>>> valkey: Building main/valkey 7.2.8-r0 (using abuild 3.13.0-r3) started Fri, 10 Jan 2025 15:16:24 +0000 >>> valkey: Checking sanity of /home/buildozer/aports/main/valkey/APKBUILD... >>> valkey: Analyzing dependencies... >>> valkey: Installing for build: build-base linux-headers openssl-dev tcl procps (1/8) Installing linux-headers (6.6-r0) (2/8) Installing openssl-dev (3.3.2-r1) (3/8) Installing tzdata (2024b-r0) (4/8) Installing tcl (8.6.14-r1) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r0) (7/8) Installing procps-ng (4.0.4-r0) (8/8) Installing .makedepends-valkey (20250110.151624) Executing busybox-1.36.1-r29.trigger OK: 434 MiB in 111 packages >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Cleaning up tmpdir >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/valkey-7.2.8.tar.gz Connecting to distfiles.alpinelinux.org (172.105.82.32:443) wget: server returned error: HTTP/1.1 404 Not Found >>> valkey: Fetching https://github.com/valkey-io/valkey/archive/7.2.8/valkey-7.2.8.tar.gz Connecting to github.com (20.26.156.215:443) Connecting to codeload.github.com (20.26.156.216:443) saving to '/var/cache/distfiles/v3.20/valkey-7.2.8.tar.gz.part' valkey-7.2.8.tar.gz. 9% |*** | 328k 0:00:09 ETA valkey-7.2.8.tar.gz. 100% |********************************| 3353k 0:00:00 ETA '/var/cache/distfiles/v3.20/valkey-7.2.8.tar.gz.part' saved >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.20/valkey-7.2.8.tar.gz >>> valkey: Checking sha512sums... valkey-7.2.8.tar.gz: OK valkey.conf.patch: OK sentinel.conf.patch: OK valkey.initd: OK valkey.confd: OK valkey-sentinel.initd: OK valkey-sentinel.confd: OK >>> valkey: Unpacking /var/cache/distfiles/v3.20/valkey-7.2.8.tar.gz... >>> valkey: valkey.conf.patch patching file valkey.conf >>> valkey: sentinel.conf.patch patching file sentinel.conf cd src && make all make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src' CC Makefile.dep rm -rf valkey-server valkey-sentinel valkey-cli valkey-benchmark valkey-check-rdb valkey-check-aof *.o *.gcda *.gcno *.gcov redis.info lcov-html Makefile.dep *.so rm -f adlist.d quicklist.d ae.d anet.d dict.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d valkey-check-rdb.d valkey-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d valkey-cli.d zmalloc.d release.d ae.d redisassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d valkey-benchmark.d adlist.d dict.d zmalloc.d redisassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDIS_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs >> .make-settings echo SERVER_CFLAGS=-flto=auto >> .make-settings echo SERVER_LDFLAGS=-O3 -flto >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDIS_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -flto=auto -I../deps/hiredis -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs -O3 -flto -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredis linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps' (cd hiredis && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" > .make-ldflags) MAKE hiredis MAKE linenoise cd hiredis && make static USE_SSL=1 cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs" AR="ar rc" make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/hiredis' MAKE hdr_histogram cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic hiredis.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDIS_TEST_SSL -Wall -Wextra -Werror -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/fpconv' make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/linenoise' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/hdr_histogram' ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common -Wl,-z,pack-relative-relocs luac.o print.o liblua.a -lm ar rcs libhiredis.a alloc.o net.o hiredis.o sds.o async.o read.o sockcompat.o ar rcs libhiredis_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/hiredis' make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/deps' CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC valkey-check-rdb.o CC valkey-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC valkey-cli.o CC redisassert.o CC cli_common.o CC cli_commands.o CC valkey-benchmark.o LINK valkey-benchmark LINK valkey-cli LINK valkey-server INSTALL valkey-sentinel INSTALL valkey-check-rdb INSTALL valkey-check-aof Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src' cd src && make test make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src' CC Makefile.dep Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 6472 Testing unit/printver [ready]: 6475 Testing unit/dump [ready]: 6479 Testing unit/auth [ready]: 6470 Testing unit/protocol [ready]: 6471 Testing unit/keyspace [ready]: 6482 Testing unit/scan [ready]: 6473 Testing unit/info [ready]: 6474 Testing unit/info-command [ready]: 6469 Testing unit/type/string [ready]: 6477 Testing unit/type/incr [ready]: 6478 Testing unit/type/list [ready]: 6480 Testing unit/type/list-2 [ready]: 6481 Testing unit/type/list-3 [ready]: 6476 Testing unit/type/set [ready]: 6484 Testing unit/type/zset [ready]: 6483 Testing unit/type/hash Testing Redis version 7.2.4 (00000000) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (1 ms) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (2 ms) [ok]: Arity check for auth command (1 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (1 ms) [ok]: RESTORE can set an absolute expire (0 ms) [ok]: SET and GET an item (1 ms) [ok]: INCR against non existing key (0 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: SET and GET an empty item (1 ms) [ok]: RESTORE with ABSTTL in the past (1 ms) [ok]: DECR against key created by incr (0 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: DEL against a single item (1 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: INCR over 32bit value (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: RESTORE can set LRU (1 ms) [ok]: Vararg DEL (1 ms) [ok]: Explicit regression for a list bug (1 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: Untagged multi-key commands (1 ms) [ok]: info command with at most one sub command (2 ms) [ok]: INCR fails against key with spaces (both) (0 ms) [ok]: RESTORE can set LFU (2 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: info command with one sub-section (1 ms) [ok]: KEYS with pattern (1 ms) [ok]: KEYS to get all keys (0 ms) [ok]: RESTORE returns an error of the key already exists (1 ms) [ok]: INCR fails against a key holding a list (1 ms) [ok]: DBSIZE (0 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: DEL all keys (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (1 ms) [ok]: reg node check compression with insert and pop (3 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (1 ms) [ok]: INCR uses shared objects in the 0-9999 range (2 ms) [ok]: reg node check compression combined with trim (1 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: HSET/HLEN - Small hash creation (2 ms) [ok]: Is the small hash encoded with a listpack? (1 ms) [ok]: reg node check compression with lset (2 ms) [ok]: INCRBYFLOAT against non existing key (1 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (4 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (1 ms) [ok]: Check encoding - listpack (0 ms) [ok]: plain node check compression (2 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (1 ms) [ok]: plain node check compression with ltrim (1 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (1 ms) [ok]: ZSET basic ZADD and score update - listpack (2 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: plain node check compression using lset (1 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: string to double with null terminator (1 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: No negative zero (0 ms) [ok]: ZADD XX option without key - listpack (1 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (1 ms) [ok]: incr operation should update encoding from raw to int (2 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (0 ms) [ok]: incrby operation should update encoding from raw to int (2 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (0 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (1 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms) [ok]: ZADD INCR LT/GT with inf - listpack (2 ms) [ok]: HRANDFIELD - listpack (14 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (1 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZADD - Variadic version base case - listpack (1 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: ZCARD basics - listpack (1 ms) [ok]: ZREM removes key after last element is removed - listpack (1 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (23 ms) [ok]: ZRANGE basics - listpack (2 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (2 ms) [ok]: ZREVRANGE basics - listpack (2 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (1 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: SADD against non set (0 ms) [ok]: ZRANK/ZREVRANK basics - listpack (2 ms) [ok]: ZRANK - after deletion - listpack (1 ms) [ok]: SADD a non-integer against a small intset (1 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: HRANDFIELD - hashtable (14 ms) [ok]: Handle an empty query (43 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: HRANDFIELD with RESP3 (2 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: HRANDFIELD count overflow (1 ms) [ok]: HRANDFIELD with against non existing key (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (5 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (4 ms) [ok]: ZLEXCOUNT advanced - listpack (1 ms) [ok]: SADD a non-integer against a large intset (17 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: ZRANGEBYSLEX with LIMIT - listpack (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (11 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: SADD an integer larger than 64 bits to a large intset (14 ms) [ok]: ZREMRANGEBYRANK basics - listpack (5 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (80 ms) [ok]: ZREMRANGEBYLEX basics - listpack (12 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (0 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (1 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (1 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [1/91 done]: unit/printver (0 seconds) Testing unit/type/stream [2/91 done]: unit/info-command (0 seconds) Testing unit/type/stream-cgroups [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [3/91 done]: unit/type/incr (0 seconds) Testing unit/sort [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: Negative multibulk length (60 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (2 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (1 ms) [ok]: Non-number multibulk payload length (0 ms) [ok]: Multi bulk request not followed by bulk arguments (1 ms) [ok]: Generic wrong number of args (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: Unbalanced number of quotes (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (1 ms) [ok]: latencystats: disable/enable (2 ms) [ok]: latencystats: configure percentiles (2 ms) [ok]: Very big payload in GET/SET (104 ms) [ok]: latencystats: bad configure percentiles (2 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (53 ms) [ok]: latencystats: blocking commands (3 ms) [ok]: SCAN basic (129 ms) [ok]: latencystats: subcommands (2 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (15 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (2 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: Regression for quicklist #3343 bug (159 ms) [ok]: latencystats: measure latency (52 ms) [ok]: errorstats: failed call authentication error (3 ms) [ok]: errorstats: failed call within MULTI/EXEC (4 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (48 ms) [ok]: errorstats: failed call within LUA (3 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (1 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: errorstats: rejected call unknown command (2 ms) [ok]: errorstats: rejected call within MULTI/EXEC (3 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: Protocol desync regression test #1 (100 ms) [ok]: errorstats: rejected call by OOM error (2 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: errorstats: blocking commands (3 ms) [ok]: XADD wrong number of args (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: Arbitrary command gives an error when AUTH is required (1 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (1 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (2 ms) [ok]: XADD IDs correctly report an error when overflowing (1 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (2 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: Check compression with recompress (61 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (1 ms) [ok]: Listpack: SORT BY key (0 ms) [ok]: XREADGROUP can read the history of the elements we own (2 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: XPENDING is able to return pending items (1 ms) [ok]: Listpack: SORT BY hash field (1 ms) [ok]: Test LPUSH and LPOP on plain nodes (4 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: XPENDING only group (1 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: XPENDING with IDLE (21 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (1 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (2 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (2 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (1 ms) [ok]: SCAN COUNT (135 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (25 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (2 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (2 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (2 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (2 ms) [ok]: Blocking XREAD: key type changed with SET (2 ms) [ok]: MIGRATE is caching connections (224 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (15 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (5 ms) [ok]: Protocol desync regression test #2 (114 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (4 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (2 ms) [ok]: stats: eventloop metrics (113 ms) [ok]: XADD with MAXLEN option (133 ms) [ok]: HRANDFIELD with - hashtable (316 ms) [ok]: SCAN MATCH (109 ms) [ok]: Set encoding after DEBUG RELOAD (187 ms) [ok]: SREM basics - $type (1 ms) [ok]: Test LSET with packed / plain combinations (150 ms) [ok]: Test LSET with packed is split in the middle (2 ms) [ok]: SREM basics - $type (16 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (2 ms) [ok]: SINTERCARD against non-set should throw error (1 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: Protocol desync regression test #3 (107 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: RESP3 attributes (1 ms) [ok]: RESP3 attributes readraw (2 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (1 ms) [ok]: test verbatim str parsing (0 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (5 ms) [ok]: Crash due to wrongly recompress after lrem (258 ms) [ok]: XADD with MAXLEN option and the '=' argument (130 ms) [ok]: SUNION with two sets - regular (13 ms) [ok]: test large number of args (62 ms) [ok]: test argument rewriting - issue 9598 (1 ms) [ok]: SUNIONSTORE with two sets - regular (14 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: Quicklist: SORT BY key (19 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: SUNION with non existing keys - regular (14 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (10 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (51 ms) [ok]: Quicklist: SORT BY hash field (20 ms) [ok]: SCAN TYPE (166 ms) [ok]: Test LSET with packed consist only one item (198 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (50 ms) [ok]: Crash due to delete entry from a compress quicklist node (1 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (1 ms) [ok]: XADD with MAXLEN option and the '~' argument (112 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (5 ms) [ok]: SUNION with two sets - intset (20 ms) [ok]: SUNIONSTORE with two sets - intset (19 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SCAN unknown type (111 ms) [ok]: HRANDFIELD with - listpack (290 ms) [ok]: SUNION with non existing keys - intset (20 