>>> redict: Building community/redict 7.3.0-r3 (using abuild 3.13.0-r3) started Fri, 17 May 2024 21:10:59 +0000 >>> redict: Checking sanity of /home/buildozer/aports/community/redict/APKBUILD... >>> redict: Analyzing dependencies... >>> redict: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r0) (2/8) Installing openssl-dev (3.3.0-r2) (3/8) Installing tzdata (2024a-r1) (4/8) Installing tcl (8.6.14-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r0) (7/8) Installing procps-ng (4.0.4-r0) (8/8) Installing .makedepends-redict (20240517.211100) Executing busybox-1.36.1-r26.trigger OK: 283 MiB in 118 packages >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Cleaning up tmpdir >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.0.tar.gz >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.0.tar.gz >>> redict: Checking sha512sums... redict-7.3.0.tar.gz: OK redict.conf.patch: OK sentinel.conf.patch: OK redict.initd: OK redict.confd: OK redict-sentinel.initd: OK redict.logrotate: OK >>> redict: Unpacking /var/cache/distfiles/redict-7.3.0.tar.gz... >>> redict: redict.conf.patch patching file redict.conf Hunk #1 succeeded at 153 (offset 41 lines). Hunk #2 succeeded at 304 (offset 63 lines). Hunk #3 succeeded at 322 (offset 63 lines). Hunk #4 succeeded at 334 (offset 64 lines). Hunk #5 succeeded at 489 (offset 67 lines). >>> redict: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). make -C src all make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep rm -rf redict-server redict-sentinel redict-cli redict-benchmark redict-check-rdb redict-check-aof *.o *.gcda *.gcno *.gcov redict.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d quicklist.d ae.d anet.d dict.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redict-check-rdb.d redict-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redict-cli.d zmalloc.d release.d ae.d redictassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redict-benchmark.d adlist.d dict.d zmalloc.d redictassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDICT_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 -flto=auto -fno-omit-frame-pointer >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs >> .make-settings echo REDICT_CFLAGS= >> .make-settings echo REDICT_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDICT_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/hiredict -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredict linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" > .make-ldflags) MAKE hiredict cd hiredict && make static USE_SSL=1 MAKE linenoise cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2" MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" AR="ar rc" MAKE hdr_histogram make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic hiredict.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sds.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' ar rcs libhiredict.a alloc.o net.o hiredict.o sds.o async.o read.o sockcompat.o ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs luac.o print.o liblua.a -lm ar rcs libhiredict_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' CC threads_mngr.o CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC kvstore.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC cluster_legacy.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redict-check-rdb.o CC redict-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC sha256.o CC tls.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC logreqres.o CC unix.o CC redict-cli.o CC redictassert.o CC cli_common.o CC cli_commands.o CC redict-benchmark.o LINK redict-benchmark LINK redict-cli LINK redict-server INSTALL redict-sentinel INSTALL redict-check-rdb INSTALL redict-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' make -C src test make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep CC release.o LINK redict-server LINK redict-cli LINK redict-benchmark INSTALL redict-check-aof Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 58675 Testing unit/printver [ready]: 58668 Testing unit/dump [ready]: 58669 Testing unit/auth [ready]: 58670 Testing unit/protocol [ready]: 58671 Testing unit/keyspace [ready]: 58672 Testing unit/scan [ready]: 58673 Testing unit/info [ready]: 58674 Testing unit/info-command [ready]: 58676 Testing unit/type/string [ready]: 58677 Testing unit/type/incr [ready]: 58678 Testing unit/type/list [ready]: 58679 Testing unit/type/list-2 [ready]: 58680 Testing unit/type/list-3 [ready]: 58681 Testing unit/type/set [ready]: 58682 Testing unit/type/zset [ready]: 58683 Testing unit/type/hash Testing Redict version 7.3.0 (00000000) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (1 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (2 ms) [ok]: DEL against a single item (1 ms) [ok]: Vararg DEL (1 ms) [ok]: SET and GET an item (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (1 ms) [ok]: info command with at most one sub command (2 ms) [ok]: INCR against non existing key (1 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: SET and GET an empty item (1 ms) [ok]: Untagged multi-key commands (1 ms) [ok]: info command with one sub-section (1 ms) [ok]: DECR against key created by incr (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (1 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: KEYS to get all keys (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: DBSIZE (0 ms) [ok]: Explicit regression for a list bug (2 ms) [ok]: INCR over 32bit value (1 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: KEYS with hashtag (2 ms) [ok]: INCR fails against key with spaces (left) (1 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: RESTORE can set LFU (1 ms) [ok]: DEL all keys (2 ms) [ok]: DECRBY negation overflow (1 ms) [ok]: RESTORE returns an error of the key already exists (1 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: HSET/HLEN - Small hash creation (2 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (2 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: Check encoding - listpack (1 ms) [ok]: packed node check compression with insert and pop (4 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: INCR uses shared objects in the 0-9999 range (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (1 ms) [ok]: packed node check compression combined with trim (2 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: INCR can modify objects in-place (2 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: packed node check compression with lset (1 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: INCRBYFLOAT against non existing key (1 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: ZADD XX updates existing elements score - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (1 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: string to double with null terminator (0 ms) [ok]: No negative zero (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (1 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: ZADD NX with non existing key - listpack (1 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (1 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: incr operation should update encoding from raw to int (1 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (1 ms) [ok]: HRANDFIELD - listpack (10 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: ZADD INCR LT/GT with inf - listpack (2 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (16 ms) [ok]: ZINCRBY against invalid incr value - listpack (1 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (2 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (1 ms) [ok]: ZCARD basics - listpack (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: SADD against non set (0 ms) [ok]: ZREM variadic version - listpack (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (1 ms) [ok]: SADD a non-integer against a small intset (1 ms) [ok]: HRANDFIELD - hashtable (9 ms) [ok]: ZRANGE basics - listpack (2 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly (1 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (1 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: ZRANK/ZREVRANK basics - listpack (2 ms) [ok]: ZRANK - after deletion - listpack (1 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (1 ms) [ok]: SADD a non-integer against a large intset (11 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: Handle an empty query (43 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (4 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (6 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: SADD an integer larger than 64 bits to a large intset (12 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (3 ms) [ok]: ZLEXCOUNT advanced - listpack (1 ms) [ok]: ZRANGEBYLEX with LIMIT - listpack (6 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (10 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: ZREMRANGEBYRANK basics - listpack (5 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (82 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: Negative multibulk length (50 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: ZREMRANGEBYLEX basics - listpack (15 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [1/91 done]: unit/info-command (1 seconds) Testing unit/type/stream [ok]: Negative multibulk payload length (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: Multi bulk request not followed by bulk arguments (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: Generic wrong number of args (1 ms) [2/91 done]: unit/printver (1 seconds) Testing unit/type/stream-cgroups [ok]: ZUNIONSTORE basics - listpack (2 ms) [ok]: Unbalanced number of quotes (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (2 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (1 ms) [3/91 done]: unit/type/incr (1 seconds) Testing unit/sort [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (51 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (1 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (1 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (14 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (3 ms) [ok]: latencystats: disable/enable (2 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: latencystats: configure percentiles (2 ms) [ok]: Very big payload in GET/SET (98 ms) [ok]: latencystats: bad configure percentiles (3 ms) [ok]: latencystats: blocking commands (3 ms) [ok]: latencystats: subcommands (1 ms) [ok]: Regression for quicklist #3343 bug (147 ms) [ok]: {standalone} SCAN basic (169 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (51 ms) [ok]: Protocol desync regression test #1 (74 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (1 ms) [ok]: latencystats: measure latency (52 ms) [ok]: errorstats: failed call authentication error (3 ms) [ok]: errorstats: failed call within MULTI/EXEC (5 ms) [ok]: errorstats: failed call within LUA (3 ms) [ok]: errorstats: failed call NOSCRIPT error (3 ms) [ok]: errorstats: failed call NOGROUP error (2 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (4 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: errorstats: rejected call by OOM error (2 ms) [ok]: errorstats: rejected call by authorization error (3 ms) [ok]: Check compression with recompress (60 ms) [ok]: errorstats: blocking commands (3 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XADD IDs correctly report an error when overflowing (1 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms) [ok]: XADD auto-generated sequence can't overflow (1 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (1 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (2 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (1 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (1 ms) [ok]: XPENDING only group (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: HRANDFIELD with - hashtable (205 ms) [ok]: Protocol desync regression test #2 (66 ms) [ok]: XPENDING with IDLE (21 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (2 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (2 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (23 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (2 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (2 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (2 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (2 ms) [ok]: Protocol desync regression test #3 (68 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (1 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (1 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: test big number parsing (0 ms) [ok]: {standalone} SCAN COUNT (143 ms) [ok]: test bool parsing (2 ms) [ok]: test verbatim str parsing (0 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (25 ms) [ok]: MIGRATE is caching connections (230 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (4 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (5 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (2 ms) [ok]: Set encoding after DEBUG RELOAD (158 ms) [ok]: SREM basics - $type (1 ms) [ok]: XADD with MAXLEN option (120 ms) [ok]: SREM basics - $type (14 ms) [ok]: SREM basics - intset (0 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (2 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: test large number of args (54 ms) [ok]: test argument rewriting - issue 9598 (0 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (4 ms) [ok]: SUNION with two sets - regular (13 ms) [ok]: plain node check compression with insert and pop (412 ms) [ok]: {standalone} SCAN MATCH (118 ms) [ok]: SUNIONSTORE with two sets - regular (13 ms) [ok]: SINTER against three sets - regular (1 ms) [ok]: SINTERCARD against three sets - regular (0 ms) [ok]: SINTERSTORE with three sets - regular (1 ms) [ok]: HRANDFIELD with - listpack (200 ms) [ok]: errorstats: limit errors will not increase indefinitely (226 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: SUNION with non existing keys - regular (13 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (10 ms) [ok]: Crash due to wrongly recompress after lrem (249 ms) [ok]: XADD with MAXLEN option and the '=' argument (121 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (61 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (4 ms) [ok]: SUNION with two sets - intset (13 ms) [ok]: Quicklist: SORT BY key (19 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: SUNIONSTORE with two sets - intset (13 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (1 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: SUNION with non existing keys - intset (13 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: Quicklist: SORT BY hash field (20 ms) [ok]: plain node check compression combined with trim (148 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (50 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (9 ms) [ok]: XADD with MAXLEN option and the '~' argument (112 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: HSET/HLEN - Big hash creation (143 ms) [ok]: Is the big hash encoded with an hash table? (1 