>>> redis: Building community/redis 7.2.5-r1 (using abuild 3.13.0-r3) started Tue, 01 Oct 2024 19:03:07 +0000 >>> redis: Checking sanity of /home/buildozer/aports/community/redis/APKBUILD... >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r0) (2/8) Installing openssl-dev (3.3.2-r0) (3/8) Installing tzdata (2024b-r0) (4/8) Installing tcl (8.6.14-r1) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r0) (7/8) Installing procps-ng (4.0.4-r0) (8/8) Installing .makedepends-redis (20241001.190307) Executing busybox-1.36.1-r29.trigger OK: 434 MiB in 111 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redis-7.2.5.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redis-7.2.5.tar.gz >>> redis: Checking sha512sums... redis-7.2.5.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK CVE-2024-31227.patch: OK CVE-2024-31228.patch: OK CVE-2024-31449.patch: OK >>> redis: Unpacking /var/cache/distfiles/v3.20/redis-7.2.5.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). >>> redis: CVE-2024-31227.patch patching file src/acl.c Hunk #1 succeeded at 1051 (offset -22 lines). patching file tests/unit/acl-v2.tcl Hunk #1 succeeded at 116 (offset -6 lines). >>> redis: CVE-2024-31228.patch patching file src/util.c Hunk #1 succeeded at 54 (offset 21 lines). Hunk #2 succeeded at 70 (offset 21 lines). Hunk #3 succeeded at 192 (offset 21 lines). patching file tests/unit/keyspace.tcl >>> redis: CVE-2024-31449.patch patching file deps/lua/src/lua_bit.c patching file tests/unit/scripting.tcl Hunk #1 succeeded at 613 (offset -86 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" > .make-ldflags) MAKE hiredis MAKE linenoise cd hiredis && make static USE_SSL=1 cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hiredis' MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/fpconv' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/linenoise' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hdr_histogram' ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs luac.o print.o liblua.a -lm ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC siphash.o CC defrag.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC tls.o CC sha256.o CC timeout.o CC monotonic.o CC socket.o CC setcpuaffinity.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o LINK redis-benchmark LINK redis-server LINK redis-cli INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 23601 Testing unit/printver [ready]: 23602 Testing unit/dump [ready]: 23607 Testing unit/auth [ready]: 23606 Testing unit/protocol [ready]: 23609 Testing unit/keyspace [ready]: 23612 Testing unit/scan [ready]: 23613 Testing unit/info [ready]: 23605 Testing unit/info-command [ready]: 23604 Testing unit/type/string [ready]: 23608 Testing unit/type/incr [ready]: 23610 Testing unit/type/list [ready]: 23616 Testing unit/type/list-2 [ready]: 23611 Testing unit/type/list-3 [ready]: 23603 Testing unit/type/set [ready]: 23614 Testing unit/type/zset [ready]: 23615 Testing unit/type/hash Testing Redis version 7.2.5 (00000000) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (1 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: DEL against a single item (2 ms) [ok]: info command with at most one sub command (2 ms) [ok]: SET and GET an item (1 ms) [ok]: INCR against non existing key (1 ms) [ok]: SET and GET an empty item (0 ms) [ok]: info command with one sub-section (0 ms) [ok]: INCR against key created by incr itself (1 ms) [ok]: Vararg DEL (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: KEYS with pattern (2 ms) [ok]: INCR over 32bit value (1 ms) [ok]: KEYS to get all keys (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: DBSIZE (0 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: INCR fails against key with spaces (left) (1 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (1 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: DEL all keys (1 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: Explicit regression for a list bug (1 ms) [ok]: INCR fails against a key holding a list (1 ms) [ok]: RESTORE can set LFU (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (1 ms) [ok]: RESTORE returns an error of the key already exists (1 ms) [ok]: reg node check compression with insert and pop (2 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (2 ms) [ok]: reg node check compression combined with trim (0 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: HSET/HLEN - Small hash creation (2 ms) [ok]: reg node check compression with lset (1 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (1 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (1 ms) [ok]: plain node check compression (3 ms) [ok]: Check encoding - listpack (1 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (1 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: plain node check compression using lset (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: No negative zero (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: ZADD XX option without key - listpack (1 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (1 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: HRANDFIELD - listpack (11 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (17 ms) [ok]: ZADD INCR LT/GT with inf - listpack (2 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (1 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (1 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: SADD against non set (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (1 ms) [ok]: SADD a non-integer against a small intset (1 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: ZRANGE basics - listpack (3 ms) [ok]: HRANDFIELD - hashtable (11 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: HRANDFIELD count overflow (1 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZRANK/ZREVRANK basics - listpack (3 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: SADD a non-integer against a large intset (13 ms) [ok]: Handle an empty query (46 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (5 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (2 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (3 ms) [ok]: SADD an integer larger than 64 bits to a large intset (13 ms) [ok]: ZLEXCOUNT advanced - listpack (2 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (3 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (12 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: ZREMRANGEBYRANK basics - listpack (5 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (82 ms) [ok]: DUMP of non existing key returns nil (1 ms) [ok]: ZREMRANGEBYLEX basics - listpack (13 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: Negative multibulk length (50 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [1/91 done]: unit/type/incr (0 seconds) Testing unit/type/stream [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (2 ms) [ok]: Generic wrong number of args (1 ms) [2/91 done]: unit/printver (0 seconds) Testing unit/type/stream-cgroups [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: Unbalanced number of quotes (1 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (1 ms) [3/91 done]: unit/info-command (0 seconds) Testing unit/sort [ok]: ZINTER basics - listpack (0 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (47 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (1 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: SCAN basic (112 ms) [ok]: ZDIFF basics - listpack (1 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (13 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (3 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: latencystats: disable/enable (3 ms) [ok]: latencystats: configure percentiles (3 ms) [ok]: latencystats: bad configure percentiles (3 ms) [ok]: latencystats: blocking commands (4 ms) [ok]: latencystats: subcommands (2 ms) [ok]: Very big payload in GET/SET (113 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (44 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (2 ms) [ok]: Variadic SADD (1 ms) [ok]: Regression for quicklist #3343 bug (167 ms) [ok]: latencystats: measure latency (52 ms) [ok]: errorstats: failed call authentication error (2 ms) [ok]: errorstats: failed call within MULTI/EXEC (3 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: errorstats: rejected call unknown command (2 ms) [ok]: errorstats: rejected call within MULTI/EXEC (4 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: errorstats: rejected call by OOM error (2 ms) [ok]: errorstats: rejected call by authorization error (3 ms) [ok]: errorstats: blocking commands (3 ms) [ok]: AUTH fails when a wrong password is given (1 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: Protocol desync regression test #1 (120 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (2 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (1 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XREADGROUP can read the history of the elements we own (2 ms) [ok]: Test LPUSH and LPOP on plain nodes (3 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: Check compression with recompress (50 ms) [ok]: XPENDING can return single consumer items (1 ms) [ok]: XPENDING only group (0 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: SCAN COUNT (119 ms) [ok]: XPENDING with IDLE (21 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: HRANDFIELD with - hashtable (208 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (2 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (2 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (23 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (2 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (2 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (2 ms) [ok]: XREAD and XREADGROUP against wrong parameter (0 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (1 ms) [ok]: MIGRATE is caching connections (218 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (24 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (5 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (4 ms) [ok]: Protocol desync regression test #2 (104 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (2 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: XADD with MAXLEN option (114 ms) [ok]: Set encoding after DEBUG RELOAD (169 ms) [ok]: SREM basics - $type (0 ms) [ok]: SCAN MATCH (110 ms) [ok]: SREM basics - $type (14 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Test LSET with packed / plain combinations (154 ms) [ok]: Test LSET with packed is split in the middle (3 ms) [ok]: Protocol desync regression test #3 (70 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (4 ms) [ok]: SUNION with two sets - regular (13 ms) [ok]: AUTH fails when binary password is wrong (1 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: HRANDFIELD with - listpack (192 ms) [ok]: SUNIONSTORE with two sets - regular (13 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (0 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: test large number of args (52 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: SUNION with non existing keys - regular (13 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (10 ms) [ok]: Crash due to wrongly recompress after lrem (268 ms) [ok]: XADD with MAXLEN option and the '=' argument (171 ms) [ok]: SCAN TYPE (165 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (4 ms) [ok]: SUNION with two sets - intset (13 ms) [ok]: SUNIONSTORE with two sets - intset (12 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (61 ms) [ok]: SUNION with non existing keys - intset (12 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (1 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (10 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: HSET/HLEN - Big hash creation (146 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: Quicklist: SORT BY key (20 ms) [ok]: HGET against the small hash (1 ms) [ok]: Quicklist: SORT BY key with limit (2 ms) [ok]: Test LSET with packed consist only one item (207 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (50 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (27 ms) [ok]: SUNION hashtable and listpack (2 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (1 ms) [ok]: Quicklist: SORT BY hash field (20 ms) [ok]: Regression for a crash with blocking ops and pipelining (0 ms) [ok]: SCAN unknown type (111 ms) [ok]: XADD with MAXLEN option and the '~' argument (136 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: HGET against the big hash (99 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (1 ms) [ok]: HMSET - small hash (0 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: SCAN with expired keys (126 ms) [ok]: HMSET - big hash (65 ms) [ok]: HMGET against non existing key and fields (1 ms) [ok]: Hash commands against wrong type (2 ms) [ok]: HMGET - small hash (0 ms) [ok]: XADD with MINID option (123 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: LPOS basic