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (15 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (38 ms) [ok]: SUNION hashtable and listpack (2 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: XADD with MINID option (121 ms) [ok]: SDIFF with same set two times (1 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (0 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: SCAN with expired keys (126 ms) [ok]: LPOS basic usage - quicklist (41 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: HSET/HLEN - Big hash creation (171 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (1 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: SCAN with expired keys with TYPE filter (125 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (106 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: SSCAN with encoding intset (3 ms) [ok]: SSCAN with encoding listpack (2 ms) [ok]: SSCAN with encoding hashtable (7 ms) [ok]: HSCAN with encoding listpack (2 ms) [ok]: HGET against the big hash (117 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (1 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (1 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (1 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (59 ms) [ok]: LPOS basic usage - listpack (1 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (1 ms) [ok]: LPOS COUNT option (0 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (2 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (0 ms) [ok]: HSCAN with encoding hashtable (92 ms) [ok]: ZSCAN with encoding listpack (3 ms) [ok]: BLPOP: single existing list - quicklist (45 ms) [ok]: HMSET - big hash (76 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (2 ms) [ok]: HMGET - small hash (1 ms) [ok]: HMGET - big hash (73 ms) [ok]: HKEYS - small hash (0 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (1 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: ZSCAN with encoding skiplist (99 ms) [ok]: RENAME against already existing key (1 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (1 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (0 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (1 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (1 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (1 ms) [ok]: COPY for string does not copy data to no-integer DB (1 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: HKEYS - big hash (19 ms) [ok]: HVALS - small hash (0 ms) [ok]: BLPOP: multiple existing lists - quicklist (100 ms) [ok]: SCAN guarantees check under write load (31 ms) [ok]: SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: SSCAN with PATTERN (1 ms) [ok]: HSCAN with PATTERN (0 ms) [ok]: HVALS - big hash (3 ms) [ok]: ZSCAN with PATTERN (1 ms) [ok]: HGETALL - small hash (0 ms) [ok]: COPY basic usage for list - quicklist (41 ms) [ok]: COPY basic usage for list - listpack (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: BLPOP: second list has an entry - quicklist (49 ms) [ok]: COPY basic usage for $type set (21 ms) [ok]: HGETALL - big hash (44 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (1 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (1 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (1 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (1 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: COPY basic usage for skiplist sorted set (15 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: ZSCAN scores: regression test for issue #2175 (76 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (50 ms) [ok]: COPY basic usage for hashtable hash (22 ms) [ok]: HSTRLEN against the big hash (102 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (3 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (3 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (100 ms) [ok]: Hash fuzzing #1 - 10 fields (45 ms) [ok]: COPY basic usage for stream (149 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (60 ms) [ok]: Hash fuzzing #2 - 10 fields (29 ms) [ok]: COPY basic usage for stream-cgroups (11 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (1 ms) [ok]: MOVE can move key expire metadata as well (1 ms) [ok]: MOVE does not create an expire if it does not exist (1 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (10 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (1 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1091 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (3 ms) [ok]: RENAME can unblock XREADGROUP with data (1 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (1 ms) [ok]: BRPOPLPUSH - quicklist (50 ms) [ok]: MASTERAUTH test with binary password (909 ms) [ok]: BLMOVE left left - quicklist (50 ms) [ok]: Regression for pattern matching very long nested loops (96 ms) [ok]: BLMOVE left right - quicklist (50 ms) [ok]: BLMOVE right left - quicklist (50 ms) [5/91 done]: unit/keyspace (2 seconds) Testing unit/other [ok]: BLMOVE right right - quicklist (50 ms) [ok]: BLPOP: single existing list - listpack (2 ms) [ok]: BLPOP: multiple existing lists - listpack (3 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (2 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (2 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: BLMOVE left left - listpack (1 ms) [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: BLMOVE left right - listpack (2 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (2 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (1 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (1 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (2 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (1 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (2 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (1 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [ok]: BLMPOP with multiple blocked clients (4 ms) [ok]: Linked LMOVEs (2 ms) [ok]: Circular BRPOPLPUSH (2 ms) [ok]: Self-referential BRPOPLPUSH (1 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (2 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: Coverage: HELP commands (4 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: SAVE - make sure there are all the types as values (2 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (0 ms) [ok]: Nested MULTI are not allowed (0 ms) [ok]: MULTI where commands alter argc/argv (1 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (2 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (0 ms) [ok]: EXEC works on WATCHed key not modified (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (2 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (4 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (4 ms) [ok]: WATCH is able to remember the DB a key belongs to (1 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [ok]: stats: instantaneous metrics (1603 ms) [ok]: XCLAIM can claim PEL items from another consumer (604 ms) [ok]: stats: debug metrics (113 ms) [7/91 done]: unit/info (2 seconds) Testing unit/quit [ok]: QUIT returns OK (0 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: XCLAIM without JUSTID increments delivery count (404 ms) [8/91 done]: unit/quit (1 seconds) Testing unit/aofrw [ok]: XCLAIM same consumer (201 ms) [ok]: BRPOPLPUSH timeout (1019 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: FUZZ stresser with data model binary (998 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (141 ms) [ok]: WATCH will consider touched expired keys (1106 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2101 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (1 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (1 ms) [ok]: MULTI / EXEC is not propagated (single write command) (52 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (299 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (101 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (604 ms) [ok]: XADD mass insertion and XLEN (2516 ms) [ok]: XADD with ID 0-0 (1 ms) [ok]: XADD with LIMIT delete entries no more than limit (0 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (101 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (100 ms) [ok]: XAUTOCLAIM as an iterator (205 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (2 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (2 ms) [ok]: XAUTOCLAIM with XDEL and count (3 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XINFO FULL output (8 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (101 ms) [ok]: Consumer seen-time and active-time (209 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (4 ms) [ok]: MULTI / EXEC with REPLICAOF (102 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: XREADGROUP with NOACK creates consumer (5 ms) [ok]: Hash fuzzing #1 - 512 fields (2439 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (107 ms) [ok]: FUZZ stresser with data model alpha (1178 ms) [ok]: Big Quicklist: SORT BY key (539 ms) [ok]: Big Quicklist: SORT BY key with limit (12 ms) [ok]: Consumer group read counter and lag in empty streams (2 ms) [ok]: XRANGE can be used to iterate the whole stream (761 ms) [ok]: Consumer group read counter and lag sanity (8 ms) [ok]: Consumer group lag with XDELs (15 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (2 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: MULTI and script timeout (406 ms) [ok]: SETEX - Wait for the key to expire (1100 ms) [ok]: SETEX - Wrong time parameter (1 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BLPOP when new key is moved into place (2 ms) [ok]: BLPOP when result key is created by SORT..STORE (2 ms) [ok]: BLMPOP_LEFT when new key is moved into place (2 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (110 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (105 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (3 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: BLPOP: with non-integer timeout (2 ms) [ok]: BLPOP: with zero timeout should block indefinitely (2 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (23 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (107 ms) [ok]: EXEC and script timeout (408 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=0) (107 ms) [ok]: Replication tests of XCLAIM with deleted entries (autclaim=1) (6 ms) [ok]: Big Quicklist: SORT BY hash field (723 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (1 ms) [ok]: MULTI-EXEC body and script timeout (404 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (105 ms) [ok]: Hash table: SORT BY key (22 ms) [ok]: Hash table: SORT BY key with limit (2 ms) [ok]: Hash table: SORT BY hash field (23 ms) [9/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/acl [ok]: EXPIRE precision is now the millisecond (1102 ms) [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (1 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (1 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (0 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (1 ms) [ok]: Test hashed passwords removal (1 ms) [ok]: By default users are not able to access any command (0 ms) [ok]: By default users are not able to access any key (1 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (1 ms) [ok]: FUZZ stresser with data model compr (1368 ms) [ok]: By default, only default user is able to subscribe to any channel (1 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: It's possible to allow publishing to a subset of channels (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (2 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (1 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (1 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: Subscribers are killed when revoked of channel permission (2 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: Subscribers are killed when revoked of allchannels permission (2 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (2 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: ACLs can exclude single commands (1 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: just EXEC and script timeout (406 ms) [ok]: ACLs can exclude single subcommands, case 1 (2 ms) [ok]: exec with write commands and state change (2 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container command with two args (1 ms) [ok]: exec with read commands and stale replica state change (3 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (2 ms) [ok]: EXEC with only read commands should not be rejected when OOM (2 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (2 ms) [ok]: ACLs set can include subcommands, if already full command exists (3 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (5 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (2 ms) [ok]: ACL GETUSER is able to translate back command permissions (2 ms) [ok]: ACL GETUSER provides reasonable results (28 ms) [ok]: ACL GETUSER provides correct results (9 ms) [ok]: ACL CAT with illegal arguments (1 ms) [ok]: ACL CAT without category - list all categories (1 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (2 ms) [ok]: PSETEX can set sub-second expires (102 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (0 ms) [ok]: BLPOP: timeout (1055 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: BLPOP: arguments are empty (3 ms) [ok]: BRPOP: with single empty list argument (2 ms) [ok]: BRPOP: with negative timeout (0 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (10 ms) [ok]: ACL LOG shows failed command executions at toplevel (2 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (2 ms) [ok]: ACL LOG is able to log keys access violations and key name (2 ms) [ok]: ACL LOG is able to log channel access violations and channel name (2 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (1 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (2 ms) [ok]: ACL can log errors in the context of Lua scripting (2 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (2 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (5 ms) [ok]: ACL LOG can log failed auth attempts (3 ms) [ok]: MULTI propagation of PUBLISH (90 ms) [ok]: ACL LOG entries are limited to a maximum amount (6 ms) [ok]: When default user is off, new connections are not authenticated (1 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (2 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (1 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (1 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (1 ms) [ok]: ACL-Metrics user AUTH failure (7 ms) [ok]: ACL-Metrics invalid command accesses (4 ms) [ok]: ACL-Metrics invalid key accesses (5 ms) [ok]: ACL-Metrics invalid channels accesses (4 ms) [ok]: Very big payload random access (5337 ms) [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: Hash fuzzing #2 - 512 fields (1690 ms) [ok]: BGSAVE (54 ms) [ok]: SELECT an out of range DB (0 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (1 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL load and save (3 ms) [ok]: ACL load and save with restricted channels (2 ms) [ok]: MULTI propagation of EVAL (101 ms) [ok]: PEXPIREAT can set sub-second expires (203 ms) [ok]: TTL returns time to live in seconds (0 ms) [ok]: PTTL returns time to live in milliseconds (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (1 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (1 ms) [ok]: MULTI propagation of SCRIPT FLUSH (101 ms) [ok]: Default user has access to all channels irrespective of flag (1 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (2 ms) [ok]: Single channel is valid (0 ms) [ok]: Single channel is not valid with allchannels (1 ms) [ok]: MULTI propagation of XREADGROUP (103 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (1 ms) [ok]: MULTI with BGREWRITEAOF (204 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: MULTI with config set appendonly (207 ms) [ok]: MULTI with config error (1 ms) [ok]: Flushall while watching several keys by one client (1 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: Redis should actively expire keys incrementally (604 ms) [ok]: MULTI with FLUSHALL and AOF (3 ms) [ok]: BRPOP: timeout (1070 ms) [ok]: BRPOP: arguments are empty (4 ms) [ok]: BLMPOP_LEFT: with single empty list argument (2 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (2 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: XREVRANGE returns the reverse of XRANGE (2543 ms) [10/91 done]: unit/multi (5 seconds) Testing unit/acl-v2 [ok]: XRANGE exclusive ranges (5 ms) [ok]: XREAD with non empty stream (1 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: Test basic multiple selectors (2 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (2 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (3 ms) [ok]: Test separate read permission (2 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (1 ms) [ok]: Validate read and write permissions format - empty permission (0 ms) [ok]: Validate read and write permissions format - empty selector (1 ms) [ok]: Validate read and write permissions format - empty pattern (0 ms) [ok]: Validate read and write permissions format - no pattern (1 ms) [ok]: Test separate read and write permissions on different selectors are not additive (2 ms) [ok]: Test SET with separate read permission (2 ms) [ok]: Test SET with separate write permission (2 ms) [ok]: Test SET with read and write permissions (2 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (2 ms) [ok]: Test loading an ACL file with duplicate users (4 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (4 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Test ACL list idempotency (2 ms) [ok]: Test loading an ACL file with duplicate default user (3 ms) [ok]: Test R+W is the same as all permissions (1 ms) [ok]: Test basic dry run functionality (1 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: Test various odd commands for key permissions (5 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (2 ms) [ok]: Cardinality commands require some type of permission to execute (2 ms) [ok]: Test loading duplicate users in config on startup (13 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (3 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: Test behavior of loading ACLs (2 ms) [ok]: ZDIFF fuzzing - listpack (6813 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (2 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (2 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (1 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (1 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (1 ms) [ok]: ZADD XX updates existing elements score - skiplist (0 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (1 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (1 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (1 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (0 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (2 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (1 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (1 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (4 ms) [ok]: ZREVRANGE basics - skiplist (3 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (3 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (1 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [11/91 done]: unit/acl-v2 (0 seconds) Testing unit/latency-monitor [ok]: ZINCRBY return value - skiplist (1 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (7 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (5 ms) [ok]: ZLEXCOUNT advanced - skiplist (3 ms) [ok]: ZRANGEBYSLEX with LIMIT - skiplist (3 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (16 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (7 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (19 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (2 ms) [ok]: ZUNIONSTORE basics - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (2 ms) [ok]: ZUNIONSTORE with weights - skiplist (1 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (1 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (1 ms) [ok]: ZINTER RESP3 - skiplist (1 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (1 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (1 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (1 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: ZDIFF algorithm 2 - skiplist (2 ms) [ok]: LATENCY HISTOGRAM with empty histogram (0 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (2 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (2 ms) [ok]: ACL from config file and config rewrite (207 ms) [ok]: Check consistency of different data types after a reload (1587 ms) [12/91 done]: unit/acl (2 seconds) Testing integration/block-repl [ok]: Redis should lazy expire keys (1002 ms) [ok]: Same dataset digest if saving/reloading as AOF? (335 ms) [ok]: BLMPOP_LEFT: timeout (1067 ms) [ok]: BLMPOP_LEFT: arguments are empty (3 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (2 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (107 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: SDIFF fuzzing (7115 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (1 ms) [ok]: SDIFFSTORE against non-set should throw error (2 ms) [ok]: SDIFFSTORE should handle non existing key as empty (2 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (2 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (1 ms) [ok]: SUNION should handle non existing key as empty (0 ms) [ok]: SUNIONSTORE against non-set should throw error (2 ms) [ok]: SUNIONSTORE should handle non existing key as empty (2 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (1 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (2395 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: SRANDMEMBER - listpack (10 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (1 ms) [ok]: SRANDMEMBER - intset (10 ms) [ok]: SPOP integer from listpack set (1 ms) [ok]: SPOP with - listpack (4 ms) [ok]: SPOP with - intset (4 ms) [ok]: SPOP with - hashtable (4 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (4 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (3 ms) [ok]: SPOP new implementation: code path #2 intset (3 ms) [ok]: SPOP new implementation: code path #3 intset (3 ms) [ok]: SPOP new implementation: code path #1 listpack (3 ms) [ok]: SPOP new implementation: code path #2 listpack (3 ms) [ok]: SPOP new implementation: code path #3 listpack (3 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (101 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (1 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (1 ms) [ok]: SRANDMEMBER with - listpack (41 ms) [ok]: SRANDMEMBER with - intset (29 ms) [ok]: XREAD with non empty second stream (1543 ms) [ok]: Blocking XREAD waiting new data (2 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: SRANDMEMBER with - hashtable (46 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (2676 ms) [ok]: Blocking XREAD will not reply with an empty array (98 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (1 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (101 ms) [ok]: XREAD: XADD + DEL should not awake client (2 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (2 ms) [ok]: XREAD with same stream name multiple times should work (1 ms) [ok]: Hash ziplist of various encodings (112 ms) [ok]: XREAD + multiple XADD inside transaction (3 ms) [ok]: XDEL basic test (1 ms) [ok]: SRANDMEMBER histogram distribution - listpack (170 ms) [ok]: XDEL multiply id test (1 ms) [ok]: Hash ziplist of various encodings - sanitize dump (4 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [13/91 done]: unit/type/hash (9 seconds) Testing integration/replication [ok]: First server should have role slave after SLAVEOF (1002 ms) [ok]: SRANDMEMBER histogram distribution - intset (185 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: BLMPOP_RIGHT: timeout (1071 ms) [ok]: BLMPOP_RIGHT: arguments are empty (4 ms) [ok]: BLPOP inside a transaction (2 ms) [ok]: BLMPOP_LEFT inside a transaction (3 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (207 ms) [ok]: BLMPOP propagate as pop with count command to replica (194 ms) [ok]: LPUSHX, RPUSHX - generic (2 ms) [ok]: LPUSHX, RPUSHX - quicklist (46 ms) [ok]: LINSERT - quicklist (69 ms) [ok]: LPUSHX, RPUSHX - listpack (3 ms) [ok]: LINSERT - listpack (6 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (1 ms) [ok]: LINSERT against non existing key (1 ms) [ok]: LINDEX consistency test - listpack (206 ms) [ok]: LINDEX random access - listpack (113 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (188 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2108 ms) [ok]: LINDEX consistency test - listpack (242 ms) [ok]: Big Hash table: SORT BY key (920 ms) [ok]: Big Hash table: SORT BY key with limit (29 ms) [ok]: LINDEX random access - listpack (175 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (277 ms) [ok]: LINDEX consistency test - quicklist (65 ms) [ok]: LINDEX random access - quicklist (47 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (98 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2018 ms) [ok]: Big Hash table: SORT BY hash field (626 ms) [ok]: SORT GET # (0 ms) [ok]: SORT GET (1 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (4 ms) [ok]: SORT BY key STORE (1 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: SORT regression for issue #19, sorting floats (16 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (1 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (0 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (1 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (1 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (1 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Test latency events logging (3403 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: LATENCY LATEST output is ok (1 ms) [ok]: LATENCY GRAPH can output the event graph (1 ms) [ok]: SORT speed, 100 element list BY key, 100 times (37 ms) [ok]: LINDEX consistency test - quicklist (151 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (53 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (10014 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (56 ms) [ok]: SORT speed, 100 element list directly, 100 times (35 ms) [ok]: LINDEX random access - quicklist (104 ms) [ok]: SORT speed, 100 element list BY , 100 times (34 ms) [ok]: SETRANGE with huge offset (3 ms) [ok]: First server should have role slave after REPLICAOF (1 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (8 ms) [14/91 done]: unit/sort (11 seconds) Testing integration/replication-2 [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (211 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (1 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (46 ms) [ok]: LMOVE left left base case - quicklist (50 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (293 ms) [ok]: LMOVE left right base case - quicklist (50 ms) [ok]: LMOVE right left base case - quicklist (59 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: If min-slaves-to-write is honored, write is accepted (0 ms) [ok]: No write if min-slaves-to-write is < attached slaves (1 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (0 ms) [ok]: LMOVE right right base case - quicklist (50 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (49 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (49 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (50 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (50 ms) [ok]: SETNX against expired volatile key (3488 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (0 ms) [ok]: GETEX EXAT option (1 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (1 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (49 ms) [ok]: GETDEL propagate as DEL command to replica (86 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (99 ms) [ok]: GETEX without argument does not propagate to replica (101 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (1859 ms) [ok]: APPEND basics (1 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: MGET (11 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (0 ms) [ok]: GETSET (set new value) (1 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (1 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (1 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (1 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (1 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (0 ms) [ok]: SETBIT with out of range bit offset (1 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (100 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (100 ms) [ok]: SCAN regression test for issue #4906 (10503 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (100 ms) [15/91 done]: unit/scan (12 seconds) Testing integration/replication-3 [ok]: LMOVE right right with quicklist source and existing target quicklist (99 ms) [ok]: APPEND fuzzing (344 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (50 ms) [ok]: FLUSHDB (51 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (1 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (1 ms) [ok]: RESET clears Pub/Sub state (1 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (50 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (50 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (49 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (49 ms) [ok]: RPOPLPUSH base case - listpack (2 ms) [ok]: LMOVE left left base case - listpack (2 ms) [ok]: LMOVE left right base case - listpack (2 ms) [ok]: LMOVE right left base case - listpack (2 ms) [ok]: LMOVE right right base case - listpack (2 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (2 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (2 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (2 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (51 ms) [ok]: SETBIT fuzzing (674 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (1 ms) [ok]: GETBIT against integer-encoded key (2 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (2 ms) [ok]: SETRANGE against integer-encoded key (3 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (1 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (51 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (50 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (50 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (50 ms) [ok]: XDEL fuzz test (4107 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (3 ms) [ok]: LMOVE left left with listpack source and existing target listpack (2 ms) [ok]: LMOVE left right with listpack source and existing target listpack (2 ms) [ok]: LMOVE right left with listpack source and existing target listpack (2 ms) [ok]: LMOVE right right with listpack source and existing target listpack (2 ms) [ok]: RPOPLPUSH against non existing key (1 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (45 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (1 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (97 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (3 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (3 ms) [ok]: Mass RPOP/LPOP - listpack (123 ms) [ok]: Mass RPOP/LPOP - listpack (252 ms) [ok]: LMPOP with illegal argument (6 ms) [ok]: Don't rehash if redis has child process (814 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2004 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (2 ms) [ok]: LMPOP single existing list - quicklist (172 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (73 ms) [ok]: EXPIRE with NX option on a key with ttl (1 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (1 ms) [ok]: EXPIRE with XX option on a key without ttl (1 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (1 ms) [ok]: EXPIRE with LT option on a key without ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (1 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (1 ms) [ok]: EXPIRE with conflicting options: NX LT (0 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (1 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (1 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: Process title set as expected (3 ms) [ok]: Redis should not propagate the read command on lazy expire (81 ms) [16/91 done]: unit/other (12 seconds) Testing integration/replication-4 [ok]: LMPOP multiple existing lists - quicklist (230 ms) [ok]: LMPOP single existing list - listpack (8 ms) [ok]: LMPOP multiple existing lists - listpack (9 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (99 ms) [ok]: LMPOP propagate as pop with count command to replica (18 ms) [ok]: LRANGE basics - quicklist (55 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: LRANGE inverted indexes - quicklist (48 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (49 