>>> pdsh: Building community/pdsh 2.34-r0 (using abuild 3.9.0-r0) started Tue, 19 Apr 2022 01:57:41 +0000
>>> pdsh: Checking sanity of /home/buildozer/aports/community/pdsh/APKBUILD...
>>> pdsh: Analyzing dependencies...
>>> pdsh: Installing for build: build-base perl autoconf automake libtool readline-dev ncurses-dev bash
(1/16) Installing libbz2 (1.0.8-r1)
(2/16) Installing perl (5.34.1-r0)
(3/16) Installing m4 (1.4.19-r1)
(4/16) Installing autoconf (2.71-r0)
(5/16) Installing automake (1.16.5-r0)
(6/16) Installing libltdl (2.4.7-r0)
(7/16) Installing libtool (2.4.7-r0)
(8/16) Installing libhistory (8.1.2-r0)
(9/16) Installing ncurses-dev (6.3_p20220416-r0)
(10/16) Installing readline (8.1.2-r0)
(11/16) Installing readline-dev (8.1.2-r0)
(12/16) Installing bash (5.1.16-r2)
Executing bash-5.1.16-r2.post-install
(13/16) Installing .makedepends-pdsh (20220419.015742)
(14/16) Installing perl-error (0.17029-r1)
(15/16) Installing perl-git (2.35.2-r0)
(16/16) Installing git-perl (2.35.2-r0)
Executing busybox-1.35.0-r8.trigger
OK: 370 MiB in 105 packages
>>> pdsh: Cleaning up srcdir
>>> pdsh: Cleaning up pkgdir
>>> pdsh: Fetching https://distfiles.alpinelinux.org/distfiles/v3.16/pdsh-2.34.tar.gz
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  210k  100  210k    0     0   307k      0 --:--:-- --:--:-- --:--:--  307k
>>> pdsh: Fetching https://distfiles.alpinelinux.org/distfiles/v3.16/pdsh-2.34.tar.gz
>>> pdsh: Checking sha512sums...
pdsh-2.34.tar.gz: OK
without-rresvport.patch: OK
fix-test-t6036.patch: OK
>>> pdsh: Unpacking /var/cache/distfiles/v3.16/pdsh-2.34.tar.gz...
>>> pdsh: without-rresvport.patch
patching file src/pdsh/privsep.c
Hunk #1 succeeded at 124 (offset 1 line).
Hunk #2 succeeded at 167 (offset 1 line).
Hunk #3 succeeded at 209 (offset 1 line).
Hunk #4 succeeded at 284 (offset 1 line).
Hunk #5 succeeded at 298 (offset 1 line).
Hunk #6 succeeded at 350 (offset 1 line).
>>> pdsh: fix-test-t6036.patch
patching file tests/t6036-long-output-lines.sh
Running libtoolize --automake --copy ... 
Running autoreconf --verbose --install -I config
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal -I config -I config
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: aclocal -I config -I config
autoreconf: running: /usr/bin/autoconf --include=config
autoreconf: running: /usr/bin/autoheader --include=config
autoreconf: running: automake --add-missing --copy --no-force
configure.ac:36: installing 'config/compile'
configure.ac:16: installing 'config/config.guess'
configure.ac:16: installing 'config/config.sub'
configure.ac:27: installing 'config/install-sh'
configure.ac:27: installing 'config/missing'
autoreconf: Leaving directory '.'
Cleaning up ...
Now run ./configure.
