>>> valkey: Building main/valkey 7.2.9-r1 (using abuild 3.14.1-r4) started Thu, 29 May 2025 21:53:10 +0000 >>> valkey: Validating /home/buildozer/aports/main/valkey/APKBUILD... >>> valkey: Analyzing dependencies... >>> valkey: Installing for build: build-base linux-headers openssl-dev tcl procps (1/8) Installing linux-headers (6.6-r1) (2/8) Installing openssl-dev (3.3.3-r0) (3/8) Installing tzdata (2025b-r0) (4/8) Installing tcl (8.6.15-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-valkey (20250529.215311) Executing busybox-1.37.0-r12.trigger OK: 348 MiB in 106 packages >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Cleaning up tmpdir >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/valkey-7.2.9.tar.gz >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/valkey-7.2.9.tar.gz >>> valkey: Checking sha512sums... valkey-7.2.9.tar.gz: OK valkey.conf.patch: OK sentinel.conf.patch: OK valkey.initd: OK valkey.confd: OK valkey-sentinel.initd: OK valkey-sentinel.confd: OK CVE-2025-27151.patch: OK >>> valkey: Unpacking /var/cache/distfiles/v3.21/valkey-7.2.9.tar.gz... >>> valkey: valkey.conf.patch patching file valkey.conf >>> valkey: sentinel.conf.patch patching file sentinel.conf >>> valkey: CVE-2025-27151.patch patching file src/valkey-check-aof.c Hunk #1 succeeded at 547 (offset -9 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' CC Makefile.dep rm -rf valkey-server valkey-sentinel valkey-cli valkey-benchmark valkey-check-rdb valkey-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d valkey-check-rdb.d valkey-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d valkey-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d valkey-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo SERVER_CFLAGS=-flto=auto >> .make-settings echo SERVER_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis MAKE linenoise cd hiredis && make static USE_SSL=1 cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hiredis' cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/lua/src' make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/fpconv' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/linenoise' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC valkey-check-rdb.o CC valkey-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC valkey-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC valkey-benchmark.o LINK valkey-benchmark LINK valkey-cli LINK valkey-server INSTALL valkey-sentinel INSTALL valkey-check-rdb INSTALL valkey-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 44640 Testing unit/printver [ready]: 44638 Testing unit/dump [ready]: 44641 Testing unit/auth [ready]: 44639 Testing unit/protocol [ready]: 44645 Testing unit/keyspace [ready]: 44642 Testing unit/scan [ready]: 44644 Testing unit/info [ready]: 44643 Testing unit/info-command [ready]: 44647 Testing unit/type/string [ready]: 44648 Testing unit/type/incr [ready]: 44646 Testing unit/type/list [ready]: 44649 Testing unit/type/list-2 [ready]: 44650 Testing unit/type/list-3 [ready]: 44651 Testing unit/type/set [ready]: 44653 Testing unit/type/zset [ready]: 44652 Testing unit/type/hash Testing Redis version 7.2.4 (00000000) [ok]: AUTH fails if there is no password configured server side (1 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (4 ms) [ok]: Arity check for auth command (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (3 ms) [ok]: DEL against a single item (3 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (2 ms) [ok]: Vararg DEL (2 ms) [ok]: INCR against non existing key (2 ms) [ok]: RESTORE can set an absolute expire (2 ms) [ok]: Untagged multi-key commands (1 ms) [ok]: SET and GET an item (2 ms) [ok]: INCR against key created by incr itself (1 ms) [ok]: info command with at most one sub command (6 ms) [ok]: DECR against key created by incr (1 ms) [ok]: SET and GET an empty item (1 ms) [ok]: RESTORE with ABSTTL in the past (2 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: KEYS with pattern (2 ms) [ok]: info command with one sub-section (2 ms) [ok]: KEYS to get all keys (1 ms) [ok]: INCR against key originally set with SET (1 ms) [ok]: Explicit regression for a list bug (3 ms) [ok]: DBSIZE (1 ms) [ok]: INCR over 32bit value (1 ms) [ok]: RESTORE can set LRU (3 ms) [ok]: INCRBY over 32bit value with over 32bit increment (1 ms) [ok]: info command with multiple sub-sections (4 ms) [ok]: INCR fails against key with spaces (left) (1 ms) [ok]: DEL all keys (3 ms) [ok]: INCR fails against key with spaces (right) (1 ms) [ok]: RESTORE can set LFU (3 ms) [ok]: INCR fails against key with spaces (both) (1 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: HSET/HLEN - Small hash creation (4 ms) [ok]: DECRBY negation overflow (1 ms) [ok]: reg node check compression with insert and pop (7 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (6 ms) [ok]: Is the small hash encoded with a listpack? (1 ms) [ok]: INCR fails against a key holding a list (2 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (2 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: reg node check compression combined with trim (2 ms) [ok]: DECRBY against key is not exist (1 ms) [ok]: Check encoding - listpack (1 ms) [ok]: reg node check compression with lset (2 ms) [ok]: INCR uses shared objects in the 0-9999 range (3 ms) [ok]: ZSET basic ZADD and score update - listpack (2 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: INCR can modify objects in-place (2 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (1 ms) [ok]: INCRBYFLOAT against non existing key (2 ms) [ok]: ZADD XX option without key - listpack (1 ms) [1/91 done]: unit/printver (0 seconds) Testing unit/type/stream [ok]: INCRBYFLOAT against key originally set with SET (1 ms) [ok]: plain node check compression (7 ms) [ok]: INCRBYFLOAT over 32bit value (1 ms) [ok]: ZADD XX existing key - listpack (1 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (1 ms) [ok]: plain node check compression with ltrim (3 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (1 ms) [ok]: ZADD XX updates existing elements score - listpack (2 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (1 ms) [ok]: plain node check compression using lset (3 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (2 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (1 ms) [ok]: INCRBYFLOAT decrement (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (2 ms) [ok]: string to double with null terminator (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (2 ms) [ok]: No negative zero (2 ms) [ok]: Handle an empty query (44 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (2 ms) [ok]: incr operation should update encoding from raw to int (3 ms) [ok]: ZADD XX and NX are not compatible - listpack (1 ms) [ok]: ZADD NX with non existing key - listpack (1 ms) [ok]: decr operation should update encoding from raw to int (3 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (2 ms) [ok]: ZADD GT and NX are not compatible - listpack (1 ms) [ok]: HRANDFIELD - listpack (26 ms) [ok]: incrby operation should update encoding from raw to int (2 ms) [ok]: ZADD LT and NX are not compatible - listpack (1 ms) [ok]: ZADD LT and GT are not compatible - listpack (1 ms) [ok]: decrby operation should update encoding from raw to int (2 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (2 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (38 ms) [ok]: ZADD INCR LT/GT with inf - listpack (5 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (5 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (2 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (2 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (2 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (1 ms) [ok]: SMISMEMBER requires one or more members (2 ms) [ok]: SADD against non set (1 ms) [ok]: ZADD - Variadic version base case - listpack (1 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (1 ms) [ok]: SADD a non-integer against a small intset (2 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (1 ms) [ok]: ZCARD basics - listpack (1 ms) [ok]: ZREM removes key after last element is removed - listpack (3 ms) [ok]: ZREM variadic version - listpack (2 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (1 ms) [ok]: HRANDFIELD - hashtable (25 ms) [ok]: HRANDFIELD with RESP3 (3 ms) [ok]: HRANDFIELD count of 0 is handled correctly (1 ms) [ok]: ZRANGE basics - listpack (7 ms) [ok]: Negative multibulk length (43 ms) [ok]: HRANDFIELD count overflow (2 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (1 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: Out of range multibulk length (3 ms) [ok]: Wrong multibulk payload header (3 ms) [ok]: ZREVRANGE basics - listpack (6 ms) [ok]: Negative multibulk payload length (2 ms) [ok]: Out of range multibulk payload length (2 ms) [ok]: ZRANK/ZREVRANK basics - listpack (7 ms) [ok]: Non-number multibulk payload length (2 ms) [ok]: SADD a non-integer against a large intset (31 ms) [ok]: ZRANK - after deletion - listpack (1 ms) [ok]: SADD an integer larger than 64 bits (1 ms) [ok]: Multi bulk request not followed by bulk arguments (2 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: Generic wrong number of args (2 ms) [ok]: ZINCRBY - increment and decrement - listpack (3 ms) [ok]: ZINCRBY return value - listpack (1 ms) [ok]: Unbalanced number of quotes (3 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (92 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (15 ms) [2/91 done]: unit/info-command (1 seconds) Testing unit/type/stream-cgroups [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (3 ms) [3/91 done]: unit/type/incr (1 seconds) Testing unit/sort [ok]: ZRANGEBYSCORE with LIMIT - listpack (6 ms) [ok]: SADD an integer larger than 64 bits to a large intset (31 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (4 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: latencystats: disable/enable (9 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (10 ms) [ok]: Regression for quicklist #3343 bug (142 ms) [ok]: ZLEXCOUNT advanced - listpack (8 ms) [ok]: latencystats: configure percentiles (14 ms) [ok]: AUTH fails when a wrong password is given (1 ms) [ok]: Arbitrary command gives an error when AUTH is required (1 ms) [ok]: Very big payload in GET/SET (125 ms) [ok]: AUTH succeeds when the right password is given (1 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (8 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (3 ms) [ok]: XADD wrong number of args (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (2 ms) [ok]: latencystats: bad configure percentiles (9 ms) [ok]: For unauthenticated clients output buffer is limited (3 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (3 ms) [ok]: XADD IDs are incremental (2 ms) [ok]: For once authenticated clients output buffer is NOT limited (3 ms) [ok]: XADD IDs are incremental when ms is the same as well (3 ms) [ok]: XADD IDs correctly report an error when overflowing (2 ms) [ok]: latencystats: blocking commands (11 ms) [ok]: XADD auto-generated sequence is incremented for last ID (2 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (1 ms) [ok]: XADD 0-* should succeed (1 ms) [ok]: latencystats: subcommands (6 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (32 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: Check compression with recompress (54 ms) [ok]: ZREMRANGEBYRANK basics - listpack (18 ms) [ok]: Protocol desync regression test #1 (129 ms) [ok]: latencystats: measure latency (57 ms) [ok]: errorstats: failed call authentication error (8 ms) [ok]: SCAN basic (253 ms) [ok]: ZREMRANGEBYLEX basics - listpack (40 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (2 ms) [ok]: errorstats: failed call within MULTI/EXEC (12 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (2 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (132 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (3 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (7 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (1 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (1 ms) [ok]: ZUNIONSTORE basics - listpack (3 ms) [ok]: errorstats: failed call within LUA (10 ms) [ok]: XREADGROUP will return only new elements (3 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (4 ms) [ok]: Listpack: SORT BY key (1 ms) [ok]: ZUNIONSTORE with weights - listpack (1 ms) [ok]: Listpack: SORT BY key with limit (1 ms) [ok]: XREADGROUP can read the history of the elements we own (5 ms) [ok]: Listpack: SORT BY hash field (1 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: XPENDING is able to return pending items (2 ms) [ok]: errorstats: failed call NOSCRIPT error (9 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (2 ms) [ok]: XPENDING can return single consumer items (1 ms) [ok]: Test LPUSH and LPOP on plain nodes (31 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (2 ms) [ok]: XPENDING only group (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: Test LINDEX and LINSERT on plain nodes (3 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (2 ms) [ok]: errorstats: failed call NOGROUP error (7 ms) [ok]: Test LTRIM on plain nodes (2 ms) [ok]: ZINTERSTORE basics - listpack (1 ms) [ok]: ZINTER basics - listpack (1 ms) [ok]: ZINTERCARD with illegal arguments (2 ms) [ok]: Test LREM on plain nodes (3 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: errorstats: rejected call unknown command (6 ms) [ok]: Test LPOS on plain nodes (3 ms) [ok]: ZINTER RESP3 - listpack (3 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (33 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (1 ms) [ok]: Test LMOVE on plain nodes (5 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (3 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: XPENDING with IDLE (23 ms) [ok]: errorstats: rejected call within MULTI/EXEC (12 ms) [ok]: XPENDING with exclusive range intervals works as expected (2 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (6 ms) [ok]: XACK is able to remove items from the consumer/group PEL (3 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (2 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: errorstats: rejected call due to wrong arity (6 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (6 ms) [ok]: XACK should fail if got at least one invalid ID (4 ms) [ok]: ZINTERSTORE with NaN weights - listpack (1 ms) [ok]: ZDIFFSTORE basics - listpack (1 ms) [ok]: ZDIFF basics - listpack (1 ms) [ok]: errorstats: rejected call by OOM error (8 ms) [ok]: ZDIFFSTORE with a regular set - listpack (2 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (6 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: ZDIFF algorithm 1 - listpack (2 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (6 ms) [ok]: errorstats: rejected call by authorization error (8 ms) [ok]: ZDIFF algorithm 2 - listpack (3 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (4 ms) [ok]: errorstats: blocking commands (9 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (48 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (3 ms) [ok]: MIGRATE is caching connections (243 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (20 ms) [ok]: Protocol desync regression test #2 (127 ms) [ok]: Blocking XREADGROUP: key deleted (5 ms) [ok]: Blocking XREADGROUP: key type changed with SET (4 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (5 ms) [ok]: Blocking XREADGROUP: flushed DB (5 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (6 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (6 ms) [ok]: XREAD and XREADGROUP against wrong parameter (2 ms) [ok]: Blocking XREAD: key deleted (5 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (52 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (3 ms) [ok]: Blocking XREAD: key type changed with SET (5 ms) [ok]: Variadic SADD (2 ms) [ok]: AUTH fails when binary password is wrong (1 ms) [ok]: AUTH succeeds when binary password is correct (1 ms) [ok]: Test LSET with packed / plain combinations (113 ms) [ok]: Test LSET with packed is split in the middle (7 ms) [ok]: Crash due to wrongly recompress after lrem (223 ms) [ok]: stats: eventloop metrics (116 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (55 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (16 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (50 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (17 ms) [ok]: Protocol desync regression test #3 (133 ms) [ok]: raw protocol response (1 ms) [ok]: raw protocol response - deferred (1 ms) [ok]: raw protocol response - multiline (1 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (7 ms) [ok]: RESP3 attributes (3 ms) [ok]: RESP3 attributes readraw (3 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: test big number parsing (1 ms) [ok]: test bool parsing (2 ms) [ok]: test verbatim str parsing (1 ms) [ok]: SCAN COUNT (280 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (51 ms) [ok]: XADD with MAXLEN option (371 ms) [ok]: Test LSET with packed consist only one item (189 ms) [ok]: Crash due to delete entry from a compress quicklist node (4 ms) [ok]: Crash due to split quicklist node wrongly (2 ms) [ok]: HRANDFIELD with - hashtable (533 ms) [ok]: test large number of args (120 ms) [ok]: test argument rewriting - issue 9598 (3 ms) [ok]: SCAN MATCH (228 ms) [ok]: Set encoding after DEBUG RELOAD (427 ms) [ok]: SREM basics - $type (3 ms) [ok]: LPOS basic usage - quicklist (45 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (3 ms) [ok]: LPOS COUNT option (2 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (2 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: SREM basics - $type (34 ms) [ok]: SREM basics - intset (2 ms) [ok]: Regression for a crash with blocking ops and pipelining (3 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: SINTERCARD with illegal arguments (4 ms) [ok]: SINTERCARD against non-set should throw error (2 ms) [ok]: SINTERCARD against non-existing key (1 ms) [ok]: XADD with MAXLEN option and the '=' argument (336 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (105 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: RPOP/LPOP with the optional count argument - quicklist (45 ms) [ok]: LPOS basic usage - listpack (1 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (2 ms) [ok]: LPOS COUNT option (2 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (2 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (6 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (2 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (1 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: SINTERSTORE with two sets - regular (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (1 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (2 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (10 ms) [ok]: SUNION with two sets - regular (20 ms) [ok]: SUNIONSTORE with two sets - regular (20 ms) [ok]: SINTER against three sets - regular (1 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (1 ms) [ok]: BLPOP: single existing list - quicklist (49 ms) [ok]: SCAN TYPE (351 ms) [ok]: DEL against expired key (1103 ms) [ok]: SUNION with non existing keys - regular (20 ms) [ok]: EXISTS (1 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (2 ms) [ok]: SDIFFSTORE with three sets - regular (2 ms) [ok]: Commands pipelining (1 ms) [ok]: Non existing command (1 ms) [ok]: RENAME basic usage (2 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (2 ms) [ok]: RENAMENX against already existing key (1 ms) [ok]: RENAMENX against already existing key (2) (1 ms) [ok]: RENAME against non existing source key (1 ms) [ok]: RENAME where source and dest key are the same (existing) (1 ms) [ok]: RENAMENX where source and dest key are the same (existing) (1 ms) [ok]: EXPIRE - set timeouts multiple times (3 ms) [ok]: RENAME where source and dest key are the same (non existing) (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (15 ms) [ok]: RENAME with volatile key, should move the TTL as well (3 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (3 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: HRANDFIELD with - listpack (521 ms) [ok]: DEL all keys again (DB 1) (1 ms) [ok]: COPY basic usage for string (3 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (1 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (3 ms) [ok]: COPY for string does not copy data to no-integer DB (1 ms) [ok]: Quicklist: SORT BY key (29 ms) [ok]: COPY can copy key expire metadata as well (2 ms) [ok]: COPY does not create an expire if it does not exist (2 ms) [ok]: Quicklist: SORT BY key with limit (4 ms) [ok]: Quicklist: SORT BY hash field (32 ms) [ok]: BLPOP: multiple existing lists - quicklist (91 ms) [ok]: XADD with MAXLEN option and the '~' argument (304 ms) [ok]: XADD with NOMKSTREAM option (3 ms) [ok]: COPY basic usage for list - quicklist (49 ms) [ok]: COPY basic usage for list - listpack (3 ms) [ok]: COPY basic usage for $type set (3 ms) [ok]: COPY basic usage for $type set (4 ms) [ok]: BLPOP: second list has an entry - quicklist (46 ms) [ok]: COPY basic usage for $type set (56 ms) [ok]: COPY basic usage for listpack sorted set (3 ms) [ok]: Generated sets must be encoded correctly - intset (1 ms) [ok]: SINTER with two sets - intset (1 ms) [ok]: SINTERCARD with two sets - intset (2 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (49 ms) [ok]: SINTERSTORE with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (9 ms) [ok]: