metatable that raise error (7 ms) [ok]: EVAL - Return table with a metatable that call redis (6 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (7 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (7 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (6 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (10 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (10 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (3 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (6 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (7 ms) [ok]: Detect write load to master (4033 ms) [ok]: EVAL - is Lua able to call Redis API? (6 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (3 ms) [ok]: Memory efficiency with values in range 64 (362 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (3 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (3 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (6 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (3 ms) [ok]: EVAL - Redis integer -> Lua type conversion (8 ms) [ok]: EVAL - Lua number -> Redis integer conversion (8 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (7 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (13 ms) [ok]: cannot modify protected configuration - local (20 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (3 ms) [ok]: BITFIELD: setup slave (102 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (6 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (7 ms) [ok]: BITFIELD: write on master, read on slave (15 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (13 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (17 ms) [ok]: EVAL - Scripts do not block on blpop command (10 ms) [ok]: EVAL - Scripts do not block on brpop command (10 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (10 ms) [ok]: EVAL - Scripts do not block on blmove command (10 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (10 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (10 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (340 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (33 ms) [ok]: EVAL - Scripts can run non-deterministic commands (2 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (5 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (4 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (3 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (3 ms) [ok]: EVAL - JSON string decoding (4 ms) [ok]: EVAL - JSON smoke test (6 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (2 ms) [53/92 done]: unit/bitfield (2 seconds) Testing unit/lazyfree [ok]: BITOP xor fuzzing (463 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (5 ms) [ok]: HyperLogLog self test passes (977 ms) [ok]: PFADD without arguments creates an HLL value (13 ms) [ok]: BITOP NOT fuzzing (39 ms) [ok]: Approximated cardinality after creation is zero (6 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (1 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (2 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (9 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (5 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (6 ms) [ok]: PFADD returns 0 when no reg was modified (13 ms) [ok]: PFADD works with empty string (regression) (11 ms) [ok]: PFCOUNT returns approximated cardinality of set (22 ms) [ok]: Memory efficiency with values in range 128 (442 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (352 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (413 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (5 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (24 ms) [ok]: SCRIPTING FLUSH ASYNC (9 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (1 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (1 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: UNLINK can reclaim memory in background (370 ms) [ok]: Memory efficiency with values in range 1024 (423 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (371 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 43254) (6 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1137 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (6 ms) [ok]: TOUCH returns the number of existing keys specified (20 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (4 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (1 ms) [ok]: command stats for GEOADD (23 ms) [ok]: errors stats for GEOADD (14 ms) [ok]: command stats for EXPIRE (17 ms) [ok]: command stats for BRPOP (25 ms) [ok]: command stats for MULTI (53 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (18070 ms) [ok]: HyperLogLogs are promote from sparse to dense (680 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: command stats for scripts (43 ms) [ok]: COMMAND COUNT get total number of Redis commands (7 ms) [ok]: COMMAND GETKEYS GET (6 ms) [ok]: COMMAND GETKEYSANDFLAGS (27 ms) [ok]: COMMAND GETKEYSANDFLAGS invalid args (6 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (367 ms) [ok]: EVAL does not leak in the Lua stack (494 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (4 