>>> valkey: Building main/valkey 7.2.9-r0 (using abuild 3.15.0_rc3-r1) started Thu, 08 May 2025 09:43:30 +0000 >>> valkey: Validating /home/buildozer/aports/main/valkey/APKBUILD... >>> valkey: Analyzing dependencies... >>> valkey: Installing for build: build-base linux-headers openssl-dev tcl procps (1/8) Installing linux-headers (6.14.2-r0) (2/8) Installing openssl-dev (3.5.0-r0) (3/8) Installing tzdata (2025b-r0) (4/8) Installing tcl (8.6.16-r0) (5/8) Installing libintl (0.24-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-valkey (20250508.094330) Executing busybox-1.37.0-r16.trigger OK: 286 MiB in 110 packages >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Cleaning up tmpdir >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.22/valkey-7.2.9.tar.gz Connecting to distfiles.alpinelinux.org (172.105.82.32:443) saving to '/var/cache/distfiles/v3.22/valkey-7.2.9.tar.gz.part' valkey-7.2.9.tar.gz. 100% |********************************| 3355k 0:00:00 ETA '/var/cache/distfiles/v3.22/valkey-7.2.9.tar.gz.part' saved >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.22/valkey-7.2.9.tar.gz >>> valkey: Checking sha512sums... valkey-7.2.9.tar.gz: OK valkey.conf.patch: OK sentinel.conf.patch: OK valkey.initd: OK valkey.confd: OK valkey-sentinel.initd: OK valkey-sentinel.confd: OK >>> valkey: Unpacking /var/cache/distfiles/v3.22/valkey-7.2.9.tar.gz... >>> valkey: valkey.conf.patch patching file valkey.conf >>> valkey: sentinel.conf.patch patching file sentinel.conf cd src && make all make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' CC Makefile.dep rm -rf valkey-server valkey-sentinel valkey-cli valkey-benchmark valkey-check-rdb valkey-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d valkey-check-rdb.d valkey-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d valkey-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d valkey-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo SERVER_CFLAGS=-flto=auto >> .make-settings echo SERVER_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredis MAKE linenoise cd hiredis && make static USE_SSL=1 MAKE lua cd linenoise && make MAKE hdr_histogram cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hiredis' MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/linenoise' cc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hdr_histogram' cc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/lua/src' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/fpconv' cc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c cc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/linenoise' ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a cc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm cc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC db.o CC replication.o CC object.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC valkey-check-rdb.o CC valkey-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o valkey-check-aof.c: In function 'processAnnotations': valkey-check-aof.c:194:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 194 | printf("AOF %s has nothing before timestamp %ld, " | ~~^ | | | long int | %lld 195 | "aborting...\n", filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC call_reply.o valkey-check-aof.c:199:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 199 | printf("Failed to truncate AOF %s to timestamp %ld to offset %ld because it is not the last file.\n", | ~~^ | | | long int | %lld 200 | filename, to_timestamp, (long int)epos); | ~~~~~~~~~~~~ | | | time_t {aka long long int} valkey-check-aof.c:207:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 207 | printf("Failed to truncate AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 208 | filename, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} valkey-check-aof.c: In function 'checkSingleAof': valkey-check-aof.c:295:59: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 295 | printf("Truncate nothing in AOF %s to timestamp %ld\n", aof_filename, to_timestamp); | ~~^ ~~~~~~~~~~~~ | | | | long int time_t {aka long long int} | %lld valkey-check-aof.c: In function 'printAofStyle': valkey-check-aof.c:446:62: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Wformat=] 446 | printf("Successfully truncated AOF %s to timestamp %ld\n", | ~~^ | | | long int | %lld 447 | aofFileName, to_timestamp); | ~~~~~~~~~~~~ | | | time_t {aka long long int} CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC valkey-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC valkey-benchmark.o LINK valkey-benchmark LINK valkey-cli LINK valkey-server INSTALL valkey-sentinel INSTALL valkey-check-rdb INSTALL valkey-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 24207 Testing unit/printver [ready]: 24206 Testing unit/dump [ready]: 24208 Testing unit/auth [ready]: 24209 Testing unit/protocol [ready]: 24210 Testing unit/keyspace [ready]: 24211 Testing unit/scan [ready]: 24212 Testing unit/info [ready]: 24213 Testing unit/info-command [ready]: 24214 Testing unit/type/string [ready]: 24216 Testing unit/type/incr [ready]: 24215 Testing unit/type/list [ready]: 24217 Testing unit/type/list-2 [ready]: 24218 Testing unit/type/list-3 [ready]: 24219 Testing unit/type/set [ready]: 24220 Testing unit/type/zset [ready]: 24221 Testing unit/type/hash Testing Redis version 7.2.4 (00000000) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (0 ms) [ok]: SET and GET an item (0 ms) [ok]: DEL against a single item (1 ms) [ok]: SET and GET an empty item (0 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (1 ms) [ok]: Explicit regression for a list bug (1 ms) [ok]: Vararg DEL (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: INCR against non existing key (0 ms) [ok]: KEYS to get all keys (0 ms) [ok]: DBSIZE (0 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: RESTORE with ABSTTL in the past (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: AUTH fails if there is no password configured server side (1 ms) [ok]: DECR against key is not exist and incr (0 ms) [ok]: DEL all keys (0 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: INCR against key originally set with SET (1 ms) [ok]: INCR over 32bit value (0 ms) [ok]: Arity check for auth command (1 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: Check encoding - listpack (0 ms) [ok]: RESTORE can set LFU (0 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (1 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: reg node check compression with insert and pop (1 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: reg node check compression combined with trim (1 ms) [ok]: ZADD XX existing key - listpack (1 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: reg node check compression with lset (0 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: INCR can modify objects in-place (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: INCRBYFLOAT against non existing key (1 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: plain node check compression (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: plain node check compression using lset (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: No negative zero (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: decr operation should update encoding from raw to int (0 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: HRANDFIELD - listpack (5 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (1 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (0 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: ZRANGE basics - listpack (1 ms) [ok]: ZREVRANGE basics - listpack (1 ms) [ok]: HRANDFIELD - hashtable (5 ms) [ok]: HRANDFIELD with RESP3 (0 ms) [ok]: info command with at most one sub command (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: ZRANK/ZREVRANK basics - listpack (1 ms) [ok]: info command with one sub-section (1 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: info command with multiple sub-sections (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (17 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (2 ms) [ok]: ZLEXCOUNT advanced - listpack (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (8 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: SMISMEMBER requires one or more members (0 ms) [ok]: SADD against non set (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (6 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (3 ms) [ok]: SADD a non-integer against a large intset (7 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: Handle an empty query (41 ms) [ok]: ZREMRANGEBYLEX basics - listpack (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (0 ms) [ok]: SADD an integer larger than 64 bits to a large intset (6 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (0 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (0 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: SCAN basic (52 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: Very big payload in GET/SET (54 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (24 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (6 ms) [ok]: Negative multibulk length (43 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (0 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (1 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (91 ms) [ok]: DUMP of non existing key returns nil (0 ms) [1/91 done]: unit/type/incr (0 seconds) Testing unit/type/stream [2/91 done]: unit/printver (0 seconds) Testing unit/type/stream-cgroups [3/91 done]: unit/info-command (0 seconds) Testing unit/sort [ok]: HRANDFIELD with - hashtable (91 ms) [ok]: SCAN COUNT (58 ms) [ok]: latencystats: disable/enable (1 ms) [ok]: latencystats: configure percentiles (2 ms) [ok]: latencystats: bad configure percentiles (1 ms) [ok]: Protocol desync regression test #1 (33 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (46 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: latencystats: blocking commands (2 ms) [ok]: latencystats: subcommands (1 ms) [ok]: Regression for quicklist #3343 bug (143 ms) [ok]: Protocol desync regression test #2 (34 ms) [ok]: SCAN MATCH (46 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (43 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (0 ms) [ok]: Variadic SADD (1 ms) [ok]: latencystats: measure latency (51 ms) [ok]: errorstats: failed call authentication error (2 ms) [ok]: errorstats: failed call within MULTI/EXEC (2 ms) [ok]: errorstats: failed call within LUA (1 ms) [ok]: errorstats: failed call NOSCRIPT error (1 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: errorstats: rejected call by OOM error (2 ms) [ok]: Protocol desync regression test #3 (33 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: errorstats: rejected call by authorization error (1 ms) [ok]: RESP3 attributes (0 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: errorstats: blocking commands (1 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: HRANDFIELD with - listpack (88 ms) [ok]: Check compression with recompress (60 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: XADD IDs are incremental (0 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XADD IDs correctly report an error when overflowing (1 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: AUTH fails when a wrong password is given (1 ms) [ok]: XPENDING only group (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: test large number of args (30 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: For unauthenticated clients output buffer is limited (0 ms) [ok]: For once authenticated clients output buffer is NOT limited (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: SCAN TYPE (70 ms) [ok]: Test LPUSH and LPOP on plain nodes (12 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: XPENDING with IDLE (20 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (0 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: Set encoding after DEBUG RELOAD (80 ms) [ok]: SREM basics - $type (1 ms) [ok]: SREM basics - $type (7 ms) [ok]: SREM basics - intset (0 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (1 ms) [ok]: SINTERCARD with illegal arguments (0 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: HSET/HLEN - Big hash creation (70 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (0 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (32 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (0 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (1 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: SCAN unknown type (48 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (1 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: XADD with MAXLEN option (68 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (11 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: SUNION with two sets - regular (5 ms) [ok]: SUNIONSTORE with two sets - regular (5 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (26 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (2 ms) [ok]: SUNION with non existing keys - regular (5 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (3 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: MIGRATE is caching connections (221 ms) [ok]: HGET against the big hash (49 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (1 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (4 ms) [ok]: Test LSET with packed / plain combinations (90 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: SCAN with expired keys (54 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (2 ms) [ok]: XADD with MAXLEN option and the '=' argument (68 ms) [ok]: SUNION with two sets - intset (5 ms) [ok]: SUNIONSTORE with two sets - intset (5 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: HMSET - big hash (50 ms) [ok]: SDIFF with three sets - intset (1 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: Quicklist: SORT BY key (8 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (14 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: Quicklist: SORT BY hash field (9 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: SCAN with expired keys with TYPE filter (54 ms) [ok]: SSCAN with encoding intset (1 ms) [ok]: SSCAN with encoding listpack (1 ms) [ok]: SSCAN with encoding hashtable (3 ms) [ok]: HSCAN with encoding listpack (1 ms) [ok]: XADD