checking build system type... s390x-alpine-linux-musl
checking host system type... s390x-alpine-linux-musl
checking target system type... s390x-alpine-linux-musl
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a race-free mkdir -p... ./config/install-sh -c -d
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a sed that does not truncate output... /bin/sed
checking whether to build with code coverage support... no
checking for s390x-alpine-linux-musl-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
checking whether make supports the include directive... yes (GNU style)
checking dependency style of gcc... gcc3
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking whether debugging is enabled... no
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/s390x-alpine-linux-musl/bin/ld
checking if the linker (/usr/s390x-alpine-linux-musl/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking the maximum length of command line arguments... 98304
checking how to convert s390x-alpine-linux-musl file names to s390x-alpine-linux-musl format... func_convert_file_noop
checking how to convert s390x-alpine-linux-musl file names to toolchain format... func_convert_file_noop
checking for /usr/s390x-alpine-linux-musl/bin/ld option to reload object files... -r
checking for s390x-alpine-linux-musl-file... no
checking for file... file
checking for s390x-alpine-linux-musl-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for s390x-alpine-linux-musl-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for s390x-alpine-linux-musl-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for s390x-alpine-linux-musl-strip... no
checking for strip... strip
checking for s390x-alpine-linux-musl-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for s390x-alpine-linux-musl-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/s390x-alpine-linux-musl/bin/ld -m elf64_s390) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for socket in -lsocket... no
checking for the pthreads library -lpthreads... no
checking whether pthreads work without any flags... yes
checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE
checking if more special flags are required for pthreads... no
checking for fcntl.h... yes
checking for strings.h... (cached) yes
checking for sys/file.h... yes
checking for unistd.h... (cached) yes
checking for features.h... yes
checking for pthread.h... yes
checking for poll.h... yes
checking for sys/poll.h... yes
checking for sys/sysmacros.h,... no
checking for sys/uio.h... yes
checking for socklen_t... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for msg_accrights in struct msghdr... no
checking for gcc options needed to detect all undeclared functions... none needed
checking whether strerror_r is declared... yes
checking whether strerror_r returns char *... no
checking for strerror... yes
checking for pthread_sigmask... yes
checking for sigthreadmask... no
checking for rresvport... no
checking for rresvport_af... no
checking for atoi... yes
checking for poll... yes
checking for default fanout... 32
checking for default connect timeout... 10
checking for whether to build rsh module... no
checking for whether to build xcpu module... no
checking for whether to build ssh module... yes
checking for ssh connect timeout option... -oConnectTimeout=%d
checking for whether to build exec module... yes
checking for krb_sendauth in -lkrb... no
checking for path to machines file... no
checking for whether to build genders module... no
checking for whether to build nodeupdown module... no
checking for whether to build mrsh module... no
checking for whether to build slurm module... no
checking for whether to build torque module... no
checking for whether to build dshgroup module... no
checking for whether to build netgroup module... no
checking for whether to include readline suport... yes
checking for readline in -lreadline... yes
checking if malloc debugging is wanted... no
checking rcmd rank list... "mrsh", "rsh", "ssh", "krb4", "exec", "xcpu"
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config/Makefile
config.status: creating src/Makefile
config.status: creating src/common/Makefile
config.status: creating src/pdsh/Makefile
config.status: creating src/modules/Makefile
config.status: creating doc/Makefile
config.status: creating scripts/Makefile
config.status: creating tests/Makefile
config.status: creating tests/test-modules/Makefile
config.status: creating doc/pdcp.1
config.status: creating doc/pdsh.1
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make  all-recursive
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
Making all in src
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
Making all in common
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
  CC       err.lo
  CC       fd.lo
  CC       hostlist.lo
  CC       list.lo
  CC       split.lo
  CC       xmalloc.lo
  CC       xpoll.lo
  CC       xstring.lo
hostlist.c: In function '_next_tok':
hostlist.c:372:48: warning: comparison between pointer and zero character constant [-Wpointer-compare]
  372 |     while (**str != '\0' && strchr(sep, **str) != '\0')
      |                                                ^~
hostlist.c:372:29: note: did you mean to dereference the pointer?
  372 |     while (**str != '\0' && strchr(sep, **str) != '\0')
      |                             ^
hostlist.c:389:48: warning: comparison between pointer and zero character constant [-Wpointer-compare]
  389 |     while (**str != '\0' && strchr(sep, **str) != '\0')
      |                                                ^~
hostlist.c:389:29: note: did you mean to dereference the pointer?