ms) [ok]: COMMAND GETKEYS XGROUP (7 ms) [ok]: COMMAND GETKEYS EVAL with keys (6 ms) [ok]: COMMAND GETKEYS EVAL without keys (7 ms) [ok]: COMMAND GETKEYS LCS (7 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (8 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (97 ms) [ok]: COMMAND LIST syntax error (15 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (9 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (4 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (7 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (109 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (43 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (7 ms) [ok]: COMMAND INFO of invalid subcommands (10 ms) [ok]: SET command will not be marked with movablekeys (7 ms) [ok]: GET command will not be marked with movablekeys (7 ms) [ok]: MSET command will not be marked with movablekeys (6 ms) [ok]: BITFIELD command will not be marked with movablekeys (9 ms) [ok]: LMOVE command will not be marked with movablekeys (6 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (461 ms) [ok]: LPOP command will not be marked with movablekeys (7 ms) [ok]: BLPOP command will not be marked with movablekeys (6 ms) [ok]: PING command will not be marked with movablekeys (6 ms) [ok]: MGET: mget shouldn't be propagated in Lua (86 ms) [ok]: MEMORY command will not be marked with movablekeys (7 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (6 ms) [ok]: RENAME command will not be marked with movablekeys (6 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (7 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (7 ms) [ok]: XREAD command is marked with movablekeys (4 ms) [ok]: EVAL command is marked with movablekeys (4 ms) [ok]: SORT command is marked with movablekeys (6 ms) [ok]: SORT_RO command is marked with movablekeys (7 ms) [ok]: MIGRATE command is marked with movablekeys (7 ms) [ok]: GEORADIUS command is marked with movablekeys (6 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (108 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (1142 ms) [54/92 done]: unit/introspection-2 (8 seconds) Testing unit/wait [ok]: lazy free a stream with all types of metadata (576 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (430 ms) [ok]: lazy free a stream with deleted cgroup (11 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (324 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (3 ms) [ok]: Number conversion precision test (issue #1118) (9 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (3 ms) [ok]: Scripts can handle commands with incorrect arity (7 ms) [ok]: Correct handling of reused argv (issue #1939) (4 ms) [ok]: Functions in the Redis namespace are able to report errors (2 ms) [ok]: CLUSTER RESET can not be invoke from within a script (8 ms) [ok]: Script with RESP3 map (26 ms) [ok]: config during loading (1720 ms) [55/92 done]: unit/lazyfree (2 seconds) Testing unit/pause [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: Script return recursive object (179 ms) [ok]: Test read commands are not blocked by client pause (9 ms) [ok]: Script check unpack with massive arguments (76 ms) [ok]: Script read key with expiration set (10 ms) [ok]: Setup slave (113 ms) [ok]: Script del key with expiration set (10 ms) [ok]: WAIT out of range timeout (milliseconds) (17 ms) [ok]: Script ACL check (20 ms) [ok]: Binary code loading failed (7 ms) [ok]: Try trick global protection 1 (7 ms) [ok]: Try trick global protection 2 (6 ms) [ok]: Try trick global protection 3 (7 ms) [ok]: Try trick global protection 4 (7 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (47 ms) [ok]: Try trick readonly table on redis table (3 ms) [ok]: Try trick readonly table on json table (6 ms) [ok]: Try trick readonly table on cmsgpack table (6 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (431 ms) [ok]: Try trick readonly table on bit table (7 ms) [ok]: Test loadfile are not available (7 ms) [ok]: Test dofile are not available (6 ms) [ok]: Test print are not available (7 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (720 ms) [ok]: CONFIG REWRITE handles rename-command properly (437 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (345 ms) [ok]: Memory efficiency with values in range 16384 (1588 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (136 ms) [56/92 done]: unit/memefficiency (4 seconds) Testing unit/querybuf [ok]: Test write commands are paused by RO (44 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (447 ms) [ok]: Test special commands are paused by RO (47 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (67 ms) [ok]: Test write multi-execs are blocked by pause RO (53 ms) [ok]: Test scripts are blocked by pause RO (37 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (419 ms) [ok]: PSYNC2 #3899 regression: kill first replica (7 ms) [ok]: Test RO scripts are not blocked by pause RO (86 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (3 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (74 ms) [ok]: PSYNC2 #3899 regression: kill