usage - quicklist (44 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: HMGET - big hash (63 ms) [ok]: HKEYS - small hash (0 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: HKEYS - big hash (19 ms) [ok]: HVALS - small hash (0 ms) [ok]: SCAN with expired keys with TYPE filter (113 ms) [ok]: HVALS - big hash (3 ms) [ok]: HGETALL - small hash (1 ms) [ok]: SSCAN with encoding intset (2 ms) [ok]: SSCAN with encoding listpack (2 ms) [ok]: SSCAN with encoding hashtable (6 ms) [ok]: HSCAN with encoding listpack (2 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (97 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: HGETALL - big hash (39 ms) [ok]: HDEL and return value (0 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (1 ms) [ok]: HEXISTS (0 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (1 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY against non existing hash key (1 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (1 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (1 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (1 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (50 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (2 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (1 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (0 ms) [ok]: HSCAN with encoding hashtable (104 ms) [ok]: ZSCAN with encoding listpack (2 ms) [ok]: BLPOP: single existing list - quicklist (48 ms) [ok]: HSTRLEN against the big hash (91 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (3 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (2 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: Hash fuzzing #1 - 10 fields (39 ms) [ok]: ZSCAN with encoding skiplist (98 ms) [ok]: Hash fuzzing #2 - 10 fields (31 ms) [ok]: BLPOP: multiple existing lists - quicklist (100 ms) [ok]: SCAN guarantees check under write load (26 ms) [ok]: SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: HSCAN with PATTERN (1 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (1 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (1 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (2 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (2 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: BLPOP: second list has an entry - quicklist (50 ms) [ok]: COPY basic usage for list - quicklist (52 ms) [ok]: COPY basic usage for list - listpack (2 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (2 ms) [ok]: ZSCAN scores: regression test for issue #2175 (79 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (50 ms) [ok]: COPY basic usage for $type set (24 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (18 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: COPY basic usage for hashtable hash (32 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (100 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (50 ms) [ok]: BRPOPLPUSH - quicklist (50 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1091 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (3 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: COPY basic usage for stream (169 ms) [ok]: COPY basic usage for stream-cgroups (12 ms) [ok]: MOVE basic usage (0 ms) [ok]: MOVE against key existing in the target DB (1 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (1 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: BLMOVE left left - quicklist (50 ms) [ok]: RANDOMKEY (10 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (1 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: MASTERAUTH test with binary password (908 ms) [ok]: BLMOVE left right - quicklist (50 ms) [ok]: BLMOVE right left - quicklist (50 ms) [ok]: Regression for pattern matching very long nested loops (100 ms) [ok]: BLMOVE right right - quicklist (50 ms) [ok]: BLPOP: single existing list - listpack (2 ms) [ok]: BLPOP: multiple existing lists - listpack (2 ms) [ok]: BLPOP: second list has an entry - listpack (2 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [5/91 done]: unit/keyspace (2 seconds) Testing unit/other [ok]: BLMPOP_LEFT: multiple existing lists - listpack (3 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (2 ms) [ok]: BLMOVE right left - listpack (2 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (2 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (2 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (2 ms) [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [ok]: BLMPOP with multiple blocked clients (4 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (2 ms) [ok]: Coverage: HELP commands (5 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: SAVE - make sure there are all the types as values (3 ms) [ok]: MULTI / EXEC basics (2 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (1 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (2 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (1 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (4 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (4 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (4 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (0 ms) [ok]: stats: instantaneous metrics (1602 ms) [ok]: XCLAIM can claim PEL items from another consumer (604 ms) [ok]: stats: debug metrics (112 ms) [7/91 done]: unit/info (2 seconds) Testing unit/quit [ok]: QUIT returns OK (1 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [8/91 done]: unit/quit (1 seconds) Testing unit/aofrw [ok]: XCLAIM without JUSTID increments delivery count (403 ms) [ok]: XCLAIM same consumer (202 ms) [ok]: BRPOPLPUSH timeout (1013 ms) [ok]: SWAPDB awakes blocked client (2 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (173 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (1 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (1 ms) [ok]: FUZZ stresser with data model binary (1235 ms) [ok]: WATCH will consider touched expired keys (1106 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: MULTI / EXEC is not propagated (single write command) (43 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (299 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (100 ms) [ok]: Hash fuzzing #1 - 512 fields (2102 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (604 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (101 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (99 ms) [ok]: XAUTOCLAIM as an iterator (204 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (2 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (2 ms) [ok]: XADD mass insertion and XLEN (2678 ms) [ok]: XAUTOCLAIM with XDEL and count (3 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (1 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: XINFO FULL output (8 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: MULTI / EXEC with REPLICAOF (102 ms) [ok]: Consumer seen-time and active-time (209 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (3 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: XREADGROUP with NOACK creates consumer (4 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (106 ms) [ok]: Consumer group read counter and lag in empty streams (2 ms) [ok]: Consumer group read counter and lag sanity (11 ms) [ok]: Consumer group lag with XDELs (20 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (3 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: SETEX - Wait for the key to expire (1100 ms) [ok]: SETEX - Wrong time parameter (1 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: MULTI and script timeout (406 ms) [ok]: FUZZ stresser with data model alpha (1110 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BLPOP when new key is moved into place (2 ms) [ok]: BLPOP when result key is created by SORT..STORE (2 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (2 ms) [ok]: BLPOP: timeout value out of range (1 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: XRANGE can be used to iterate the whole stream (764 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (105 ms) [ok]: Big Quicklist: SORT BY key (579 ms) [ok]: Big Quicklist: SORT BY key with limit (13 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (103 ms) [ok]: EXEC and script timeout (408 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (106 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (5 ms) [ok]: Hash fuzzing #2 - 512 fields (1550 ms) [ok]: Big Quicklist: SORT BY hash field (589 ms) [ok]: MULTI-EXEC body and script timeout (406 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (1 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (105 ms) [9/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/acl [ok]: EXPIRE precision is now the millisecond (1102 ms) [ok]: Very big payload random access (5072 ms) [ok]: PSETEX can set sub-second expires (101 ms) [ok]: BLPOP: timeout (1067 ms) [ok]: BLPOP: arguments are empty (3 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (0 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (1 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (0 ms) [ok]: BRPOP: with non-integer timeout (2 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (1 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (0 ms) [ok]: Hash table: SORT BY key (21 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: By default, only default user is able to subscribe to any shard channel (2 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (1 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (1 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (2 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: Hash table: SORT BY hash field (20 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: ACLs can exclude single subcommands, case 2 (0 ms) [ok]: ACLs cannot include a subcommand with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (1 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (2 ms) [ok]: just EXEC and script timeout (404 ms) [ok]: exec with write commands and state change (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (3 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (2 ms) [ok]: ACL GETUSER provides reasonable results (20 ms) [ok]: ACL GETUSER provides correct results (6 ms) [ok]: ACL CAT with illegal arguments (1 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (2 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (1 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (7 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (2 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (2 ms) [ok]: ACL can log errors in the context of Lua scripting (2 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (2 ms) [ok]: PEXPIRE can set sub-second expires (101 ms) [ok]: ACL LOG can log failed auth attempts (2 ms) [ok]: ACL LOG entries are limited to a maximum amount (3 ms) [ok]: When default user is off, new connections are not authenticated (1 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (1 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (4 ms) [ok]: ACL-Metrics invalid command accesses (2 ms) [ok]: ACL-Metrics invalid key accesses (3 ms) [ok]: ACL-Metrics invalid channels accesses (3 ms) [ok]: FUZZ stresser with data model compr (1305 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (2 ms) [ok]: PEXPIREAT can set sub-second expires (204 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (1 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (1 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (1 ms) [ok]: ACL load and save (3 ms) [ok]: ACL load and save with restricted channels (2 ms) [ok]: BGSAVE (54 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: Redis should actively expire keys incrementally (603 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (1 ms) [ok]: BRPOP: timeout (1072 ms) [ok]: BRPOP: arguments are empty (3 ms) [ok]: BLMPOP_LEFT: with single empty list argument (2 ms) [ok]: BLMPOP_LEFT: with negative timeout (0 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: ZDIFF fuzzing - listpack (6321 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (3 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (2 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (2 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (3 ms) [ok]: XREVRANGE returns the reverse of XRANGE (2263 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (1 ms) [ok]: XRANGE exclusive ranges (4 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (1 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (1 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (3 ms) [ok]: ZREVRANGE basics - skiplist (2 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (3 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (1 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (5 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (5 ms) [ok]: ZLEXCOUNT advanced - skiplist (2 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (3 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (15 