>>> redict: Building community/redict 7.3.0-r2 (using abuild 3.13.0-r3) started Mon, 06 May 2024 00:40:30 +0000 >>> redict: Checking sanity of /home/buildozer/aports/community/redict/APKBUILD... >>> redict: Analyzing dependencies... >>> redict: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r0) (2/8) Installing openssl-dev (3.3.0-r1) (3/8) Installing tzdata (2024a-r1) (4/8) Installing tcl (8.6.14-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r0) (7/8) Installing procps-ng (4.0.4-r0) (8/8) Installing .makedepends-redict (20240506.004030) Executing busybox-1.36.1-r26.trigger OK: 772 MiB in 146 packages >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Cleaning up tmpdir >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redict-7.3.0.tar.gz >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/redict-7.3.0.tar.gz >>> redict: Checking sha512sums... redict-7.3.0.tar.gz: OK redict.conf.patch: OK sentinel.conf.patch: OK redict.initd: OK redict.confd: OK redict-sentinel.initd: OK redict.logrotate: OK >>> redict: Unpacking /var/cache/distfiles/redict-7.3.0.tar.gz... >>> redict: redict.conf.patch patching file redict.conf Hunk #1 succeeded at 153 (offset 41 lines). Hunk #2 succeeded at 304 (offset 63 lines). Hunk #3 succeeded at 322 (offset 63 lines). Hunk #4 succeeded at 334 (offset 64 lines). Hunk #5 succeeded at 489 (offset 67 lines). >>> redict: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). make -C src all make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep rm -rf redict-server redict-sentinel redict-cli redict-benchmark redict-check-rdb redict-check-aof *.o *.gcda *.gcno *.gcov redict.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d quicklist.d ae.d anet.d dict.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redict-check-rdb.d redict-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redict-cli.d zmalloc.d release.d ae.d redictassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redict-benchmark.d adlist.d dict.d zmalloc.d redictassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDICT_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 -flto=auto -fno-omit-frame-pointer >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDICT_CFLAGS= >> .make-settings echo REDICT_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDICT_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -I../deps/hiredict -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredict linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredict cd hiredict && make static USE_SSL=1 MAKE linenoise cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2" MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -c fpconv_dtoa.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lapi.o lapi.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lfunc.o lfunc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic hiredict.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lopcodes.o lopcodes.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstring.o lstring.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltable.o ltable.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -funwind-tables -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ar rcs libhiredict.a alloc.o net.o hiredict.o sds.o async.o read.o sockcompat.o ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm ar rcs libhiredict_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' CC threads_mngr.o CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC kvstore.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC cluster_legacy.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redict-check-rdb.o CC redict-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redict-cli.o CC redictassert.o CC cli_common.o CC cli_commands.o CC redict-benchmark.o LINK redict-benchmark LINK redict-cli LINK redict-server INSTALL redict-sentinel INSTALL redict-check-rdb INSTALL redict-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' make -C src test make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep CC release.o LINK redict-server LINK redict-cli LINK redict-benchmark INSTALL redict-check-aof Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 20306 Testing unit/printver [ready]: 20305 Testing unit/dump [ready]: 20307 Testing unit/auth [ready]: 20308 Testing unit/protocol [ready]: 20309 Testing unit/keyspace [ready]: 20310 Testing unit/scan [ready]: 20311 Testing unit/info [ready]: 20312 Testing unit/info-command [ready]: 20313 Testing unit/type/string [ready]: 20314 Testing unit/type/incr [ready]: 20315 Testing unit/type/list [ready]: 20316 Testing unit/type/list-2 [ready]: 20317 Testing unit/type/list-3 [ready]: 20318 Testing unit/type/set [ready]: 20319 Testing unit/type/zset [ready]: 20320 Testing unit/type/hash Testing Redict version 7.3.0 (00000000) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms) [ok]: INCR against non existing key (0 ms) [ok]: SET and GET an item (0 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: Explicit regression for a list bug (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: SET and GET an empty item (0 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (0 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: RESTORE can set an absolute expire (0 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: INCR over 32bit value (0 ms) [ok]: RESTORE with ABSTTL in the past (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: INCR fails against key with spaces (left) (1 ms) [ok]: info command with at most one sub command (2 ms) [ok]: packed node check compression with insert and pop (2 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: info command with one sub-section (0 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: packed node check compression combined with trim (0 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: HSET/HLEN - Small hash creation (1 ms) [ok]: RESTORE can set LFU (0 ms) [ok]: info command with multiple sub-sections (0 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: packed node check compression with lset (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: Check encoding - listpack (0 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (0 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: ZSET basic ZADD and score update - listpack (0 ms) [ok]: INCR uses shared objects in the 0-9999 range (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (1 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: INCRBYFLOAT against non existing key (0 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: INCRBYFLOAT over 32bit value (1 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: DEL against a single item (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: Vararg DEL (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (1 ms) [ok]: Untagged multi-key commands (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: KEYS with pattern (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (0 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: KEYS to get all keys (0 ms) [ok]: DBSIZE (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: string to double with null terminator (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: No negative zero (0 ms) [ok]: KEYS with hashtag (1 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (1 ms) [ok]: DEL all keys (1 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: HRANDFIELD - listpack (4 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: incr operation should update encoding from raw to int (0 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: ZADD INCR LT/GT with inf - listpack (1 ms) [ok]: incrby operation should update encoding from raw to int (0 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (0 ms) [ok]: decrby operation should update encoding from raw to int (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZINCRBY against invalid incr value - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (0 ms) [ok]: ZREM variadic version - listpack (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: ZRANGE basics - listpack (1 ms) [ok]: ZREVRANGE basics - listpack (1 ms) [ok]: HRANDFIELD - hashtable (4 ms) [ok]: ZRANK/ZREVRANK basics - listpack (1 ms) [ok]: HRANDFIELD with RESP3 (0 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (0 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (0 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (3 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (1 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (1 ms) [ok]: ZLEXCOUNT advanced - listpack (0 ms) [ok]: ZRANGEBYLEX with LIMIT - listpack (3 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (7 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: SADD against non set (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (2 ms) [ok]: SADD a non-integer against a large intset (6 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: ZREMRANGEBYLEX basics - listpack (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: Handle an empty query (42 ms) [ok]: SADD an integer larger than 64 bits to a large intset (5 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (0 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (1 ms) [ok]: {standalone} SCAN basic (48 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: Very big payload in GET/SET (41 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: ZDIFF algorithm 1 - listpack (0 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (21 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (6 ms) [ok]: Negative multibulk length (47 ms) [ok]: Out of range multibulk length (0 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (92 ms) [ok]: DUMP of non existing key returns nil (0 ms) [1/91 done]: unit/printver (1 seconds) Testing unit/type/stream [ok]: {standalone} SCAN COUNT (52 ms) [2/91 done]: unit/info-command (1 seconds) Testing unit/type/stream-cgroups [ok]: HRANDFIELD with - hashtable (91 ms) [3/91 done]: unit/type/incr (1 seconds) Testing unit/sort [ok]: latencystats: disable/enable (2 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (47 ms) [ok]: latencystats: configure percentiles (1 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (0 ms) [ok]: latencystats: bad configure percentiles (2 ms) [ok]: latencystats: blocking commands (1 ms) [ok]: latencystats: subcommands (0 ms) [ok]: Protocol desync regression test #1 (31 ms) [ok]: Regression for quicklist #3343 bug (130 ms) [ok]: {standalone} SCAN MATCH (42 ms) [ok]: Protocol desync regression test #2 (31 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (43 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (0 ms) [ok]: latencystats: measure latency (51 ms) [ok]: Check compression with recompress (43 ms) [ok]: errorstats: failed call authentication error (1 ms) [ok]: errorstats: failed call within MULTI/EXEC (2 ms) [ok]: errorstats: failed call within LUA (1 ms) [ok]: errorstats: failed call NOSCRIPT error (1 ms) [ok]: errorstats: failed call NOGROUP error (0 ms) [ok]: errorstats: rejected call unknown command (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: Protocol desync regression test #3 (29 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (0 ms) [ok]: RESP3 attributes on RESP2 (1 ms) [ok]: test big number parsing (0 ms) [ok]: errorstats: blocking commands (1 ms) [ok]: test bool parsing (0 ms) [ok]: test verbatim str parsing (1 ms) [ok]: HRANDFIELD with - listpack (89 ms) [ok]: test large number of args (21 ms) [ok]: test argument rewriting - issue 9598 (1 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: XADD IDs are incremental (0 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: {standalone} SCAN TYPE (75 ms) [ok]: XADD 0-* should succeed (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (1 ms) [ok]: XREADGROUP can read the history of the elements we own (0 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (1 ms) [ok]: XPENDING only group (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (0 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (1 ms) [ok]: XPENDING with IDLE (20 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (0 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (0 ms) [ok]: Set encoding after DEBUG RELOAD (81 ms) [ok]: SREM basics - $type (0 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (1 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (0 ms) [ok]: SREM basics - $type (6 ms) [ok]: SREM basics - intset (0 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: HSET/HLEN - Big hash creation (62 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (0 ms) [ok]: {standalone} SCAN unknown type (43 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (21 ms) [ok]: Blocking XREADGROUP: key deleted (0 ms) [ok]: errorstats: limit errors will not increase indefinitely (80 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (0 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (0 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: XADD with MAXLEN option (54 ms) [ok]: Blocking XREAD: key deleted (1 ms) [ok]: Blocking XREAD: key type changed with SET (0 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (2 ms) [ok]: SUNION with two sets - regular (5 ms) [ok]: SUNIONSTORE with two sets - regular (5 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: SUNION with non existing keys - regular (5 ms) [ok]: SDIFF with two sets - regular (0 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (4 ms) [ok]: HGET against the big hash (43 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: {standalone} SCAN with expired keys (50 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (39 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (1 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (2 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: MIGRATE is caching connections (223 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (1 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (0 ms) [ok]: XADD with MAXLEN option and the '=' argument (54 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (2 ms) [ok]: SUNION with two sets - intset (5 ms) [ok]: SUNIONSTORE with two sets - intset (5 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (4 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: plain node check compression with insert and pop (344 ms) [ok]: HMSET - big hash (54 ms) [ok]: HMGET against non existing key and fields (1 ms) [ok]: Hash commands against wrong type (1 ms) [ok]: HMGET - small hash (0 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (12 