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [17/91 done]: unit/expire (13 seconds) Testing integration/replication-psync [ok]: LRANGE out of range negative end index - quicklist (61 ms) [ok]: LRANGE basics - listpack (4 ms) [ok]: LRANGE inverted indexes - listpack (3 ms) [ok]: LRANGE out of range indexes including the full list - listpack (2 ms) [ok]: LRANGE out of range negative end index - listpack (2 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: Slave should be able to synchronize with the master (103 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2853 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: LTRIM basics - quicklist (642 ms) [ok]: LTRIM out of range negative end index - quicklist (100 ms) [ok]: LSET - quicklist (51 ms) [ok]: LSET out of range index - quicklist (1 ms) [ok]: LTRIM basics - listpack (32 ms) [ok]: LTRIM out of range negative end index - listpack (5 ms) [ok]: LSET - listpack (2 ms) [ok]: LSET out of range index - listpack (1 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (1 ms) [ok]: LREM remove all the occurrences - quicklist (48 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (1 ms) [ok]: LREM starting from tail with negative count - quicklist (48 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (1 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (56 ms) [ok]: LREM remove all the occurrences - listpack (3 ms) [ok]: LREM remove the first occurrence - listpack (1 ms) [ok]: LREM remove non existing element - listpack (1 ms) [ok]: LREM starting from tail with negative count - listpack (4 ms) [ok]: LREM starting from tail with negative count (2) - listpack (1 ms) [ok]: LREM deleting objects that may be int encoded - listpack (2 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (5 ms) [ok]: BLPOP/BLMOVE should increase dirty (7 ms) [ok]: client unblock tests (13 ms) [ok]: client unblock tests (110 ms) [ok]: List listpack -> quicklist encoding conversion (10 ms) [ok]: Detect write load to master (1002 ms) [ok]: List listpack -> quicklist encoding conversion (211 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (47 ms) [ok]: List quicklist -> listpack encoding conversion (289 ms) [ok]: List encoding conversion when RDB loading (10 ms) [ok]: MIGRATE cached connections are released after some time (15003 ms) [ok]: List invalid list-max-listpack-size config (49 ms) [ok]: List of various encodings (119 ms) [ok]: List of various encodings - sanitize dump (8 ms) [ok]: Unblock fairness is kept while pipelining (5 ms) [ok]: Unblock fairness is kept during nested unblock (6 ms) [ok]: Blocking command accounted only once in commandstats (4 ms) [ok]: Blocking command accounted only once in commandstats after timeout (3 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (25 ms) [ok]: MIGRATE is able to migrate a key between two instances (238 ms) [18/91 done]: unit/type/list (16 seconds) Testing integration/replication-buffer [ok]: MIGRATE is able to copy a key between two instances (236 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (240 ms) [ok]: GETRANGE fuzzing (4015 ms) [ok]: MIGRATE propagates TTL correctly (241 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (2 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (1 ms) [ok]: Extended SET GET option with XX (1 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (1 ms) [ok]: Extended SET GET option with NX and previous value (1 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (1 ms) [ok]: Extended SET PX option (1 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (1 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (1 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (2 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (2 ms) [19/91 done]: unit/type/string (17 seconds) Testing integration/shutdown [ok]: Detect write load to master (1001 ms) [ok]: ZDIFF fuzzing - skiplist (10205 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (1 ms) [ok]: ZPOPMIN with negative count (2 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (1 ms) [ok]: ZPOPMAX with negative count (2 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (3 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (2 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (4 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (3 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (4 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (3 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (4 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (3 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (3 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (3 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (3 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (3 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (5 ms) [ok]: ZPOP/ZMPOP against wrong type (4 ms) [ok]: ZMPOP with illegal argument (6 ms) [ok]: ZMPOP propagate as pop with count command to replica (88 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (3 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (191 ms) [ok]: ZMPOP readraw in RESP3 (4 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (15054 ms) [ok]: BZMPOP readraw in RESP3 (196 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (3 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (195 ms) [ok]: ZMPOP readraw in RESP2 (6 ms) [ok]: BZMPOP readraw in RESP2 (195 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (1 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (1 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (2 ms) [ok]: All replicas share one global replication buffer (220 ms) [ok]: Replication buffer will become smaller when no replica uses (6 ms) [ok]: ZUNIONSTORE result is sorted (241 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (1 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (1 ms) [ok]: ZMSCORE retrieve requires one or more members (1 ms) [ok]: ZSET commands don't accept the empty strings as valid score (1 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (2 ms) [ok]: ZSCORE - listpack (55 ms) [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: ZMSCORE - listpack (61 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (75 ms) [ok]: Test replication with parallel clients writing in different DBs (5204 ms) [ok]: ZSET sorting stresser - listpack (88 ms) [ok]: LTRIM stress testing - quicklist (19059 ms) [ok]: Set instance A as slave of B (101 ms) [ok]: INCRBYFLOAT replication, should not remove expire (2 ms) [ok]: GETSET replication (3 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (3 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (2830 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (1 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: BRPOPLPUSH replication, list exists (1004 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (2 ms) [ok]: BLMOVE (left, left) replication, list exists (1003 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (10657 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1835 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (2217 ms) [ok]: MASTER and SLAVE consistency with expire (9644 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (125 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2725 ms) [ok]: BLMOVE (left, right) replication, list exists (1003 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (2 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (12174 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (1 ms) [ok]: LATENCY DOCTOR produces some output (0 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (3932 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6257 ms) [20/91 done]: unit/latency-monitor (16 seconds) Testing integration/aof [ok]: Unfinished MULTI: Server should start if load-truncated is yes (1 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (1 ms) [ok]: Append a new command after loading an incomplete AOF (0 ms) [ok]: Replication of an expired key does not delete the expired key (514 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (382 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: BLMOVE (right, left) replication, list exists (1003 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (1 ms) [ok]: Bad format: Server should have logged an error (1 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Unfinished MULTI: Server should have logged an error (1 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (6 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (7 ms) [ok]: Short read: Utility should be able to fix the AOF (7 ms) [ok]: Fixed AOF: Server should have been started (0 ms) [ok]: Shutting down master waits for replica timeout (2205 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (616 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (39 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (2547 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [ok]: Redis should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: BLMOVE (right, right) replication, list exists (1003 ms) [ok]: BLPOP followed by role change, issue #2473 (104 ms) [ok]: Detect write load to master (1002 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (468 ms) [ok]: Second server should have role master at first (0 ms) [ok]: SLAVEOF should start with link status "down" (0 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (0 ms) [ok]: SET on the master should immediately propagate (1 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (1016 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: FLUSHDB / FLUSHALL should replicate (96 ms) [ok]: ROLE in master reports master with a slave (0 ms) [ok]: ROLE in slave reports slave in connected state (1 ms) [ok]: Shutting down master waits for replica then fails (1250 ms) [ok]: Shutting down master waits for replica then aborted (525 ms) [21/91 done]: integration/shutdown (9 seconds) Testing integration/aof-race [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (2 ms) [22/91 done]: integration/aof-race (0 seconds) Testing integration/aof-multi-part [ok]: Multi Part AOF can't load data when some file missing (110 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (110 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (109 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (110 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (110 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (111 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (110 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (111 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (113 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (113 ms) [ok]: Multi Part AOF can start when no aof and no manifest (125 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (124 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (125 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3128 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (125 ms) [ok]: MIGRATE can correctly transfer large values (11482 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (13822 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (124 ms) [ok]: ZSCORE - skiplist (31 ms) [ok]: ZMSCORE - skiplist (31 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (33 ms) [23/91 done]: integration/replication-2 (17 seconds) Testing integration/rdb [ok]: Slave is able to evict keys created in writable slaves (6003 ms) [ok]: ZSET sorting stresser - skiplist (44 ms) [ok]: MIGRATE can correctly transfer hashes (218 ms) [ok]: test old version rdb file (0 ms) [ok]: Writable replica doesn't return expired keys (103 ms) [ok]: PFCOUNT updates cache on readonly replica (2 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble no) (221 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (2 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (103 ms) [ok]: RDB encoding loading test (9 ms) [ok]: Multi Part AOF can load data from old version redis (rdb preamble yes) (223 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (126 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (128 ms) [ok]: XRANGE fuzzing (16162 ms) [ok]: XREVRANGE regression test for issue #5006 (2 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (1 ms) [ok]: SRANDMEMBER with a dict containing long chain (19887 ms) [ok]: SMOVE basics - from regular set to intset (4 ms) [ok]: SMOVE basics - from intset to regular set (2 ms) [ok]: SMOVE non existing key (2 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (2 ms) [ok]: SMOVE from intset to non existing destination set (1 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: SMOVE with identical source and destination (1 ms) [ok]: SMOVE only notify dstset when the addition is successful (2 ms) [ok]: MIGRATE timeout actually works (634 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (118 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: XTRIM with MAXLEN option basic test (108 ms) [ok]: XADD with LIMIT consecutive calls (12 ms) [ok]: XTRIM with ~ is limited (12 ms) [ok]: XTRIM without ~ is not limited (12 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1127 ms) [24/91 done]: integration/replication-buffer (13 seconds) Testing integration/corrupt-dump [ok]: XTRIM without ~ and with LIMIT (11 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: MIGRATE can migrate multiple keys at once (221 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (14 ms) [ok]: corrupt payload: #7445 - with sanitize (218 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis1) (104 ms) [ok]: Test RDB stream encoding (119 ms) [25/91 done]: integration/replication-3 (17 seconds) Testing integration/corrupt-dump-fuzzer [ok]: Test RDB stream encoding - sanitize dump (11 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (219 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (redis2) (105 ms) [ok]: XADD with MINID > lastid can propagate correctly (16 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (220 ms) [ok]: Server should not start if RDB file can't be open (1 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (219 ms) [ok]: Multi Part AOF can upgrade when when two redis share the same server dir (626 ms) [ok]: Server should not start if RDB is corrupted (1 ms) [ok]: corrupt payload: invalid zlbytes header (224 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (22 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (224 ms) [ok]: AOF fsync always barrier issue (5235 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (331 ms) [ok]: corrupt payload: valid zipped hash header, dup records (225 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (18 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (225 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redis starts from empty (131 ms) [26/91 done]: unit/dump (30 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: GETEX should not append to AOF (2 ms) [ok]: corrupt payload: quicklist big ziplist prev len (225 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redis starts from empty (133 ms) [ok]: XADD with ~ MINID can propagate correctly (25 ms) [ok]: RDB load zipmap hash: converts to listpack (0 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: Unknown command: Server should have logged an error (1 ms) [ok]: corrupt payload: quicklist small ziplist prev len (225 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (23 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: Test FLUSHALL aborts bgsave (762 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (103 ms) [ok]: corrupt payload: quicklist ziplist wrong count (227 ms) [ok]: bgsave resets the change counter (103 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (20 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (1 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (0 ms) [ok]: AOF enable will create manifest file (498 ms) [27/91 done]: integration/convert-zipmap-hash-on-load (1 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: corrupt payload: #3080 - quicklist (223 ms) [ok]: XADD can CREATE an empty stream (2 ms) [ok]: XSETID can set a specific ID (1 ms) [ok]: XSETID cannot SETID with smaller ID (1 ms) [ok]: XSETID cannot SETID on non-existent key (0 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (2 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (0 