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (6 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (17 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (2 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (2 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (1 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - skiplist (1 ms) [ok]: ZINTER RESP3 - skiplist (1 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (2 ms) [ok]: Test loading an ACL file with duplicate users (4 ms) [ok]: Test loading an ACL file with duplicate default user (4 ms) [ok]: Test loading duplicate users in config on startup (18 ms) [ok]: Check consistency of different data types after a reload (1087 ms) [ok]: Same dataset digest if saving/reloading as AOF? (210 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (105 ms) [ok]: ACL from config file and config rewrite (208 ms) [10/91 done]: unit/acl (2 seconds) Testing unit/acl-v2 [ok]: Redis should lazy expire keys (1003 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (1 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (2 ms) [ok]: Test separate read permission (1 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: Validate read and write permissions format (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (0 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (3 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: Test various odd commands for key permissions (4 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (2 ms) [ok]: Cardinality commands require some type of permission to execute (2 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (2 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (2681 ms) [ok]: SDIFF fuzzing (6835 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (1 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (2 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (2 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (1 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: BLMPOP_LEFT: timeout (1071 ms) [ok]: SUNIONSTORE should handle non existing key as empty (2 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: BLMPOP_LEFT: arguments are empty (2 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (0 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (0 ms) [ok]: SRANDMEMBER - listpack (10 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (1 ms) [ok]: SRANDMEMBER - intset (10 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: SPOP with - listpack (5 ms) [ok]: SPOP with - intset (4 ms) [ok]: SPOP with - hashtable (4 ms) [ok]: Test behavior of loading ACLs (1 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (4 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (3 ms) [ok]: SPOP new implementation: code path #2 intset (3 ms) [ok]: SPOP new implementation: code path #3 intset (3 ms) [ok]: SPOP new implementation: code path #1 listpack (2 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (2308 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SPOP new implementation: code path #2 listpack (3 ms) [ok]: SETNX against not-expired volatile key (1 ms) [ok]: SPOP new implementation: code path #3 listpack (3 ms) [ok]: Hash ziplist of various encodings (110 ms) [ok]: Hash ziplist of various encodings - sanitize dump (5 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [11/91 done]: unit/acl-v2 (1 seconds) Testing unit/latency-monitor [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (97 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [12/91 done]: unit/type/hash (8 seconds) Testing integration/block-repl [ok]: SRANDMEMBER with - listpack (35 ms) [ok]: SRANDMEMBER with - intset (27 ms) [ok]: SRANDMEMBER with - hashtable (29 ms) [ok]: LATENCY HISTOGRAM with empty histogram (0 ms) [ok]: LATENCY HISTOGRAM all commands (1 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (2 ms) [ok]: XREAD with non empty second stream (1312 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: exec with read commands and stale replica state change (2505 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (2 ms) [ok]: SRANDMEMBER histogram distribution - listpack (115 ms) [ok]: Blocking XREAD will not reply with an empty array (36 ms) [ok]: MULTI propagation of PUBLISH (96 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD: XADD + DEL should not awake client (2 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: SRANDMEMBER histogram distribution - intset (114 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (2 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (1 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (117 ms) [ok]: MULTI propagation of EVAL (100 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (1 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (1 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (1 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: MULTI propagation of XREADGROUP (102 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: MULTI with BGREWRITEAOF (204 ms) [ok]: BLMPOP_RIGHT: timeout (1074 ms) [ok]: BLMPOP_RIGHT: arguments are empty (2 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: MULTI with config set appendonly (205 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: BLMPOP propagate as pop with count command to replica (198 ms) [ok]: LPUSHX, RPUSHX - generic (0 ms) [ok]: LPUSHX, RPUSHX - quicklist (52 ms) [ok]: First server should have role slave after SLAVEOF (1002 ms) [ok]: LINSERT - quicklist (61 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (2 ms) [ok]: LINSERT raise error on bad syntax (1 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: MULTI with FLUSHALL and AOF (1 ms) [ok]: LINDEX consistency test - listpack (74 ms) [ok]: LINDEX random access - listpack (53 ms) [13/91 done]: unit/multi (7 seconds) Testing integration/replication [ok]: Big Hash table: SORT BY key (532 ms) [ok]: Big Hash table: SORT BY key with limit (13 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (108 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2106 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: LINDEX consistency test - listpack (196 ms) [ok]: LINDEX random access - listpack (124 ms) [ok]: Big Hash table: SORT BY hash field (528 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (1 ms) [ok]: SORT GET (key and hash) with sanity check (4 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (2 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (8 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (1 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (1 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (1 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (220 ms) [ok]: SORT speed, 100 element list BY key, 100 times (37 ms) [ok]: LINDEX consistency test - quicklist (72 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (43 ms) [ok]: SORT speed, 100 element list directly, 100 times (29 ms) [ok]: LINDEX random access - quicklist (50 ms) [ok]: SORT speed, 100 element list BY , 100 times (24 ms) [ok]: SETRANGE with huge offset (3 ms) [14/91 done]: unit/sort (10 seconds) Testing integration/replication-2 [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (101 ms) [ok]: LINDEX consistency test - quicklist (146 ms) [ok]: LINDEX random access - quicklist (105 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (1 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2017 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (244 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (46 ms) [ok]: SETNX against expired volatile key (2940 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (1 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (62 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: LMOVE left left base case - quicklist (60 ms) [ok]: GETDEL propagate as DEL command to replica (65 ms) [ok]: LMOVE left right base case - quicklist (50 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: LMOVE right left base case - quicklist (50 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (9 ms) [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: LMOVE right right base case - quicklist (50 ms) [ok]: MGET (11 ms) [ok]: MGET against non existing key (1 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (1 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (1 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (1 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (1 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (2 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (50 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (50 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (60 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (60 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (291 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (50 ms) [ok]: XDEL fuzz test (2987 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (100 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (100 ms) [ok]: Test latency events logging (3401 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (100 ms) [ok]: SETBIT fuzzing (594 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (0 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (2089 ms) [ok]: APPEND basics (1 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: SETRANGE against integer-encoded key (2 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (0 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: SCAN regression test for issue #4906 (10112 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (100 ms) [15/91 done]: unit/scan (11 seconds) Testing integration/replication-3 [ok]: LMOVE right right with quicklist source and existing target quicklist (100 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (50 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (60 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (50 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (60 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (50 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: APPEND fuzzing (438 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (48 ms) [ok]: FLUSHDB (49 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (1 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (1 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (50 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (50 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (11241 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (50 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (50 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (2 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (2 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (2 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: LTRIM stress testing - quicklist (11969 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (51 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (99 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (2 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (2 ms) [ok]: Mass RPOP/LPOP - listpack (57 ms) [ok]: Mass RPOP/LPOP - listpack (106 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: LMPOP single existing list - quicklist (150 ms) [ok]: LMPOP multiple existing lists - quicklist (200 ms) [ok]: LMPOP single existing list - listpack (4 ms) [ok]: LMPOP multiple existing lists - listpack (4 ms) [ok]: LMPOP propagate as pop with count command to replica (57 ms) [ok]: Don't rehash if redis has child process (731 ms) [ok]: LRANGE basics - quicklist (45 ms) [ok]: LRANGE inverted indexes - quicklist (49 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (50 ms) [ok]: LRANGE out of range negative end index - quicklist (50 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (2 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (0 ms) [ok]: LRANGE against non existing key (1 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: Process title set as expected (1 ms) [ok]: ZDIFF fuzzing - skiplist (6369 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (3 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (2 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2003 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [16/91 done]: unit/other (11 seconds) Testing integration/replication-4 [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (2 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZPOP/ZMPOP against wrong type (2 ms) [ok]: ZMPOP with illegal argument (3 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2819 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: ZMPOP propagate as pop with count command to replica (30 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (2 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (75 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (1 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: Redis should not propagate the read command on lazy expire (93 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (196 