>>> megacmd: Building community/megacmd 1.6.3-r0 (using abuild 3.14.1-r1) started Fri, 01 Nov 2024 19:51:07 +0000
>>> megacmd: Validating /home/buildozer/aports/community/megacmd/APKBUILD...
>>> megacmd: Analyzing dependencies...
>>> megacmd: Installing for build: build-base autoconf autoconf-archive automake libtool megasdk-dev readline-dev
(1/44) Installing m4 (1.4.19-r3)
(2/44) Installing libbz2 (1.0.8-r6)
(3/44) Installing perl (5.40.0-r3)
(4/44) Installing autoconf (2.72-r0)
(5/44) Installing autoconf-archive (2024.10.16-r0)
(6/44) Installing automake (1.17-r0)
(7/44) Installing libltdl (2.4.7-r3)
(8/44) Installing libtool (2.4.7-r3)
(9/44) Installing c-ares-dev (1.34.2-r0)
(10/44) Installing crypto++ (8.9.0-r0)
(11/44) Installing crypto++-dev (8.9.0-r0)
(12/44) Installing brotli (1.1.0-r2)
(13/44) Installing brotli-dev (1.1.0-r2)
(14/44) Installing libidn2-dev (2.3.7-r0)
(15/44) Installing libpsl-utils (0.21.5-r3)
(16/44) Installing libpsl-dev (0.21.5-r3)
(17/44) Installing nghttp2-dev (1.64.0-r0)
(18/44) Installing openssl-dev (3.3.2-r3)
(19/44) Installing zlib-dev (1.3.1-r2)
(20/44) Installing zstd (1.5.6-r1)
(21/44) Installing zstd-dev (1.5.6-r1)
(22/44) Installing curl-dev (8.10.1-r0)
(23/44) Installing icu-data-en (74.2-r0)
Executing icu-data-en-74.2-r0.post-install
*
* If you need ICU with non-English locales and legacy charset support, install
* package icu-data-full.
*
(24/44) Installing icu-libs (74.2-r0)
(25/44) Installing icu (74.2-r0)
(26/44) Installing icu-dev (74.2-r0)
(27/44) Installing libsodium (1.0.20-r0)
(28/44) Installing libsodium-dev (1.0.20-r0)
(29/44) Installing sqlite (3.47.0-r0)
(30/44) Installing sqlite-libs (3.47.0-r0)
(31/44) Installing sqlite-dev (3.47.0-r0)
(32/44) Installing megasdk (4.17.1d-r0)
(33/44) Installing megasdk-dev (4.17.1d-r0)
(34/44) Installing libhistory (8.2.13-r0)
(35/44) Installing libformw (6.5_p20241006-r2)
(36/44) Installing libmenuw (6.5_p20241006-r2)
(37/44) Installing libpanelw (6.5_p20241006-r2)
(38/44) Installing libncurses++ (6.5_p20241006-r2)
(39/44) Installing ncurses-dev (6.5_p20241006-r2)
(40/44) Installing readline-dev (8.2.13-r0)
(41/44) Installing .makedepends-megacmd (20241101.195128)
(42/44) Installing perl-error (0.17029-r2)
(43/44) Installing perl-git (2.46.2-r0)
(44/44) Installing git-perl (2.46.2-r0)
Executing busybox-1.37.0-r5.trigger
OK: 337 MiB in 145 packages
>>> megacmd: Cleaning up srcdir
>>> megacmd: Cleaning up pkgdir
>>> megacmd: Cleaning up tmpdir
>>> megacmd: Fetching https://distfiles.alpinelinux.org/distfiles/v3.21/MEGAcmd-1.6.3.tar.gz
Connecting to distfiles.alpinelinux.org (172.105.82.32:443)
wget: server returned error: HTTP/1.1 404 Not Found
>>> megacmd: Fetching https://github.com/meganz/MEGAcmd/archive/refs/tags/1.6.3_Linux/MEGAcmd-1.6.3.tar.gz
Connecting to github.com (140.82.121.3:443)
Connecting to codeload.github.com (140.82.121.10:443)
saving to '/var/cache/distfiles/v3.21/MEGAcmd-1.6.3.tar.gz.part'
MEGAcmd-1.6.3.tar.gz 100% |********************************| 2036k  0:00:00 ETA
'/var/cache/distfiles/v3.21/MEGAcmd-1.6.3.tar.gz.part' saved
>>> megacmd: Fetching https://distfiles.alpinelinux.org/distfiles/v3.21/MEGAcmd-1.6.3.tar.gz
>>> megacmd: Checking sha512sums...