SUNION with two sets - intset (19 ms) [ok]: COPY basic usage for skiplist sorted set (40 ms) [ok]: COPY basic usage for listpack hash (4 ms) [ok]: SUNIONSTORE with two sets - intset (19 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (1 ms) [ok]: SINTERSTORE with three sets - intset (1 ms) [ok]: SCAN unknown type (233 ms) [ok]: SUNION with non existing keys - intset (19 ms) [ok]: SDIFF with two sets - intset (1 ms) [ok]: SDIFF with three sets - intset (1 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: COPY basic usage for hashtable hash (42 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (14 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (92 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (2 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (50 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (77 ms) [ok]: MASTERAUTH test with binary password (924 ms) [ok]: SUNION hashtable and listpack (5 ms) [ok]: SDIFF with first set empty (1 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: BRPOPLPUSH - quicklist (48 ms) [ok]: BLMOVE left left - quicklist (47 ms) [ok]: XADD with MINID option (355 ms) [ok]: XTRIM with MINID option (3 ms) [ok]: HSET/HLEN - Big hash creation (418 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1058 ms) [ok]: XTRIM with MINID option, big delta from master record (3 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (3 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (12 ms) [ok]: BLMOVE left right - quicklist (47 ms) [ok]: RENAME can unblock XREADGROUP with data (6 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (4 ms) [ok]: SCAN with expired keys (252 ms) [ok]: BLMOVE right left - quicklist (47 ms) [5/91 done]: unit/auth (2 seconds) Testing unit/other [ok]: BLMOVE right right - quicklist (47 ms) [ok]: BLPOP: single existing list - listpack (4 ms) [ok]: BLPOP: multiple existing lists - listpack (6 ms) [ok]: BLPOP: second list has an entry - listpack (4 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (5 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (6 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (4 ms) [ok]: BRPOPLPUSH - listpack (4 ms) [ok]: BLMOVE left left - listpack (5 ms) [ok]: BLMOVE left right - listpack (5 ms) [ok]: BLMOVE right left - listpack (5 ms) [ok]: BLMOVE right right - listpack (5 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (7 ms) [ok]: COPY basic usage for stream (372 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (6 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (5 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (5 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (6 ms) [ok]: COPY basic usage for stream-cgroups (24 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (4 ms) [ok]: MOVE basic usage (3 ms) [ok]: Coverage: HELP commands (8 ms) [ok]: MOVE against key existing in the target DB (1 ms) [ok]: BLPOP with variadic LPUSH (3 ms) [ok]: MOVE against non-integer DB (#1428) (1 ms) [ok]: Coverage: MEMORY MALLOC-STATS (2 ms) [ok]: Coverage: MEMORY PURGE (1 ms) [ok]: MOVE can move key expire metadata as well (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (4 ms) [ok]: MOVE does not create an expire if it does not exist (2 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (4 ms) [ok]: SAVE - make sure there are all the types as values (8 ms) [ok]: SET/GET keys in different DBs (3 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (4 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (4 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (4 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (4 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (3 ms) [ok]: RANDOMKEY (26 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (6 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (2 ms) [ok]: Regression for pattern matching long nested loops (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (6 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (6 ms) [ok]: Regression for pattern matching very long nested loops (9 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (6 ms) [ok]: BRPOPLPUSH with wrong source type (3 ms) [ok]: BRPOPLPUSH with wrong destination type (6 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (4 ms) [ok]: BRPOPLPUSH with multiple blocked clients (6 ms) [ok]: SCAN with expired keys with TYPE filter (254 ms) [ok]: HGET against the big hash (292 ms) [ok]: HGET against non existing key (1 ms) [ok]: BLMPOP with multiple blocked clients (12 ms) [ok]: SSCAN with encoding intset (7 ms) [ok]: HSET in update and insert mode (4 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: SSCAN with encoding listpack (5 ms) [ok]: HSETNX target key missing - big hash (1 ms) [ok]: Linked LMOVEs (6 ms) [ok]: HSETNX target key exists - big hash (1 ms) [ok]: HSET/HMSET wrong number of args (1 ms) [ok]: HMSET - small hash (1 ms) [ok]: Circular BRPOPLPUSH (6 ms) [ok]: Self-referential BRPOPLPUSH (3 ms) [ok]: SSCAN with encoding hashtable (13 ms) [ok]: BRPOPLPUSH inside a transaction (3 ms) [ok]: HSCAN with encoding listpack (5 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (6 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (6 ms) [6/91 done]: unit/keyspace (2 seconds) Testing unit/multi [ok]: HMSET - big hash (88 ms) [ok]: HMGET against non existing key and fields (2 ms) [ok]: Hash commands against wrong type (5 ms) [ok]: HMGET - small hash (1 ms) [ok]: HSCAN with encoding hashtable (144 ms) [ok]: ZSCAN with encoding listpack (6 ms) [ok]: HMGET - big hash (88 ms) [ok]: HKEYS - small hash (1 ms) [ok]: MULTI / EXEC basics (4 ms) [ok]: stats: instantaneous metrics (1607 ms) [ok]: DISCARD (2 ms) [ok]: Nested MULTI are not allowed (1 ms) [ok]: MULTI where commands alter argc/argv (2 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (3 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (6 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (2 ms) [ok]: EXEC works on WATCHed key not modified (2 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (2 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (2 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (2 ms) [ok]: HKEYS - big hash (35 ms) [ok]: HVALS - small hash (0 ms) [ok]: HVALS - big hash (5 ms) [ok]: HGETALL - small hash (1 ms) [ok]: stats: debug metrics (123 ms) [ok]: ZSCAN with encoding skiplist (153 ms) [ok]: XCLAIM can claim PEL items from another consumer (612 ms) [ok]: EXEC fail on lazy expired WATCHed key (106 ms) [ok]: WATCH stale keys should not fail EXEC (5 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (6 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (5 ms) [ok]: After successful EXEC key is no longer watched (3 ms) [ok]: After failed EXEC key is no longer watched (3 ms) [ok]: It is possible to UNWATCH (2 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (2 ms) [ok]: FLUSHALL does not touch non affected keys (2 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (2 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (2 ms) [ok]: SWAPDB does not touch watched stale keys (6 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (6 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (6 ms) [ok]: WATCH is able to remember the DB a key belongs to (3 ms) [ok]: WATCH will consider touched keys target of EXPIRE (2 ms) [ok]: SCAN guarantees check under write load (77 ms) [ok]: SSCAN with integer encoded object (issue #1345) (2 ms) [ok]: SSCAN with PATTERN (1 ms) [ok]: HSCAN with PATTERN (1 ms) [ok]: ZSCAN with PATTERN (1 ms) [ok]: HGETALL - big hash (185 ms) [7/91 done]: unit/info (3 seconds) Testing unit/quit [ok]: HDEL and return value (4 ms) [ok]: HDEL - more than a single value (2 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (2 ms) [ok]: HEXISTS (2 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (2 ms) [ok]: HINCRBY against non existing database key (1 ms) [ok]: HINCRBY against non existing hash key (2 ms) [ok]: HINCRBY against hash key created by hincrby itself (2 ms) [ok]: HINCRBY against hash key originally set with HSET (1 ms) [ok]: HINCRBY over 32bit value (1 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (2 ms) [ok]: HINCRBY fails against hash value with spaces (right) (2 ms) [ok]: HINCRBY can detect overflows (2 ms) [ok]: HINCRBYFLOAT against non existing database key (1 ms) [ok]: HINCRBYFLOAT against non existing hash key (3 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (2 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (2 ms) [ok]: HINCRBYFLOAT over 32bit value (2 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (2 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (2 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (1 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (1 ms) [ok]: HSTRLEN against the small hash (3 ms) [ok]: QUIT returns OK (3 ms) [ok]: Pipelined commands after QUIT must not be executed (4 ms) [ok]: ZSCAN scores: regression test for issue #2175 (193 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (4 ms) [8/91 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: XCLAIM without JUSTID increments delivery count (407 ms) [ok]: HSTRLEN against the big hash (275 ms) [ok]: HSTRLEN against non existing field (1 ms) [ok]: HSTRLEN corner cases (8 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (6 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [ok]: Hash fuzzing #1 - 10 fields (106 ms) [ok]: XCLAIM same consumer (205 ms) [ok]: Hash fuzzing #2 - 10 fields (82 ms) [ok]: BRPOPLPUSH timeout (1023 ms) [ok]: SWAPDB awakes blocked client (4 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (203 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2102 ms) [ok]: EXPIRE - write on expire should work (2 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (2 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (1 ms) [ok]: SETEX - Check value (1 ms) [ok]: SETEX - Overwrite old key (1 ms) [ok]: WATCH will consider touched expired keys (1011 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (2 ms) [ok]: DISCARD should UNWATCH all the keys (2 ms) [ok]: FUZZ stresser with data model binary (1568 ms) [ok]: MULTI / EXEC is not propagated (single write command) (92 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (297 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (611 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (102 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (102 ms) [ok]: XAUTOCLAIM as an iterator (208 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (5 ms) [ok]: XCLAIM with trimming (6 ms) [ok]: XAUTOCLAIM with XDEL (5 ms) [ok]: XAUTOCLAIM with XDEL and count (6 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (5 ms) [ok]: XINFO FULL output (14 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (98 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (100 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (101 ms) [ok]: Consumer seen-time and active-time (216 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (7 ms) [ok]: XGROUP CREATECONSUMER: group must exist (2 ms) [ok]: MULTI / EXEC with REPLICAOF (102 ms) [ok]: DISCARD should not fail during OOM (3 ms) [ok]: XREADGROUP with NOACK creates consumer (13 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (123 ms) [ok]: Consumer group read counter and lag in empty streams (6 ms) [ok]: Consumer group read counter and lag sanity (33 ms) [ok]: Consumer group lag with XDELs (29 ms) [ok]: SETEX - Wait for the key to expire (1101 ms) [ok]: SETEX - Wrong time parameter (1 ms) [ok]: PERSIST can undo an EXPIRE (4 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (2 ms) [ok]: Consumer group lag with XTRIM (28 ms) [ok]: Consumer group lag with XADD trimming (27 ms) [ok]: MULTI and script timeout (410 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (4 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (3 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1008 ms) [ok]: BLPOP when new key is moved into place (4 ms) [ok]: BLPOP when result key is created by SORT..STORE (4 ms) [ok]: BLMPOP_LEFT when new key is moved into place (4 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (4 ms) [ok]: BLPOP: timeout value out of range (1 ms) [ok]: BLPOP: with single empty list argument (3 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: BLPOP: with non-integer timeout (2 ms) [ok]: BLPOP: with zero timeout should block indefinitely (3 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (24 ms) [ok]: BLPOP: second argument is not a list (3 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (116 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (114 ms) [ok]: EXEC and script timeout (410 ms) [ok]: FUZZ stresser with data model alpha (1698 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (119 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (16 ms) [ok]: MULTI-EXEC body and script timeout (409 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (124 ms) [ok]: EXPIRE precision is now the millisecond (1105 ms) [ok]: BLPOP: timeout (1043 ms) [ok]: BLPOP: arguments are empty (6 ms) [ok]: BRPOP: with single empty list argument (4 ms) [ok]: BRPOP: with negative timeout (2 ms) [ok]: BRPOP: with non-integer timeout (3 ms) [ok]: BRPOP: with zero timeout should block indefinitely (3 ms) [ok]: PSETEX can set sub-second expires (104 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (25 ms) [ok]: BRPOP: second argument is not a list (3 ms) [ok]: just EXEC and script timeout (407 ms) [ok]: exec with write commands and state change (4 ms) [ok]: exec with read commands and stale replica state change (33 ms) [ok]: EXEC with only read commands should not be rejected when OOM (3 ms) [ok]: PEXPIRE can set sub-second expires (103 ms) [ok]: EXEC with at least one use-memory command should fail (4 ms) [ok]: Blocking commands ignores the timeout (4 ms) [9/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/acl [ok]: MULTI propagation of PUBLISH (52 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: Connections start with the default user (1 ms) [ok]: It is possible to create new users (1 ms) [ok]: Coverage: ACL USERS (1 ms) [ok]: Usernames can not contain spaces or null characters (1 ms) [ok]: New users start disabled (1 ms) [ok]: Enabling the user allows the login (1 ms) [ok]: Only the set of correct passwords work (1 ms) [ok]: It is possible to remove passwords from the set of valid ones (1 ms) [ok]: Test password hashes can be added (1 ms) [ok]: Test password hashes validate input (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (2 ms) [ok]: Test hashed passwords removal (2 ms) [ok]: By default users are not able to access any command (1 ms) [ok]: By default users are not able to access any key (1 ms) [ok]: It's possible to allow the access of a subset of keys (2 ms) [ok]: By default, only default user is able to publish to any channel (2 ms) [ok]: By default, only default user is not able to publish to any shard channel (2 ms) [ok]: By default, only default user is able to subscribe to any channel (3 ms) [ok]: By default, only default user is able to subscribe to any shard channel (3 ms) [ok]: PEXPIREAT can set sub-second expires (204 ms) [ok]: TTL returns time to live in seconds (2 ms) [ok]: By default, only default user is able to subscribe to any pattern (4 ms) [ok]: PTTL returns time to live in milliseconds (2 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (2 ms) [ok]: It's possible to allow publishing to a subset of shard channels (2 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (2 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (4 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (1 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (2 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (5 ms) [ok]: It's possible to allow subscribing to a subset of channels (3 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (2 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (3 ms) [ok]: Subscribers are killed when revoked of channel permission (5 ms) [ok]: Subscribers are killed when revoked of channel permission (5 ms) [ok]: Subscribers are killed when revoked of pattern permission (5 ms) [ok]: Subscribers are killed when revoked of allchannels permission (4 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (5 ms) [ok]: MULTI propagation of EVAL (101 ms) [ok]: blocked command gets rejected when reprocessed after permission change (10 ms) [ok]: Users can be configured to authenticate with any password (1 ms) [ok]: ACLs can exclude single commands (2 ms) [ok]: ACLs can include or exclude whole classes of commands (3 ms) [ok]: ACLs can include single subcommands (4 ms) [ok]: ACLs can exclude single subcommands, case 1 (3 ms) [ok]: ACLs can exclude single subcommands, case 2 (3 ms) [ok]: ACLs cannot include a subcommand with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container command with two args (1 ms) [ok]: ACLs including of a type includes also subcommands (3 ms) [ok]: ACLs can block SELECT of all but a specific DB (3 ms) [ok]: ACLs can block all DEBUG subcommands except one (4 ms) [ok]: ACLs set can include subcommands, if already full command exists (6 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (10 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (3 ms) [ok]: ACL GETUSER is able to translate back command permissions (5 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: ACL GETUSER provides reasonable results (69 ms) [ok]: ACL GETUSER provides correct results (18 ms) [ok]: ACL CAT with illegal arguments (1 ms) [ok]: ACL CAT without category - list all categories (1 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (4 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (2 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (2 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (15 ms) [ok]: ACL LOG shows failed command executions at toplevel (3 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (3 ms) [ok]: ACL LOG is able to test similar events (3 ms) [ok]: ACL LOG is able to log keys access violations and key name (2 ms) [ok]: ACL LOG is able to log channel access violations and channel name (4 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (1 ms) [ok]: MULTI propagation of XREADGROUP (105 ms) [ok]: ACL LOG can distinguish the transaction context (1) (4 ms) [ok]: MULTI with SAVE (3 ms) [ok]: MULTI with SHUTDOWN (3 ms) [ok]: ACL LOG can distinguish the transaction context (2) (6 ms) [ok]: ACL can log errors in the context of Lua scripting (3 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (6 ms) [ok]: ACL LOG can log failed auth attempts (3 ms) [ok]: ACL LOG entries are limited to a maximum amount (8 ms) [ok]: When default user is off, new connections are not authenticated (2 ms) [ok]: When default user has no command permission, hello command still works for other users (2 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (3 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (2 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (1 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (1 ms) [ok]: Delete a user that the client is using (2 ms) [ok]: ACL GENPASS command failed test (2 ms) [ok]: Default user can not be removed (1 ms) [ok]: ACL load non-existing configured ACL file (1 ms) [ok]: ACL-Metrics user AUTH failure (16 ms) [ok]: ACL-Metrics invalid command accesses (12 ms) [ok]: ACL-Metrics invalid key accesses (13 ms) [ok]: ACL-Metrics invalid channels accesses (13 ms) [ok]: MULTI with BGREWRITEAOF (215 ms) [ok]: Very big payload random access (6252 ms) [ok]: Redis should actively expire keys incrementally (609 ms) [ok]: default: load from include file, can access any channels (3 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (3 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (3 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (2 ms) [ok]: ACL load and save (9 ms) [ok]: ACL load and save with restricted channels (9 ms) [ok]: MULTI with config set appendonly (219 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (2 ms) [ok]: BRPOP: timeout (1054 ms) [ok]: BRPOP: arguments are empty (9 ms) [ok]: BLMPOP_LEFT: with single empty list argument (5 ms) [ok]: BLMPOP_LEFT: with negative timeout (2 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (3 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (3 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (25 ms) [ok]: BLMPOP_LEFT: second argument is not a list (3 ms) [ok]: FUZZ stresser with data model compr (1653 ms) [ok]: Default user has access to all channels irrespective of flag (2 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (4 ms) [ok]: Single channel is valid (2 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: MULTI with FLUSHALL and AOF (6 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (4 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (5 ms) [10/91 done]: unit/multi (5 seconds) Testing unit/acl-v2 [ok]: Only default user has access to all channels irrespective of flag (3 ms) [ok]: BGSAVE (67 ms) [ok]: SELECT an out of range DB (1 ms) [ok]: Test basic multiple selectors (5 ms) [ok]: Test ACL selectors by default have no permissions (2 ms) [ok]: Test deleting selectors (3 ms) [ok]: Test selector syntax error reports the error in the selector context (3 ms) [ok]: Test flexible selector definition (8 ms) [ok]: Test separate read permission (4 ms) [ok]: Test separate write permission (4 ms) [ok]: Test separate read and write permissions (4 ms) [ok]: Validate read and