ms) [ok]: ZMPOP readraw in RESP3 (3 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: BZMPOP readraw in RESP3 (198 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (2 ms) [ok]: GETRANGE fuzzing (2189 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (1 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (1 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (1 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (1 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (1 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (1 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [17/91 done]: unit/expire (13 seconds) Testing integration/replication-psync [ok]: LTRIM basics - quicklist (605 ms) [18/91 done]: unit/type/string (14 seconds) Testing integration/replication-buffer [ok]: LTRIM out of range negative end index - quicklist (100 ms) [ok]: LSET - quicklist (50 ms) [ok]: LSET out of range index - quicklist (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (198 ms) [ok]: ZMPOP readraw in RESP2 (3 ms) [ok]: LTRIM basics - listpack (19 ms) [ok]: LTRIM out of range negative end index - listpack (3 ms) [ok]: LSET - listpack (2 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (1 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (44 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (48 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (1 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (48 ms) [ok]: LREM remove all the occurrences - listpack (2 ms) [ok]: LREM remove the first occurrence - listpack (1 ms) [ok]: LREM remove non existing element - listpack (1 ms) [ok]: LREM starting from tail with negative count - listpack (2 ms) [ok]: LREM starting from tail with negative count (2) - listpack (1 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (2 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: BLPOP/BLMOVE should increase dirty (5 ms) [ok]: client unblock tests (9 ms) [ok]: client unblock tests (4 ms) [ok]: BZMPOP readraw in RESP2 (198 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (1 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: List listpack -> quicklist encoding conversion (5 ms) [ok]: ZUNIONSTORE result is sorted (162 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (1 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (1 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (2 ms) [ok]: List listpack -> quicklist encoding conversion (195 ms) [ok]: ZSCORE - listpack (40 ms) [ok]: ZMSCORE - listpack (41 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (51 ms) [ok]: ZSET sorting stresser - listpack (63 ms) [ok]: List quicklist -> listpack encoding conversion (259 ms) [ok]: List encoding conversion when RDB loading (5 ms) [ok]: List invalid list-max-listpack-size config (45 ms) [ok]: List of various encodings (105 ms) [ok]: List of various encodings - sanitize dump (5 ms) [ok]: Unblock fairness is kept while pipelining (2 ms) [ok]: Unblock fairness is kept during nested unblock (4 ms) [ok]: Blocking command accounted only once in commandstats (2 ms) [ok]: Blocking command accounted only once in commandstats after timeout (2 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (29 ms) [19/91 done]: unit/type/list (15 seconds) Testing integration/shutdown [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (50 ms) [ok]: MIGRATE cached connections are released after some time (15001 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (12881 ms) [ok]: MIGRATE is able to migrate a key between two instances (221 ms) [ok]: MIGRATE is able to copy a key between two instances (219 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (218 ms) [ok]: All replicas share one global replication buffer (155 ms) [ok]: Replication buffer will become smaller when no replica uses (4 ms) [ok]: MIGRATE propagates TTL correctly (217 ms) [ok]: Detect write load to master (1001 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (2305 ms) [ok]: MASTER and SLAVE consistency with expire (6250 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (115 ms) [ok]: Test replication with parallel clients writing in different DBs (5174 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (4696 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2204 ms) [ok]: Slave is able to detect timeout during handshake (1 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (448 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1986 ms) [ok]: Set instance A as slave of B (101 ms) [ok]: INCRBYFLOAT replication, should not remove expire (2 ms) [ok]: GETSET replication (2 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (2 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (842 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (59 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (9354 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (0 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [20/91 done]: unit/latency-monitor (13 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (1 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: BRPOPLPUSH replication, list exists (1003 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (2 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (1 ms) [ok]: Bad format: Server should have logged an error (2 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (9 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (7 ms) [ok]: Shutting down master waits for replica timeout (2199 ms) [ok]: Short read: Utility should be able to fix the AOF (7 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (1241 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2725 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: AOF+EXPIRE: Server should have been started (0 ms) [ok]: AOF+EXPIRE: List should be empty (1 ms) [ok]: BLMOVE (left, left) replication, list exists (1002 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (0 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (2594 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (10512 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (460 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (2 ms) [ok]: Shutting down master waits for replica then fails (1249 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6253 ms) [ok]: Replication of an expired key does not delete the expired key (518 ms) [ok]: BLMOVE (left, right) replication, list exists (1002 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (1 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: Shutting down master waits for replica then aborted (522 ms) [21/91 done]: integration/shutdown (8 seconds) Testing integration/aof-race [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (2 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (10793 ms) [ok]: BLMOVE (right, left) replication, list exists (1003 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (1 ms) [22/91 done]: integration/aof-race (1 seconds) Testing integration/aof-multi-part [23/91 done]: integration/replication-2 (14 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when some file missing (112 ms) [ok]: XRANGE fuzzing (13038 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (2 ms) [ok]: XADD streamID edge (0 ms) [ok]: Slave is able to evict keys created in writable slaves (6002 ms) [ok]: test old version rdb file (1 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (110 ms) [ok]: XTRIM with MAXLEN option basic test (113 ms) [ok]: XADD with LIMIT consecutive calls (12 ms) [ok]: XTRIM with ~ is limited (12 ms) [ok]: XTRIM without ~ is not limited (13 ms) [ok]: XTRIM without ~ and with LIMIT (12 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: Detect write load to master (1001 ms) [ok]: Writable replica doesn't return expired keys (103 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (16109 ms) [ok]: SMOVE basics - from regular set to intset (3 ms) [ok]: SMOVE basics - from intset to regular set (2 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (2 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (110 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (102 ms) [ok]: RDB encoding loading test (10 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (112 ms) [ok]: LTRIM stress testing - listpack (12369 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (15 ms) [24/91 done]: unit/type/list-2 (24 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (110 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (113 ms) [25/91 done]: integration/replication-3 (14 seconds) Testing integration/corrupt-dump-fuzzer [ok]: ZSCORE - skiplist (23 ms) [ok]: ZMSCORE - skiplist (22 ms) [ok]: XADD with MINID > lastid can propagate correctly (19 ms) [ok]: corrupt payload: #7445 - with sanitize (221 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (26 ms) [ok]: ZSET sorting stresser - skiplist (36 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (112 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (113 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (218 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (18 ms) [ok]: BLMOVE (right, right) replication, list exists (1003 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (112 ms) [ok]: BLPOP followed by role change, issue #2473 (103 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (114 ms) [ok]: corrupt payload: invalid zlbytes header (218 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (19 ms) [ok]: Test RDB stream encoding (145 ms) [ok]: Test RDB stream encoding - sanitize dump (9 ms) [ok]: Multi Part AOF can start when no aof and no manifest (125 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (125 ms) [ok]: corrupt payload: valid zipped hash header, dup records (229 ms) [ok]: Server should not start if RDB file can't be open (1 ms) [ok]: XADD with ~ MINID can propagate correctly (16 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (127 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (0 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (0 ms) [ok]: SET on the master should immediately propagate (0 ms) [ok]: corrupt payload: quicklist big ziplist prev len (220 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (130 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (17 ms) [ok]: FLUSHDB / FLUSHALL should replicate (95 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (127 ms) [ok]: corrupt payload: quicklist small ziplist prev len (221 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (15 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (222 ms) [ok]: corrupt payload: quicklist ziplist wrong count (221 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (1 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (1 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (2 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (222 ms) [ok]: Test FLUSHALL aborts bgsave (649 ms) [ok]: intsets implementation stress testing (1954 ms) [ok]: corrupt payload: #3080 - quicklist (221 ms) [26/91 done]: unit/type/set (26 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (4 ms) [ok]: Maximum XDEL ID behaves correctly (3 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (128 ms) [ok]: bgsave resets the change counter (101 ms) [ok]: MIGRATE can correctly transfer large values (10076 ms) [ok]: RDB load zipmap hash: converts to listpack (0 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (128 ms) [ok]: corrupt payload: quicklist with empty ziplist (218 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (116 ms) [ok]: MIGRATE can correctly transfer hashes (221 ms) [ok]: Empty stream can be rewrite into AOF correctly (105 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (217 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (106 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (4130 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (105 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (216 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [27/91 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (104 ms) [28/91 done]: unit/type/stream (27 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: corrupt payload: #3080 - ziplist (217 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (621 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (110 ms) [ok]: MIGRATE timeout actually works (634 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (2572 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (2 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: client freed during loading (979 ms) [29/91 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/logging [ok]: MIGRATE can migrate multiple keys at once (219 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (225 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (321 ms) [30/91 done]: integration/convert-ziplist-zset-on-load (0 seconds) Testing integration/psync2 [ok]: AOF fsync always barrier issue (5238 ms) [ok]: Crash report generated