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (50 ms) [ok]: SUNION hashtable and listpack (1 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (0 ms) [ok]: {standalone} SSCAN with encoding intset (1 ms) [ok]: Quicklist: SORT BY key (9 ms) [ok]: {standalone} SSCAN with encoding listpack (1 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: {standalone} SSCAN with encoding hashtable (3 ms) [ok]: {standalone} HSCAN with encoding listpack (1 ms) [ok]: Quicklist: SORT BY hash field (8 ms) [ok]: XADD with MAXLEN option and the '~' argument (48 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: stats: eventloop metrics (111 ms) [ok]: Crash due to wrongly recompress after lrem (217 ms) [ok]: HMGET - big hash (52 ms) [ok]: HKEYS - small hash (0 ms) [ok]: HKEYS - big hash (8 ms) [ok]: HVALS - small hash (0 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: XADD with MINID option (54 ms) [ok]: HVALS - big hash (1 ms) [ok]: HGETALL - small hash (1 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (44 ms) [ok]: {standalone} HSCAN with encoding hashtable (70 ms) [ok]: {standalone} ZSCAN with encoding listpack (1 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: HGETALL - big hash (26 ms) [ok]: HGETALL against non-existing key (0 ms) [ok]: HDEL and return value (0 ms) [ok]: HDEL - more than a single value (0 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (0 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (1 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (0 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (1 ms) [ok]: HINCRBY against hash key originally set with HSET (0 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: plain node check compression combined with trim (129 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (43 ms) [ok]: HSTRLEN against the big hash (40 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: {standalone} ZSCAN with encoding skiplist (65 ms) [ok]: HSTRLEN corner cases (1 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: {standalone} SCAN guarantees check under write load (12 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: {standalone} SSCAN with PATTERN (1 ms) [ok]: {standalone} HSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with NOVALUES (0 ms) [ok]: {standalone} ZSCAN with PATTERN (0 ms) [ok]: Hash fuzzing #1 - 10 fields (15 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: Hash fuzzing #2 - 10 fields (11 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (43 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: plain node check compression with lset (173 ms) [ok]: Test LPUSH and LPOP on plain nodes (2 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: Test LSET with packed / plain combinations (89 ms) [ok]: Test LSET with packed is split in the middle (1 ms) [ok]: Test LSET with packed consist only one item (172 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: Test LPUSH and LPOP on plain nodes (1 ms) [ok]: Test LINDEX and LINSERT on plain nodes (0 ms) [ok]: Test LTRIM on plain nodes (0 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: DEL against expired key (1100 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (0 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (1 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (0 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (0 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (0 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (0 ms) [ok]: COPY for string does not copy data to no-integer DB (1 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (0 ms) [ok]: COPY basic usage for list - quicklist (45 ms) [ok]: COPY basic usage for list - listpack (0 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (0 ms) [ok]: COPY basic usage for $type set (9 ms) [ok]: COPY basic usage for listpack sorted set (0 ms) [ok]: COPY basic usage for skiplist sorted set (6 ms) [ok]: COPY basic usage for listpack hash (0 ms) [ok]: COPY basic usage for hashtable hash (9 ms) [ok]: COPY basic usage for stream (60 ms) [ok]: COPY basic usage for stream-cgroups (5 ms) [ok]: MOVE basic usage (0 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (4 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (1 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (1 ms) [ok]: Coverage: SWAPDB and FLUSHDB (0 ms) [ok]: Test LSET with packed / plain combinations (182 ms) [ok]: Test LSET with packed is split in the middle (0 ms) [5/91 done]: unit/keyspace (2 seconds) Testing unit/other [ok]: Hash fuzzing #1 - 512 fields (829 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1096 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (2 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: Coverage: HELP commands (1 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: SAVE - make sure there are all the types as values (1 ms) [ok]: Test LSET with packed consist only one item (176 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: MASTERAUTH test with binary password (906 ms) [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: LPOS basic usage - quicklist (44 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: MULTI / EXEC basics (0 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (0 ms) [ok]: WATCH inside MULTI is not allowed (1 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (0 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (1 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (0 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (89 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: FUZZ stresser with data model binary (386 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (43 ms) [ok]: LPOS basic usage - listpack (0 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (1 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (0 ms) [ok]: BLPOP: single existing list - quicklist (41 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (2 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (2 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (2 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (0 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (0 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (0 ms) [ok]: SWAPDB is able to touch the watched keys that exist (0 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: Very big payload random access (1834 ms) [ok]: SWAPDB does not touch watched stale keys (2 ms) [ok]: Hash fuzzing #2 - 512 fields (524 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (2 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (0 ms) [ok]: BLPOP: multiple existing lists - quicklist (87 ms) [ok]: stats: instantaneous metrics (1603 ms) [ok]: BLPOP: second list has an entry - quicklist (43 ms) [ok]: XCLAIM can claim PEL items from another consumer (603 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (43 ms) [ok]: stats: debug metrics (112 ms) [ok]: stats: client input and output buffer limit disconnections (15 ms) [ok]: clients: pubsub clients (1 ms) [ok]: clients: watching clients (5 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (87 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (43 ms) [ok]: FUZZ stresser with data model alpha (398 ms) [ok]: BRPOPLPUSH - quicklist (44 ms) [ok]: Big Quicklist: SORT BY key (567 ms) [ok]: Big Quicklist: SORT BY key with limit (11 ms) [ok]: BLMOVE left left - quicklist (43 ms) [ok]: XADD mass insertion and XLEN (1837 ms) [ok]: XADD with ID 0-0 (0 ms) [ok]: XADD with LIMIT delete entries no more than limit (0 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (0 ms) [ok]: BLMOVE left right - quicklist (43 ms) [ok]: BLMOVE right left - quicklist (44 ms) [ok]: ZDIFF fuzzing - listpack (2309 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (1 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (1 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (0 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (1 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (1 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (1 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZINCRBY against invalid incr value - skiplist (1 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (1 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (1 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (0 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: BLMOVE right right - quicklist (43 ms) [ok]: ZINCRBY - increment and decrement - skiplist (0 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: BLPOP: single existing list - listpack (1 ms) [ok]: BLPOP: multiple existing lists - listpack (1 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (3 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (0 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (0 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (3 ms) [ok]: BRPOPLPUSH - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: BLMOVE left left - listpack (1 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (2 ms) [ok]: BLMOVE right left - listpack (0 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (2 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (0 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (4 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (2 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: ZUNIONSTORE basics - skiplist (0 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (1 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (1 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: BLMPOP with multiple blocked clients (3 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: Linked LMOVEs (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (1 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (1 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: XCLAIM without JUSTID increments delivery count (401 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (0 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (3 ms) [7/91 done]: unit/info (3 seconds) Testing unit/quit [ok]: XRANGE can be used to iterate the whole stream (296 ms) [ok]: FUZZ stresser with data model compr (367 ms) [ok]: XCLAIM same consumer (201 ms) [ok]: QUIT returns OK (0 ms) [ok]: Pipelined commands after QUIT must not be executed (0 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: SDIFF fuzzing (2304 ms) [ok]: SDIFF against non-set should throw error (0 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (0 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (781 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (1 ms) [ok]: SINTER with same integer elements but different encoding (0 ms) [ok]: SINTERSTORE against non-set should throw error (1 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (0 ms) [ok]: SUNION against non-set should throw error (1 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (1 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (0 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (4 ms) [ok]: SPOP basics - intset (0 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: SRANDMEMBER - intset (4 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (1 ms) [ok]: SPOP with - intset (2 ms) [ok]: SPOP with - hashtable (2 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (1 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (1 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (1 ms) [ok]: SPOP new implementation: code path #3 intset (1 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: SPOP new implementation: code path #2 listpack (1 ms) [ok]: SPOP new implementation: code path #3 listpack (1 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (4 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (823 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (0 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: SRANDMEMBER with - listpack (12 ms) [ok]: SRANDMEMBER with - intset (11 ms) [ok]: SRANDMEMBER with - hashtable (11 ms) [8/91 done]: unit/quit (0 seconds) Testing unit/aofrw [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (1 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: Hash ziplist of various encodings (89 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: SRANDMEMBER histogram distribution - listpack (47 ms) [ok]: Big Quicklist: SORT BY hash field (573 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [9/91 done]: unit/type/hash (3 seconds) Testing unit/acl [ok]: SRANDMEMBER histogram distribution - intset (46 ms) [ok]: BGSAVE (53 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (47 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (1 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (0 ms) [ok]: By default, only default user is not able to publish to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: By default, only default user is able to subscribe to any shard channel (0 ms) [ok]: By default, only default user is able to subscribe to any pattern (0 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (0 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: It's possible to allow subscribing to a subset of channels (0 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (0 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (0 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (1 ms) [ok]: blocked command gets rejected when reprocessed after permission change (1 ms) [ok]: Users can be configured to authenticate with any password (1 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: ACLs can include or exclude whole classes of commands (0 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: ACLs can exclude single subcommands, case 2 (0 ms) [ok]: ACLs cannot include a subcommand with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (0 ms) [ok]: ACLs can block all DEBUG subcommands except one (0 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: Hash table: SORT BY key (9 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (2 ms) [ok]: Hash table: SORT BY key with limit (1 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (0 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: Hash table: SORT BY hash field (9 ms) [ok]: ACL GETUSER provides reasonable results (8 ms) [ok]: ACL GETUSER provides correct results (3 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (1 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (1 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (3 ms) [ok]: ACL LOG shows failed command executions at toplevel (0 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (0 ms) [ok]: ACL LOG is able to log keys access violations and key name (0 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (0 