with MAXLEN option and the '~' argument (55 ms) [ok]: XADD with NOMKSTREAM option (0 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: HMGET - big hash (51 ms) [ok]: HKEYS - small hash (0 ms) [ok]: Crash due to wrongly recompress after lrem (226 ms) [ok]: HKEYS - big hash (8 ms) [ok]: HVALS - small hash (0 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: HVALS - big hash (1 ms) [ok]: HGETALL - small hash (1 ms) [ok]: HGETALL - big hash (19 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HSCAN with encoding hashtable (65 ms) [ok]: HINCRBY against non existing hash key (1 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: ZSCAN with encoding listpack (2 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: XADD with MINID option (68 ms) [ok]: XTRIM with MINID option (0 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (60 ms) [ok]: Test LSET with packed consist only one item (176 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: HSTRLEN against the big hash (50 ms) [ok]: HSTRLEN against non existing field (1 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (2 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: ZSCAN with encoding skiplist (70 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (43 ms) [ok]: Hash fuzzing #1 - 10 fields (21 ms) [ok]: SCAN guarantees check under write load (14 ms) [ok]: SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: SSCAN with PATTERN (0 ms) [ok]: HSCAN with PATTERN (1 ms) [ok]: ZSCAN with PATTERN (0 ms) [ok]: Hash fuzzing #2 - 10 fields (14 ms) [ok]: EXPIRE - set timeouts multiple times (0 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: LPOS basic usage - quicklist (41 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (88 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (43 ms) [ok]: LPOS basic usage - listpack (1 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (1 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (1 ms) [ok]: BLPOP: single existing list - quicklist (43 ms) [ok]: BLPOP: multiple existing lists - quicklist (103 ms) [ok]: ZSCAN scores: regression test for issue #2175 (430 ms) [ok]: BLPOP: second list has an entry - quicklist (43 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (60 ms) [ok]: DEL against expired key (1100 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (0 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (0 ms) [ok]: RENAMENX basic usage (0 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (0 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (0 ms) [ok]: COPY for string does not copy data to no-integer DB (1 ms) [ok]: COPY can copy key expire metadata as well (3 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (87 ms) [ok]: COPY basic usage for list - quicklist (47 ms) [ok]: COPY basic usage for list - listpack (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (11 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (7 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: COPY basic usage for hashtable hash (11 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: BRPOPLPUSH - quicklist (43 ms) [ok]: COPY basic usage for stream (80 ms) [ok]: COPY basic usage for stream-cgroups (6 ms) [ok]: MOVE basic usage (0 ms) [ok]: MOVE against key existing in the target DB (1 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (0 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: BLMOVE left left - quicklist (43 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (5 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Regression for pattern matching very long nested loops (3 ms) [5/91 done]: unit/keyspace (2 seconds) Testing unit/other [ok]: BLMOVE left right - quicklist (43 ms) [ok]: BLMOVE right left - quicklist (43 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1096 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (2 ms) [ok]: BLMOVE right right - quicklist (43 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: BLPOP: multiple existing lists - listpack (1 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (0 ms) [ok]: BRPOPLPUSH - listpack (1 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: Coverage: HELP commands (2 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: Coverage: MEMORY MALLOC-STATS (0 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: SAVE - make sure there are all the types as values (12 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (0 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (0 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: BLMPOP with multiple blocked clients (2 ms) [ok]: Linked LMOVEs (1 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (0 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: MASTERAUTH test with binary password (926 ms) [ok]: Hash fuzzing #1 - 512 fields (960 ms) [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (0 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: FUZZ stresser with data model binary (426 ms) [ok]: EXEC fail on lazy expired WATCHed key (112 ms) [ok]: WATCH stale keys should not fail EXEC (2 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (2 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (0 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (0 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (0 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (2 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (0 ms) [ok]: stats: instantaneous metrics (1612 ms) [ok]: XCLAIM can claim PEL items from another consumer (602 ms) [ok]: stats: debug metrics (123 ms) [ok]: XADD mass insertion and XLEN (1588 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: Very big payload random access (2057 ms) [ok]: Hash fuzzing #2 - 512 fields (620 ms) [7/91 done]: unit/info (2 seconds) Testing unit/quit [ok]: QUIT returns OK (1 ms) [ok]: Pipelined commands after QUIT must not be executed (0 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: Big Quicklist: SORT BY key (452 ms) [ok]: FUZZ stresser with data model alpha (489 ms) [ok]: Big Quicklist: SORT BY key with limit (12 ms) [ok]: XRANGE can be used to iterate the whole stream (315 ms) [8/91 done]: unit/quit (1 seconds) Testing unit/aofrw [ok]: XCLAIM without JUSTID increments delivery count (403 ms) [ok]: BRPOPLPUSH timeout (1015 ms) [ok]: SWAPDB awakes blocked client (0 ms) [ok]: XCLAIM same consumer (201 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (171 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (1 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: FUZZ stresser with data model compr (425 ms) [ok]: Big Quicklist: SORT BY hash field (433 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (1 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (22 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (322 ms) [ok]: Hash table: SORT BY key (10 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: SDIFF fuzzing (2589 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (0 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: Hash table: SORT BY hash field (10 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SPOP with =1 - listpack (0 ms) [ok]: ZDIFF fuzzing - listpack (2936 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: SRANDMEMBER - listpack (4 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: SRANDMEMBER - intset (6 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: SPOP with - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: SPOP with - intset (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (0 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (1 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: SPOP new implementation: code path #1 intset (1 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: WATCH will consider touched expired keys (1105 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: SPOP new implementation: code path #3 intset (2 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: SPOP new implementation: code path #2 listpack (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: SPOP new implementation: code path #3 listpack (2 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (1 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (2 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (1 ms) [ok]: ZINCRBY - increment and decrement - skiplist (0 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (7 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (3 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (910 ms) [ok]: BGSAVE (53 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (8 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (0 ms) [ok]: ZUNIONSTORE basics - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: MULTI / EXEC is not propagated (single write command) (48 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (1 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (953 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: SETNX target key exists (1 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (86 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (1 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (15 ms) [ok]: SRANDMEMBER with - intset (16 ms) [ok]: Hash ziplist of various encodings (90 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: SRANDMEMBER with - hashtable (13 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (100 ms) [ok]: SRANDMEMBER histogram distribution - listpack (54 ms) [9/91 done]: unit/type/hash (3 seconds) Testing unit/acl [ok]: XAUTOCLAIM can claim PEL items from another consumer (602 ms) [ok]: SRANDMEMBER histogram distribution - intset (56 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (100 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (59 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (0 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (0 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any pattern (0 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (0 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (0 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (1 ms) [ok]: ACLs can include or exclude whole classes of commands (0 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (0 ms) [ok]: ACLs can block all DEBUG subcommands except one (0 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (2 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (0 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: ACL GETUSER provides reasonable results (10 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: ACL GETUSER provides correct results (3 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (1 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (1 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (3 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (0 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (0 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (1 ms) [ok]: ACL LOG can log failed auth attempts (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (1 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (0 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (0 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (1 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (3 ms) [ok]: ACL-Metrics invalid command accesses (2 ms) [ok]: ACL-Metrics invalid key accesses (2 ms) [ok]: ACL-Metrics invalid channels accesses (2 ms) [ok]: XAUTOCLAIM as an iterator (203 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XAUTOCLAIM with XDEL (0 ms) [ok]: XAUTOCLAIM with XDEL and count (0 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (0 ms) [ok]: XINFO FULL output (3 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (100 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (0 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL load and save (2 ms) [ok]: ACL load and save with restricted channels (1 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: Check consistency of different data types after a reload (530 ms) [ok]: Consumer seen-time and active-time (203 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: MULTI / EXEC with REPLICAOF (101 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: XREADGROUP with NOACK creates consumer (4 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: Same dataset digest if saving/reloading as AOF? (194 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (54 ms) [ok]: SETEX - Wait for the key to expire (1101 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (0 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1482 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (106 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (1 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (6 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1006 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (1 ms) [ok]: Only default user has access to all channels irrespective of flag (0 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: Consumer group lag with XDELs (6 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (0 ms) [ok]: Consumer group lag with XTRIM (7 ms) [ok]: Consumer group lag with XADD trimming (6 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: MULTI and script timeout (402 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (103 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (103 ms) [ok]: default: load from config file with all channels permissions (0 ms) [ok]: EXEC and script timeout (403 ms) [ok]: Test loading an ACL file with duplicate users (2 ms) [ok]: Test loading an ACL file with duplicate default user (2 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (103 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (3 ms) [ok]: Test loading duplicate users in config on startup (11 ms) [ok]: XREAD with non empty second stream (773 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: Blocking XREAD will not reply with an empty array (111 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (101 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (1 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (1 ms) [ok]: MULTI-EXEC body and script timeout (402 ms) [ok]: Big Hash table: SORT BY key (428 ms) [ok]: Big Hash table: SORT BY key with limit (14 ms) [ok]: EXPIRE precision is now the millisecond (1102 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (103 