  389 |     while (**str != '\0' && strchr(sep, **str) != '\0')
      |                             ^
  CC       pipecmd.lo
  CCLD     libcommon.la
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
Making all in modules
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
(echo  "{ global:";                \
 echo "    pdsh_module_info;";     \
 echo "    pdsh_module_priority;"; \
 echo "  local: *;";               \
 echo "};") > version.map
make  all-am
make[4]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
  CC       sshcmd.lo
  CC       execcmd.lo
  CCLD     execcmd.la
  CCLD     sshcmd.la
make[4]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
Making all in pdsh
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
  CC       main.o
  CC       dsh.o
  CC       mod.o
  CC       rcmd.o
  CC       opt.o
  CC       privsep.o
In file included from dsh.c:68:
/usr/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include <sys/poll.h> to <poll.h> [-Wcpp]
    1 | #warning redirecting incorrect #include <sys/poll.h> to <poll.h>
      |  ^~~~~~~
  CC       pcp_server.o
  CC       pcp_client.o
privsep.c: In function 'privsep_rresvport_af':
privsep.c:342:13: warning: implicit declaration of function 'recv_rresvport'; did you mean 'send_rresvport'? [-Wimplicit-function-declaration]
  342 |         s = recv_rresvport (client_fd, lport);
      |             ^~~~~~~~~~~~~~
      |             send_rresvport
  CC       testcase.o
  CC       wcoll.o
  CC       cbuf.o
  CC       config.o
  CC       testconfig.o
  CCLD     pdsh.inst
  CCLD     pdsh
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
Making all in tests
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
Making all in test-modules
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
(echo  "{ global:";                \
 echo "    pdsh_module_info;";     \
 echo "    pdsh_module_priority;"; \
 echo "  local: *;";               \
 echo "};") > version.map
make  all-am
make[4]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[4]: Nothing to be done for 'all-am'.
make[4]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[3]: Nothing to be done for 'all-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
Making all in doc
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
Making all in scripts
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
Making all in config
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
Making check in src
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
Making check in common
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
Making check in modules
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make  check-am
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make[3]: Nothing to be done for 'check-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
Making check in pdsh
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
make[2]: Nothing to be done for 'check'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[2]: Nothing to be done for 'check-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
Making check in tests
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
Making check in test-modules
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make  check-am
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make  a.la b.la pcptest.la
make[4]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
  CC       a.lo
  CC       b.lo
  CC       pcptest.lo
  CCLD     b.la
  CCLD     a.la
  CCLD     pcptest.la
make[4]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make  t0001-basic.sh t0002-internal.sh t0003-wcoll.sh t0004-module-loading.sh t0005-rcmd_type-and-user.sh t0006-pdcp.sh t1001-genders.sh t1002-dshgroup.sh t1003-slurm.sh t2000-exec.sh t2001-ssh.sh t2002-mrsh.sh t5000-dshbak.sh t6036-long-output-lines.sh t6114-no-newline-corruption.sh
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[3]: Nothing to be done for 't0001-basic.sh'.
make[3]: Nothing to be done for 't0002-internal.sh'.
make[3]: Nothing to be done for 't0003-wcoll.sh'.
make[3]: Nothing to be done for 't0004-module-loading.sh'.
make[3]: Nothing to be done for 't0005-rcmd_type-and-user.sh'.
make[3]: Nothing to be done for 't0006-pdcp.sh'.
make[3]: Nothing to be done for 't1001-genders.sh'.
make[3]: Nothing to be done for 't1002-dshgroup.sh'.
make[3]: Nothing to be done for 't1003-slurm.sh'.
make[3]: Nothing to be done for 't2000-exec.sh'.
make[3]: Nothing to be done for 't2001-ssh.sh'.
make[3]: Nothing to be done for 't2002-mrsh.sh'.
make[3]: Nothing to be done for 't5000-dshbak.sh'.
make[3]: Nothing to be done for 't6036-long-output-lines.sh'.
make[3]: Nothing to be done for 't6114-no-newline-corruption.sh'.