ms) [ok]: HGET against the small hash (0 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (29 ms) [ok]: SUNION hashtable and listpack (2 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: {standalone} SCAN TYPE (185 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: HGET against the big hash (89 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (1 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (1 ms) [ok]: XADD with MINID option (130 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: {standalone} SCAN unknown type (121 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: HMSET - big hash (77 ms) [ok]: HMGET against non existing key and fields (1 ms) [ok]: Hash commands against wrong type (3 ms) [ok]: HMGET - small hash (0 ms) [ok]: plain node check compression with lset (199 ms) [ok]: HMGET - big hash (68 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HKEYS - big hash (19 ms) [ok]: HVALS - small hash (0 ms) [ok]: {standalone} SCAN with expired keys (113 ms) [ok]: HVALS - big hash (3 ms) [ok]: HGETALL - small hash (0 ms) [ok]: HGETALL - big hash (42 ms) [ok]: HGETALL against non-existing key (1 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (1 ms) [ok]: HEXISTS (0 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (1 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (1 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (1 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (1 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (1 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (1 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (1 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: Test LPUSH and LPOP on plain nodes (5 ms) [ok]: Test LINDEX and LINSERT on plain nodes (2 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (2 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (133 ms) [ok]: {standalone} SSCAN with encoding intset (2 ms) [ok]: {standalone} SSCAN with encoding listpack (2 ms) [ok]: {standalone} SSCAN with encoding hashtable (7 ms) [ok]: {standalone} HSCAN with encoding listpack (3 ms) [ok]: HSTRLEN against the big hash (89 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (3 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: Hash fuzzing #1 - 10 fields (42 ms) [ok]: Hash fuzzing #2 - 10 fields (26 ms) [ok]: Test LSET with packed / plain combinations (148 ms) [ok]: Test LSET with packed is split in the middle (3 ms) [ok]: DEL against expired key (1100 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (1 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (1 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (1 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: {standalone} HSCAN with encoding hashtable (119 ms) [ok]: COPY basic usage for string (2 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: {standalone} ZSCAN with encoding listpack (3 ms) [ok]: COPY for string ensures that copied data is independent of copying data (1 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: COPY basic usage for list - quicklist (49 ms) [ok]: COPY basic usage for list - listpack (2 ms) [ok]: COPY basic usage for $type set (2 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (28 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: {standalone} ZSCAN with encoding skiplist (102 ms) [ok]: COPY basic usage for skiplist sorted set (20 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: {standalone} SCAN guarantees check under write load (29 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: {standalone} SSCAN with PATTERN (1 ms) [ok]: {standalone} HSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with NOVALUES (1 ms) [ok]: {standalone} ZSCAN with PATTERN (0 ms) [ok]: COPY basic usage for hashtable hash (31 ms) [ok]: Test LSET with packed consist only one item (197 ms) [ok]: Crash due to delete entry from a compress quicklist node (2 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: Test LPUSH and LPOP on plain nodes (4 ms) [ok]: Test LINDEX and LINSERT on plain nodes (2 ms) [ok]: Test LTRIM on plain nodes (2 ms) [ok]: Test LREM on plain nodes (2 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (3 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (77 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1091 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (4 ms) [ok]: RENAME can unblock XREADGROUP with data (2 ms) [ok]: COPY basic usage for stream (167 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (2 ms) [ok]: COPY basic usage for stream-cgroups (11 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (1 ms) [ok]: SET/GET keys in different DBs (2 ms) [ok]: RANDOMKEY (9 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (2 ms) [ok]: Coverage: SWAPDB and FLUSHDB (1 ms) [ok]: MASTERAUTH test with binary password (911 ms) [ok]: Test LSET with packed / plain combinations (201 ms) [ok]: Test LSET with packed is split in the middle (2 ms) [5/91 done]: unit/keyspace (2 seconds) Testing unit/other [ok]: Coverage: HELP commands (4 ms) [ok]: Coverage: MEMORY MALLOC-STATS (0 ms) [ok]: Coverage: MEMORY PURGE (1 ms) [ok]: SAVE - make sure there are all the types as values (3 ms) [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: Test LSET with packed consist only one item (197 ms) [ok]: Crash due to delete entry from a compress quicklist node (2 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (1 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: EXEC fail on lazy expired WATCHed key (103 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (0 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (0 ms) [ok]: SWAPDB is able to touch the watched keys that exist (0 ms) [ok]: LPOS basic usage - quicklist (42 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (2 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (2 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: SWAPDB does not touch watched stale keys (3 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (4 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (97 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: XCLAIM can claim PEL items from another consumer (606 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (48 ms) [ok]: LPOS basic usage - listpack (1 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (3 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (1 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (1 ms) [ok]: BLPOP: single existing list - quicklist (52 ms) [ok]: stats: instantaneous metrics (1603 ms) [ok]: BLPOP: multiple existing lists - quicklist (120 ms) [ok]: stats: debug metrics (114 ms) [ok]: BLPOP: second list has an entry - quicklist (50 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (60 ms) [ok]: stats: client input and output buffer limit disconnections (144 ms) [ok]: clients: pubsub clients (3 ms) [ok]: clients: watching clients (12 ms) [ok]: XCLAIM without JUSTID increments delivery count (403 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (110 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (60 ms) [ok]: BRPOPLPUSH - quicklist (50 ms) [ok]: BLMOVE left left - quicklist (50 ms) [ok]: XCLAIM same consumer (202 ms) [ok]: BLMOVE left right - quicklist (50 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (5 ms) [ok]: BLMOVE right left - quicklist (50 ms) [ok]: BLMOVE right right - quicklist (50 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: BLPOP: multiple existing lists - listpack (2 ms) [ok]: BLPOP: second list has an entry - listpack (2 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (1 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (2 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (2 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (2 ms) [ok]: FUZZ stresser with data model binary (1164 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (2 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (2 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (3 ms) [ok]: BRPOPLPUSH with multiple blocked clients (3 ms) [7/91 done]: unit/info (3 seconds) Testing unit/quit [ok]: BLMPOP with multiple blocked clients (4 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (2 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (2 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (2 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: QUIT returns OK (1 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: WATCH will consider touched expired keys (1105 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (0 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [8/91 done]: unit/quit (1 seconds) Testing unit/aofrw [ok]: MULTI / EXEC is not propagated (single write command) (49 ms) [ok]: XADD mass insertion and XLEN (2400 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (1 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (102 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (604 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (103 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (99 ms) [ok]: XAUTOCLAIM as an iterator (203 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (1 ms) [ok]: XCLAIM with XDEL (2 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (2 ms) [ok]: XAUTOCLAIM with XDEL and count (3 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XINFO FULL output (8 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: Hash fuzzing #1 - 512 fields (2439 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: Consumer seen-time and active-time (210 ms) [ok]: MULTI / EXEC with REPLICAOF (102 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (3 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: XREADGROUP with NOACK creates consumer (5 ms) [ok]: BRPOPLPUSH timeout (1012 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (109 ms) [ok]: SETEX - Wait for the key to expire (1101 ms) [ok]: SETEX - Wrong time parameter (1 ms) [ok]: PERSIST can undo an EXPIRE (0 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (121 ms) [ok]: XRANGE can be used to iterate the whole stream (865 ms) [ok]: Consumer group read counter and lag in empty streams (3 ms) [ok]: Consumer group read counter and lag sanity (13 ms) [ok]: Consumer group lag with XDELs (22 ms) [ok]: Loading from legacy (Redict <= v6.2.x, rdb_ver < 10) persistence (2 ms) [ok]: Loading from legacy (Redict <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: Big Quicklist: SORT BY key (524 ms) [ok]: Big Quicklist: SORT BY key with limit (12 ms) [ok]: MULTI and script timeout (407 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (298 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (106 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (104 ms) [ok]: FUZZ stresser with data model alpha (1586 ms) [ok]: EXEC and script timeout (406 ms) [ok]: Big Quicklist: SORT BY hash field (570 ms) [ok]: Intset: SORT BY key (1 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (107 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (6 ms) [ok]: XREADGROUP ACK would propagate entries-read (6 ms) [ok]: MULTI-EXEC body and script timeout (405 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (104 ms) [ok]: Hash table: SORT BY key (20 ms) [ok]: Hash table: SORT BY key with limit (1 ms) [ok]: EXPIRE precision is now the millisecond (1103 ms) [ok]: Hash table: SORT BY hash field (20 ms) [9/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/acl [ok]: PSETEX can set sub-second expires (102 ms) [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (0 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (1 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (2 ms) [ok]: It's possible to allow subscribing to a subset of channels (0 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (1 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (2 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (2 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: BLPOP: timeout value out of range (1 ms) [ok]: ACLs can exclude single commands (1 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (1 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (1 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (2 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (3 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: ACL GETUSER is able to translate back command permissions (2 ms) [ok]: just EXEC and script timeout (405 ms) [ok]: exec with write commands and state change (1 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: ACL GETUSER provides reasonable results (20 ms) [ok]: ACL GETUSER provides correct results (6 ms) [ok]: ACL CAT with illegal arguments (1 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (2 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (1 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (6 ms) [ok]: ACL LOG shows failed command executions at toplevel (2 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: Hash fuzzing #2 - 512 fields (1817 ms) [ok]: ACL LOG is able to log channel access violations and channel name (2 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (2 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (2 ms) [ok]: ACL LOG can log failed auth attempts (2 ms) [ok]: ACLLOG - zero max length is correctly handled (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (4 ms) [ok]: ACL LOG entries are still present on update of max len config (1 ms) [ok]: When default user is off, new connections are not authenticated (1 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (0 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (1 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (4 ms) [ok]: ACL-Metrics invalid command accesses (3 ms) [ok]: ACL-Metrics invalid key accesses (3 ms) [ok]: ACL-Metrics invalid channels accesses (3 ms) [ok]: exec with read commands and stale replica state change (151 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: PEXPIREAT can set sub-second expires (203 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: MULTI propagation of PUBLISH (96 ms) [ok]: default: load from include file, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (1 ms) [ok]: ACL LOAD only disconnects affected clients (3 ms) [ok]: ACL LOAD disconnects clients of deleted users (2 ms) [ok]: ACL load and save (2 ms) [ok]: ACL load and save with restricted channels (2 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: MULTI propagation of EVAL (101 ms) [ok]: Very big payload random access (5669 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (3 ms) [ok]: Single channel is valid (1 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: MULTI propagation of SCRIPT FLUSH (102 ms) [ok]: FUZZ stresser with data model compr (1517 ms) [ok]: MULTI propagation of XREADGROUP (102 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (2 ms) [ok]: MULTI with BGREWRITEAOF (204 ms) [ok]: Redict should actively expire keys incrementally (704 ms) [ok]: BGSAVE (56 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: MULTI with config set appendonly (209 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (1 ms) [ok]: BLPOP: timeout (1066 ms) [ok]: BLPOP: arguments are empty (3 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (1 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: MULTI with FLUSHALL and AOF (4 ms) [ok]: ZDIFF fuzzing - listpack (6506 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (3 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (3 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (3 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (3 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (2 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (3 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (3 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: ZADD XX existing key - skiplist (1 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (3 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (1 ms) [ok]: ZINCRBY against invalid incr value - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (1 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (1 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (1 ms) [ok]: ZRANGE basics - skiplist (4 ms) [ok]: ZREVRANGE basics - skiplist (4 ms) [10/91 done]: unit/multi (5 seconds) Testing unit/acl-v2 [ok]: ZRANK/ZREVRANK basics - skiplist (3 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (2 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: Test loading an ACL file with duplicate users (4 ms) [ok]: Test loading an ACL file with duplicate default user (4 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (8 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (8 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: Test loading duplicate users in config on startup (20 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (5 ms) [ok]: ZLEXCOUNT advanced - skiplist (3 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (9 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (17 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (8 ms) [ok]: XREVRANGE returns the reverse of XRANGE (2824 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (20 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: XRANGE exclusive ranges (5 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: ZUNIONSTORE basics - skiplist (2 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (3 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (1 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (1 ms) [ok]: ZINTER RESP3 - skiplist (2 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (1 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (3 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (1 ms) [ok]: Test basic multiple selectors (2 ms) [ok]: Test ACL selectors by default have no permissions (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (3 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: Test deleting selectors (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: Test flexible selector definition (2 ms) [ok]: Test separate read permission (1 ms) [ok]: ZDIFF algorithm 1 - skiplist (2 ms) [ok]: Test separate write permission (0 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: ZDIFF algorithm 2 - skiplist (2 ms) [ok]: Test separate read and write permissions on different selectors are not additive (2 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (2 ms) [ok]: Test ACL GETUSER response information (0 ms) [ok]: Test ACL list idempotency (2 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: Test various odd commands for key permissions (4 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (3 ms) [ok]: Cardinality commands require some type of permission to execute (3 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (3 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: Test behavior of loading ACLs (2 ms) [ok]: ACL from config file and config rewrite (210 ms) [11/91 done]: unit/acl-v2 (1 seconds) Testing unit/latency-monitor [12/91 done]: unit/acl (2 seconds) Testing integration/block-repl [ok]: Redict should lazy expire keys (1003 ms) [ok]: LATENCY HISTOGRAM with empty histogram (0 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: LATENCY HISTOGRAM sub commands (2 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (2 ms) [ok]: BRPOP: timeout (1071 ms) [ok]: BRPOP: arguments are empty (3 ms) [ok]: BLMPOP_LEFT: with single empty list argument (2 ms) [ok]: BLMPOP_LEFT: with negative timeout (0 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (2 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: SDIFF fuzzing (6968 ms) [ok]: SDIFF against non-set should throw error (2 ms) [ok]: SDIFF should handle non existing key as empty (1 ms) [ok]: SDIFFSTORE against non-set should throw error (2 ms) [ok]: SDIFFSTORE should handle non existing key as empty (2 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (1 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (3 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (2 ms) [ok]: SUNION against non-set should throw error (2 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (2 ms) [ok]: SUNIONSTORE should handle non existing key as empty (3 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (1 ms) [ok]: SPOP basics - listpack (2 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (15 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (2 ms) [ok]: SRANDMEMBER - intset (14 ms) [ok]: SPOP integer from listpack set (2 ms) [ok]: SPOP with - listpack (6 ms) [ok]: SPOP with - intset (6 ms) [ok]: SPOP with - hashtable (6 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (5 ms) [ok]: SPOP using integers with Knuth's algorithm (1 ms) [ok]: SPOP new implementation: code path #1 intset (4 ms) [ok]: SPOP new implementation: code path #2 intset (4 ms) [ok]: SPOP new implementation: code path #3 intset (5 ms) [ok]: SPOP new implementation: code path #1 listpack (4 ms) [ok]: SPOP new implementation: code path #2 listpack (4 ms) [ok]: SPOP new implementation: code path #3 listpack (5 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (30 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (1 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (47 ms) [ok]: Check consistency of different data types after a reload (1586 ms) [ok]: SRANDMEMBER with - intset (64 ms) [ok]: SRANDMEMBER with - hashtable (63 ms) [ok]: SRANDMEMBER histogram distribution - listpack (194 ms) [ok]: Same dataset digest if saving/reloading as AOF? (341 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (2 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (1 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (0 ms) [ok]: EXPIRE with big negative integer (1 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (57 ms) [ok]: SRANDMEMBER histogram distribution - intset (196 ms) [ok]: First server should have role slave after SLAVEOF (1002 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (159 ms) [ok]: BLMPOP_LEFT: timeout (1070 ms) [ok]: BLMPOP_LEFT: arguments are empty (4 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (2793 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (2 ms) [ok]: SETNX target key exists (1 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (2 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (2 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (3260 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: Hash ziplist of various encodings (106 ms) [ok]: Hash ziplist of various encodings - sanitize dump (6 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [13/91 done]: unit/type/hash (9 seconds) Testing integration/replication [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (1 ms) [ok]: XREAD with non empty second stream (2246 ms) [ok]: Blocking XREAD waiting new data (2 ms) [ok]: Blocking XREAD waiting old data (0 ms) [ok]: Blocking XREAD will not reply with an empty array (78 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD last element from non-empty stream (2 ms) [ok]: XREAD last element from empty stream (1 ms) [ok]: XREAD last element blocking from empty stream (2 ms) [ok]: XREAD last element blocking from non-empty stream (1 ms) [ok]: XREAD last element from multiple streams (3 ms) [ok]: XREAD last element with count > 1 (1 ms) [ok]: XREAD: XADD + DEL should not awake client (3 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (4 ms) [ok]: XREAD with same stream name multiple times should work (2 ms) [ok]: XREAD + multiple XADD inside transaction (5 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (2 ms) [ok]: Big Hash table: SORT BY key (551 ms) [ok]: Big Hash table: SORT BY key with limit (16 ms) [ok]: BLMPOP_RIGHT: timeout (1068 ms) [ok]: BLMPOP_RIGHT: arguments are empty (3 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: BLMPOP propagate as pop with count command to replica (198 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (43 ms) [ok]: LINSERT - quicklist (52 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (3 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: Big Hash table: SORT BY hash field (536 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (1 ms) [ok]: SORT GET (key and hash) with sanity check (4 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (2 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: LINDEX consistency test - listpack (86 ms) [ok]: SORT regression for issue #19, sorting floats (14 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (1 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (1 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (1 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (1 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (1 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: LINDEX random access - listpack (59 ms) [ok]: SORT speed, 100 element list BY key, 100 times (37 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (41 ms) [ok]: SORT speed, 100 element list directly, 100 times (29 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (113 ms) [ok]: SORT speed, 100 element list BY , 100 times (24 ms) [ok]: SETRANGE with huge offset (3 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2108 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2020 ms) [ok]: SORT STORE quicklist with the right options (75 ms) [ok]: LINDEX consistency test - listpack (173 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (54 ms) [ok]: LINDEX random access - listpack (128 ms) [ok]: First server should have role slave after REPLICAOF (2 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (8 ms) [ok]: Test latency events logging (3402 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (244 ms) [ok]: LINDEX consistency test - quicklist (78 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (299 ms) [ok]: LINDEX random access - quicklist (52 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (114 ms) [ok]: LINDEX consistency test - quicklist (166 ms) [ok]: LINDEX random access - quicklist (106 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (216 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (1 ms) [ok]: RPOPLPUSH base case - quicklist (43 ms) [ok]: LMOVE left left base case - quicklist (50 ms) [ok]: LMOVE left right base case - quicklist (50 ms) [ok]: LMOVE right left base case - quicklist (60 ms) [ok]: LMOVE right right base case - quicklist (50 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (11222 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (50 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (60 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (50 ms) [ok]: SETNX against expired volatile key (3402 ms) [ok]: GETEX EX option (1 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (50 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (1 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: GETDEL propagate as DEL command to replica (39 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (50 ms) [ok]: {standalone} SCAN regression test for issue #4906 (10727 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (35 ms) [ok]: GETEX without argument does not propagate to replica (100 ms) [ok]: MGET (7 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (1 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (1 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (1 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (121 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (110 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (109 ms) [ok]: sort by in cluster mode (1 ms) [ok]: sort get in cluster mode (0 ms) [ok]: sort_ro by in cluster mode (1 ms) [ok]: sort_ro get in cluster mode (0 ms) [14/91 done]: unit/sort (12 seconds) Testing integration/replication-2 [ok]: LMOVE right left with quicklist source and existing target quicklist (109 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (2298 ms) [ok]: APPEND basics (1 ms) [ok]: APPEND basics, integer encoded values (0 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (100 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (50 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (60 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (50 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (49 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (1 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (1 ms) [ok]: SETBIT fuzzing (682 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (2 ms) [ok]: SETRANGE against integer-encoded key (3 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (1 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (50 ms) [ok]: RPOPLPUSH base case - listpack (3 ms) [ok]: LMOVE left left base case - listpack (2 ms) [ok]: LMOVE left right base case - listpack (2 ms) [ok]: LMOVE right left base case - listpack (2 ms) [ok]: LMOVE right right base case - listpack (2 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (2 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (2 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: APPEND fuzzing (326 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (52 ms) [ok]: FLUSHDB (34 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (2 ms) [ok]: RESET clears client state (0 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (1 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (51 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2003 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (60 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (65 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (1 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (1 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (50 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (60 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (2 ms) [ok]: LMOVE left left with listpack source and existing target listpack (2 ms) [ok]: LMOVE left right with listpack source and existing target listpack (2 ms) [ok]: LMOVE right left with listpack source and existing target listpack (2 ms) [ok]: LMOVE right right with listpack source and existing target listpack (2 ms) [ok]: RPOPLPUSH against non existing key (1 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: Redict