ms) [ok]: ACL from config file and config rewrite (204 ms) [ok]: PSETEX can set sub-second expires (102 ms) [10/91 done]: unit/acl (2 seconds) Testing unit/acl-v2 [ok]: BLPOP: timeout (1073 ms) [ok]: BLPOP: arguments are empty (1 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (0 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BRPOP: second argument is not a list (1 ms) [11/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/latency-monitor [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (0 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (1 ms) [ok]: Test separate read permission (0 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: Validate read and write permissions format - empty permission (0 ms) [ok]: Validate read and write permissions format - empty selector (0 ms) [ok]: Validate read and write permissions format - empty pattern (0 ms) [ok]: Validate read and write permissions format - no pattern (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (0 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (0 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (0 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (2 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (0 ms) [ok]: Cardinality commands require some type of permission to execute (1 ms) [ok]: Test sharded channel permissions (0 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: LATENCY HISTOGRAM with empty histogram (0 ms) [ok]: LATENCY HISTOGRAM all commands (1 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: just EXEC and script timeout (402 ms) [ok]: exec with write commands and state change (1 ms) [ok]: exec with read commands and stale replica state change (5 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (0 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: Big Hash table: SORT BY hash field (422 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (2 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (0 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (0 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: MULTI propagation of PUBLISH (93 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (8 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (1 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Test behavior of loading ACLs (0 ms) [ok]: SORT speed, 100 element list BY key, 100 times (17 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (20 ms) [ok]: LTRIM stress testing - quicklist (5453 ms) [ok]: SORT speed, 100 element list directly, 100 times (13 ms) [ok]: SORT speed, 100 element list BY , 100 times (11 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [12/91 done]: unit/acl-v2 (1 seconds) Testing integration/block-repl [13/91 done]: unit/sort (6 seconds) Testing integration/replication [ok]: MULTI propagation of EVAL (100 ms) [ok]: SETNX against expired volatile key (2506 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: GETDEL propagate as DEL command to replica (25 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: GETEX without argument does not propagate to replica (100 ms) [ok]: MGET (8 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (1 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (1 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (1 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: ZDIFF fuzzing - skiplist (2748 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (1 ms) [ok]: ZMPOP propagate as pop with count command to replica (71 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2104 ms) [ok]: Redis should actively expire keys incrementally (602 ms) [ok]: MULTI with BGREWRITEAOF (203 ms) [ok]: SETBIT fuzzing (323 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (0 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (1 ms) [ok]: GETRANGE against string value (0 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (199 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: BRPOP: timeout (1077 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (0 ms) [ok]: MULTI with config set appendonly (203 ms) [ok]: MULTI with config error (0 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: XDEL fuzz test (1332 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (0 ms) [ok]: BZMPOP readraw in RESP3 (199 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: MULTI with FLUSHALL and AOF (12 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (199 ms) [ok]: ZMPOP readraw in RESP2 (1 ms) [14/91 done]: unit/multi (5 seconds) Testing integration/replication-2 [ok]: SCAN regression test for issue #4906 (5687 ms) [ok]: BZMPOP readraw in RESP2 (199 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (1 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: First server should have role slave after SLAVEOF (1002 ms) [15/91 done]: unit/scan (7 seconds) Testing integration/replication-3 [ok]: GETRANGE fuzzing (763 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (1 ms) [ok]: ZUNIONSTORE result is sorted (117 ms) [ok]: Extended SET GET option (0 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (0 ms) [ok]: ZSCORE - listpack (18 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (1 ms) [ok]: ZMSCORE - listpack (17 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (945 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (0 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (29 ms) [ok]: ZSET sorting stresser - listpack (25 ms) [16/91 done]: unit/type/string (7 seconds) Testing integration/replication-4 [ok]: Redis should lazy expire keys (1002 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: APPEND fuzzing (183 ms) [ok]: FLUSHDB (59 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (6 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (0 ms) [ok]: RESET clears and discards MULTI state (1 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: BLMPOP_LEFT: timeout (1076 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (0 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (23 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (0 ms) [ok]: Don't rehash if redis has child process (416 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (0 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: Process title set as expected (0 ms) [17/91 done]: unit/other (6 seconds) Testing integration/replication-psync [ok]: BLMPOP_RIGHT: timeout (1064 ms) [ok]: BLMPOP_RIGHT: arguments are empty (1 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (7 ms) [ok]: BLMPOP propagate as pop with count command to replica (199 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1670 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (43 ms) [ok]: Test latency events logging (3402 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: LINSERT - quicklist (43 ms) [ok]: LPUSHX, RPUSHX - listpack (0 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (47 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (156 ms) [ok]: LINDEX random access - listpack (33 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (67 ms) [ok]: LINDEX consistency test - listpack (82 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: LINDEX random access - listpack (54 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (234 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (22 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (109 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (8551 ms) [ok]: LINDEX consistency test - quicklist (38 ms) [ok]: LINDEX random access - quicklist (26 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (53 ms) [ok]: LINDEX consistency test - quicklist (76 ms) [ok]: LINDEX random access - quicklist (53 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (105 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (1 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (44 ms) [ok]: LMOVE left left base case - quicklist (43 ms) [ok]: LMOVE left right base case - quicklist (43 ms) [ok]: LMOVE right left base case - quicklist (43 ms) [ok]: LMOVE right right base case - quicklist (43 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (657 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2819 ms) [ok]: min-slaves-to-write is ignored by slaves (0 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (44 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (102 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (43 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (86 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (86 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2017 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (87 ms) [ok]: MASTER and SLAVE consistency with expire (3144 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (86 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (24 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (57 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (86 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (44 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (43 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (4 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (43 ms) [ok]: RPOPLPUSH base case - listpack (0 ms) [ok]: LMOVE left left base case - listpack (0 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (0 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (44 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (44 ms) [ok]: SRANDMEMBER with a dict containing long chain (7354 ms) [ok]: SMOVE basics - from regular set to intset (2 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (0 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (300 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (46 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (44 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (0 ms) [ok]: LMOVE left left with listpack source and existing target listpack (1 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (0 ms) [ok]: RPOPLPUSH against non existing key (1 ms) [ok]: RPOPLPUSH against non list src key (0 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (42 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (86 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (1 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Mass RPOP/LPOP - listpack (25 ms) [ok]: Mass RPOP/LPOP - listpack (50 ms) [ok]: LMPOP with illegal argument (1 ms) [ok]: LMPOP single existing list - quicklist (135 ms) [ok]: LMPOP multiple existing lists - quicklist (180 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: LMPOP multiple existing lists - listpack (2 ms) [ok]: LMPOP propagate as pop with count command to replica (35 ms) [ok]: LTRIM stress testing - listpack (5875 ms) [ok]: LRANGE basics - quicklist (45 ms) [ok]: LRANGE inverted indexes - quicklist (46 ms) [18/91 done]: unit/type/list-2 (12 seconds) Testing integration/replication-buffer [ok]: LRANGE out of range indexes including the full list - quicklist (47 ms) [ok]: LRANGE out of range negative end index - quicklist (43 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (0 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (0 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1023 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (5 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: intsets implementation stress testing (1197 ms) [19/91 done]: unit/type/set (12 seconds) Testing integration/shutdown [ok]: LTRIM basics - quicklist (543 ms) [ok]: LTRIM out of range negative end index - quicklist (86 ms) [ok]: LSET - quicklist (44 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (6 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (0 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (42 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (42 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (1 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (42 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (0 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (3 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (2 ms) [ok]: Test replication with parallel clients writing in different DBs (5244 ms) [ok]: List listpack -> quicklist encoding conversion (177 ms) [ok]: List quicklist -> listpack encoding conversion (216 ms) [ok]: List encoding conversion when RDB loading (20 ms) [ok]: List invalid list-max-listpack-size config (46 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2004 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: List of various encodings (47 ms) [ok]: ZSCORE - skiplist (15 ms) [ok]: List of various encodings - sanitize dump (2 ms) [ok]: Unblock fairness is kept while pipelining (1 ms) [ok]: Unblock fairness is kept during nested unblock (2 ms) [ok]: Blocking command accounted only once in commandstats (1 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: ZMSCORE - skiplist (15 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (20 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (81 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (1 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (1 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: ZSET sorting stresser - skiplist (25 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (98 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (0 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: Redis should not propagate the read command on lazy expire (96 ms) [20/91 done]: unit/type/list (13 seconds) Testing integration/aof [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (4388 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [21/91 done]: unit/latency-monitor (8 seconds) Testing integration/aof-race [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (0 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [22/91 done]: unit/expire (12 seconds) Testing integration/aof-multi-part [ok]: Multi Part AOF can't load data when some file missing (108 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (107 ms) [ok]: Bad format: Server should have logged an error (1 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (108 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (107 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (7 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (5 ms) [ok]: Short read: Utility should be able to fix the AOF (16 ms) [ok]: Fixed AOF: Server should