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make  check-TESTS
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[4]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
PASS: t0001-basic.sh 1 - working success
PASS: t0003-wcoll.sh 1 - hostname range expansion works
PASS: t0003-wcoll.sh 2 - host range expansion does not strip leading zeros
PASS: t0003-wcoll.sh 3 - host range expansion handles mixed size suffixes
PASS: t0003-wcoll.sh 4 - host range expansion works with "," embedded in range
PASS: t0006-pdcp.sh 1 - Creating pdcp link to pdsh binary
PASS: t0006-pdcp.sh 2 - Creating rpdcp link to pdsh binary
SKIP: t1002-dshgroup.sh - skipping dshgroups tests, dshgroup module not available
PASS: t0006-pdcp.sh 3 - pdcp runs
PASS: t0002-internal.sh 1 - working xstrerrorcat
PASS: t0002-internal.sh 2 - working pipecmd
PASS: t0006-pdcp.sh 4 - rpdcp runs
PASS: t0006-pdcp.sh 5 - pdcp -V works
PASS: t0003-wcoll.sh 5 - host range expansion works with 2 sets of brackets
PASS: t0006-pdcp.sh 6 - pdcp -q works
PASS: t0003-wcoll.sh 6 - pdsh -x option works
PASS: t0006-pdcp.sh 7 - -e sets remote program path
XFAIL: t0001-basic.sh 2 - pretend known breakage # TODO known breakage
PASS: t0001-basic.sh 3 - pretend we have fixed a known breakage (run in sub test-lib)
PASS: t0001-basic.sh 4 - test runs if prerequisite is satisfied
PASS: t0006-pdcp.sh 8 - PDSH_REMOTE_PDCP_PATH sets remote program path
SKIP: t1001-genders.sh - skipping genders tests, genders module not available
PASS: t0003-wcoll.sh 7 - pdsh -x option works with ranges
PASS: t0006-pdcp.sh 9 - -f sets fanout
PASS: t0006-pdcp.sh 10 - -l sets remote username
PASS: t0003-wcoll.sh 8 - pdsh -x option works with ranges (gnats:118)
PASS: t0006-pdcp.sh 11 - -t sets connect timeout
PASS: t0003-wcoll.sh 9 - pdsh -x option works with non-numeric suffix (gnats:120)
PASS: t0006-pdcp.sh 12 - -u sets command timeout
PASS: t0003-wcoll.sh 10 - pdsh -w- reads from stdin
PASS: t0006-pdcp.sh 13 - command timeout 0 by default
PASS: t0004-module-loading.sh 1 - PDSH_MODULE_DIR functionality
PASS: t0003-wcoll.sh 11 - pdsh -w- can be used with other -w args
SKIP: t1003-slurm.sh - skipping slurm tests, slurm module not available
PASS: t0003-wcoll.sh 12 - WCOLL environment variable works
PASS: t0003-wcoll.sh 13 - ranges can be embedded in wcoll files
PASS: t0003-wcoll.sh 14 - ^file works
PASS: t0003-wcoll.sh 15 - -x ^file works
PASS: t0004-module-loading.sh 2 - module A takes precedence over B
PASS: t0003-wcoll.sh 16 - ^file works with other args
PASS: t0003-wcoll.sh 17 - Multiple ^file args
PASS: t0003-wcoll.sh 18 - Multiple -w^file
PASS: t2001-ssh.sh 1 - create ssh dummy script
PASS: t0003-wcoll.sh 19 - -^file excludes hosts in file
PASS: t0004-module-loading.sh 3 - pdsh -M B ativates module B
PASS: t0003-wcoll.sh 20 - ^file errors out if file doesnt exist
PASS: t2001-ssh.sh 2 - ssh module runs
PASS: t0001-basic.sh 5 - tests clean up after themselves
PASS: t0001-basic.sh 6 - tests clean up even on failures
PASS: t0003-wcoll.sh 21 - host exclusion with "-" works
PASS: t2000-exec.sh 1 - exec module works
PASS: t0004-module-loading.sh 4 - PDSH_MISC_MODULES option works
PASS: t0001-basic.sh 7 - pdsh runs
PASS: t0001-basic.sh 8 - pdsh -V works
PASS: t0003-wcoll.sh 22 - regex filtering works
PASS: t0006-pdcp.sh 14 - Have pcptest rcmd module
PASS: t2001-ssh.sh 3 - ssh dummy script works
PASS: t0003-wcoll.sh 23 - regex exclusion works
PASS: t0001-basic.sh 9 - pdsh -L works
PASS: t0001-basic.sh 10 - pdsh -h works
PASS: t2000-exec.sh 2 - exec cmd substitution works
SKIP: t2002-mrsh.sh - skipping mrsh tests, mrsh module not available
PASS: t2000-exec.sh 3 - exec module works in interactive mode
PASS: t0001-basic.sh 11 - rcmd/exec module is built
PASS: t0001-basic.sh 12 - pdsh -N option works
SKIP: t0001-basic.sh 13 # SKIP -u option is functional (missing LONGTESTS)
PASS: t2000-exec.sh 4 - exec cmd susbstitution works interactive mode
PASS: t0001-basic.sh 14 - -f sets fanout
PASS: t0001-basic.sh 15 - -l sets remote username
PASS: t0004-module-loading.sh 5 - -M option overrides PDSH_MISC_MODULES environment var
PASS: t0004-module-loading.sh 6 - pdsh help string correctly displays options of loaded modules
PASS: t0004-module-loading.sh 7 - Loading conflicting module with -M causes error
PASS: t2001-ssh.sh 4 - ssh works with DSHPATH
PASS: t2001-ssh.sh 5 - have ssh connect timeout option