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (1 ms) [ok]: ACL LOG can log failed auth attempts (0 ms) [ok]: ACLLOG - zero max length is correctly handled (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (1 ms) [ok]: ACL LOG entries are still present on update of max len config (1 ms) [ok]: When default user is off, new connections are not authenticated (0 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (0 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (3 ms) [ok]: ACL-Metrics invalid command accesses (1 ms) [ok]: ACL-Metrics invalid key accesses (2 ms) [ok]: ACL-Metrics invalid channels accesses (2 ms) [ok]: WATCH will consider touched expired keys (1105 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (0 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: MULTI / EXEC is not propagated (single write command) (69 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL LOAD only disconnects affected clients (1 ms) [ok]: ACL LOAD disconnects clients of deleted users (0 ms) [ok]: ACL load and save (0 ms) [ok]: ACL load and save with restricted channels (1 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (603 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (100 ms) [ok]: Check consistency of different data types after a reload (425 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (0 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (1 ms) [ok]: XCLAIM with trimming (0 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (1 ms) [ok]: XINFO FULL output (2 ms) [ok]: BRPOPLPUSH timeout (1014 ms) [ok]: SWAPDB awakes blocked client (0 ms) [ok]: Same dataset digest if saving/reloading as AOF? (167 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (103 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (110 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: Only default user has access to all channels irrespective of flag (0 ms) [ok]: Consumer seen-time and active-time (203 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (1 ms) [ok]: XGROUP CREATECONSUMER: group must exist (0 ms) [ok]: MULTI / EXEC with REPLICAOF (101 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: XREADGROUP with NOACK creates consumer (2 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: SETEX - Wait for the key to expire (1100 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (300 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (104 ms) [ok]: Consumer group read counter and lag in empty streams (1 ms) [ok]: Consumer group read counter and lag sanity (2 ms) [ok]: Consumer group lag with XDELs (6 ms) [ok]: Loading from legacy (Redict <= v6.2.x, rdb_ver < 10) persistence (0 ms) [ok]: Loading from legacy (Redict <= v7.0.x, rdb_ver < 11) persistence (0 ms) [ok]: default: load from config file with all channels permissions (0 ms) [ok]: MULTI and script timeout (403 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (102 ms) [ok]: Test loading an ACL file with duplicate users (1 ms) [ok]: Test loading an ACL file with duplicate default user (2 ms) [ok]: Test loading duplicate users in config on startup (9 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (101 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1874 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: EXEC and script timeout (402 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (103 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (2 ms) [ok]: XREADGROUP ACK would propagate entries-read (2 ms) [ok]: ZDIFF fuzzing - skiplist (2208 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (0 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (0 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (0 ms) [ok]: ZMPOP with illegal argument (1 ms) [ok]: LTRIM stress testing - quicklist (4649 ms) [ok]: ACL from config file and config rewrite (212 ms) [10/91 done]: unit/acl (2 seconds) Testing unit/acl-v2 [ok]: ZMPOP propagate as pop with count command to replica (55 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (1 ms) [ok]: Big Hash table: SORT BY key (565 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (0 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (1 ms) [ok]: Test separate read permission (0 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (0 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (0 ms) [ok]: Big Hash table: SORT BY key with limit (12 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (0 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (1 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Test ACL list idempotency (0 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: Test various commands for command permissions (0 ms) [ok]: Test various odd commands for key permissions (2 ms) [ok]: Existence test commands are not marked as access (0 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (1 ms) [ok]: Test sharded channel permissions (0 ms) [ok]: Test sort with ACL permissions (1 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (0 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (0 ms) [ok]: BLPOP: with zero timeout should block indefinitely (0 ms) [ok]: MULTI-EXEC body and script timeout (402 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (199 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (104 ms) [ok]: EXPIRE precision is now the millisecond (1102 ms) [ok]: Test behavior of loading ACLs (0 ms) [11/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/latency-monitor [ok]: PSETEX can set sub-second expires (102 ms) [ok]: BZMPOP readraw in RESP3 (199 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [12/91 done]: unit/acl-v2 (1 seconds) Testing integration/block-repl [ok]: SETNX against expired volatile key (2430 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (1 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (1 ms) [ok]: GETEX and GET expired key or not exist (2 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: LATENCY HISTOGRAM command (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (1 ms) [ok]: PEXPIRE can set sub-second expires (101 ms) [ok]: GETDEL propagate as DEL command to replica (69 ms) [ok]: just EXEC and script timeout (403 ms) [ok]: exec with write commands and state change (1 ms) [ok]: exec with read commands and stale replica state change (1 ms) [ok]: EXEC with only read commands should not be rejected when OOM (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (1 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (199 ms) [ok]: ZMPOP readraw in RESP2 (1 ms) [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: MGET (7 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (1 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (1 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (1 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (0 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: XREAD with non empty second stream (940 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: MULTI propagation of PUBLISH (96 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: Big Hash table: SORT BY hash field (573 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (2 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (0 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (1 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (0 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (0 ms) [ok]: SORT sorted set: +inf and -inf handling (0 ms) [ok]: SORT regression for issue #19, sorting floats (8 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (1 ms) [ok]: SORT with BY and STORE should still order output (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (0 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Blocking XREAD will not reply with an empty array (36 ms) [ok]: SORT speed, 100 element list BY key, 100 times (17 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (19 ms) [ok]: SORT speed, 100 element list directly, 100 times (12 ms) [ok]: SORT speed, 100 element list BY , 100 times (10 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: MULTI propagation of SCRIPT LOAD (100 ms) [ok]: BZMPOP readraw in RESP2 (200 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (101 ms) [ok]: XREAD last element from non-empty stream (1 ms) [ok]: XREAD last element from empty stream (0 ms) [ok]: XREAD last element blocking from empty stream (1 ms) [ok]: XREAD last element blocking from non-empty stream (0 ms) [ok]: XREAD last element from multiple streams (1 ms) [ok]: XREAD last element with count > 1 (0 ms) [ok]: XREAD: XADD + DEL should not awake client (2 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: XREAD + multiple XADD inside transaction (2 ms) [ok]: XDEL basic test (0 ms) [ok]: XDEL multiply id test (0 ms) [ok]: SORT STORE quicklist with the right options (51 ms) [ok]: SETBIT fuzzing (256 ms) [ok]: GETBIT against non-existing key (1 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (0 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (1 ms) [ok]: MULTI propagation of EVAL (100 ms) [ok]: SETRANGE against key with wrong type (0 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (1 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (0 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: ZUNIONSTORE result is sorted (117 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (1 ms) [ok]: ZSCORE - listpack (16 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2104 ms) [ok]: ZMSCORE - listpack (16 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (20 ms) [ok]: MULTI propagation of SCRIPT FLUSH (100 ms) [ok]: ZSET sorting stresser - listpack (23 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (0 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: {standalone} SCAN regression test for issue #4906 (5239 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (19 ms) [ok]: BLPOP: timeout (1075 ms) [ok]: BLPOP: arguments are empty (1 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (0 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BRPOP: second argument is not a list (0 ms) [ok]: MULTI with BGREWRITEAOF (204 ms) [ok]: Redict should actively expire keys incrementally (703 ms) [ok]: MULTI with config set appendonly (203 ms) [ok]: MULTI with config error (0 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (562 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: GETRANGE fuzzing (703 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (0 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (1 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (0 ms) [13/91 done]: unit/type/string (7 seconds) Testing integration/replication [ok]: First server should have role slave after SLAVEOF (1002 ms) [ok]: APPEND fuzzing (151 ms) [ok]: MULTI with FLUSHALL and AOF (1 ms) [ok]: FLUSHDB (49 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (0 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (0 ms) [ok]: RESET clears and discards MULTI state (1 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (0 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [14/91 done]: unit/multi (5 seconds) Testing integration/replication-2 [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: If min-slaves-to-write is honored, write is accepted (0 ms) [ok]: No write if min-slaves-to-write is < attached slaves (1 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: Don't rehash if redict has child process (308 ms) [ok]: XDEL fuzz test (1389 ms) [ok]: BRPOP: timeout (1078 ms) [ok]: BRPOP: arguments are empty (1 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (0 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (0 ms) [ok]: Redict should lazy expire keys (1002 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (0 ms) [ok]: Process title set as expected (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1479 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (146 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (204 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (17 ms) [ok]: sort by in cluster mode (0 ms) [ok]: sort get in cluster mode (1 ms) [ok]: sort_ro by in cluster mode (0 ms) [ok]: sort_ro get in cluster mode (0 ms) [15/91 done]: unit/sort (7 seconds) Testing integration/replication-3 [ok]: {cluster} SCAN basic (48 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (480 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (0 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: {cluster} SCAN COUNT (53 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1001 ms) [ok]: 5 keys in, 5 keys out (0 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (1 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: {cluster} SCAN MATCH (43 ms) [ok]: BLMPOP_LEFT: timeout (1078 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (0 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (0 ms) [ok]: {cluster} SCAN TYPE (65 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: {cluster} SCAN unknown type (44 ms) [ok]: {cluster} SCAN with expired keys (50 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (50 ms) [ok]: {cluster} SSCAN with encoding intset (1 ms) [ok]: {cluster} SSCAN with encoding listpack (1 ms) [ok]: {cluster} SSCAN with encoding hashtable (2 ms) [ok]: {cluster} HSCAN with encoding listpack (1 ms) [ok]: {cluster} HSCAN with encoding hashtable (70 ms) [ok]: {cluster} ZSCAN with encoding listpack (2 ms) [ok]: {cluster} ZSCAN with encoding skiplist (65 ms) [ok]: {cluster} SCAN guarantees check under write load (13 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (1 ms) [ok]: {cluster} HSCAN with NOVALUES (0 ms) [ok]: {cluster} ZSCAN with PATTERN (0 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (43 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (8073 ms) [ok]: Test latency events logging (3401 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (0 ms) [ok]: SRANDMEMBER with a dict containing long chain (5922 ms) [ok]: SMOVE basics - from regular set to intset (1 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (0 ms) [ok]: SMOVE from regular set to non existing destination set (0 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1003 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: BLMPOP_RIGHT: timeout (1078 ms) [ok]: BLMPOP_RIGHT: arguments are empty (1 ms) [ok]: BLPOP inside a transaction (1 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: LTRIM stress testing - listpack (4613 ms) [16/91 done]: unit/type/list-2 (10 seconds) Testing integration/replication-4 [ok]: BLMPOP propagate as pop with count command to replica (198 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (46 