have been started (7 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1869 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (15 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (118 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (111 ms) [23/91 done]: integration/aof-race (1 seconds) Testing integration/rdb [ok]: All replicas share one global replication buffer (168 ms) [ok]: Replication buffer will become smaller when no replica uses (6 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (109 ms) [ok]: test old version rdb file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (113 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (109 ms) [ok]: AOF+EXPIRE: Server should have been started (0 ms) [ok]: AOF+EXPIRE: List should be empty (1 ms) [ok]: RDB encoding loading test (5 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (110 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (0 ms) [ok]: Multi Part AOF can start when no aof and no manifest (120 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1652 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (119 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (128 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (120 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (174 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (13 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (123 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (5303 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (122 ms) [ok]: Test RDB stream encoding (62 ms) [ok]: Test RDB stream encoding - sanitize dump (6 ms) [ok]: Server should not start if RDB file can't be open (0 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (217 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6405 ms) [ok]: MIGRATE cached connections are released after some time (15002 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (490 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (0 ms) [24/91 done]: integration/replication-2 (9 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (342 ms) [ok]: MIGRATE is able to migrate a key between two instances (235 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (1828 ms) [ok]: corrupt payload: #7445 - with sanitize (235 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (134 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2761 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: Test FLUSHALL aborts bgsave (407 ms) [ok]: XRANGE fuzzing (9612 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (0 ms) [ok]: MIGRATE is able to copy a key between two instances (258 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: XTRIM with MAXLEN option basic test (71 ms) [ok]: bgsave resets the change counter (102 ms) [ok]: XADD with LIMIT consecutive calls (8 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (226 ms) [ok]: XTRIM with ~ is limited (10 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (226 ms) [ok]: XTRIM without ~ is not limited (8 ms) [ok]: XTRIM without ~ and with LIMIT (7 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (0 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (112 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (219 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (7 ms) [ok]: corrupt payload: invalid zlbytes header (215 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Slave is able to evict keys created in writable slaves (6002 ms) [ok]: Set instance A as slave of B (101 ms) [ok]: INCRBYFLOAT replication, should not remove expire (1 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (1 ms) [ok]: MIGRATE propagates TTL correctly (215 ms) [ok]: XADD with MINID > lastid can propagate correctly (7 ms) [ok]: corrupt payload: valid zipped hash header, dup records (215 ms) [ok]: Writable replica doesn't return expired keys (103 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (105 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1008 ms) [ok]: BZPOPMIN with same key multiple times should work (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (0 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (101 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (104 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1259 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (7 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (13851 ms) [ok]: corrupt payload: quicklist big ziplist prev len (215 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (627 ms) [ok]: Replication of an expired key does not delete the expired key (510 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (8 ms) [ok]: corrupt payload: quicklist small ziplist prev len (225 ms) [ok]: Detect write load to master (1001 ms) [25/91 done]: integration/replication-3 (10 seconds) Testing integration/corrupt-dump-fuzzer [ok]: client freed during loading (947 ms) [ok]: XADD with ~ MINID can propagate correctly (8 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (317 ms) [ok]: corrupt payload: quicklist ziplist wrong count (230 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (125 ms) [ok]: First server should have role slave after SLAVEOF (0 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (7 ms) [ok]: corrupt payload: #3080 - quicklist (214 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (124 ms) [ok]: BRPOPLPUSH replication, list exists (1002 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8263 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1001 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (0 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (8 ms) [ok]: corrupt payload: quicklist with empty ziplist (215 ms) [ok]: Test RDB load info (516 ms) [ok]: Shutting down master waits for replica timeout (1939 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (0 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (224 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: AOF enable will create manifest file (526 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (214 ms) [ok]: corrupt payload: #3080 - ziplist (215 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1601 ms) [ok]: Empty stream can be rewrite into AOF correctly (103 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (108 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (103 ms) [ok]: BLMOVE (left, left) replication, list exists (1002 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: BZPOP/BZMPOP against wrong type (1 ms) [ok]: BZMPOP with illegal argument (1 ms) [ok]: BZMPOP with multiple blocked clients (3 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (220 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (360 ms) [26/91 done]: unit/type/stream (19 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: BZMPOP propagate as pop with count command to replica (191 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (1 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (220 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: Shutting down master waits for replica then fails (1242 ms) [ok]: corrupt payload: listpack invalid size header (225 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: listpack too long entry len (121 ms) [ok]: corrupt payload: listpack very long entry len (120 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms) [27/91 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: ZSET skiplist order consistency when elements are moved (642 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (1 ms) [ok]: ZRANGESTORE BYSCORE (0 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (1 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (1 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (6 ms) [ok]: ZRANDMEMBER - skiplist (7 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: BLMOVE (left, right) replication, list exists (1002 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (1 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1424 ms) [ok]: corrupt payload: listpack too long entry prev len (215 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (0 ms) [ok]: Shutting down master waits for replica then aborted (528 ms) [ok]: ZRANDMEMBER with - skiplist (206 ms) [ok]: corrupt payload: stream with duplicate consumers (215 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: ZRANDMEMBER with - listpack (162 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (9 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (3 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (0 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [28/91 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: Test child sending info (1935 ms) [29/91 done]: unit/type/zset (20 seconds) Testing integration/logging [ok]: corrupt payload: hash ziplist with duplicate records (213 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: Crash report generated on SIGABRT (2 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (515 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: Shutting down primary wait for replica after previous block (524 ms) [30/91 done]: integration/shutdown (8 seconds) Testing integration/psync2 [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [31/91 done]: integration/logging (0 seconds) Testing integration/psync2-reg [ok]: corrupt payload: hash listpack with duplicate records (215 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: AOF fsync always barrier issue (5345 ms) [ok]: AOF enable/disable auto gc (233 ms) [32/91 done]: integration/convert-ziplist-zset-on-load (0 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: hash listpack with duplicate records - convert (122 ms) [ok]: AOF can produce consecutive sequence number after reload (138 ms) [ok]: GETEX should not append to AOF (1 ms) [ok]: BLMOVE (right, left) replication, list exists (1002 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (2 ms) [ok]: failed bgsave prevents writes (218 ms) [ok]: corrupt payload: hash ziplist uneven record count (213 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [33/91 done]: integration/rdb (7 seconds) Testing integration/psync2-master-restart [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (1 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (304 ms) [ok]: corrupt payload: hash duplicate records (215 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (101 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [ok]: corrupt payload: hash empty zipmap (214 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (120 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (101 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (121 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (0 ms) [ok]: AOF will trigger limit when AOFRW fails many times (606 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (214 ms) [ok]: BLMOVE (right, right) replication, list exists (1002 ms) [ok]: PSYNC2 #3899 regression: setup (1003 ms) [ok]: PSYNC2 pingoff: setup (1002 ms) [ok]: PSYNC2 pingoff: write and wait replication (0 ms) [ok]: Generate timestamp annotations in AOF (319 ms) [ok]: MIGRATE can correctly transfer large values (5105 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (214 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: BLPOP followed by role change, issue #2473 (204 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (112 ms) [ok]: MIGRATE can correctly transfer hashes (214 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (214 ms) [ok]: corrupt payload: fuzzer findings - hash crash (213 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3129 ms) [ok]: Truncate AOF to specific timestamp (385 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (0 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (0 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (214 ms) [ok]: FLUSHDB / FLUSHALL should replicate (94 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: MIGRATE timeout actually works (631 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (213 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: MIGRATE can migrate multiple keys at once (215 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (214 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (214 ms) [ok]: corrupt payload: fuzzer findings - empty intset (213 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (214 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (213 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1122 ms) [34/91 done]: integration/replication-buffer (11 seconds) Testing integration/failover [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1115 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (214 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (214 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (215 ms) [35/91 done]: unit/dump (24 seconds) Testing integration/valkey-cli [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (214 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: setup replication for following tests (101 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (213 ms) [ok]: Interactive CLI: Status reply (61 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: Interactive CLI: Bulk reply (60 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2500 ms) [ok]: Interactive CLI: Multi-bulk reply (60 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (213 ms) [36/91 done]: integration/aof-multi-part (11 seconds) Testing integration/valkey-benchmark [ok]: corrupt payload: fuzzer findings - stream bad lp_count (213 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (120 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (2236 ms) [ok]: benchmark: set,get (4 ms) [ok]: benchmark: connecting using URI set,get (4 ms) [ok]: benchmark: connecting using URI with authentication set,get (4 ms) [ok]: Interactive CLI: Parsing quotes (423 ms) [ok]: benchmark: full test suite (64 ms) [ok]: failover command to specific replica works (818 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (214 ms) [ok]: EVAL can process writes from AOF in read-only replicas (231 ms) [ok]: Test valkey-check-aof for old style resp AOF (6 ms) [ok]: Test valkey-check-aof for old style resp AOF - has data in the same format as manifest (5 ms) [ok]: Test valkey-check-aof for old style rdb-preamble AOF (6 ms) [ok]: Test valkey-check-aof for Multi Part