write permissions format - empty permission (1 ms) [ok]: Validate read and write permissions format - empty selector (1 ms) [ok]: Validate read and write permissions format - empty pattern (1 ms) [ok]: Validate read and write permissions format - no pattern (1 ms) [ok]: Test separate read and write permissions on different selectors are not additive (7 ms) [ok]: Test SET with separate read permission (5 ms) [ok]: Test SET with separate write permission (6 ms) [ok]: Test SET with read and write permissions (7 ms) [ok]: Test BITFIELD with separate read permission (5 ms) [ok]: Test BITFIELD with separate write permission (5 ms) [ok]: Test BITFIELD with read and write permissions (5 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (8 ms) [ok]: Test ACL GETUSER response information (3 ms) [ok]: Test ACL list idempotency (4 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: Test basic dry run functionality (2 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: Test various odd commands for key permissions (15 ms) [ok]: Existence test commands are not marked as access (3 ms) [ok]: Intersection cardinaltiy commands are access commands (5 ms) [ok]: Test general keyspace commands require some type of permission to execute (6 ms) [ok]: Cardinality commands require some type of permission to execute (10 ms) [ok]: Test sharded channel permissions (3 ms) [ok]: Test sort with ACL permissions (9 ms) [ok]: Test DRYRUN with wrong number of arguments (2 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (1 ms) [ok]: Test behavior of loading ACLs (3 ms) [ok]: Redis should lazy expire keys (1006 ms) [ok]: default: load from config file with all channels permissions (2 ms) [11/91 done]: unit/acl-v2 (1 seconds) Testing unit/latency-monitor [ok]: LATENCY HISTOGRAM with empty histogram (2 ms) [ok]: LATENCY HISTOGRAM all commands (3 ms) [ok]: LATENCY HISTOGRAM sub commands (4 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (5 ms) [ok]: LATENCY HISTOGRAM command (3 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (5 ms) [ok]: BLMPOP_LEFT: timeout (1048 ms) [ok]: BLMPOP_LEFT: arguments are empty (7 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (4 ms) [ok]: BLMPOP_RIGHT: with negative timeout (2 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (3 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (3 ms) [ok]: Test loading an ACL file with duplicate users (10 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (25 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (3 ms) [ok]: Test loading an ACL file with duplicate default user (9 ms) [ok]: Test loading duplicate users in config on startup (39 ms) [ok]: ACL from config file and config rewrite (229 ms) [12/91 done]: unit/acl (3 seconds) Testing integration/block-repl [ok]: Hash fuzzing #1 - 512 fields (5596 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1004 ms) [ok]: 5 keys in, 5 keys out (5 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (1 ms) [ok]: SET with EX with smallest integer should report an error (1 ms) [ok]: GETEX with big integer should report an error (1 ms) [ok]: GETEX with smallest integer should report an error (1 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (3 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EXPIRE with big negative integer (2 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (2 ms) [ok]: BLMPOP_RIGHT: timeout (1052 ms) [ok]: BLMPOP_RIGHT: arguments are empty (6 ms) [ok]: BLPOP inside a transaction (3 ms) [ok]: BLMPOP_LEFT inside a transaction (2 ms) [ok]: BLMPOP propagate as pop with count command to replica (190 ms) [ok]: LPUSHX, RPUSHX - generic (2 ms) [ok]: LPUSHX, RPUSHX - quicklist (45 ms) [ok]: LINSERT - quicklist (51 ms) [ok]: LPUSHX, RPUSHX - listpack (3 ms) [ok]: LINSERT - listpack (6 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (8829 ms) [ok]: LINDEX consistency test - listpack (230 ms) [ok]: Check consistency of different data types after a reload (2427 ms) [ok]: First server should have role slave after SLAVEOF (1004 ms) [ok]: LINDEX random access - listpack (201 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (363 ms) [ok]: Same dataset digest if saving/reloading as AOF? (517 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (68 ms) [ok]: LINDEX consistency test - listpack (494 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2060 ms) [ok]: LINDEX random access - listpack (317 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (88 ms) [ok]: First server should have role slave after REPLICAOF (4 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (25 ms) [ok]: Test latency events logging (3404 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (1 ms) [ok]: LATENCY GRAPH can output the event graph (3 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (281 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (616 ms) [ok]: SET command will remove expire (2 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (2 ms) [ok]: LINDEX consistency test - quicklist (239 ms) [ok]: LINDEX random access - quicklist (149 ms) [ok]: Hash fuzzing #2 - 512 fields (3478 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (340 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2130 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (5757 ms) [ok]: DBSIZE should be 10000 now (1 ms) [ok]: SETNX target key missing (2 ms) [ok]: SETNX target key exists (1 ms) [ok]: SETNX against not-expired volatile key (1 ms) [ok]: LINDEX consistency test - quicklist (496 ms) [ok]: LINDEX random access - quicklist (314 ms) [ok]: XADD mass insertion and XLEN (11626 ms) [ok]: XADD with ID 0-0 (3 ms) [ok]: XADD with LIMIT delete entries no more than limit (3 ms) [ok]: XRANGE COUNT works as expected (2 ms) [ok]: XREVRANGE COUNT works as expected (3 ms) [ok]: ZDIFF fuzzing - listpack (13040 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (3 ms) [ok]: ZPOPMIN with negative count (4 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (2 ms) [ok]: ZPOPMAX with negative count (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (8 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (4 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (6 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (3 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (9 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (8 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (7 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (4 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2011 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (5 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (4 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (4 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (3 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (4 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (7 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (20 ms) [ok]: EXPIRE with NX option on a key with ttl (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (7 ms) [ok]: EXPIRE with NX option on a key without ttl (2 ms) [ok]: EXPIRE with XX option on a key with ttl (2 ms) [ok]: EXPIRE with XX option on a key without ttl (1 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (3 ms) [ok]: EXPIRE with GT option on a key without ttl (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (1 ms) [ok]: EXPIRE with LT option on a key with lower ttl (1 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: EXPIRE with LT option on a key without ttl (2 ms) [ok]: ZADD XX existing key - skiplist (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (2 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (1 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (3 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (1 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (3 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with negative expiry (2 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (3 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (2 ms) [ok]: EXPIRE with non-existed key (2 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (2 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (2 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (3 ms) [ok]: ZADD GT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and GT are not compatible - skiplist (1 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (2 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (5 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (1 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (2 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (1 ms) [ok]: ZADD - Variadic version base case - skiplist (1 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (1 ms) [ok]: ZCARD basics - skiplist (2 ms) [ok]: ZREM removes key after last element is removed - skiplist (3 ms) [ok]: ZREM variadic version - skiplist (2 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (1 ms) [ok]: ZRANGE basics - skiplist (7 ms) [ok]: ZREVRANGE basics - skiplist (6 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (6 ms) [ok]: Redis should not propagate the read command on lazy expire (68 ms) [ok]: ZRANK - after deletion - skiplist (2 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (1 ms) [ok]: ZINCRBY - increment and decrement - skiplist (3 ms) [ok]: ZINCRBY return value - skiplist (1 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (16 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (4 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (5 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (4 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (2 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (10 ms) [ok]: ZLEXCOUNT advanced - skiplist (6 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (6 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (2 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (36 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (2 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (752 ms) [ok]: LLEN against non-list value error (2 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (1 ms) [ok]: LINDEX against non existing key (1 ms) [ok]: LPUSH against non-list value error (1 ms) [ok]: RPUSH against non-list value error (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (18 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (41 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (2 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (2 ms) [ok]: ZUNIONSTORE with empty set - skiplist (2 ms) [ok]: RPOPLPUSH base case - quicklist (56 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (2 ms) [ok]: ZUNIONSTORE basics - skiplist (3 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (5 ms) [ok]: ZUNIONSTORE with weights - skiplist (1 ms) [ok]: ZUNION with weights - skiplist (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (2 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (2 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (1 ms) [ok]: ZINTERSTORE basics - skiplist (1 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (2 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: ZINTERCARD basics - skiplist (2 ms) [ok]: ZINTER RESP3 - skiplist (2 ms) [ok]: ZINTERSTORE with weights - skiplist (1 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (2 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (5 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (2 ms) [ok]: LMOVE left left base case - quicklist (52 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (6 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (2 ms) [ok]: ZDIFFSTORE basics - skiplist (1 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (2 ms) [ok]: ZDIFF subtracting set from itself - skiplist (1 ms) [ok]: ZDIFF algorithm 1 - skiplist (3 ms) [ok]: ZDIFF algorithm 2 - skiplist (3 ms) [ok]: LMOVE left right base case - quicklist (50 ms) [13/91 done]: unit/expire (13 seconds) Testing integration/replication [ok]: LMOVE right left base case - quicklist (47 ms) [ok]: LMOVE right right base case - quicklist (47 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (48 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (47 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (47 ms) [ok]: Slave enters handshake (1 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (48 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (95 ms) [ok]: XRANGE can be used to iterate the whole stream (1131 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (93 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (92 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (98 ms) [ok]: Big Quicklist: SORT BY key (3701 ms) [ok]: Big Quicklist: SORT BY key with limit (38 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (92 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (49 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (51 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (52 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (51 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (50 ms) [ok]: RPOPLPUSH base case - listpack (6 ms) [ok]: LMOVE left left base case - listpack (6 ms) [ok]: LMOVE left right base case - listpack (6 ms) [ok]: LMOVE right left base case - listpack (6 ms) [ok]: LMOVE right right base case - listpack (6 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (4 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (4 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (4 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (5 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (4 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (47 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (50 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (48 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (51 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (48 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (6 ms) [ok]: LMOVE left left with listpack source and existing target listpack (5 ms) [ok]: LMOVE left right with listpack source and existing target listpack (6 ms) [ok]: LMOVE right left with listpack source and existing target listpack (6 ms) [ok]: LMOVE right right with listpack source and existing target listpack (6 ms) [ok]: RPOPLPUSH against non existing key (3 ms) [ok]: RPOPLPUSH against non list src key (4 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (46 ms) [ok]: RPOPLPUSH against non list dst key - listpack (5 ms) [ok]: SDIFF fuzzing (13842 ms) [ok]: RPOPLPUSH against non existing src key (1 ms) [ok]: SDIFF against non-set should throw error (4 ms) [ok]: SDIFF should handle non existing key as empty (2 ms) [ok]: SDIFFSTORE against non-set should throw error (6 ms) [ok]: SDIFFSTORE should handle non existing key as empty (4 ms) [ok]: SINTER against non-set should throw error (2 ms) [ok]: SINTER should handle non existing key as empty (1 ms) [ok]: SINTER with same integer elements but different encoding (3 ms) [ok]: SINTERSTORE against non-set should throw error (5 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (3 ms) [ok]: SUNION against non-set should throw error (3 ms) [ok]: MIGRATE cached connections are released after some time (15003 ms) [ok]: SUNION should handle non existing key as empty (2 ms) [ok]: SUNIONSTORE against non-set should throw error (6 ms) [ok]: SUNIONSTORE should handle non existing key as empty (6 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (1 ms) [ok]: SPOP basics - listpack (3 ms) [ok]: SPOP with =1 - listpack (4 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (93 ms) [ok]: SRANDMEMBER - listpack (32 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (6 ms) [ok]: SPOP basics - intset (3 ms) [ok]: LPOP/RPOP/LMPOP against empty list (4 ms) [ok]: SPOP with =1 - intset (3 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (7 ms) [ok]: SRANDMEMBER - intset (33 ms) [ok]: SPOP integer from listpack set (5 ms) [ok]: SPOP with - listpack (13 ms) [ok]: SPOP with - intset (10 ms) [ok]: SPOP with - hashtable (10 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (10 ms) [ok]: SPOP using integers with Knuth's algorithm (1 ms) [ok]: SPOP new implementation: code path #1 intset (8 ms) [ok]: SPOP new implementation: code path #2 intset (8 ms) [ok]: SPOP new implementation: code path #3 intset (7 ms) [ok]: SPOP new implementation: code path #1 listpack (7 ms) [ok]: SPOP new implementation: code path #2 listpack (8 ms) [ok]: SPOP new implementation: code path #3 listpack (8 ms) [ok]: MIGRATE is able to migrate a key between two instances (256 ms) [ok]: Mass RPOP/LPOP - listpack (212 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (121 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (1 ms) [ok]: SRANDMEMBER with against non existing key (1 ms) [ok]: SRANDMEMBER count overflow (1 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (3531 ms) [ok]: APPEND basics (7 ms) [ok]: APPEND basics, integer encoded values (3 ms) [ok]: SRANDMEMBER with - listpack (72 ms) [ok]: SRANDMEMBER with - intset (61 ms) [ok]: MIGRATE is able to copy a key between two instances (257 ms) [ok]: SRANDMEMBER with - hashtable (61 ms) [ok]: Mass RPOP/LPOP - listpack (362 ms) [ok]: LMPOP with illegal argument (7 ms) [ok]: SRANDMEMBER histogram distribution - listpack (251 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (261 ms) [ok]: LMPOP single existing list - quicklist (145 ms) [ok]: LMPOP multiple existing lists - quicklist (187 ms) [ok]: LMPOP single existing list - listpack (11 ms) [ok]: LMPOP multiple existing lists - listpack (12 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (4435 ms) [ok]: SRANDMEMBER histogram distribution - intset (250 ms) [ok]: MIGRATE propagates TTL correctly (254 ms) [ok]: LMPOP propagate as pop with count command to replica (119 ms) [ok]: Hash ziplist of various encodings (114 ms) [ok]: Hash ziplist of various encodings - sanitize dump (12 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (2 ms) [ok]: LRANGE basics - quicklist (49 ms) [ok]: LRANGE inverted indexes - quicklist (52 ms) [14/91 done]: unit/type/hash (17 seconds) Testing integration/replication-2 [ok]: LRANGE out of range indexes including the full list - quicklist (49 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (274 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (13854 ms) [ok]: LRANGE out of range negative end index - quicklist (44 ms) [ok]: LRANGE basics - listpack (6 ms) [ok]: LRANGE inverted indexes - listpack (4 ms) [ok]: LRANGE out of range indexes including the full list - listpack (3 ms) [ok]: LRANGE out of range negative end index - listpack (3 ms) [ok]: LRANGE against non existing key (1 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (2 ms) [ok]: APPEND fuzzing (1013 ms) [ok]: FLUSHDB (212 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (6 ms) [ok]: RESET clears client state (3 ms) [ok]: RESET clears MONITOR state (7 ms) [ok]: RESET clears and discards MULTI state (2 ms) [ok]: RESET clears Pub/Sub state (2 ms) [ok]: First server should have role slave after SLAVEOF (106 ms) [ok]: If min-slaves-to-write is honored, write is accepted (3 ms) [ok]: RESET clears authenticated state (4 ms) [ok]: No write if min-slaves-to-write is < attached slaves (2 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (2 ms) [ok]: Subcommand syntax error crash (issue #10070) (4 ms) [ok]: LTRIM basics - quicklist (600 ms) [ok]: SETNX against expired volatile key (5124 ms) [ok]: GETEX EX option (2 ms) [ok]: GETEX PX option (2 ms) [ok]: GETEX EXAT option (2 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (1 ms) [ok]: GETEX syntax errors (1 ms) [ok]: GETEX and GET expired key or not exist (4 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: LTRIM out of range negative end index - quicklist (95 ms) [ok]: LSET - quicklist (49 ms) [ok]: LSET out of range index - quicklist (1 ms) [ok]: LTRIM basics - listpack (45 ms) [ok]: GETDEL propagate as DEL command to replica (177 ms) [ok]: LTRIM out of range negative end index - listpack (17 ms) [ok]: LSET - listpack (5 ms) [ok]: LSET out of range index - listpack (2 ms) [ok]: LSET against non existing key (3 ms) [ok]: LSET against non list value (3 ms) [ok]: LREM remove all the occurrences - quicklist (51 ms) [ok]: LREM remove the first occurrence - quicklist (2 ms) [ok]: LREM remove non existing element - quicklist (2 ms) [ok]: GETEX without argument does not propagate to replica (99 ms) [ok]: LREM starting from tail with negative count - quicklist (48 ms) [ok]: MGET (34 ms) [ok]: MGET against non existing key (1 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (2 ms) [ok]: MGET against non-string key (2 ms) [ok]: GETSET (set new value) (2 ms) [ok]: GETSET (replace old value) (1 ms) [ok]: MSET base case (3 ms) [ok]: MSET/MSETNX wrong number of args (2 ms) [ok]: MSET with already existing - same key twice (1 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (1 ms) [ok]: MSETNX with not existing keys - same key twice (1 ms) [ok]: MSETNX with already existing keys - same key twice (1 ms) [ok]: STRLEN against non-existing key (1 ms) [ok]: STRLEN against integer-encoded value (1 ms) [ok]: STRLEN against plain string (1 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (2 ms) [ok]: SETBIT against integer-encoded key (3 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (2 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (47 ms) [ok]: LREM remove all the occurrences - listpack (5 ms) [ok]: LREM remove