MEGAcmd-1.6.3.tar.gz: OK
xdg_data_home.patch: OK
unbundle-sdk.patch: OK
>>> megacmd: Unpacking /var/cache/distfiles/v3.21/MEGAcmd-1.6.3.tar.gz...
>>> megacmd: xdg_data_home.patch
patching file contrib/docs/DEBUG.md
patching file src/configurationmanager.cpp
patching file src/megacmd.cpp
patching file src/megacmdshell/megacmdshellcommunications.cpp
>>> megacmd: unbundle-sdk.patch
patching file src/include.am
patching file Makefile.am
patching file configure.ac
autoreconf: export WARNINGS=
autoreconf: Entering directory '.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4
aclocal: warning: couldn't open directory 'm4': No such file or directory
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
autoreconf: configure.ac: not using Intltool
autoreconf: configure.ac: not using Gtkdoc
autoreconf: running: aclocal --force -I m4
autoreconf: running: /usr/bin/autoconf --force
configure.ac:89: warning: The macro 'AC_PROG_LIBTOOL' is obsolete.
configure.ac:89: You should run autoupdate.
m4/libtool.m4:100: AC_PROG_LIBTOOL is expanded from...
configure.ac:89: the top level
configure.ac:97: warning: The macro 'AC_LANG_CPLUSPLUS' is obsolete.
configure.ac:97: You should run autoupdate.
./lib/autoconf/c.m4:270: AC_LANG_CPLUSPLUS is expanded from...
configure.ac:97: the top level
configure.ac:103: warning: The macro 'AC_STDC_HEADERS' is obsolete.
configure.ac:103: You should run autoupdate.
./lib/autoconf/oldnames.m4:75: AC_STDC_HEADERS is expanded from...
configure.ac:103: the top level
configure.ac:103: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:103: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
./lib/autoconf/oldnames.m4:75: AC_STDC_HEADERS is expanded from...
configure.ac:103: the top level
configure.ac:104: warning: The macro 'AC_HEADER_STDC' is obsolete.
configure.ac:104: You should run autoupdate.
./lib/autoconf/headers.m4:663: AC_HEADER_STDC is expanded from...
configure.ac:104: the top level
autoreconf: running: /usr/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:36: installing './compile'
configure.ac:48: installing './config.guess'
configure.ac:48: installing './config.sub'
configure.ac:45: installing './install-sh'
configure.ac:45: installing './missing'
src/include.am:52: warning: mega_exec_LDADD was already defined in condition TRUE, which includes condition WIN32 ...
Makefile.am:49:   'src/include.am' included from here
src/include.am:30: ... 'mega_exec_LDADD' previously defined here
Makefile.am:49:   'src/include.am' included from here
Makefile.am: installing './depcomp'
autoreconf: Leaving directory '.'
checking for armv7-alpine-linux-musleabihf-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking whether gcc understands -c and -o together... yes
configure: creating ./config.status
config.status: creating Makefile
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for wchar.h... yes
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking whether _XOPEN_SOURCE should be defined... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether sleep supports fractional seconds... yes
checking filesystem timestamp resolution... 2
checking whether build environment is sane... yes
checking for a race-free mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets $(MAKE)... yes
checking whether make supports the include directive... yes (GNU style)
checking whether make supports nested variables... yes
checking xargs -n works... yes
checking dependency style of gcc... gcc3
checking build system type... armv7-alpine-linux-musleabihf
checking host system type... armv7-alpine-linux-musleabihf
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/armv7-alpine-linux-musleabihf/bin/ld
checking if the linker (/usr/armv7-alpine-linux-musleabihf/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 98304
checking how to convert armv7-alpine-linux-musleabihf file names to armv7-alpine-linux-musleabihf format... func_convert_file_noop
checking how to convert armv7-alpine-linux-musleabihf file names to toolchain format... func_convert_file_noop
checking for /usr/armv7-alpine-linux-musleabihf/bin/ld option to reload object files... -r
checking for armv7-alpine-linux-musleabihf-file... no
checking for file... file
checking for armv7-alpine-linux-musleabihf-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for armv7-alpine-linux-musleabihf-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for armv7-alpine-linux-musleabihf-ar... no
checking for ar... ar
checking for archiver @FILE support... @
checking for armv7-alpine-linux-musleabihf-strip... no
checking for strip... strip
