>>> bats-assert: Building community/bats-assert 2.1.0-r0 (using abuild 3.14.0-r0) started Fri, 18 Oct 2024 08:57:12 +0000
>>> bats-assert: Validating /home/buildozer/aports/community/bats-assert/APKBUILD...
>>> WARNING: bats-assert: Setting the maintainer with a comment is deprecated. Use maintainer="qaqland <qaq@qaq.land>" instead
>>> bats-assert: Analyzing dependencies...
>>> bats-assert: Installing for build: build-base bash bats-core bats-support
(1/4) Installing bash (5.2.37-r0)
Executing bash-5.2.37-r0.post-install
(2/4) Installing bats-core (1.11.0-r0)
(3/4) Installing bats-support (0.3.0-r0)
(4/4) Installing .makedepends-bats-assert (20241018.085714)
Executing busybox-1.36.1-r32.trigger
OK: 245 MiB in 104 packages
>>> bats-assert: Cleaning up srcdir
>>> bats-assert: Cleaning up pkgdir
>>> bats-assert: Cleaning up tmpdir
>>> bats-assert: Fetching https://distfiles.alpinelinux.org/distfiles/edge/bats-assert-2.1.0.tar.gz
>>> bats-assert: Fetching https://distfiles.alpinelinux.org/distfiles/edge/bats-assert-2.1.0.tar.gz
>>> bats-assert: Checking sha512sums...
bats-assert-2.1.0.tar.gz: OK
>>> bats-assert: Unpacking /var/cache/distfiles/bats-assert-2.1.0.tar.gz...
1..141
ok 1 assert() <expression>: returns 0 if <expression> evaluates to TRUE
ok 2 assert() <expression>: returns 1 and displays <expression> if it evaluates to FALSE
ok 3 assert_equal() <actual> <expected>: returns 0 if <actual> equals <expected>
ok 4 assert_equal() <actual> <expected>: returns 1 and displays details if <actual> does not equal <expected>
ok 5 assert_equal() <actual> <expected>: displays details in multi-line format if <actual> is longer than one line
ok 6 assert_equal() <actual> <expected>: displays details in multi-line format if <expected> is longer than one line
ok 7 assert_equal() <actual> <expected>: performs literal matching
ok 8 assert_failure(): returns 0 if `$status' is not 0
ok 9 assert_failure(): returns 1 and displays details if `$status' is 0
ok 10 assert_failure(): displays `$output' in multi-line format if it is longer then one line
ok 11 assert_failure() <status>: returns 0 if `$status' equals <status>
ok 12 assert_failure() <status>: returns 1 and displays details if `$status' does not equal <status>
ok 13 assert_failure() <status>: displays `$output' in multi-line format if it is longer then one line
ok 14 assert_line() <expected>: returns 0 if <expected> is a line in `${lines[@]}'
ok 15 assert_line() <expected>: returns 1 and displays details if <expected> is not a line in `${lines[@]}'
ok 16 assert_line() <expected>: displays `$output' in multi-line format if it is longer than one line
ok 17 assert_line() <expected>: performs literal matching by default
ok 18 assert_line() -p <partial>: enables partial matching
ok 19 assert_line() --partial <partial>: enables partial matching
ok 20 assert_line() --partial <partial>: returns 0 if <partial> is a substring in any line in `${lines[@]}'
ok 21 assert_line() --partial <partial>: returns 1 and displays details if <partial> is not a substring in any lines in `${lines[@]}'
ok 22 assert_line() --partial <partial>: displays `$output' in multi-line format if it is longer than one line
ok 23 assert_line() -e <regexp>: enables regular expression matching
ok 24 assert_line() --regexp <regexp>: enables regular expression matching
ok 25 assert_line() --regexp <regexp>: returns 0 if <regexp> matches any line in `${lines[@]}'
ok 26 assert_line() --regexp <regexp>: returns 1 and displays details if <regexp> does not match any lines in `${lines[@]}'
ok 27 assert_line() --regexp <regexp>: displays `$output' in multi-line format if longer than one line
ok 28 assert_line() -n <idx> <expected>: matches against the <idx>-th line only
ok 29 assert_line() --index <idx> <expected>: matches against the <idx>-th line only
