>>> libtree: Building community/libtree 3.1.0-r0 (using abuild 3.9.0-r0) started Sat, 07 May 2022 19:26:27 +0000
>>> libtree: Checking sanity of /home/buildozer/aports/community/libtree/APKBUILD...
>>> libtree: Analyzing dependencies...
>>> libtree: Installing for build: build-base
(1/1) Installing .makedepends-libtree (20220507.192627)
OK: 255 MiB in 90 packages
>>> libtree: Cleaning up srcdir
>>> libtree: Cleaning up pkgdir
>>> libtree: Fetching https://distfiles.alpinelinux.org/distfiles/v3.16/libtree-3.1.0.tar.gz
>>> libtree: Fetching https://distfiles.alpinelinux.org/distfiles/v3.16/libtree-3.1.0.tar.gz
>>> libtree: Checking sha512sums...
libtree-3.1.0.tar.gz: OK
alpine-exclude_list.patch: OK
>>> libtree: Unpacking /var/cache/distfiles/v3.16/libtree-3.1.0.tar.gz...
>>> libtree: alpine-exclude_list.patch
patching file libtree.c
gcc -Os -fomit-frame-pointer -std=c99 -Wall -Wextra -Wshadow -pedantic -D_FILE_OFFSET_BITS=64 -c libtree.c
gcc  libtree.o -o libtree
for dir in tests/01_origin tests/02_rpath_of_parents_parent tests/03_direct_and_absolute_rpath tests/04_rpath_over_env_over_runpath tests/05_32_bits tests/06_symbol_versions tests/07_origin_is_relative_to_symlink_location_not_realpath tests/08_nodeflib tests/10_rpath_order; do \
	make -C $dir check || break ;\
done
make[1]: Entering directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/01_origin'
echo 'int f(){return 1;}' | gcc -shared -Wl,-soname,liba.so -o liba.so -nostdlib -x c -
echo 'int _start(){return f();}' | gcc -o exe_rpath -Wl,--no-as-needed -Wl,--disable-new-dtags '-Wl,-rpath,$ORIGIN' -Wno-implicit-function-declaration -nostdlib liba.so -x c -
echo 'int _start(){return f();}' | gcc -o exe_runpath -Wl,--no-as-needed -Wl,--enable-new-dtags '-Wl,-rpath,$ORIGIN' -Wno-implicit-function-declaration -nostdlib liba.so -x c -
../../libtree exe_rpath
exe_rpath 
└── liba.so [rpath]
../../libtree exe_runpath
exe_runpath 
└── liba.so [runpath]
make[1]: Leaving directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/01_origin'
make[1]: Entering directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/02_rpath_of_parents_parent'
echo 'int g(){return 1;}' | gcc -shared -Wl,-soname,libb.so -o libb.so -nostdlib -x c -
echo 'int f(){return g();}' | gcc -shared -Wl,--no-as-needed -Wl,-soname,liba.so -o liba.so -Wno-implicit-function-declaration libb.so -nostdlib -x c -
echo 'int _start(){return f();}' | gcc -o exe -Wl,--no-as-needed -Wl,--disable-new-dtags '-Wl,-rpath,$ORIGIN' '-Wl,-rpath-link,/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/02_rpath_of_parents_parent' -Wno-implicit-function-declaration -nostdlib -L. -la -x c -
../../libtree liba.so || true # should not find libb.so
liba.so 
└── libb.so not found
    ┊ Paths considered in this order:
    ┊ 1. rpath:
    ┊ 2. LD_LIBRARY_PATH was not set
    ┊ 3. runpath was not set
    ┊ 4. ld config files:
    ┊ 5. Standard paths:
    ┊    /lib
    ┊    /lib64
    ┊    /usr/lib
    ┊    /usr/lib64
Error [liba.so]: Not all dependencies were found
LD_LIBRARY_PATH=/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/02_rpath_of_parents_parent ../../libtree liba.so  # should find libb.so through LD_LIBRARY_PATH
liba.so 
└── libb.so [LD_LIBRARY_PATH]
../../libtree exe  # should find libb.so through exe's rpath
exe 
└── liba.so [rpath]
    └── libb.so [rpath of 1]
make[1]: Leaving directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/02_rpath_of_parents_parent'
make[1]: Entering directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath'
mkdir some_dir
echo 'int i(){return 1;}' | gcc -shared -Wl,--no-as-needed -o lib_without_soname.so -x c -
echo 'int f(){return 42;}' | gcc -shared -Wl,-soname,lib_f.so -Wl,--no-as-needed -o some_dir/lib_f.so -x c -
echo 'extern int f(); int g(){return f();}' | gcc -shared -Wl,-soname,lib_g.so -Wl,--no-as-needed "-Wl,-rpath,/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/some_dir" -L./some_dir -l_f -o lib_g.so -x c -
echo 'extern int i(); extern int f(); extern int g(); int main(){return f() + g() + i();}' | gcc -Wl,--no-as-needed "-Wl,-rpath,/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/" -L. -L./some_dir -l_f -l_g /home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/lib_without_soname.so -o exe_a -x c -
echo 'extern int i(); extern int f(); extern int g(); int main(){return f() + g() + i();}' | gcc -Wl,--no-as-needed "-Wl,-rpath,/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/" "-Wl,-rpath,/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/some_dir" -L. -L./some_dir -l_f -l_g /home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/lib_without_soname.so -o exe_b -x c -
../../libtree exe_a || true # cannot find lib_f.so
exe_a 