first replica (4 ms) [ok]: HyperLogLog sparse encoding stress test (1851 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (66 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (208 ms) [ok]: Test may-replicate commands are rejected in RO scripts (13 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (440 ms) [ok]: Test multiple clients can be queued up and unblocked (24 ms) [ok]: Test clients with syntax errors will get responses immediately (6 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (7 ms) [ok]: Timedout script does not cause a false dead client (113 ms) [ok]: Test both active and passive expires are skipped during client pause (147 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (1021 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1083 ms) [ok]: PSYNC2 #3899 regression: verify consistency (41 ms) [ok]: CONFIG REWRITE handles alias config properly (1002 ms) [57/92 done]: unit/introspection (9 seconds) Testing unit/tls [ok]: Test that client pause starts at the end of a transaction (53 ms) [58/92 done]: unit/bitops (6 seconds) Testing unit/tracking [ok]: Timedout script link is still usable after Lua returns (194 ms) [ok]: Clients are able to enable tracking and redirect it (4 ms) [ok]: The other connection is able to get invalidations (23 ms) [ok]: The client is now able to disable tracking (7 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (3 ms) [ok]: The connection gets invalidation messages about all the keys (3 ms) [ok]: Clients can enable the BCAST mode with prefixes (44 ms) [ok]: Adding prefixes to BCAST mode works (10 ms) [ok]: Tracking NOLOOP mode in standard mode works (23 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (23 ms) [59/92 done]: unit/tls (1 seconds) Testing unit/oom-score-adj [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (491 ms) [ok]: Test when replica paused, offset would not grow (50 ms) [ok]: Test replica offset would grow after unpause (23 ms) [ok]: CONFIG SET oom-score-adj works as expected (66 ms) [ok]: Timedout scripts and unblocked command (375 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (18 ms) [ok]: ziplist implementation: encoding stress testing (7889 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (6 ms) [ok]: CONFIG SET oom score restored on disable (7 ms) [ok]: CONFIG SET oom score relative and absolute (13 ms) [ok]: CONFIG SET out-of-range oom score (7 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (33 ms) [60/92 done]: unit/pause (2 seconds) Testing unit/shutdown [61/92 done]: unit/oom-score-adj (0 seconds) Testing unit/networking [62/92 done]: unit/type/list-3 (51 seconds) Testing unit/client-eviction [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (209 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (5 ms) [ok]: PSYNC2: cluster is consistent after failover (26 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (487 ms) [ok]: client evicted due to large argv (110 ms) [ok]: Before the replica connects we issue two EVAL commands (13 ms) [ok]: client evicted due to large query buf (52 ms) [ok]: CONFIG SET port number (283 ms) [ok]: client evicted due to percentage of maxmemory (67 ms) [ok]: Connect a replica to the master instance (124 ms) [ok]: Now use EVALSHA against the master, with both SHAs (2 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (223 ms) [ok]: Replication of script multiple pushes to list with BLPOP (24 ms) [ok]: EVALSHA replication when first call is readonly (19 ms) [ok]: Lua scripts using SELECT are replicated correctly (4 ms) [ok]: CONFIG SET bind address (180 ms) [ok]: client evicted due to large multi buf (191 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1153 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (46 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (501 ms) [63/92 done]: integration/psync2-reg (23 seconds) Testing unit/violations [ok]: Tracking gets notification of expired keys (1027 ms) [ok]: Tracking gets notification of lazy expired keys (125 ms) [ok]: HELLO 3 reply is correct (2 ms) [ok]: HELLO without protover (15 ms) [ok]: RESP3 based basic invalidation (18 ms) [ok]: RESP3 tracking redirection (20 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (11 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (2 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (0 ms) [ok]: Different clients using different protocols can track the same key (0 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: Invalidation message sent when using OPTOUT option (0 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms) [ok]: Able to redirect to a RESP3 client (1 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: Temp rdb will be deleted in signal handle (239 ms) [ok]: SORT adds integer field to list (34 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (111 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: Tracking invalidation message of eviction keys should be before response (3 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: Tracking gets notification on tracking table key