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (103 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: corrupt payload: quicklist with empty ziplist (225 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (2 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (5 ms) [ok]: Maximum XDEL ID behaves correctly (3 ms) [ok]: XADD with artial ID with maximal seq (1 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (2 ms) [28/91 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: corrupt payload: quicklist encoded_len is 0 (223 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: Generate timestamp annotations in AOF (339 ms) [ok]: Empty stream can be rewrite into AOF correctly (108 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (243 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (111 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: intsets implementation stress testing (2709 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (1 ms) [29/91 done]: unit/type/set (32 seconds) Testing integration/logging [30/91 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: corrupt payload: #3080 - ziplist (232 ms) [ok]: XGROUP HELP should not have unexpected options (1 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (3537 ms) [31/91 done]: unit/type/stream (32 seconds) Testing integration/psync2-reg [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (125 ms) [ok]: Crash report generated on SIGABRT (6 ms) [ok]: Truncate AOF to specific timestamp (496 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (235 ms) [ok]: Crash report generated on DEBUG SEGFAULT (5 ms) [32/91 done]: integration/logging (0 seconds) Testing integration/psync2-pingoff [ok]: Stress tester for #3343-alike bugs comp: 0 (10671 ms) [ok]: client freed during loading (1598 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1510 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (241 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (734 ms) [ok]: corrupt payload: listpack invalid size header (236 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (8093 ms) [ok]: corrupt payload: listpack too long entry len (134 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (545 ms) [ok]: corrupt payload: listpack very long entry len (134 ms) [ok]: AOF enable/disable auto gc (211 ms) [ok]: corrupt payload: listpack too long entry prev len (235 ms) [ok]: AOF can produce consecutive sequence number after reload (95 ms) [ok]: Slave should be able to synchronize with the master (103 ms) [ok]: Test RDB load info (856 ms) [ok]: PSYNC2 #3899 regression: setup (1006 ms) [ok]: corrupt payload: stream with duplicate consumers (236 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (1 ms) [ok]: PSYNC2 pingoff: setup (1005 ms) [ok]: PSYNC2 pingoff: write and wait replication (2 ms) [ok]: script won't load anymore if it's in rdb (1 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (948 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (354 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (65 ms) [ok]: corrupt payload: hash ziplist with duplicate records (237 ms) [ok]: LTRIM stress testing - listpack (14324 ms) [ok]: Test replication with blocking lists and sorted sets operations (25007 ms) [33/91 done]: unit/type/list-2 (34 seconds) Testing integration/psync2-master-restart [ok]: corrupt payload: hash listpack with duplicate records (240 ms) [34/91 done]: integration/block-repl (27 seconds) Testing integration/failover [ok]: corrupt payload: hash listpack with duplicate records - convert (138 ms) [ok]: AOF will trigger limit when AOFRW fails many times (572 ms) [ok]: failed bgsave prevents writes (447 ms) [35/91 done]: integration/rdb (6 seconds) Testing integration/valkey-cli [ok]: Detect write load to master (1002 ms) [ok]: corrupt payload: hash ziplist uneven record count (237 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: setup replication for following tests (103 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (1 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (1 ms) [ok]: Interactive CLI: INFO response should be printed raw (63 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (1 ms) [ok]: Interactive CLI: Status reply (61 ms) [ok]: corrupt payload: hash duplicate records (237 ms) [ok]: Interactive CLI: Integer reply (61 ms) [ok]: Interactive CLI: Bulk reply (67 ms) [ok]: Interactive CLI: Multi-bulk reply (63 ms) [ok]: corrupt payload: hash empty zipmap (241 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (141 ms) [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (141 ms) [ok]: Interactive CLI: Parsing quotes (427 ms) [ok]: failover command to specific replica works (830 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (247 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (1134 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (237 ms) [ok]: Interactive CLI: Subscribed mode (608 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (241 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: corrupt payload: fuzzer findings - hash crash (231 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (2377 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (3 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (3 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (3 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (4 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (416 ms) [ok]: Non-interactive TTY CLI: Status reply (3 ms) [ok]: Non-interactive TTY CLI: Integer reply (3 ms) [ok]: Non-interactive TTY CLI: Bulk reply (3 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (4 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (8 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (7 ms) [ok]: failover command to any replica works (914 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (26 ms) [ok]: Non-interactive non-TTY CLI: Status reply (3 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (3 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (3 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (4 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (234 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (56 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (2 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (5 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (5 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (7 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (5 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (22 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (7 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (27 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (238 ms) [ok]: PSYNC2: cluster is consistent after failover (2 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2293 ms) [ok]: failover to a replica with force works (510 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (239 ms) [36/91 done]: integration/aof-multi-part (11 seconds) Testing integration/valkey-benchmark [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - empty intset (234 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1005 ms) [ok]: BZPOPMIN with same key multiple times should work (4 ms) [ok]: benchmark: set,get (11 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (3 ms) [ok]: BZPOPMIN with variadic ZADD (2 ms) [ok]: benchmark: connecting using URI set,get (10 ms) [ok]: benchmark: connecting using URI with authentication set,get (9 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (236 ms) [ok]: benchmark: full test suite (179 ms) [ok]: failover with timeout aborts if replica never catches up (628 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (237 ms) [ok]: failovers can be aborted (97 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (230 ms) [ok]: benchmark: multi-thread set,get (510 ms) [ok]: failover aborts if target rejects sync request (366 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (228 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: benchmark: pipelined full set,get (273 ms) [ok]: benchmark: arbitrary command (11 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1003 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: benchmark: keyspace length (36 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (3 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (223 ms) [37/91 done]: integration/valkey-benchmark (1 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - stream bad lp_count (219 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (127 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5002 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1131 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (221 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9305 ms) [ok]: corrupt payload: fuzzer findings - infinite loop (125 ms) [38/91 done]: integration/failover (5 seconds) Testing unit/pubsub [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (1 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (2 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (220 ms) [ok]: PubSub messages with CLIENT REPLY OFF (99 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (1 ms) [ok]: NUMPATs returns the number of unique patterns (1 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (1 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1002 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: BZPOP/BZMPOP against wrong type (2 ms) [ok]: BZMPOP with illegal argument (3 ms) [ok]: BZMPOP with multiple blocked clients (5 ms) [ok]: Keyspace notifications: we receive keyspace notifications (45 ms) [ok]: Keyspace notifications: we receive keyevent notifications (61 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (1 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (2 ms) [ok]: Keyspace notifications: set events test (2 ms) [ok]: Keyspace notifications: zset events test (1 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Keyspace notifications: stream events test (3 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (224 ms) [ok]: BZMPOP propagate as pop with count command to replica (179 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (3 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (128 ms) [ok]: Keyspace notifications: expired events (triggered expire) (202 ms) [ok]: Make the old master a replica of the new one and check conditions (1005 ms) [ok]: Keyspace notifications: expired events (background expire) (162 ms) [ok]: Keyspace notifications: evicted events (2 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (2 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (1 ms) [ok]: publish to self inside script (2 ms) [ok]: unsubscribe inside multi, and publish to self (2 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (221 ms) [39/91 done]: unit/pubsub (0 seconds) Testing unit/pubsubshard [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: dismiss all data types memory (1423 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (2 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (2 ms) [ok]: corrupt payload: fuzzer findings - valgrind invalid read (225 ms) [ok]: PubSubShard with CLIENT REPLY OFF (103 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (235 ms) [ok]: Dumping an RDB - functions only: no (3748 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (129 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (1670 ms) [ok]: setup replication for following tests (102 ms) [ok]: publish message to master and receive on replica (2 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (228 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (8331 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (223 ms) [ok]: EVAL can process writes from AOF in read-only replicas (235 ms) [ok]: Test valkey-check-aof for old style resp AOF (9 ms) [ok]: Test valkey-check-aof for old style resp AOF - has data in the same format as manifest (8 ms) [ok]: Test valkey-check-aof for old style rdb-preamble AOF (9 ms) [ok]: ZSET skiplist order consistency when elements are moved (1497 ms) [ok]: ZRANGESTORE basic (2 ms) [ok]: ZRANGESTORE RESP3 (2 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (1 ms) [ok]: Test valkey-check-aof for Multi Part AOF with resp AOF base (10 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (1 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (0 ms) [ok]: ZRANGESTORE - empty range (1 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (1 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (2 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: Test valkey-check-aof for Multi Part AOF with rdb-preamble AOF base (10 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: Test valkey-check-aof for Multi Part AOF contains a format error (7 ms) [ok]: ZRANDMEMBER - listpack (17 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in fix mode (16 ms) [ok]: Test valkey-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (11 ms) [ok]: ZRANDMEMBER - skiplist (15 ms) [ok]: ZRANDMEMBER with RESP3 (2 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: corrupt payload: fuzzer findings - huge string (224 ms) [ok]: Dumping an RDB - functions only: yes (793 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (7 ms) [40/91 done]: integration/aof (18 seconds) Testing unit/slowlog [ok]: Scan mode (155 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (223 ms) [41/91 done]: unit/pubsubshard (2 seconds) Testing unit/scripting [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (127 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: ZRANDMEMBER with - skiplist (530 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (200 ms) [ok]: SLOWLOG - max entries is correctly handled (12 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (4 ms) [ok]: SLOWLOG - RESET subcommand works (1 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (223 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (226 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (3 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: PSYNC2: cluster is consistent after load (x = 27189) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (127 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (3 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (3 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (9 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (2 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (220 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: ZRANDMEMBER with - listpack (551 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (24 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (10 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (2 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (2 ms) [42/91 done]: unit/type/zset (42 seconds) Testing unit/functions [ok]: SLOWLOG - can clean older entries (201 ms) [ok]: corrupt payload: fuzzer findings - empty quicklist (220 ms) [ok]: FUNCTION - Basic usage (0 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (1 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: FUNCTION - test function delete (1 ms) [ok]: FUNCTION - test fcall bad arguments (0 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: FUNCTION - test fcall negative number of keys (1 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: FUNCTION - test loading from rdb (2 ms) [ok]: FUNCTION - test debug reload different options (2 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (2 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (2 ms) [ok]: FUNCTION - test function dump and restore with replace argument (2 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (1 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (0 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1951 ms) [ok]: corrupt payload: fuzzer findings - empty zset (223 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: SLOWLOG - can be disabled (402 ms) [ok]: SLOWLOG - count must be >= -1 (1 ms) [43/91 done]: integration/psync2-master-restart (8 seconds) Testing unit/maxmemory [ok]: SLOWLOG - get all slow logs (3 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (4 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (219 ms) [44/91 done]: unit/slowlog (1 seconds) Testing unit/introspection [ok]: FUNCTION - test