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: LINSERT - quicklist (48 ms) [ok]: LPUSHX, RPUSHX - listpack (0 ms) [ok]: LINSERT - listpack (1 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (40 ms) [ok]: LINDEX random access - listpack (29 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2815 ms) [ok]: min-slaves-to-write is ignored by slaves (0 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (68 ms) [ok]: LINDEX consistency test - listpack (81 ms) [ok]: intsets implementation stress testing (1017 ms) [ok]: LINDEX random access - listpack (57 ms) [17/91 done]: unit/type/set (11 seconds) Testing integration/replication-psync [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (115 ms) [ok]: LINDEX consistency test - quicklist (32 ms) [ok]: LINDEX random access - quicklist (23 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (0 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (45 ms) [ok]: LINDEX consistency test - quicklist (64 ms) [ok]: LINDEX random access - quicklist (45 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2020 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (107 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (0 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (1 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (7 ms) [ok]: RPOPLPUSH base case - quicklist (42 ms) [ok]: LMOVE left left base case - quicklist (47 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (52 ms) [ok]: LMOVE left right base case - quicklist (43 ms) [ok]: LMOVE right left base case - quicklist (47 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: LMOVE right right base case - quicklist (46 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (12 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (46 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (43 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (43 ms) [ok]: Slave should be able to synchronize with the master (100 ms) [ok]: Detect write load to master (0 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (299 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (90 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (90 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (87 ms) [ok]: Redict can trigger resizing (1809 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1001 ms) [ok]: MASTER and SLAVE consistency with expire (2951 ms) [ok]: ZSCORE - skiplist (14 ms) [ok]: ZMSCORE - skiplist (12 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (22 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (90 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (21 ms) [ok]: ZSET sorting stresser - skiplist (14 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (84 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (43 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (47 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (43 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (2790 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (1 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (43 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (46 ms) [ok]: RPOPLPUSH base case - listpack (1 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (1 ms) [ok]: LMOVE right left base case - listpack (1 ms) [ok]: LMOVE right right base case - listpack (0 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (0 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (42 ms) [18/91 done]: unit/latency-monitor (6 seconds) Testing integration/replication-buffer [ok]: LMOVE left left with listpack source and existing target quicklist (47 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (47 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (44 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (0 ms) [ok]: LMOVE left left with listpack source and existing target listpack (0 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (1 ms) [ok]: LMOVE right right with listpack source and existing target listpack (1 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (44 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: Redict can rewind and trigger smaller slot resizing (700 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (88 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (0 ms) [ok]: LPOP/RPOP/LMPOP against empty list (0 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (1 ms) [ok]: Mass RPOP/LPOP - listpack (28 ms) [ok]: Mass RPOP/LPOP - listpack (51 ms) [ok]: LMPOP with illegal argument (1 ms) [ok]: Redict can resize empty dict (15 ms) [19/91 done]: unit/other (11 seconds) Testing integration/shutdown [ok]: LMPOP single existing list - quicklist (137 ms) [ok]: XRANGE fuzzing (5134 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (1 ms) [ok]: XTRIM with MAXLEN option basic test (61 ms) [ok]: XADD with LIMIT consecutive calls (7 ms) [ok]: XTRIM with ~ is limited (7 ms) [ok]: XTRIM without ~ is not limited (6 ms) [ok]: XTRIM without ~ and with LIMIT (6 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: LMPOP multiple existing lists - quicklist (174 ms) [ok]: LMPOP single existing list - listpack (2 ms) [ok]: LMPOP multiple existing lists - listpack (1 ms) [ok]: LMPOP propagate as pop with count command to replica (34 ms) [ok]: LRANGE basics - quicklist (46 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1156 ms) [ok]: LRANGE inverted indexes - quicklist (43 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (7 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (47 ms) [ok]: LRANGE out of range negative end index - quicklist (43 ms) [ok]: LRANGE basics - listpack (1 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (1 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (0 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (141 ms) [ok]: XADD with MINID > lastid can propagate correctly (10 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (167 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (12 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (12 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2003 ms) [ok]: GETEX use of PERSIST option should remove TTL (0 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: LTRIM basics - quicklist (547 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (7 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (61 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (1 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (0 ms) [ok]: LTRIM out of range negative end index - quicklist (90 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (468 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: LSET - quicklist (44 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (6 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (0 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: Redict should not propagate the read command on lazy expire (94 ms) [ok]: LREM remove all the occurrences - quicklist (42 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (43 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: XADD with ~ MINID can propagate correctly (7 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (42 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (3 ms) [ok]: client unblock tests (2 ms) [ok]: List listpack -> quicklist encoding conversion (2 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (8 ms) [ok]: List listpack -> quicklist encoding conversion (187 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (7 ms) [ok]: List quicklist -> listpack encoding conversion (224 ms) [ok]: List encoding conversion when RDB loading (3 ms) [ok]: List invalid list-max-listpack-size config (46 ms) [ok]: List of various encodings (50 ms) [ok]: List of various encodings - sanitize dump (1 ms) [ok]: Unblock fairness is kept while pipelining (1 ms) [ok]: Unblock fairness is kept during nested unblock (2 ms) [ok]: Blocking command accounted only once in commandstats (1 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (1799 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (4125 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (80 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (1 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: All replicas share one global replication buffer (44 ms) [ok]: Replication buffer will become smaller when no replica uses (3 ms) [20/91 done]: integration/replication-2 (7 seconds) Testing integration/aof [21/91 done]: unit/type/list (14 seconds) Testing integration/aof-race [ok]: Unfinished MULTI: Server should start if load-truncated is yes (0 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (1 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (2 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (0 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1002 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (0 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: Empty stream can be rewrite into AOF correctly (103 ms) [22/91 done]: integration/aof-race (1 seconds) Testing integration/aof-multi-part [ok]: {cluster} SCAN regression test for issue #4906 (5891 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (18 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (103 ms) [23/91 done]: unit/scan (15 seconds) Testing integration/rdb [ok]: Multi Part AOF can't load data when some file missing (107 ms) [ok]: test old version rdb file (0 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (107 ms) [ok]: Bad format: Server should have logged an error (1 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (108 ms) [ok]: Test replication with parallel clients writing in different DBs (5212 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [24/91 done]: unit/type/stream (14 seconds) Testing integration/corrupt-dump [ok]: RDB encoding loading test (3 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (108 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (6 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (5 ms) [ok]: Short read: Utility should be able to fix the AOF (5 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (110 ms) [ok]: corrupt payload: #7445 - with sanitize (214 ms) [ok]: Fixed AOF: Server should have been started (0 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (0 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (108 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1005 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (109 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (214 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (110 ms) [ok]: First server should have role slave after SLAVEOF (100 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (0 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (0 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (0 ms) [ok]: MIGRATE cached connections are released after some time (15002 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (109 ms) [ok]: corrupt payload: invalid zlbytes header (214 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (110 ms) [ok]: Test RDB stream encoding (51 ms) [ok]: Test RDB stream encoding - sanitize dump (4 ms) [ok]: MIGRATE is able to migrate a key between two instances (223 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (1798 ms) [ok]: corrupt payload: valid zipped hash header, dup records (214 ms) [ok]: Server should not start if RDB file can't be open (0 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [ok]: Multi Part AOF can start when no aof and no manifest (227 ms) [ok]: MIGRATE is able to copy a key between two instances (225 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: corrupt payload: quicklist big ziplist prev len (214 ms) [ok]: Redict should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (227 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (214 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: BZPOP/BZMPOP against wrong type (1 ms) [ok]: BZMPOP with illegal argument (1 ms) [ok]: BZMPOP with multiple blocked clients (2 ms) [ok]: Replication backlog size can outgrow the backlog limit config (814 ms) [ok]: corrupt payload: quicklist small ziplist prev len (216 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (221 ms) [ok]: Test FLUSHALL aborts bgsave (284 ms) [ok]: BZMPOP propagate as pop with count command to replica (193 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (1 ms) [ok]: bgsave resets the change counter (101 ms) [ok]: MIGRATE propagates TTL correctly (298 ms) [ok]: corrupt payload: quicklist ziplist wrong count (227 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (217 ms) [ok]: corrupt payload: #3080 - quicklist (214 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (218 ms) [ok]: expire scan should skip dictionaries with lot's of empty buckets (1213 ms) [ok]: ZSET skiplist order consistency when elements are moved (428 ms) [ok]: ZRANGESTORE basic (0 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (1 ms) [25/91 done]: unit/expire (16 seconds) Testing integration/corrupt-dump-fuzzer [ok]: ZRANDMEMBER - listpack (4 ms) [ok]: ZRANDMEMBER - skiplist (4 ms) [ok]: ZRANDMEMBER with RESP3 (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (1 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: corrupt payload: quicklist with empty ziplist (224 ms) [ok]: ZRANDMEMBER with - skiplist (147 ms) [ok]: Multi Part AOF can load data from old version redict (rdb preamble no) (333 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (214 ms) [ok]: ZRANDMEMBER with - listpack (147 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (8 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (3 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (0 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6269 ms) [ok]: Slave is able to evict keys created in writable slaves (6002 ms) [26/91 done]: unit/type/zset (18 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Set instance A as slave of B (101 ms) [ok]: INCRBYFLOAT replication, should not remove expire (1 ms) [ok]: GETSET replication (1 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (1 ms) [ok]: Writable replica doesn't return expired keys (102 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (222 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: client freed during loading (898 ms) [ok]: Multi Part AOF can load data from old version redict (rdb preamble yes) (344 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (101 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (1211 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (8798 ms) [ok]: corrupt payload: #3080 - ziplist (214 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (135 