AOF with resp AOF base (5 ms) [ok]: Test valkey-check-aof for Multi Part AOF with rdb-preamble AOF base (6 ms) [ok]: Test valkey-check-aof for Multi Part AOF contains a format error (6 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in fix mode (10 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (5 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (121 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (6 ms) [37/91 done]: integration/aof (12 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (214 ms) [ok]: benchmark: multi-thread set,get (508 ms) [ok]: Interactive CLI: Subscribed mode (605 ms) [ok]: benchmark: pipelined full set,get (87 ms) [ok]: benchmark: arbitrary command (5 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1735 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7910 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (215 ms) [ok]: benchmark: keyspace length (78 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (2 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (7540 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (121 ms) [38/91 done]: integration/valkey-benchmark (1 seconds) Testing unit/pubsub [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (1 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (0 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (0 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: PUBLISH/PSUBSCRIBE basics (1 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: failover command to any replica works (919 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (412 ms) [ok]: Non-interactive TTY CLI: Status reply (1 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (216 ms) [ok]: Non-interactive TTY CLI: Integer reply (1 ms) [ok]: Non-interactive TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (5 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (14 ms) [ok]: PubSub messages with CLIENT REPLY OFF (85 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: Non-interactive non-TTY CLI: Status reply (1 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (0 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (2 ms) [ok]: Keyspace notifications: we receive keyspace notifications (40 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (53 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (1 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (5 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (8 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (3 ms) [ok]: Keyspace notifications: we receive keyevent notifications (45 ms) [ok]: Keyspace notifications: we can receive both kind of events (0 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (8 ms) [ok]: Keyspace notifications: list events test (2 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (0 ms) [ok]: Keyspace notifications: hash events test (0 ms) [ok]: Keyspace notifications: stream events test (2 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (215 ms) [ok]: Keyspace notifications: expired events (triggered expire) (101 ms) [ok]: failover to a replica with force works (418 ms) [ok]: Keyspace notifications: expired events (background expire) (200 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (0 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (215 ms) [ok]: Keyspace notifications: new key test (0 ms) [ok]: publish to self inside multi (1 ms) [ok]: publish to self inside script (0 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [39/91 done]: unit/pubsub (1 seconds) Testing unit/pubsubshard [ok]: corrupt payload: fuzzer findings - stream with no records (121 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: dismiss all data types memory (1119 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (0 ms) [ok]: SSUBSCRIBE to one channel more than once (0 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (1 ms) [ok]: PubSubShard with CLIENT REPLY OFF (88 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (215 ms) [ok]: dismiss client output buffer (235 ms) [ok]: failover with timeout aborts if replica never catches up (545 ms) [ok]: failovers can be aborted (14 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (214 ms) [ok]: dismiss client query buffer (203 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9429 ms) [ok]: setup replication for following tests (102 ms) [ok]: publish message to master and receive on replica (1 ms) [ok]: corrupt payload: fuzzer findings - huge string (216 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (221 ms) [ok]: failover aborts if target rejects sync request (519 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1928 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (127 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (214 ms) [40/91 done]: integration/psync2-master-restart (6 seconds) Testing unit/slowlog [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (123 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [41/91 done]: unit/pubsubshard (1 seconds) Testing unit/scripting [ok]: Dumping an RDB - functions only: no (1887 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (226 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: Make the old master a replica of the new one and check conditions (1004 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (201 ms) [ok]: SLOWLOG - max entries is correctly handled (6 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (2 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: Replication: commands with many arguments (issue #1221) (10293 ms) [ok]: spopwithcount rewrite srem command (75 ms) [ok]: dismiss replication backlog (1229 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (220 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (224 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (1 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (1 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (3 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [42/91 done]: integration/dismiss-mem (3 seconds) Testing unit/functions [ok]: FUNCTION - Basic usage (0 ms) [ok]: FUNCTION - Load with unknown argument (1 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (1 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (1 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: FUNCTION - test loading from rdb (13 ms) [ok]: FUNCTION - test debug reload different options (2 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (0 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (1 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (1 ms) [ok]: FUNCTION - test fcall_ro with read only commands (0 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: corrupt payload: fuzzer findings - empty zset (216 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [43/91 done]: integration/failover (5 seconds) Testing unit/maxmemory [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (216 ms) [ok]: SLOWLOG - can clean older entries (210 ms) [ok]: Dumping an RDB - functions only: yes (852 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (128 ms) [ok]: Scan mode (54 ms) [ok]: FUNCTION - test function kill (403 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (229 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (719 ms) [ok]: EVAL does not leak in the Lua stack (774 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (10 ms) [ok]: Number conversion precision test (issue #1118) (6 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (2 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (281 ms) [ok]: SLOWLOG - can be disabled (414 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (217 ms) [ok]: Script return recursive object (107 ms) [ok]: Script check unpack with massive arguments (41 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (1 ms) [ok]: Test print are not available (0 ms) [44/91 done]: unit/slowlog (2 seconds) Testing unit/introspection [ok]: FUNCTION - test script kill not working on function (404 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (216 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (2 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (3 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (3 ms) [ok]: Data divergence is allowed on writable replicas (2 ms) [ok]: CLIENT KILL close the client connection during bgsave (95 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (122 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (42 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (43 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (470 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (43 ms) [ok]: MONITOR can log executed commands (0 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (0 ms) [ok]: MONITOR supports redacting command arguments (1 ms) [ok]: MONITOR correctly handles multi-exec cases (0 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (120 ms) [ok]: MONITOR log blocked command only once (2 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (1 ms) [ok]: CLIENT SETINFO can set a library name to this connection (0 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (1 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [45/91 done]: integration/replication-4 (22 seconds) Testing unit/introspection-2 [ok]: eviction due to output buffers of many MGET clients, client eviction: true (70 ms) [ok]: FUNCTION - test function kill not working on eval (402 ms) [ok]: FUNCTION - test function flush (1 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (224 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (84 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Timedout script does not cause a false dead client (84 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (215 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (438 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (1 ms) [ok]: FUNCTION - restore is replicated to replica (0 ms) [ok]: FUNCTION - delete is replicated to replica (1 ms) [ok]: FUNCTION - flush is replicated to replica (0 ms) [ok]: Timedout script link is still usable after Lua returns (138 ms) [ok]: Disconnecting the replica from master instance (102 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (1 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 63063) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (219 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (216 ms) [ok]: CONFIG save params special case handled properly (884 ms) [ok]: CONFIG sanity (16 ms) [ok]: Timedout scripts and unblocked command (361 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (590 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (216 ms) [ok]: CONFIG REWRITE sanity (205 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (0 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (217 ms) [46/91 done]: integration/corrupt-dump (14 seconds) Testing unit/limits [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: Connecting as a replica (2134 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (170 ms) [ok]: Connect a replica to the master instance (105 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (334 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (341 ms) [ok]: LIBRARIES - test shared function can access default globals (0 ms) [ok]: LIBRARIES - usage and code sharing (0 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (1 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (1 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (739 ms) [ok]: CONFIG SET with multiple args (0 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (2 ms) [ok]: CONFIG SET duplicate configs (1 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (3 ms) [ok]: CONFIG GET multiple args (0 ms) [ok]: valkey-server command line arguments - error cases (61 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (308 ms) [ok]: valkey-server command line arguments - allow passing option name and option value in the same arg (236 ms) [ok]: LIBRARIES - load timeout (501 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (1 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (1 ms) [ok]: Piping raw protocol (930 ms) [ok]: Options -X with illegal argument (5 ms) [ok]: DUMP RESTORE with -x option (9 ms) [ok]: DUMP RESTORE with -X option (8 ms) [ok]: Check if maxclients works refusing connections (929 ms) [ok]: valkey-server command line arguments - wrong usage that we support anyway (214 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (333 ms) [47/91 done]: integration/valkey-cli (7 seconds) Testing unit/obuf-limits [48/91 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (0 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redis version api (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (0 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: BITCOUNT returns 0 against non existing key (0 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (1 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: valkey-server command line arguments - allow option value to use the `--` prefix (216 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [49/91 done]: unit/functions (4 seconds) Testing unit/bitfield [ok]: PSYNC2: Set #2 to replicate from #0 (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (326 ms) [ok]: BITFIELD signed SET and GET basics (0 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (1 ms) [ok]: BITFIELD unsigned overflow sat (0 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3517 ms) [ok]: valkey-server command line arguments - option name and option value in the same arg and `--` prefix (214 ms) [ok]: BITCOUNT fuzzing without start/end (265 ms) [ok]: Test replication with blocking lists and sorted sets operations (25005 ms) [ok]: BITFIELD overflow detection fuzzing (171 ms) [50/91 done]: integration/block-repl (26 seconds) Testing unit/geo [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (337 ms) [ok]: BITFIELD overflow wrap fuzzing (217 ms) [ok]: BITFIELD regression for #3221 (1 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3001 ms) [ok]: GEO with wrong type src key (2 ms) [ok]: GEO with non existing src key (0 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (1 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (1 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (1 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (1 