function kill (406 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (83 ms) [ok]: PING (0 ms) [ok]: CLIENT LIST (1 ms) [ok]: CLIENT LIST with IDs (0 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (2 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (4 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (225 ms) [ok]: CLIENT KILL close the client connection during bgsave (89 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (2425 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (48 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (60 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (50 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (3 ms) [ok]: MONITOR correctly handles multi-exec cases (2 ms) [ok]: MONITOR log blocked command only once (3 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (1 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (223 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (1 ms) [ok]: After CLIENT SETNAME, connection can still be closed (1 ms) [ok]: CLIENT SETINFO can set a library name to this connection (0 ms) [ok]: CLIENT SETINFO invalid args (1 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: FUNCTION - test script kill not working on function (408 ms) [ok]: corrupt payload: fuzzer findings - LCS OOM (225 ms) [ok]: Connecting as a replica (2126 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (130 ms) [ok]: FUNCTION - test function kill not working on eval (406 ms) [ok]: FUNCTION - test function flush (3 ms) [ok]: FUNCTION - test function wrong argument (1 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (751 ms) [ok]: corrupt payload: fuzzer findings - lpFind invalid access (124 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (219 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: FUNCTION - creation is replicated to replica (1 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9482 ms) [ok]: FUNCTION - restore is replicated to replica (2 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: CONFIG save params special case handled properly (893 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (219 ms) [ok]: CONFIG sanity (31 ms) [ok]: Disconnecting the replica from master instance (102 ms) [ok]: FUNCTION - test replication to replica on rdb phase (0 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (1 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (0 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (17937 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (220 ms) [ok]: CONFIG REWRITE sanity (253 ms) [ok]: EVAL does not leak in the Lua stack (2720 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (3 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (1 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (3 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (224 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (225 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: Script return recursive object (311 ms) [ok]: Script check unpack with massive arguments (42 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (224 ms) [45/91 done]: integration/corrupt-dump (16 seconds) Testing unit/introspection-2 [ok]: eviction due to output buffers of pubsub, client eviction: false (1378 ms) [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (757 ms) [ok]: CONFIG SET with multiple args (1 ms) [ok]: CONFIG SET rollback on set error (1 ms) [ok]: CONFIG SET rollback on apply error (5 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (1 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (100 ms) [ok]: CONFIG GET hidden configs (13 ms) [ok]: CONFIG GET multiple args (2 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (331 ms) [ok]: valkey-server command line arguments - error cases (91 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (0 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (1 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (1 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (1 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (0 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (1 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (1 ms) [ok]: valkey-server command line arguments - allow passing option name and option value in the same arg (228 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (405 ms) [ok]: Detect write load to master (1001 ms) [ok]: dismiss client output buffer (5632 ms) [ok]: valkey-server command line arguments - wrong usage that we support anyway (225 ms) [ok]: LIBRARIES - load timeout (501 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (4 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (307 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (1 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (2 ms) [ok]: PSYNC2: cluster is consistent after failover (2 ms) [ok]: FUNCTION - verify allow-omm allows running any command (1 ms) [ok]: dismiss client query buffer (204 ms) [ok]: valkey-server command line arguments - allow option value to use the `--` prefix (226 ms) [ok]: Piping raw protocol (2459 ms) [ok]: Options -X with illegal argument (6 ms) [ok]: DUMP RESTORE with -x option (9 ms) [ok]: DUMP RESTORE with -X option (10 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [46/91 done]: integration/valkey-cli (12 seconds) Testing unit/limits [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (1 ms) [ok]: FUNCTION - write script on fcall_ro (1 ms) [ok]: FUNCTION - write script with no-writes flag (0 ms) [ok]: FUNCTION - deny oom (1 ms) [ok]: FUNCTION - deny oom on no-writes function (1 ms) [ok]: FUNCTION - allow stale (3 ms) [ok]: FUNCTION - redis version api (1 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (3 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (1 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (1 ms) [ok]: FUNCTION - test getmetatable on script load (0 ms) [ok]: Timedout script does not cause a false dead client (299 ms) [ok]: valkey-server command line arguments - option name and option value in the same arg and `--` prefix (229 ms) [47/91 done]: unit/functions (4 seconds) Testing unit/obuf-limits [ok]: CONFIG SET client-output-buffer-limit (4 ms) [ok]: ziplist implementation: value encoding and backlink (13930 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (1442 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Timedout script link is still usable after Lua returns (524 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Check if maxclients works refusing connections (909 ms) [48/91 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: valkey-server command line arguments - save with empty input (1145 ms) [ok]: BITCOUNT returns 0 against non existing key (0 ms) [ok]: BITCOUNT returns 0 with out of range indexes (1 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (1 ms) [ok]: BITCOUNT against test vector #1 (1 ms) [ok]: BITCOUNT against test vector #2 (0 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (1 ms) [ok]: dismiss replication backlog (1436 ms) [49/91 done]: integration/dismiss-mem (9 seconds) Testing unit/bitfield [ok]: Chained replicas disconnect when replica re-connect with the same master (2923 ms) [ok]: AOF rewrite during write load: RDB preamble=no (29040 ms) [ok]: valkey-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (229 ms) [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (1 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (1 ms) [ok]: BITFIELD chaining of multiple commands (1 ms) [ok]: BITFIELD unsigned overflow wrap (1 ms) [ok]: BITFIELD unsigned overflow sat (2 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (2 ms) [ok]: Timedout scripts and unblocked command (937 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: Turning off AOF kills the background writing child if any (107 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (206 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (4 ms) [ok]: AOF rewrite of list with listpack encoding, string data (106 ms) [ok]: cannot modify protected configuration - local (9 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (1422 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: BITFIELD overflow detection fuzzing (573 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3004 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (239 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: Lua scripts using SELECT are replicated correctly (2 ms) [ok]: Without maxmemory small integers are shared (0 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: AOF rewrite of list with listpack encoding, int data (56 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (224 ms) [50/91 done]: integration/psync2-pingoff (16 seconds) Testing unit/geo [ok]: AOF rewrite of set with intset encoding, string data (106 ms) [ok]: GEO with wrong type src key (3 ms) [ok]: GEO with non existing src key (1 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (2 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (1 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (1 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (1 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (1 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (1 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (1 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (1 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (1 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (1 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (1 ms) [ok]: GEOPOS simple (1 ms) [ok]: GEOPOS missing element (1 ms) [ok]: GEOPOS with only key as argument (1 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (1 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (1 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (2 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: plain usage (0 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (2 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (1 ms) [ok]: BITCOUNT fuzzing without start/end (1367 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (509 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (311 ms) [ok]: BITFIELD overflow wrap fuzzing (746 ms) [ok]: BITFIELD regression for #3221 (1 ms) [ok]: BITFIELD regression for #3564 (4 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (1 ms) [ok]: AOF rewrite of set with intset encoding, int data (106 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9993 ms) [51/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/memefficiency [ok]: AOF rewrite of set with hashtable encoding, int data (284 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (3 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: BITFIELD: setup slave (101 ms) [ok]: BITFIELD: write on master, read on slave (3 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (1 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (107 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: config during loading (1314 ms) [52/91 done]: unit/bitfield (2 seconds) Testing unit/hyperloglog [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (953 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (326 ms) [ok]: CONFIG REWRITE handles rename-command properly (348 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (106 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (314 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (59 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (1 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (1 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (11 ms) [ok]: Script block the time in some expiration related commands (83 ms) [ok]: RESTORE expired keys with expiration time (12 ms) [ok]: CONFIG REWRITE handles alias config properly (704 ms) [53/91 done]: unit/introspection (8 seconds) Testing unit/lazyfree [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (314 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (853 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms) [ok]: EVAL - Return _G (1 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (1 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (106 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (3 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (1 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: BITCOUNT fuzzing with start/end (1935 ms) [ok]: BITCOUNT with start, end (3 ms) [ok]: BITCOUNT syntax error #1 (0 ms) [ok]: BITCOUNT syntax error #2 (1 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (1 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (1 ms) [ok]: BITOP where dest and target are the same key (1 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (2 ms) [ok]: Memory efficiency with values in range 32 (1541 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 53517) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #3 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (1 ms) [ok]: HyperLogLog self test passes (1266 ms) [ok]: PFADD without arguments creates an HLL value (0 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (313 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (331 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (4 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: AOF rewrite functions (105 ms) [ok]: UNLINK can reclaim memory in background (536 ms) [ok]: TOUCH alters the last access time of a key (3003 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (220 ms) [ok]: BGREWRITEAOF is refused if already in progress (14 ms) [54/91 done]: unit/aofrw (48 seconds) Testing unit/wait [ok]: BITOP and fuzzing (731 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (945 ms) [ok]: Setup slave (102 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (754 ms) [ok]: HyperLogLogs are promote from sparse to dense (973 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (1 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (89 ms) [ok]: Memory efficiency with values in range 64 (1211 ms) [ok]: lazy free a stream with all types of metadata (181 ms) [ok]: lazy free a stream with deleted cgroup (2 ms) [ok]: BITOP or fuzzing (684 ms) [55/91 done]: unit/lazyfree (2 seconds) Testing unit/pause [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (788 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (344 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (101 ms) [ok]: Test write commands are paused by RO (1 ms) [ok]: Test special commands are paused by RO (2 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (2 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (1 ms) [ok]: Test RO scripts are not blocked by pause RO (2 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (2 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (3 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: Test multiple clients can be queued up and unblocked (2 ms) [ok]: Test clients with syntax errors will get responses immediately (1 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1073 ms) [ok]: Test both active and passive expires are skipped during client pause (103 ms) [ok]: Test that client pause starts at the end of a transaction (2 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: BITOP xor fuzzing (938 ms) [ok]: Test when replica paused, offset would not grow (5 ms) [ok]: Test replica offset would grow after unpause (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (804 ms) [ok]: BITOP NOT fuzzing (67 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (1 ms) [ok]: BITOP with empty string after non empty string (issue #529) (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (1 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (7 ms) [ok]: BITPOS bit=0 works with intervals (2 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (1 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (4 ms) [56/91 done]: unit/pause (1 seconds) Testing unit/querybuf [ok]: Memory efficiency with values in range 128 (1376 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: EVAL does not leak in the Lua stack (2536 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (2 ms) [ok]: HyperLogLog sparse encoding stress test (1572 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (1 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (1 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (0 