should not propagate the read command on lazy expire (93 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (56 ms) [ok]: RPOPLPUSH against non list dst key - listpack (2 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: XDEL fuzz test (4036 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (108 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (3 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (2 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: Mass RPOP/LPOP - listpack (72 ms) [ok]: Mass RPOP/LPOP - listpack (144 ms) [ok]: LMPOP with illegal argument (3 ms) [ok]: Don't rehash if redict has child process (507 ms) [ok]: LMPOP single existing list - quicklist (155 ms) [ok]: Process title set as expected (1 ms) [ok]: LMPOP multiple existing lists - quicklist (241 ms) [ok]: LMPOP single existing list - listpack (5 ms) [ok]: LMPOP multiple existing lists - listpack (6 ms) [ok]: LMPOP propagate as pop with count command to replica (49 ms) [ok]: LRANGE basics - quicklist (50 ms) [ok]: LRANGE inverted indexes - quicklist (49 ms) [ok]: ZDIFF fuzzing - skiplist (7310 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (50 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZPOP/ZMPOP against wrong type (2 ms) [ok]: LTRIM stress testing - quicklist (14179 ms) [ok]: ZMPOP with illegal argument (3 ms) [ok]: LRANGE out of range negative end index - quicklist (50 ms) [ok]: LRANGE basics - listpack (2 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (1 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: ZMPOP propagate as pop with count command to replica (53 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (2 ms) [ok]: {cluster} SCAN basic (162 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (197 ms) [ok]: ZMPOP readraw in RESP3 (3 ms) [ok]: {cluster} SCAN COUNT (140 ms) [ok]: {cluster} SCAN MATCH (115 ms) [ok]: BZMPOP readraw in RESP3 (198 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (2 ms) [ok]: {cluster} SCAN TYPE (167 ms) [ok]: LTRIM basics - quicklist (594 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (196 ms) [ok]: ZMPOP readraw in RESP2 (3 ms) [ok]: {cluster} SCAN unknown type (115 ms) [ok]: GETRANGE fuzzing (2039 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (1 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (1 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (1 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (0 ms) [ok]: LCS indexes (1 ms) [ok]: LTRIM out of range negative end index - quicklist (99 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: LSET - quicklist (50 ms) [ok]: LSET out of range index - quicklist (0 ms) [15/91 done]: unit/type/string (16 seconds) Testing integration/replication-3 [ok]: LTRIM basics - listpack (12 ms) [ok]: LTRIM out of range negative end index - listpack (2 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: {cluster} SCAN with expired keys (130 ms) [ok]: LREM remove all the occurrences - quicklist (45 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (1 ms) [ok]: BZMPOP readraw in RESP2 (198 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (1 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: LREM starting from tail with negative count - quicklist (49 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (49 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (130 ms) [ok]: {cluster} SSCAN with encoding intset (3 ms) [ok]: BLPOP/BLMOVE should increase dirty (3 ms) [ok]: {cluster} SSCAN with encoding listpack (2 ms) [ok]: client unblock tests (5 ms) [ok]: client unblock tests (3 ms) [ok]: {cluster} SSCAN with encoding hashtable (7 ms) [ok]: {cluster} HSCAN with encoding listpack (2 ms) [ok]: List listpack -> quicklist encoding conversion (4 ms) [ok]: ZUNIONSTORE result is sorted (143 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (1 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (1 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (34 ms) [ok]: {cluster} HSCAN with encoding hashtable (115 ms) [ok]: {cluster} ZSCAN with encoding listpack (2 ms) [ok]: ZMSCORE - listpack (33 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (38 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: MIGRATE cached connections are released after some time (15003 ms) [ok]: List listpack -> quicklist encoding conversion (198 ms) [ok]: ZSET sorting stresser - listpack (46 ms) [ok]: {cluster} ZSCAN with encoding skiplist (99 ms) [ok]: {cluster} SCAN guarantees check under write load (28 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (1 ms) [ok]: {cluster} HSCAN with NOVALUES (0 ms) [ok]: {cluster} ZSCAN with PATTERN (1 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (71 ms) [ok]: MIGRATE is able to migrate a key between two instances (216 ms) [ok]: List quicklist -> listpack encoding conversion (250 ms) [ok]: List encoding conversion when RDB loading (6 ms) [ok]: List invalid list-max-listpack-size config (54 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2824 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: List of various encodings (105 ms) [ok]: List of various encodings - sanitize dump (5 ms) [ok]: Unblock fairness is kept while pipelining (3 ms) [ok]: MIGRATE is able to copy a key between two instances (218 ms) [ok]: Unblock fairness is kept during nested unblock (4 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (12498 ms) [ok]: Blocking command accounted only once in commandstats (3 ms) [ok]: Blocking command accounted only once in commandstats after timeout (2 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (47 ms) [16/91 done]: unit/type/list (17 seconds) Testing integration/replication-4 [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (221 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: MIGRATE propagates TTL correctly (218 ms) [ok]: expire scan should skip dictionaries with lot's of empty buckets (1224 ms) [17/91 done]: unit/expire (16 seconds) Testing integration/replication-psync [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Redict can trigger resizing (1825 ms) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (51 ms) [ok]: Redict can rewind and trigger smaller slot resizing (700 ms) [ok]: Redict can resize empty dict (31 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [18/91 done]: unit/other (17 seconds) Testing integration/replication-buffer [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (3832 ms) [ok]: LATENCY GRAPH can output the expire event graph (1 ms) [ok]: LATENCY of expire events are correctly collected (8579 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [19/91 done]: unit/latency-monitor (12 seconds) Testing integration/shutdown [ok]: Set instance A as slave of B (102 ms) [ok]: INCRBYFLOAT replication, should not remove expire (2 ms) [ok]: GETSET replication (3 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (2 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (444 ms) [ok]: Detect write load to master (1001 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (640 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (37 ms) [ok]: BRPOPLPUSH replication, list exists (1003 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (2 ms) [ok]: All replicas share one global replication buffer (163 ms) [ok]: Replication buffer will become smaller when no replica uses (3 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (1016 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: MASTER and SLAVE consistency with expire (6024 ms) [ok]: Test replication with parallel clients writing in different DBs (5224 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (110 ms) [ok]: BLMOVE (left, left) replication, list exists (1003 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (2323 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (0 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: BLMOVE (left, right) replication, list exists (1003 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (2 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (11239 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (2 ms) [ok]: BLMOVE (right, left) replication, list exists (1004 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (2 ms) [ok]: SRANDMEMBER with a dict containing long chain (15364 ms) [ok]: SMOVE basics - from regular set to intset (4 ms) [ok]: SMOVE basics - from intset to regular set (2 ms) [ok]: SMOVE non existing key (2 ms) [ok]: SMOVE non existing src set (2 ms) [ok]: SMOVE from regular set to non existing destination set (2 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (2 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2224 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: ZSCORE - skiplist (29 ms) [ok]: ZMSCORE - skiplist (28 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (41 ms) [ok]: ZSET sorting stresser - skiplist (60 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1966 ms) [ok]: BLMOVE (right, right) replication, list exists (1003 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2723 ms) [ok]: BLPOP followed by role change, issue #2473 (104 ms) [ok]: {cluster} SCAN regression test for issue #4906 (9248 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (40 ms) [20/91 done]: unit/scan (25 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (0 ms) [ok]: FLUSHDB / FLUSHALL should replicate (95 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Bad format: Server should have logged an error (2 ms) [ok]: Replication of an expired key does not delete the expired key (515 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: Short read: Server should have logged an error (2 ms) [ok]: Short read: Utility should confirm the AOF is not valid (7 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (6 ms) [ok]: Short read: Utility should be able to fix the AOF (7 ms) [ok]: Fixed AOF: Server should have been started (0 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6260 ms) [ok]: First server should have role slave after SLAVEOF (0 ms) [ok]: Shutting down master waits for replica timeout (2211 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: MIGRATE can correctly transfer large values (10090 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: MIGRATE can correctly transfer hashes (217 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (10944 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [21/91 done]: integration/replication-2 (14 seconds) Testing integration/aof-race [ok]: XRANGE fuzzing (13470 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (1 ms) [ok]: Redict should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: XTRIM with MAXLEN option basic test (112 ms) [ok]: XADD with LIMIT consecutive calls (12 ms) [ok]: XTRIM with ~ is limited (13 ms) [ok]: XTRIM without ~ is not limited (14 ms) [ok]: XTRIM without ~ and with LIMIT (14 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: intsets implementation stress testing (3195 ms) [22/91 done]: unit/type/set (28 seconds) Testing integration/aof-multi-part [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (2585 ms) [ok]: MIGRATE timeout actually works (635 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (17 ms) [ok]: LTRIM stress testing - listpack (13000 ms) [ok]: Multi Part AOF can't load data when some file missing (114 ms) [23/91 done]: unit/type/list-2 (28 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (112 ms) [ok]: MIGRATE can migrate multiple keys at once (218 ms) [ok]: MIGRATE with multiple keys must have empty key arg (1 ms) [ok]: Shutting down master waits for replica then fails (1239 ms) [ok]: XADD with MINID > lastid can propagate correctly (20 ms) [ok]: test old version rdb file (0 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (112 ms) [ok]: Slave is able to evict keys created in writable slaves (6002 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (2956 ms) [ok]: Detect write load to master (1001 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (113 ms) [ok]: Writable replica doesn't return expired keys (103 ms) [ok]: PFCOUNT updates cache on readonly replica (2 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (218 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (469 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (13 ms) [24/91 done]: integration/aof-race (1 seconds) Testing integration/corrupt-dump [ok]: RDB encoding loading test (8 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (102 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (112 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (112 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (335 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (217 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (13 ms) [ok]: Server started empty with non-existing RDB file (1 ms) [ok]: corrupt payload: #7445 - with sanitize (219 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (113 ms) [ok]: Shutting down master waits for replica then aborted (519 ms) [25/91 done]: integration/shutdown (9 seconds) Testing integration/corrupt-dump-fuzzer [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (118 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (221 ms) [ok]: XADD with ~ MINID can propagate correctly (16 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (223 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (117 ms) [26/91 done]: integration/replication-3 (13 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Multi Part AOF can't load data when the manifest file is empty (115 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (222 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (17 ms) [ok]: corrupt payload: invalid zlbytes header (233 ms) [27/91 done]: unit/dump (29 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (573 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (37 ms) [ok]: Test RDB stream encoding (130 ms) [ok]: Test RDB stream encoding - sanitize dump (9 ms) [ok]: Multi Part AOF can start when no aof and no manifest (227 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (15 ms) [ok]: corrupt payload: valid zipped hash header, dup records (221 ms) [ok]: Server should not start if RDB file can't be open (1 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (224 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms) [ok]: XADD can CREATE an empty stream (0 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (1 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (1 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (2 ms) [ok]: corrupt payload: quicklist big ziplist prev len (218 ms) [28/91 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [29/91 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/logging [ok]: RDB load ziplist zset: converts to listpack when RDB loading (0 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (226 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (4 ms) [ok]: Maximum XDEL ID behaves correctly (2 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: corrupt payload: quicklist small ziplist prev len (219 ms) [ok]: Crash report generated on SIGABRT (103 