ok 30 assert_line() --index <idx>: returns 1 and displays an error message if <idx> is not an integer
ok 31 assert_line() --index <idx> <expected>: returns 0 if <expected> equals `${lines[<idx>]}'
ok 32 assert_line() --index <idx> <expected>: returns 1 and displays details if <expected> does not equal `${lines[<idx>]}'
ok 33 assert_line() --index <idx> <expected>: performs literal matching by default
ok 34 assert_line() --index <idx> -p <partial>: enables partial matching
ok 35 assert_line() --index <idx> --partial <partial>: enables partial matching
ok 36 assert_line() --index <idx> --partial <partial>: returns 0 if <partial> is a substring in `${lines[<idx>]}'
ok 37 assert_line() --index <idx> --partial <partial>: returns 1 and displays details if <partial> is not a substring in `${lines[<idx>]}'
ok 38 assert_line() --index <idx> -e <regexp>: enables regular expression matching
ok 39 assert_line() --index <idx> --regexp <regexp>: enables regular expression matching
ok 40 assert_line() --index <idx> --regexp <regexp>: returns 0 if <regexp> matches `${lines[<idx>]}'
ok 41 assert_line() --index <idx> --regexp <regexp>: returns 1 and displays details if <regexp> does not match `${lines[<idx>]}'
ok 42 assert_line(): `--partial' and `--regexp' are mutually exclusive
ok 43 assert_line() --regexp <regexp>: returns 1 and displays an error message if <regexp> is not a valid extended regular expression
ok 44 assert_line(): `--' stops parsing options
ok 45 assert_not_equal() <actual> <unexpected>: returns 0 if <actual> does not equal <unexpected>
ok 46 assert_not_equal() <actual> <unexpected>: returns 1 and displays details if <actual> equals <unexpected>
ok 47 assert_not_equal() <actual> <unexpected>: displays details in multi-line format if <actual> and <unexpected> are longer than one line
ok 48 assert_not_equal() <actual> <unexpected>: performs literal matching
ok 49 assert_output() <expected>: returns 0 if <expected> equals `$output'
ok 50 assert_output() <expected>: returns 1 and displays details if <expected> does not equal `$output'
ok 51 assert_output(): succeeds if output is non-empty
ok 52 assert_output(): fails if output is empty
ok 53 assert_output() - : reads <expected> from STDIN
ok 54 assert_output() --stdin : reads <expected> from STDIN
ok 55 assert_output() <expected>: displays details in multi-line format if `$output' is longer than one line
ok 56 assert_output() <expected>: displays details in multi-line format if <expected> is longer than one line
ok 57 assert_output() <expected>: performs literal matching by default
ok 58 assert_output() -p <partial>: enables partial matching
ok 59 assert_output() --partial <partial>: enables partial matching
ok 60 assert_output() --partial <partial>: returns 0 if <partial> is a substring in `$output'
ok 61 assert_output() --partial <partial>: returns 1 and displays details if <partial> is not a substring in `$output'
ok 62 assert_output() --partial <partial>: displays details in multi-line format if `$output' is longer than one line
ok 63 assert_output() --partial <partial>: displays details in multi-line format if <partial> is longer than one line
ok 64 assert_output() -e <regexp>: enables regular expression matching
ok 65 assert_output() --regexp <regexp>: enables regular expression matching
ok 66 assert_output() --regexp <regexp>: returns 0 if <regexp> matches `$output'
ok 67 assert_output() --regexp <regexp>: returns 1 and displays details if <regexp> does not match `$output'
ok 68 assert_output() --regexp <regexp>: displays details in multi-line format if `$output' is longer than one line
ok 69 assert_output() --regexp <regexp>: displays details in multi-line format if <regexp> is longer than one line