the first occurrence - listpack (1 ms) [ok]: LREM remove non existing element - listpack (1 ms) [ok]: LREM starting from tail with negative count - listpack (4 ms) [ok]: LREM starting from tail with negative count (2) - listpack (1 ms) [ok]: LREM deleting objects that may be int encoded - listpack (3 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (12 ms) [ok]: BLPOP/BLMOVE should increase dirty (14 ms) [ok]: client unblock tests (26 ms) [ok]: client unblock tests (10 ms) [ok]: List listpack -> quicklist encoding conversion (13 ms) [ok]: List listpack -> quicklist encoding conversion (183 ms) [ok]: List quicklist -> listpack encoding conversion (243 ms) [ok]: List encoding conversion when RDB loading (20 ms) [ok]: List invalid list-max-listpack-size config (57 ms) [ok]: Big Quicklist: SORT BY hash field (3718 ms) [ok]: List of various encodings (68 ms) [ok]: List of various encodings - sanitize dump (11 ms) [ok]: Intset: SORT BY key (1 ms) [ok]: Unblock fairness is kept while pipelining (7 ms) [ok]: Intset: SORT BY key with limit (1 ms) [ok]: Intset: SORT BY hash field (1 ms) [ok]: Unblock fairness is kept during nested unblock (10 ms) [ok]: Blocking command accounted only once in commandstats (19 ms) [ok]: Blocking command accounted only once in commandstats after timeout (7 ms) [ok]: Don't rehash if redis has child process (1228 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (99 ms) [15/91 done]: unit/type/list (19 seconds) Testing integration/replication-3 [ok]: Process title set as expected (4 ms) [16/91 done]: unit/other (17 seconds) Testing integration/replication-4 [ok]: First server should have role slave after SLAVEOF (104 ms) [ok]: First server should have role slave after SLAVEOF (4 ms) [ok]: SETBIT fuzzing (1451 ms) [ok]: GETBIT against non-existing key (1 ms) [ok]: GETBIT against string-encoded key (2 ms) [ok]: GETBIT against integer-encoded key (3 ms) [ok]: SETRANGE against non-existing key (3 ms) [ok]: SETRANGE against string-encoded key (3 ms) [ok]: SETRANGE against integer-encoded key (7 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (2 ms) [ok]: GETRANGE against non-existing key (1 ms) [ok]: GETRANGE against wrong key type (1 ms) [ok]: GETRANGE against string value (2 ms) [ok]: GETRANGE against integer-encoded value (2 ms) [ok]: Hash table: SORT BY key (33 ms) [ok]: Hash table: SORT BY key with limit (5 ms) [ok]: Hash table: SORT BY hash field (34 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (9971 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2877 ms) [ok]: min-slaves-to-write is ignored by slaves (5 ms) [ok]: GETRANGE fuzzing (3167 ms) [ok]: Coverage: SUBSTR (3 ms) [ok]: Extended SET can detect syntax errors (1 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (2 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (1 ms) [ok]: Extended SET GET option with XX (2 ms) [ok]: Extended SET GET option with XX and no previous value (2 ms) [ok]: Extended SET GET option with NX (2 ms) [ok]: Extended SET GET option with NX and previous value (2 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (2 ms) [ok]: Extended SET EX option (2 ms) [ok]: Extended SET PX option (2 ms) [ok]: Extended SET EXAT option (2 ms) [ok]: Extended SET PXAT option (2 ms) [ok]: Extended SET using multiple options at once (2 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (1 ms) [ok]: LCS basic (3 ms) [ok]: LCS len (3 ms) [ok]: LCS indexes (3 ms) [ok]: LCS indexes with match len (3 ms) [ok]: LCS indexes with match len and minimum match len (2 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: APPEND modifies the encoding from int to raw (5 ms) [17/91 done]: unit/type/string (23 seconds) Testing integration/replication-psync [ok]: Slave should be able to synchronize with the master (105 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (51 ms) [ok]: Slave is able to detect timeout during handshake (1 ms) [ok]: Test replication with parallel clients writing in different DBs (5184 ms) [ok]: Slave should be able to synchronize with the master (105 ms) [ok]: Set instance A as slave of B (105 ms) [ok]: INCRBYFLOAT replication, should not remove expire (7 ms) [ok]: GETSET replication (8 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (9 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (2 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (2 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (2 ms) [ok]: Detect write load to master (1002 ms) [ok]: LTRIM stress testing - quicklist (25450 ms) [ok]: XREVRANGE returns the reverse of XRANGE (11349 ms) [ok]: XRANGE exclusive ranges (13 ms) [ok]: XREAD with non empty stream (1 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: BRPOPLPUSH replication, list exists (1010 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (6 ms) [ok]: BLMOVE (left, left) replication, list exists (1010 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (7 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2752 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (8452 ms) [ok]: BLMOVE (left, right) replication, list exists (1010 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (7 ms) [ok]: First server should have role slave after SLAVEOF (105 ms) [ok]: LATENCY GRAPH can output the expire event graph (1 ms) [ok]: LATENCY of expire events are correctly collected (17248 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (1 ms) [ok]: LATENCY DOCTOR produces some output (2 ms) [ok]: LATENCY RESET is able to reset events (1 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: ZDIFF fuzzing - skiplist (14616 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (3 ms) [ok]: ZPOPMIN with negative count (2 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (2 ms) [ok]: ZPOPMAX with negative count (2 ms) [18/91 done]: unit/latency-monitor (21 seconds) Testing integration/replication-buffer [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (5 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (4 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (5 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (3 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (5 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (7 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (7 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (5 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (4 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (4 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (4 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (4 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (6 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (6 ms) [ok]: ZPOP/ZMPOP against wrong type (7 ms) [ok]: ZMPOP with illegal argument (6 ms) [ok]: ZMPOP propagate as pop with count command to replica (79 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (4 ms) [ok]: SCAN regression test for issue #4906 (26207 ms) [19/91 done]: unit/scan (29 seconds) Testing integration/shutdown [ok]: Replication of an expired key does not delete the expired key (540 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (187 ms) [ok]: ZMPOP readraw in RESP3 (6 ms) [ok]: BLMOVE (right, left) replication, list exists (1009 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (7 ms) [ok]: BZMPOP readraw in RESP3 (195 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (7 ms) [ok]: First server should have role slave after SLAVEOF (2 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (188 ms) [ok]: ZMPOP readraw in RESP2 (6 ms) [ok]: BZMPOP readraw in RESP2 (195 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (2 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (2 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (4 ms) [ok]: ZUNIONSTORE result is sorted (266 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (2 ms) [ok]: ZMSCORE retrieve (2 ms) [ok]: ZMSCORE retrieve from empty set (1 ms) [ok]: ZMSCORE retrieve with missing member (1 ms) [ok]: ZMSCORE retrieve single member (1 ms) [ok]: ZMSCORE retrieve requires one or more members (1 ms) [ok]: ZSET commands don't accept the empty strings as valid score (1 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (4 ms) [ok]: ZSCORE - listpack (114 ms) [ok]: BLMOVE (right, right) replication, list exists (1009 ms) [ok]: ZMSCORE - listpack (169 ms) [ok]: BLPOP followed by role change, issue #2473 (213 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (166 ms) [ok]: ZSET sorting stresser - listpack (164 ms) [ok]: Second server should have role master at first (2 ms) [ok]: SLAVEOF should start with link status "down" (4 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: Sync should have transferred keys from master (1 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (2 ms) [ok]: FLUSHDB / FLUSHALL should replicate (100 ms) [ok]: ROLE in master reports master with a slave (2 ms) [ok]: ROLE in slave reports slave in connected state (1 ms) [ok]: All replicas share one global replication buffer (265 ms) [ok]: Replication buffer will become smaller when no replica uses (20 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6291 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (3034 ms) [ok]: Slave should be able to synchronize with the master (103 ms) [ok]: MASTER and SLAVE consistency with expire (13761 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (166 ms) [ok]: Detect write load to master (1002 ms) [ok]: XREAD with non empty second stream (7623 ms) [ok]: Blocking XREAD waiting new data (14 ms) [ok]: Blocking XREAD waiting old data (4 ms) [ok]: Blocking XREAD will not reply with an empty array (99 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (105 ms) [ok]: XREAD: XADD + DEL should not awake client (9 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (10 ms) [ok]: XREAD with same stream name multiple times should work (6 ms) [ok]: XREAD + multiple XADD inside transaction (8 ms) [ok]: XDEL basic test (3 ms) [ok]: XDEL multiply id test (6 ms) [ok]: Test replication with blocking lists and sorted sets operations (25011 ms) [ok]: Big Hash table: SORT BY key (4261 ms) [ok]: Big Hash table: SORT BY key with limit (46 ms) [20/91 done]: integration/block-repl (26 seconds) Testing integration/aof [ok]: Shutting down master waits for replica to catch up (shutdown) (3035 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (2 ms) [ok]: Short read: Server should start if load-truncated is yes (2 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (2 ms) [ok]: Append a new command after loading an incomplete AOF (1 ms) [ok]: Short read + command: Server should start (2 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (2 ms) [ok]: Bad format: Server should have logged an error (3 ms) [ok]: Unfinished MULTI: Server should have logged an error (3 ms) [ok]: Short read: Server should have logged an error (3 ms) [ok]: Short read: Utility should confirm the AOF is not valid (105 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (42 ms) [ok]: Short read: Utility should be able to fix the AOF (49 ms) [ok]: Replication backlog size can outgrow the backlog limit config (3390 ms) [ok]: Fixed AOF: Server should have been started (10 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (7 ms) [ok]: AOF+SPOP: Server should have been started (6 ms) [ok]: AOF+SPOP: Set should have 1 member (4 ms) [ok]: AOF+SPOP: Server should have been started (6 ms) [ok]: AOF+SPOP: Set should have 1 member (3 ms) [ok]: AOF+EXPIRE: Server should have been started (5 ms) [ok]: AOF+EXPIRE: List should be empty (2 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (2 ms) [ok]: ziplist implementation: value encoding and backlink (11110 ms) [ok]: Slave is able to evict keys created in writable slaves (6008 ms) [ok]: Shutting down master waits for replica timeout (4235 ms) [ok]: Writable replica doesn't return expired keys (112 ms) [ok]: PFCOUNT updates cache on readonly replica (8 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (111 ms) [ok]: Big Hash table: SORT BY hash field (5265 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (1 ms) [ok]: SORT_RO GET (1 ms) [ok]: SORT GET (key and hash) with sanity check (12 ms) [ok]: SORT BY key STORE (5 ms) [ok]: SORT BY hash field STORE (3 ms) [ok]: SORT extracts STORE correctly (1 ms) [ok]: SORT_RO get keys (1 ms) [ok]: SORT extracts multiple STORE correctly (1 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (2 ms) [ok]: SORT sorted set (3 ms) [ok]: SORT sorted set BY nosort should retain ordering (4 ms) [ok]: SORT sorted set BY nosort + LIMIT (4 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (4 ms) [ok]: SORT sorted set: +inf and -inf handling (3 ms) [21/91 done]: integration/replication-3 (21 seconds) Testing integration/aof-race [ok]: SORT regression for issue #19, sorting floats (47 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (1 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (2 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (2 ms) [ok]: SORT with BY and STORE should still order output (3 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (2 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (2 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (2 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (2 ms) [ok]: SORT by nosort with limit returns based on original list order (2 ms) [ok]: SORT_RO - Successful case (1 ms) [ok]: SORT_RO - Cannot run with STORE arg (1 ms) [ok]: SORT speed, 100 element list BY key, 100 times (92 ms) [ok]: Shutting down master waits for replica then fails (1317 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (136 ms) [ok]: SORT speed, 100 element list directly, 100 times (65 ms) [ok]: SORT speed, 100 element list BY , 100 times (60 ms) [ok]: SETRANGE with huge offset (9 ms) [22/91 done]: unit/sort (40 seconds) Testing integration/aof-multi-part [ok]: Multi Part AOF can't load data when some file missing (138 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (141 ms) [ok]: Shutting down master waits for replica then aborted (559 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7802 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (146 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (144 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (142 ms) [ok]: Shutting down primary wait for replica after previous block (561 ms) [23/91 done]: integration/shutdown (13 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (156 ms) [ok]: Slave should be able to synchronize with the master (104 ms) [ok]: test old version rdb file (2 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (152 ms) [24/91 done]: integration/aof-race (2 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (146 ms) [ok]: RDB encoding loading test (31 ms) [ok]: corrupt payload: #7445 - with sanitize (260 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (163 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (161 ms) [ok]: Server started empty with non-existing RDB file (1 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (260 ms) [ok]: Multi Part AOF can start when no aof and no manifest (179 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: corrupt payload: invalid zlbytes header (259 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (174 ms) [ok]: XDEL fuzz test (8931 ms) [ok]: Detect write load to master (1003 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (173 ms) [ok]: corrupt payload: valid zipped hash header, dup records (251 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (177 ms) [ok]: corrupt payload: quicklist big ziplist prev len (264 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (174 ms) [ok]: Test RDB stream encoding (476 ms) [ok]: Test RDB stream encoding - sanitize dump (22 ms) [ok]: AOF fsync always barrier issue (5698 ms) [ok]: corrupt payload: quicklist small ziplist prev len (254 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (286 ms) [ok]: Server should not start if RDB file can't be open (2 ms) [ok]: GETEX should not append to AOF (4 ms) [ok]: corrupt payload: quicklist ziplist wrong count (250 ms) [ok]: Server should not start if RDB is corrupted (3 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (291 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (13322 ms) [ok]: Unknown command: Server should have logged an error (3 ms) [ok]: corrupt payload: #3080 - quicklist (250 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (173 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (107 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (176 ms) [ok]: corrupt payload: quicklist with empty ziplist (260 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (2 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (160 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (261 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (110 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (811 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (72 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (3 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (260 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (129 ms) [ok]: corrupt payload: #3080 - ziplist (247 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (691 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (132 ms) [ok]: Generate timestamp annotations in AOF (383 ms) [ok]: Successfully load AOF which has timestamp annotations inside (3 ms) [ok]: Test FLUSHALL aborts bgsave (1445 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (263 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (383 ms) [ok]: bgsave resets the change counter (111 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (178 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (259 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (176 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (1143 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: corrupt payload: listpack invalid size header (257 ms) [ok]: Truncate AOF to specific timestamp (678 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (153 ms) [ok]: corrupt payload: listpack too long entry len (161 ms) [ok]: corrupt payload: listpack very long entry len (163 ms) [ok]: AOF enable will create manifest file (463 ms) [ok]: corrupt payload: listpack too long entry prev len (247 ms) [ok]: corrupt payload: stream with duplicate consumers (249 ms) [ok]: corrupt payload: hash ziplist with duplicate records (260 ms) [ok]: corrupt payload: hash listpack with duplicate records (261 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (11206 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (163 ms) Waiting for process 49205 to exit... [ok]: corrupt payload: hash ziplist uneven record count (260 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1489 ms) [ok]: corrupt payload: hash duplicate records (261 ms) [ok]: corrupt payload: hash empty zipmap (254 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (957 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (28239 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (163 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (527 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (157 ms) [25/91 done]: integration/replication-2 (32 seconds) Testing integration/corrupt-dump-fuzzer [ok]: AOF enable/disable auto gc (239 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (258 ms) [ok]: AOF can produce consecutive sequence number after reload (210 ms) [ok]: client freed during loading (3447 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (250 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (428 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (262 ms) [ok]: corrupt payload: fuzzer findings - hash crash (263 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (17860 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (260 ms) [ok]: AOF will trigger limit when AOFRW fails many times (675 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (255 ms) [ok]: Test RDB load info (1092 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (4271 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (8 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (7 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (7 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (7 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (257 ms) [ok]: AOF rewrite during write load: RDB preamble=no (33438 ms) [ok]: corrupt payload: fuzzer findings - empty intset (261 ms) [ok]: Turning off AOF kills the background writing child if any (123 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (257 ms) [ok]: AOF rewrite of list with listpack encoding, string data (119 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (257 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1017 ms) [ok]: BZPOPMIN with same key multiple times should work (8 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (5 ms) [ok]: BZPOPMIN with variadic ZADD (5 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (258 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (498 ms) [ok]: AOF rewrite of list with listpack encoding, int data (116 ms) [ok]: MIGRATE can correctly transfer large values (34919 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (251 ms) [ok]: MIGRATE can correctly transfer hashes (255 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (263 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (522 ms) [ok]: AOF rewrite of set with intset encoding, string data (68 