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (0 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (1 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (0 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (0 ms) [ok]: GEODIST missing elements (1 ms) [ok]: GEORADIUS STORE option: syntax error (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: BITCOUNT fuzzing with start/end (469 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: BITCOUNT syntax error #2 (0 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (1 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (346 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: BITOP and fuzzing (207 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (2 ms) [ok]: TIME command using cached time (10 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: BITOP or fuzzing (226 ms) [51/91 done]: unit/bitfield (1 seconds) Testing unit/memefficiency [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (379 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: valkey-server command line arguments - save with empty input (1069 ms) [ok]: BITOP xor fuzzing (265 ms) [ok]: BITOP NOT fuzzing (35 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (3 ms) [ok]: BITPOS bit=0 works with intervals (0 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (2 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (208 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: valkey-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (213 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (388 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (148 ms) [ok]: Memory efficiency with values in range 32 (332 ms) [ok]: cannot modify protected configuration - no (1 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (194 ms) [ok]: cannot modify protected configuration - local (4 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (374 ms) [ok]: Memory efficiency with values in range 64 (342 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (171 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [52/91 done]: unit/bitops (3 seconds) Testing unit/hyperloglog [ok]: EVAL does not leak in the Lua stack (730 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: Memory efficiency with values in range 128 (345 ms) [ok]: Script return recursive object (109 ms) [ok]: Script check unpack with massive arguments (40 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (450 ms) [ok]: Memory efficiency with values in range 1024 (394 ms) [ok]: HyperLogLog self test passes (571 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (459 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: config during loading (951 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (85 ms) [ok]: Timedout script does not cause a false dead client (85 ms) [ok]: HyperLogLogs are promote from sparse to dense (422 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [ok]: Timedout script link is still usable after Lua returns (140 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (39 ms) [ok]: CONFIG REWRITE handles rename-command properly (334 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9417 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (617 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: TOUCH alters the last access time of a key (3001 ms) [ok]: Timedout scripts and unblocked command (359 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Client output buffer hard limit is enforced (3690 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Memory efficiency with values in range 16384 (1170 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2922 ms) [53/91 done]: unit/memefficiency (3 seconds) Testing unit/lazyfree [ok]: CONFIG REWRITE handles alias config properly (666 ms) [54/91 done]: unit/introspection (7 seconds) Testing unit/wait [ok]: HyperLogLog sparse encoding stress test (709 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (678 ms) [ok]: ziplist implementation: value encoding and backlink (10739 ms) [ok]: Setup slave (101 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: UNLINK can reclaim memory in background (242 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (282 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: lazy free a stream with all types of metadata (156 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [55/91 done]: unit/lazyfree (0 seconds) Testing unit/pause [ok]: maxmemory - policy volatile-random should only remove volatile keys. (661 ms) [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10020 ms) [56/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/querybuf [57/91 done]: integration/psync2-pingoff (17 seconds) Testing unit/tls [58/91 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (344 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (0 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (0 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (0 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (0 ms) [ok]: Test special commands are paused by RO (1 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (0 ms) [ok]: Test write multi-execs are blocked by pause RO (0 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (1 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1081 ms) [ok]: Test both active and passive expires are skipped during client pause (102 ms) [ok]: Test that client pause starts at the end of a transaction (1 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (672 ms) [ok]: Test when replica paused, offset would not grow (2 ms) [ok]: Test replica offset would grow after unpause (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (6 ms) [59/91 done]: unit/pause (1 seconds) Testing unit/oom-score-adj [ok]: CONFIG SET oom-score-adj works as expected (9 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [60/91 done]: unit/oom-score-adj (1 seconds) Testing unit/shutdown [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (20 ms) [ok]: TIME command using cached time (27 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (137 ms) [ok]: Tracking gets notification of expired keys (1003 ms) [ok]: Script block the time in some expiration related commands (120 ms) [ok]: RESTORE expired keys with expiration time (26 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (60 ms) [ok]: Tracking gets notification of lazy expired keys (153 ms) [ok]: HELLO 3 reply is correct (10 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1121 ms) [ok]: HELLO without protover (30 ms) [ok]: RESP3 based basic invalidation (23 ms) [ok]: RESP3 tracking redirection (33 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (30 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (7 ms) [ok]: EVAL - Return _G (7 ms) [ok]: TOUCH alters the last access time of a key in no-touch mode (3018 ms) [ok]: EVAL - Return table with a metatable that raise error (6 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (26 ms) [ok]: EVAL - Return table with a metatable that call redis (13 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (6 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (5 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (2 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (10 ms) [ok]: Temp rdb will be deleted in signal handle (217 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (3 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (7 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (54 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (7 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (6 ms) [ok]: EVAL - is Lua able to call Redis API? (8 ms) [ok]: EVAL - Redis integer -> Lua type conversion (12 ms) [ok]: EVAL - Lua number -> Redis integer conversion (10 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (13 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (23 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (7 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (13 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (86 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (13 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (27 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (57 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (23 ms) [ok]: EVAL - Scripts do not block on blpop command (19 ms) [ok]: EVAL - Scripts do not block on brpop command (19 ms) [ok]: Different clients can redirect to the same connection (47 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (19 ms) [ok]: EVAL - Scripts do not block on blmove command (19 ms) [ok]: Different clients using different protocols can track the same key (46 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (13 ms) [ok]: RDB save will be failed in shutdown (73 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (20 ms) [ok]: EVAL - Scripts do not block on wait (6 ms) [ok]: No invalidation message when using OPTIN option (54 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (33 ms) [ok]: EVAL - Scripts can run non-deterministic commands (6 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (6 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (7 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (33 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (6 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (13 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: SHUTDOWN will abort if rdb save failed on signal (94 ms) [ok]: EVAL - JSON numeric decoding (7 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (6 ms) [ok]: EVAL - JSON string decoding (3 ms) [ok]: Invalidation message sent when using OPTOUT option (23 ms) [ok]: EVAL - JSON smoke test (6 ms) [ok]: EVAL - cmsgpack can pack double? (7 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (14 ms) [ok]: EVAL - cmsgpack can pack negative int64? (6 ms) [ok]: Clean up rdb same named folder (6 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (39 ms) [ok]: PSYNC2: generate load while killing replication links (5005 ms) [ok]: Able to redirect to a RESP3 client (43 ms) [ok]: PSYNC2: cluster is consistent after load (x = 127147) (12 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (19 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (46 ms) [ok]: PSYNC2 #3899 regression: kill first replica (4 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (6 ms) [ok]: BCAST with prefix collisions throw errors (47 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (6 ms) [ok]: hdel deliver invalidate message after response in the same connection (37 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (177 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (180 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (10 ms) [ok]: Tracking invalidation message of eviction keys should be before response (3 ms) [ok]: Unblocked BLMOVE gets notification after response (2 ms) [61/91 done]: unit/shutdown (1 seconds) Testing unit/networking [ok]: EVAL - cmsgpack pack/unpack smoke test (414 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (6 ms) [ok]: EVAL - Numerical sanity check from bitop (6 ms) [ok]: EVAL - Verify minimal bitop functionality (7 ms) [ok]: EVAL - Able to parse trailing comments (6 ms) [ok]: Tracking gets notification on tracking table key eviction (49 ms) [ok]: Invalidation message received for flushall (2 ms) [ok]: Invalidation message received for flushdb (2 ms) [ok]: Test ASYNC flushall (3 ms) [ok]: EVAL_RO - Successful case (14 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: EVAL_RO - Cannot run write commands (13 ms) [ok]: redis.sha1hex() implementation (13 ms) [ok]: Globals protection reading an undeclared global variable (7 ms) [ok]: Globals protection setting an undeclared global* (7 ms) [ok]: lua bit.tohex bug (13 ms) [ok]: Test an example script DECR_IF_GT (40 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1133 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (83 ms) [ok]: CONFIG SET port number (240 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (203 ms) [ok]: Tracking info is correct (3 ms) [ok]: CLIENT GETREDIR provides correct client id (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (3 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (2 ms) [ok]: Regression test for #11715 (2 ms) [ok]: RESP3 based basic invalidation with client reply off (2 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1143 ms) [ok]: RESP2 based basic invalidation with client reply off (46 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (3 ms) [ok]: TOUCH returns the number of existing keys specified (27 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (2 ms) [ok]: command stats for GEOADD (26 ms) [ok]: errors stats for GEOADD (29 ms) [ok]: command stats for EXPIRE (34 ms) [ok]: command stats for BRPOP (26 ms) [ok]: query buffer resized correctly (2840 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4257 ms) [ok]: command stats for MULTI (66 ms) [ok]: Coverage: Basic CLIENT CACHING (30 ms) [ok]: Coverage: Basic CLIENT REPLY (6 ms) [ok]: CONFIG SET bind address (267 ms) [ok]: query buffer resized correctly when not idle (73 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (3 ms) [ok]: Coverage: Basic CLIENT GETREDIR (6 ms) [ok]: command stats for scripts (40 ms) [ok]: COMMAND COUNT get total number of Redis commands (7 ms) [ok]: COMMAND GETKEYS GET (6 ms) [ok]: COMMAND GETKEYSANDFLAGS (27 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (7 ms) [ok]: COMMAND GETKEYS XGROUP (6 ms) [ok]: COMMAND GETKEYS EVAL with keys (6 ms) [ok]: COMMAND GETKEYS EVAL without keys (7 ms) [ok]: COMMAND GETKEYS LCS (6 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (8 ms) [ok]: COMMAND LIST syntax error (18 ms) [ok]: EVAL does not leak in the Lua stack (507 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (9 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (3 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (7 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (5 ms) [ok]: Number conversion precision test (issue #1118) (6 ms) [ok]: String containing number precision test (regression of issue #1118) (7 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (6 ms) [62/91 done]: unit/tracking (3 seconds) Testing unit/client-eviction [ok]: Scripts can handle commands with incorrect arity (10 ms) [ok]: Correct handling of reused argv (issue #1939) (6 ms) [ok]: Functions in the Redis namespace are able to report errors (7 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (40 ms) [ok]: CLUSTER RESET can not be invoke from within a script (6 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (6 ms) [ok]: COMMAND INFO of invalid subcommands (10 ms) [ok]: SET command will not be marked with movablekeys (6 ms) [ok]: GET command will not be marked with movablekeys (7 ms) [ok]: Script with RESP3 map (27 ms) [ok]: MSET command will not be marked with movablekeys (6 ms) [ok]: BITFIELD command will not be marked with movablekeys (6 ms) [ok]: LMOVE command will not be marked with movablekeys (7 ms) [ok]: LPOP command will not be marked with movablekeys (6 ms) [ok]: BLPOP command will not be marked with movablekeys (6 ms) [ok]: PING command will not be marked with movablekeys (7 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (16895 ms) [ok]: MEMORY command will not be marked with movablekeys (6 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (7 ms) [ok]: RENAME command will not be marked with movablekeys (7 ms) [ok]: WAITAOF local copy before fsync (173 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (7 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (6 ms) [ok]: XREAD command is marked with movablekeys (6 ms) [ok]: EVAL command is marked with movablekeys (7 ms) [ok]: SORT command is marked with movablekeys (6 ms) [ok]: SORT_RO command is marked with movablekeys (6 ms) [ok]: MIGRATE command is marked with movablekeys (7 ms) [ok]: GEORADIUS command is marked with movablekeys (6 ms) [ok]: Script return recursive object (170 ms) [63/91 done]: unit/introspection-2 (11 seconds) Testing unit/violations [ok]: Script check unpack with massive arguments (73 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (1 ms) [ok]: client evicted due to large argv (120 ms) [ok]: client evicted due to large query buf (77 ms) [ok]: client evicted due to percentage of maxmemory (79 ms) [ok]: SORT adds integer field to list (50 ms) [ok]: CONFIG SET bind-source-addr (718 ms) [ok]: PSYNC2 #3899 regression: kill first replica (6 ms) [ok]: client evicted due to large multi buf (130 ms) [64/91 done]: unit/violations (0 seconds) Testing unit/replybufsize [ok]: Default bind address configuration handling (276 ms) [ok]: Protected mode works as expected (4 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (426 ms) [ok]: WAITAOF local copy everysec (923 ms) [ok]: WAITAOF local copy with appendfsync always (37 ms) [ok]: WAITAOF local wait and then stop aof (30 ms) [ok]: PSYNC2 #3899 regression: kill first replica (4 ms) [ok]: WAITAOF local on server with aof disabled (7 ms) [65/91 done]: unit/networking (2 seconds) Testing unit/cluster/announced-endpoints [ok]: PSYNC2: Set #2 to replicate from #0 (5 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (147 ms) [ok]: Timedout script does not cause a false dead client (140 ms) [ok]: PSYNC2 #3899 regression: kill first replica (4 ms) [ok]: WAITAOF local if AOFRW was postponed (361 ms) [ok]: verify reply buffer limits (757 ms) [ok]: Timedout script link is still usable after Lua returns (213 ms) [66/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: PSYNC2 #3899 regression: verify consistency (26 ms) [ok]: WAITAOF replica copy before fsync (127 ms) [ok]: Timedout scripts and unblocked command (520 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (7 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (213 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (10 ms) [ok]: client evicted due to watched key list (1882 ms) [ok]: Before the replica connects we issue two EVAL commands (3 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: query buffer resized correctly with fat argv (2930 ms) [67/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/cli [68/91 done]: integration/psync2-reg (23 seconds) Testing unit/cluster/scripting [ok]: PSYNC2: cluster is consistent after failover (27 ms) [ok]: Replication of script multiple pushes to list with BLPOP (670 ms) [ok]: Lua scripts using SELECT are replicated correctly (17 ms) [ok]: ziplist implementation: encoding stress testing (7445 ms) [ok]: WAITAOF replica copy everysec (1679 ms) [ok]: client evicted due to pubsub subscriptions (1099 ms) [69/91 done]: unit/type/list-3 (43 seconds) Testing unit/cluster/hostnames [ok]: client evicted due to tracking redirection (107 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (131 ms) [ok]: Test change cluster-announce-bus-port at runtime (247 ms) [ok]: Key lazy expires during key migration (39 ms) [ok]: Coverage: Basic cluster commands (47 ms) [70/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: WAITAOF replica copy everysec with AOFRW (1034 ms) [ok]: Connect a replica to the master instance (117 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (4 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (3 ms) [ok]: Redis.set_repl() don't accept invalid values (6 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (1 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9489 ms) [71/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/multi-slot-operations [ok]: Create 3 node cluster (2197 ms) [ok]: Run blocking command on cluster node3 (7 ms) [ok]: Test selective replication of certain Redis commands from Lua (779 ms) [ok]: PRNG is seeded randomly for command replication (14 ms) [ok]: Using side effects is not a problem with command replication (20 ms) [ok]: Perform a Resharding (53 ms) [ok]: Verify command got unblocked after resharding (36 ms) [ok]: Wait for cluster to be stable (96 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5998 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (43 ms) [ok]: Sanity test push cmd after resharding (13 ms) [ok]: Run blocking command again on cluster node1 (9 ms) [ok]: AOF rewrite during write load: RDB preamble=no (28857 ms) [ok]: Slave should be able to synchronize with the master (113 ms) [ok]: No response for single command if client output buffer hard limit is enforced (117 ms) [ok]: Turning off AOF kills the background writing child if any (133 ms) [ok]: AOF rewrite of list with listpack encoding, string data (183 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2103 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (130 ms) [ok]: WAITAOF replica copy appendfsync always (40 ms) [ok]: Detect write load to master (1014 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (36 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1051 ms) [ok]: Set cluster human announced nodename and let it propagate (150 ms) [ok]: test RESP2/2 big number protocol parsing (3 ms) [ok]: test RESP2/2 malformed big number protocol parsing (4 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (100 ms) [ok]: Set cluster hostnames and verify they are propagated (198 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (18 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: Obuf limit, KEYS stopped mid-run (84 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (804 ms) [72/91 done]: unit/obuf-limits (16 seconds) Testing unit/cluster/slot-ownership [ok]: Update hostnames and make sure they are all eventually propagated (265 ms) [ok]: AOF rewrite of list with listpack encoding, int data (112 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (1 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: Client blocked on XREADGROUP while stream's slot is migrated (9 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (213 ms) [73/91 done]: unit/cluster/misc (6 seconds) Testing unit/cluster/links [ok]: AOF rewrite of list with quicklist encoding, int data (212 ms) [ok]: Kill a cluster node and wait for fail state (1809 ms) [ok]: Verify command got unblocked after cluster failure (6 ms) [ok]: AOF rewrite of set with intset encoding, string data (134 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (348 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: Slave should be able to synchronize with the master (126 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (54 ms) [ok]: SCRIPTING FLUSH ASYNC (21 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (1 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (1 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (294 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (207 ms) [ok]: AOF rewrite of set with intset encoding, int data (103 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (130 ms) [ok]: EVAL does not leak in the Lua stack (337 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (74 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 168482) (7 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (4 ms) [ok]: Continuous slots distribution (61 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (141 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (21 ms) [ok]: MGET: mget shouldn't be propagated in Lua (81 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (229 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (93 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (69 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (203 ms) [ok]: Detect write load to master (1013 ms) [74/91 done]: unit/cluster/multi-slot-operations (4 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (357 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (4 ms) [ok]: Number conversion precision test (issue #1118) (5 ms) [ok]: String containing number precision test (regression of issue #1118) (4 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (112 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (3 ms) [ok]: Scripts can handle commands with incorrect arity (7 ms) [ok]: Correct handling of reused argv (issue #1939) (3 ms) [ok]: Functions in the Redis namespace are able to report errors (7 ms) [ok]: CLUSTER RESET can not be invoke from within a script (2 ms) [ok]: WAITAOF replica copy if replica is blocked (2000 ms) [ok]: Script with RESP3 map (24 ms) [ok]: Script return recursive object (116 ms) [ok]: Script check unpack with massive arguments (42 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (2 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (227 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (107 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (10 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (262 ms) [ok]: AOF rewrite functions (103 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (231 ms) [ok]: BGREWRITEAOF is refused if already in progress (24 ms) [76/91 done]: unit/aofrw (47 seconds) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (244 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1047 ms) [ok]: WAITAOF on promoted replica (86 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (107 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (146 ms) [ok]: Timedout script does not cause a false dead client (236 ms) [ok]: Timedout script link is still usable after Lua returns (166 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: Human nodenames are visible in log messages (3607 ms) [ok]: Timedout scripts and unblocked command (410 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (217 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (4 ms) [77/91 done]: unit/cluster/human-announced-nodename (7 seconds) [78/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: PSYNC2: Set #3 to replicate from #1 (6 ms) [ok]: Before the replica connects we issue two EVAL commands (10 ms) [ok]: Connect a replica to the master instance (137 ms) [ok]: Now use EVALSHA against the master, with both SHAs (10 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (6 ms) [ok]: Replication of script multiple pushes to list with BLPOP (20 ms) [ok]: EVALSHA replication when first call is readonly (24 ms) [ok]: Lua scripts using SELECT are replicated correctly (20 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (3844 ms) [ok]: GEOSEARCH fuzzy test - byradius (19434 ms) [ok]: Test restart will keep hostname information (260 ms) [ok]: Test hostname validation (1 ms) [ok]: Functions are added to new node on valkey-cli cluster add-node (3206 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2037 ms) [ok]: PSYNC2: cluster is consistent after failover (30 ms) [ok]: Connect a replica to the master instance (10 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (6 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (15 ms) [ok]: PRNG is seeded randomly for command replication (6 ms) [ok]: Using side effects is not a problem with command replication (13 ms) [79/91 done]: unit/cluster/hostnames (9 seconds) [ok]: Each node has two links with each peer (35 ms) [ok]: Validate cluster links format (2 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (987 ms) [ok]: Test scripting debug protocol parsing (19 ms) [ok]: Test scripting debug lua stack overflow (23 ms) { ping} { "+PONG"} [ok]: Test scripting debug lua server invocations (16 ms) [ok]: client evicted due to client tracking prefixes (10331 ms) [ok]: WAITAOF master isn't configured to do AOF (1033 ms) [ok]: client evicted due to output buf (18 ms) [ok]: client no-evict on (46 ms) [ok]: client no-evict off (36 ms) [ok]: WAITAOF replica isn't configured to do AOF (163 ms) [ok]: Verify that single primary marks replica as failed (3215 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (11 ms) [ok]: avoid client eviction when client is freed by output buffer limit (123 ms) [ok]: Script block the time in some expiration related commands (136 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (2 ms) [ok]: no-writes shebang flag (0 ms) [ok]: no-writes shebang flag on replica (109 ms) [ok]: not enough good replicas (1 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (894 ms) [ok]: decrease maxmemory-clients causes client eviction (597 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6476 ms) [ok]: not enough good replicas state change during long script (706 ms) [ok]: evict clients only until below limit (320 ms) [ok]: Slave should be able to synchronize with the master (136 ms) [ok]: Detect write load to master (4 ms) [ok]: allow-stale shebang flag (70 ms) [ok]: reject script do not cause a Lua stack leak (202 ms) [ok]: Consistent eval error reporting (11 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (1 ms) [ok]: LUA redis.status_reply API (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: evict clients in right order (large to small) (274 ms) [ok]: WAITAOF master sends PING after last write (1236 ms) [80/91 done]: unit/scripting (29 seconds) [ok]: client total memory grows during client no-evict (157 ms) [ok]: client total memory grows during maxmemory-clients disabled (165 ms) [81/91 done]: unit/client-eviction (17 seconds) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 203496) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (1 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Migrate the last slot away from a node using valkey-cli (4812 ms) [ok]: WAITAOF master client didn't send any write command (1216 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (16920 ms) [ok]: WAITAOF master client didn't send any command (1220 ms) [ok]: valkey-cli --cluster create with cluster-port (1916 ms) [ok]: Disconnect link when send buffer limit reached (9080 ms) [ok]: valkey-cli --cluster add-node with cluster-port (1439 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3493 ms) [82/91 done]: unit/cluster/cli (19 seconds) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 235750) (2 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (4 ms) [ok]: Link memory increases with publishes (727 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (261 ms) [ok]: Link memory resets after publish messages flush (456 ms) [ok]: Verify that multiple primaries mark replica as failed (6340 ms) [83/91 done]: integration/psync2 (43 seconds) [84/91 done]: unit/cluster/links (16 seconds) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7907 ms) [ok]: Slave should be able to synchronize with the master (123 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2584 ms) [ok]: Detect write load to master (1001 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1544 ms) [ok]: slave buffer are counted correctly (29174 ms) [ok]: setup replication for following tests (133 ms) [ok]: GEOSEARCH fuzzy test - bybox (15466 ms) [ok]: GEOSEARCH box edges fuzzy test (137 ms) [85/91 done]: unit/geo (35 seconds) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (619 ms) [86/91 done]: unit/wait (32 seconds) [ok]: replica buffer don't induce eviction (5804 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (163 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9386 ms) [ok]: client tracking don't cause eviction feedback loop (1291 ms) [ok]: propagation with eviction (96 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: propagation with eviction in MULTI (96 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (16534 ms) [ok]: lru/lfu value of the key just added (1 ms) [ok]: Only primary with slots has the right to mark a node as failed (11868 ms) [87/91 done]: unit/maxmemory (48 seconds) [88/91 done]: unit/cluster/failure-marking (27 seconds) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9436 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (49909 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (45 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3325 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1507 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (615 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [89/91 done]: unit/hyperloglog (57 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (16412 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6352 ms) [ok]: Slave should be able to synchronize with the master (803 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7925 ms) [ok]: Slave should be able to synchronize with the master (818 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9471 ms) [ok]: Slave should be able to synchronize with the master (1823 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (31452 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (10655 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (438 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (2 ms) [ok]: Slave should be able to synchronize with the master (839 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (41 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (359 ms) [ok]: Slave should be able to synchronize with the master (1832 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (982 ms) [ok]: Busy script during async loading (984 ms) [ok]: Blocked commands and configs during async-loading (460 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 41264 to exit... Waiting for process 41264 to exit... Waiting for process 41264 to exit... [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6365 ms) Waiting for process 41264 to exit... [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) Waiting for process 41264 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7927 ms) [ok]: Slave should be able to synchronize with the master (821 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9428 ms) [ok]: Slave should be able to synchronize with the master (766 ms) [ok]: Detect write load to master (2 ms) Waiting for process 41918 to exit... [ok]: diskless loading short read (28333 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9439 ms) [90/91 done]: integration/replication-psync (159 seconds) [ok]: diskless no replicas drop during rdb pipe (6739 ms) [ok]: diskless slow replicas drop during rdb pipe (3545 ms) [ok]: diskless fast replicas drop during rdb pipe (5856 ms) [ok]: diskless all replicas drop during rdb pipe (1190 ms) [ok]: diskless timeout replicas drop during rdb pipe (6252 ms) [ok]: diskless replication child being killed is collected (1458 ms) [ok]: replication child dies when parent is killed - diskless: yes (1079 ms) [ok]: replication child dies when parent is killed - diskless: no (1564 ms) [ok]: diskless replication read pipe cleanup (863 ms) [ok]: replicaof right after disconnection (1725 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (917 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync (105 ms) [ok]: replica can handle EINTR if use diskless load (669 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (99 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (96 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (123 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (106 ms) [ok]: PSYNC with wrong offset should throw error (2 ms) [ok]: Test replication with lazy expire (16 ms) [91/91 done]: integration/replication (195 seconds) Testing solo test [91/91 done]: list-large-memory (0 seconds) Testing solo test [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [91/91 done]: defrag (3 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (1 seconds) The End Execution time of different units: 0 seconds - unit/type/incr 0 seconds - unit/printver 0 seconds - unit/info-command 1 seconds - unit/protocol 2 seconds - unit/keyspace 2 seconds - unit/auth 2 seconds - unit/info 1 seconds - unit/quit 3 seconds - unit/type/hash 2 seconds - unit/acl 5 seconds - unit/type/stream-cgroups 1 seconds - unit/acl-v2 6 seconds - unit/sort 5 seconds - unit/multi 7 seconds - unit/scan 7 seconds - unit/type/string 6 seconds - unit/other 12 seconds - unit/type/list-2 12 seconds - unit/type/set 13 seconds - unit/type/list 8 seconds - unit/latency-monitor 12 seconds - unit/expire 1 seconds - integration/aof-race 9 seconds - integration/replication-2 10 seconds - integration/replication-3 19 seconds - unit/type/stream 0 seconds - integration/convert-zipmap-hash-on-load 1 seconds - integration/convert-ziplist-hash-on-load 20 seconds - unit/type/zset 8 seconds - integration/shutdown 0 seconds - integration/logging 0 seconds - integration/convert-ziplist-zset-on-load 7 seconds - integration/rdb 11 seconds - integration/replication-buffer 24 seconds - unit/dump 11 seconds - integration/aof-multi-part 12 seconds - integration/aof 1 seconds - integration/valkey-benchmark 1 seconds - unit/pubsub 6 seconds - integration/psync2-master-restart 1 seconds - unit/pubsubshard 3 seconds - integration/dismiss-mem 5 seconds - integration/failover 2 seconds - unit/slowlog 22 seconds - integration/replication-4 14 seconds - integration/corrupt-dump 7 seconds - integration/valkey-cli 1 seconds - unit/limits 4 seconds - unit/functions 26 seconds - integration/block-repl 1 seconds - unit/bitfield 3 seconds - unit/bitops 3 seconds - unit/memefficiency 7 seconds - unit/introspection 0 seconds - unit/lazyfree 20 seconds - integration/corrupt-dump-fuzzer 17 seconds - integration/psync2-pingoff 0 seconds - unit/tls 1 seconds - unit/pause 1 seconds - unit/oom-score-adj 1 seconds - unit/shutdown 3 seconds - unit/tracking 11 seconds - unit/introspection-2 0 seconds - unit/violations 2 seconds - unit/networking 1 seconds - unit/replybufsize 6 seconds - unit/querybuf 23 seconds - integration/psync2-reg 43 seconds - unit/type/list-3 3 seconds - unit/cluster/announced-endpoints 2 seconds - unit/cluster/scripting 16 seconds - unit/obuf-limits 6 seconds - unit/cluster/misc 4 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 47 seconds - unit/aofrw 7 seconds - unit/cluster/human-announced-nodename 4 seconds - unit/cluster/slot-ownership 9 seconds - unit/cluster/hostnames 29 seconds - unit/scripting 17 seconds - unit/client-eviction 19 seconds - unit/cluster/cli 43 seconds - integration/psync2 16 seconds - unit/cluster/links 35 seconds - unit/geo 32 seconds - unit/wait 48 seconds - unit/maxmemory 27 seconds - unit/cluster/failure-marking 57 seconds - unit/hyperloglog 159 seconds - integration/replication-psync 195 seconds - integration/replication 0 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 3 seconds - defrag 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' >>> valkey: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' Hint: It's a good idea to run 'make test' ;) INSTALL valkey-server INSTALL valkey-benchmark INSTALL valkey-cli INSTALL SYMLINK redis-server -> valkey-server INSTALL SYMLINK redis-cli -> valkey-cli INSTALL SYMLINK redis-benchmark -> valkey-benchmark INSTALL SYMLINK redis-check-rdb -> valkey-check-rdb INSTALL SYMLINK redis-check-aof -> valkey-check-aof INSTALL SYMLINK redis-sentinel -> valkey-sentinel make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.9/src' >>> valkey-benchmark*: Running split function benchmark... 'usr/bin/valkey-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-benchmark/usr/bin/valkey-benchmark' >>> valkey-benchmark*: Preparing subpackage valkey-benchmark... >>> valkey-benchmark*: Stripping binaries >>> valkey-benchmark*: Running postcheck for valkey-benchmark >>> valkey-cli*: Running split function cli... 'usr/bin/valkey-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-cli/usr/bin/valkey-cli' >>> valkey-cli*: Preparing subpackage valkey-cli... >>> valkey-cli*: Stripping binaries >>> valkey-cli*: Running postcheck for valkey-cli >>> valkey-compat*: Running split function compat... 'usr/bin/redis-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-benchmark' 'usr/bin/redis-check-aof' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-aof' 'usr/bin/redis-check-rdb' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-rdb' 'usr/bin/redis-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-cli' 'usr/bin/redis-sentinel' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-sentinel' 'usr/bin/redis-server' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-server' >>> valkey-compat*: Preparing subpackage valkey-compat... >>> valkey-compat*: Script found. /bin/sh added as a dependency for valkey-compat-7.2.9-r0.apk >>> valkey-compat*: Adding .pre-install >>> valkey-compat*: Running postcheck for valkey-compat >>> valkey-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/init.d' >>> valkey-openrc*: Preparing subpackage valkey-openrc... >>> valkey-openrc*: Running postcheck for valkey-openrc >>> valkey*: Running postcheck for valkey >>> valkey*: Preparing package valkey... >>> valkey*: Stripping binaries >>> valkey*: Script found. /bin/sh added as a dependency for valkey-7.2.9-r0.apk >>> valkey*: Adding .pre-install >>> valkey*: Adding .post-install >>> valkey-benchmark*: Scanning shared objects libfakeroot internal error: payload not recognized! >>> valkey-cli*: Scanning shared objects libfakeroot internal error: payload not recognized! >>> valkey-compat*: Scanning shared objects >>> valkey-openrc*: Scanning shared objects >>> valkey*: Scanning shared objects >>> valkey-benchmark*: Tracing dependencies... so:libc.musl-armv7.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 >>> valkey-benchmark*: Package size: 401.6 KB >>> valkey-benchmark*: Compressing data... >>> valkey-benchmark*: Create checksum... >>> valkey-benchmark*: Create valkey-benchmark-7.2.9-r0.apk >>> valkey-cli*: Tracing dependencies... so:libc.musl-armv7.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 >>> valkey-cli*: Package size: 378.6 KB >>> valkey-cli*: Compressing data... >>> valkey-cli*: Create checksum... >>> valkey-cli*: Create valkey-cli-7.2.9-r0.apk >>> valkey-compat*: Tracing dependencies... !redis !redict-compat /bin/sh valkey-cli=7.2.9-r0 valkey=7.2.9-r0 >>> valkey-compat*: Package size: 1.0 B >>> valkey-compat*: Compressing data... >>> valkey-compat*: Create checksum... libfakeroot internal error: payload not recognized! >>> valkey-compat*: Create valkey-compat-7.2.9-r0.apk >>> valkey-openrc*: Tracing dependencies... >>> valkey-openrc*: Package size: 2.3 KB >>> valkey-openrc*: Compressing data... >>> valkey-openrc*: Create checksum... >>> valkey-openrc*: Create valkey-openrc-7.2.9-r0.apk >>> valkey*: Tracing dependencies... /bin/sh so:libc.musl-armv7.so.1 so:libcrypto.so.3 so:libgcc_s.so.1 so:libssl.so.3 >>> valkey*: Package size: 1.9 MB >>> valkey*: Compressing data... >>> valkey*: Create checksum... >>> valkey*: Create valkey-7.2.9-r0.apk >>> valkey: Build complete at Thu, 08 May 2025 09:47:13 +0000 elapsed time 0h 3m 43s >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Uninstalling dependencies... (1/8) Purging .makedepends-valkey (20250508.094330) (2/8) Purging linux-headers (6.14.2-r0) (3/8) Purging openssl-dev (3.5.0-r0) (4/8) Purging tcl (8.6.16-r0) (5/8) Purging tzdata (2025b-r0) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libintl (0.24-r0) (8/8) Purging libproc2 (4.0.4-r2) Executing busybox-1.37.0-r16.trigger OK: 274 MiB in 102 packages >>> valkey: Updating the main/armv7 repository index... >>> valkey: Signing the index...