on SIGABRT (3 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (295 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (128 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [31/91 done]: integration/logging (1 seconds) Testing integration/psync2-reg [ok]: MIGRATE with multiple keys migrate just existing ones (219 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (226 ms) [ok]: GETEX should not append to AOF (1 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (130 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (218 ms) [ok]: corrupt payload: listpack invalid size header (219 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1123 ms) [32/91 done]: integration/replication-buffer (14 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: listpack too long entry len (124 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (419 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (29 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (219 ms) [ok]: Test RDB load info (630 ms) [ok]: corrupt payload: listpack very long entry len (123 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (102 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (217 ms) [ok]: AOF enable will create manifest file (501 ms) [ok]: corrupt payload: listpack too long entry prev len (228 ms) [33/91 done]: unit/dump (28 seconds) Testing integration/psync2-master-restart [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (102 ms) [ok]: corrupt payload: stream with duplicate consumers (220 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (0 ms) [ok]: failed bgsave prevents writes (320 ms) [ok]: corrupt payload: hash ziplist with duplicate records (218 ms) [34/91 done]: integration/rdb (5 seconds) Testing integration/failover [ok]: Generate timestamp annotations in AOF (323 ms) [ok]: PSYNC2 #3899 regression: setup (1006 ms) [ok]: corrupt payload: hash listpack with duplicate records (216 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (971 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (1 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (123 ms) [ok]: PSYNC2 pingoff: setup (1002 ms) [ok]: PSYNC2 pingoff: write and wait replication (0 ms) [ok]: failover command fails without connected replica (1 ms) [ok]: setup replication for following tests (102 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: corrupt payload: hash ziplist uneven record count (218 ms) [ok]: Truncate AOF to specific timestamp (402 ms) [ok]: corrupt payload: hash duplicate records (219 ms) [ok]: corrupt payload: hash empty zipmap (221 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1455 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (126 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1118 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (4 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (3 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (125 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: failover command to specific replica works (744 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (221 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (560 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (220 ms) [ok]: AOF enable/disable auto gc (207 ms) [ok]: AOF can produce consecutive sequence number after reload (128 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (221 ms) [ok]: corrupt payload: fuzzer findings - hash crash (219 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (317 ms) [ok]: failover command to any replica works (932 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (220 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (218 ms) [ok]: failover to a replica with force works (432 ms) [ok]: AOF will trigger limit when AOFRW fails many times (573 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (230 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (9309 ms) [ok]: corrupt payload: fuzzer findings - empty intset (221 ms) [ok]: failover with timeout aborts if replica never catches up (557 ms) [ok]: failovers can be aborted (22 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (220 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7804 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (3 ms) [ok]: BZMPOP with multiple blocked clients (5 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: BZMPOP propagate as pop with count command to replica (178 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (5 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (220 ms) [ok]: PSYNC2 #3899 regression: kill first replica (44 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (219 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1122 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: failover aborts if target rejects sync request (532 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (222 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (218 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (219 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (126 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (222 ms) [ok]: ZSET skiplist order consistency when elements are moved (1288 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (1 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (1 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (10 ms) [ok]: Detect write load to master (1001 ms) [ok]: ZRANDMEMBER - skiplist (10 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (1 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (128 ms) [ok]: PSYNC2 #3899 regression: kill first replica (31 ms) [35/91 done]: integration/failover (5 seconds) Testing integration/redis-cli [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (233 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: ZRANDMEMBER with - skiplist (363 ms) [ok]: Test replication with blocking lists and sorted sets operations (25006 ms) [ok]: Interactive CLI: Status reply (61 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (221 ms) [ok]: Interactive CLI: Bulk reply (61 ms) [36/91 done]: integration/block-repl (26 seconds) Testing integration/redis-benchmark [ok]: PSYNC2 #3899 regression: kill first replica (59 ms) [ok]: Interactive CLI: Multi-bulk reply (61 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (125 ms) [ok]: ZRANDMEMBER with - listpack (354 ms) [ok]: zset score double range (1 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (20 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (8 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (2 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [37/91 done]: unit/type/zset (34 seconds) Testing integration/dismiss-mem [ok]: benchmark: set,get (5 ms) [ok]: benchmark: connecting using URI set,get (5 ms) [ok]: benchmark: connecting using URI with authentication set,get (5 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (219 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2765 ms) [ok]: benchmark: full test suite (107 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9885 ms) [ok]: Interactive CLI: Parsing quotes (425 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (222 ms) [38/91 done]: integration/aof-multi-part (11 seconds) Testing unit/pubsub [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (1 ms) [ok]: PUBLISH/SUBSCRIBE basics (3 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (2 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (2 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (3 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (2 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (2368 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (220 ms) [ok]: PubSub messages with CLIENT REPLY OFF (95 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (2 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (2 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (129 ms) [ok]: Keyspace notifications: we receive keyspace notifications (44 ms) [ok]: benchmark: multi-thread set,get (507 ms) [ok]: Keyspace notifications: we receive keyevent notifications (49 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (2 ms) [ok]: Keyspace notifications: list events test (2 ms) [ok]: Keyspace notifications: set events test (2 ms) [ok]: Keyspace notifications: zset events test (2 ms) [ok]: Keyspace notifications: hash events test (2 ms) [ok]: Keyspace notifications: stream events test (3 ms) [ok]: Interactive CLI: Subscribed mode (605 ms) [ok]: Make the old master a replica of the new one and check conditions (1006 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (221 ms) [ok]: benchmark: pipelined full set,get (228 ms) [ok]: benchmark: arbitrary command (10 ms) [ok]: Keyspace notifications: expired events (triggered expire) (202 ms) [ok]: benchmark: keyspace length (113 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (3 ms) [ok]: Keyspace notifications: expired events (background expire) (165 ms) [ok]: Keyspace notifications: evicted events (2 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (2 ms) [ok]: Keyspace notifications: new key test (2 ms) [ok]: publish to self inside multi (2 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (220 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (2 ms) [39/91 done]: integration/redis-benchmark (1 seconds) Testing unit/pubsubshard [40/91 done]: unit/pubsub (1 seconds) Testing unit/slowlog [ok]: SPUBLISH/SSUBSCRIBE basics (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (2 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (415 ms) [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (6128 ms) [ok]: Non-interactive TTY CLI: Integer reply (1 ms) [ok]: Non-interactive TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (4 ms) [ok]: PSYNC2 #3899 regression: kill first replica (58 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (15 ms) [ok]: corrupt payload: fuzzer findings - huge string (220 ms) [ok]: Non-interactive non-TTY CLI: Status reply (1 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: PubSubShard with CLIENT REPLY OFF (98 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (54 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: dismiss all data types memory (1261 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (17 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (4 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (25 ms) [ok]: PSYNC2 #3899 regression: kill first replica (59 ms) [ok]: EVAL can process writes from AOF in read-only replicas (232 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (200 ms) [ok]: Test redis-check-aof for old style resp AOF (7 ms) [ok]: SLOWLOG - max entries is correctly handled (10 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (7 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (3 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (11 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (229 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (8 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (12 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (7 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (13 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (8 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (125 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (6 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (2 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (3 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (6 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (2 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: setup replication for following tests (102 ms) [ok]: publish message to master and receive on replica (1 ms) [41/91 done]: integration/aof (15 seconds) Testing unit/scripting [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (219 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (202 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (2 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (125 ms) [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (212 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (2 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (2 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (222 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1933 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (219 ms) [ok]: SLOWLOG - can be disabled (402 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (3 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (4 ms) [42/91 done]: unit/pubsubshard (2 seconds) Testing unit/functions [43/91 done]: integration/psync2-master-restart (9 seconds) Testing unit/maxmemory [44/91 done]: unit/slowlog (1 seconds) Testing unit/introspection [ok]: corrupt payload: fuzzer findings - empty zset (219 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (1 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (1 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (1 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (1 