>>> redis: Building community/redis 7.2.5-r2 (using abuild 3.14.0-r0) started Thu, 17 Oct 2024 23:37:08 +0000 >>> redis: Validating /home/buildozer/aports/community/redis/APKBUILD... >>> WARNING: redis: Setting the maintainer with a comment is deprecated. Use maintainer="fossdd " instead >>> redis: Analyzing dependencies... >>> redis: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r1) (2/8) Installing openssl-dev (3.3.2-r2) (3/8) Installing tzdata (2024b-r1) (4/8) Installing tcl (8.6.15-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redis (20241017.233711) Executing busybox-1.36.1-r32.trigger OK: 256 MiB in 108 packages >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Cleaning up tmpdir >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.5.tar.gz >>> redis: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redis-7.2.5.tar.gz >>> redis: Checking sha512sums... redis-7.2.5.tar.gz: OK redis.conf.patch: OK sentinel.conf.patch: OK redis.initd: OK redis.confd: OK redis-sentinel.initd: OK redis.logrotate: OK CVE-2024-31227.patch: OK CVE-2024-31228.patch: OK CVE-2024-31449.patch: OK >>> redis: Unpacking /var/cache/distfiles/redis-7.2.5.tar.gz... >>> redis: redis.conf.patch patching file redis.conf Hunk #1 succeeded at 152 (offset 40 lines). Hunk #2 succeeded at 303 (offset 62 lines). Hunk #3 succeeded at 321 (offset 62 lines). Hunk #4 succeeded at 333 (offset 63 lines). Hunk #5 succeeded at 488 (offset 66 lines). >>> redis: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). >>> redis: CVE-2024-31227.patch patching file src/acl.c Hunk #1 succeeded at 1051 (offset -22 lines). patching file tests/unit/acl-v2.tcl Hunk #1 succeeded at 116 (offset -6 lines). >>> redis: CVE-2024-31228.patch patching file src/util.c Hunk #1 succeeded at 54 (offset 21 lines). Hunk #2 succeeded at 70 (offset 21 lines). Hunk #3 succeeded at 192 (offset 21 lines). patching file tests/unit/keyspace.tcl >>> redis: CVE-2024-31449.patch patching file deps/lua/src/lua_bit.c patching file tests/unit/scripting.tcl Hunk #1 succeeded at 613 (offset -86 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' CC Makefile.dep rm -rf redis-server redis-sentinel redis-cli redis-benchmark redis-check-rdb redis-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redis-check-rdb.d redis-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redis-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redis-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDIS_CFLAGS=-flto=auto >> .make-settings echo REDIS_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis cd hiredis && make static USE_SSL=1 MAKE linenoise cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hiredis' make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c make[3]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/fpconv' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/linenoise' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/hiredis' gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redis-check-rdb.o CC redis-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redis-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC redis-benchmark.o LINK redis-benchmark LINK redis-server LINK redis-cli INSTALL redis-sentinel INSTALL redis-check-rdb INSTALL redis-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 19054 Testing unit/printver [ready]: 19055 Testing unit/dump [ready]: 19057 Testing unit/auth [ready]: 19056 Testing unit/protocol [ready]: 19058 Testing unit/keyspace [ready]: 19059 Testing unit/scan [ready]: 19060 Testing unit/info [ready]: 19061 Testing unit/info-command [ready]: 19062 Testing unit/type/string [ready]: 19063 Testing unit/type/incr [ready]: 19064 Testing unit/type/list [ready]: 19065 Testing unit/type/list-2 [ready]: 19066 Testing unit/type/list-3 [ready]: 19067 Testing unit/type/set [ready]: 19068 Testing unit/type/zset [ready]: 19069 Testing unit/type/hash [ok]: AUTH fails if there is no password configured server side (1 ms) Testing Redis version 7.2.5 (00000000) [ok]: Arity check for auth command (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (2 ms) [ok]: SET and GET an item (0 ms) [ok]: SET and GET an empty item (1 ms) [ok]: DEL against a single item (2 ms) [ok]: INCR against non existing key (1 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: Vararg DEL (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (2 ms) [ok]: DECR against key created by incr (0 ms) [ok]: info command with at most one sub command (4 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: info command with one sub-section (1 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (1 ms) [ok]: Explicit regression for a list bug (2 ms) [ok]: Untagged multi-key commands (2 ms) [ok]: INCR against key originally set with SET (1 ms) [ok]: INCR over 32bit value (0 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: INCRBY over 32bit value with over 32bit increment (1 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: reg node check compression with insert and pop (2 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: INCR fails against key with spaces (right) (1 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: KEYS with pattern (2 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: reg node check compression combined with trim (1 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: KEYS to get all keys (0 ms) [ok]: DBSIZE (1 ms) [ok]: INCR fails against a key holding a list (1 ms) [ok]: reg node check compression with lset (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (1 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (4 ms) [ok]: RESTORE can set LRU (2 ms) [ok]: INCR can modify objects in-place (0 ms) [ok]: Check encoding - listpack (1 ms) [ok]: DEL all keys (2 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: plain node check compression (2 ms) [ok]: INCRBYFLOAT against key originally set with SET (1 ms) [ok]: RESTORE can set LFU (2 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: plain node check compression using lset (1 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (2 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: INCRBYFLOAT decrement (1 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: No negative zero (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (1 ms) [ok]: HRANDFIELD - listpack (9 ms) [ok]: ZADD XX and NX are not compatible - listpack (1 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (1 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: ZADD INCR LT/GT with inf - listpack (3 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (1 ms) [ok]: HRANDFIELD - hashtable (8 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (19 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: HRANDFIELD count overflow (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (2 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: ZCARD basics - listpack (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: SADD against non set (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: SADD a non-integer against a small intset (1 ms) [ok]: ZRANGE basics - listpack (3 ms) [ok]: ZREVRANGE basics - listpack (3 ms) [ok]: ZRANK/ZREVRANK basics - listpack (2 ms) [ok]: ZRANK - after deletion - listpack (1 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: Handle an empty query (44 ms) [ok]: SADD a non-integer against a large intset (15 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (7 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (7 ms) [ok]: ZLEXCOUNT advanced - listpack (4 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (3 ms) [ok]: SADD an integer larger than 64 bits to a large intset (20 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: Very big payload in GET/SET (57 ms) [ok]: SCAN basic (84 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (13 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (79 ms) [ok]: Negative multibulk length (48 ms) [ok]: DUMP of non existing key returns nil (1 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (1 ms) [1/91 done]: unit/printver (0 seconds) Testing unit/type/stream [ok]: Negative multibulk payload length (1 ms) [ok]: ZREMRANGEBYRANK basics - listpack (10 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (1 ms) [ok]: Unbalanced number of quotes (2 ms) [2/91 done]: unit/info-command (0 seconds) Testing unit/type/stream-cgroups [3/91 done]: unit/type/incr (0 seconds) Testing unit/sort [ok]: SADD overflows the maximum allowed integers in an intset - single (49 ms) [ok]: ZREMRANGEBYLEX basics - listpack (24 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: latencystats: disable/enable (3 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (2 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: latencystats: configure percentiles (3 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: latencystats: bad configure percentiles (3 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (13 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: Protocol desync regression test #1 (35 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: latencystats: blocking commands (4 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: latencystats: subcommands (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (1 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: Regression for quicklist #3343 bug (140 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: Protocol desync regression test #2 (39 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (49 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: SCAN COUNT (100 ms) [ok]: latencystats: measure latency (51 ms) [ok]: errorstats: failed call authentication error (2 ms) [ok]: errorstats: failed call within MULTI/EXEC (4 ms) [ok]: errorstats: failed call within LUA (3 ms) [ok]: errorstats: failed call NOSCRIPT error (3 ms) [ok]: HRANDFIELD with - hashtable (174 ms) [ok]: errorstats: failed call NOGROUP error (2 ms) [ok]: errorstats: rejected call unknown command (2 ms) [ok]: Protocol desync regression test #3 (39 ms) [ok]: errorstats: rejected call within MULTI/EXEC (6 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: errorstats: rejected call due to wrong arity (4 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (1 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (1 ms) [ok]: errorstats: rejected call by OOM error (3 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: XADD wrong number of args (1 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: errorstats: rejected call by authorization error (3 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: XADD IDs correctly report an error when overflowing (1 ms) [ok]: XADD auto-generated sequence is incremented for last ID (1 ms) [ok]: errorstats: blocking commands (3 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (2 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (47 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (1 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (2 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (1 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: Check compression with recompress (91 ms) [ok]: XPENDING only group (1 ms) [ok]: Listpack: SORT BY key (1 ms) [ok]: Listpack: SORT BY key with limit (1 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: XPENDING with IDLE (21 ms) [ok]: XPENDING with exclusive range intervals works as expected (0 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: Test LPUSH and LPOP on plain nodes (32 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (2 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: SCAN MATCH (88 ms) [ok]: test large number of args (56 ms) [ok]: test argument rewriting - issue 9598 (1 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (23 ms) [ok]: Blocking XREADGROUP: key deleted (2 ms) [ok]: Blocking XREADGROUP: key type changed with SET (2 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (2 ms) [ok]: Blocking XREADGROUP: flushed DB (2 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (2 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (2 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (2 ms) [ok]: Blocking XREAD: key type changed with SET (2 ms) [ok]: MIGRATE is caching connections (222 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (14 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (5 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (5 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (3 ms) [ok]: stats: eventloop metrics (114 ms) [ok]: XADD with MAXLEN option (130 ms) [ok]: HRANDFIELD with - listpack (165 ms) [ok]: SCAN TYPE (133 ms) [ok]: Test LSET with packed / plain combinations (138 ms) [ok]: Test LSET with packed is split in the middle (2 ms) [ok]: Set encoding after DEBUG RELOAD (187 ms) [ok]: SREM basics - $type (0 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: SREM basics - $type (14 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Crash due to wrongly recompress after lrem (231 ms) [ok]: XADD with MAXLEN option and the '=' argument (114 ms) [ok]: HSET/HLEN - Big hash creation (128 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: SCAN unknown type (92 ms) [ok]: HGET against the small hash (1 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (49 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: Quicklist: SORT BY key (15 ms) [ok]: Quicklist: SORT BY key with limit (2 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (36 ms) [ok]: SUNION with two sets - regular (9 ms) [ok]: Quicklist: SORT BY hash field (16 ms) [ok]: SUNIONSTORE with two sets - regular (10 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (48 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: SUNION with non existing keys - regular (9 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (7 ms) [ok]: SCAN with expired keys (95 ms) [ok]: Test LSET with packed consist only one item (186 ms) [ok]: Crash due to delete entry from a compress quicklist node (2 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: XADD with MAXLEN option and the '~' argument (126 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: HGET against the big hash (114 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (1 ms) [ok]: HMSET - small hash (0 ms) [ok]: Generated sets must be encoded correctly - intset (1 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (36 ms) [ok]: SUNION with two sets - intset (9 ms) [ok]: HMSET - big hash (61 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (2 ms) [ok]: HMGET - small hash (0 ms) [ok]: SUNIONSTORE with two sets - intset (10 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: SUNION with non existing keys - intset (9 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: SCAN with expired keys with TYPE filter (109 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (7 ms) [ok]: SSCAN with encoding intset (2 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: SSCAN with encoding listpack (2 ms) [ok]: SSCAN with encoding hashtable (6 ms) [ok]: HSCAN with encoding listpack (2 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (22 ms) [ok]: SUNION hashtable and listpack (2 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (1 ms) [ok]: HMGET - big hash (57 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HKEYS - big hash (14 ms) [ok]: HVALS - small hash (0 ms) [ok]: XADD with MINID option (164 ms) [ok]: HVALS - big hash (2 ms) [ok]: HGETALL - small hash (0 ms) [ok]: XTRIM with MINID option (2 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: HSCAN with encoding hashtable (83 ms) [ok]: ZSCAN with encoding listpack (2 ms) [ok]: LPOS basic usage - quicklist (43 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: HGETALL - big hash (39 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY against non existing hash key (1 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (1 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (1 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (1 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (1 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: ZSCAN with encoding skiplist (83 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (89 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: HSTRLEN against the big hash (84 ms) [ok]: HSTRLEN against non existing field (1 ms) [ok]: HSTRLEN corner cases (2 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (2 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: SCAN guarantees check under write load (29 ms) [ok]: SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: HSCAN with PATTERN (1 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (43 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: Hash fuzzing #1 - 10 fields (34 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (1 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (3 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (1 ms) [ok]: Hash fuzzing #2 - 10 fields (24 ms) [ok]: BLPOP: single existing list - quicklist (46 ms) [ok]: ZSCAN scores: regression test for issue #2175 (120 ms) [ok]: BLPOP: multiple existing lists - quicklist (92 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (1 ms) [ok]: Zero length value in key. SET/GET/EXISTS (0 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (1 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (1 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (1 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (1 ms) [ok]: COPY basic usage for string (1 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (1 ms) [ok]: COPY for string ensures that copied data is independent of copying data (2 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (1 ms) [ok]: COPY does not create an expire if it does not exist (0 ms) [ok]: BLPOP: second list has an entry - quicklist (44 ms) [ok]: COPY basic usage for list - quicklist (46 ms) [ok]: COPY basic usage for list - listpack (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (48 ms) [ok]: COPY basic usage for $type set (24 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (16 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: COPY basic usage for hashtable hash (18 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (92 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (44 ms) [ok]: BRPOPLPUSH - quicklist (44 ms) [ok]: BLMOVE left left - quicklist (44 ms) [ok]: COPY basic usage for stream (175 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1088 ms) [ok]: COPY basic usage for stream-cgroups (9 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (6 ms) [ok]: MOVE basic usage (2 ms) [ok]: MOVE against key existing in the target DB (1 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: RENAME can unblock XREADGROUP with data (2 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: MOVE can move key expire metadata as well (2 ms) [ok]: MOVE does not create an expire if it does not exist (2 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (13 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (1 ms) [ok]: BLMOVE left right - quicklist (48 ms) [ok]: Regression for pattern matching very long nested loops (49 ms) [ok]: BLMOVE right left - quicklist (44 ms) [ok]: BLMOVE right right - quicklist (44 ms) [ok]: BLPOP: single existing list - listpack (2 ms) [ok]: BLPOP: multiple existing lists - listpack (2 ms) [ok]: BLPOP: second list has an entry - listpack (2 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (2 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (2 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (2 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (2 ms) [ok]: BLMOVE right left - listpack (2 ms) [ok]: BLMOVE right right - listpack (2 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (2 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (2 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (2 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [5/91 done]: unit/keyspace (2 seconds) Testing unit/other [ok]: BLMPOP with multiple blocked clients (4 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (2 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (2 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (2 ms) [ok]: MASTERAUTH test with binary password (1129 ms) [ok]: Coverage: HELP commands (3 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (1 ms) [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: SAVE - make sure there are all the types as values (120 ms) [ok]: stats: instantaneous metrics (1603 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (1 ms) [ok]: MULTI where commands alter argc/argv (1 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: XCLAIM can claim PEL items from another consumer (604 ms) [ok]: stats: debug metrics (112 ms) [ok]: EXEC fail on lazy expired WATCHed key (103 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (4 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (1 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (1 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (2 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (2 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [7/91 done]: unit/info (2 seconds) Testing unit/quit [ok]: QUIT returns OK (1 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [8/91 done]: unit/quit (1 seconds) Testing unit/aofrw [ok]: XCLAIM without JUSTID increments delivery count (404 ms) [ok]: FUZZ stresser with data model binary (698 ms) [ok]: BRPOPLPUSH timeout (1018 ms) [ok]: SWAPDB awakes blocked client (2 ms) [ok]: XCLAIM same consumer (204 ms) [ok]: Hash fuzzing #1 - 512 fields (1692 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2102 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (2 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (1 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (227 ms) [ok]: Very big payload random access (3018 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (301 ms) [ok]: WATCH will consider touched expired keys (1108 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (604 ms) [ok]: MULTI / EXEC is not propagated (single write command) (41 ms) [ok]: FUZZ stresser with data model alpha (741 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: XAUTOCLAIM as an iterator (204 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (2 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XINFO FULL output (5 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (101 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (99 ms) [ok]: Consumer seen-time and active-time (205 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (2 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: XADD mass insertion and XLEN (2945 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (2 ms) [ok]: XRANGE COUNT works as expected (1 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: Hash fuzzing #2 - 512 fields (1162 ms) [ok]: SETEX - Wait for the key to expire (1101 ms) [ok]: SETEX - Wrong time parameter (1 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: MULTI / EXEC with REPLICAOF (102 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: XREADGROUP with NOACK creates consumer (100 ms) [ok]: FUZZ stresser with data model compr (711 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (251 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (35 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1005 ms) [ok]: BLPOP when new key is moved into place (2 ms) [ok]: BLPOP when result key is created by SORT..STORE (2 ms) [ok]: BLMPOP_LEFT when new key is moved into place (2 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (2 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (2 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: BLPOP: with non-integer timeout (2 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: XRANGE can be used to iterate the whole stream (524 ms) [ok]: Consumer group read counter and lag in empty streams (3 ms) [ok]: Consumer group read counter and lag sanity (8 ms) [ok]: Big Quicklist: SORT BY key (820 ms) [ok]: Consumer group lag with XDELs (15 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (2 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (4 ms) [ok]: MULTI and script timeout (409 ms) [ok]: Big Quicklist: SORT BY key with limit (33 ms) [ok]: BGSAVE (214 ms) [ok]: SELECT an out of range DB (1 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (107 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (105 ms) [ok]: EXEC and script timeout (406 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (107 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (5 ms) [ok]: EXPIRE precision is now the millisecond (1103 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (1912 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (2 ms) [ok]: PSETEX can set sub-second expires (102 ms) [ok]: MULTI-EXEC body and script timeout (403 ms) [ok]: Big Quicklist: SORT BY hash field (801 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: ZDIFF fuzzing - listpack (5012 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (3 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (2 ms) [ok]: PEXPIRE can set sub-second expires (103 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (1 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (2 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (1 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (2 ms) [ok]: ZREVRANGE basics - skiplist (2 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (2 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (4 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (3 ms) [ok]: ZLEXCOUNT advanced - skiplist (2 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (11 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (5 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (12 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (1 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (1 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (1 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (1 ms) [ok]: BLPOP: timeout (1063 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: BLPOP: arguments are empty (3 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (2 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (23 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (1540 ms) [ok]: PEXPIREAT can set sub-second expires (203 ms) [ok]: TTL returns time to live in seconds (1 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (1 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: Hash table: SORT BY key (17 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (243 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: Hash table: SORT BY hash field (16 ms) [ok]: Check consistency of different data types after a reload (972 ms) [ok]: Hash ziplist of various encodings (92 ms) [ok]: Hash ziplist of various encodings - sanitize dump (5 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: just EXEC and script timeout (405 ms) [ok]: exec with write commands and state change (2 ms) [9/91 done]: unit/type/hash (6 seconds) Testing unit/acl [ok]: exec with read commands and stale replica state change (31 ms) [ok]: EXEC with only read commands should not be rejected when OOM (2 ms) [ok]: EXEC with at least one use-memory command should fail (2 ms) [ok]: Blocking commands ignores the timeout (2 ms) [10/91 done]: unit/type/stream-cgroups (6 seconds) Testing unit/acl-v2 [ok]: MULTI propagation of PUBLISH (61 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (1 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (1 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: By default, only default user is able to subscribe to any shard channel (2 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (2 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (1 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (1 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: blocked command gets rejected when reprocessed after permission change (3 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: Test basic multiple selectors (2 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: Test deleting selectors (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (1 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (1 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: Test flexible selector definition (3 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: Test separate read permission (2 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: Test separate write permission (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: Validate read and write permissions format (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (2 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (3 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: Test SET with separate write permission (2 ms) [ok]: Same dataset digest if saving/reloading as AOF? (266 ms) [ok]: Test SET with read and write permissions (2 ms) [ok]: Test BITFIELD with separate read permission (2 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (2 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (3 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: MULTI propagation of SCRIPT LOAD (102 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: Test basic dry run functionality (1 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: ACL GETUSER provides reasonable results (19 ms) [ok]: Test various odd commands for key permissions (5 ms) [ok]: Existence test commands are not marked as access (2 ms) [ok]: ACL GETUSER provides correct results (6 ms) [ok]: ACL CAT with illegal arguments (1 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: Intersection cardinaltiy commands are access commands (2 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (2 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (3 ms) [ok]: Cardinality commands require some type of permission to execute (3 ms) [ok]: Test sharded channel permissions (2 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (6 ms) [ok]: ACL LOG shows failed command executions at toplevel (2 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: Test sort with ACL permissions (3 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (1 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (2 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (2 ms) [ok]: ACL LOG can log failed auth attempts (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (4 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (1 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (5 ms) [ok]: ACL-Metrics invalid command accesses (4 ms) [ok]: ACL-Metrics invalid key accesses (3 ms) [ok]: ACL-Metrics invalid channels accesses (4 ms) [ok]: MULTI propagation of EVAL (100 ms) [ok]: SDIFF fuzzing (5083 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (1 ms) [ok]: SDIFFSTORE against non-set should throw error (3 ms) [ok]: SDIFFSTORE should handle non existing key as empty (2 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (2 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (2 ms) [ok]: SUNION against non-set should throw error (2 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (2 ms) [ok]: SUNIONSTORE should handle non existing key as empty (2 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (2 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (9 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (1 ms) [ok]: SRANDMEMBER - intset (8 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (3 ms) [ok]: SPOP with - intset (3 ms) [ok]: SPOP with - hashtable (5 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (5 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (3 ms) [ok]: SPOP new implementation: code path #2 intset (3 ms) [ok]: SPOP new implementation: code path #3 intset (3 ms) [ok]: SPOP new implementation: code path #1 listpack (3 ms) [ok]: SPOP new implementation: code path #2 listpack (4 ms) [ok]: Test behavior of loading ACLs (2 ms) [ok]: SPOP new implementation: code path #3 listpack (3 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (211 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: default: load from include file, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: Redis should actively expire keys incrementally (603 ms) [11/91 done]: unit/acl-v2 (0 seconds) Testing unit/latency-monitor [ok]: MULTI propagation of XREADGROUP (102 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: ACL load and save (56 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (184 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (1 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (1 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (29 ms) [ok]: ACL load and save with restricted channels (94 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (2 ms) [ok]: SRANDMEMBER with - intset (28 ms) [ok]: SRANDMEMBER with - hashtable (30 ms) [ok]: MULTI with BGREWRITEAOF (230 ms) [ok]: SRANDMEMBER histogram distribution - listpack (97 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (1 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: SRANDMEMBER histogram distribution - intset (102 ms) [ok]: BRPOP: timeout (1071 ms) [ok]: BRPOP: arguments are empty (3 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (111 ms) [ok]: XREVRANGE returns the reverse of XRANGE (2259 ms) [ok]: XRANGE exclusive ranges (4 ms) [ok]: XREAD with non empty stream (1 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: MULTI with config set appendonly (277 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (1 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: MULTI with FLUSHALL and AOF (7 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [12/91 done]: unit/multi (5 seconds) Testing integration/block-repl [ok]: Redis should lazy expire keys (1003 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: Test loading an ACL file with duplicate users (3 ms) [ok]: Test loading an ACL file with duplicate default user (3 ms) [ok]: Test loading duplicate users in config on startup (12 ms) [ok]: BLMPOP_LEFT: timeout (1071 ms) [ok]: BLMPOP_LEFT: arguments are empty (2 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: ACL from config file and config rewrite (215 ms) [13/91 done]: unit/acl (2 seconds) Testing integration/replication [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (1 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (1 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (1 ms) [ok]: SETNX against expired volatile key (3021 ms) [ok]: GETEX EX option (1 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (1 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: First server should have role slave after SLAVEOF (1003 ms) [ok]: GETDEL propagate as DEL command to replica (83 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2241 ms) [ok]: GETEX without argument does not propagate to replica (100 ms) [ok]: MGET (11 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (1 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (1 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (1 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (1 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (1 ms) [ok]: SETBIT against integer-encoded key (0 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: XREAD with non empty second stream (1896 ms) [ok]: Blocking XREAD waiting new data (3 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: Blocking XREAD will not reply with an empty array (110 ms) [ok]: BLMPOP_RIGHT: timeout (1074 ms) [ok]: BLMPOP_RIGHT: arguments are empty (2 ms) [ok]: BLPOP inside a transaction (0 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD: XADD + DEL should not awake client (3 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (2 ms) [ok]: XREAD with same stream name multiple times should work (2 ms) [ok]: XREAD + multiple XADD inside transaction (2 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (2 ms) [ok]: SETBIT fuzzing (471 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (2 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: SCAN regression test for issue #4906 (7699 ms) [ok]: BLMPOP propagate as pop with count command to replica (198 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [14/91 done]: unit/scan (9 seconds) Testing integration/replication-2 [ok]: LPUSHX, RPUSHX - quicklist (48 ms) [ok]: LINSERT - quicklist (45 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (59 ms) [ok]: LINDEX random access - listpack (44 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (96 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (1 ms) [ok]: Big Hash table: SORT BY key (800 ms) [ok]: LINDEX consistency test - listpack (121 ms) [ok]: Big Hash table: SORT BY key with limit (36 ms) [ok]: LINDEX random access - listpack (89 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (188 ms) [ok]: Test latency events logging (3402 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: LINDEX consistency test - quicklist (60 ms) [ok]: LINDEX random access - quicklist (43 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (94 ms) [ok]: LTRIM stress testing - quicklist (9678 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (1558 ms) [ok]: APPEND basics (1 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: LINDEX consistency test - quicklist (118 ms) [ok]: LINDEX random access - quicklist (87 ms) [ok]: GETRANGE fuzzing (1189 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (1 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (1 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (1 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (1 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (0 ms) [ok]: Extended SET EX option (1 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (1 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (1 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (9454 ms) [ok]: Big Hash table: SORT BY hash field (818 ms) [15/91 done]: unit/type/string (10 seconds) Testing integration/replication-3 [ok]: SORT GET # (0 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (4 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (1 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (2 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (181 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: SORT regression for issue #19, sorting floats (27 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (1 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: APPEND fuzzing (391 ms) [ok]: RPOPLPUSH base case - quicklist (45 ms) [ok]: LMOVE left left base case - quicklist (44 ms) [ok]: SORT speed, 100 element list BY key, 100 times (44 ms) [ok]: LMOVE left right base case - quicklist (44 ms) [ok]: FLUSHDB (111 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (49 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (14 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (2 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (1 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: LMOVE right left base case - quicklist (44 ms) [ok]: SORT speed, 100 element list directly, 100 times (27 ms) [ok]: SORT speed, 100 element list BY , 100 times (22 ms) [ok]: SETRANGE with huge offset (4 ms) [ok]: LMOVE right right base case - quicklist (44 ms) [16/91 done]: unit/sort (11 seconds) Testing integration/replication-4 [ok]: ZDIFF fuzzing - skiplist (5019 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZPOP/ZMPOP against wrong type (2 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (44 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (43 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: ZMPOP propagate as pop with count command to replica (86 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (43 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2325 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (44 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (44 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (88 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (198 ms) [ok]: ZMPOP readraw in RESP3 (2 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (94 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (89 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (87 ms) [ok]: First server should have role slave after REPLICAOF (2 ms) [ok]: BZMPOP readraw in RESP3 (198 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (18 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (88 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (88 ms) [ok]: XDEL fuzz test (2339 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (44 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (198 ms) [ok]: ZMPOP readraw in RESP2 (2 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (44 ms) [ok]: Don't rehash if redis has child process (621 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (44 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (292 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (44 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (44 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: BZMPOP readraw in RESP2 (199 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (1 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (45 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (44 ms) [ok]: Process title set as expected (2 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (44 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (44 ms) [ok]: ZUNIONSTORE result is sorted (140 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (1 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (1 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [17/91 done]: unit/other (10 seconds) Testing integration/replication-psync [ok]: ZSCORE - listpack (32 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (44 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (2 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (2 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: ZMSCORE - listpack (32 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (47 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (65 ms) [ok]: ZSET sorting stresser - listpack (44 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (86 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (2 ms) [ok]: Mass RPOP/LPOP - listpack (42 ms) [ok]: Mass RPOP/LPOP - listpack (97 ms) [ok]: LMPOP with illegal argument (2 ms) [ok]: LMPOP single existing list - quicklist (134 ms) [ok]: Slave should be able to synchronize with the master (203 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (19 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2821 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: LMPOP multiple existing lists - quicklist (176 ms) [ok]: LMPOP single existing list - listpack (4 ms) [ok]: LMPOP multiple existing lists - listpack (4 ms) [ok]: LMPOP propagate as pop with count command to replica (102 ms) [ok]: LRANGE basics - quicklist (48 ms) [ok]: LRANGE inverted indexes - quicklist (47 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (46 ms) [ok]: LRANGE out of range negative end index - quicklist (48 ms) [ok]: LRANGE basics - listpack (4 ms) [ok]: LRANGE inverted indexes - listpack (2 ms) [ok]: LRANGE out of range indexes including the full list - listpack (2 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: Slave should be able to synchronize with the master (103 ms) [ok]: LTRIM basics - quicklist (536 ms) [ok]: LTRIM out of range negative end index - quicklist (87 ms) [ok]: LSET - quicklist (45 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (12 ms) [ok]: LTRIM out of range negative end index - listpack (2 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (48 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (43 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (1 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (43 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (1 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (1 ms) [ok]: LREM deleting objects that may be int encoded - listpack (0 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (3 ms) [ok]: BLPOP/BLMOVE should increase dirty (3 ms) [ok]: client unblock tests (6 ms) [ok]: client unblock tests (4 ms) [ok]: List listpack -> quicklist encoding conversion (5 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2004 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (68 ms) [ok]: EXPIRE with NX option on a key with ttl (1 ms) [ok]: EXPIRE with NX option on a key without ttl (0 ms) [ok]: EXPIRE with XX option on a key with ttl (1 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (1 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: EXPIRE with LT option on a key with lower ttl (1 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (1 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (1 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: List listpack -> quicklist encoding conversion (178 ms) [ok]: Detect write load to master (1002 ms) [ok]: Redis should not propagate the read command on lazy expire (91 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: List quicklist -> listpack encoding conversion (228 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: List encoding conversion when RDB loading (150 ms) [18/91 done]: unit/expire (13 seconds) Testing integration/replication-buffer [ok]: List invalid list-max-listpack-size config (93 ms) [ok]: List of various encodings (103 ms) [ok]: List of various encodings - sanitize dump (4 ms) [ok]: Unblock fairness is kept while pipelining (3 ms) [ok]: Unblock fairness is kept during nested unblock (3 ms) [ok]: Blocking command accounted only once in commandstats (3 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (56 ms) [19/91 done]: unit/type/list (14 seconds) Testing integration/shutdown [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (2967 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (246 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (393 ms) [ok]: MASTER and SLAVE consistency with expire (4766 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (39 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (84 ms) [ok]: MIGRATE cached connections are released after some time (15002 ms) [ok]: MIGRATE is able to migrate a key between two instances (230 ms) [ok]: MIGRATE is able to copy a key between two instances (229 ms) [ok]: Test replication with parallel clients writing in different DBs (5357 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (220 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (2010 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (978 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: MIGRATE propagates TTL correctly (221 ms) [ok]: All replicas share one global replication buffer (109 ms) [ok]: Replication buffer will become smaller when no replica uses (5 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (6846 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (1 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [20/91 done]: unit/latency-monitor (11 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (1 ms) [ok]: Short read: Server should start if load-truncated is yes (2 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Bad format: Server should have logged an error (1 ms) [ok]: Unfinished MULTI: Server should have logged an error (2 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1005 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (7 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (6 ms) [ok]: Short read: Utility should be able to fix the AOF (7 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (1 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2005 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1003 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Set instance A as slave of B (102 ms) [ok]: INCRBYFLOAT replication, should not remove expire (4 ms) [ok]: GETSET replication (3 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (3 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1246 ms) [ok]: LTRIM stress testing - listpack (9414 ms) [21/91 done]: unit/type/list-2 (19 seconds) Testing integration/aof-race [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (21 ms) [ok]: ZMSCORE - skiplist (25 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (71 ms) [ok]: ZSET sorting stresser - skiplist (35 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (9441 ms) [ok]: BRPOPLPUSH replication, list exists (1003 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: XRANGE fuzzing (8579 ms) [ok]: XREVRANGE regression test for issue #5006 (2 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (2 ms) [ok]: XADD streamID edge (1 ms) [ok]: XTRIM with MAXLEN option basic test (109 ms) [ok]: XADD with LIMIT consecutive calls (12 ms) [ok]: XTRIM with ~ is limited (12 ms) [ok]: XTRIM without ~ is not limited (11 ms) [ok]: XTRIM without ~ and with LIMIT (12 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6493 ms) [22/91 done]: integration/aof-race (1 seconds) Testing integration/aof-multi-part [ok]: XADD with MAXLEN > xlen can propagate correctly (21 ms) [ok]: Multi Part AOF can't load data when some file missing (118 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (117 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (3735 ms) [ok]: XADD with MINID > lastid can propagate correctly (11 ms) [ok]: Shutting down master waits for replica timeout (2099 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (116 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (8306 ms) [ok]: SRANDMEMBER with a dict containing long chain (13864 ms) [ok]: SMOVE basics - from regular set to intset (3 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (1 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (2 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (121 ms) [23/91 done]: integration/replication-2 (12 seconds) Testing integration/rdb [ok]: Slave should be able to synchronize with the master (165 ms) [ok]: Detect write load to master (1 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (30 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (118 ms) [ok]: test old version rdb file (1 ms) [ok]: BLMOVE (left, left) replication, list exists (1003 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (2 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (117 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (16 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (116 ms) [ok]: RDB encoding loading test (6 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (2007 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (119 ms) [ok]: XADD with ~ MINID can propagate correctly (15 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (119 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (118 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (13 ms) [ok]: Replication of an expired key does not delete the expired key (519 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Slave is able to evict keys created in writable slaves (6003 ms) [ok]: Multi Part AOF can start when no aof and no manifest (213 ms) [ok]: Writable replica doesn't return expired keys (106 ms) [ok]: PFCOUNT updates cache on readonly replica (3 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (25 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (103 ms) [ok]: Shutting down master waits for replica then fails (1263 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (18783 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (199 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (678 ms) [ok]: XADD can CREATE an empty stream (0 ms) [ok]: XSETID can set a specific ID (1 ms) [ok]: XSETID cannot SETID with smaller ID (1 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (1 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (1 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: BLMOVE (left, right) replication, list exists (1005 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (3 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: Test RDB stream encoding (174 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (2271 ms) [ok]: Test RDB stream encoding - sanitize dump (66 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (246 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (2 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (5 ms) [ok]: Maximum XDEL ID behaves correctly (2 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (223 ms) [ok]: Server should not start if RDB file can't be open (1 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: Shutting down master waits for replica then aborted (528 ms) [24/91 done]: integration/shutdown (8 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can load data when manifest add new k-v (297 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (338 ms) [25/91 done]: integration/replication-3 (12 seconds) Testing integration/corrupt-dump-fuzzer [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (28 ms) [ok]: intsets implementation stress testing (1868 ms) [ok]: corrupt payload: #7445 - with sanitize (230 ms) [26/91 done]: unit/type/set (22 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Multi Part AOF can load data when some AOFs are empty (249 ms) [ok]: Empty stream can be rewrite into AOF correctly (373 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (222 ms) [ok]: BLMOVE (right, left) replication, list exists (1004 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (2 ms) [ok]: Test FLUSHALL aborts bgsave (467 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (300 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: corrupt payload: invalid zlbytes header (232 ms) [ok]: bgsave resets the change counter (204 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (502 ms) [ok]: XGROUP HELP should not have unexpected options (1 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: corrupt payload: valid zipped hash header, dup records (224 ms) [27/91 done]: unit/type/stream (23 seconds) Testing integration/convert-ziplist-hash-on-load [28/91 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: corrupt payload: quicklist big ziplist prev len (234 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (944 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (420 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (1 ms) [ok]: corrupt payload: quicklist small ziplist prev len (236 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [29/91 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/logging [30/91 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/psync2 [ok]: BLMOVE (right, right) replication, list exists (1005 ms) [ok]: corrupt payload: quicklist ziplist wrong count (222 ms) [ok]: Crash report generated on SIGABRT (6 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (508 