eviction (3 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (2 ms) [ok]: Test ASYNC flushall (2 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (7 ms) [64/92 done]: unit/violations (0 seconds) Testing unit/replybufsize [ok]: CONFIG SET bind-source-addr (720 ms) [ok]: RDB save will be failed in shutdown (114 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (490 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (53 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (4 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (189 ms) [ok]: Tracking info is correct (3 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (2 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (23 ms) [ok]: Regression test for #11715 (7 ms) [ok]: RESP3 based basic invalidation with client reply off (2 ms) [ok]: Clean up rdb same named folder (6 ms) [ok]: RESP2 based basic invalidation with client reply off (43 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (2 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (3 ms) [ok]: Coverage: Basic CLIENT CACHING (24 ms) [ok]: Coverage: Basic CLIENT REPLY (3 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (4 ms) [ok]: Coverage: Basic CLIENT GETREDIR (2 ms) [ok]: query buffer resized correctly (2723 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (160 ms) [ok]: Default bind address configuration handling (402 ms) [ok]: Protected mode works as expected (7 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1143 ms) [ok]: query buffer resized correctly when not idle (70 ms) [65/92 done]: unit/tracking (3 seconds) Testing unit/cluster/announced-endpoints [ok]: WAIT replica multiple clients unblock - reuse last result (83 ms) [ok]: Connect a replica to the master instance (126 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [66/92 done]: unit/networking (2 seconds) Testing unit/cluster/misc [ok]: Test selective replication of certain Redis commands from Lua (10 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (5 ms) [67/92 done]: unit/shutdown (2 seconds) Testing unit/cluster/cli [ok]: verify reply buffer limits (662 ms) [68/92 done]: unit/replybufsize (1 seconds) Testing unit/cluster/scripting [ok]: WAITAOF local copy before fsync (173 ms) [ok]: WAITAOF local copy everysec (406 ms) [ok]: WAITAOF local copy with appendfsync always (28 ms) [ok]: WAITAOF local wait and then stop aof (32 ms) [ok]: WAITAOF local on server with aof disabled (15 ms) [ok]: Test scripting debug protocol parsing (30 ms) [ok]: Test scripting debug lua stack overflow (21 ms) [ok]: WAITAOF local if AOFRW was postponed (384 ms) [ok]: test RESP2/2 big number protocol parsing (3 ms) [ok]: test RESP2/2 malformed big number protocol parsing (3 ms) [ok]: test RESP2/2 map protocol parsing (4 ms) [ok]: test RESP2/2 set protocol parsing (10 ms) [ok]: test RESP2/2 double protocol parsing (3 ms) [ok]: test RESP2/2 null protocol parsing (3 ms) [ok]: test RESP2/2 verbatim protocol parsing (4 ms) [ok]: test RESP2/2 true protocol parsing (3 ms) [ok]: test RESP2/2 false protocol parsing (3 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (13 ms) [ok]: test RESP2/3 big number protocol parsing (3 ms) [ok]: test RESP2/3 malformed big number protocol parsing (3 ms) [ok]: test RESP2/3 map protocol parsing (4 ms) [ok]: test RESP2/3 set protocol parsing (3 ms) [ok]: test RESP2/3 double protocol parsing (3 ms) [ok]: test RESP2/3 null protocol parsing (4 ms) [ok]: test RESP2/3 verbatim protocol parsing (10 ms) [ok]: test RESP2/3 true protocol parsing (3 ms) [ok]: test RESP2/3 false protocol parsing (3 ms) [ok]: test RESP3/2 big number protocol parsing (3 ms) [ok]: test RESP3/2 malformed big number protocol parsing (4 ms) [ok]: test RESP3/2 map protocol parsing (10 ms) [ok]: test RESP3/2 set protocol parsing (3 ms) [ok]: test RESP3/2 double protocol parsing (3 ms) [ok]: test RESP3/2 null protocol parsing (4 ms) [ok]: test RESP3/2 verbatim protocol parsing (3 ms) [ok]: test RESP3/2 true protocol parsing (3 ms) [ok]: test RESP3/2 false protocol parsing (10 ms) [ok]: test RESP3/3 big number protocol parsing (3 ms) [ok]: test RESP3/3 malformed big number protocol parsing (3 ms) [ok]: test RESP3/3 map protocol parsing (7 ms) [ok]: test RESP3/3 set protocol parsing (3 ms) [ok]: test RESP3/3 double protocol parsing (3 ms) [ok]: test RESP3/3 null protocol parsing (4 ms) [ok]: test RESP3/3 verbatim protocol parsing (3 ms) [ok]: test RESP3/3 true protocol parsing (10 ms) [ok]: test RESP3/3 false protocol parsing (3 ms) [ok]: test resp3 attribute protocol parsing (3 ms) [ok]: Script block the time during execution (20 ms) [ok]: Script delete the expired key (23 ms) [ok]: WAITAOF replica copy before fsync (95 ms) [ok]: TIME command using cached time (20 ms) [ok]: Script block the time in some expiration related commands (111 ms) [ok]: RESTORE expired keys with expiration time (23 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (16 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (17 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (3 ms) [ok]: Function no-cluster