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (2 ms) [ok]: FUNCTION - test debug reload different options (3 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (2 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (2 ms) [ok]: FUNCTION - test function dump and restore with replace argument (2 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (1 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 32905) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: PING (1 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (1 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (2 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (3 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (56 ms) [ok]: CLIENT KILL close the client connection during bgsave (96 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (217 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (47 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (50 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (50 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (2 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: MONITOR log blocked command only once (3 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (1 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (1 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (1 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (216 ms) [ok]: FUNCTION - test function kill (407 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (217 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (642 ms) [ok]: FUNCTION - test script kill not working on function (407 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (218 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (123 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (121 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (1 ms) [ok]: AOF rewrite during write load: RDB preamble=no (22528 ms) [ok]: CONFIG save params special case handled properly (867 ms) [ok]: FUNCTION - test function kill not working on eval (406 ms) [ok]: FUNCTION - test function flush (3 ms) [ok]: FUNCTION - test function wrong argument (1 ms) [ok]: CONFIG sanity (28 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (216 ms) [ok]: CONFIG REWRITE sanity (177 ms) [ok]: EVAL does not leak in the Lua stack (1946 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (3 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (3 ms) [ok]: Turning off AOF kills the background writing child if any (105 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (2520 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (218 ms) [ok]: AOF rewrite of list with listpack encoding, string data (105 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: FUNCTION - creation is replicated to replica (1 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (1 ms) [ok]: FUNCTION - flush is replicated to replica (0 ms) [ok]: Dumping an RDB - functions only: no (2952 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (219 ms) [ok]: Disconnecting the replica from master instance (102 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (1 ms) [ok]: FUNCTION - function effect is replicated to replica (0 ms) [ok]: FUNCTION - modify key space of read only replica (1 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (242 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (1083 ms) [ok]: AOF rewrite of list with listpack encoding, int data (53 ms) [ok]: Script return recursive object (445 ms) [ok]: Script check unpack with massive arguments (28 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (82 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (218 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (661 ms) [ok]: CONFIG SET with multiple args (1 ms) [ok]: CONFIG SET rollback on set error (2 ms) [ok]: CONFIG SET rollback on apply error (4 ms) [ok]: CONFIG SET duplicate configs (1 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (221 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: CONFIG GET hidden configs (12 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (219 ms) [ok]: redis-server command line arguments - error cases (82 ms) [ok]: AOF rewrite of set with intset encoding, string data (104 ms) [ok]: Dumping an RDB - functions only: yes (668 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (186 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (220 ms) [45/91 done]: integration/corrupt-dump (15 seconds) Testing unit/introspection-2 [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (218 ms) [ok]: AOF rewrite of set with intset encoding, int data (104 ms) [ok]: Scan mode (135 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (404 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (218 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (186 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (213 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (325 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (104 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (899 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (230 ms) [ok]: Timedout script does not cause a false dead client (185 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (1 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (1 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (1 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (1 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (210 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (220 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (1 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (104 ms) [ok]: Timedout script link is still usable after Lua returns (301 ms) [ok]: PSYNC2 #3899 regression: kill first replica (48 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (229 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (55 ms) [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (1 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (1 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (1 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (206 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (1 ms) [ok]: FUNCTION - deny oom on no-writes function (1 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redis version api (1 ms) [ok]: FUNCTION - function stats (0 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (1 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (1 ms) [ok]: Timedout scripts and unblocked command (518 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (105 ms) [46/91 done]: unit/functions (4 seconds) Testing unit/limits [ok]: dismiss client output buffer (5122 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (989 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (204 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (4 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (231 ms) [ok]: Without maxmemory small integers are shared (1 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (0 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: dismiss client query buffer (203 ms) [ok]: AOF rewrite functions (103 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (14830 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: redis-server command line arguments - save with empty input (1091 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (214 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (260 ms) [ok]: BGREWRITEAOF is refused if already in progress (11 ms) [47/91 done]: unit/aofrw (38 seconds) Testing unit/obuf-limits [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (217 ms) [ok]: CONFIG SET client-output-buffer-limit (2 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: Connecting as a replica (2126 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (491 ms) [ok]: Check if maxclients works refusing connections (907 ms) [ok]: cannot modify protected configuration - local (7 ms) [48/91 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: BITCOUNT returns 0 against non existing key (0 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (1 ms) [ok]: BITCOUNT against test vector #1 (1 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (1 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: dismiss replication backlog (1333 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [49/91 done]: integration/dismiss-mem (8 seconds) Testing unit/bitfield [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (657 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (1 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (1 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (1 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2918 ms) [ok]: BITCOUNT fuzzing without start/end (861 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9357 ms) [ok]: BITFIELD overflow detection fuzzing (386 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (3 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (595 ms) [ok]: config during loading (1270 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (1 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (11 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Piping raw protocol (1753 ms) [ok]: Options -X with illegal argument (5 ms) [ok]: DUMP RESTORE with -x option (10 ms) [ok]: DUMP RESTORE with -X option (9 ms) [ok]: Script block the time in some expiration related commands (83 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: BITFIELD overflow wrap fuzzing (552 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (3 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [50/91 done]: integration/redis-cli (10 seconds) Testing unit/geo [ok]: CONFIG REWRITE handles rename-command properly (346 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (587 ms) [ok]: GEO with wrong type src key (3 ms) [ok]: GEO with non existing src key (1 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (1 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (1 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (1 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (1 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (1 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (1 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (1 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (1 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (1 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (2 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (1 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (1 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (1 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (1 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (0 ms) [ok]: GEOSEARCH with small distance (1 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (1 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [51/91 done]: integration/psync2-pingoff (16 seconds) Testing unit/memefficiency [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (2 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (285 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (15 ms) [ok]: SCRIPTING FLUSH ASYNC (16 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (1 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (1 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (1 ms) [52/91 done]: unit/bitfield (2 seconds) Testing unit/hyperloglog [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (540 ms) [ok]: BITCOUNT fuzzing with start/end (1340 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: BITCOUNT syntax error #1 (1 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (1 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (1 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: CONFIG REWRITE handles alias config properly (700 ms) [53/91 done]: unit/introspection (7 seconds) Testing unit/lazyfree [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: Detect write load to master (1001 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9979 ms) [54/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/wait [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (561 ms) [ok]: UNLINK can reclaim memory in background (460 ms) [ok]: Setup slave (102 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: BITOP and fuzzing (765 ms) [ok]: EVAL does not leak in the Lua stack (1084 ms) [ok]: Memory efficiency with values in range 32 (1217 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (76 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (392 ms) [ok]: HyperLogLog self test passes (1042 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (1 ms) [ok]: MGET: mget shouldn't be propagated in Lua (99 ms) [ok]: lazy free a stream with all types of metadata (167 ms) [ok]: lazy free a stream with deleted cgroup (2 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: BITOP or fuzzing (456 ms) [55/91 done]: unit/lazyfree (1 seconds) Testing unit/pause [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (766 