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (225 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [ok]: corrupt payload: quicklist ziplist wrong count (218 ms) [30/91 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: Empty stream can be rewrite into AOF correctly (105 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (228 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (106 ms) [ok]: Stacktraces generated on SIGALRM (102 ms) [ok]: corrupt payload: #3080 - quicklist (219 ms) [ok]: Test FLUSHALL aborts bgsave (655 ms) [31/91 done]: integration/logging (1 seconds) Testing integration/psync2-reg [ok]: bgsave resets the change counter (103 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: corrupt payload: quicklist with empty ziplist (218 ms) [32/91 done]: unit/type/stream (29 seconds) Testing integration/psync2-pingoff [ok]: Multi Part AOF can load data from old version redict (rdb preamble no) (336 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (1298 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (3 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (0 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (218 ms) [ok]: Multi Part AOF can load data from old version redict (rdb preamble yes) (326 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (221 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (229 ms) [ok]: corrupt payload: #3080 - ziplist (219 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (111 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (226 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (121 ms) [ok]: client freed during loading (983 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (229 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (1 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (219 ms) [ok]: PSYNC2 #3899 regression: setup (1005 ms) [ok]: PSYNC2 pingoff: setup (1004 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3227 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict1) (106 ms) [ok]: corrupt payload: listpack invalid size header (222 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict2) (106 ms) [ok]: corrupt payload: listpack too long entry len (124 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (636 ms) [ok]: corrupt payload: listpack very long entry len (125 ms) [ok]: Test RDB load info (634 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (2 ms) [ok]: corrupt payload: listpack too long entry prev len (221 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (327 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (2 ms) [ok]: corrupt payload: stream with duplicate consumers (221 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redict starts from empty (234 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: corrupt payload: hash ziplist with duplicate records (221 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redict starts from empty (231 ms) [ok]: failed bgsave prevents writes (341 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1128 ms) [33/91 done]: integration/replication-buffer (14 seconds) Testing integration/psync2-master-restart [34/91 done]: integration/rdb (5 seconds) Testing integration/failover [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: corrupt payload: hash listpack with duplicate records (232 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (126 ms) [ok]: AOF fsync always barrier issue (5261 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: corrupt payload: hash ziplist uneven record count (221 ms) [ok]: GETEX should not append to AOF (1 ms) [ok]: setup replication for following tests (102 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: AOF enable will create manifest file (511 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (9630 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (2 ms) [ok]: BZMPOP with multiple blocked clients (5 ms) [ok]: Unknown command: Server should have logged an error (3 ms) [ok]: corrupt payload: hash duplicate records (221 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: BZMPOP propagate as pop with count command to replica (183 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (3 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (102 ms) [ok]: corrupt payload: hash empty zipmap (224 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (126 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (1 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (125 ms) [ok]: failover command to specific replica works (738 ms) [ok]: Test replication with blocking lists and sorted sets operations (25004 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (221 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (102 ms) [35/91 done]: integration/block-repl (26 seconds) Testing integration/redict-cli [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1117 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (222 ms) [ok]: Interactive CLI: INFO response should be printed raw (62 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: Interactive CLI: Status reply (60 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (221 ms) [ok]: Interactive CLI: Bulk reply (62 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1314 ms) [ok]: Interactive CLI: Multi-bulk reply (60 ms) [ok]: corrupt payload: fuzzer findings - hash crash (219 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Generate timestamp annotations in AOF (325 ms) [ok]: ZSET skiplist order consistency when elements are moved (1340 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (2 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (1 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (1 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (1 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (1 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (13 ms) [ok]: ZRANDMEMBER - skiplist (14 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (1 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (218 ms) [ok]: failover command to any replica works (1034 ms) [ok]: Interactive CLI: Parsing quotes (424 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (490 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (218 ms) [ok]: AOF enable/disable auto gc (207 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (219 ms) [ok]: failover to a replica with force works (432 ms) [ok]: AOF can produce consecutive sequence number after reload (127 ms) [ok]: ZRANDMEMBER with - skiplist (498 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - empty intset (221 ms) [ok]: Interactive CLI: Subscribed mode (606 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (317 ms) [ok]: Truncate AOF to specific timestamp (709 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (222 ms) [ok]: ZRANDMEMBER with - listpack (485 ms) [ok]: zset score double range (1 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (27 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (11 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (2 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (3 ms) [ok]: failover with timeout aborts if replica never catches up (562 ms) [ok]: failovers can be aborted (30 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7920 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (413 ms) [36/91 done]: unit/type/zset (36 seconds) Testing integration/redict-benchmark [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: Non-interactive TTY CLI: Integer reply (1 ms) [ok]: Non-interactive TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (3 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (222 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (12 ms) [ok]: Non-interactive non-TTY CLI: Status reply (2 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (1 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (53 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (4 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (12 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (3 ms) [ok]: benchmark: set,get (6 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (14 ms) [ok]: benchmark: connecting using URI set,get (5 ms) [ok]: benchmark: connecting using URI with authentication set,get (6 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (218 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1118 ms) [ok]: benchmark: full test suite (117 ms) [ok]: AOF will trigger limit when AOFRW fails many times (594 ms) [ok]: failover aborts if target rejects sync request (433 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (225 ms) [ok]: Slave should be able to synchronize with the master (103 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (231 ms) [ok]: benchmark: multi-thread set,get (511 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (221 ms) [ok]: benchmark: pipelined full set,get (254 ms) [ok]: benchmark: arbitrary command (9 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (124 ms) [ok]: benchmark: keyspace length (45 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (4 ms) [ok]: benchmark: read last argument from stdin (11 ms) [37/91 done]: integration/redict-benchmark (1 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - stream integrity check issue (219 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (125 ms) [38/91 done]: integration/failover (4 seconds) Testing unit/pubsub [ok]: Detect write load to master (1002 ms) [ok]: Make the old master a replica of the new one and check conditions (1005 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (1 ms) [ok]: PUBLISH/SUBSCRIBE basics (2 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (3 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (2 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (222 ms) [ok]: PubSub messages with CLIENT REPLY OFF (101 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (1 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: Keyspace notifications: we receive keyspace notifications (46 ms) [ok]: Keyspace notifications: we receive keyevent notifications (49 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (2 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (2 ms) [ok]: Keyspace notifications: stream events test (2 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (222 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (129 ms) [ok]: Keyspace notifications: expired events (triggered expire) (202 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1755 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (222 ms) [ok]: Keyspace notifications: expired events (background expire) (268 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (1 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (2 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [39/91 done]: unit/pubsub (1 seconds) Testing unit/pubsubshard [ok]: corrupt payload: fuzzer findings - valgrind invalid read (222 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (3 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (3 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (10029 ms) [ok]: PubSubShard with CLIENT REPLY OFF (107 ms) [ok]: dismiss all data types memory (1364 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2212 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (221 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (126 ms) [40/91 done]: integration/aof-multi-part (11 seconds) Testing unit/slowlog [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (221 ms) [ok]: setup replication for following tests (101 ms) [ok]: publish message to master and receive on replica (2 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (201 ms) [ok]: SLOWLOG - zero max length is correctly handled (9 ms) [ok]: SLOWLOG - max entries is correctly handled (9 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (3 ms) [ok]: SLOWLOG - RESET subcommand works (1 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (223 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (3 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (2 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (4 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 32931) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: corrupt payload: fuzzer findings - huge string (220 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: Dumping an RDB - functions only: no (3296 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (219 ms) [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (125 ms) [41/91 done]: unit/pubsubshard (2 seconds) Testing unit/scripting [ok]: Redis compatibility global exists (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (1 ms) [ok]: EVAL - Return table with a metatable that call redict (0 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redict API? (0 ms) [ok]: EVAL - Redict integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redict integer conversion (0 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (221 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (2035 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (126 ms) [ok]: SLOWLOG - can be disabled (402 ms) [ok]: SLOWLOG - count must be >= -1 (1 ms) [ok]: SLOWLOG - get all slow logs (4 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (4 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (255 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (2 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: Dumping an RDB - functions only: yes (799 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: redict.sha1hex() implementation (1 ms) [42/91 done]: unit/slowlog (1 seconds) Testing unit/functions [43/91 done]: integration/psync2-master-restart (7 seconds) Testing unit/maxmemory [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (222 ms) [ok]: FUNCTION - Basic usage (1 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (1 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (1 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (1 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (1 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: Scan mode (158 ms) [ok]: FUNCTION - test loading from rdb (10 ms) [ok]: FUNCTION - test debug reload different options (3 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (2 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (2 ms) [ok]: FUNCTION - test function dump and restore with replace argument (1 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (1 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (1 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (1 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (82 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (223 ms) [ok]: corrupt payload: fuzzer findings - empty zset (222 ms) [ok]: FUNCTION - test function kill (407 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (220 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (218 ms) [ok]: FUNCTION - test script kill not working on function (406 ms) [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (1 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (6 