ms) [ok]: Crash report generated on DEBUG SEGFAULT (3 ms) [31/91 done]: integration/logging (0 seconds) Testing integration/psync2-reg [ok]: BLPOP followed by role change, issue #2473 (206 ms) [ok]: corrupt payload: #3080 - quicklist (241 ms) [ok]: corrupt payload: quicklist with empty ziplist (230 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1005 ms) [ok]: BZPOPMIN with same key multiple times should work (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (477 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (0 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (230 ms) [ok]: client freed during loading (1485 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (126 ms) [ok]: FLUSHDB / FLUSHALL should replicate (193 ms) [ok]: ROLE in master reports master with a slave (1 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (221 ms) [ok]: AOF fsync always barrier issue (6479 ms) [ok]: corrupt payload: #3080 - ziplist (223 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (191 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (116 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3141 ms) [ok]: GETEX should not append to AOF (2 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (231 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (353 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (1 ms) [ok]: PSYNC2 #3899 regression: setup (1006 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (2 ms) [ok]: Test RDB load info (810 ms) [ok]: Unknown command: Server should have logged an error (2 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (971 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (235 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (113 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (3 ms) [ok]: corrupt payload: listpack invalid size header (223 ms) [ok]: corrupt payload: listpack too long entry len (133 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (2 ms) [ok]: corrupt payload: listpack very long entry len (131 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (627 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (104 ms) [ok]: failed bgsave prevents writes (339 ms) [ok]: corrupt payload: listpack too long entry prev len (220 ms) [32/91 done]: integration/rdb (5 seconds) Testing integration/psync2-pingoff [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1207 ms) [33/91 done]: integration/replication-buffer (12 seconds) Testing integration/psync2-master-restart [ok]: MIGRATE can correctly transfer large values (9894 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (197 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (4 ms) [ok]: BZMPOP with multiple blocked clients (7 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: corrupt payload: stream with duplicate consumers (225 ms) [ok]: MIGRATE can correctly transfer hashes (224 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (294 ms) [ok]: BZMPOP propagate as pop with count command to replica (283 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (3 ms) [ok]: corrupt payload: hash ziplist with duplicate records (225 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: corrupt payload: hash listpack with duplicate records (229 ms) [ok]: Generate timestamp annotations in AOF (530 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (135 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: MIGRATE timeout actually works (646 ms) [ok]: corrupt payload: hash ziplist uneven record count (230 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: MIGRATE can migrate multiple keys at once (226 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: corrupt payload: hash duplicate records (229 ms) [ok]: PSYNC2 pingoff: setup (1004 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: AOF enable will create manifest file (847 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (232 ms) [ok]: ZSET skiplist order consistency when elements are moved (1050 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (1 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (1 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (1 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (0 ms) [ok]: corrupt payload: hash empty zipmap (232 ms) [ok]: ZRANDMEMBER - listpack (9 ms) [ok]: ZRANDMEMBER - skiplist (10 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (222 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (136 ms) [ok]: Truncate AOF to specific timestamp (706 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (132 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (231 ms) [ok]: ZRANDMEMBER with - skiplist (393 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1200 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (229 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (225 ms) [ok]: PSYNC2: cluster is consistent after failover (4 ms) [34/91 done]: unit/dump (28 seconds) Testing integration/failover [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (229 ms) [ok]: ZRANDMEMBER with - listpack (350 ms) [ok]: zset score double range (1 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (17 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (8 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (2 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [35/91 done]: unit/type/zset (29 seconds) Testing integration/redis-cli [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (8000 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (223 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: Interactive CLI: Status reply (60 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: setup replication for following tests (139 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (1 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: Interactive CLI: Integer reply (61 ms) [ok]: corrupt payload: fuzzer findings - hash crash (223 ms) [ok]: Interactive CLI: Bulk reply (61 ms) [ok]: Interactive CLI: Multi-bulk reply (63 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (222 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (226 ms) [ok]: Interactive CLI: Parsing quotes (429 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1915 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (224 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (9995 ms) [ok]: failover command to specific replica works (846 ms) [ok]: corrupt payload: fuzzer findings - empty intset (221 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (232 ms) [ok]: Interactive CLI: Subscribed mode (609 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1149 ms) [ok]: Detect write load to master (1002 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (2242 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (222 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (826 ms) [ok]: EVAL can process writes from AOF in read-only replicas (236 ms) [ok]: Test redis-check-aof for old style resp AOF (7 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (418 ms) [ok]: Test redis-check-aof for old style resp AOF - has data in the same format as manifest (7 ms) [ok]: Non-interactive TTY CLI: Status reply (4 ms) [ok]: Non-interactive TTY CLI: Integer reply (3 ms) [ok]: Non-interactive TTY CLI: Bulk reply (2 ms) [ok]: Test redis-check-aof for old style rdb-preamble AOF (8 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (230 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (4 ms) [ok]: Test redis-check-aof for Multi Part AOF with resp AOF base (11 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (9 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (6 ms) [ok]: Test redis-check-aof for Multi Part AOF with rdb-preamble AOF base (11 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (49 ms) [ok]: Non-interactive non-TTY CLI: Status reply (2 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (2 ms) [ok]: Test redis-check-aof for Multi Part AOF contains a format error (54 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: failover command to any replica works (842 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in fix mode (21 ms) [ok]: Test redis-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (7 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (55 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (4 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (6 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (14 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (4 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (17 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (225 ms) [ok]: AOF enable/disable auto gc (443 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (224 ms) [ok]: failover to a replica with force works (440 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (230 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (140 ms) [ok]: AOF can produce consecutive sequence number after reload (630 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (704 ms) [36/91 done]: integration/aof (15 seconds) Testing integration/redis-benchmark [ok]: corrupt payload: fuzzer findings - stream integrity check issue (232 ms) [ok]: failover with timeout aborts if replica never catches up (557 ms) [ok]: failovers can be aborted (30 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (136 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1636 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (380 ms) [ok]: benchmark: set,get (8 ms) [ok]: benchmark: connecting using URI set,get (5 ms) [ok]: benchmark: connecting using URI with authentication set,get (5 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (228 ms) [ok]: benchmark: full test suite (115 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (232 ms) [ok]: failover aborts if target rejects sync request (538 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (135 ms) [ok]: benchmark: multi-thread set,get (510 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (232 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: AOF will trigger limit when AOFRW fails many times (741 ms) [ok]: benchmark: pipelined full set,get (140 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (10165 ms) [ok]: benchmark: arbitrary command (9 ms) [ok]: benchmark: keyspace length (75 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (4 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (225 ms) [37/91 done]: integration/redis-benchmark (1 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - empty hash ziplist (231 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (134 ms) [38/91 done]: integration/failover (5 seconds) Testing unit/pubsub [ok]: Test replication with blocking lists and sorted sets operations (25005 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (234 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 30149) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (1 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (2 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: PUBLISH/PSUBSCRIBE basics (2 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (3 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [39/91 done]: integration/block-repl (26 seconds) Testing unit/pubsubshard [ok]: PubSub messages with CLIENT REPLY OFF (91 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (2 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (2 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: Keyspace notifications: we receive keyspace notifications (46 ms) [ok]: Make the old master a replica of the new one and check conditions (1009 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (4 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (3 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (3 ms) [ok]: Keyspace notifications: we receive keyevent notifications (44 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (226 ms) [ok]: Keyspace notifications: we can receive both kind of events (2 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (2 ms) [ok]: Keyspace notifications: list events test (2 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (2 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (4 ms) [ok]: PubSubShard with CLIENT REPLY OFF (96 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: corrupt payload: fuzzer findings - huge string (232 ms) [ok]: Keyspace notifications: expired events (background expire) (176 ms) [ok]: Keyspace notifications: evicted events (4 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (3 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (1 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (2 ms) [40/91 done]: unit/pubsub (1 seconds) Testing unit/slowlog [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (222 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: setup replication for following tests (102 ms) [ok]: publish message to master and receive on replica (2 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (131 ms) [ok]: dismiss all data types memory (1249 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (201 ms) [ok]: Dumping an RDB - functions only: no (3605 ms) [ok]: SLOWLOG - max entries is correctly handled (12 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (2 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (0 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (229 ms) [ok]: dismiss client output buffer (291 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (4 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (2 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (134 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (5 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: dismiss client query buffer (155 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (202 