PASS: t0003-wcoll.sh 24 - regex exclusion works from -x
PASS: t0004-module-loading.sh 8 - Conflicting modules dont run init()
PASS: t0001-basic.sh 16 - too long username fails gracefully
PASS: t0001-basic.sh 17 - -t sets connect timeout
PASS: t0003-wcoll.sh 25 - multiple -w options
PASS: t0001-basic.sh 18 - env PDSH_CONNECT_TIMEOUT sets connect timeout
PASS: t2001-ssh.sh 6 - ssh works with connect timeout
PASS: t0004-module-loading.sh 9 - Force loaded module runs init()
PASS: t0003-wcoll.sh 26 - wcoll files support #include syntax
PASS: t0004-module-loading.sh 10 - New conflicting module does not run init() with -M
PASS: t0001-basic.sh 19 - -u sets command timeout
PASS: t0003-wcoll.sh 27 - wcoll #include syntax searches dirname of orignal file
PASS: t0001-basic.sh 20 - env PDSH_COMMAND_TIMEOUT sets command timeout
PASS: t2001-ssh.sh 7 - ssh and pdcp work together
PASS: t0001-basic.sh 21 - command timeout 0 by default
PASS: t2001-ssh.sh 8 - PDSH_SSH_ARGS works
PASS: t0003-wcoll.sh 28 - wcoll #include syntax ignores malformed lines
PASS: t0003-wcoll.sh 29 - wcoll match #include exactly
PASS: t0003-wcoll.sh 30 - wcoll: #include alone fails
PASS: t0001-basic.sh 22 - -b enables batch mode
PASS: t2001-ssh.sh 9 - PDSH_SSH_ARGS does not require %h
PASS: t2001-ssh.sh 10 - PDSH_SSH_ARGS does not require %u
PASS: t0001-basic.sh 23 - pdsh -N option works
PASS: t2001-ssh.sh 11 - PDSH_SSH_ARGS does not force %u when ruser not set (Issue 39)
PASS: t2001-ssh.sh 12 - ssh does not set -l%u by default (Issue 40)
PASS: t5000-dshbak.sh 1 - dshbak functionality
PASS: t2001-ssh.sh 13 - ssh sets -l%u when ruser != luser
PASS: t0006-pdcp.sh 15 - pdcp basic functionality
PASS: t2001-ssh.sh 14 - ssh does not set -l%u when ruser == luser (Issue 40)
PASS: t5000-dshbak.sh 2 - dshbak -c does not coalesce different length output
PASS: t6114-no-newline-corruption.sh 1 - pdsh does not garble 1K with no newline
PASS: t6114-no-newline-corruption.sh 2 - pdsh does not garble 8K with no newline
PASS: t2001-ssh.sh 15 - PDSH_SSH_ARGS without %u inserts %u before %h
PASS: t6114-no-newline-corruption.sh 3 - pdsh does not garble 8K+ with no newline
PASS: t0006-pdcp.sh 16 - rpdcp basic functionality
PASS: t5000-dshbak.sh 3 - dshbak -c properly compresses multi-digit suffixes
PASS: t6036-long-output-lines.sh 1 - pdsh does not truncate very long lines
PASS: t6036-long-output-lines.sh 2 - pdsh does not truncate even longer lines
PASS: t6114-no-newline-corruption.sh 4 - pdsh does not garble 10K with no newline
PASS: t2001-ssh.sh 16 - PDSH_SSH_ARGS does not require %u or %h
PASS: t6114-no-newline-corruption.sh 5 - pdsh labels 1K with no newline only once
PASS: t2001-ssh.sh 17 - PDSH_SSH_ARGS_APPEND works
PASS: t5000-dshbak.sh 4 - dshbak -c properly compresses prefix with embedded numerals
PASS: t2001-ssh.sh 18 - PDSH_SSH_ARGS_APPEND are added to PDSH_SSH_ARGS
PASS: t2001-ssh.sh 19 - interactive mode works with ssh (Issue 14)
PASS: t5000-dshbak.sh 5 - dshbak -c does not strip leading zeros
PASS: t6114-no-newline-corruption.sh 6 - pdsh labels 8K with no newline only once
PASS: t2001-ssh.sh 20 - create ssh dummy script for exit code testing
PASS: t2001-ssh.sh 21 - ssh dummy script is functional
PASS: t6114-no-newline-corruption.sh 7 - pdsh labels 8K+ with no newline only once
PASS: t6114-no-newline-corruption.sh 8 - pdsh labels 10K with no newline only once
PASS: t5000-dshbak.sh 6 - dshbak -c does not coalesce different zero padding
PASS: t0005-rcmd_type-and-user.sh 1 - pdsh -l sets username for all hosts
PASS: t0005-rcmd_type-and-user.sh 2 - Can set remote username via user@hosts
PASS: t5000-dshbak.sh 7 - dshbak -c properly coalesces zero padding of "00"
PASS: t0005-rcmd_type-and-user.sh 3 - user@hosts works for a subset of hosts
PASS: t0006-pdcp.sh 17 - initialize directory tree
PASS: t0005-rcmd_type-and-user.sh 4 - Can set rcmd_type via rcmd_type:hosts
PASS: t0005-rcmd_type-and-user.sh 5 - Can set rcmd_type and user via rcmd_type:user@hosts
PASS: t5000-dshbak.sh 8 - dshbak -c can detect suffixes
XFAIL: t5000-dshbak.sh 9 - dshbak -c can detect suffix with numeral # TODO known breakage
PASS: t5000-dshbak.sh 10 - issue 19: missing commas in dshbak header output
PASS: t5000-dshbak.sh 11 - dshbak properly joins 9,10
PASS: t5000-dshbak.sh 12 - issue 33: dshbak does not coalesce 09,10
PASS: t0006-pdcp.sh 18 - pdcp -r works
PASS: t0006-pdcp.sh 19 - rpdcp -r works