flag (13 ms) [ok]: Script no-cluster flag (3 ms) [ok]: Shebang support for lua engine (3 ms) [ok]: Unknown shebang option (4 ms) [ok]: Unknown shebang flag (3 ms) [69/92 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/hostnames [ok]: allow-oom shebang flag (47 ms) [ok]: no-writes shebang flag (3 ms) [ok]: Create 3 node cluster (1863 ms) [ok]: Run blocking command on cluster node3 (7 ms) [ok]: Perform a Resharding (103 ms) [ok]: Verify command got unblocked after resharding (53 ms) [ok]: no-writes shebang flag on replica (165 ms) [ok]: Key lazy expires during key migration (46 ms) [ok]: Coverage: Basic cluster commands (13 ms) [ok]: query buffer resized correctly with fat argv (2918 ms) [ok]: Wait for cluster to be stable (168 ms) [70/92 done]: unit/querybuf (6 seconds) Testing unit/cluster/human-announced-nodename [ok]: not enough good replicas (23 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (76 ms) [ok]: Sanity test push cmd after resharding (4 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (160 ms) [ok]: Run blocking command again on cluster node1 (7 ms) [ok]: Test change cluster-announce-bus-port at runtime (180 ms) [ok]: CONFIG SET port updates cluster-announced port (22 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: AOF rewrite during write load: RDB preamble=no (38695 ms) [ok]: PSYNC2: cluster is consistent after load (x = 44504) (27 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (26 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (6 ms) [ok]: WAITAOF replica copy everysec (1730 ms) [ok]: Client output buffer hard limit is enforced (12034 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (3 ms) [71/92 done]: unit/cluster/misc (3 seconds) Testing unit/cluster/multi-slot-operations [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9410 ms) [72/92 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/slot-ownership [ok]: not enough good replicas state change during long script (939 ms) [ok]: allow-stale shebang flag (60 ms) [ok]: Turning off AOF kills the background writing child if any (117 ms) [ok]: AOF rewrite of list with listpack encoding, string data (183 ms) [ok]: reject script do not cause a Lua stack leak (220 ms) [ok]: Slave should be able to synchronize with the master (129 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1046 ms) [ok]: client evicted due to watched key list (5923 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (3 ms) [ok]: Consistent eval error reporting (304 ms) [ok]: LUA redis.error_reply API (20 ms) [ok]: LUA redis.error_reply API with empty string (16 ms) [ok]: LUA redis.status_reply API (17 ms) [ok]: LUA test pcall (7 ms) [ok]: LUA test pcall with error (7 ms) [ok]: Kill a cluster node and wait for fail state (1913 ms) [ok]: LUA test pcall with non string/integer arg (10 ms) [ok]: LUA test trim string as expected (6 ms) [ok]: Verify command got unblocked after cluster failure (33 ms) [73/92 done]: unit/scripting (19 seconds) Testing unit/cluster/links [ok]: Set cluster human announced nodename and let it propagate (156 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (1 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (1700 ms) [ok]: client evicted due to pubsub subscriptions (1188 ms) [ok]: Set cluster hostnames and verify they are propagated (240 ms) [ok]: AOF rewrite of list with listpack encoding, int data (165 ms) [ok]: client evicted due to tracking redirection (212 ms) [ok]: Update hostnames and make sure they are all eventually propagated (256 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (228 ms) [ok]: AOF rewrite of set with intset encoding, string data (104 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (136 ms) [ok]: Detect write load to master (2010 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (320 ms) [ok]: AOF rewrite of set with intset encoding, int data (123 ms) [ok]: Continuous slots distribution (93 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (15 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (2 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (3 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (26 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2086 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (243 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (223 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (131 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (366 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (118 ms) [74/92 done]: unit/cluster/multi-slot-operations (4 seconds) Testing unit/cluster/cluster-response-tls [75/92 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: AOF rewrite of hash with hashtable encoding, string data (251 ms) [76/92 done]: unit/cluster/slot-ownership (4 seconds) Testing unit/cluster/sharded-pubsub [ok]: Broadcast message across a cluster shard while a cluster link is down (127 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (243 ms) [ok]: WAITAOF replica copy appendfsync always (890 ms) [ok]: PSYNC2: cluster is consistent after failover (24 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4210 ms) [ok]: WAITAOF replica copy if replica is blocked (1063 ms) [ok]: Human nodenames are visible in log messages (3623 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3231 ms) [77/92 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1034 ms) [ok]: Sharded pubsub publish behavior within multi/exec (20 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (13 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (13 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (8 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (12 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (8 ms) [ok]: WAITAOF on promoted replica (199 ms) [ok]: Each node has two links with each peer (30 ms) [ok]: Validate cluster links format (3 ms) [78/92 done]: unit/cluster/sharded-pubsub (3 seconds) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (4146 ms) [ok]: Test restart will keep hostname information (287 ms) [ok]: Test hostname validation (16 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (4114 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (126 ms) [79/92 done]: unit/cluster/hostnames (10 seconds) [ok]: WAITAOF master that loses a replica and backlog is dropped (2030 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (419 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (15730 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (104 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (196 ms) [ok]: AOF rewrite functions (103 ms) [ok]: Verify that single primary marks replica as failed (3234 ms) [ok]: PSYNC2: generate load while killing replication links (5002 ms) [ok]: PSYNC2: cluster is consistent after load (x = 65765) (26 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (222 ms) [ok]: BGREWRITEAOF is refused if already in progress (16 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (28 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (847 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [80/92 done]: unit/aofrw (63 seconds) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (9 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (6 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (6 ms) [ok]: WAITAOF master isn't configured to do AOF (1030 ms) [ok]: WAITAOF replica isn't configured to do AOF (110 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (6 ms) [ok]: Migrate the last slot away from a node using redis-cli (4936 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (933 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (13 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9295 ms) [ok]: PSYNC2: cluster is consistent after failover (40 ms) [ok]: WAITAOF master sends PING after last write (1210 ms) [ok]: client evicted due to client tracking prefixes (10224 ms) [ok]: client evicted due to output buf (15 ms) [ok]: client no-evict on (94 ms) [ok]: client no-evict off (80 ms) [ok]: Slave should be able to synchronize with the master (240 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (9006 ms) [ok]: avoid client eviction when client is freed by output buffer limit (157 ms) [ok]: No response for single command if client output buffer hard limit is enforced (119 ms) [ok]: WAITAOF master client didn't send any write command (1220 ms) [ok]: redis-cli --cluster create with cluster-port (1984 ms) [ok]: GEOSEARCH fuzzy test - byradius (24158 ms) [ok]: decrease maxmemory-clients causes client eviction (700 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1050 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (13 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (20 ms) [ok]: Obuf limit, KEYS stopped mid-run (83 ms) [81/92 done]: unit/obuf-limits (27 seconds) [ok]: evict clients only until below limit (326 ms) [ok]: WAITAOF master client didn't send any command (1213 ms) [ok]: evict clients in right order (large to small) (364 ms) [ok]: redis-cli --cluster add-node with cluster-port (1466 ms) [ok]: client total memory grows during client no-evict (243 ms) [82/92 done]: unit/cluster/cli (19 seconds) [ok]: client total memory grows during maxmemory-clients disabled (171 ms) [83/92 done]: unit/client-eviction (22 seconds) [ok]: Detect write load to master (4034 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (56 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 98949) (13 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (4 ms) [ok]: PSYNC2: Bring the master back again for next test (3 ms) [ok]: Slave should be able to synchronize with the master (120 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (194 ms) [ok]: Verify that multiple primaries mark replica as failed (6350 ms) [84/92 done]: unit/cluster/failure-marking (15 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3719 ms) [ok]: Detect write load to master (1002 ms) [85/92 done]: integration/psync2 (46 seconds) [ok]: Disconnect link when send buffer limit reached (12850 ms) [ok]: Link memory increases with publishes (609 ms) [ok]: Link memory resets after publish messages flush (456 ms) [86/92 done]: unit/cluster/links (19 seconds) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2423 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1392 ms) [ok]: setup replication for following tests (133 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (839 ms) [87/92 done]: unit/wait (32 seconds) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6327 ms) [ok]: slave buffer are counted correctly (29056 ms) [ok]: Slave should be able to synchronize with the master (130 ms) [ok]: Detect write load to master (2014 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (19157 ms) [ok]: GEOSEARCH fuzzy test - bybox (16169 ms) [ok]: GEOSEARCH box edges fuzzy test (103 ms) [88/92 done]: unit/geo (42 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7976 ms) [ok]: Slave should be able to synchronize with the master (134 ms) [ok]: Detect write load to master (1013 ms) [ok]: replica buffer don't induce eviction (12071 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (291 ms) [ok]: client tracking don't cause eviction feedback loop (2127 ms) [ok]: propagation with eviction (96 ms) [ok]: propagation with eviction in MULTI (91 ms) [ok]: lru/lfu value of the key just added (19 ms) [89/92 done]: unit/maxmemory (58 seconds) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9425 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (17142 ms) [ok]: Slave should be able to synchronize with the master (120 ms) [ok]: Detect write load to master (1001 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (56813 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (0 ms) [ok]: PFMERGE results on the cardinality of union of sets (1 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3791 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9440 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (3780 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (670 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [90/92 done]: unit/hyperloglog (69 seconds) [ok]: Slave should be able to synchronize with the master (1743 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (19 ms) [ok]: Slave should be able to synchronize with the master (906 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6361 ms) [ok]: Slave should be able to synchronize with the master (814 ms) [ok]: Detect write load to master (6 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7982 ms) [ok]: Slave should be able to synchronize with the master (1900 ms) [ok]: Detect write load to master (7 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (32430 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (10 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (476 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (13 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (13 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (670 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (1145 ms) [ok]: Busy script during async loading (892 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9453 ms) [ok]: Blocked commands and configs during async-loading (492 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (16 ms) Waiting for process 47097 to exit... Waiting for process 47097 to exit... Waiting for process 47097 to exit... Waiting for process 47097 to exit... [ok]: Slave should be able to synchronize with the master (7214 ms) [ok]: Detect write load to master (0 ms) Waiting for process 47097 to exit... [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (10383 ms) [ok]: Slave should be able to synchronize with the master (1973 ms) [ok]: Detect write load to master (7 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (56 ms) [ok]: Slave should be able to synchronize with the master (780 ms) [ok]: Detect write load to master (6 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6433 ms) [ok]: Slave should be able to synchronize with the master (1897 ms) [ok]: Detect write load to master (7 ms) Waiting for process 47708 to exit... Waiting for process 47708 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7956 ms) [ok]: diskless loading short read (30272 ms) [ok]: Slave should be able to synchronize with the master (760 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9429 ms) [ok]: diskless no replicas drop during rdb pipe (10627 ms) [ok]: Slave should be able to synchronize with the master (916 ms) [ok]: Detect write load to master (7 ms) [ok]: diskless slow replicas drop during rdb pipe (3153 ms) [ok]: diskless fast replicas drop during rdb pipe (6707 ms) [ok]: diskless all replicas drop during rdb pipe (1224 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10483 ms) [91/92 done]: integration/replication-psync (190 seconds) [ok]: diskless timeout replicas drop during rdb pipe (6869 ms) [ok]: diskless replication child being killed is collected (1560 ms) [ok]: replication child dies when parent is killed - diskless: yes (2300 ms) [ok]: replication child dies when parent is killed - diskless: no (2856 ms) [ok]: diskless replication read pipe cleanup (838 ms) [ok]: replicaof right after disconnection (1852 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (1413 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (25 ms) [ok]: Discard cache master before loading transferred RDB when full sync (190 ms) [ok]: replica can handle EINTR if use diskless load (851 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (107 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (113 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (77 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (120 ms) [ok]: PSYNC with wrong offset should throw error (6 ms) [ok]: Test replication with lazy expire (139 ms) [92/92 done]: integration/replication (217 seconds) Testing solo test [92/92 done]: list-large-memory (0 seconds) Testing solo test [92/92 done]: set-large-memory (0 seconds) Testing solo test [92/92 done]: defrag (3 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [92/92 done]: bitops-large-memory (0 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [92/92 done]: violations (1 seconds) The End Execution time of different units: 0 seconds - unit/printver 0 seconds - unit/info-command 1 seconds - unit/type/incr 1 seconds - unit/protocol 2 seconds - unit/auth 3 seconds - unit/keyspace 3 seconds - unit/info 0 seconds - unit/quit 6 seconds - unit/type/hash 8 seconds - unit/type/stream-cgroups 6 seconds - unit/multi 9 seconds - unit/sort 2 seconds - unit/acl-v2 11 seconds - unit/type/string 6 seconds - unit/acl 14 seconds - unit/scan 14 seconds - unit/other 15 seconds - unit/expire 17 seconds - unit/type/list-2 17 seconds - unit/type/list 9 seconds - unit/latency-monitor 4 seconds - integration/aof-race 24 seconds - unit/type/set 13 seconds - integration/replication-2 25 seconds - unit/type/stream 27 seconds - unit/dump 15 seconds - integration/replication-3 1 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/convert-zipmap-hash-on-load 12 seconds - integration/shutdown 1 seconds - integration/logging 1 seconds - integration/convert-ziplist-zset-on-load 29 seconds - unit/type/zset 15 seconds - integration/replication-buffer 16 seconds - integration/aof 14 seconds - integration/aof-multi-part 12 seconds - integration/rdb 26 seconds - integration/block-repl 6 seconds - integration/failover 2 seconds - unit/pubsub 2 seconds - unit/pubsubshard 4 seconds - integration/redis-benchmark 2 seconds - unit/slowlog 12 seconds - integration/psync2-master-restart 5 seconds - integration/dismiss-mem 29 seconds - integration/replication-4 20 seconds - integration/corrupt-dump 1 seconds - unit/limits 20 seconds - integration/corrupt-dump-fuzzer 5 seconds - unit/functions 17 seconds - integration/psync2-pingoff 13 seconds - integration/redis-cli 2 seconds - unit/bitfield 8 seconds - unit/introspection-2 2 seconds - unit/lazyfree 4 seconds - unit/memefficiency 9 seconds - unit/introspection 6 seconds - unit/bitops 1 seconds - unit/tls 2 seconds - unit/pause 0 seconds - unit/oom-score-adj 51 seconds - unit/type/list-3 23 seconds - integration/psync2-reg 0 seconds - unit/violations 3 seconds - unit/tracking 2 seconds - unit/networking 2 seconds - unit/shutdown 1 seconds - unit/replybufsize 2 seconds - unit/cluster/scripting 6 seconds - unit/querybuf 3 seconds - unit/cluster/misc 3 seconds - unit/cluster/announced-endpoints 19 seconds - unit/scripting 4 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 6 seconds - unit/cluster/human-announced-nodename 3 seconds - unit/cluster/sharded-pubsub 10 seconds - unit/cluster/hostnames 63 seconds - unit/aofrw 27 seconds - unit/obuf-limits 19 seconds - unit/cluster/cli 22 seconds - unit/client-eviction 15 seconds - unit/cluster/failure-marking 46 seconds - integration/psync2 19 seconds - unit/cluster/links 32 seconds - unit/wait 42 seconds - unit/geo 58 seconds - unit/maxmemory 69 seconds - unit/hyperloglog 190 seconds - integration/replication-psync 217 seconds - integration/replication 0 seconds - list-large-memory 0 seconds - set-large-memory 3 seconds - defrag 0 seconds - bitops-large-memory 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.9/src' >>> redis-openrc*: Running split function openrc... >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.9-r0.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 28.0 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.9-r0.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-armv7.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 >>> redis*: Package size: 2.7 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.9-r0.apk >>> redis: Build complete at Fri, 30 May 2025 00:29:55 +0000 elapsed time 0h 4m 13s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20250530.002543) (2/8) Purging linux-headers (6.6-r0) (3/8) Purging openssl-dev (3.3.3-r0) (4/8) Purging tcl (8.6.14-r1) (5/8) Purging tzdata (2025b-r0) (6/8) Purging procps-ng (4.0.4-r0) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r0) Executing busybox-1.36.1-r29.trigger OK: 270 MiB in 103 packages >>> redis: Updating the community/armv7 repository index... >>> redis: Signing the index...