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (5543 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (752 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (218 ms) [ok]: EVAL can process writes from AOF in read-only replicas (230 ms) [ok]: Test redict-check-aof for old style resp AOF (7 ms) [ok]: Test redict-check-aof for old style resp AOF - has data in the same format as manifest (7 ms) [ok]: Test redict-check-aof for old style rdb-preamble AOF (7 ms) [ok]: Test redict-check-aof for Multi Part AOF with resp AOF base (7 ms) [ok]: Test redict-check-aof for Multi Part AOF with rdb-preamble AOF base (8 ms) [ok]: Test redict-check-aof for Multi Part AOF contains a format error (6 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in fix mode (14 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (7 ms) [ok]: FUNCTION - test function kill not working on eval (406 ms) [ok]: FUNCTION - test function flush (1 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (220 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (6 ms) [44/91 done]: integration/aof (17 seconds) Testing unit/introspection [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (125 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (15296 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3523 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (2 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (122 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: FUNCTION - creation is replicated to replica (1 ms) [ok]: FUNCTION - call on replica (1 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (223 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Disconnecting the replica from master instance (103 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (225 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (1132 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (81 ms) [ok]: Connecting as a replica (2128 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (221 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (218 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (221 ms) [ok]: EVAL does not leak in the Lua stack (1795 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redict namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (2 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (330 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (222 ms) [45/91 done]: integration/corrupt-dump (15 seconds) Testing unit/introspection-2 [ok]: eviction due to input buffer of a dead client, client eviction: true (771 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (1 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (1 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (1 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redict.call from function load (0 ms) [ok]: LIBRARIES - redict.setresp from function load (0 ms) [ok]: LIBRARIES - redict.set_repl from function load (0 ms) [ok]: Script return recursive object (268 ms) [ok]: LIBRARIES - redict.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (1 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: Script check unpack with massive arguments (30 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (1 ms) [ok]: Test print are not available (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: dismiss client output buffer (5165 ms) [ok]: LIBRARIES - load timeout (503 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (1 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (1 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (1 ms) [ok]: FUNCTION - test function restore with function name collision (3 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (1 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (1 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2002 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (3 ms) [ok]: CLIENT command unhappy path coverage (3 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (404 ms) [ok]: dismiss client query buffer (203 ms) [ok]: CLIENT KILL close the client connection during bgsave (98 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (45 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (1 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (2 ms) [ok]: FUNCTION - redict version api (0 ms) [ok]: FUNCTION - legacy redis version is hard-coded to 7.2.4 (1 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (1 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (1 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (60 ms) [ok]: AOF rewrite during write load: RDB preamble=no (27787 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (50 ms) [ok]: MONITOR can log executed commands (2 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (3 ms) [46/91 done]: unit/functions (4 seconds) Testing unit/limits [ok]: MONITOR correctly handles multi-exec cases (2 ms) [ok]: MONITOR log blocked command only once (4 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT GETNAME check if name set correctly (1 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (1 ms) [ok]: CLIENT SETINFO can set a library name to this connection (0 ms) [ok]: CLIENT SETINFO invalid args (1 ms) [ok]: RESET does NOT clean library name (1 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: Piping raw protocol (1758 ms) [ok]: Options -X with illegal argument (4 ms) [ok]: DUMP RESTORE with -x option (8 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (310 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (1032 ms) [ok]: DUMP RESTORE with -X option (8 ms) [47/91 done]: integration/redict-cli (10 seconds) Testing unit/obuf-limits [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Turning off AOF kills the background writing child if any (105 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: Timedout script does not cause a false dead client (237 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: AOF rewrite of list with listpack encoding, string data (105 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (397 ms) [ok]: Timedout script link is still usable after Lua returns (370 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (336 ms) [ok]: AOF rewrite of list with listpack encoding, int data (105 ms) [ok]: CONFIG save params special case handled properly (876 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: CONFIG sanity (60 ms) [ok]: Check if maxclients works refusing connections (908 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (208 ms) [ok]: AOF rewrite of set with intset encoding, string data (54 ms) [48/91 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: CONFIG REWRITE sanity (250 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: BITCOUNT against wrong type (1 ms) [ok]: dismiss replication backlog (1434 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (1 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (1 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [49/91 done]: integration/dismiss-mem (9 seconds) Testing unit/bitfield [ok]: AOF rewrite of set with hashtable encoding, string data (247 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2921 ms) [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (1 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITFIELD basic INCRBY form (1 ms) [ok]: BITFIELD chaining of multiple commands (1 ms) [ok]: BITFIELD unsigned overflow wrap (1 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (816 ms) [ok]: BITFIELD overflow detection fuzzing (422 ms) [ok]: ziplist implementation: value encoding and backlink (12810 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (524 ms) [ok]: BITCOUNT fuzzing without start/end (839 ms) [ok]: Timedout scripts and unblocked command (1387 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3002 ms) [ok]: AOF rewrite of set with intset encoding, int data (863 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (207 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (5 ms) [50/91 done]: integration/psync2-pingoff (17 seconds) Testing unit/geo [ok]: AOF rewrite of set with hashtable encoding, int data (253 ms) [ok]: BITFIELD overflow wrap fuzzing (672 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (54 ms) [ok]: BITFIELD regression for #3564 (5 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: GEO with wrong type src key (2 ms) [ok]: GEO with non existing src key (1 ms) [ok]: GEO BYLONLAT with empty search (0 ms) [ok]: GEO BYMEMBER with non existing member (1 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: GEOADD update with NX option (1 ms) [ok]: GEOADD update with XX option (1 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (1 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (1 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (1 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (1 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (1 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (1 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (1 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (2 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (1 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (1 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (2 ms) [ok]: GEODIST missing elements (1 ms) [ok]: GEORADIUS STORE option: syntax error (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: GEORANGE STORE option: incompatible options (2 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (2 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (2 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (586 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (1496 ms) [ok]: CONFIG SET with multiple args (2 ms) [ok]: CONFIG SET rollback on set error (3 ms) [ok]: CONFIG SET rollback on apply error (6 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (1 ms) [ok]: CONFIG GET hidden configs (15 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9390 ms) [ok]: redict-server command line arguments - error cases (121 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (337 ms) [ok]: BITFIELD: setup slave (102 ms) [ok]: BITFIELD: write on master, read on slave (2 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (106 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (1 ms) [ok]: redict-server command line arguments - allow passing option name and option value in the same arg (225 ms) [51/91 done]: unit/bitfield (1 seconds) Testing unit/memefficiency [ok]: AOF rewrite of hash with hashtable encoding, int data (316 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: redict-server command line arguments - wrong usage that we support anyway (228 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (58 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (859 ms) [ok]: redict-server command line arguments - allow option value to use the `--` prefix (225 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (307 ms) [ok]: BITCOUNT fuzzing with start/end (1577 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: BITCOUNT with illegal arguments (1 ms) [ok]: BITCOUNT against non-integer value (1 ms) [ok]: BITCOUNT regression test for github issue #582 (1 ms) [ok]: BITCOUNT misaligned prefix (1 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (1 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: redict-server command line arguments - option name and option value in the same arg and `--` prefix (227 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (105 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: redict.replicate_commands() can be issued anywhere now (0 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (217 ms) [ok]: AOF rewrite functions (104 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 60276) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: Detect write load to master (1001 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (221 ms) [ok]: BGREWRITEAOF is refused if already in progress (15 ms) [ok]: Memory efficiency with values in range 32 (1052 ms) [52/91 done]: unit/aofrw (45 seconds) Testing unit/hyperloglog [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10070 ms) [53/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/lazyfree [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (937 ms) [ok]: BITOP and fuzzing (891 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (2 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (2 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (1 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (12 ms) [ok]: Script delete the expired key (4 ms) [ok]: TIME command using cached time (11 ms) [ok]: redict-server command line arguments - save with empty input (1119 ms) [ok]: Script block the time in some expiration related commands (83 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: UNLINK can reclaim memory in background (550 ms) [ok]: redict-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (230 ms) [ok]: Redis compatibility global exists (0 ms) [ok]: Script - disallow write on OOM (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (0 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redict API? (1 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (1 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (1 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redict integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redict integer conversion (1 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (2 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: TOUCH alters the last access time of a key (3002 ms) [ok]: cannot modify protected configuration - no (1 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (1 ms) [ok]: BITOP or fuzzing (799 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (1011 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: cannot modify protected configuration - local (8 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (393 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (33 ms) [ok]: SCRIPTING FLUSH ASYNC (22 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (1 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (1 ms) [ok]: redict.sha1hex() implementation (0 ms) [ok]: Memory efficiency with values in range 64 (1363 ms) [ok]: HyperLogLog self test passes (1310 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (1 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (715 ms) [ok]: lazy free a stream with all types of metadata (146 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [54/91 done]: unit/lazyfree (1 seconds) Testing unit/wait [ok]: BITOP xor fuzzing (673 ms) [ok]: BITOP NOT fuzzing (38 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS against wrong type (1 ms) [ok]: BITPOS will illegal arguments (1 ms) [ok]: BITPOS against non-integer value (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (1 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (1 ms) [ok]: BITPOS bit=0 starting at unaligned address (0 ms) [ok]: BITPOS bit=1 starting at unaligned address (1 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (7 