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: Shutting down master waits for replica timeout (1893 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (108 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (220 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (218 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (113 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (455 ms) [27/91 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: Test RDB load info (521 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (0 ms) [28/91 done]: integration/replication-3 (10 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: corrupt payload: load corrupted rdb with empty keys (219 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2717 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (0 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (0 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict1) (103 ms) [ok]: BRPOPLPUSH replication, list exists (1002 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (1 ms) [ok]: corrupt payload: listpack invalid size header (223 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict2) (103 ms) [29/91 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/logging [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (0 ms) [ok]: corrupt payload: listpack too long entry len (121 ms) [30/91 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (626 ms) [ok]: corrupt payload: listpack very long entry len (122 ms) [ok]: Crash report generated on SIGABRT (102 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [ok]: corrupt payload: listpack too long entry prev len (223 ms) [ok]: Shutting down master waits for replica then fails (1233 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (316 ms) [ok]: Stacktraces generated on SIGALRM (102 ms) [ok]: corrupt payload: stream with duplicate consumers (224 ms) [31/91 done]: integration/logging (0 seconds) Testing integration/psync2-reg [ok]: Multi Part AOF can create BASE (RDB format) when redict starts from empty (221 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: Replication of an expired key does not delete the expired key (510 ms) [ok]: corrupt payload: hash ziplist with duplicate records (224 ms) [ok]: BLMOVE (left, left) replication, list exists (1002 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redict starts from empty (222 ms) [ok]: Shutting down master waits for replica then aborted (524 ms) [32/91 done]: integration/shutdown (7 seconds) Testing integration/psync2-pingoff [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: corrupt payload: hash listpack with duplicate records (222 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (120 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: corrupt payload: hash ziplist uneven record count (224 ms) [ok]: AOF enable will create manifest file (482 ms) [ok]: corrupt payload: hash duplicate records (222 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (1 ms) [ok]: Test child sending info (1980 ms) [ok]: corrupt payload: hash empty zipmap (215 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: BLMOVE (left, right) replication, list exists (1002 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (1 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (119 ms) [ok]: PSYNC2 #3899 regression: setup (1003 ms) [ok]: MIGRATE can correctly transfer large values (3968 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (17354 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (119 ms) [ok]: PSYNC2 pingoff: setup (1002 ms) [ok]: PSYNC2 pingoff: write and wait replication (0 ms) [ok]: MIGRATE can correctly transfer hashes (223 ms) [ok]: failed bgsave prevents writes (198 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (232 ms) [33/91 done]: integration/rdb (6 seconds) Testing integration/psync2-master-restart [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1011 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (223 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (224 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3129 ms) [ok]: MIGRATE timeout actually works (630 ms) [ok]: BLMOVE (right, left) replication, list exists (1002 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (477 ms) [ok]: corrupt payload: fuzzer findings - hash crash (223 ms) [ok]: MIGRATE can migrate multiple keys at once (224 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: AOF enable/disable auto gc (205 ms) [ok]: AOF fsync always barrier issue (5242 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (223 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (1 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (224 ms) [ok]: AOF can produce consecutive sequence number after reload (177 ms) [ok]: GETEX should not append to AOF (0 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (223 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (213 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (111 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (223 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (309 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (1 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (224 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (101 ms) [ok]: BLMOVE (right, right) replication, list exists (1002 ms) [ok]: corrupt payload: fuzzer findings - empty intset (214 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1125 ms) [34/91 done]: integration/replication-buffer (11 seconds) Testing integration/failover [ok]: MIGRATE AUTH: correct and wrong password cases (224 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (0 ms) [ok]: BLPOP followed by role change, issue #2473 (202 ms) [35/91 done]: unit/dump (23 seconds) Testing integration/redict-cli [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (223 ms) [ok]: Interactive CLI: INFO response should be printed raw (61 ms) [ok]: AOF will trigger limit when AOFRW fails many times (601 ms) [ok]: failover command fails without connected replica (1 ms) [ok]: Interactive CLI: Status reply (60 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (223 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: setup replication for following tests (101 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (102 ms) [ok]: Interactive CLI: Bulk reply (61 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (0 ms) [ok]: Interactive CLI: Multi-bulk reply (61 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (222 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (0 ms) [ok]: SET on the master should immediately propagate (1 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (0 ms) [ok]: FLUSHDB / FLUSHALL should replicate (94 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (224 ms) [ok]: Interactive CLI: Parsing quotes (424 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (223 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1114 ms) [ok]: Generate timestamp annotations in AOF (318 ms) [ok]: failover command to specific replica works (741 ms) [ok]: Successfully load AOF which has timestamp annotations inside (0 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (222 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (120 ms) [ok]: Interactive CLI: Subscribed mode (600 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (222 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (121 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (224 ms) [ok]: Truncate AOF to specific timestamp (674 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (414 ms) [ok]: Non-interactive TTY CLI: Status reply (2 ms) [ok]: Non-interactive TTY CLI: Integer reply (1 ms) [ok]: Non-interactive TTY CLI: Bulk reply (1 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (2 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (3 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (13 ms) [ok]: Non-interactive non-TTY CLI: Status reply (2 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (1 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (2 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (1 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (52 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (5 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (3 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (4 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (4 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (7 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (2 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (8 ms) [ok]: corrupt payload: OOM in rdbGenericLoadStringObject (222 ms) [ok]: failover command to any replica works (1026 ms) [ok]: corrupt payload: fuzzer findings - OOM in dictExpand (220 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2075 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (215 ms) [ok]: failover to a replica with force works (417 ms) [36/91 done]: integration/aof-multi-part (10 seconds) Testing integration/redict-benchmark [ok]: corrupt payload: fuzzer findings - negative reply length (120 ms) [ok]: benchmark: set,get (3 ms) [ok]: benchmark: connecting using URI set,get (4 ms) [ok]: benchmark: connecting using URI with authentication set,get (3 ms) [ok]: benchmark: full test suite (55 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1835 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (214 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (7839 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (1107 ms) [ok]: failover with timeout aborts if replica never catches up (545 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (223 ms) [ok]: failovers can be aborted (13 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7848 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: EVAL can process writes from AOF in read-only replicas (221 ms) [ok]: Test redict-check-aof for old style resp AOF (5 ms) [ok]: Test redict-check-aof for old style resp AOF - has data in the same format as manifest (5 ms) [ok]: Test redict-check-aof for old style rdb-preamble AOF (6 ms) [ok]: Test redict-check-aof for Multi Part AOF with resp AOF base (5 ms) [ok]: Test redict-check-aof for Multi Part AOF with rdb-preamble AOF base (7 ms) [ok]: Test redict-check-aof for Multi Part AOF contains a format error (5 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in fix mode (10 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (6 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (223 ms) [ok]: benchmark: multi-thread set,get (508 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: benchmark: pipelined full set,get (60 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (3 ms) [ok]: benchmark: arbitrary command (5 ms) [ok]: benchmark: keyspace length (15 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (2 ms) [ok]: benchmark: read last argument from stdin (4 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (120 ms) [37/91 done]: integration/redict-benchmark (1 seconds) Testing integration/dismiss-mem [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [38/91 done]: integration/aof (12 seconds) Testing unit/pubsub [ok]: Pub/Sub PING on RESP2 (0 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (0 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (0 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: PUBLISH/PSUBSCRIBE basics (1 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (0 ms) [ok]: failover aborts if target rejects sync request (516 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (223 ms) [ok]: Dumping an RDB - functions only: no (1633 ms) [ok]: PubSub messages with CLIENT REPLY OFF (86 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (0 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (0 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9273 ms) [ok]: Keyspace notifications: we receive keyspace notifications (44 ms) [ok]: Keyspace notifications: we receive keyevent notifications (43 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (0 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (1 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (1 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (223 ms) [ok]: Keyspace notifications: expired events (triggered expire) (201 ms) [ok]: corrupt payload: fuzzer findings - huge string (222 ms) [ok]: Make the old master a replica of the new one and check conditions (1004 ms) [ok]: Keyspace notifications: expired events (background expire) (207 ms) [ok]: Keyspace notifications: evicted events (0 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (0 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (0 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [39/91 done]: unit/pubsub (1 seconds) Testing unit/pubsubshard [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (222 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Dumping an RDB - functions only: yes (761 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (0 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (1 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (1 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (120 ms) [ok]: Scan mode (71 ms) [ok]: PubSubShard with CLIENT REPLY OFF (84 ms) Waiting for process 27768 to exit... [ok]: PSYNC2: Full resync after Master restart when too many key expired (1831 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (224 ms) [ok]: dismiss all data types memory (1133 ms) [40/91 done]: integration/failover (5 seconds) Testing unit/slowlog [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (119 ms) [ok]: SLOWLOG - check that it starts with an empty log (1 ms) [ok]: setup replication for following tests (101 ms) [ok]: publish message to master and receive on replica (1 ms) [41/91 done]: integration/psync2-master-restart (7 seconds) Testing unit/scripting [ok]: dismiss client output buffer (217 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (223 ms) [ok]: Redis compatibility global exists (1 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (1 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redict API? (1 ms) [ok]: EVAL - Redict integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redict integer conversion (0 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (200 ms) [ok]: SLOWLOG - zero max length is correctly handled (5 ms) [ok]: SLOWLOG - max entries is correctly handled (5 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (2 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: dismiss client query buffer (208 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (187 