ok 70 assert_output() --regexp <regexp>: returns 1 and displays an error message if <regexp> is not a valid extended regular expression
ok 71 assert_output(): `--partial' and `--regexp' are mutually exclusive
ok 72 assert_output(): `--' stops parsing options
ok 73 assert_regex() <value> <pattern>: succeeds if a <value> substring matches extended regular expression <pattern>
ok 74 assert_regex() <value> <pattern>: fails if no <value> substring matches extended regular expression <pattern>
ok 75 assert_regex() <value> <pattern>: provides results in BASH_REMATCH
ok 76 assert_regex() <value> <pattern>: matches case-insensitively when 'nocasematch' is set
ok 77 assert_regex() <value> <pattern>: outputs multi-line <value> nicely when it fails
ok 78 assert_regex() <value> <pattern>: returns 1 and displays an error message if <pattern> is not a valid extended regular expression
ok 79 assert_success(): returns 0 if `$status' is 0
ok 80 assert_success(): returns 1 and displays details if `$status' is not 0
ok 81 assert_success(): displays `$output' in multi-line format if it is longer than one line
ok 82 refute() <expression>: returns 0 if <expression> evaluates to FALSE
ok 83 refute() <expression>: returns 1 and displays <expression> if it evaluates to TRUE
ok 84 refute_line() <unexpected>: returns 0 if <unexpected> is not a line in `${lines[@]}'
ok 85 refute_line() <unexpected>: returns 1 and displays details if <unexpected> is not a line in `${lines[@]}'
ok 86 refute_line() <unexpected>: displays `$output' in multi-line format if it is longer than one line
ok 87 refute_line() <unexpected>: performs literal matching by default
ok 88 refute_line() -p <partial>: enables partial matching
ok 89 refute_line() --partial <partial>: enables partial matching
ok 90 refute_line() --partial <partial>: returns 0 if <partial> is not a substring in any line in `${lines[@]}'
ok 91 refute_line() --partial <partial>: returns 1 and displays details if <partial> is a substring in any line in `${lines[@]}'
ok 92 refute_line() --partial <partial>: displays `$output' in multi-line format if it is longer than one line
ok 93 refute_line() -e <regexp>: enables regular expression matching
ok 94 refute_line() --regexp <regexp>: enables regular expression matching
ok 95 refute_line() --regexp <regexp>: returns 0 if <regexp> does not match any line in `${lines[@]}'
ok 96 refute_line() --regexp <regexp>: returns 1 and displays details if <regexp> matches any lines in `${lines[@]}'
ok 97 refute_line() --regexp <regexp>: displays `$output' in multi-line format if longer than one line
ok 98 refute_line() -n <idx> <expected>: matches against the <idx>-th line only
ok 99 refute_line() --index <idx> <expected>: matches against the <idx>-th line only
ok 100 refute_line() --index <idx>: returns 1 and displays an error message if <idx> is not an integer
ok 101 refute_line() --index <idx> <unexpected>: returns 0 if <unexpected> does not equal `${lines[<idx>]}'
ok 102 refute_line() --index <idx> <unexpected>: returns 1 and displays details if <unexpected> equals `${lines[<idx>]}'
ok 103 refute_line() --index <idx> <unexpected>: performs literal matching by default
ok 104 refute_line() --index <idx> -p <partial>: enables partial matching
ok 105 refute_line() --index <idx> --partial <partial>: enables partial matching
ok 106 refute_line() --index <idx> --partial <partial>: returns 0 if <partial> is not a substring in `${lines[<idx>]}'
ok 107 refute_line() --index <idx> --partial <partial>: returns 1 and displays details if <partial> is a substring in `${lines[<idx>]}'
ok 108 refute_line() --index <idx> -e <regexp>: enables regular expression matching
ok 109 refute_line() --index <idx> --regexp <regexp>: enables regular expression matching