ms) [ok]: TOUCH alters the last access time of a key (3003 ms) [ok]: Test read commands are not blocked by client pause (2 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (328 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (3 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (2 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1075 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (343 ms) [ok]: BITOP xor fuzzing (566 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (3 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (2 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (2 ms) [ok]: Test RO scripts are not blocked by pause RO (2 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (2 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (3 ms) [ok]: BITOP NOT fuzzing (62 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: BITOP with non string source key (1 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (1 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: Test multiple clients can be queued up and unblocked (3 ms) [ok]: BITPOS bit=0 with string less than 1 word works (1 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (6 ms) [ok]: BITPOS bit=0 works with intervals (2 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (1 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (4 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 64130) (1 ms) [ok]: Script return recursive object (389 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: Script check unpack with massive arguments (43 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (2 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: Test both active and passive expires are skipped during client pause (104 ms) [ok]: Test that client pause starts at the end of a transaction (2 ms) [ok]: Memory efficiency with values in range 64 (1079 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (803 ms) [ok]: ziplist implementation: value encoding and backlink (14585 ms) [ok]: HyperLogLogs are promote from sparse to dense (1131 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Test when replica paused, offset would not grow (4 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (311 ms) [ok]: Test replica offset would grow after unpause (1 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (115 ms) [56/91 done]: unit/pause (2 seconds) Testing unit/querybuf [ok]: Operations in no-touch mode do not alter the last access time of a key (1102 ms) [ok]: TOUCH returns the number of existing keys specified (0 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (2 ms) [ok]: command stats for EXPIRE (2 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (3 ms) [ok]: command stats for scripts (3 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (2 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (7 ms) [ok]: COMMAND LIST syntax error (1 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (9 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (2 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (1 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (1 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (1 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (2 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (2 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (1 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (1 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (2 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (2 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (404 ms) [57/91 done]: unit/introspection-2 (8 seconds) Testing unit/tls [ok]: BITPOS bit=0 fuzzy testing using SETBIT (424 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (197 ms) [58/91 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1104 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (1 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (2 ms) [ok]: Adding prefixes to BCAST mode works (1 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: Timedout script does not cause a false dead client (198 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (1 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (381 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (958 ms) [59/91 done]: unit/bitops (5 seconds) Testing unit/oom-score-adj [ok]: CONFIG SET oom-score-adj works as expected (12 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (1 ms) [ok]: CONFIG SET oom score restored on disable (1 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (1 ms) [ok]: Memory efficiency with values in range 128 (1110 ms) [ok]: Timedout script link is still usable after Lua returns (322 ms) [ok]: PSYNC2 #3899 regression: kill first replica (118 ms) [60/91 done]: unit/oom-score-adj (0 seconds) Testing unit/shutdown [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (116 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (13 ms) [ok]: Temp rdb will be deleted in signal handle (85 ms) [ok]: Timedout scripts and unblocked command (536 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (810 ms) [ok]: RDB save will be failed in shutdown (2 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (99 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (0 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (3 ms) [ok]: Clean up rdb same named folder (0 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (11 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (4 ms) [ok]: Tracking gets notification of lazy expired keys (102 ms) [ok]: HELLO 3 reply is correct (1 ms) [ok]: HELLO without protover (2 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (2 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (2 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (2 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms) [ok]: Able to redirect to a RESP3 client (2 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (2 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (112 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: Tracking invalidation message of eviction keys should be before response (5 ms) [ok]: Unblocked BLMOVE gets notification after response (2 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (102 ms) [ok]: Tracking gets notification on tracking table key eviction (54 ms) [ok]: Invalidation message received for flushall (3 ms) [ok]: Invalidation message received for flushdb (3 ms) [ok]: Test ASYNC flushall (3 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (3 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Memory efficiency with values in range 1024 (1062 ms) [61/91 done]: unit/shutdown (1 seconds) Testing unit/networking [ok]: Connect a replica to the master instance (103 ms) [ok]: Now use EVALSHA against the master, with both SHAs (1 ms) [ok]: HyperLogLog sparse encoding stress test (2052 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (1 ms) [ok]: EVALSHA replication when first call is readonly (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: WAITAOF local copy before fsync (95 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (202 ms) [ok]: Tracking info is correct (4 ms) [ok]: CLIENT GETREDIR provides correct client id (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (2 ms) [ok]: Regression test for #11715 (3 ms) [ok]: RESP3 based basic invalidation with client reply off (2 ms) [ok]: RESP2 based basic invalidation with client reply off (50 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (4 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (3 ms) [ok]: CONFIG SET port number (222 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (725 ms) [ok]: Replication: commands with many arguments (issue #1221) (25719 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [62/91 done]: unit/tracking (2 seconds) Testing unit/client-eviction [ok]: spopwithcount rewrite srem command (143 ms) [ok]: CONFIG SET bind address (378 ms) [ok]: PSYNC2 #3899 regression: verify consistency (39 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: client evicted due to large argv (122 ms) [ok]: client evicted due to large query buf (61 ms) [ok]: client evicted due to percentage of maxmemory (16 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (582 ms) [ok]: query buffer resized correctly (2770 ms) [ok]: client evicted due to large multi buf (311 ms) [ok]: CONFIG SET bind-source-addr (522 ms) [ok]: query buffer resized correctly when not idle (90 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: WAITAOF local copy everysec (1203 ms) [ok]: WAITAOF local copy with appendfsync always (1 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (1 ms) [ok]: client evicted due to watched key list (285 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (536 ms) [63/91 done]: integration/psync2-reg (22 seconds) Testing unit/violations [ok]: Default bind address configuration handling (214 ms) [ok]: Protected mode works as expected (5 ms) [ok]: SORT adds integer field to list (1 ms) [64/91 done]: unit/networking (2 seconds) Testing unit/replybufsize [ok]: WAITAOF local if AOFRW was postponed (300 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [65/91 done]: unit/violations (0 seconds) Testing unit/cluster/announced-endpoints [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (1344 ms) [ok]: WAITAOF replica copy before fsync (78 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (538 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (1 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (3 ms) [ok]: Data divergence is allowed on writable replicas (2 ms) [ok]: verify reply buffer limits (648 ms) [66/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (541 ms) [67/91 done]: integration/replication-4 (38 seconds) Testing unit/cluster/cli [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: WAITAOF replica copy everysec (716 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: Memory efficiency with values in range 16384 (2690 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [68/91 done]: unit/memefficiency (7 seconds) Testing unit/cluster/scripting [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (1 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (1 ms) [ok]: no-writes shebang flag (0 ms) [ok]: Client output buffer hard limit is enforced (9918 ms) [ok]: client evicted due to pubsub subscriptions (1612 ms) [ok]: client evicted due to tracking redirection (81 ms) [ok]: no-writes shebang flag on replica (107 ms) [ok]: not enough good replicas (1 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1004 ms) [ok]: not enough good replicas state change during long script (820 ms) [ok]: allow-stale shebang flag (2 ms) [ok]: reject script do not cause a Lua stack leak (8 ms) [ok]: query buffer resized correctly with fat argv (2906 ms) [69/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/hostnames [ok]: Consistent eval error reporting (16 ms) [ok]: LUA redis.error_reply API (2 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (1 ms) [ok]: LUA test pcall (1 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (0 ms) [70/91 done]: unit/scripting (17 seconds) Testing unit/cluster/human-announced-nodename [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (203 ms) [ok]: Test change cluster-announce-bus-port at runtime (202 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (1 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Function no-cluster flag (1 ms) [ok]: Script no-cluster flag (0 ms) [ok]: Key lazy expires during key migration (14 ms) [ok]: Coverage: Basic cluster commands (3 ms) [71/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/multi-slot-operations [72/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/slot-ownership [ok]: Create 3 node cluster (2022 ms) [ok]: Run blocking command on cluster node3 (0 ms) [ok]: Perform a Resharding (7 ms) [ok]: Verify command got unblocked after resharding (39 ms) [ok]: Wait for cluster to be stable (10 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (4 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9303 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2012 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (103 ms) [ok]: WAITAOF replica copy appendfsync always (1 ms) [73/91 done]: unit/cluster/misc (3 seconds) Testing unit/cluster/links [ok]: Kill a cluster node and wait for fail state (1269 ms) [ok]: Verify command got unblocked after cluster failure (53 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (13220 ms) [ok]: WAITAOF replica copy if replica is blocked (899 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 101837) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (1 ms) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (42 ms) [ok]: Set cluster human announced nodename and let it propagate (206 ms) [ok]: client evicted due to client tracking prefixes (3886 ms) [ok]: client evicted due to output buf (8 ms) [ok]: Set cluster hostnames and