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: redict.sha1hex() implementation (0 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (223 ms) [ok]: SLOWLOG - logged entry sanity check (200 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (2 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (1 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (2 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - empty zset (222 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [42/91 done]: unit/pubsubshard (1 seconds) Testing unit/functions [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 70991) (0 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (224 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (1 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: FUNCTION - Basic usage (0 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (1 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (1 ms) [ok]: FUNCTION - test fcall negative number of keys (0 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (1 ms) [ok]: FUNCTION - test debug reload different options (2 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (1 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (0 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (0 ms) [ok]: FUNCTION - test function dump and restore with append argument (1 ms) [ok]: FUNCTION - test function dump and restore with replace argument (0 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (0 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (223 ms) [ok]: SLOWLOG - can be disabled (401 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (2 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (2 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (223 ms) [ok]: FUNCTION - test function kill (402 ms) [43/91 done]: unit/slowlog (1 seconds) Testing unit/maxmemory [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (0 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (2 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: Replication: commands with many arguments (issue #1221) (9063 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: spopwithcount rewrite srem command (70 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (38 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (223 ms) [ok]: dismiss replication backlog (1227 ms) [44/91 done]: integration/dismiss-mem (3 seconds) Testing unit/introspection [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (119 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (1 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (249 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (118 ms) [ok]: FUNCTION - test script kill not working on function (416 ms) [ok]: Connecting as a replica (2148 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (1 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (222 ms) [ok]: EVAL does not leak in the Lua stack (665 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redict namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (625 ms) [ok]: Script return recursive object (104 ms) [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (1 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: Script check unpack with massive arguments (27 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (223 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (222 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (700 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (47 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: FUNCTION - creation is replicated to replica (1 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (223 ms) [ok]: Piping raw protocol (835 ms) [ok]: Options -X with illegal argument (4 ms) [ok]: DUMP RESTORE with -x option (7 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (2 ms) [ok]: Data divergence is allowed on writable replicas (1 ms) [ok]: DUMP RESTORE with -X option (8 ms) [ok]: Disconnecting the replica from master instance (101 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (0 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [45/91 done]: integration/redict-cli (7 seconds) Testing unit/introspection-2 [ok]: eviction due to input buffer of a dead client, client eviction: true (240 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (401 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [46/91 done]: integration/replication-4 (21 seconds) Testing unit/limits [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (37 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (223 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (1 ms) [ok]: Timedout script does not cause a false dead client (37 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Timedout script link is still usable after Lua returns (59 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (223 ms) [47/91 done]: integration/corrupt-dump (16 seconds) Testing unit/obuf-limits [ok]: eviction due to output buffers of pubsub, client eviction: true (452 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: Timedout scripts and unblocked command (348 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (0 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (112 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3514 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2002 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (1 ms) [ok]: CLIENT command unhappy path coverage (1 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (317 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (240 ms) [ok]: CLIENT KILL close the client connection during bgsave (105 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (0 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (1 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redict.call from function load (0 ms) [ok]: LIBRARIES - redict.setresp from function load (0 ms) [ok]: LIBRARIES - redict.set_repl from function load (0 ms) [ok]: LIBRARIES - redict.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (0 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (0 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (45 ms) [ok]: Check if maxclients works refusing connections (905 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (47 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (43 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (0 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (1 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: MONITOR log blocked command only once (1 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT GETNAME check if name set correctly (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (1 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (222 ms) [48/91 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: BITCOUNT against wrong type (0 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (1 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (236 ms) [ok]: Test replication with blocking lists and sorted sets operations (25004 ms) [ok]: BITCOUNT fuzzing without start/end (213 ms) [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (0 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (1 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (0 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [49/91 done]: integration/block-repl (26 seconds) Testing unit/bitfield [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (234 ms) [ok]: BITFIELD signed SET and GET basics (0 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (1 ms) [ok]: BITFIELD # form (0 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (0 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (0 ms) [ok]: BITFIELD signed overflow sat (1 ms) [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (1 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (1 ms) [ok]: FUNCTION - deny oom on no-writes function (0 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - redict version api (1 ms) [ok]: FUNCTION - legacy redis version is hard-coded to 7.2.4 (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (1 ms) [ok]: FUNCTION - function stats delete library (0 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (0 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [50/91 done]: unit/functions (4 seconds) Testing unit/geo [ok]: BITFIELD overflow detection fuzzing (140 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (244 ms) [ok]: BITCOUNT fuzzing with start/end (382 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: BITCOUNT with illegal arguments (1 ms) [ok]: BITCOUNT against non-integer value (0 ms) [ok]: BITCOUNT regression test for github issue #582 (1 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (1 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (0 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: GEO with non existing src key (0 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (0 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (1 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (1 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (1 ms) [ok]: GEODIST simple & unit (0 ms) [ok]: GEODIST missing elements (1 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (1 ms) [ok]: GEORANGE STORE option: incompatible options (0 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (0 ms) [ok]: CONFIG save params special case handled properly (897 ms) [ok]: BITFIELD overflow wrap fuzzing (186 ms) [ok]: BITFIELD regression for #3221 (1 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: CONFIG sanity (16 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (218 ms) [ok]: BITOP and fuzzing (222 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: redict.replicate_commands() can be issued anywhere now (0 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: redict.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redict commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: CONFIG REWRITE sanity (168 ms) [ok]: BITOP or fuzzing (177 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (345 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: BITOP xor fuzzing (247 ms) [ok]: BITOP NOT fuzzing (25 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (0 ms) [ok]: BITOP with empty string after non empty string (issue #529) (0 ms) [ok]: BITPOS against wrong type (0 ms) [ok]: BITPOS will illegal arguments (0 ms) [ok]: BITPOS against non-integer value (0 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (1 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (2 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (2 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (2 ms) [51/91 done]: unit/bitfield (1 seconds) Testing unit/memefficiency [ok]: BITPOS bit=1 fuzzy testing using SETBIT (124 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (316 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (126 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (656 ms) [ok]: CONFIG SET with multiple args (1 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (2 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (3 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: redict-server command line arguments - error cases (54 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (138 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [52/91 done]: unit/bitops (2 seconds) Testing unit/hyperloglog [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (1 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Memory efficiency with values in range 32 (325 ms) [ok]: Script delete the expired key (3 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (335 ms) [ok]: TIME command using cached time (10 ms) [ok]: redict-server command line arguments - allow passing option name and option value in the same arg (214 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: redict-server command line arguments - wrong usage that we support anyway (224 ms) [ok]: Redis compatibility global exists (1 ms) [ok]: Script - disallow write on OOM (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (0 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redict API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redict integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redict integer conversion (0 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: Memory efficiency with values in range 64 (329 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (338 ms) [ok]: HyperLogLog self test passes (388 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (1 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (177 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (12 ms) [ok]: SCRIPTING FLUSH ASYNC (5 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (0 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redict.sha1hex() implementation (0 ms) [ok]: redict-server command line arguments - allow option value to use the `--` prefix (223 ms) [ok]: Memory efficiency with values in range 128 (334 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (367 ms) [ok]: redict-server command line arguments - option name and option value in the same arg and `--` prefix (216 ms) [ok]: Client output buffer hard limit is enforced (3430 ms) [ok]: HyperLogLogs are promote from sparse to dense (306 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (29 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (251 ms) [ok]: Memory efficiency with values in range 1024 (370 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (242 ms) [ok]: HyperLogLog sparse encoding stress test (546 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2912 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (239 ms) [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (0 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (0 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: Test an example script DECR_IF_GT (0 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (247 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: EVAL does not leak in the Lua stack (322 ms) [ok]: redict-server command line arguments - save with empty input (1111 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (78 ms) [ok]: Memory efficiency with values in range 16384 (976 ms) [ok]: MGET: mget shouldn't be propagated in Lua (100 ms) [ok]: redict-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (215 ms) [53/91 done]: unit/memefficiency (3 seconds) Testing unit/lazyfree [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9429 ms) [54/91 done]: integration/psync2-pingoff (16 seconds) Testing unit/wait [ok]: cannot