ok 110 refute_line() --index <idx> --regexp <regexp>: returns 0 if <regexp> does not match `${lines[<idx>]}'
ok 111 refute_line() --index <idx> --regexp <regexp>: returns 1 and displays details if <regexp> matches `${lines[<idx>]}'
ok 112 refute_line(): `--partial' and `--regexp' are mutually exclusive
ok 113 refute_line() --regexp <regexp>: returns 1 and displays an error message if <regexp> is not a valid extended regular expression
ok 114 refute_line(): `--' stops parsing options
ok 115 refute_output() <unexpected>: returns 0 if <unexpected> does not equal `$output'
ok 116 refute_output() <unexpected>: returns 1 and displays details if <unexpected> equals `$output'
ok 117 refute_output(): succeeds if output is empty
ok 118 refute_output(): fails if output is non-empty
ok 119 refute_output() - : reads <unexpected> from STDIN
ok 120 refute_output() --stdin : reads <unexpected> from STDIN
ok 121 refute_output() <unexpected>: displays details in multi-line format if necessary
ok 122 refute_output() <unexpected>: performs literal matching by default
ok 123 refute_output() -p <partial>: enables partial matching
ok 124 refute_output() --partial <partial>: enables partial matching
ok 125 refute_output() --partial <partial>: returns 0 if <partial> is not a substring in `$output'
ok 126 refute_output() --partial <partial>: returns 1 and displays details if <partial> is a substring in `$output'
ok 127 refute_output() --partial <partial>: displays details in multi-line format if necessary
ok 128 refute_output() -e <regexp>: enables regular expression matching
ok 129 refute_output() --regexp <regexp>: enables regular expression matching
ok 130 refute_output() --regexp <regexp>: returns 0 if <regexp> does not match `$output'
ok 131 refute_output() --regexp <regexp>: returns 1 and displays details if <regexp> matches `$output'
ok 132 refute_output() --regexp <regexp>: displays details in multi-line format if necessary
ok 133 refute_output() --regexp <regexp>: returns 1 and displays an error message if <regexp> is not a valid extended regular expression
ok 134 refute_output(): `--partial' and `--regexp' are mutually exclusive
ok 135 refute_output(): `--' stops parsing options
ok 136 refute_regex() <value> <pattern>: fails if a <value> substring matches extended regular expression <pattern>
ok 137 refute_regex() <value> <pattern>: succeeds if no <value> substring matches extended regular expression <pattern>
ok 138 refute_regex() <value> <pattern>: provides results in BASH_REMATCH on failure
ok 139 refute_regex() <value> <pattern>: matches case-insensitively when 'nocasematch' is set
ok 140 refute_regex() <value> <pattern>: outputs multi-line <value> nicely when it fails
ok 141 refute_regex() <value> <pattern>: returns 1 and displays an error message if <pattern> is not a valid extended regular expression
>>> bats-assert: Entering fakeroot...
>>> bats-assert*: Running postcheck for bats-assert
>>> bats-assert*: Preparing package bats-assert...
>>> bats-assert*: Tracing dependencies...
	bash
	bats-core
	bats-support
>>> bats-assert*: Package size: 37.9 KB
>>> bats-assert*: Compressing data...
>>> bats-assert*: Create checksum...
>>> bats-assert*: Create bats-assert-2.1.0-r0.apk
>>> bats-assert: Build complete at Fri, 18 Oct 2024 08:57:34 +0000 elapsed time 0h 0m 22s
>>> bats-assert: Cleaning up srcdir
>>> bats-assert: Cleaning up pkgdir
>>> bats-assert: Uninstalling dependencies...
(1/4) Purging .makedepends-bats-assert (20241018.085714)
(2/4) Purging bats-support (0.3.0-r0)
(3/4) Purging bats-core (1.11.0-r0)
(4/4) Purging bash (5.2.37-r0)
Executing bash-5.2.37-r0.pre-deinstall
Executing busybox-1.36.1-r32.trigger
OK: 243 MiB in 100 packages
>>> bats-assert: Updating the community/loongarch64 repository index...
>>> bats-assert: Signing the index...