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (2 ms) [ok]: BITPOS bit=0 changes behavior if end is given (1 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (6 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1103 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (2 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (2 ms) [ok]: command stats for MULTI (3 ms) [ok]: command stats for scripts (2 ms) [ok]: COMMAND COUNT get total number of Redict commands (1 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (1 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (1 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (8 ms) [ok]: COMMAND LIST syntax error (1 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (8 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (2 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (1 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (1 ms) [ok]: BLPOP command will not be marked with movablekeys (0 ms) [ok]: PING command will not be marked with movablekeys (1 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (1 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (1 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (2 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (1 ms) [ok]: SORT command is marked with movablekeys (2 ms) [ok]: SORT_RO command is marked with movablekeys (2 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (906 ms) [ok]: MIGRATE command is marked with movablekeys (2 ms) [ok]: GEORADIUS command is marked with movablekeys (2 ms) [ok]: Setup slave (103 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [55/91 done]: unit/introspection-2 (8 seconds) Testing unit/pause [ok]: BITPOS bit=1 fuzzy testing using SETBIT (339 ms) [ok]: Test read commands are not blocked by client pause (2 ms) [ok]: HyperLogLogs are promote from sparse to dense (746 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (0 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (72 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (2 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (1 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: Memory efficiency with values in range 128 (956 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (345 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (102 ms) [ok]: Test write commands are paused by RO (2 ms) [ok]: Test special commands are paused by RO (3 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (2 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (2 ms) [ok]: Test RO scripts are not blocked by pause RO (2 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (2 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: Test multiple clients can be queued up and unblocked (2 ms) [ok]: Test clients with syntax errors will get responses immediately (1 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (551 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: config during loading (1438 ms) [ok]: Test both active and passive expires are skipped during client pause (103 ms) [ok]: Test that client pause starts at the end of a transaction (2 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (1 ms) [ok]: Test when replica paused, offset would not grow (3 ms) [ok]: Test replica offset would grow after unpause (1 ms) [ok]: PSYNC2 #3899 regression: verify consistency (49 ms) [ok]: CONFIG REWRITE handles rename-command properly (348 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1073 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (486 ms) [56/91 done]: unit/pause (1 seconds) Testing unit/querybuf [57/91 done]: unit/bitops (7 seconds) Testing unit/tls [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (1231 ms) [ok]: EVAL does not leak in the Lua stack (1030 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (70 ms) [58/91 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: MGET: mget shouldn't be propagated in Lua (100 ms) [ok]: Memory efficiency with values in range 1024 (1226 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (101 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (0 ms) [ok]: The client is now able to disable tracking (1 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: CONFIG REWRITE handles alias config properly (679 ms) [59/91 done]: unit/introspection (10 seconds) Testing unit/oom-score-adj [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (326 ms) [ok]: CONFIG SET oom-score-adj works as expected (19 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (2 ms) [ok]: Functions in the Redict namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (1 ms) [ok]: CONFIG SET oom score restored on disable (1 ms) [ok]: Script with RESP3 map (2 ms) [ok]: CONFIG SET oom score relative and absolute (1 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [60/91 done]: integration/psync2-reg (22 seconds) Testing unit/shutdown [ok]: PSYNC2: cluster is consistent after failover (1 ms) [61/91 done]: unit/oom-score-adj (1 seconds) Testing unit/networking [ok]: HyperLogLog sparse encoding stress test (1721 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (771 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (117 ms) [ok]: CONFIG SET port number (223 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1103 ms) [ok]: Script return recursive object (403 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (13 ms) [ok]: Script check unpack with massive arguments (31 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on redict table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (1 ms) [ok]: Temp rdb will be deleted in signal handle (86 ms) [ok]: RDB save will be failed in shutdown (3 ms) [ok]: CONFIG SET bind address (380 ms) [ok]: Tracking gets notification of expired keys (1001 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (100 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (1 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (3 ms) [ok]: Clean up rdb same named folder (0 ms) [ok]: Tracking gets notification of lazy expired keys (102 ms) [ok]: HELLO 3 reply is correct (1 ms) [ok]: HELLO without protover (1 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (2 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms) [ok]: Able to redirect to a RESP3 client (2 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (2 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (112 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: Tracking invalidation message of eviction keys should be before response (4 ms) [ok]: Unblocked BLMOVE gets notification after response (2 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (103 ms) [ok]: Tracking gets notification on tracking table key eviction (57 ms) [ok]: Invalidation message received for flushall (3 ms) [ok]: Invalidation message received for flushdb (2 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (404 ms) [ok]: Test ASYNC flushall (4 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (914 ms) [62/91 done]: unit/shutdown (2 seconds) Testing unit/client-eviction [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (197 ms) [ok]: CONFIG SET bind-source-addr (520 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (207 ms) [ok]: Tracking info is correct (6 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (4 ms) [ok]: Regression test for #11715 (3 ms) [ok]: RESP3 based basic invalidation with client reply off (4 ms) [ok]: RESP2 based basic invalidation with client reply off (47 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (4 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (3 ms) [ok]: client evicted due to large argv (142 ms) [ok]: Timedout script does not cause a false dead client (180 ms) [ok]: client evicted due to large query buf (62 ms) [ok]: client evicted due to percentage of maxmemory (15 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1103 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (1 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (14 ms) [ok]: Default bind address configuration handling (214 ms) [63/91 done]: unit/tracking (2 seconds) Testing unit/violations [ok]: Protected mode works as expected (4 ms) [64/91 done]: unit/networking (1 seconds) Testing unit/replybufsize [ok]: SORT adds integer field to list (1 ms) [65/91 done]: unit/violations (0 seconds) Testing unit/cluster/announced-endpoints [ok]: Timedout script link is still usable after Lua returns (403 ms) [ok]: client evicted due to large multi buf (401 ms) [ok]: WAITAOF local copy before fsync (95 ms) [ok]: WAITAOF local copy everysec (0 ms) [ok]: WAITAOF local copy with appendfsync always (1 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (828 ms) [ok]: query buffer resized correctly (2652 ms) [ok]: query buffer resized correctly when not idle (78 ms) [ok]: WAITAOF local if AOFRW was postponed (301 ms) [ok]: client evicted due to watched key list (378 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (2 ms) [ok]: WAITAOF replica copy before fsync (71 ms) [ok]: Timedout scripts and unblocked command (615 ms) [ok]: verify reply buffer limits (655 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (628 ms) [66/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (204 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (5 ms) [ok]: Memory efficiency with values in range 16384 (3035 ms) [67/91 done]: unit/memefficiency (8 seconds) Testing unit/cluster/cli [ok]: Before the replica connects we issue two EVAL commands (0 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Now use EVALSHA against the master, with both SHAs (1 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (627 ms) [ok]: WAITAOF replica copy everysec (818 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (709 ms) [ok]: Client output buffer hard limit is enforced (11753 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: redict.replicate_commands() can be issued anywhere now (0 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1005 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (202 ms) [ok]: client evicted due to pubsub subscriptions (2236 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (639 ms) [ok]: client evicted due to tracking redirection (106 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (14367 ms) [ok]: Test change cluster-announce-bus-port at runtime (202 ms) [ok]: Key lazy expires during key migration (14 ms) [ok]: Coverage: Basic cluster commands (3 ms) [68/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/scripting [ok]: Create 3 node cluster (1930 ms) [ok]: Run blocking command on cluster node3 (0 ms) [ok]: query buffer resized correctly with fat argv (2913 ms) [ok]: Perform a Resharding (5 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 93177) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [69/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/hostnames [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: Verify command got unblocked after resharding (31 ms) [ok]: Wait for cluster to be stable (9 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (3 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [ok]: Test scripting debug protocol parsing (0 ms) [ok]: Test scripting debug lua stack overflow (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9325 ms) [ok]: Lua scripts eviction does not generate many scripts (116 ms) [ok]: Lua scripts eviction is plain LRU (57 ms) [ok]: Lua scripts eviction does not affect script load (187 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [70/91 done]: unit/cluster/misc (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (2 ms) [ok]: TIME command using cached time (10 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2014 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (104 ms) [ok]: Shebang support for lua engine (1 ms) [ok]: Unknown shebang option (0 ms) [ok]: WAITAOF replica copy appendfsync always (1 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (2 ms) [ok]: no-writes shebang flag (0 ms) [ok]: Kill a cluster node and wait for fail state (1376 ms) [ok]: no-writes shebang flag on replica (118 ms) [ok]: Verify command got unblocked after cluster failure (55 ms) [ok]: not enough good replicas (2 ms) [ok]: Detect write load to master (1001 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (10 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (3 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (2 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (106 ms) [ok]: Function no-cluster flag (1 ms) [ok]: Script no-cluster flag (1 ms) [71/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/multi-slot-operations [ok]: PSYNC2: Set #1 to replicate from #3 (1 ms) [ok]: WAITAOF replica copy if replica is blocked (903 ms) [ok]: Slave should be able to synchronize with the master (103 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4247 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (3 ms) [ok]: Set cluster hostnames and verify they are propagated (244 ms) [ok]: PSYNC2: cluster is consistent after failover (9 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1003 ms) [ok]: WAITAOF on promoted replica (1 ms) [ok]: Set cluster human announced nodename and let it propagate (116 ms) [ok]: Update hostnames and make sure they are all eventually propagated (245 ms) [ok]: not enough good replicas state change during long script (1874 ms) [ok]: allow-stale shebang flag (4 ms) [ok]: reject script do not cause a Lua stack leak (19 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (241 ms) [ok]: Detect write load to master (1002 ms) [ok]: Consistent eval error reporting (37 ms) [ok]: LUA redict.error_reply API (1 ms) [ok]: LUA redict.error_reply API with empty string (1 ms) [ok]: LUA redict.status_reply API (1 ms) [ok]: LUA test pcall (1 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (2 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (237 ms) [72/91 done]: unit/scripting (21 seconds) Testing unit/cluster/slot-ownership [ok]: Continuous slots distribution (28 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (3 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (3 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (16 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (1035 ms) [ok]: Test restart will keep hostname information (196 ms) [ok]: Test hostname validation (1 ms) [73/91 done]: unit/cluster/multi-slot-operations (4 seconds) Testing unit/cluster/links [ok]: WAITAOF master that loses a replica and backlog is dropped (2003 ms) [ok]: Functions are added to new node on redict-cli cluster add-node (3046 ms) [74/91 done]: unit/cluster/hostnames (5 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: client evicted due to client tracking prefixes (6626 ms) [ok]: client evicted due to output buf (8 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (1002 ms) [ok]: client no-evict on (113 ms) [ok]: client no-evict off (64 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (109 ms) [ok]: Replication: commands with many arguments (issue #1221) (37321 ms) [ok]: spopwithcount rewrite srem command (126 ms) [ok]: avoid client eviction when client is