modify protected configuration - local (4 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (318 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redict namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: UNLINK can reclaim memory in background (257 ms) [ok]: Script return recursive object (105 ms) [ok]: Script check unpack with massive arguments (27 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (227 ms) [ok]: Setup slave (101 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: lazy free a stream with all types of metadata (91 ms) [ok]: lazy free a stream with deleted cgroup (1 ms) [55/91 done]: unit/lazyfree (0 seconds) Testing unit/pause [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test read commands are not blocked by client pause (0 ms) [ok]: TOUCH alters the last access time of a key (3002 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9971 ms) [56/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/querybuf [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 143290) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (1 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (402 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (35 ms) [ok]: Timedout script does not cause a false dead client (37 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (344 ms) [ok]: Timedout script link is still usable after Lua returns (58 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (0 ms) [ok]: Test special commands are paused by RO (1 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (1 ms) [ok]: Test write multi-execs are blocked by pause RO (0 ms) [ok]: Test scripts are blocked by pause RO (0 ms) [ok]: Test RO scripts are not blocked by pause RO (0 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (1 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (0 ms) [ok]: config during loading (862 ms) [ok]: Test both active and passive expires are skipped during client pause (102 ms) [ok]: Test that client pause starts at the end of a transaction (1 ms) [ok]: Timedout scripts and unblocked command (348 ms) [ok]: Test when replica paused, offset would not grow (1 ms) [ok]: Test replica offset would grow after unpause (0 ms) [ok]: CONFIG REWRITE handles rename-command properly (342 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [57/91 done]: unit/pause (1 seconds) Testing unit/tls [ok]: WAIT should not acknowledge 2 additional copies of the data (1081 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (1 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1101 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (0 ms) [ok]: command stats for EXPIRE (0 ms) [ok]: command stats for BRPOP (0 ms) [ok]: command stats for MULTI (2 ms) [ok]: command stats for scripts (2 ms) [ok]: COMMAND COUNT get total number of Redict commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (0 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (0 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (2 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (0 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (0 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (0 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (0 ms) [ok]: RENAME command will not be marked with movablekeys (0 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (1 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (0 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (0 ms) [58/91 done]: unit/tls (1 seconds) Testing unit/tracking [ok]: Before the replica connects we issue two EVAL commands (0 ms) [59/91 done]: unit/introspection-2 (8 seconds) Testing unit/oom-score-adj [ok]: Connect a replica to the master instance (101 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (1 ms) [ok]: Replication of script multiple pushes to list with BLPOP (0 ms) [ok]: EVALSHA replication when first call is readonly (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (0 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (0 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (0 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (0 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: CONFIG SET oom-score-adj works as expected (8 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [60/91 done]: unit/oom-score-adj (0 seconds) Testing unit/shutdown [ok]: CONFIG REWRITE handles alias config properly (664 ms) [61/91 done]: unit/introspection (9 seconds) Testing unit/networking [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (111 ms) [ok]: CONFIG SET port number (214 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (12 ms) [ok]: ziplist implementation: value encoding and backlink (12599 ms) [ok]: Temp rdb will be deleted in signal handle (93 ms) [ok]: CONFIG SET bind address (223 ms) [ok]: RDB save will be failed in shutdown (1 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4198 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1102 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (114 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (0 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: Tracking gets notification of expired keys (1001 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (98 ms) [ok]: Tracking gets notification of lazy expired keys (101 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (1 ms) [ok]: RESP3 based basic invalidation (0 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (0 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (1 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (0 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (0 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: redict.replicate_commands() can be issued anywhere now (0 ms) [ok]: Invalidation message sent when using OPTOUT option (0 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (1 ms) [ok]: Able to redirect to a RESP3 client (0 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (0 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: CONFIG SET bind-source-addr (518 ms) [62/91 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: Tracking invalidation message is not interleaved with multiple keys response (111 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (0 ms) [ok]: Tracking invalidation message of eviction keys should be before response (1 ms) [ok]: Unblocked BLMOVE gets notification after response (1 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (14889 ms) [ok]: Tracking gets notification on tracking table key eviction (78 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (1 ms) [ok]: Test ASYNC flushall (2 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: client evicted due to large argv (34 ms) [ok]: client evicted due to large query buf (23 ms) [ok]: client evicted due to percentage of maxmemory (7 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: client evicted due to large multi buf (126 ms) [ok]: Default bind address configuration handling (206 ms) [ok]: Protected mode works as expected (3 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (199 ms) [ok]: Tracking info is correct (2 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (1 ms) [ok]: Regression test for #11715 (2 ms) [ok]: RESP3 based basic invalidation with client reply off (1 ms) [ok]: RESP2 based basic invalidation with client reply off (47 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (1 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (1 ms) [ok]: client evicted due to watched key list (90 ms) [63/91 done]: unit/networking (1 seconds) Testing unit/violations [ok]: Coverage: Basic CLIENT CACHING (0 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (1 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: SORT adds integer field to list (1 ms) [ok]: query buffer resized correctly (2856 ms) [ok]: query buffer resized correctly when not idle (26 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (1 ms) [64/91 done]: unit/violations (1 seconds) Testing unit/replybufsize [65/91 done]: unit/tracking (2 seconds) Testing unit/cluster/announced-endpoints [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1101 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (7 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (0 ms) [ok]: client evicted due to pubsub subscriptions (659 ms) [ok]: client evicted due to tracking redirection (37 ms) [ok]: WAITAOF local copy before fsync (94 ms) [ok]: WAITAOF local copy everysec (1 ms) [ok]: WAITAOF local copy with appendfsync always (0 ms) [ok]: WAITAOF local wait and then stop aof (1 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: Lua scripts eviction does not generate many scripts (49 ms) [ok]: Lua scripts eviction is plain LRU (24 ms) [ok]: WAITAOF local if AOFRW was postponed (301 ms) [ok]: verify reply buffer limits (646 ms) [ok]: Lua scripts eviction does not affect script load (57 ms) [66/91 done]: unit/replybufsize (0 seconds) Testing unit/cluster/misc [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: WAITAOF replica copy before fsync (82 ms) [ok]: Script block the time in some expiration related commands (81 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: PSYNC2 #3899 regression: verify consistency (16 ms) [ok]: Shebang support for lua engine (0 ms) [ok]: Unknown shebang option (1 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (1 ms) [ok]: no-writes shebang flag (0 ms) [ok]: no-writes shebang flag on replica (103 ms) [ok]: not enough good replicas (0 ms) [ok]: client evicted due to client tracking prefixes (1251 ms) [ok]: client evicted due to output buf (10 ms) [ok]: client no-evict on (20 ms) [ok]: client no-evict off (23 ms) [ok]: WAITAOF replica copy everysec (711 ms) [ok]: avoid client eviction when client is freed by output buffer limit (54 ms) [ok]: not enough good replicas state change during long script (524 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (3 ms) [67/91 done]: integration/psync2-reg (23 seconds) Testing unit/cluster/cli [ok]: Consistent eval error reporting (7 ms) [ok]: LUA redict.error_reply API (0 ms) [ok]: LUA redict.error_reply API with empty string (1 ms) [ok]: LUA redict.status_reply API (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (0 ms) [68/91 done]: unit/scripting (14 seconds) Testing unit/cluster/scripting [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (101 ms) [ok]: decrease maxmemory-clients causes client eviction (477 ms) [ok]: Test change cluster-announce-bus-port at runtime (201 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1003 ms) [ok]: evict clients only until below limit (79 ms) [ok]: query buffer resized correctly with fat argv (2979 ms) [69/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/hostnames [ok]: evict clients in right order (large to small) (91 ms) [70/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/human-announced-nodename [ok]: Key lazy expires during key migration (13 ms) [ok]: Coverage: Basic cluster commands (1 ms) [ok]: client total memory grows during client no-evict (125 ms) [ok]: client total memory grows during maxmemory-clients disabled (124 ms) [71/91 done]: unit/client-eviction (4 seconds) Testing unit/cluster/multi-slot-operations [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (5029 ms) [ok]: No response for single command if client output buffer hard limit is enforced (113 ms) [72/91 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/slot-ownership [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (1 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (0 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (0 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [ok]: Create 3 node cluster (1916 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Perform a Resharding (5 ms) [ok]: Verify command got unblocked after resharding (51 ms) [ok]: Wait for cluster to be stable (8 ms) [73/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/links [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (4 ms) [ok]: Sanity test push cmd after resharding (0 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2011 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (103 ms) [ok]: WAITAOF replica copy appendfsync always (1 ms) [ok]: ziplist implementation: encoding stress testing (6234 ms) [74/91 done]: unit/type/list-3 (45 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1045 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (13 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (12 ms) [ok]: Obuf limit, KEYS stopped mid-run (57 ms) [76/91 done]: unit/obuf-limits (14 seconds) [ok]: Set cluster human announced nodename and let it propagate (103 ms) [ok]: WAITAOF replica copy if replica is blocked (899 ms) [ok]: Set cluster hostnames and verify they are propagated (208 ms) [ok]: Continuous slots distribution (7 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (3 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 220332) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #0 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Update hostnames and make sure they are all eventually propagated (207 ms) [ok]: Kill a cluster node and wait for fail state (1716 ms) [ok]: Verify command got unblocked after cluster failure (8 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (206 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9411 ms) [77/91 done]: unit/cluster/multi-slot-operations (3 seconds) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (205 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (104 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1002 ms) [ok]: WAITAOF on promoted replica (1 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (6 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (104 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (1014 ms) [ok]: Test restart will keep hostname information (173 ms) [ok]: Test hostname validation (0 ms) [78/91 done]: unit/cluster/slot-ownership (3 seconds) [79/91 done]: unit/cluster/hostnames (5 seconds) [ok]: WAITAOF master that loses a replica and backlog is dropped (2002 ms) [ok]: Human nodenames are visible in log messages (3517 ms) [80/91 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: Each node has two links with each peer (3 ms) [ok]: Validate cluster links format (0 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (1003 ms) [ok]: Functions are added to new node on redict-cli cluster add-node (2995 ms) [ok]: Verify that single primary marks replica as failed (3126 ms) [ok]: WAITAOF master isn't configured to do AOF (1002 ms) [ok]: WAITAOF replica isn't configured to do AOF (102 