PASS: t5000-dshbak.sh 13 - issue 33: dshbak does not coalesce 099,100
PASS: t5000-dshbak.sh 14 - dshbak -d functionality
PASS: t5000-dshbak.sh 15 - dshbak -f functionality
PASS: t5000-dshbak.sh 16 - dshbak -f without -d fails
PASS: t5000-dshbak.sh 17 - dshbak -d fails when output dir does not exist
PASS: t5000-dshbak.sh 18 - dshbak -d fails gracefully for non-writable dir
PASS: t5000-dshbak.sh 19 - Issue 70: dshbak fails on hostname of 0
PASS: t2001-ssh.sh 22 - ssh works with pdsh -S
PASS: t2001-ssh.sh 23 - ssh works with pdsh -S and multiple targets
============================================================================
Testsuite summary for pdsh 2.34
============================================================================
# TOTAL: 149
# PASS:  142
# SKIP:  5
# XFAIL: 2
# FAIL:  0
# XPASS: 0
# ERROR: 0
============================================================================
make[4]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
Making check in doc
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
make[1]: Nothing to be done for 'check'.
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
Making check in scripts
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
make[1]: Nothing to be done for 'check'.
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
Making check in config
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[1]: Nothing to be done for 'check'.
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
>>> pdsh: Entering fakeroot...
Making install in src
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
Making install in common
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/common'
Making install in modules
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make  install-am
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make[4]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make[4]: Nothing to be done for 'install-data-am'.
 ../.././config/install-sh -c -d '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/lib/pdsh'
 /bin/sh ../../libtool   --mode=install /usr/bin/install -c   sshcmd.la execcmd.la '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/lib/pdsh'
libtool: install: /usr/bin/install -c .libs/sshcmd.so /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/lib/pdsh/sshcmd.so
libtool: install: /usr/bin/install -c .libs/sshcmd.lai /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/lib/pdsh/sshcmd.la
libtool: install: /usr/bin/install -c .libs/execcmd.so /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/lib/pdsh/execcmd.so
libtool: install: /usr/bin/install -c .libs/execcmd.lai /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/lib/pdsh/execcmd.la
libtool: warning: remember to run 'libtool --finish /usr/lib/pdsh'
make[4]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/modules'
Making install in pdsh
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
 ../.././config/install-sh -c -d '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin'
make[3]: Nothing to be done for 'install-data-am'.
  /bin/sh ../../libtool   --mode=install /usr/bin/install -c pdsh.inst '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin'
libtool: install: /usr/bin/install -c pdsh.inst /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin/pdsh.inst
make  install-exec-hook
make[4]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
mv /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin/pdsh.inst /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin/pdsh
chown root /home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin/pdsh
make[4]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src/pdsh'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/src'
Making install in tests
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
Making install in test-modules
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make  install-am
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[4]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[4]: Nothing to be done for 'install-exec-am'.
make[4]: Nothing to be done for 'install-data-am'.
make[4]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests/test-modules'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[3]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/tests'
Making install in doc
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
make[2]: Nothing to be done for 'install-exec-am'.