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (2968 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (235 ms) [41/91 done]: unit/pubsubshard (2 seconds) Testing unit/scripting [ok]: SLOWLOG - can clean older entries (202 ms) [42/91 done]: integration/psync2-master-restart (9 seconds) Testing unit/functions [ok]: corrupt payload: fuzzer findings - empty quicklist (229 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (2 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (1 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (2 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (4 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (1 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (1 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (16 ms) [ok]: FUNCTION - test debug reload different options (34 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (24 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (0 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (1 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (1 ms) [ok]: FUNCTION - test fcall_ro with read only commands (0 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (1 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: corrupt payload: fuzzer findings - empty zset (225 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (245 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (2 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (2 ms) [ok]: SLOWLOG - can be disabled (403 ms) [ok]: SLOWLOG - count must be >= -1 (1 ms) [ok]: SLOWLOG - get all slow logs (4 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (3 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: Dumping an RDB - functions only: yes (1092 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (220 ms) [43/91 done]: unit/slowlog (1 seconds) Testing unit/maxmemory [ok]: Scan mode (84 ms) [ok]: FUNCTION - test function kill (405 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (53 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (234 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (3089 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (226 ms) [ok]: dismiss replication backlog (1333 ms) [44/91 done]: integration/aof-multi-part (16 seconds) Testing unit/introspection [ok]: FUNCTION - test script kill not working on function (403 ms) [45/91 done]: integration/dismiss-mem (3 seconds) Testing unit/introspection-2 [ok]: eviction due to input buffer of a dead client, client eviction: false (465 ms) [ok]: PING (3 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (1 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (3 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (6 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (234 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: CLIENT KILL close the client connection during bgsave (81 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (46 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (135 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (43 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (48 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (0 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (2 ms) [ok]: MONITOR correctly handles multi-exec cases (2 ms) [ok]: MONITOR log blocked command only once (3 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (1 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (1 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (0 ms) [ok]: CLIENT SETINFO invalid args (1 ms) [ok]: RESET does NOT clean library name (1 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (131 ms) [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (2 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: EVAL does not leak in the Lua stack (1131 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (2 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (223 ms) [ok]: Script return recursive object (202 ms) [ok]: Script check unpack with massive arguments (65 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (730 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (233 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (1 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (66 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (2527 ms) [ok]: Disconnecting the replica from master instance (103 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (1 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (231 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (223 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (464 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: CONFIG save params special case handled properly (1043 ms) [ok]: CONFIG sanity (36 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (88 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (223 ms) [ok]: Timedout script does not cause a false dead client (84 ms) [ok]: Connecting as a replica (2124 ms) [ok]: CONFIG REWRITE sanity (220 ms) [ok]: Timedout script link is still usable after Lua returns (141 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (230 ms) [46/91 done]: integration/corrupt-dump (16 seconds) Testing unit/limits [ok]: eviction due to output buffers of pubsub, client eviction: true (470 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (0 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (393 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (1 ms) [ok]: LIBRARIES - test registration failure revert the entire load (1 ms) [ok]: LIBRARIES - test registration function name collision (1 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (1 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (1 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (1 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (2 ms) [ok]: LIBRARIES - delete removed all functions on library (1 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: Timedout scripts and unblocked command (621 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (387 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (781 ms) [ok]: CONFIG SET with multiple args (2 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (4 ms) [ok]: CONFIG SET duplicate configs (1 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (5 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (203 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (10 ms) [ok]: redis-server command line arguments - error cases (75 ms) [ok]: ziplist implementation: value encoding and backlink (8925 ms) [ok]: Replication: commands with many arguments (issue #1221) (16798 ms) [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (1 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (1 ms) [ok]: LIBRARIES - named arguments, bad callback type (1 ms) [ok]: LIBRARIES - named arguments, bad description (1 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (1 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (5 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (1 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (2 ms) [ok]: FUNCTION - verify allow-omm allows running any command (1 ms) [ok]: spopwithcount rewrite srem command (101 ms) [ok]: redis-server command line arguments - allow passing option name and option value in the same arg (230 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: Check if maxclients works refusing connections (909 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (2 ms) [47/91 done]: unit/limits (1 seconds) Testing unit/obuf-limits [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (1 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (1 ms) [ok]: FUNCTION - deny oom (0 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (2 ms) [ok]: FUNCTION - redis version api (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (550 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (61 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (0 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (1 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (1 ms) [ok]: redis-server command line arguments - wrong usage that we support anyway (232 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [48/91 done]: unit/functions (4 seconds) Testing unit/bitops [ok]: CONFIG SET client-output-buffer-limit (2 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (1 ms) [ok]: BITCOUNT against test vector #1 (1 ms) [ok]: BITCOUNT against test vector #2 (1 ms) [ok]: BITCOUNT against test vector #3 (1 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (1 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3002 ms) [ok]: redis-server command line arguments - allow option value to use the `--` prefix (227 ms) [ok]: Piping raw protocol (1663 ms) [ok]: Options -X with illegal argument (8 ms) [ok]: DUMP RESTORE with -x option (10 ms) [ok]: DUMP RESTORE with -X option (10 ms) [49/91 done]: integration/redis-cli (10 seconds) Testing unit/bitfield [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (1 ms) [ok]: redis-server command line arguments - option name and option value in the same arg and `--` prefix (228 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (1 ms) [ok]: BITFIELD with only key as argument (1 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (1 ms) [ok]: BITFIELD chaining of multiple commands (1 ms) [ok]: BITFIELD unsigned overflow wrap (2 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (2 ms) [ok]: BITFIELD signed overflow sat (2 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (544 ms) [ok]: BITCOUNT fuzzing without start/end (394 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9687 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (444 ms) [ok]: BITFIELD overflow detection fuzzing (509 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (2 ms) [ok]: Test selective replication of certain Redis commands from Lua (3 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: BITCOUNT fuzzing with start/end (679 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: BITCOUNT regression test for github issue #582 (1 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (1 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (1 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: Slave should be able to synchronize with the master (149 ms) [ok]: Detect write load to master (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (493 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (1827 ms) [ok]: BITOP and fuzzing (311 ms) [ok]: BITFIELD overflow wrap fuzzing (600 ms) [ok]: BITFIELD regression for #3221 (1 ms) [ok]: BITFIELD regression for #3564 (3 ms) [ok]: BITFIELD_RO with only key as argument (1 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: redis-server command line arguments - save with empty input (1140 ms) [ok]: redis-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (225 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (452 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (1 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (4 ms) [ok]: TIME command using cached time (11 ms) [ok]: BITOP or fuzzing (408 ms) [ok]: BITFIELD: setup slave (102 ms) [ok]: BITFIELD: write on master, read on slave (2 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (6 ms) [ok]: Data divergence is allowed on writable replicas (3 ms) [50/91 done]: unit/bitfield (2 seconds) Testing unit/geo [ok]: Chained replicas disconnect when replica re-connect with the same master (2925 ms) [51/91 done]: integration/replication-4 (30 seconds) Testing unit/memefficiency [ok]: cannot modify protected configuration - local (7 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (2 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (1 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: GEO with wrong type src key (3 ms) [ok]: GEO with non existing src key (1 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (1 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (1 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (1 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (1 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (1 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (1 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (1 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (1 ms) [ok]: BITOP xor fuzzing (379 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (1 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (1 ms) [ok]: BITOP NOT fuzzing (37 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (1 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (5 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (1 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (4 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (511 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (255 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (19 ms) [ok]: SCRIPTING FLUSH ASYNC (10 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (1 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (252 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (312 ms) [ok]: Memory efficiency with values in range 32 (574 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (701 ms) [ok]: EVAL does not leak in the Lua stack (531 ms) [ok]: TOUCH alters the last access time of a key (3001 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (335 ms) [52/91 done]: integration/psync2-pingoff (16 seconds) Testing unit/hyperloglog [ok]: SPOP: We can call scripts rewriting client->argv from Lua (233 ms) [53/91 done]: unit/bitops (3 seconds) Testing unit/lazyfree [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 67315) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: Memory efficiency with values in range 64 (592 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9966 ms) [54/91 done]: integration/corrupt-dump-fuzzer (21 seconds) Testing unit/wait [ok]: MGET: mget shouldn't be propagated in Lua (301 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: config during loading (1374 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (710 ms) [ok]: UNLINK can reclaim memory in background (331 ms) [ok]: Setup slave (102 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (326 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (1 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (342 ms) [ok]: CONFIG REWRITE handles rename-command properly (463 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1102 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: HyperLogLog self test passes (791 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: command stats for GEOADD (1 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (1 ms) [ok]: errors stats for GEOADD (0 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (3 ms) [ok]: command stats for scripts (2 ms) [ok]: Memory efficiency with values in range 128 (719 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (1 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (3 ms) [ok]: COMMAND LIST syntax error (0 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (5 ms) [ok]: lazy free a stream with all types of metadata (121 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (1 ms) [ok]: lazy free a stream with deleted cgroup (2 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (1 ms) [ok]: SET command will not be marked with movablekeys (0 ms) [ok]: GET command will not be marked with movablekeys (1 ms) [ok]: Script return recursive object (201 ms) [ok]: MSET command will not be marked with movablekeys (0 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (1 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (1 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (1 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (1 ms) [ok]: Script check unpack with massive arguments (66 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [55/91 done]: unit/lazyfree (1 seconds) Testing unit/pause [56/91 done]: unit/introspection-2 (7 seconds) Testing unit/querybuf [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: Test read commands are not blocked by client pause (2 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (718 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (339 ms) [ok]: HyperLogLogs are promote from sparse to dense (607 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (62 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (2 ms) [ok]: Memory efficiency with values in range 1024 (688 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (2 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (2 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (2 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (2 ms) [ok]: Test clients with syntax errors will get responses immediately (1 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1069 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (83 ms) [ok]: Test both active and passive expires are skipped during client pause (103 ms) [ok]: Test that client pause starts at the end of a transaction (3 ms) [ok]: CONFIG REWRITE handles alias config properly (904 ms) [57/91 done]: unit/introspection (8 seconds) Testing unit/tls [ok]: Timedout script does not cause a false dead client (84 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (749 ms) [ok]: Timedout script link is still usable after Lua returns (139 ms) [ok]: Test when replica paused, offset would not grow (4 ms) [ok]: Test replica offset would grow after unpause (1 ms) [58/91 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (1 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [59/91 done]: unit/pause (2 seconds) Testing unit/oom-score-adj [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: CONFIG SET oom-score-adj works as expected (16 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (2 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (1 ms) [ok]: CONFIG SET oom score restored on disable (1 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (1 ms) [60/91 done]: unit/oom-score-adj (0 seconds) Testing unit/shutdown [ok]: Timedout scripts and unblocked command (570 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (120 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (755 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (4 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1104 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (14 ms) [ok]: HyperLogLog sparse encoding stress test (1210 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (1 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: Temp rdb will be deleted in signal handle (97 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: RDB save will be failed in shutdown (3 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (1 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Now use EVALSHA against the master, with both SHAs (1 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (2 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (105 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (10 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (4 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: PSYNC2 #3899 regression: verify consistency (49 ms) [ok]: query buffer resized correctly (2017 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: query buffer resized correctly when not idle (30 ms) [ok]: Tracking gets notification of lazy expired keys (101 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (2 ms) [ok]: RESP3 based basic invalidation (0 ms) [ok]: RESP3 tracking redirection (0 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (613 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms) [ok]: Able to redirect to a RESP3 client (1 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (96 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (112 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: Tracking invalidation message of eviction keys should be before response (5 ms) [ok]: Unblocked BLMOVE gets notification after response (2 ms) [ok]: Tracking gets notification on tracking table key eviction (58 ms) [61/91 done]: unit/shutdown (1 seconds) Testing unit/networking [ok]: Invalidation message received for flushall (4 ms) [ok]: Invalidation message received for flushdb (5 ms) [ok]: Test ASYNC flushall (5 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (3 ms) [ok]: Memory efficiency with values in range 16384 (2018 ms) [62/91 done]: unit/memefficiency (5 seconds) Testing unit/client-eviction [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (193 ms) [ok]: Tracking info is correct (5 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (3 ms) [ok]: Regression test for #11715 (4 ms) [ok]: CONFIG SET port number (224 ms) [ok]: RESP3 based basic invalidation with client reply off (3 ms) [ok]: RESP2 based basic invalidation with client reply off (46 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (4 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (2 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1104 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (13 ms) [ok]: client evicted due to large argv (70 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (611 ms) [ok]: client evicted due to large query buf (50 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (1 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: client evicted due to percentage of maxmemory (14 ms) [ok]: CONFIG SET bind address (224 ms) [ok]: client evicted due to large multi buf (84 ms) [63/91 done]: unit/tracking (2 seconds) Testing unit/violations [ok]: PSYNC2: cluster is consistent after failover (1 ms) [64/91 done]: integration/psync2-reg (22 seconds) Testing unit/replybufsize [ok]: SORT adds integer field to list (2 ms) [ok]: Connect a replica to the master instance (104 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: WAITAOF local copy before fsync (53 ms) [65/91 done]: unit/violations (1 seconds) Testing unit/cluster/announced-endpoints [ok]: client evicted due to watched key list (289 ms) [ok]: CONFIG SET bind-source-addr (533 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (600 ms) [ok]: verify reply buffer limits (656 ms) [ok]: Default bind address configuration handling (366 ms) [ok]: Protected mode works as expected (5 ms) [66/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (553 ms) [67/91 done]: unit/networking (2 seconds) Testing unit/cluster/cli [ok]: WAITAOF local copy everysec (1202 ms) [ok]: Test scripting debug protocol parsing (3 ms) [ok]: Test scripting debug lua stack overflow (3 ms) [ok]: WAITAOF local copy with appendfsync always (58 ms) [ok]: WAITAOF local wait and then stop aof (78 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (1 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (4 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (22686 ms) [ok]: TIME command using cached time (10 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: client evicted due to pubsub subscriptions (1554 ms) [ok]: client evicted due to tracking redirection (57 ms) [ok]: Client output buffer hard limit is enforced (9239 ms) [ok]: WAITAOF local if AOFRW was postponed (452 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (1 ms) [ok]: allow-oom shebang flag (3 ms) [ok]: no-writes shebang flag (0 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (2 ms) [ok]: query buffer resized correctly with fat argv (2977 ms) [68/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/scripting [ok]: no-writes shebang flag on replica (108 ms) [ok]: WAITAOF replica copy before fsync (167 ms) [ok]: not enough good replicas (1 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (103 ms) [ok]: Test change cluster-announce-bus-port at runtime (203 ms) [ok]: not enough good replicas state change during long script (847 ms) [ok]: allow-stale shebang flag (3 ms) [ok]: reject script do not cause a Lua stack leak (9 ms) [69/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/hostnames [ok]: Consistent eval error reporting (22 ms) [ok]: LUA redis.error_reply API (2 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (1 ms) [70/91 done]: unit/scripting (15 seconds) Testing unit/cluster/human-announced-nodename [ok]: Create 3 node cluster (2042 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9615 ms) [ok]: Perform a Resharding (181 ms) [ok]: Verify command got unblocked after resharding (2 ms) [ok]: Wait for cluster to be stable (15 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (6 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (1 ms) [ok]: Key lazy expires during key migration (14 ms) [ok]: Coverage: Basic cluster commands (19 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAITAOF replica copy everysec (1804 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (2 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (2 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (2 ms) [ok]: Script no-cluster flag (1 ms) [71/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/multi-slot-operations [72/91 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/slot-ownership [ok]: ziplist implementation: encoding stress testing (12557 ms) [73/91 done]: unit/type/list-3 (51 seconds) Testing unit/cluster/links [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 103936) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (0 ms) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (74 ms) [ok]: Kill a cluster node and wait for fail state (1586 ms) [ok]: Verify command got unblocked after cluster failure (1 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1140 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Set cluster human announced nodename and let it propagate (130 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4290 ms) [ok]: client evicted due to client tracking prefixes (4566 ms) [ok]: client evicted due to output buf (14 ms) [ok]: client no-evict on (47 ms) [ok]: Set cluster hostnames and verify they are propagated (225 ms) [ok]: client no-evict off (48 ms) [ok]: Update hostnames and make sure they are all eventually propagated (217 ms) [ok]: Detect write load to master (1002 ms) [ok]: avoid client eviction when client is freed by output buffer limit (168 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (215 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (1 ms) [ok]: Continuous slots distribution (15 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (6 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (213 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (106 ms) [74/91 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: decrease maxmemory-clients causes client eviction (504 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (426 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2397 ms) [ok]: evict clients only until below limit (170 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (1 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (378 ms) [ok]: WAITAOF replica copy appendfsync always (37 ms) [ok]: evict clients in right order (large to small) (200 ms) [76/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: client total memory grows during client no-evict (129 ms) [ok]: client total memory grows during maxmemory-clients disabled (129 ms) [77/91 done]: unit/client-eviction (9 seconds) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Human nodenames are visible in log messages (3535 ms) [ok]: Functions are added to new node on redis-cli cluster add-node (3225 ms) [ok]: WAITAOF replica copy