checking for armv7-alpine-linux-musleabihf-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for armv7-alpine-linux-musleabihf-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/armv7-alpine-linux-musleabihf/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for size_t... yes
checking for uint8_t... yes
checking for uint16_t... yes
checking for uint32_t... yes
checking for uint64_t... yes
checking for pid_t... yes
checking for off_t... yes
checking for ssize_t... yes
checking for armv7-alpine-linux-musleabihf-g++... armv7-alpine-linux-musleabihf-g++
checking whether the compiler supports GNU Objective C++... no
checking whether armv7-alpine-linux-musleabihf-g++ accepts -g... no
checking dependency style of armv7-alpine-linux-musleabihf-g++... gcc3
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/armv7-alpine-linux-musleabihf/bin/ld
checking if the linker (/usr/armv7-alpine-linux-musleabihf/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/armv7-alpine-linux-musleabihf/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/armv7-alpine-linux-musleabihf/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether build environment is sane... yes
checking for cppcheck... no
checking whether g++ supports C++11 features with -std=gnu++11... yes
checking for egrep... (cached) /bin/grep -E
checking for egrep... (cached) /bin/grep -E
checking for _Bool... no
checking for stdbool.h that conforms to C99 or later... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for gcc option to enable large file support... none needed
checking for declarations of fseeko and ftello... yes
checking for off_t... (cached) yes
checking size of uint64_t... 8
checking whether struct tm is in sys/time.h or time.h... time.h
checking for off_t... (cached) yes
checking for size_t... (cached) yes
checking for arpa/inet.h... yes
checking for netdb.h... yes
checking for netinet/in.h... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for sys/socket.h... yes
checking for sys/timeb.h... yes
checking for htonl... no
checking for glob.h... yes
checking for malloc.h... yes
checking for sys/malloc.h... no
checking for malloc/malloc.h... no
checking whether the C++ compiler accepts -fPIC... yes
checking whether the linker accepts -fPIC... yes
checking if building for Win32 platform... no
checking for libpcrecpp... --with-pcre not specified
checking for pcrecpp.h... no
checking for main in -lpcrecpp... no
checking for pcre_compile in -lpcre... no
checking for termcap... --with-termcap not specified
checking for tputs in -ltermcap... no
configure: termcap library not found or not usable.
checking for Readline... --with-readline not specified
checking for readline/readline.h... yes
checking for rl_save_prompt in -lreadline... yes
checking for SQLite... --with-sqlite not specified
configure: Using SQLite3 as the default DB access layer.
checking for sqlite3.h... yes
checking for sqlite3_open in -lsqlite3... yes
checking for pthread_create in -lpthread... yes
checking that generated files are newer than configure... done
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/megacmdconfig.h
config.status: executing depfiles commands
config.status: executing libtool commands
checking for armv7-alpine-linux-musleabihf-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for libmega... yes
checking that generated files are newer than configure... done
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/megacmdconfig.h
config.status: src/megacmdconfig.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
configure: MEGAcmd configuration:

  MEGACMD version:      1.6.3
  Install prefix:   /usr
  Compiler:         g++ -std=gnu++11
  CXXFLAGS:         -Os -fstack-clash-protection -Wformat -Werror=format-security -D_GLIBCXX_ASSERTIONS=1 -D_LIBCPP_ENABLE_THREAD_SAFETY_ANNOTATIONS=1 -D_LIBCPP_ENABLE_HARDENED_MODE=1 -flto=auto -DNDEBUG=1 -fPIC -DENABLE_BACKUPS=1
  CPPFLAGS:         
  LDFLAGS:          -pthread -Wl,--as-needed,-O1,--sort-common
  debug:            no
  static:           no
  posix threads:    yes

  Readline:           -lreadline
  Termcap:            
  PCRE:               
  SDK includes:     -I/usr/include/mega -I/usr/include/mega/posix

make  all-am
make[1]: Entering directory '/home/buildozer/aports/community/megacmd/src/MEGAcmd-1.6.3_Linux'
  CXX      src/mega_exec-megacmdcommonutils.o
  CXX      src/megacmdshell/mega_exec-megacmdshellcommunications.o
  CXX      src/mega_cmd_server-megacmd.o
  CXX      src/mega_cmd_server-comunicationsmanager.o
  CXX      src/mega_cmd_server-megacmdutils.o
  CXX      src/mega_cmd_server-megacmdcommonutils.o
  CXX      src/mega_cmd_server-configurationmanager.o