/usr/bin/install -c -d -m 0755 "/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/share/man/man1"
ln -f -s pdcp.1 "/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/share/man/man1/rpdcp.1"
 .././config/install-sh -c -d '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/share/man/man1'
 /usr/bin/install -c -m 644 pdsh.1 pdcp.1 dshbak.1 '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/share/man/man1'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/doc'
Making install in scripts
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
 .././config/install-sh -c -d '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin'
make[2]: Nothing to be done for 'install-data-am'.
 /usr/bin/install -c dshbak '/home/buildozer/aports/community/pdsh/pkg/pdsh/usr/bin'
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/scripts'
Making install in config
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34/config'
make[1]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
make[2]: Entering directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
make[1]: Leaving directory '/home/buildozer/aports/community/pdsh/src/pdsh-pdsh-2.34'
>>> pdsh-doc*: Running split function doc...
>>> pdsh-doc*: Preparing subpackage pdsh-doc...
>>> pdsh-doc*: Running postcheck for pdsh-doc
>>> pdsh-rcmd-ssh*: Running split function _rcmd_ssh...
>>> pdsh-rcmd-ssh*: Preparing subpackage pdsh-rcmd-ssh...
>>> pdsh-rcmd-ssh*: Stripping binaries
>>> pdsh-rcmd-ssh*: Running postcheck for pdsh-rcmd-ssh
>>> pdsh*: Running postcheck for pdsh
>>> pdsh*: Preparing package pdsh...
>>> pdsh*: Stripping binaries
>>> pdsh-doc*: Scanning shared objects
>>> pdsh-rcmd-ssh*: Scanning shared objects
>>> pdsh*: Scanning shared objects
>>> pdsh-doc*: Tracing dependencies...
>>> pdsh-doc*: Package size: 36.0 KB
>>> pdsh-doc*: Compressing data...
>>> pdsh-doc*: Create checksum...
>>> pdsh-doc*: Create pdsh-doc-2.34-r0.apk
>>> pdsh-rcmd-ssh*: Tracing dependencies...
	pdsh
	openssh-client
	so:libc.musl-s390x.so.1
>>> pdsh-rcmd-ssh*: Package size: 36.0 KB
>>> pdsh-rcmd-ssh*: Compressing data...
>>> pdsh-rcmd-ssh*: Create checksum...
>>> pdsh-rcmd-ssh*: Create pdsh-rcmd-ssh-2.34-r0.apk
>>> pdsh*: Tracing dependencies...
	perl
	so:libc.musl-s390x.so.1
	so:libreadline.so.8
>>> pdsh*: Package size: 416.0 KB
>>> pdsh*: Compressing data...
>>> pdsh*: Create checksum...
>>> pdsh*: Create pdsh-2.34-r0.apk
>>> pdsh: Build complete at Tue, 19 Apr 2022 01:57:59 +0000 elapsed time 0h 0m 18s
>>> pdsh: Cleaning up srcdir
>>> pdsh: Cleaning up pkgdir
>>> pdsh: Uninstalling dependencies...
(1/16) Purging .makedepends-pdsh (20220419.015742)
(2/16) Purging autoconf (2.71-r0)
(3/16) Purging m4 (1.4.19-r1)
(4/16) Purging automake (1.16.5-r0)
(5/16) Purging libtool (2.4.7-r0)
(6/16) Purging libltdl (2.4.7-r0)
(7/16) Purging readline-dev (8.1.2-r0)
(8/16) Purging libhistory (8.1.2-r0)
(9/16) Purging ncurses-dev (6.3_p20220416-r0)
(10/16) Purging bash (5.1.16-r2)
Executing bash-5.1.16-r2.pre-deinstall
(11/16) Purging git-perl (2.35.2-r0)
(12/16) Purging perl-git (2.35.2-r0)
(13/16) Purging perl-error (0.17029-r1)
(14/16) Purging perl (5.34.1-r0)
(15/16) Purging libbz2 (1.0.8-r1)
(16/16) Purging readline (8.1.2-r0)
Executing busybox-1.35.0-r8.trigger
OK: 324 MiB in 89 packages
>>> pdsh: Updating the community/s390x repository index...
>>> pdsh: Signing the index...