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (263 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9345 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (156 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1006 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (6 ms) [ok]: BZMPOP_MIN with variadic ZADD (4 ms) [ok]: MIGRATE timeout actually works (666 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (260 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2498 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (521 ms) [ok]: MIGRATE can migrate multiple keys at once (253 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (174 ms) [ok]: AOF rewrite of set with intset encoding, int data (120 ms) [ok]: Slave should be able to synchronize with the master (106 ms) [26/91 done]: integration/aof-multi-part (12 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (4312 ms) [ok]: RDB load zipmap hash: converts to listpack (2 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (260 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (259 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (2 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (254 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (261 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (510 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (73 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1007 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (175 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (4 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (11 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (276 ms) [ok]: ZSCORE - skiplist (145 ms) [27/91 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: ZMSCORE - skiplist (140 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (7681 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (273 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (3 ms) [ok]: Detect write load to master (1003 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (268 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (151 ms) [28/91 done]: unit/dump (54 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: EVAL can process writes from AOF in read-only replicas (288 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (277 ms) [ok]: ZSET sorting stresser - skiplist (172 ms) [ok]: Test valkey-check-aof for old style resp AOF (26 ms) [ok]: Test valkey-check-aof for old style resp AOF - has data in the same format as manifest (26 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (4 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1174 ms) [29/91 done]: integration/replication-buffer (25 seconds) Testing integration/logging [ok]: Test valkey-check-aof for old style rdb-preamble AOF (32 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (4 ms) [ok]: Test valkey-check-aof for Multi Part AOF with resp AOF base (33 ms) [ok]: Test valkey-check-aof for Multi Part AOF with rdb-preamble AOF base (50 ms) [30/91 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/psync2 [ok]: AOF rewrite of hash with hashtable encoding, string data (856 ms) [ok]: Test valkey-check-aof for Multi Part AOF contains a format error (46 ms) [ok]: Crash report generated on SIGABRT (18 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in fix mode (66 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (77 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (289 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (32 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (4 ms) [ok]: Crash report generated on DEBUG SEGFAULT (11 ms) [ok]: Test child sending info (4021 ms) [31/91 done]: integration/logging (1 seconds) Testing integration/psync2-reg [ok]: corrupt payload: fuzzer findings - stream with no records (186 ms) [32/91 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2-pingoff [ok]: FLUSHDB / FLUSHALL should persist in AOF (30 ms) [33/91 done]: integration/aof (20 seconds) Testing integration/psync2-master-restart [ok]: script won't load anymore if it's in rdb (1 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (278 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (3 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (2 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (270 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (833 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (75 ms) [ok]: corrupt payload: fuzzer findings - huge string (210 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (273 ms) [ok]: failed bgsave prevents writes (619 ms) [ok]: LTRIM stress testing - listpack (29983 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (193 ms) [34/91 done]: integration/rdb (14 seconds) Testing integration/failover [ok]: PSYNC2 pingoff: setup (1016 ms) [ok]: PSYNC2 pingoff: write and wait replication (5 ms) [35/91 done]: unit/type/list-2 (56 seconds) Testing integration/valkey-cli [ok]: PSYNC2 #3899 regression: setup (1020 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (3 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (274 ms) [ok]: PSYNC2 #3899 regression: kill first replica (3 ms) [ok]: Interactive CLI: INFO response should be printed raw (85 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (175 ms) [ok]: Interactive CLI: Status reply (61 ms) [ok]: failover command fails without connected replica (1 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (1009 ms) [ok]: Interactive CLI: Integer reply (61 ms) [ok]: setup replication for following tests (110 ms) [ok]: failover command fails with invalid host (1 ms) [ok]: failover command fails with invalid port (1 ms) [ok]: failover command fails with just force and timeout (2 ms) [ok]: failover command fails when sent to a replica (1 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: Interactive CLI: Bulk reply (62 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (129 ms) [ok]: Interactive CLI: Multi-bulk reply (63 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (279 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (278 ms) [ok]: Interactive CLI: Parsing quotes (433 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1188 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (4 ms) [ok]: corrupt payload: fuzzer findings - empty zset (297 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (881 ms) [ok]: failover command to specific replica works (938 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (293 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (2 ms) [ok]: AOF rewrite functions (125 ms) [ok]: Interactive CLI: Subscribed mode (621 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (189 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (304 ms) [ok]: BGREWRITEAOF is refused if already in progress (70 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (2 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (269 ms) [36/91 done]: unit/aofrw (55 seconds) Testing integration/valkey-benchmark [ok]: Interactive non-TTY CLI: Subscribed mode (431 ms) [ok]: Non-interactive TTY CLI: Status reply (11 ms) [ok]: Non-interactive TTY CLI: Integer reply (14 ms) [ok]: Non-interactive TTY CLI: Bulk reply (12 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (13 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (30 ms) [ok]: failover command to any replica works (711 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (40 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (274 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (136 ms) [ok]: benchmark: set,get (33 ms) [ok]: Non-interactive non-TTY CLI: Status reply (10 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (9 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (10 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (11 ms) [ok]: benchmark: connecting using URI set,get (47 ms) [ok]: benchmark: connecting using URI with authentication set,get (46 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (184 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (66 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (10 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (23 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (21 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (33 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (24 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (58 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (189 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (15 ms) [ok]: failover to a replica with force works (521 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (58 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9864 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (294 ms) [ok]: benchmark: full test suite (710 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (2 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (285 ms) [ok]: PSYNC2: cluster is consistent after failover (7 ms) [ok]: failover with timeout aborts if replica never catches up (647 ms) [ok]: failovers can be aborted (97 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (286 ms) [ok]: benchmark: multi-thread set,get (555 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (289 ms) [ok]: failover aborts if target rejects sync request (524 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (296 ms) [ok]: benchmark: pipelined full set,get (667 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (289 ms) [37/91 done]: integration/corrupt-dump (18 seconds) Testing integration/dismiss-mem [ok]: benchmark: arbitrary command (39 ms) [ok]: benchmark: keyspace length (147 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (20 ms) [38/91 done]: integration/valkey-benchmark (3 seconds) Testing unit/pubsub [ok]: PSYNC2 #3899 regression: kill first replica (4 ms) [ok]: Pub/Sub PING on RESP2 (8 ms) [ok]: Pub/Sub PING on RESP3 (4 ms) [ok]: PUBLISH/SUBSCRIBE basics (12 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (10 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (7 ms) [ok]: SUBSCRIBE to one channel more than once (4 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (3 ms) [ok]: PUBLISH/PSUBSCRIBE basics (12 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (6 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (5 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5008 ms) [ok]: PubSub messages with CLIENT REPLY OFF (95 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (3 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (1 ms) [ok]: NUMPATs returns the number of unique patterns (7 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (4 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (3 ms) [ok]: Keyspace notifications: we receive keyspace notifications (49 ms) [ok]: Keyspace notifications: we receive keyevent notifications (47 ms) [ok]: Keyspace notifications: we can receive both kind of events (7 ms) [ok]: Keyspace notifications: we are able to mask events (7 ms) [ok]: Keyspace notifications: general events test (9 ms) [ok]: Keyspace notifications: list events test (10 ms) [ok]: Keyspace notifications: set events test (9 ms) [ok]: Keyspace notifications: zset events test (9 ms) [ok]: Keyspace notifications: hash events test (8 ms) [ok]: Keyspace notifications: stream events test (16 ms) [39/91 done]: integration/failover (5 seconds) Testing unit/pubsubshard [ok]: Keyspace notifications: expired events (triggered expire) (108 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (14 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (10 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (9 ms) [ok]: SSUBSCRIBE to one channel more than once (7 ms) [ok]: Keyspace notifications: expired events (background expire) (115 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (7 ms) [ok]: PUBSUB command basics (1 ms) [ok]: Keyspace notifications: evicted events (9 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (11 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (5 ms) [ok]: Keyspace notifications: new key test (7 ms) [ok]: PSYNC2 #3899 regression: kill first replica (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (14 ms) [ok]: publish to self inside multi (6 ms) [ok]: publish to self inside script (3 ms) [ok]: unsubscribe inside multi, and publish to self (7 ms) [ok]: PubSubShard with CLIENT REPLY OFF (96 ms) [40/91 done]: unit/pubsub (1 seconds) Testing unit/slowlog [ok]: SLOWLOG - check that it starts with an empty log (1 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (204 ms) [ok]: SLOWLOG - max entries is correctly handled (57 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (8 ms) [ok]: SLOWLOG - RESET subcommand works (2 ms) [ok]: setup replication for following tests (107 ms) [ok]: publish message to master and receive on replica (7 ms) [ok]: Make the old master a replica of the new one and check conditions (1017 ms) [ok]: SLOWLOG - logged entry sanity check (204 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (8 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (7 ms) [ok]: dismiss all data types memory (1688 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (31 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (4 ms) [ok]: SLOWLOG - too long arguments are trimmed (3 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1268 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (206 ms) [ok]: SLOWLOG - can clean older entries (205 ms) [41/91 done]: unit/pubsubshard (2 seconds) Testing unit/scripting [ok]: EVAL - Does Lua interpreter replies to our requests? (3 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (2 ms) [ok]: EVAL - Return table with a metatable that call redis (4 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (2 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (2 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (2 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (2 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (2 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (2 ms) [ok]: EVAL - is Lua able to call Redis API? (2 ms) [ok]: EVAL - Redis integer -> Lua type conversion (4 ms) [ok]: EVAL - Lua number -> Redis integer conversion (3 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (3 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (6 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (2 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (3 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (3 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (3 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (5 ms) [ok]: EVAL - Scripts do not block on blpop command (4 ms) [ok]: EVAL - Scripts do not block on brpop command (3 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (3 ms) [ok]: EVAL - Scripts do not block on blmove command (3 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (4 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (3 ms) [ok]: EVAL - Scripts do not block on wait (2 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (9 ms) [ok]: SLOWLOG - can be disabled (408 ms) [ok]: SLOWLOG - count must be >= -1 (3 ms) [ok]: EVAL - Scripts can run non-deterministic commands (4 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (2 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (3 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (2 ms) [ok]: SLOWLOG - get all slow logs (12 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (3 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (2 ms) [ok]: EVAL - JSON string decoding (2 ms) [ok]: EVAL - JSON smoke test (3 ms) [ok]: EVAL - cmsgpack can pack double? (2 ms) [ok]: EVAL - cmsgpack can pack negative int64? (2 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (19 ms) [ok]: PSYNC2 #3899 regression: kill first replica (3 ms) [42/91 done]: unit/slowlog (1 seconds) Testing unit/functions [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9261 ms) [ok]: FUNCTION - Basic usage (4 ms) [ok]: FUNCTION - Load with unknown argument (1 ms) [ok]: FUNCTION - Create an already exiting library raise error (2 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (2 ms) [ok]: FUNCTION - Create a library with wrong name format (1 ms) [ok]: FUNCTION - Create library with unexisting engine (2 ms) [ok]: FUNCTION - Test uncompiled script (1 ms) [ok]: FUNCTION - test replace argument (3 ms) [ok]: FUNCTION - test function case insensitive (1 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (2 ms) [ok]: FUNCTION - test function delete (2 ms) [ok]: FUNCTION - test fcall bad arguments (3 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (1 ms) [ok]: FUNCTION - test fcall negative number of keys (1 ms) [ok]: FUNCTION - test delete on not exiting library (1 ms) [ok]: FUNCTION - test function kill when function is not running (1 ms) [ok]: FUNCTION - test wrong subcommand (2 ms) [ok]: FUNCTION - test loading from rdb (9 ms) [ok]: FUNCTION - test debug reload different options (13 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (12 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (5 ms) [ok]: FUNCTION - test function dump and restore (9 ms) [ok]: XRANGE fuzzing (20480 ms) [ok]: FUNCTION - test function dump and restore with flush argument (6 ms) [ok]: XREVRANGE regression test for issue #5006 (6 ms) [ok]: XREAD streamID edge (no-blocking) (4 ms) [ok]: FUNCTION - test function dump and restore with append argument (12 ms) [ok]: XREAD streamID edge (blocking) (10 ms) [ok]: XADD streamID edge (3 ms) [ok]: FUNCTION - test function dump and restore with replace argument (7 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (3 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (1 ms) [ok]: FUNCTION - test fcall_ro with write command (2 ms) [ok]: FUNCTION - test fcall_ro with read only commands (4 ms) [ok]: FUNCTION - test keys and argv (3 ms) [ok]: FUNCTION - test command get keys on fcall (1 ms) [ok]: FUNCTION - test command get keys on fcall_ro (1 ms) [ok]: Slave should be able to synchronize with the master (107 ms) [ok]: FUNCTION - test function kill (427 ms) [ok]: XTRIM with MAXLEN option basic test (604 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (1003 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (3 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (2 ms) [ok]: EVAL - Able to parse trailing comments (2 ms) [ok]: EVAL_RO - Successful case (3 ms) [ok]: EVAL_RO - Cannot run write commands (11 ms) [ok]: redis.sha1hex() implementation (6 ms) [ok]: Globals protection reading an undeclared global variable (4 ms) [ok]: Globals protection setting an undeclared global* (3 ms) [ok]: lua bit.tohex bug (3 ms) [ok]: XADD with LIMIT consecutive calls (62 ms) [ok]: Test an example script DECR_IF_GT (14 ms) [ok]: PSYNC2: generate load while killing replication links (5002 ms) [ok]: PSYNC2: cluster is consistent after load (x = 4944) (4 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (10 ms) [ok]: XTRIM with ~ is limited (77 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (2 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (1 ms) [ok]: XTRIM without ~ is not limited (78 ms) [ok]: FUNCTION - test script kill not working on function (412 ms) [ok]: XTRIM without ~ and with LIMIT (63 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (5 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (77 ms) [ok]: FUNCTION - test function kill not working on eval (410 ms) [ok]: FUNCTION - test function flush (8 ms) [ok]: FUNCTION - test function wrong argument (2 ms) [ok]: Detect write load to master (1003 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (35 ms) [ok]: XADD with MINID > lastid can propagate correctly (90 ms) [ok]: dismiss client output buffer (3003 ms) [ok]: Connect a replica to the master instance (111 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (2 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (98 ms) [ok]: Slave should be able to synchronize with the master (110 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (3126 ms) [ok]: dismiss client query buffer (219 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (89 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (14891 ms) [ok]: XADD with ~ MINID can propagate correctly (87 ms) [ok]: FUNCTION - creation is replicated to replica (712 ms) [ok]: FUNCTION - call on replica (1 ms) [ok]: FUNCTION - restore is replicated to replica (8 ms) [ok]: FUNCTION - delete is replicated to replica (2 ms) [ok]: FUNCTION - flush is replicated to replica (5 ms) [ok]: Disconnecting the replica from master instance (113 ms) [ok]: FUNCTION - test replication to replica on rdb phase (1 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (2 ms) [ok]: FUNCTION - create on read only replica (1 ms) [ok]: FUNCTION - delete on read only replica (1 ms) [ok]: FUNCTION - function effect is replicated to replica (6 ms) [ok]: FUNCTION - modify key space of read only replica (1 ms) [ok]: Replication: commands with many arguments (issue #1221) (36514 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (99 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (2 ms) [ok]: spopwithcount rewrite srem command (197 ms) [ok]: Detect write load to master (1004 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3396 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (97 ms) [ok]: PSYNC2 #3899 regression: kill first replica (2 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (2 ms) [ok]: XADD can CREATE an empty stream (3 ms) [ok]: XSETID can set a specific ID (1 ms) [ok]: XSETID cannot SETID with smaller ID (2 ms) [ok]: XSETID cannot SETID on non-existent key (1 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (1 ms) [ok]: XSETID errors on negstive offset (1 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (3 ms) [ok]: XSETID cannot set the offset to less than the length (3 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (6 ms) [ok]: dismiss replication backlog (1392 ms) [43/91 done]: integration/dismiss-mem (7 seconds) Testing unit/maxmemory [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (6 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (18 ms) [ok]: Maximum XDEL ID behaves correctly (13 ms) [ok]: XADD with artial ID with maximal seq (3 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (192 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (2 ms) [ok]: Empty stream can be rewrite into AOF correctly (122 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (373 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (125 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (3 ms) [ok]: LIBRARIES - test registration failure revert the entire load (2 ms) [ok]: LIBRARIES - test registration function name collision (1 ms) [ok]: LIBRARIES - test registration function name collision on same library (1 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (1 ms) [ok]: LIBRARIES - test registration with to many arguments (1 ms) [ok]: LIBRARIES - test registration with no string name (1 ms) [ok]: LIBRARIES - test registration with wrong name format (1 ms) [ok]: LIBRARIES - test registration with empty name (1 ms) [ok]: LIBRARIES - math.random from function load (1 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (1 ms) [ok]: LIBRARIES - redis.set_repl from function load (1 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (1 ms) [ok]: LIBRARIES - malicious access test (4 ms) [ok]: LIBRARIES - delete removed all functions on library (1 ms) [ok]: LIBRARIES - register function inside a function (2 ms) [ok]: LIBRARIES - register library with no functions (2 ms) [ok]: XGROUP HELP should not have unexpected options (1 ms) [ok]: XINFO HELP should not have unexpected options (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (50706 ms) [ok]: SMOVE basics - from regular set to intset (21 ms) [ok]: SMOVE basics - from intset to regular set (8 ms) [ok]: SMOVE non existing key (9 ms) [ok]: SMOVE non existing src set (8 ms) [ok]: SMOVE from regular set to non existing destination set (8 ms) [44/91 done]: unit/type/stream (68 seconds) Testing unit/introspection [ok]: SMOVE from intset to non existing destination set (9 ms) [ok]: SMOVE wrong src key type (2 ms) [ok]: SMOVE wrong dst key type (1 ms) [ok]: SMOVE with identical source and destination (2 ms) [ok]: SMOVE only notify dstset when the addition is successful (10 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (13794 ms) [ok]: PING (2 ms) [ok]: CLIENT LIST (1 ms) [ok]: CLIENT LIST with IDs (1 ms) [ok]: CLIENT INFO (1 ms) [ok]: CLIENT KILL with illegal arguments (5 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (13 ms) [ok]: LIBRARIES - load timeout (503 ms) [ok]: LIBRARIES - verify global protection on the load run (1 ms) [ok]: LIBRARIES - named arguments (2 ms) [ok]: LIBRARIES - named arguments, bad function name (1 ms) [ok]: LIBRARIES - named arguments, bad callback type (1 ms) [ok]: LIBRARIES - named arguments, bad description (1 ms) [ok]: LIBRARIES - named arguments, unknown argument (1 ms) [ok]: LIBRARIES - named arguments, missing function name (1 ms) [ok]: LIBRARIES - named arguments, missing callback (1 ms) [ok]: FUNCTION - test function restore with function name collision (12 ms) [ok]: FUNCTION - test function list with code (2 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (1 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (1 ms) [ok]: FUNCTION - test function list libraryname multiple times (1 ms) [ok]: FUNCTION - verify OOM on function load and function restore (6 ms) [ok]: FUNCTION - verify allow-omm allows running any command (4 ms) [ok]: CLIENT KILL close the client connection during bgsave (89 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (43 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (43 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (43 ms) [ok]: MONITOR can log executed commands (4 ms) [ok]: MONITOR can log commands issued by the scripting engine (3 ms) [ok]: MONITOR can log commands issued by functions (3 ms) [ok]: MONITOR supports redacting command arguments (8 ms) [ok]: MONITOR correctly handles multi-exec cases (7 ms) [ok]: MONITOR log blocked command only once (11 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (1 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (1 ms) [ok]: CLIENT SETNAME does not accept spaces (1 ms) [ok]: CLIENT SETNAME can assign a name to this connection (1 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (1 ms) [ok]: After CLIENT SETNAME, connection can still be closed (4 ms) [ok]: CLIENT SETINFO can set a library name to this connection (2 ms) [ok]: CLIENT SETINFO invalid args (3 ms) [ok]: RESET does NOT clean library name (1 ms) [ok]: PSYNC2: cluster is consistent after failover (4 ms) [ok]: CLIENT SETINFO can clear library name (2 ms) [ok]: EVAL does not leak in the Lua stack (4204 ms) [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (1 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (5 ms) [ok]: FUNCTION - write script on fcall_ro (2 ms) [ok]: Number conversion precision test (issue #1118) (2 ms) [ok]: FUNCTION - write script with no-writes flag (1 ms) [ok]: String containing number precision test (regression of issue #1118) (2 ms) [ok]: FUNCTION - deny oom (2 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (2 ms) [ok]: FUNCTION - deny oom on no-writes function (3 ms) [ok]: Scripts can handle commands with incorrect arity (3 ms) [ok]: Correct handling of reused argv (issue #1939) (3 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: FUNCTION - allow stale (7 ms) [ok]: CLUSTER RESET can not be invoke from within a script (2 ms) [ok]: FUNCTION - redis version api (2 ms) [ok]: FUNCTION - function stats (3 ms) [ok]: Script with RESP3 map (8 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (7 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (3 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (1 ms) [ok]: FUNCTION - function test unknown metadata value (1 ms) [ok]: FUNCTION - function test no name (1 ms) [ok]: FUNCTION - function test multiple names (1 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (1 ms) [ok]: FUNCTION - test getmetatable on script load (1 ms) [45/91 done]: unit/functions (5 seconds) Testing unit/introspection-2 [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9956 ms) [46/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/limits [ok]: The microsecond part of the TIME command will not overflow (1 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (701 ms) [ok]: Script return recursive object (527 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (1667 ms) [ok]: Script check unpack with massive arguments (81 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (2 ms) [ok]: Script ACL check (6 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (2 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (2 ms) [ok]: Test loadfile are not available (2 ms) [ok]: Test dofile are not available (2 ms) [ok]: Test print are not available (2 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (3041 ms) [ok]: CONFIG save params special case handled properly (1068 ms) [ok]: CONFIG sanity (101 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (952 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (409 ms) [ok]: Check if maxclients works refusing connections (923 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (127 ms) [47/91 done]: unit/limits (1 seconds) Testing unit/obuf-limits [ok]: CONFIG REWRITE sanity (368 ms) [ok]: CONFIG SET client-output-buffer-limit (5 ms) [ok]: First server should have role slave after SLAVEOF (107 ms) [ok]: Data divergence can happen under default conditions (11 ms) [ok]: Data divergence is allowed on writable replicas (7 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (349 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (1079 ms) [48/91 done]: integration/replication-4 (51 seconds) Testing unit/bitops [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: BITCOUNT returns 0 against non existing key (2 ms) [ok]: BITCOUNT returns 0 with out of range indexes (2 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (1 ms) [ok]: BITCOUNT against test vector #1 (3 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (193 ms) [ok]: BITCOUNT against test vector #2 (2 ms) [ok]: BITCOUNT against test vector #3 (2 ms) [ok]: BITCOUNT against test vector #4 (2 ms) [ok]: BITCOUNT against test vector #5 (1 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2963 ms) [ok]: Timedout script does not cause a false dead client (286 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (4937 ms) [49/91 done]: integration/psync2-master-restart (16 seconds) Testing unit/bitfield [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (835 ms) [ok]: CONFIG SET with multiple args (5 ms) [ok]: CONFIG SET rollback on set error (4 ms) [ok]: BITFIELD signed SET and GET basics (2 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (1 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (1 ms) [ok]: BITFIELD with only key as argument (1 ms) [ok]: BITFIELD # form (2 ms) [ok]: CONFIG SET rollback on apply error (13 ms) [ok]: CONFIG SET duplicate configs (1 ms) [ok]: BITFIELD basic INCRBY form (2 ms) [ok]: CONFIG SET set immutable (1 ms) [ok]: BITFIELD chaining of multiple commands (1 ms) [ok]: BITFIELD unsigned overflow wrap (2 ms) [ok]: BITFIELD unsigned overflow sat (2 ms) [ok]: BITFIELD signed overflow wrap (2 ms) [ok]: CONFIG GET hidden configs (12 ms) [ok]: BITFIELD signed overflow sat (2 ms) [ok]: CONFIG GET multiple args (2 ms) [ok]: Timedout script link is still usable after Lua returns (485 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: valkey-server command line arguments - error cases (282 ms) [ok]: BITCOUNT fuzzing without start/end (929 ms) [ok]: valkey-server command line arguments - allow passing option name and option value in the same arg (250 ms) [50/91 done]: integration/psync2-pingoff (16 seconds) Testing unit/geo [ok]: GEO with wrong type src key (8 ms) [ok]: GEO with non existing src key (4 ms) [ok]: GEO BYLONLAT with empty search (2 ms) [ok]: GEO BYMEMBER with non existing member (3 ms) [ok]: GEOADD create (1 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (2 ms) [ok]: GEOADD update with NX option (1 ms) [ok]: GEOADD update with XX option (2 ms) [ok]: GEOADD update with CH NX option (1 ms) [ok]: GEOADD update with CH XX option (1 ms) [ok]: GEOADD update with XX NX option will return syntax error (1 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (1 ms) [ok]: Check geoset values (1 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (1 ms) [ok]: GEOSEARCH simple (sorted) (1 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (1 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (1 ms) [ok]: GEOSEARCH withdist (sorted) (1 ms) [ok]: GEORADIUS with COUNT (1 ms) [ok]: GEORADIUS with multiple WITH* tokens (3 ms) [ok]: GEORADIUS with ANY not sorted by default (1 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (1 ms) [ok]: GEORADIUS with COUNT but missing integer argument (1 ms) [ok]: GEORADIUS with COUNT DESC (1 ms) [ok]: GEORADIUS HUGE, issue #2767 (2 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (5 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (2 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (1 ms) [ok]: GEOSEARCH vs GEORADIUS (2 ms) [ok]: GEOSEARCH non square, long and narrow (3 ms) [ok]: GEOSEARCH corner point test (2 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (1 ms) [ok]: GEOHASH is able to return geohash strings (1 ms) [ok]: GEOHASH with only key as argument (2 ms) [ok]: GEOPOS simple (3 ms) [ok]: GEOPOS missing element (2 ms) [ok]: GEOPOS with only key as argument (2 ms) [ok]: GEODIST simple & unit (3 ms) [ok]: GEODIST missing elements (2 ms) [ok]: GEORADIUS STORE option: syntax error (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (1 ms) [ok]: valkey-server command line arguments - wrong usage that we support anyway (249 ms) [ok]: GEORANGE STORE option: incompatible options (3 ms) [ok]: GEORANGE STORE option: plain usage (3 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (4 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (2 ms) [ok]: GEORANGE STOREDIST option: plain usage (3 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (2 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (4 ms) [ok]: GEOSEARCH the box spans -180° or 180° (2 ms) [ok]: GEOSEARCH with small distance (2 ms) [ok]: Timedout scripts and unblocked command (808 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3006 ms) [ok]: valkey-server command line arguments - allow option value to use the `--` prefix (258 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (1533 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (10 ms) [ok]: BITFIELD overflow detection fuzzing (1245 ms) [ok]: valkey-server command line arguments - option name and option value in the same arg and `--` prefix (252 ms) [ok]: Before the replica connects we issue two EVAL commands (3 ms) [ok]: Connect a replica to the master instance (107 ms) [ok]: Replication of script multiple pushes to list with BLPOP (5 ms) [ok]: Lua scripts using SELECT are replicated correctly (5 ms) [ok]: Dumping an RDB - functions only: no (13765 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6292 ms) [ok]: BITCOUNT fuzzing with start/end (1533 ms) [ok]: BITCOUNT with start, end (6 ms) [ok]: BITCOUNT syntax error #1 (1 ms) [ok]: BITCOUNT syntax error #2 (1 ms) [ok]: BITCOUNT regression test for github issue #582 (2 ms) [ok]: BITCOUNT misaligned prefix (2 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (1 ms) [ok]: BITOP NOT (empty string) (2 ms) [ok]: BITOP NOT (known string) (1 ms) [ok]: BITOP where dest and target are the same key (1 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (3 ms) [ok]: BITOP missing key is considered a stream of zero (3 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (3 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (1047 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Without maxmemory small integers are shared (4 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (2 ms) [ok]: With maxmemory and LRU policy integers are not shared (3 ms) [ok]: BITOP and fuzzing (511 ms) [ok]: Slave should be able to synchronize with the master (104 ms) [ok]: valkey-server command line arguments - save with empty input (1285 ms) [ok]: PSYNC2: generate load while killing replication links (5003 ms) [ok]: PSYNC2: cluster is consistent after load (x = 12936) (4 ms) [ok]: Connect a replica to the master instance (106 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (2 ms) [ok]: Test selective replication of certain Redis commands from Lua (7 ms) [ok]: PRNG is seeded randomly for command replication (3 ms) [ok]: Using side effects is not a problem with command replication (3 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (12 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (3 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (2 ms) [ok]: valkey-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (264 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: BITFIELD overflow wrap fuzzing (1705 ms) [ok]: BITFIELD regression for #3221 (2 ms) [ok]: BITFIELD regression for #3564 (10 ms) [ok]: BITFIELD_RO with only key as argument (1 ms) [ok]: BITFIELD_RO fails when write option is used (2 ms) [ok]: cannot modify protected configuration - no (2 ms) [ok]: cannot modify protected configuration - local (12 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (4272 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (6 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (6 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (5 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (6 ms) [ok]: BITOP or fuzzing (806 ms) [ok]: BITFIELD: setup slave (107 ms) [ok]: BITFIELD: write on master, read on slave (7 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (1 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (1035 ms) [ok]: Detect write load to master (1002 ms) [ok]: test RESP2/2 big number protocol parsing (2 ms) [ok]: test RESP2/2 malformed big number protocol parsing (2 ms) [ok]: test RESP2/2 map protocol parsing (2 ms) [ok]: test RESP2/2 set protocol parsing (2 ms) [ok]: test RESP2/2 double protocol parsing (2 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (2 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (2 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (2 ms) [51/91 done]: unit/bitfield (3 seconds) Testing unit/memefficiency [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (2 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (2 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (1 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (2 ms) [ok]: test RESP3/3 set protocol parsing (2 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (12 ms) [ok]: Script delete the expired key (4 ms) [ok]: TIME command using cached time (12 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (2 ms) [ok]: Script block the time in some expiration related commands (86 ms) [ok]: RESTORE expired keys with expiration time (12 ms) [ok]: intsets implementation stress testing (6661 ms) [ok]: TOUCH alters the last access time of a key (3006 ms) [52/91 done]: unit/type/set (75 seconds) Testing unit/hyperloglog [ok]: BITOP xor fuzzing (583 ms) [ok]: BITOP NOT fuzzing (66 ms) [ok]: BITOP with integer encoded source objects (2 ms) [ok]: BITOP with non string source key (2 ms) [ok]: BITOP with empty string after non empty string (issue #529) (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (2 ms) [ok]: BITPOS bit=0 with empty key returns 0 (1 ms) [ok]: EVAL - Return _G (1 ms) [ok]: BITPOS bit=1 with empty key returns -1 (2 ms) [ok]: EVAL - Return table with a metatable that raise error (1 ms) [ok]: BITPOS bit=0 with string less than 1 word works (1 ms) [ok]: EVAL - Return table with a metatable that call redis (2 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (1 ms) [ok]: BITPOS bit=1 with string less than 1 word works (1 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: BITPOS bit=0 starting at unaligned address (2 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (1 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (2 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (8 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (2 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (2 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (8 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (3 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (2 ms) [ok]: EVAL - Scripts do not block on blpop command (2 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (18 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: BITPOS bit=0 works with intervals (4 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (2 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (2 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: BITPOS bit=1 works with intervals (4 ms) [ok]: BITPOS bit=0 changes behavior if end is given (2 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (5 ms) [ok]: EVAL - Scripts can run non-deterministic commands (2 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (2 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (19 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1010 ms) [ok]: BZPOPMIN with same key multiple times should work (9 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (5 ms) [ok]: BZPOPMIN with variadic ZADD (4 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (2 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (679 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (2 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (2 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (2 ms) [ok]: EVAL_RO - Cannot run write commands (6 ms) [ok]: redis.sha1hex() implementation (2 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (7 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (916 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (1730 ms) [ok]: HyperLogLog self test passes (1051 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (2 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1006 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (6 ms) Waiting for process 55921 to exit... [ok]: BZMPOP_MIN with variadic ZADD (4 ms) [ok]: Memory efficiency with values in range 32 (1708 ms) [ok]: Dumping an RDB - functions only: yes (3744 ms) [ok]: PSYNC2 #3899 regression: verify consistency (78 ms) [ok]: Scan mode (254 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (2 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (889 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1006 ms) [ok]: BZPOP/BZMPOP against wrong type (6 ms) [ok]: BZMPOP with illegal argument (8 ms) [ok]: BZMPOP with multiple blocked clients (16 ms) [ok]: config during loading (3049 ms) [53/91 done]: integration/psync2-reg (22 seconds) Testing unit/lazyfree [ok]: BZMPOP propagate