  CXX      src/mega_cmd_server-megacmdlogger.o
  CXX      src/mega_cmd_server-megacmdsandbox.o
  CXX      src/mega_cmd_server-listeners.o
  CXX      src/mega_cmd_server-megacmdexecuter.o
  CXX      src/mega_cmd_server-megacmdtransfermanager.o
  CXX      src/mega_cmd_server-comunicationsmanagerportsockets.o
  CXX      src/mega_cmd_server-comunicationsmanagerfilesockets.o
  CXX      src/mega_cmd-megacmdcommonutils.o
  CXX      src/megacmdshell/mega_cmd-megacmdshellcommunications.o
  CXX      src/megacmdshell/mega_cmd-megacmdshell.o
  CXX      src/client/mega_exec-megacmdclient.o
  CXXLD    mega-exec
  CXXLD    mega-cmd
src/megacmd.cpp: In function 'bool megacmd::executeUpdater(bool*, bool)':
src/megacmd.cpp:3455:31: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
 3455 |             donotinstallstr = "--do-not-install";
      |                               ^~~~~~~~~~~~~~~~~~
src/megacmd.cpp:3468:26: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
 3468 |         char * args[] = {"mega-cmd-updater", "--normal-update", donotinstallstr, NULL};
      |                          ^~~~~~~~~~~~~~~~~~
src/megacmd.cpp:3468:46: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
 3468 |         char * args[] = {"mega-cmd-updater", "--normal-update", donotinstallstr, NULL};
      |                                              ^~~~~~~~~~~~~~~~~
src/megacmd.cpp: In function 'bool megacmd::restartServer()':
src/megacmd.cpp:3589:19: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
 3589 |         argv[j++]="--wait-for";
      |                   ^~~~~~~~~~~~
  OBJCXXLD mega-cmd-server
make[1]: Leaving directory '/home/buildozer/aports/community/megacmd/src/MEGAcmd-1.6.3_Linux'
>>> megacmd: Entering fakeroot...
make  install-am
make[1]: Entering directory '/home/buildozer/aports/community/megacmd/src/MEGAcmd-1.6.3_Linux'
make[2]: Entering directory '/home/buildozer/aports/community/megacmd/src/MEGAcmd-1.6.3_Linux'
 /bin/mkdir -p '/home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin'
 /bin/mkdir -p '/home/buildozer/aports/community/megacmd/pkg/megacmd/usr/share/bash-completion/completions'
 /bin/mkdir -p '/home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin'
  /bin/sh ./libtool --tag=CXX  --mode=install /usr/bin/install -c mega-cmd mega-exec mega-cmd-server '/home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin'
 /usr/bin/install -c -m 644 src/client/megacmd_completion.sh '/home/buildozer/aports/community/megacmd/pkg/megacmd/usr/share/bash-completion/completions'
libtool: install: /usr/bin/install -c mega-cmd /home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin/mega-cmd
libtool: install: /usr/bin/install -c mega-exec /home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin/mega-exec
libtool: install: /usr/bin/install -c mega-cmd-server /home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin/mega-cmd-server
 /usr/bin/install -c src/client/mega-attr src/client/mega-cd src/client/mega-confirm src/client/mega-cp src/client/mega-debug src/client/mega-du src/client/mega-df src/client/mega-proxy src/client/mega-export src/client/mega-find src/client/mega-get src/client/mega-help src/client/mega-https src/client/mega-webdav src/client/mega-permissions src/client/mega-deleteversions src/client/mega-transfers src/client/mega-import src/client/mega-invite src/client/mega-ipc src/client/mega-killsession src/client/mega-lcd src/client/mega-log src/client/mega-login src/client/mega-logout src/client/mega-lpwd src/client/mega-ls src/client/mega-backup src/client/mega-mkdir src/client/mega-mount src/client/mega-mv src/client/mega-passwd src/client/mega-preview src/client/mega-put src/client/mega-speedlimit src/client/mega-pwd src/client/mega-quit src/client/mega-reload src/client/mega-rm src/client/mega-session '/home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin'
 /usr/bin/install -c src/client/mega-share src/client/mega-showpcr src/client/mega-signup src/client/mega-sync src/client/mega-exclude src/client/mega-thumbnail src/client/mega-userattr src/client/mega-users src/client/mega-version src/client/mega-whoami src/client/mega-cat src/client/mega-tree src/client/mega-mediainfo src/client/mega-graphics src/client/mega-ftp src/client/mega-cancel src/client/mega-confirmcancel src/client/mega-errorcode '/home/buildozer/aports/community/megacmd/pkg/megacmd/usr/bin'
make[2]: Leaving directory '/home/buildozer/aports/community/megacmd/src/MEGAcmd-1.6.3_Linux'
make[1]: Leaving directory '/home/buildozer/aports/community/megacmd/src/MEGAcmd-1.6.3_Linux'
>>> megacmd-bash-completion*: Running split function bashcomp...