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (430 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1103 ms) [ok]: Script return recursive object (287 ms) [ok]: Script check unpack with massive arguments (28 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: PSYNC2 #3899 regression: verify consistency (42 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (826 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (382 ms) [ok]: TOUCH alters the last access time of a key in no-touch mode (3004 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (390 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (405 ms) [57/91 done]: unit/bitops (7 seconds) Testing unit/tls [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (219 ms) [58/91 done]: unit/tls (0 seconds) Testing unit/tracking [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (1 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (1 ms) [ok]: Clients can enable the BCAST mode with prefixes (1 ms) [ok]: Adding prefixes to BCAST mode works (1 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [59/91 done]: integration/psync2-reg (22 seconds) Testing unit/oom-score-adj [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (866 ms) [ok]: Timedout script does not cause a false dead client (188 ms) [ok]: Memory efficiency with values in range 1024 (1453 ms) [ok]: CONFIG SET oom-score-adj works as expected (14 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (2 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (1 ms) [ok]: CONFIG SET oom score relative and absolute (0 ms) [ok]: CONFIG SET out-of-range oom score (1 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (11 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9356 ms) [60/91 done]: unit/oom-score-adj (0 seconds) Testing unit/shutdown [ok]: Timedout script link is still usable after Lua returns (306 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (117 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1101 ms) [ok]: TOUCH returns the number of existing keys specified (0 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (1 ms) [ok]: command stats for EXPIRE (2 ms) [ok]: command stats for BRPOP (2 ms) [ok]: command stats for MULTI (3 ms) [ok]: command stats for scripts (2 ms) [ok]: COMMAND COUNT get total number of Redis commands (0 ms) [ok]: COMMAND GETKEYS GET (1 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (9 ms) [ok]: COMMAND LIST syntax error (1 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (10 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (2 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (1 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (1 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: WAITAOF local copy before fsync (95 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (1 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (3 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (1 ms) [ok]: RENAME command will not be marked with movablekeys (1 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (1 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (2 ms) [ok]: XREAD command is marked with movablekeys (1 ms) [ok]: EVAL command is marked with movablekeys (2 ms) [ok]: SORT command is marked with movablekeys (2 ms) [ok]: SORT_RO command is marked with movablekeys (2 ms) [ok]: MIGRATE command is marked with movablekeys (2 ms) [ok]: GEORADIUS command is marked with movablekeys (3 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (13 ms) [61/91 done]: unit/introspection-2 (10 seconds) Testing unit/networking [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Temp rdb will be deleted in signal handle (86 ms) [ok]: RDB save will be failed in shutdown (3 ms) [ok]: CONFIG SET port number (221 ms) [ok]: Timedout scripts and unblocked command (526 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (101 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (1 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: Tracking gets notification of expired keys (1002 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (992 ms) [ok]: CONFIG SET bind address (220 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (6 ms) [ok]: Tracking gets notification of lazy expired keys (102 ms) [ok]: HELLO 3 reply is correct (1 ms) [ok]: HELLO without protover (3 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (2 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (2 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (3 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (2 ms) [ok]: Different clients can redirect to the same connection (2 ms) [ok]: Different clients using different protocols can track the same key (2 ms) [ok]: No invalidation message when using OPTIN option (2 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms) [ok]: Able to redirect to a RESP3 client (2 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (2 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (95 ms) [ok]: BCAST with prefix collisions throw errors (2 ms) [ok]: hdel deliver invalidate message after response in the same connection (2 ms) [62/91 done]: unit/shutdown (1 seconds) Testing unit/client-eviction [ok]: Tracking invalidation message is not interleaved with multiple keys response (113 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: Tracking invalidation message of eviction keys should be before response (6 ms) [ok]: Unblocked BLMOVE gets notification after response (2 ms) [ok]: query buffer resized correctly (2657 ms) [ok]: Tracking gets notification on tracking table key eviction (46 ms) [ok]: Invalidation message received for flushall (4 ms) [ok]: Invalidation message received for flushdb (3 ms) [ok]: Test ASYNC flushall (4 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (3 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: query buffer resized correctly when not idle (76 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: Lua scripts using SELECT are replicated correctly (2 ms) [ok]: WAITAOF local copy everysec (902 ms) [ok]: WAITAOF local copy with appendfsync always (1 ms) [ok]: WAITAOF local wait and then stop aof (2 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: client evicted due to large argv (133 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (210 ms) [ok]: Tracking info is correct (7 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (2 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (2 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (4 ms) [ok]: Regression test for #11715 (4 ms) [ok]: RESP3 based basic invalidation with client reply off (3 ms) [ok]: client evicted due to large query buf (81 ms) [ok]: CONFIG SET bind-source-addr (524 ms) [ok]: client evicted due to percentage of maxmemory (27 ms) [ok]: RESP2 based basic invalidation with client reply off (51 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (4 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (3 ms) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (38 ms) [ok]: WAITAOF local if AOFRW was postponed (302 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [ok]: Default bind address configuration handling (216 ms) [ok]: Protected mode works as expected (5 ms) [63/91 done]: unit/tracking (2 seconds) Testing unit/violations [ok]: client evicted due to large multi buf (357 ms) [ok]: WAITAOF replica copy before fsync (76 ms) [64/91 done]: unit/networking (1 seconds) Testing unit/replybufsize [ok]: SORT adds integer field to list (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (1118 ms) [65/91 done]: unit/violations (0 seconds) Testing unit/cluster/announced-endpoints [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: client evicted due to watched key list (401 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain Redis commands from Lua (3 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: WAITAOF replica copy everysec (819 ms) [ok]: verify reply buffer limits (661 ms) [66/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/misc [ok]: Memory efficiency with values in range 16384 (2975 ms) [67/91 done]: unit/memefficiency (8 seconds) Testing unit/cluster/cli [ok]: Detect write load to master (1001 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (1170 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (1 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (1 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (1 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1005 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (1 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (2 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: query buffer resized correctly with fat argv (2919 ms) [68/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/scripting [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (13943 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (428 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (2 ms) [ok]: redis.sha1hex() implementation (1 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (2 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (1204 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (103 ms) [ok]: Test change cluster-announce-bus-port at runtime (203 ms) [ok]: client evicted due to pubsub subscriptions (2545 ms) [ok]: client evicted due to tracking redirection (101 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 80386) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [69/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/hostnames [ok]: Key lazy expires during key migration (14 ms) [ok]: Coverage: Basic cluster commands (5 ms) [ok]: Create 3 node cluster (1942 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Perform a Resharding (8 ms) [ok]: Verify command got unblocked after resharding (14 ms) [ok]: Wait for cluster to be stable (11 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (968 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (4 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2017 ms) [ok]: EVAL does not leak in the Lua stack (1593 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (4 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (3 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (106 ms) [ok]: WAITAOF replica copy appendfsync always (2 ms) [ok]: Replication: commands with many arguments (issue #1221) (36438 ms) [ok]: spopwithcount rewrite srem command (212 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (2 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (1 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (0 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (927 ms) [ok]: Script return recursive object (490 ms) [70/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/human-announced-nodename [ok]: Script check unpack with massive arguments (52 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: Kill a cluster node and wait for fail state (1378 ms) [ok]: WAITAOF replica copy if replica is blocked (964 ms) [ok]: Verify command got unblocked after cluster failure (62 ms) [ok]: Client output buffer hard limit is enforced (15421 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (405 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (863 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (326 ms) [ok]: Timedout script does not cause a false dead client (410 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1002 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (933 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (1 ms) [ok]: Set cluster hostnames and verify they are propagated (216 ms) [ok]: Timedout script link is still usable after Lua returns (557 ms) [ok]: Update hostnames and make sure they are all eventually propagated (220 ms) [ok]: WAITAOF on promoted replica (600 ms) [ok]: Client blocked on XREADGROUP while stream's slot is migrated (5 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (113 ms) [71/91 done]: unit/cluster/misc (6 seconds) Testing unit/cluster/multi-slot-operations [ok]: Replication of SPOP command -- alsoPropagate() API (2572 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (216 ms) [ok]: Set cluster human announced nodename and let it propagate (108 ms) [ok]: Timedout scripts and unblocked command (737 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: Data divergence can happen under default conditions (3 ms) [ok]: Data divergence is allowed on writable replicas (2 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (206 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (5 ms) [72/91 done]: integration/replication-4 (50 seconds) Testing unit/cluster/slot-ownership [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6303 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: WAITAOF master that loses a replica and backlog is dropped (2003 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redis commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: Functions are added to new node on valkey-cli cluster add-node (3091 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (403 ms) [ok]: Detect write load to master (1002 ms) [ok]: Continuous slots distribution (16 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (1 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (8 ms) [ok]: ziplist implementation: encoding stress testing (19661 ms) [73/91 done]: unit/type/list-3 (66 seconds) Testing unit/cluster/links [74/91 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (1 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (11 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: client evicted due to client tracking prefixes (6884 ms) [ok]: client evicted due to output buf (10 ms) [ok]: WAITAOF master isn't configured to do AOF (1001 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (211 ms) [ok]: WAITAOF replica isn't configured to do AOF (104 ms) [ok]: Script - disallow write on OOM (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redis (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (1 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: client no-evict on (127 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts can't run XREAD and XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: client no-evict off (107 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (5317 ms) [ok]: Human nodenames are visible in log messages (3531 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (349 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (1 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (25 ms) [ok]: SCRIPTING FLUSH ASYNC (18 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (0 ms) [ok]: SORT BY output gets ordered for scripting (2 ms) [ok]: SORT BY with GET gets ordered for scripting (1 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: avoid client eviction when client is freed by output buffer limit (236 ms) [76/91 done]: unit/cluster/human-announced-nodename (6 seconds) [77/91 done]: unit/cluster/slot-ownership (3 seconds) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (4026 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (901 ms) [ok]: Test restart will keep hostname information (224 ms) [ok]: Test hostname validation (1 ms) [ok]: decrease maxmemory-clients causes client eviction (638 ms) [78/91 done]: unit/cluster/hostnames (9 seconds) [ok]: evict clients only until below limit (351 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (107 ms) [ok]: EVAL does not leak in the Lua stack (1512 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (38 ms) [ok]: MGET: mget shouldn't be propagated in Lua (99 ms) [ok]: WAITAOF master sends PING after last write (1202 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 111486) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: evict clients in right order (large to small) (280 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (332 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (3 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (3 ms) [ok]: client total memory grows during client no-evict (138 ms) [ok]: client total memory grows during maxmemory-clients disabled (138 ms) [79/91 done]: unit/client-eviction (14 seconds) [ok]: Script return recursive object (421 ms) [ok]: Migrate the last slot away from a node using valkey-cli (3845 ms) [ok]: Script check unpack with massive arguments (65 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (2 