as pop with count command to replica (133 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (11 ms) [ok]: HyperLogLogs are promote from sparse to dense (1462 ms) [ok]: Change hll-sparse-max-bytes (3 ms) [ok]: PSYNC2: cluster is consistent after failover (3 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (1595 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (964 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (200 ms) [ok]: TOUCH alters the last access time of a key in no-touch mode (3005 ms) [ok]: CONFIG REWRITE handles rename-command properly (506 ms) [54/91 done]: unit/bitops (8 seconds) Testing unit/wait [ok]: Memory efficiency with values in range 64 (1714 ms) [ok]: UNLINK can reclaim memory in background (585 ms) [ok]: Setup slave (104 ms) [ok]: WAIT out of range timeout (milliseconds) (2 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (3 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (560 ms) [ok]: Connecting as a replica (2141 ms) [ok]: EVAL does not leak in the Lua stack (3042 ms) [ok]: CONFIG REWRITE handles alias config properly (874 ms) [55/91 done]: unit/introspection (11 seconds) Testing unit/pause [ok]: Call Redis command with many args from Lua (issue #1764) (5 ms) [ok]: Number conversion precision test (issue #1118) (2 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (3 ms) [ok]: Correct handling of reused argv (issue #1939) (2 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (2 ms) [ok]: Script with RESP3 map (8 ms) [ok]: Test read commands are not blocked by client pause (8 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1105 ms) [ok]: TOUCH returns the number of existing keys specified (2 ms) [ok]: command stats for GEOADD (6 ms) [ok]: errors stats for GEOADD (5 ms) [ok]: command stats for EXPIRE (5 ms) [ok]: command stats for BRPOP (4 ms) [ok]: command stats for MULTI (9 ms) [ok]: command stats for scripts (7 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (1 ms) [ok]: COMMAND GETKEYSANDFLAGS (3 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (1 ms) [ok]: COMMAND GETKEYS XGROUP (1 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (11 ms) [ok]: COMMAND LIST syntax error (2 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (13 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (1 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (2 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (6 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (1 ms) [ok]: SET command will not be marked with movablekeys (3 ms) [ok]: GET command will not be marked with movablekeys (2 ms) [ok]: MSET command will not be marked with movablekeys (2 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: LMOVE command will not be marked with movablekeys (2 ms) [ok]: LPOP command will not be marked with movablekeys (2 ms) [ok]: BLPOP command will not be marked with movablekeys (2 ms) [ok]: PING command will not be marked with movablekeys (1 ms) [ok]: MEMORY command will not be marked with movablekeys (4 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (2 ms) [ok]: lazy free a stream with all types of metadata (322 ms) [ok]: RENAME command will not be marked with movablekeys (2 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (1 ms) [ok]: lazy free a stream with deleted cgroup (7 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (2 ms) [ok]: XREAD command is marked with movablekeys (2 ms) [ok]: EVAL command is marked with movablekeys (2 ms) [ok]: SORT command is marked with movablekeys (3 ms) [ok]: SORT_RO command is marked with movablekeys (2 ms) [ok]: MIGRATE command is marked with movablekeys (2 ms) [ok]: GEORADIUS command is marked with movablekeys (3 ms) [56/91 done]: unit/lazyfree (2 seconds) Testing unit/querybuf [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (260 ms) [57/91 done]: unit/introspection-2 (11 seconds) Testing unit/tls [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (1498 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (105 ms) [ok]: Test write commands are paused by RO (4 ms) [ok]: Test special commands are paused by RO (6 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (5 ms) [ok]: Test write multi-execs are blocked by pause RO (4 ms) [ok]: Test scripts are blocked by pause RO (6 ms) [ok]: Test RO scripts are not blocked by pause RO (6 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (6 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (6 ms) [ok]: Test may-replicate commands are rejected in RO scripts (2 ms) [ok]: Test multiple clients can be queued up and unblocked (8 ms) [ok]: Script return recursive object (550 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1060 ms) [ok]: Test clients with syntax errors will get responses immediately (2 ms) [ok]: Script check unpack with massive arguments (83 ms) [ok]: Script read key with expiration set (2 ms) [ok]: Script del key with expiration set (1 ms) [58/91 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: Script ACL check (5 ms) [ok]: Binary code loading failed (2 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (2 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (2 ms) [ok]: Try trick readonly table on json table (2 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test both active and passive expires are skipped during client pause (108 ms) [ok]: Test loadfile are not available (2 ms) [ok]: Test dofile are not available (2 ms) [ok]: Test print are not available (1 ms) [ok]: Test that client pause starts at the end of a transaction (6 ms) [ok]: Clients are able to enable tracking and redirect it (1 ms) [ok]: The other connection is able to get invalidations (3 ms) [ok]: The client is now able to disable tracking (1 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (4 ms) [ok]: Adding prefixes to BCAST mode works (1 ms) [ok]: Tracking NOLOOP mode in standard mode works (2 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (2 ms) [ok]: Test when replica paused, offset would not grow (11 ms) [ok]: Test replica offset would grow after unpause (3 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (8 ms) [59/91 done]: unit/pause (1 seconds) Testing unit/oom-score-adj [ok]: Memory efficiency with values in range 128 (1866 ms) [ok]: CONFIG SET oom-score-adj works as expected (43 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (4 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (1 ms) [ok]: CONFIG SET oom score restored on disable (2 ms) [ok]: CONFIG SET oom score relative and absolute (2 ms) [ok]: CONFIG SET out-of-range oom score (1 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (406 ms) [60/91 done]: unit/oom-score-adj (0 seconds) Testing unit/shutdown [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (268 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (148 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1106 ms) [ok]: ziplist implementation: encoding stress testing (40938 ms) [61/91 done]: unit/type/list-3 (80 seconds) Testing unit/networking [ok]: SHUTDOWN ABORT can cancel SIGTERM (20 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: Timedout script does not cause a false dead client (258 ms) [ok]: Temp rdb will be deleted in signal handle (85 ms) [ok]: Tracking gets notification of lazy expired keys (104 ms) [ok]: HELLO 3 reply is correct (1 ms) [ok]: HELLO without protover (4 ms) [ok]: RESP3 based basic invalidation (2 ms) [ok]: RESP3 tracking redirection (2 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (3 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (2 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (3 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (7 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (4 ms) [ok]: Different clients can redirect to the same connection (4 ms) [ok]: Different clients using different protocols can track the same key (4 ms) [ok]: No invalidation message when using OPTIN option (4 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (2 ms) [ok]: Invalidation message sent when using OPTOUT option (2 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (3 ms) [ok]: Able to redirect to a RESP3 client (5 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (4 ms) [ok]: BCAST with prefix collisions throw errors (4 ms) [ok]: hdel deliver invalidate message after response in the same connection (3 ms) [ok]: RDB save will be failed in shutdown (10 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (1590 ms) [ok]: CONFIG SET port number (252 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (115 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (4 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (94 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (3 ms) [ok]: Tracking invalidation message of eviction keys should be before response (13 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (9 ms) [ok]: Unblocked BLMOVE gets notification after response (5 ms) [ok]: Clean up rdb same named folder (2 ms) [ok]: ZSET skiplist order consistency when elements are moved (3451 ms) [ok]: ZRANGESTORE basic (3 ms) [ok]: ZRANGESTORE RESP3 (2 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (1 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (1 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGESTORE - src key missing (1 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (3 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (4 ms) [ok]: ZRANGE invalid syntax (2 ms) [ok]: ZRANDMEMBER - listpack (27 ms) [ok]: Tracking gets notification on tracking table key eviction (93 ms) [ok]: Invalidation message received for flushall (8 ms) [ok]: Invalidation message received for flushdb (7 ms) [ok]: ZRANDMEMBER - skiplist (25 ms) [ok]: Test ASYNC flushall (10 ms) [ok]: ZRANDMEMBER with RESP3 (2 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (1 ms) [ok]: ZRANDMEMBER count overflow (2 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (1 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (7 ms) [ok]: Timedout script link is still usable after Lua returns (433 ms) [ok]: CONFIG SET bind address (247 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (105 ms) [62/91 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (392 ms) [ok]: Tracking info is correct (14 ms) [ok]: CLIENT GETREDIR provides correct client id (3 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (2 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (3 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (3 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (3 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (9 ms) [ok]: HyperLogLog sparse encoding stress test (3669 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (3 ms) [ok]: Regression test for #11715 (9 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (2 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (2 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (1 ms) [ok]: RESP3 based basic invalidation with client reply off (8 ms) [ok]: RESP2 based basic invalidation with client reply off (51 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1104 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (10 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (7 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (34 ms) [ok]: client evicted due to large argv (178 ms) [ok]: CONFIG SET bind-source-addr (558 ms) [ok]: client evicted due to large query buf (91 ms) [ok]: client evicted due to percentage of maxmemory (32 ms) [ok]: query buffer resized correctly (2437 ms) [ok]: Coverage: Basic CLIENT CACHING (3 ms) [ok]: Coverage: Basic CLIENT REPLY (1 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (1 ms) [ok]: Coverage: Basic CLIENT GETREDIR (1 ms) [ok]: Timedout scripts and unblocked command (747 ms) [ok]: query buffer resized correctly when not idle (77 ms) [ok]: Memory efficiency with values in range 1024 (1895 ms) [63/91 done]: unit/tracking (3 seconds) Testing unit/violations [ok]: client evicted due to large multi buf (182 ms) [ok]: ZRANDMEMBER with - skiplist (916 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms) [ok]: Default bind address configuration handling (236 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (8 ms) [ok]: WAITAOF local copy before fsync (103 ms) [ok]: Protected mode works as expected (9 ms) [ok]: SORT adds integer field to list (4 ms) [64/91 done]: unit/violations (0 seconds) Testing unit/replybufsize [65/91 done]: unit/networking (2 seconds) Testing unit/cluster/announced-endpoints [ok]: Before the replica connects we issue two EVAL commands (3 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7838 ms) [ok]: Connect a replica to the master instance (105 ms) [ok]: Replication of script multiple pushes to list with BLPOP (5 ms) [ok]: Lua scripts using SELECT are replicated correctly (4 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (1666 ms) [ok]: PSYNC2: generate load while killing replication links (5001 ms) [ok]: PSYNC2: cluster is consistent after load (x = 23251) (3 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (7 ms) [ok]: PSYNC2: --- CYCLE 4 --- (1 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (2 ms) [ok]: client evicted due to watched key list (849 ms) [ok]: Piping raw protocol (4002 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: Options -X with illegal argument (23 ms) [ok]: verify reply buffer limits (566 ms) [ok]: DUMP RESTORE with -x option (36 ms) [ok]: Slave should be able to synchronize with the master (104 ms) [ok]: DUMP RESTORE with -X option (37 ms) [66/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [67/91 done]: integration/valkey-cli (27 seconds) Testing unit/cluster/cli [ok]: ZRANDMEMBER with - listpack (982 ms) [ok]: zset score double range (3 ms) [ok]: WAITAOF local copy everysec (1002 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (67 ms) [ok]: WAITAOF local copy with appendfsync always (3 ms) [ok]: WAITAOF local wait and then stop aof (5 ms) [ok]: WAITAOF local on server with aof disabled (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (29 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (5 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (6 ms) [68/91 done]: unit/type/zset (83 seconds) Testing unit/cluster/scripting [ok]: WAITAOF local if AOFRW was postponed (303 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (5 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (16744 ms) [ok]: Connect a replica to the master instance (105 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: Redis.set_repl() don't accept invalid values (2 ms) [ok]: Test selective replication of certain Redis commands from Lua (6 ms) [ok]: PRNG is seeded randomly for command replication (2 ms) [ok]: Using side effects is not a problem with command replication (3 ms) [ok]: WAITAOF replica copy before fsync (152 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (2 ms) [ok]: Detect write load to master (1003 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (1528 ms) [ok]: WAITAOF replica copy everysec (647 ms) [ok]: test RESP2/2 big number protocol parsing (2 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (2 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (2 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (2 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (2 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (1 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (2 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (12 ms) [ok]: Script delete the expired key (5 ms) [ok]: TIME command using cached time (12 ms) [ok]: Script block the time in some expiration related commands (86 ms) [ok]: RESTORE expired keys with expiration time (12 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (113 ms) [ok]: query buffer resized correctly with fat argv (2931 ms) [69/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/hostnames [ok]: PSYNC2: Set #1 to replicate from #3 (2 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (1 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (2 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (3 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (2 ms) [ok]: Test change cluster-announce-bus-port at runtime (209 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (2 ms) [ok]: EVAL - Scripts do not block on blmove command (2 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (4 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (2 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (3 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (3 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (1 ms) [ok]: Script no-cluster flag (1 ms) [70/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: Create 3 node cluster (1932 ms) [ok]: Run blocking command on cluster node3 (2 ms) [ok]: Perform a Resharding (25 ms) [71/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/multi-slot-operations [ok]: WAITAOF replica copy everysec with AOFRW (1008 ms) [ok]: Verify command got unblocked after resharding (93 ms) [ok]: Key lazy expires during key migration (18 ms) [ok]: Coverage: Basic cluster commands (9 ms) [ok]: Wait for cluster to be stable (45 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (16 ms) [ok]: Sanity test push cmd after resharding (3 ms) [ok]: Run blocking command again on cluster node1 (2 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (712 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (2 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (5 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (2 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (2111 ms) [ok]: PSYNC2: cluster is consistent after failover (4 ms) [ok]: Kill a cluster node and wait for fail state (1612 ms) [ok]: Verify command got unblocked after cluster failure (3 ms) [ok]: client evicted due to pubsub subscriptions (4576 ms) [ok]: Memory efficiency with values in range 16384 (5577 ms) [ok]: client evicted due to tracking redirection (172 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2136 ms) [72/91 done]: unit/memefficiency (13 seconds) Testing unit/cluster/slot-ownership [ok]: WAITAOF replica copy everysec->always with AOFRW (114 ms) [ok]: WAITAOF replica copy appendfsync always (3 ms) [ok]: Set cluster human announced nodename and let it propagate (222 ms) [ok]: Set cluster hostnames and verify they are propagated (243 ms) [ok]: EVAL does not leak in the Lua stack (2267 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (6 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (2 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (2 ms) [ok]: Scripts can handle commands with incorrect arity (3 ms) [ok]: Correct handling of reused argv (issue #1939) (4 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (9 ms) [ok]: Continuous slots distribution (50 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (7 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (5 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (22 ms) [ok]: Update hostnames and make sure they are all eventually propagated (136 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (239 ms) [73/91 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/links [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (122 ms) [ok]: WAITAOF replica copy if replica is blocked (811 ms) [ok]: Script return recursive object (553 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (2469 ms) [ok]: Client blocked on XREADGROUP while stream's slot is migrated (14 ms) [ok]: Script check unpack with massive arguments (79 ms) [ok]: Script read key with expiration set (2 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (3 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (1 ms) [ok]: Test print are not available (1 ms) [74/91 done]: unit/cluster/misc (6 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (405 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1004 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (223 ms) [ok]: Timedout script does not cause a false dead client (234 ms) [ok]: WAITAOF on promoted replica (500 ms) [ok]: Timedout script link is still usable after Lua returns (395 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (232 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (113 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (2265 ms) [ok]: Timedout scripts and unblocked command (832 ms) [76/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: Functions are added to new node on valkey-cli cluster add-node (3056 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (13 ms) [ok]: Human nodenames are visible in log messages (3567 ms) [ok]: Before the replica connects we issue two EVAL commands (2 ms) [ok]: Connect a replica to the master instance (106 ms) [ok]: Replication of script multiple pushes to list with BLPOP (4 ms) [ok]: Lua scripts using SELECT are replicated correctly (3 ms) [77/91 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: PSYNC2: generate load while killing replication links (5001 ms) [ok]: PSYNC2: cluster is consistent after load (x = 32455) (4 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (11 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (3 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (2 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2005 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3764 ms) [ok]: Test restart will keep hostname information (256 ms) [ok]: Test hostname validation (4 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (511 