verify they are propagated (211 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4170 ms) [ok]: client no-evict on (110 ms) [ok]: client no-evict off (65 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Update hostnames and make sure they are all eventually propagated (211 ms) [ok]: Continuous slots distribution (15 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (8 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (211 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (210 ms) [ok]: avoid client eviction when client is freed by output buffer limit (209 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1002 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (213 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [74/91 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Broadcast message across a cluster shard while a cluster link is down (106 ms) [ok]: Detect write load to master (1002 ms) [ok]: WAITAOF on promoted replica (601 ms) [76/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: decrease maxmemory-clients causes client eviction (595 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (1 ms) [ok]: evict clients only until below limit (212 ms) [ok]: evict clients in right order (large to small) (259 ms) [ok]: client total memory grows during client no-evict (126 ms) [ok]: client total memory grows during maxmemory-clients disabled (125 ms) [77/91 done]: unit/client-eviction (9 seconds) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3060 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2004 ms) [ok]: ziplist implementation: encoding stress testing (12490 ms) [78/91 done]: unit/type/list-3 (59 seconds) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (402 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Each node has two links with each peer (12 ms) [ok]: Validate cluster links format (2 ms) [ok]: Human nodenames are visible in log messages (4023 ms) [79/91 done]: unit/cluster/human-announced-nodename (7 seconds) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3621 ms) [ok]: Test restart will keep hostname information (150 ms) [ok]: Test hostname validation (0 ms) [ok]: WAITAOF master isn't configured to do AOF (1001 ms) [ok]: WAITAOF replica isn't configured to do AOF (102 ms) [80/91 done]: unit/cluster/hostnames (7 seconds) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5060 ms) [ok]: No response for single command if client output buffer hard limit is enforced (122 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (901 ms) [ok]: Verify that single primary marks replica as failed (3141 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1047 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (21 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (36 ms) [ok]: Obuf limit, KEYS stopped mid-run (124 ms) [81/91 done]: unit/obuf-limits (21 seconds) [ok]: WAITAOF master sends PING after last write (1202 ms) [ok]: Migrate the last slot away from a node using redis-cli (3938 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6248 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAITAOF master client didn't send any write command (1203 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 144018) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: Detect write load to master (1002 ms) [ok]: WAITAOF master client didn't send any command (1201 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: redis-cli --cluster create with cluster-port (1928 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (1 ms) [ok]: redis-cli --cluster add-node with cluster-port (1132 ms) [82/91 done]: unit/cluster/cli (16 seconds) [ok]: PSYNC2: Set #3 to replicate from #1 (1 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3332 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Disconnect link when send buffer limit reached (9455 ms) [ok]: GEOSEARCH fuzzy test - byradius (25498 ms) [ok]: Link memory increases with publishes (654 ms) [ok]: Verify that multiple primaries mark replica as failed (6171 ms) [ok]: Link memory resets after publish messages flush (1000 ms) [83/91 done]: unit/cluster/failure-marking (14 seconds) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2331 ms) [84/91 done]: unit/cluster/links (17 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (15246 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1327 ms) [ok]: setup replication for following tests (102 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7882 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (678 ms) [85/91 done]: unit/wait (28 seconds) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 185275) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: Bring the master back again for next test (2 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (203 ms) [ok]: Detect write load to master (1001 ms) [86/91 done]: integration/psync2 (48 seconds) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9380 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (1002 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (14302 ms) [ok]: GEOSEARCH fuzzy test - bybox (23095 ms) [ok]: GEOSEARCH box edges fuzzy test (50 ms) [87/91 done]: unit/geo (48 seconds) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9347 ms) [ok]: Slave should be able to synchronize with the master (1813 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (78 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (50704 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (1 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6287 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (5662 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (2575 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (765 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [88/91 done]: unit/hyperloglog (64 seconds) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7830 ms) [ok]: Slave should be able to synchronize with the master (809 ms) [ok]: Detect write load to master (0 ms) [ok]: slave buffer are counted correctly (67942 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9351 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: replica buffer don't induce eviction (8549 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (322 ms) [ok]: client tracking don't cause eviction feedback loop (1387 ms) [ok]: propagation with eviction (99 ms) [ok]: propagation with eviction in MULTI (99 ms) [ok]: lru/lfu value of the key just added (1 ms) [89/91 done]: unit/maxmemory (94 seconds) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9452 ms) [ok]: Slave should be able to synchronize with the master (1811 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (87 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (51284 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (420 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (1 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (422 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (861 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6295 ms) [ok]: Busy script during async loading (870 ms) [ok]: Blocked commands and configs during async-loading (429 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (1 ms) Waiting for process 40449 to exit... Waiting for process 40449 to exit... Waiting for process 40449 to exit... Waiting for process 40449 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7848 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9399 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9497 ms) [90/91 done]: integration/replication-psync (160 seconds) [ok]: diskless loading short read (39567 ms) [ok]: diskless no replicas drop during rdb pipe (7186 ms) [ok]: diskless slow replicas drop during rdb pipe (2950 ms) [ok]: diskless fast replicas drop during rdb pipe (6303 ms) [ok]: diskless all replicas drop during rdb pipe (954 ms) [ok]: diskless timeout replicas drop during rdb pipe (6162 ms) [ok]: diskless replication child being killed is collected (1433 ms) [ok]: replication child dies when parent is killed - diskless: yes (1170 ms) [ok]: replication child dies when parent is killed - diskless: no (1471 ms) [ok]: diskless replication read pipe cleanup (731 ms) [ok]: replicaof right after disconnection (1836 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (936 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync (107 ms) [ok]: replica can handle EINTR if use diskless load (659 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (101 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (101 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (109 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (106 ms) [ok]: PSYNC with wrong offset should throw error (2 ms) [ok]: Test replication with lazy expire (13 ms) [91/91 done]: integration/replication (214 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (1 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (1 seconds) Testing solo test [91/91 done]: defrag (1 seconds) The End Execution time of different units: 0 seconds - unit/type/incr 0 seconds - unit/printver 0 seconds - unit/info-command 1 seconds - unit/protocol 2 seconds - unit/keyspace 2 seconds - unit/auth 2 seconds - unit/info 1 seconds - unit/quit 5 seconds - unit/type/stream-cgroups 2 seconds - unit/acl 1 seconds - unit/acl-v2 8 seconds - unit/type/hash 7 seconds - unit/multi 10 seconds - unit/sort 11 seconds - unit/scan 11 seconds - unit/other 13 seconds - unit/expire 14 seconds - unit/type/string 15 seconds - unit/type/list 13 seconds - unit/latency-monitor 8 seconds - integration/shutdown 1 seconds - integration/aof-race 14 seconds - integration/replication-2 24 seconds - unit/type/list-2 14 seconds - integration/replication-3 26 seconds - unit/type/set 1 seconds - integration/convert-zipmap-hash-on-load 27 seconds - unit/type/stream 0 seconds - integration/convert-ziplist-hash-on-load 0 seconds - integration/convert-ziplist-zset-on-load 1 seconds - integration/logging 14 seconds - integration/replication-buffer 28 seconds - unit/dump 5 seconds - integration/rdb 5 seconds - integration/failover 26 seconds - integration/block-repl 34 seconds - unit/type/zset 11 seconds - integration/aof-multi-part 1 seconds - integration/redis-benchmark 1 seconds - unit/pubsub 15 seconds - integration/aof 2 seconds - unit/pubsubshard 9 seconds - integration/psync2-master-restart 1 seconds - unit/slowlog 15 seconds - integration/corrupt-dump 4 seconds - unit/functions 38 seconds - unit/aofrw 1 seconds - unit/limits 8 seconds - integration/dismiss-mem 10 seconds - integration/redis-cli 16 seconds - integration/psync2-pingoff 2 seconds - unit/bitfield 7 seconds - unit/introspection 20 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/lazyfree 2 seconds - unit/pause 8 seconds - unit/introspection-2 0 seconds - unit/tls 5 seconds - unit/bitops 0 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 2 seconds - unit/tracking 22 seconds - integration/psync2-reg 2 seconds - unit/networking 0 seconds - unit/violations 1 seconds - unit/replybufsize 38 seconds - integration/replication-4 7 seconds - unit/memefficiency 6 seconds - unit/querybuf 17 seconds - unit/scripting 3 seconds - unit/cluster/announced-endpoints 2 seconds - unit/cluster/scripting 3 seconds - unit/cluster/misc 3 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 9 seconds - unit/client-eviction 59 seconds - unit/type/list-3 7 seconds - unit/cluster/human-announced-nodename 7 seconds - unit/cluster/hostnames 21 seconds - unit/obuf-limits 16 seconds - unit/cluster/cli 14 seconds - unit/cluster/failure-marking 17 seconds - unit/cluster/links 28 seconds - unit/wait 48 seconds - integration/psync2 48 seconds - unit/geo 64 seconds - unit/hyperloglog 94 seconds - unit/maxmemory 160 seconds - integration/replication-psync 214 seconds - integration/replication 1 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 1 seconds - violations 1 seconds - defrag \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' >>> redis-openrc*: Running split function openrc... >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.5-r1.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 28.0 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.5-r1.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-ppc64le.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redis*: Package size: 4.2 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.5-r1.apk >>> redis: Build complete at Tue, 01 Oct 2024 19:07:12 +0000 elapsed time 0h 4m 5s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20241001.190307) (2/8) Purging linux-headers (6.6-r0) (3/8) Purging openssl-dev (3.3.2-r0) (4/8) Purging tcl (8.6.14-r1) (5/8) Purging tzdata (2024b-r0) (6/8) Purging procps-ng (4.0.4-r0) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r0) Executing busybox-1.36.1-r29.trigger OK: 415 MiB in 103 packages >>> redis: Updating the community/ppc64le repository index... >>> redis: Signing the index...