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redis table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (1 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (1 ms) [ok]: Test print are not available (0 ms) [ok]: WAITAOF master client didn't send any write command (1203 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (404 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (261 ms) [ok]: Timedout script does not cause a false dead client (258 ms) [ok]: Each node has two links with each peer (12 ms) [ok]: Validate cluster links format (2 ms) [ok]: WAITAOF master client didn't send any command (1202 ms) [ok]: Timedout script link is still usable after Lua returns (427 ms) [ok]: Verify that single primary marks replica as failed (3249 ms) [ok]: Timedout scripts and unblocked command (731 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (206 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (5 ms) [ok]: valkey-cli --cluster create with cluster-port (1938 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: Connect a replica to the master instance (101 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (6034 ms) [ok]: No response for single command if client output buffer hard limit is enforced (118 ms) [ok]: valkey-cli --cluster add-node with cluster-port (1192 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (13935 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (0 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (7986 ms) [ok]: Test selective replication of certain Redis commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [80/91 done]: unit/cluster/cli (16 seconds) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 142686) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (2 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (217 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1055 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (27 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (47 ms) [81/91 done]: integration/psync2 (42 seconds) [ok]: Obuf limit, KEYS stopped mid-run (156 ms) [82/91 done]: unit/obuf-limits (28 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3336 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (1 ms) { ping} { "+PONG"} [ok]: Test scripting debug lua server invocations (1 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (1 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (11 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: Detect write load to master (1001 ms) [ok]: Shebang support for lua engine (1 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (1 ms) [ok]: allow-oom shebang flag (2 ms) [ok]: no-writes shebang flag (0 ms) [ok]: no-writes shebang flag on replica (106 ms) [ok]: not enough good replicas (1 ms) [ok]: not enough good replicas state change during long script (929 ms) [ok]: allow-stale shebang flag (3 ms) [ok]: reject script do not cause a Lua stack leak (12 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2337 ms) [ok]: Consistent eval error reporting (18 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (1 ms) [ok]: LUA redis.status_reply API (1 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (1 ms) [83/91 done]: unit/scripting (36 seconds) [ok]: WAITAOF when replica switches between masters, fsync: always (1339 ms) [ok]: setup replication for following tests (102 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (678 ms) [84/91 done]: unit/wait (28 seconds) [ok]: Verify that multiple primaries mark replica as failed (6290 ms) [ok]: Disconnect link when send buffer limit reached (11963 ms) [ok]: Link memory increases with publishes (785 ms) [ok]: Link memory resets after publish messages flush (493 ms) [85/91 done]: unit/cluster/links (18 seconds) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9720 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: Detect write load to master (1002 ms) [ok]: GEOSEARCH fuzzy test - byradius (38286 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (16591 ms) [ok]: Only primary with slots has the right to mark a node as failed (11518 ms) [86/91 done]: unit/cluster/failure-marking (27 seconds) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9487 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (39 ms) [ok]: Slave should be able to synchronize with the master (807 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6300 ms) [ok]: Slave should be able to synchronize with the master (1813 ms) [ok]: Detect write load to master (0 ms) [ok]: Fuzzing dense/sparse encoding: Redis should always detect errors (60299 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (2 ms) [ok]: PFMERGE results on the cardinality of union of sets (2 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (2 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (2 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (8095 ms) [ok]: Slave should be able to synchronize with the master (811 ms) [ok]: Detect write load to master (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (9052 ms) [ok]: GEOSEARCH fuzzy test - bybox (37719 ms) [ok]: GEOSEARCH box edges fuzzy test (112 ms) [87/91 done]: unit/geo (76 seconds) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9418 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (4517 ms) [ok]: Slave should be able to synchronize with the master (1815 ms) [ok]: Detect write load to master (0 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (1190 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [88/91 done]: unit/hyperloglog (79 seconds) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (10695 ms) [ok]: Slave should be able to synchronize with the master (1818 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (81 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6330 ms) [ok]: Slave should be able to synchronize with the master (809 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (61605 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (421 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (7824 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (419 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (859 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: Busy script during async loading (867 ms) [ok]: Blocked commands and configs during async-loading (428 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 23769 to exit... Waiting for process 23769 to exit... Waiting for process 23769 to exit... Waiting for process 23769 to exit... [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9262 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (0 ms) [ok]: slave buffer are counted correctly (109414 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (9438 ms) [89/91 done]: integration/replication-psync (164 seconds) [ok]: replica buffer don't induce eviction (12000 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (414 ms) [ok]: client tracking don't cause eviction feedback loop (1456 ms) [ok]: propagation with eviction (100 ms) [ok]: propagation with eviction in MULTI (97 ms) [ok]: lru/lfu value of the key just added (1 ms) [90/91 done]: unit/maxmemory (146 seconds) [ok]: diskless loading short read (41581 ms) [ok]: diskless no replicas drop during rdb pipe (7557 ms) [ok]: diskless slow replicas drop during rdb pipe (3474 ms) [ok]: diskless fast replicas drop during rdb pipe (5842 ms) [ok]: diskless all replicas drop during rdb pipe (1309 ms) [ok]: diskless timeout replicas drop during rdb pipe (5352 ms) [ok]: diskless replication child being killed is collected (1425 ms) [ok]: replication child dies when parent is killed - diskless: yes (1160 ms) [ok]: replication child dies when parent is killed - diskless: no (1463 ms) [ok]: diskless replication read pipe cleanup (730 ms) [ok]: replicaof right after disconnection (1830 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (927 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync (106 ms) [ok]: replica can handle EINTR if use diskless load (848 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (103 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (100 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (105 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (104 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (111 ms) [91/91 done]: integration/replication (232 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (0 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (2 seconds) Testing solo test [91/91 done]: defrag (0 seconds) The End Execution time of different units: 0 seconds - unit/printver 0 seconds - unit/info-command 0 seconds - unit/type/incr 1 seconds - unit/protocol 2 seconds - unit/keyspace 2 seconds - unit/auth 2 seconds - unit/info 1 seconds - unit/quit 5 seconds - unit/type/stream-cgroups 5 seconds - unit/multi 0 seconds - unit/acl-v2 2 seconds - unit/acl 9 seconds - unit/type/hash 11 seconds - unit/sort 12 seconds - unit/scan 12 seconds - unit/other 13 seconds - unit/expire 16 seconds - unit/type/list 17 seconds - unit/type/string 16 seconds - unit/latency-monitor 9 seconds - integration/shutdown 0 seconds - integration/aof-race 17 seconds - integration/replication-2 13 seconds - integration/replication-buffer 17 seconds - integration/replication-3 30 seconds - unit/dump 1 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/convert-ziplist-hash-on-load 32 seconds - unit/type/set 1 seconds - integration/convert-ziplist-zset-on-load 32 seconds - unit/type/stream 0 seconds - integration/logging 34 seconds - unit/type/list-2 27 seconds - integration/block-repl 6 seconds - integration/rdb 11 seconds - integration/aof-multi-part 1 seconds - integration/valkey-benchmark 5 seconds - integration/failover 0 seconds - unit/pubsub 18 seconds - integration/aof 2 seconds - unit/pubsubshard 42 seconds - unit/type/zset 8 seconds - integration/psync2-master-restart 1 seconds - unit/slowlog 16 seconds - integration/corrupt-dump 12 seconds - integration/valkey-cli 4 seconds - unit/functions 1 seconds - unit/limits 9 seconds - integration/dismiss-mem 16 seconds - integration/psync2-pingoff 20 seconds - integration/corrupt-dump-fuzzer 2 seconds - unit/bitfield 8 seconds - unit/introspection 48 seconds - unit/aofrw 2 seconds - unit/lazyfree 1 seconds - unit/pause 7 seconds - unit/bitops 0 seconds - unit/tls 22 seconds - integration/psync2-reg 0 seconds - unit/oom-score-adj 10 seconds - unit/introspection-2 1 seconds - unit/shutdown 2 seconds - unit/tracking 1 seconds - unit/networking 0 seconds - unit/violations 1 seconds - unit/replybufsize 8 seconds - unit/memefficiency 6 seconds - unit/querybuf 3 seconds - unit/cluster/announced-endpoints 2 seconds - unit/cluster/scripting 6 seconds - unit/cluster/misc 50 seconds - integration/replication-4 66 seconds - unit/type/list-3 3 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 6 seconds - unit/cluster/human-announced-nodename 3 seconds - unit/cluster/slot-ownership 9 seconds - unit/cluster/hostnames 14 seconds - unit/client-eviction 16 seconds - unit/cluster/cli 42 seconds - integration/psync2 28 seconds - unit/obuf-limits 36 seconds - unit/scripting 28 seconds - unit/wait 18 seconds - unit/cluster/links 27 seconds - unit/cluster/failure-marking 76 seconds - unit/geo 79 seconds - unit/hyperloglog 164 seconds - integration/replication-psync 146 seconds - unit/maxmemory 232 seconds - integration/replication 0 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 2 seconds - violations 0 seconds - defrag \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src' >>> valkey: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src' Hint: It's a good idea to run 'make test' ;) INSTALL valkey-server INSTALL valkey-benchmark INSTALL valkey-cli INSTALL SYMLINK redis-server -> valkey-server INSTALL SYMLINK redis-cli -> valkey-cli INSTALL SYMLINK redis-benchmark -> valkey-benchmark INSTALL SYMLINK redis-check-rdb -> valkey-check-rdb INSTALL SYMLINK redis-check-aof -> valkey-check-aof INSTALL SYMLINK redis-sentinel -> valkey-sentinel make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-7.2.8/src' >>> valkey-benchmark*: Running split function benchmark... '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/valkey-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-benchmark/usr/bin/valkey-benchmark' >>> valkey-benchmark*: Preparing subpackage valkey-benchmark... >>> valkey-benchmark*: Stripping binaries >>> valkey-benchmark*: Running postcheck for valkey-benchmark >>> valkey-cli*: Running split function cli... '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/valkey-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-cli/usr/bin/valkey-cli' >>> valkey-cli*: Preparing subpackage valkey-cli... >>> valkey-cli*: Stripping binaries >>> valkey-cli*: Running postcheck for valkey-cli >>> valkey-compat*: Running split function compat... '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-benchmark' '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-check-aof' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-aof' '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-check-rdb' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-rdb' '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-cli' '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-sentinel' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-sentinel' '/home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-server' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-server' >>> valkey-compat*: Preparing subpackage valkey-compat... >>> valkey-compat*: Script found. /bin/sh added as a dependency for valkey-compat-7.2.8-r0.apk >>> valkey-compat*: Adding .pre-install >>> valkey-compat*: Running postcheck for valkey-compat >>> valkey-openrc*: Running split function openrc... >>> valkey-openrc*: Preparing subpackage valkey-openrc... >>> valkey-openrc*: Running postcheck for valkey-openrc >>> valkey*: Running postcheck for valkey >>> valkey*: Preparing package valkey... >>> valkey*: Stripping binaries >>> valkey*: Script found. /bin/sh added as a dependency for valkey-7.2.8-r0.apk >>> valkey*: Adding .pre-install >>> valkey*: Adding .post-install >>> valkey-benchmark*: Scanning shared objects >>> valkey-cli*: Scanning shared objects >>> valkey-compat*: Scanning shared objects >>> valkey-openrc*: Scanning shared objects >>> valkey*: Scanning shared objects >>> valkey-benchmark*: Tracing dependencies... so:libc.musl-ppc64le.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-benchmark*: Package size: 528.0 KB >>> valkey-benchmark*: Compressing data... >>> valkey-benchmark*: Create checksum... >>> valkey-benchmark*: Create valkey-benchmark-7.2.8-r0.apk >>> valkey-cli*: Tracing dependencies... so:libc.musl-ppc64le.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-cli*: Package size: 632.0 KB >>> valkey-cli*: Compressing data... >>> valkey-cli*: Create checksum... >>> valkey-cli*: Create valkey-cli-7.2.8-r0.apk >>> valkey-compat*: Tracing dependencies... !redis !redict-compat /bin/sh valkey-cli=7.2.8-r0 valkey=7.2.8-r0 >>> valkey-compat*: Package size: 12.0 KB >>> valkey-compat*: Compressing data... >>> valkey-compat*: Create checksum... >>> valkey-compat*: Create valkey-compat-7.2.8-r0.apk >>> valkey-openrc*: Tracing dependencies... >>> valkey-openrc*: Package size: 32.0 KB >>> valkey-openrc*: Compressing data... >>> valkey-openrc*: Create checksum... >>> valkey-openrc*: Create valkey-openrc-7.2.8-r0.apk >>> valkey*: Tracing dependencies... /bin/sh so:libc.musl-ppc64le.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey*: Package size: 3.2 MB >>> valkey*: Compressing data... >>> valkey*: Create checksum... >>> valkey*: Create valkey-7.2.8-r0.apk >>> valkey: Build complete at Fri, 10 Jan 2025 15:20:52 +0000 elapsed time 0h 4m 28s >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Uninstalling dependencies... (1/8) Purging .makedepends-valkey (20250110.151624) (2/8) Purging linux-headers (6.6-r0) (3/8) Purging openssl-dev (3.3.2-r1) (4/8) Purging tcl (8.6.14-r1) (5/8) Purging tzdata (2024b-r0) (6/8) Purging procps-ng (4.0.4-r0) (7/8) Purging libintl (0.22.5-r0) (8/8) Purging libproc2 (4.0.4-r0) Executing busybox-1.36.1-r29.trigger OK: 415 MiB in 103 packages >>> valkey: Updating the main/ppc64le repository index... >>> valkey: Signing the index...