freed by output buffer limit (208 ms) [ok]: Human nodenames are visible in log messages (3557 ms) [76/91 done]: unit/cluster/human-announced-nodename (7 seconds) [ok]: WAITAOF master isn't configured to do AOF (1003 ms) [ok]: WAITAOF replica isn't configured to do AOF (103 ms) [77/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: Broadcast message across a cluster shard while a cluster link is down (111 ms) [ok]: decrease maxmemory-clients causes client eviction (636 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 114757) (3 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (1 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (1 ms) [ok]: PSYNC2: cluster is consistent after failover (2 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (904 ms) [ok]: evict clients only until below limit (458 ms) [ok]: evict clients in right order (large to small) (542 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (2417 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (6092 ms) [ok]: No response for single command if client output buffer hard limit is enforced (149 ms) [ok]: client total memory grows during client no-evict (146 ms) [ok]: WAITAOF master sends PING after last write (1214 ms) [ok]: client total memory grows during maxmemory-clients disabled (139 ms) [78/91 done]: unit/client-eviction (13 seconds) [ok]: First server should have role slave after SLAVEOF (104 ms) [ok]: ziplist implementation: encoding stress testing (21028 ms) [79/91 done]: unit/type/list-3 (67 seconds) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6364 ms) [ok]: Migrate the last slot away from a node using redict-cli (4168 ms) [ok]: Each node has two links with each peer (22 ms) [ok]: Validate cluster links format (3 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1053 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (49 ms) [ok]: Data divergence can happen under default conditions (794 ms) [ok]: Data divergence is allowed on writable replicas (3 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (67 ms) [ok]: Slave should be able to synchronize with the master (104 ms) [ok]: WAITAOF master client didn't send any write command (1203 ms) [80/91 done]: integration/replication-4 (51 seconds) [ok]: Obuf limit, KEYS stopped mid-run (190 ms) [81/91 done]: unit/obuf-limits (24 seconds) [ok]: Verify that single primary marks replica as failed (3102 ms) [ok]: Detect write load to master (1002 ms) [ok]: WAITAOF master client didn't send any command (1202 ms) [ok]: redict-cli -4 --cluster create using 127.0.0.1 with cluster-port (1939 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 135294) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (3 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (227 ms) [ok]: redict-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (1192 ms) [82/91 done]: integration/psync2 (42 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3329 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (14931 ms) [ok]: redict-cli -4 --cluster create using localhost with cluster-port (1947 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2335 ms) [ok]: redict-cli -4 --cluster add-node using localhost with cluster-port (1192 ms) [83/91 done]: unit/cluster/cli (21 seconds) [ok]: WAITAOF when replica switches between masters, fsync: always (1342 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7792 ms) [ok]: setup replication for following tests (102 ms) [ok]: Verify that multiple primaries mark replica as failed (6161 ms) [84/91 done]: unit/cluster/failure-marking (14 seconds) [ok]: Disconnect link when send buffer limit reached (9582 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (672 ms) [85/91 done]: unit/wait (28 seconds) [ok]: Link memory increases with publishes (677 ms) [ok]: Detect write load to master (1002 ms) [ok]: Link memory resets after publish messages flush (999 ms) [86/91 done]: unit/cluster/links (16 seconds) [ok]: GEOSEARCH fuzzy test - byradius (34335 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (12378 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9402 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9377 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (37 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: GEOSEARCH fuzzy test - bybox (21933 ms) [ok]: GEOSEARCH box edges fuzzy test (54 ms) [87/91 done]: unit/geo (56 seconds) [ok]: Fuzzing dense/sparse encoding: Redict should always detect errors (50822 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (0 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6281 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (5724 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (2410 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (683 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [88/91 done]: unit/hyperloglog (63 seconds) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7862 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9425 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: slave buffer are counted correctly (73124 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (50208 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (1 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (421 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9461 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (1 ms) [ok]: replica buffer don't induce eviction (9120 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (40 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (336 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (327 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (854 ms) [ok]: client tracking don't cause eviction feedback loop (1403 ms) [ok]: propagation with eviction (98 ms) [ok]: Busy script during async loading (878 ms) [ok]: propagation with eviction in MULTI (97 ms) [ok]: lru/lfu value of the key just added (1 ms) [89/91 done]: unit/maxmemory (103 seconds) [ok]: Blocked commands and configs during async-loading (429 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (1 ms) Waiting for process 10549 to exit... Waiting for process 10549 to exit... Waiting for process 10549 to exit... Waiting for process 10549 to exit... [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6274 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7844 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9390 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9516 ms) [90/91 done]: integration/replication-psync (161 seconds) [ok]: diskless loading short read (40667 ms) [ok]: diskless no replicas drop during rdb pipe (7195 ms) [ok]: diskless slow replicas drop during rdb pipe (2863 ms) [ok]: diskless fast replicas drop during rdb pipe (6508 ms) [ok]: diskless all replicas drop during rdb pipe (1868 ms) [ok]: diskless timeout replicas drop during rdb pipe (5166 ms) [ok]: diskless replication child being killed is collected (1439 ms) [ok]: replication child dies when parent is killed - diskless: yes (1183 ms) [ok]: replication child dies when parent is killed - diskless: no (1475 ms) [ok]: diskless replication read pipe cleanup (731 ms) [ok]: replicaof right after disconnection (1837 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (927 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (4 ms) [ok]: Discard cache master before loading transferred RDB when full sync (109 ms) [ok]: replica can handle EINTR if use diskless load (857 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (96 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (150 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (57 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (105 ms) [ok]: PSYNC with wrong offset should throw error (2 ms) [ok]: Test replication with lazy expire (113 ms) [91/91 done]: integration/replication (214 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (1 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (1 seconds) Testing solo test [91/91 done]: defrag (3 seconds) The End Execution time of different units: 1 seconds - unit/info-command 1 seconds - unit/printver 1 seconds - unit/type/incr 1 seconds - unit/protocol 2 seconds - unit/keyspace 2 seconds - unit/auth 3 seconds - unit/info 1 seconds - unit/quit 5 seconds - unit/type/stream-cgroups 5 seconds - unit/multi 1 seconds - unit/acl-v2 2 seconds - unit/acl 9 seconds - unit/type/hash 12 seconds - unit/sort 16 seconds - unit/type/string 17 seconds - unit/type/list 16 seconds - unit/expire 17 seconds - unit/other 12 seconds - unit/latency-monitor 25 seconds - unit/scan 14 seconds - integration/replication-2 28 seconds - unit/type/set 28 seconds - unit/type/list-2 1 seconds - integration/aof-race 9 seconds - integration/shutdown 13 seconds - integration/replication-3 29 seconds - unit/dump 0 seconds - integration/convert-ziplist-hash-on-load 0 seconds - integration/convert-zipmap-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 1 seconds - integration/logging 29 seconds - unit/type/stream 14 seconds - integration/replication-buffer 5 seconds - integration/rdb 26 seconds - integration/block-repl 36 seconds - unit/type/zset 1 seconds - integration/redict-benchmark 4 seconds - integration/failover 1 seconds - unit/pubsub 11 seconds - integration/aof-multi-part 2 seconds - unit/pubsubshard 1 seconds - unit/slowlog 7 seconds - integration/psync2-master-restart 17 seconds - integration/aof 15 seconds - integration/corrupt-dump 4 seconds - unit/functions 10 seconds - integration/redict-cli 1 seconds - unit/limits 9 seconds - integration/dismiss-mem 17 seconds - integration/psync2-pingoff 1 seconds - unit/bitfield 45 seconds - unit/aofrw 20 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/lazyfree 8 seconds - unit/introspection-2 1 seconds - unit/pause 7 seconds - unit/bitops 0 seconds - unit/tls 10 seconds - unit/introspection 22 seconds - integration/psync2-reg 1 seconds - unit/oom-score-adj 2 seconds - unit/shutdown 2 seconds - unit/tracking 1 seconds - unit/networking 0 seconds - unit/violations 1 seconds - unit/replybufsize 8 seconds - unit/memefficiency 3 seconds - unit/cluster/announced-endpoints 6 seconds - unit/querybuf 3 seconds - unit/cluster/misc 2 seconds - unit/cluster/scripting 21 seconds - unit/scripting 4 seconds - unit/cluster/multi-slot-operations 5 seconds - unit/cluster/hostnames 0 seconds - unit/cluster/cluster-response-tls 7 seconds - unit/cluster/human-announced-nodename 4 seconds - unit/cluster/slot-ownership 13 seconds - unit/client-eviction 67 seconds - unit/type/list-3 51 seconds - integration/replication-4 24 seconds - unit/obuf-limits 42 seconds - integration/psync2 21 seconds - unit/cluster/cli 14 seconds - unit/cluster/failure-marking 28 seconds - unit/wait 16 seconds - unit/cluster/links 56 seconds - unit/geo 63 seconds - unit/hyperloglog 103 seconds - unit/maxmemory 161 seconds - integration/replication-psync 214 seconds - integration/replication 1 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 1 seconds - violations 3 seconds - defrag \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict: Entering fakeroot... make -C src install make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' INSTALL redict-sentinel INSTALL redict-check-rdb Hint: It's a good idea to run 'make test' ;) INSTALL redict-server INSTALL redict-benchmark INSTALL redict-cli INSTALL ../redict.conf INSTALL ../sentinel.conf make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict-benchmark*: Running split function benchmark... '/home/buildozer/aports/community/redict/pkg/redict/usr/bin/redict-benchmark' -> '/home/buildozer/aports/community/redict/pkg/redict-benchmark/usr/bin/redict-benchmark' >>> redict-benchmark*: Preparing subpackage redict-benchmark... >>> redict-benchmark*: Stripping binaries >>> redict-benchmark*: Running postcheck for redict-benchmark >>> redict-cli*: Running split function cli... '/home/buildozer/aports/community/redict/pkg/redict/usr/bin/redict-cli' -> '/home/buildozer/aports/community/redict/pkg/redict-cli/usr/bin/redict-cli' >>> redict-cli*: Preparing subpackage redict-cli... >>> redict-cli*: Stripping binaries >>> redict-cli*: Running postcheck for redict-cli >>> redict-compat*: Running split function compat... >>> redict-compat*: Preparing subpackage redict-compat... >>> redict-compat*: Script found. /bin/sh added as a dependency for redict-compat-7.3.0-r3.apk >>> redict-compat*: Adding .pre-install >>> redict-compat*: Running postcheck for redict-compat >>> redict-openrc*: Running split function openrc... >>> redict-openrc*: Preparing subpackage redict-openrc... >>> redict-openrc*: Running postcheck for redict-openrc >>> redict*: Running postcheck for redict >>> redict*: Preparing package redict... >>> redict*: Stripping binaries >>> redict*: Script found. /bin/sh added as a dependency for redict-7.3.0-r3.apk >>> redict*: Adding .post-install >>> redict*: Adding .post-upgrade >>> redict*: Adding .pre-install >>> redict-benchmark*: Scanning shared objects >>> redict-cli*: Scanning shared objects >>> redict-compat*: Scanning shared objects >>> redict-openrc*: Scanning shared objects >>> redict*: Scanning shared objects >>> redict-benchmark*: Tracing dependencies... so:libc.musl-ppc64le.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-benchmark*: Package size: 400.0 KB >>> redict-benchmark*: Compressing data... >>> redict-benchmark*: Create checksum... >>> redict-benchmark*: Create redict-benchmark-7.3.0-r3.apk >>> redict-cli*: Tracing dependencies... so:libc.musl-ppc64le.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-cli*: Package size: 632.0 KB >>> redict-cli*: Compressing data... >>> redict-cli*: Create checksum... >>> redict-cli*: Create redict-cli-7.3.0-r3.apk >>> redict-compat*: Tracing dependencies... !redis !valkey-compat /bin/sh redict-benchmark=7.3.0-r3 redict-cli=7.3.0-r3 redict=7.3.0-r3 >>> redict-compat*: Package size: 12.0 KB >>> redict-compat*: Compressing data... >>> redict-compat*: Create checksum... >>> redict-compat*: Create redict-compat-7.3.0-r3.apk >>> redict-openrc*: Tracing dependencies... >>> redict-openrc*: Package size: 28.0 KB >>> redict-openrc*: Compressing data... >>> redict-openrc*: Create checksum... >>> redict-openrc*: Create redict-openrc-7.3.0-r3.apk >>> redict*: Tracing dependencies... /bin/sh so:libc.musl-ppc64le.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict*: Package size: 3.5 MB >>> redict*: Compressing data... >>> redict*: Create checksum... >>> redict*: Create redict-7.3.0-r3.apk >>> redict: Build complete at Fri, 17 May 2024 21:15:26 +0000 elapsed time 0h 4m 27s >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Uninstalling dependencies... (1/8) Purging .makedepends-redict (20240517.211100) (2/8) Purging linux-headers (6.6-r0) (3/8) Purging openssl-dev (3.3.0-r2) (4/8) Purging tcl (8.6.14-r0) (5/8) Purging tzdata (2024a-r1) (6/8) Purging procps-ng (4.0.4-r0) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r0) Executing busybox-1.36.1-r26.trigger OK: 264 MiB in 110 packages >>> redict: Updating the community/ppc64le repository index... >>> redict: Signing the index...