├── /home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/lib_without_soname.so [direct]
├── lib_g.so [rpath]
│   └── lib_f.so [rpath]
└── lib_f.so not found
    ┊ Paths considered in this order:
    ┊ 1. rpath:
    ┊    depth 1
    ┊    /home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/
    ┊ 2. LD_LIBRARY_PATH was not set
    ┊ 3. runpath was not set
    ┊ 4. ld config files:
    ┊ 5. Standard paths:
    ┊    /lib
    ┊    /lib64
    ┊    /usr/lib
    ┊    /usr/lib64
Error [exe_a]: Not all dependencies were found
../../libtree exe_b || true # should find lib_f.so
exe_b 
├── /home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath/lib_without_soname.so [direct]
├── lib_g.so [rpath]
│   └── lib_f.so [rpath]
└── lib_f.so [rpath]
make[1]: Leaving directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/03_direct_and_absolute_rpath'
make[1]: Entering directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/04_rpath_over_env_over_runpath'
echo 'int b(){return 10;}' | gcc -shared -Wl,-soname,libb.so -Wl,--no-as-needed -o libb.so -Wno-implicit-function-declaration -nostdlib -x c -
mkdir dir
echo 'int a(){return 42;}' | gcc -shared -Wl,-soname,liba.so -Wl,--no-as-needed -o dir/liba.so -nostdlib -x c -
echo 'int b(){return a();}' | gcc -shared -Wl,-soname,libb.so -Wl,--no-as-needed -Wl,--disable-new-dtags '-Wl,-rpath,$ORIGIN' -Wno-implicit-function-declaration -o dir/libb.so -nostdlib dir/liba.so -x c -
echo 'int _start(){return b();}' | gcc -Wl,--no-as-needed -Wl,--disable-new-dtags "-Wl,-rpath,/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/04_rpath_over_env_over_runpath" libb.so -o exe_rpath -Wno-implicit-function-declaration -nostdlib -x c -
echo 'int _start(){return b();}' | gcc -Wl,--no-as-needed -Wl,--enable-new-dtags "-Wl,-rpath,/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/04_rpath_over_env_over_runpath" libb.so -o exe_runpath -Wno-implicit-function-declaration -nostdlib -x c -
../../libtree exe_rpath
exe_rpath 
└── libb.so [rpath]
LD_LIBRARY_PATH="/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/04_rpath_over_env_over_runpath/dir" ../../libtree exe_rpath
exe_rpath 
└── libb.so [rpath]
../../libtree exe_runpath
exe_runpath 
└── libb.so [runpath]
LD_LIBRARY_PATH="/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/04_rpath_over_env_over_runpath/dir" ../../libtree exe_runpath
exe_runpath 
└── libb.so [LD_LIBRARY_PATH]
    └── liba.so [rpath]
make[1]: Leaving directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/04_rpath_over_env_over_runpath'
make[1]: Entering directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/05_32_bits'
mkdir -p lib32/
mkdir -p lib64/
echo 'int a(){return 42;}' | gcc -shared -Wl,-soname,libx.so -m32 -o lib32/libx.so -nostdlib -x c -
echo 'int a(){return 42;}' | gcc -shared -Wl,-soname,libx.so -m64 -o lib64/libx.so -nostdlib -x c -
gcc: error: unrecognized command-line option '-m32'; did you mean '-mbe32'?
gcc: error: unrecognized command-line option '-m64'
make[1]: *** [Makefile:16: lib32/libx.so] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile:12: lib64/libx.so] Error 1
make[1]: Leaving directory '/home/buildozer/aports/community/libtree/src/libtree-3.1.0/tests/05_32_bits'
>>> libtree: Entering fakeroot...
mkdir -p /home/buildozer/aports/community/libtree/pkg/libtree/usr/bin
cp -p libtree /home/buildozer/aports/community/libtree/pkg/libtree/usr/bin
mkdir -p /home/buildozer/aports/community/libtree/pkg/libtree/usr/share/man/man1
cp -p doc/libtree.1 /home/buildozer/aports/community/libtree/pkg/libtree/usr/share/man/man1
>>> libtree-doc*: Running split function doc...
>>> libtree-doc*: Preparing subpackage libtree-doc...
>>> libtree-doc*: Running postcheck for libtree-doc
>>> libtree*: Running postcheck for libtree
>>> libtree*: Preparing package libtree...
>>> libtree*: Stripping binaries
>>> libtree-doc*: Scanning shared objects
>>> libtree*: Scanning shared objects
>>> libtree-doc*: Tracing dependencies...
>>> libtree-doc*: Package size: 24.0 KB
>>> libtree-doc*: Compressing data...
>>> libtree-doc*: Create checksum...
>>> libtree-doc*: Create libtree-doc-3.1.0-r0.apk
>>> libtree*: Tracing dependencies...
	so:libc.musl-armv7.so.1
>>> libtree*: Package size: 32.0 KB
>>> libtree*: Compressing data...
>>> libtree*: Create checksum...
>>> libtree*: Create libtree-3.1.0-r0.apk
>>> libtree: Build complete at Sat, 07 May 2022 19:26:30 +0000 elapsed time 0h 0m 3s
>>> libtree: Cleaning up srcdir
>>> libtree: Cleaning up pkgdir
>>> libtree: Uninstalling dependencies...
(1/1) Purging .makedepends-libtree (20220507.192627)
OK: 255 MiB in 89 packages
>>> libtree: Updating the community/armv7 repository index...
>>> libtree: Signing the index...