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 285308) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (901 ms) [ok]: GEOSEARCH fuzzy test - byradius (19071 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [ok]: WAITAOF master sends PING after last write (1201 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6261 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: WAITAOF master client didn't send any write command (1201 ms) [ok]: Migrate the last slot away from a node using redict-cli (3826 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (15034 ms) [ok]: WAITAOF master client didn't send any command (1200 ms) [ok]: redict-cli -4 --cluster create using 127.0.0.1 with cluster-port (1917 ms) [ok]: redict-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (1174 ms) [ok]: AOF rewrite during write load: RDB preamble=no (36852 ms) [ok]: Turning off AOF kills the background writing child if any (103 ms) [ok]: AOF rewrite of list with listpack encoding, string data (103 ms) [ok]: WAITAOF when replica switches between masters, fsync: no (3327 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (105 ms) [ok]: Verify that multiple primaries mark replica as failed (6154 ms) [ok]: AOF rewrite of list with listpack encoding, int data (103 ms) [81/91 done]: unit/cluster/failure-marking (14 seconds) [ok]: AOF rewrite of list with quicklist encoding, int data (115 ms) [ok]: AOF rewrite of set with intset encoding, string data (103 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (183 ms) [ok]: AOF rewrite of set with intset encoding, int data (102 ms) [ok]: Disconnect link when send buffer limit reached (10007 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (94 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (103 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (127 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (103 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (192 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 353007) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: Bring the master back again for next test (2 ms) [ok]: Link memory increases with publishes (595 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (103 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (183 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (186 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (103 ms) [ok]: Link memory resets after publish messages flush (435 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (144 ms) [ok]: AOF rewrite functions (51 ms) [82/91 done]: unit/cluster/links (16 seconds) [ok]: redict-cli -4 --cluster create using localhost with cluster-port (1919 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (210 ms) [ok]: BGREWRITEAOF is refused if already in progress (8 ms) [83/91 done]: unit/aofrw (57 seconds) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2329 ms) [84/91 done]: integration/psync2 (42 seconds) [ok]: redict-cli -4 --cluster add-node using localhost with cluster-port (1176 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7836 ms) [85/91 done]: unit/cluster/cli (20 seconds) [ok]: WAITAOF when replica switches between masters, fsync: always (1324 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: setup replication for following tests (102 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (683 ms) [ok]: GEOSEARCH fuzzy test - bybox (11739 ms) [ok]: GEOSEARCH box edges fuzzy test (27 ms) [86/91 done]: unit/geo (31 seconds) [87/91 done]: unit/wait (27 seconds) [ok]: slave buffer are counted correctly (29182 ms) [ok]: replica buffer don't induce eviction (4355 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (148 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (15545 ms) [ok]: client tracking don't cause eviction feedback loop (1257 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9400 ms) [ok]: propagation with eviction (97 ms) [ok]: propagation with eviction in MULTI (97 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: lru/lfu value of the key just added (0 ms) [88/91 done]: unit/maxmemory (43 seconds) [ok]: Fuzzing dense/sparse encoding: Redict should always detect errors (43906 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (0 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9385 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (3331 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (38 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1243 ms) [ok]: Slave should be able to synchronize with the master (803 ms) [ok]: Detect write load to master (0 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (934 ms) [ok]: PFADD / PFCOUNT cache invalidation works (0 ms) [89/91 done]: unit/hyperloglog (50 seconds) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (14914 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6305 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (7871 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (19564 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (425 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9405 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (1 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (329 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (870 ms) [ok]: Busy script during async loading (859 ms) [ok]: Blocked commands and configs during async-loading (439 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 38490 to exit... Waiting for process 38490 to exit... Waiting for process 38490 to exit... Waiting for process 38490 to exit... [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9507 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (40 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6313 ms) [ok]: Slave should be able to synchronize with the master (1808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7923 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9432 ms) Waiting for process 39031 to exit... [ok]: diskless loading short read (32172 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless no replicas drop during rdb pipe (6164 ms) [ok]: diskless slow replicas drop during rdb pipe (2550 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10580 ms) [90/91 done]: integration/replication-psync (151 seconds) [ok]: diskless fast replicas drop during rdb pipe (4594 ms) [ok]: diskless all replicas drop during rdb pipe (1652 ms) [ok]: diskless timeout replicas drop during rdb pipe (6045 ms) [ok]: diskless replication child being killed is collected (1450 ms) [ok]: replication child dies when parent is killed - diskless: yes (1146 ms) [ok]: replication child dies when parent is killed - diskless: no (1341 ms) [ok]: diskless replication read pipe cleanup (850 ms) [ok]: replicaof right after disconnection (1819 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (920 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (1 ms) [ok]: Discard cache master before loading transferred RDB when full sync (103 ms) [ok]: replica can handle EINTR if use diskless load (635 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (145 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (92 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (104 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (103 ms) [ok]: PSYNC with wrong offset should throw error (0 ms) [ok]: Test replication with lazy expire (111 ms) [91/91 done]: integration/replication (175 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (1 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [91/91 done]: defrag (2 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (2 seconds) The End Execution time of different units: 1 seconds - unit/printver 1 seconds - unit/info-command 1 seconds - unit/type/incr 1 seconds - unit/protocol 2 seconds - unit/keyspace 2 seconds - unit/auth 3 seconds - unit/info 0 seconds - unit/quit 3 seconds - unit/type/hash 2 seconds - unit/acl 5 seconds - unit/type/stream-cgroups 1 seconds - unit/acl-v2 7 seconds - unit/type/string 5 seconds - unit/multi 7 seconds - unit/sort 10 seconds - unit/type/list-2 11 seconds - unit/type/set 6 seconds - unit/latency-monitor 11 seconds - unit/other 7 seconds - integration/replication-2 14 seconds - unit/type/list 1 seconds - integration/aof-race 15 seconds - unit/scan 14 seconds - unit/type/stream 16 seconds - unit/expire 18 seconds - unit/type/zset 0 seconds - integration/convert-zipmap-hash-on-load 10 seconds - integration/replication-3 1 seconds - integration/convert-ziplist-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 0 seconds - integration/logging 7 seconds - integration/shutdown 6 seconds - integration/rdb 11 seconds - integration/replication-buffer 23 seconds - unit/dump 10 seconds - integration/aof-multi-part 1 seconds - integration/redict-benchmark 12 seconds - integration/aof 1 seconds - unit/pubsub 5 seconds - integration/failover 7 seconds - integration/psync2-master-restart 1 seconds - unit/pubsubshard 1 seconds - unit/slowlog 3 seconds - integration/dismiss-mem 7 seconds - integration/redict-cli 21 seconds - integration/replication-4 16 seconds - integration/corrupt-dump 1 seconds - unit/limits 26 seconds - integration/block-repl 4 seconds - unit/functions 1 seconds - unit/bitfield 2 seconds - unit/bitops 3 seconds - unit/memefficiency 16 seconds - integration/psync2-pingoff 0 seconds - unit/lazyfree 20 seconds - integration/corrupt-dump-fuzzer 1 seconds - unit/pause 1 seconds - unit/tls 8 seconds - unit/introspection-2 0 seconds - unit/oom-score-adj 9 seconds - unit/introspection 1 seconds - unit/shutdown 1 seconds - unit/networking 1 seconds - unit/violations 2 seconds - unit/tracking 0 seconds - unit/replybufsize 23 seconds - integration/psync2-reg 14 seconds - unit/scripting 6 seconds - unit/querybuf 3 seconds - unit/cluster/announced-endpoints 4 seconds - unit/client-eviction 4 seconds - unit/cluster/misc 2 seconds - unit/cluster/scripting 45 seconds - unit/type/list-3 0 seconds - unit/cluster/cluster-response-tls 14 seconds - unit/obuf-limits 3 seconds - unit/cluster/multi-slot-operations 3 seconds - unit/cluster/slot-ownership 5 seconds - unit/cluster/hostnames 6 seconds - unit/cluster/human-announced-nodename 14 seconds - unit/cluster/failure-marking 16 seconds - unit/cluster/links 57 seconds - unit/aofrw 42 seconds - integration/psync2 20 seconds - unit/cluster/cli 31 seconds - unit/geo 27 seconds - unit/wait 43 seconds - unit/maxmemory 50 seconds - unit/hyperloglog 151 seconds - integration/replication-psync 175 seconds - integration/replication 1 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 2 seconds - defrag 2 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict: Entering fakeroot... make -C src install make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' INSTALL redict-sentinel INSTALL redict-check-rdb Hint: It's a good idea to run 'make test' ;) INSTALL redict-server INSTALL redict-benchmark INSTALL redict-cli INSTALL ../redict.conf INSTALL ../sentinel.conf make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict-benchmark*: Running split function benchmark... '/home/buildozer/aports/community/redict/pkg/redict/usr/bin/redict-benchmark' -> '/home/buildozer/aports/community/redict/pkg/redict-benchmark/usr/bin/redict-benchmark' >>> redict-benchmark*: Preparing subpackage redict-benchmark... >>> redict-benchmark*: Stripping binaries >>> redict-benchmark*: Running postcheck for redict-benchmark >>> redict-cli*: Running split function cli... '/home/buildozer/aports/community/redict/pkg/redict/usr/bin/redict-cli' -> '/home/buildozer/aports/community/redict/pkg/redict-cli/usr/bin/redict-cli' >>> redict-cli*: Preparing subpackage redict-cli... >>> redict-cli*: Stripping binaries >>> redict-cli*: Running postcheck for redict-cli >>> redict-compat*: Running split function compat... >>> redict-compat*: Preparing subpackage redict-compat... >>> redict-compat*: Script found. /bin/sh added as a dependency for redict-compat-7.3.0-r2.apk >>> redict-compat*: Adding .pre-install >>> redict-compat*: Running postcheck for redict-compat >>> redict-openrc*: Running split function openrc... >>> redict-openrc*: Preparing subpackage redict-openrc... >>> redict-openrc*: Running postcheck for redict-openrc >>> redict*: Running postcheck for redict >>> redict*: Preparing package redict... >>> redict*: Stripping binaries >>> redict*: Script found. /bin/sh added as a dependency for redict-7.3.0-r2.apk >>> redict*: Adding .post-install >>> redict*: Adding .pre-install >>> redict-benchmark*: Scanning shared objects >>> redict-cli*: Scanning shared objects >>> redict-compat*: Scanning shared objects >>> redict-openrc*: Scanning shared objects >>> redict*: Scanning shared objects >>> redict-benchmark*: Tracing dependencies... so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-benchmark*: Package size: 336.0 KB >>> redict-benchmark*: Compressing data... >>> redict-benchmark*: Create checksum... >>> redict-benchmark*: Create redict-benchmark-7.3.0-r2.apk >>> redict-cli*: Tracing dependencies... so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-cli*: Package size: 632.0 KB >>> redict-cli*: Compressing data... >>> redict-cli*: Create checksum... >>> redict-cli*: Create redict-cli-7.3.0-r2.apk >>> redict-compat*: Tracing dependencies... !redis !valkey-compat /bin/sh redict-benchmark=7.3.0-r2 redict-cli=7.3.0-r2 redict=7.3.0-r2 >>> redict-compat*: Package size: 12.0 KB >>> redict-compat*: Compressing data... >>> redict-compat*: Create checksum... >>> redict-compat*: Create redict-compat-7.3.0-r2.apk >>> redict-openrc*: Tracing dependencies... >>> redict-openrc*: Package size: 28.0 KB >>> redict-openrc*: Compressing data... >>> redict-openrc*: Create checksum... >>> redict-openrc*: Create redict-openrc-7.3.0-r2.apk >>> redict*: Tracing dependencies... /bin/sh so:libc.musl-aarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict*: Package size: 3.0 MB >>> redict*: Compressing data... >>> redict*: Create checksum... >>> redict*: Create redict-7.3.0-r2.apk >>> redict: Build complete at Mon, 06 May 2024 00:44:01 +0000 elapsed time 0h 3m 31s >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Uninstalling dependencies... (1/8) Purging .makedepends-redict (20240506.004030) (2/8) Purging linux-headers (6.6-r0) (3/8) Purging openssl-dev (3.3.0-r1) (4/8) Purging tcl (8.6.14-r0) (5/8) Purging tzdata (2024a-r1) (6/8) Purging procps-ng (4.0.4-r0) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r0) Executing busybox-1.36.1-r26.trigger OK: 754 MiB in 138 packages >>> redict: Updating the community/aarch64 repository index... >>> redict: Signing the index...