ms) [ok]: Connect a replica to the master instance (108 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (2 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (6 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (2 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (2 ms) [78/91 done]: unit/cluster/hostnames (8 seconds) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (2326 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9414 ms) [ok]: WAITAOF master isn't configured to do AOF (1003 ms) [ok]: Each node has two links with each peer (71 ms) [ok]: Validate cluster links format (10 ms) [ok]: WAITAOF replica isn't configured to do AOF (112 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (12 ms) [ok]: Script delete the expired key (4 ms) [ok]: TIME command using cached time (11 ms) [ok]: Script block the time in some expiration related commands (85 ms) [ok]: RESTORE expired keys with expiration time (12 ms) [ok]: Client output buffer hard limit is enforced (23719 ms) [ok]: Slave should be able to synchronize with the master (104 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (1 ms) [ok]: Script - disallow write on OOM (3 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (1 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (3 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (2 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (2 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (2 ms) [ok]: EVAL - Scripts do not block on blpop command (2 ms) [ok]: Verify that single primary marks replica as failed (3136 ms) [ok]: EVAL - Scripts do not block on brpop command (2 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (2 ms) [ok]: EVAL - Scripts do not block on blmove command (2 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (2 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (6 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (2 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (897 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (714 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (2 ms) [ok]: EVAL - Numerical sanity check from bitop (4 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (2 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: Detect write load to master (1002 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (2 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (78 ms) [ok]: SCRIPTING FLUSH ASYNC (43 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (1 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (1 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (2 ms) [ok]: SORT BY output gets ordered for scripting (2 ms) [ok]: SORT BY with GET gets ordered for scripting (2 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (1 ms) [ok]: Migrate the last slot away from a node using valkey-cli (4086 ms) [ok]: WAITAOF master sends PING after last write (1205 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (2504 ms) [ok]: PSYNC2: cluster is consistent after failover (4 ms) [ok]: EVAL does not leak in the Lua stack (1615 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (39 ms) [ok]: MGET: mget shouldn't be propagated in Lua (97 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (99 ms) [ok]: WAITAOF master client didn't send any write command (1205 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (365 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (6 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (3 ms) [ok]: Correct handling of reused argv (issue #1939) (3 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (8 ms) [ok]: Script return recursive object (585 ms) [ok]: Script check unpack with massive arguments (93 ms) [ok]: Script read key with expiration set (3 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (4 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redis table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (1 ms) [ok]: client evicted due to client tracking prefixes (10561 ms) [ok]: valkey-cli --cluster create with cluster-port (1946 ms) [ok]: WAITAOF master client didn't send any command (1204 ms) [ok]: client evicted due to output buf (101 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (2495 ms) [ok]: client no-evict on (102 ms) [ok]: client no-evict off (111 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (405 ms) [ok]: avoid client eviction when client is freed by output buffer limit (276 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (336 ms) [ok]: Timedout script does not cause a false dead client (314 ms) [ok]: valkey-cli --cluster add-node with cluster-port (1251 ms) [79/91 done]: unit/cluster/cli (16 seconds) [ok]: decrease maxmemory-clients causes client eviction (665 ms) [ok]: Timedout script link is still usable after Lua returns (492 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (5907 ms) [ok]: Verify that multiple primaries mark replica as failed (3435 ms) [ok]: evict clients only until below limit (427 ms) [ok]: Timedout scripts and unblocked command (816 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (16265 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (207 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (2584 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (10 ms) [ok]: PSYNC2: generate load while killing replication links (5002 ms) [ok]: PSYNC2: cluster is consistent after load (x = 39468) (3 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (8 ms) [ok]: PSYNC2: Bring the master back again for next test (14 ms) [ok]: Before the replica connects we issue two EVAL commands (3 ms) [ok]: evict clients in right order (large to small) (484 ms) [ok]: Connect a replica to the master instance (107 ms) [ok]: Now use EVALSHA against the master, with both SHAs (2 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (1 ms) [ok]: Replication of script multiple pushes to list with BLPOP (5 ms) [ok]: EVALSHA replication when first call is readonly (3 ms) [ok]: Lua scripts using SELECT are replicated correctly (3 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (373 ms) [ok]: client total memory grows during client no-evict (154 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3382 ms) [ok]: client total memory grows during maxmemory-clients disabled (151 ms) [80/91 done]: unit/client-eviction (20 seconds) [ok]: Connect a replica to the master instance (106 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (2 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (4 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (2 ms) [81/91 done]: integration/psync2 (48 seconds) [ok]: Disconnect link when send buffer limit reached (9389 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (2334 ms) [ok]: Test scripting debug protocol parsing (3 ms) [ok]: Test scripting debug lua stack overflow (4 ms) { ping} { "+PONG"} [ok]: Test scripting debug lua server invocations (3 ms) [ok]: Link memory increases with publishes (709 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (12 ms) [ok]: Script delete the expired key (4 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2377 ms) [ok]: TIME command using cached time (11 ms) [ok]: Script block the time in some expiration related commands (85 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: Shebang support for lua engine (1 ms) [ok]: Unknown shebang option (0 ms) [ok]: Link memory resets after publish messages flush (579 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (7 ms) [ok]: no-writes shebang flag (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9375 ms) [82/91 done]: unit/cluster/links (16 seconds) [ok]: no-writes shebang flag on replica (120 ms) [ok]: not enough good replicas (4 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (2076 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1412 ms) [ok]: setup replication for following tests (107 ms) [ok]: not enough good replicas state change during long script (1464 ms) [ok]: allow-stale shebang flag (7 ms) [ok]: reject script do not cause a Lua stack leak (20 ms) [ok]: Consistent eval error reporting (47 ms) [ok]: LUA redis.error_reply API (4 ms) [ok]: LUA redis.error_reply API with empty string (2 ms) [ok]: LUA redis.status_reply API (2 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (2 ms) [83/91 done]: unit/scripting (43 seconds) [ok]: Slave should be able to synchronize with the master (1827 ms) [ok]: Detect write load to master (0 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (682 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (72 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (7032 ms) [84/91 done]: unit/wait (29 seconds) [ok]: No response for single command if client output buffer hard limit is enforced (186 ms) [ok]: Slave should be able to synchronize with the master (814 ms) [ok]: Detect write load to master (0 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1053 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (77 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (54 ms) [ok]: Obuf limit, KEYS stopped mid-run (246 ms) [85/91 done]: unit/obuf-limits (38 seconds) [ok]: Only primary with slots has the right to mark a node as failed (11854 ms) [86/91 done]: unit/cluster/failure-marking (24 seconds) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6272 ms) [ok]: Slave should be able to synchronize with the master (816 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7808 ms) [ok]: Slave should be able to synchronize with the master (815 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9463 ms) [ok]: Slave should be able to synchronize with the master (817 ms) [ok]: Detect write load to master (1 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (53846 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (5 ms) [ok]: PFMERGE results on the cardinality of union of sets (3 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (4 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (3 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (40142 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (1 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (466 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9438 ms) [ok]: Slave should be able to synchronize with the master (816 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (39 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (2 ms) [ok]: Slave should be able to synchronize with the master (817 ms) [ok]: Detect write load to master (1 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (373 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (681 ms) [ok]: Busy script during async loading (894 ms) [ok]: Blocked commands and configs during async-loading (448 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (2 ms) Waiting for process 61786 to exit... Waiting for process 61786 to exit... [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6274 ms) Waiting for process 61786 to exit... [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (18293 ms) Waiting for process 61786 to exit... [ok]: Slave should be able to synchronize with the master (814 ms) [ok]: Detect write load to master (0 ms) Waiting for process 61786 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7841 ms) [ok]: Slave should be able to synchronize with the master (816 ms) [ok]: Detect write load to master (1 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (11206 ms) [ok]: diskless loading short read (10905 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9424 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (8496 ms) [ok]: PFADD / PFCOUNT cache invalidation works (7 ms) [87/91 done]: unit/hyperloglog (98 seconds) [ok]: Slave should be able to synchronize with the master (1826 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10474 ms) [88/91 done]: integration/replication-psync (163 seconds) [ok]: diskless no replicas drop during rdb pipe (23726 ms) [ok]: diskless slow replicas drop during rdb pipe (12296 ms) [ok]: GEOSEARCH fuzzy test - byradius (132153 ms) [ok]: diskless fast replicas drop during rdb pipe (11998 ms) [ok]: diskless all replicas drop during rdb pipe (1948 ms) [ok]: diskless timeout replicas drop during rdb pipe (11602 ms) [ok]: diskless replication child being killed is collected (1829 ms) [ok]: replication child dies when parent is killed - diskless: yes (1221 ms) [ok]: replication child dies when parent is killed - diskless: no (1525 ms) [ok]: diskless replication read pipe cleanup (1593 ms) [ok]: replicaof right after disconnection (1856 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (955 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (5 ms) [ok]: Discard cache master before loading transferred RDB when full sync (115 ms) [ok]: replica can handle EINTR if use diskless load (700 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (101 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (107 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (220 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (114 ms) [ok]: PSYNC with wrong offset should throw error (4 ms) [ok]: Test replication with lazy expire (116 ms) [89/91 done]: integration/replication (227 seconds) [ok]: GEOSEARCH fuzzy test - bybox (47943 ms) [ok]: GEOSEARCH box edges fuzzy test (194 ms) [90/91 done]: unit/geo (181 seconds) [ok]: slave buffer are counted correctly (169778 ms) [ok]: replica buffer don't induce eviction (54903 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (907 ms) [ok]: client tracking don't cause eviction feedback loop (2684 ms) [ok]: propagation with eviction (118 ms) [ok]: propagation with eviction in MULTI (113 ms) [ok]: lru/lfu value of the key just added (7 ms) [91/91 done]: unit/maxmemory (269 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (0 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (1 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (1 seconds) Testing solo test [91/91 done]: defrag (3 seconds) The End Execution time of different units: 0 seconds - unit/printver 1 seconds - unit/info-command 1 seconds - unit/type/incr 1 seconds - unit/protocol 2 seconds - unit/auth 2 seconds - unit/keyspace 3 seconds - unit/info 0 seconds - unit/quit 5 seconds - unit/type/stream-cgroups 5 seconds - unit/multi 1 seconds - unit/acl-v2 3 seconds - unit/acl 13 seconds - unit/expire 17 seconds - unit/type/hash 19 seconds - unit/type/list 17 seconds - unit/other 23 seconds - unit/type/string 21 seconds - unit/latency-monitor 29 seconds - unit/scan 26 seconds - integration/block-repl 21 seconds - integration/replication-3 40 seconds - unit/sort 13 seconds - integration/shutdown 2 seconds - integration/aof-race 32 seconds - integration/replication-2 12 seconds - integration/aof-multi-part 1 seconds - integration/convert-zipmap-hash-on-load 54 seconds - unit/dump 25 seconds - integration/replication-buffer 0 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/logging 1 seconds - integration/convert-ziplist-zset-on-load 20 seconds - integration/aof 14 seconds - integration/rdb 56 seconds - unit/type/list-2 55 seconds - unit/aofrw 18 seconds - integration/corrupt-dump 3 seconds - integration/valkey-benchmark 5 seconds - integration/failover 1 seconds - unit/pubsub 2 seconds - unit/pubsubshard 1 seconds - unit/slowlog 7 seconds - integration/dismiss-mem 68 seconds - unit/type/stream 5 seconds - unit/functions 20 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/limits 51 seconds - integration/replication-4 16 seconds - integration/psync2-master-restart 16 seconds - integration/psync2-pingoff 3 seconds - unit/bitfield 75 seconds - unit/type/set 22 seconds - integration/psync2-reg 8 seconds - unit/bitops 11 seconds - unit/introspection 2 seconds - unit/lazyfree 11 seconds - unit/introspection-2 0 seconds - unit/tls 1 seconds - unit/pause 0 seconds - unit/oom-score-adj 80 seconds - unit/type/list-3 1 seconds - unit/shutdown 3 seconds - unit/tracking 0 seconds - unit/violations 2 seconds - unit/networking 1 seconds - unit/replybufsize 27 seconds - integration/valkey-cli 83 seconds - unit/type/zset 6 seconds - unit/querybuf 3 seconds - unit/cluster/announced-endpoints 2 seconds - unit/cluster/scripting 13 seconds - unit/memefficiency 3 seconds - unit/cluster/multi-slot-operations 6 seconds - unit/cluster/misc 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 6 seconds - unit/cluster/human-announced-nodename 8 seconds - unit/cluster/hostnames 16 seconds - unit/cluster/cli 20 seconds - unit/client-eviction 48 seconds - integration/psync2 16 seconds - unit/cluster/links 43 seconds - unit/scripting 29 seconds - unit/wait 38 seconds - unit/obuf-limits 24 seconds - unit/cluster/failure-marking 98 seconds - unit/hyperloglog 163 seconds - integration/replication-psync 227 seconds - integration/replication 181 seconds - unit/geo 269 seconds - unit/maxmemory 0 seconds - list-large-memory 0 seconds - set-large-memory 1 seconds - bitops-large-memory 1 seconds - violations 3 seconds - defrag \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' >>> valkey: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' Hint: It's a good idea to run 'make test' ;) INSTALL valkey-server INSTALL valkey-benchmark INSTALL valkey-cli INSTALL SYMLINK redis-server -> valkey-server INSTALL SYMLINK redis-cli -> valkey-cli INSTALL SYMLINK redis-benchmark -> valkey-benchmark INSTALL SYMLINK redis-check-rdb -> valkey-check-rdb INSTALL SYMLINK redis-check-aof -> valkey-check-aof INSTALL SYMLINK redis-sentinel -> valkey-sentinel make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' >>> valkey-benchmark*: Running split function benchmark... 'usr/bin/valkey-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-benchmark/usr/bin/valkey-benchmark' >>> valkey-benchmark*: Preparing subpackage valkey-benchmark... >>> valkey-benchmark*: Stripping binaries >>> valkey-benchmark*: Running postcheck for valkey-benchmark >>> valkey-cli*: Running split function cli... 'usr/bin/valkey-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-cli/usr/bin/valkey-cli' >>> valkey-cli*: Preparing subpackage valkey-cli... >>> valkey-cli*: Stripping binaries >>> valkey-cli*: Running postcheck for valkey-cli >>> valkey-compat*: Running split function compat... 'usr/bin/redis-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-benchmark' 'usr/bin/redis-check-aof' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-aof' 'usr/bin/redis-check-rdb' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-rdb' 'usr/bin/redis-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-cli' 'usr/bin/redis-sentinel' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-sentinel' 'usr/bin/redis-server' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-server' >>> valkey-compat*: Preparing subpackage valkey-compat... >>> valkey-compat*: Script found. /bin/sh added as a dependency for valkey-compat-7.2.9-r1.apk >>> valkey-compat*: Adding .pre-install >>> valkey-compat*: Running postcheck for valkey-compat >>> valkey-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/init.d' >>> valkey-openrc*: Preparing subpackage valkey-openrc... >>> valkey-openrc*: Running postcheck for valkey-openrc >>> valkey*: Running postcheck for valkey >>> valkey*: Preparing package valkey... >>> valkey*: Stripping binaries >>> valkey*: Script found. /bin/sh added as a dependency for valkey-7.2.9-r1.apk >>> valkey*: Adding .pre-install >>> valkey*: Adding .post-install >>> valkey-benchmark*: Scanning shared objects >>> valkey-cli*: Scanning shared objects >>> valkey-compat*: Scanning shared objects >>> valkey-openrc*: Scanning shared objects >>> valkey*: Scanning shared objects >>> valkey-benchmark*: Tracing dependencies... so:libc.musl-riscv64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-benchmark*: Package size: 818.2 KB >>> valkey-benchmark*: Compressing data... >>> valkey-benchmark*: Create checksum... >>> valkey-benchmark*: Create valkey-benchmark-7.2.9-r1.apk >>> valkey-cli*: Tracing dependencies... so:libc.musl-riscv64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-cli*: Package size: 530.2 KB >>> valkey-cli*: Compressing data... >>> valkey-cli*: Create checksum... >>> valkey-cli*: Create valkey-cli-7.2.9-r1.apk >>> valkey-compat*: Tracing dependencies... !redis !redict-compat /bin/sh valkey-cli=7.2.9-r1 valkey=7.2.9-r1 >>> valkey-compat*: Package size: 1.0 B >>> valkey-compat*: Compressing data... >>> valkey-compat*: Create checksum... >>> valkey-compat*: Create valkey-compat-7.2.9-r1.apk >>> valkey-openrc*: Tracing dependencies... >>> valkey-openrc*: Package size: 2.3 KB >>> valkey-openrc*: Compressing data... >>> valkey-openrc*: Create checksum... >>> valkey-openrc*: Create valkey-openrc-7.2.9-r1.apk >>> valkey*: Tracing dependencies... /bin/sh so:libc.musl-riscv64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey*: Package size: 2.5 MB >>> valkey*: Compressing data... >>> valkey*: Create checksum... >>> valkey*: Create valkey-7.2.9-r1.apk >>> valkey: Build complete at Thu, 29 May 2025 22:00:08 +0000 elapsed time 0h 6m 58s >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Uninstalling dependencies... (1/8) Purging .makedepends-valkey (20250529.215311) (2/8) Purging linux-headers (6.6-r1) (3/8) Purging openssl-dev (3.3.3-r0) (4/8) Purging tcl (8.6.15-r0) (5/8) Purging tzdata (2025b-r0) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.37.0-r12.trigger OK: 335 MiB in 98 packages >>> valkey: Updating the main/riscv64 repository index... >>> valkey: Signing the index...