if replica is blocked (1646 ms) [78/91 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: Each node has two links with each peer (6 ms) [ok]: Validate cluster links format (0 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1002 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3802 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5031 ms) [ok]: Test restart will keep hostname information (271 ms) [ok]: Test hostname validation (1 ms) [ok]: No response for single command if client output buffer hard limit is enforced (129 ms) [ok]: WAITAOF on promoted replica (500 ms) [79/91 done]: unit/cluster/hostnames (8 seconds) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1046 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (33 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (41 ms) [ok]: Obuf limit, KEYS stopped mid-run (77 ms) [80/91 done]: unit/obuf-limits (20 seconds) [ok]: Verify that single primary marks replica as failed (3146 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6486 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2007 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (613 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 147996) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: Migrate the last slot away from a node using redis-cli (4691 ms) [ok]: Detect write load to master (1001 ms) [ok]: WAITAOF master isn't configured to do AOF (1002 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (0 ms) [ok]: WAITAOF replica isn't configured to do AOF (132 ms) [ok]: AOF rewrite during write load: RDB preamble=no (40051 ms) [ok]: Turning off AOF kills the background writing child if any (118 ms) [ok]: AOF rewrite of list with listpack encoding, string data (117 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (256 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: AOF rewrite of list with listpack encoding, int data (166 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (180 ms) [ok]: AOF rewrite of set with intset encoding, string data (110 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (348 ms) [ok]: AOF rewrite of set with intset encoding, int data (182 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (1980 ms) [ok]: redis-cli --cluster create with cluster-port (1990 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (239 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (141 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (243 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (167 ms) [ok]: PSYNC2: cluster is consistent after failover (3 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (283 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (156 ms) [ok]: WAITAOF master sends PING after last write (1219 ms) [ok]: redis-cli --cluster add-node with cluster-port (1306 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (301 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (73 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (276 ms) [ok]: Disconnect link when send buffer limit reached (8884 ms) [81/91 done]: unit/cluster/cli (17 seconds) [ok]: AOF rewrite functions (138 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (216 ms) [ok]: BGREWRITEAOF is refused if already in progress (14 ms) [82/91 done]: unit/aofrw (63 seconds) [ok]: WAITAOF master client didn't send any write command (1201 ms) [ok]: Link memory increases with publishes (726 ms) [ok]: Link memory resets after publish messages flush (925 ms) [ok]: WAITAOF master client didn't send any command (1201 ms) [83/91 done]: unit/cluster/links (16 seconds) [ok]: Verify that multiple primaries mark replica as failed (6237 ms) [84/91 done]: unit/cluster/failure-marking (14 seconds) [ok]: GEOSEARCH fuzzy test - byradius (27199 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (8095 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 194811) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (3 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (332 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3665 ms) [ok]: Detect write load to master (1001 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (21887 ms) [85/91 done]: integration/psync2 (47 seconds) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2367 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1413 ms) [ok]: setup replication for following tests (103 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (748 ms) [86/91 done]: unit/wait (33 seconds) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9703 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (1001 ms) [ok]: GEOSEARCH fuzzy test - bybox (19715 ms) [ok]: GEOSEARCH box edges fuzzy test (65 ms) [87/91 done]: unit/geo (47 seconds) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9702 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (46609 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (0 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: Slave should be able to synchronize with the master (810 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (71 ms) [ok]: Slave should be able to synchronize with the master (813 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (24123 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (6167 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6556 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (3200 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (1470 ms) [ok]: PFADD / PFCOUNT cache invalidation works (0 ms) [88/91 done]: unit/hyperloglog (61 seconds) [ok]: slave buffer are counted correctly (60303 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (8091 ms) [ok]: Slave should be able to synchronize with the master (820 ms) [ok]: Detect write load to master (0 ms) [ok]: replica buffer don't induce eviction (8092 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (269 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (20839 ms) [ok]: client tracking don't cause eviction feedback loop (1410 ms) [ok]: propagation with eviction (95 ms) [ok]: propagation with eviction in MULTI (95 ms) [ok]: lru/lfu value of the key just added (1 ms) [89/91 done]: unit/maxmemory (85 seconds) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9700 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9909 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (73 ms) [ok]: Slave should be able to synchronize with the master (1808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6612 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (26124 ms) [ok]: Slave should be able to synchronize with the master (1808 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (421 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (321 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (855 ms) [ok]: Busy script during async loading (857 ms) [ok]: Blocked commands and configs during async-loading (437 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (1 ms) Waiting for process 3559 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (8134 ms) Waiting for process 3559 to exit... Waiting for process 3559 to exit... [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) Waiting for process 3559 to exit... [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9713 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9794 ms) [90/91 done]: integration/replication-psync (163 seconds) [ok]: diskless loading short read (34531 ms) [ok]: diskless no replicas drop during rdb pipe (7257 ms) [ok]: diskless slow replicas drop during rdb pipe (4369 ms) [ok]: diskless fast replicas drop during rdb pipe (6110 ms) [ok]: diskless all replicas drop during rdb pipe (1224 ms) [ok]: diskless timeout replicas drop during rdb pipe (6352 ms) [ok]: diskless replication child being killed is collected (1439 ms) [ok]: replication child dies when parent is killed - diskless: yes (1171 ms) [ok]: replication child dies when parent is killed - diskless: no (1367 ms) [ok]: diskless replication read pipe cleanup (914 ms) [ok]: replicaof right after disconnection (1832 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (930 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (1 ms) [ok]: Discard cache master before loading transferred RDB when full sync (104 ms) [ok]: replica can handle EINTR if use diskless load (647 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (102 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (96 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (108 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (104 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (112 ms) [91/91 done]: integration/replication (218 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (1 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [91/91 done]: defrag (0 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (1 seconds) The End Execution time of different units: 0 seconds - unit/printver 0 seconds - unit/info-command 0 seconds - unit/type/incr 1 seconds - unit/protocol 2 seconds - unit/keyspace 2 seconds - unit/auth 2 seconds - unit/info 1 seconds - unit/quit 6 seconds - unit/type/hash 6 seconds - unit/type/stream-cgroups 0 seconds - unit/acl-v2 5 seconds - unit/multi 2 seconds - unit/acl 9 seconds - unit/scan 10 seconds - unit/type/string 11 seconds - unit/sort 10 seconds - unit/other 13 seconds - unit/expire 14 seconds - unit/type/list 11 seconds - unit/latency-monitor 19 seconds - unit/type/list-2 1 seconds - integration/aof-race 12 seconds - integration/replication-2 8 seconds - integration/shutdown 12 seconds - integration/replication-3 22 seconds - unit/type/set 23 seconds - unit/type/stream 1 seconds - integration/convert-zipmap-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 1 seconds - integration/convert-ziplist-hash-on-load 0 seconds - integration/logging 5 seconds - integration/rdb 12 seconds - integration/replication-buffer 28 seconds - unit/dump 29 seconds - unit/type/zset 15 seconds - integration/aof 1 seconds - integration/redis-benchmark 5 seconds - integration/failover 26 seconds - integration/block-repl 1 seconds - unit/pubsub 2 seconds - unit/pubsubshard 9 seconds - integration/psync2-master-restart 1 seconds - unit/slowlog 16 seconds - integration/aof-multi-part 3 seconds - integration/dismiss-mem 16 seconds - integration/corrupt-dump 1 seconds - unit/limits 4 seconds - unit/functions 10 seconds - integration/redis-cli 2 seconds - unit/bitfield 30 seconds - integration/replication-4 16 seconds - integration/psync2-pingoff 3 seconds - unit/bitops 21 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/lazyfree 7 seconds - unit/introspection-2 8 seconds - unit/introspection 0 seconds - unit/tls 2 seconds - unit/pause 0 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 5 seconds - unit/memefficiency 2 seconds - unit/tracking 22 seconds - integration/psync2-reg 1 seconds - unit/violations 1 seconds - unit/replybufsize 2 seconds - unit/networking 6 seconds - unit/querybuf 3 seconds - unit/cluster/announced-endpoints 15 seconds - unit/scripting 2 seconds - unit/cluster/scripting 4 seconds - unit/cluster/misc 51 seconds - unit/type/list-3 3 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 9 seconds - unit/client-eviction 6 seconds - unit/cluster/human-announced-nodename 8 seconds - unit/cluster/hostnames 20 seconds - unit/obuf-limits 17 seconds - unit/cluster/cli 63 seconds - unit/aofrw 16 seconds - unit/cluster/links 14 seconds - unit/cluster/failure-marking 47 seconds - integration/psync2 33 seconds - unit/wait 47 seconds - unit/geo 61 seconds - unit/hyperloglog 85 seconds - unit/maxmemory 163 seconds - integration/replication-psync 218 seconds - integration/replication 1 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 0 seconds - defrag 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' >>> redis: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' Hint: It's a good idea to run 'make test' ;) INSTALL redis-server INSTALL redis-benchmark INSTALL redis-cli make[1]: Leaving directory '/home/buildozer/aports/community/redis/src/redis-7.2.5/src' >>> redis-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redis/pkg/redis-openrc/etc/init.d' >>> redis-openrc*: Preparing subpackage redis-openrc... >>> redis-openrc*: Running postcheck for redis-openrc >>> redis*: Running postcheck for redis >>> redis*: Preparing package redis... >>> redis*: Stripping binaries >>> redis*: Script found. /bin/sh added as a dependency for redis-7.2.5-r2.apk >>> redis*: Adding .pre-install >>> redis*: Adding .post-install libfakeroot internal error: payload not recognized! >>> redis-openrc*: Scanning shared objects >>> redis*: Scanning shared objects >>> redis-openrc*: Tracing dependencies... >>> redis-openrc*: Package size: 1.7 KB >>> redis-openrc*: Compressing data... >>> redis-openrc*: Create checksum... >>> redis-openrc*: Create redis-openrc-7.2.5-r2.apk >>> redis*: Tracing dependencies... /bin/sh so:libc.musl-loongarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redis*: Package size: 4.4 MB >>> redis*: Compressing data... >>> redis*: Create checksum... >>> redis*: Create redis-7.2.5-r2.apk >>> redis: Build complete at Thu, 17 Oct 2024 23:41:24 +0000 elapsed time 0h 4m 16s >>> redis: Cleaning up srcdir >>> redis: Cleaning up pkgdir >>> redis: Uninstalling dependencies... (1/8) Purging .makedepends-redis (20241017.233711) (2/8) Purging linux-headers (6.6-r1) (3/8) Purging openssl-dev (3.3.2-r2) (4/8) Purging tcl (8.6.15-r0) (5/8) Purging tzdata (2024b-r1) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libproc2 (4.0.4-r2) (8/8) Purging libintl (0.22.5-r0) Executing busybox-1.36.1-r32.trigger OK: 243 MiB in 100 packages >>> redis: Updating the community/loongarch64 repository index... >>> redis: Signing the index...