'usr/share/bash-completion/completions' -> '/home/buildozer/aports/community/megacmd/pkg/megacmd-bash-completion/usr/share/bash-completion/completions'
>>> megacmd-bash-completion*: Preparing subpackage megacmd-bash-completion...
>>> megacmd-bash-completion*: Running postcheck for megacmd-bash-completion
>>> megacmd*: Running postcheck for megacmd
>>> megacmd*: Preparing package megacmd...
>>> megacmd*: Stripping binaries
>>> megacmd-bash-completion*: Scanning shared objects
>>> megacmd*: Scanning shared objects
>>> megacmd-bash-completion*: Tracing dependencies...
>>> megacmd-bash-completion*: Package size: 1.9 KB
>>> megacmd-bash-completion*: Compressing data...
>>> megacmd-bash-completion*: Create checksum...
>>> megacmd-bash-completion*: Create megacmd-bash-completion-1.6.3-r0.apk
>>> megacmd*: Tracing dependencies...
	so:libc.musl-armv7.so.1
	so:libgcc_s.so.1
	so:libmega.so.41701
	so:libreadline.so.8
	so:libstdc++.so.6
>>> megacmd*: Package size: 626.6 KB
>>> megacmd*: Compressing data...
>>> megacmd*: Create checksum...
>>> megacmd*: Create megacmd-1.6.3-r0.apk
>>> megacmd: Build complete at Fri, 01 Nov 2024 19:52:19 +0000 elapsed time 0h 1m 12s
>>> megacmd: Cleaning up srcdir
>>> megacmd: Cleaning up pkgdir
>>> megacmd: Uninstalling dependencies...
(1/44) Purging .makedepends-megacmd (20241101.195128)
(2/44) Purging autoconf-archive (2024.10.16-r0)
(3/44) Purging autoconf (2.72-r0)
(4/44) Purging m4 (1.4.19-r3)
(5/44) Purging automake (1.17-r0)
(6/44) Purging libtool (2.4.7-r3)
(7/44) Purging libltdl (2.4.7-r3)
(8/44) Purging megasdk-dev (4.17.1d-r0)
(9/44) Purging crypto++-dev (8.9.0-r0)
(10/44) Purging curl-dev (8.10.1-r0)
(11/44) Purging icu-dev (74.2-r0)
(12/44) Purging libsodium-dev (1.0.20-r0)
(13/44) Purging sqlite-dev (3.47.0-r0)
(14/44) Purging sqlite (3.47.0-r0)
(15/44) Purging megasdk (4.17.1d-r0)
(16/44) Purging readline-dev (8.2.13-r0)
(17/44) Purging libhistory (8.2.13-r0)
(18/44) Purging brotli-dev (1.1.0-r2)
(19/44) Purging brotli (1.1.0-r2)
(20/44) Purging c-ares-dev (1.34.2-r0)
(21/44) Purging crypto++ (8.9.0-r0)
(22/44) Purging git-perl (2.46.2-r0)
(23/44) Purging perl-git (2.46.2-r0)
(24/44) Purging perl-error (0.17029-r2)
(25/44) Purging perl (5.40.0-r3)
(26/44) Purging icu (74.2-r0)
(27/44) Purging icu-libs (74.2-r0)
(28/44) Purging libbz2 (1.0.8-r6)
(29/44) Purging libpsl-dev (0.21.5-r3)
(30/44) Purging libpsl-utils (0.21.5-r3)
(31/44) Purging libsodium (1.0.20-r0)
(32/44) Purging ncurses-dev (6.5_p20241006-r2)
(33/44) Purging libncurses++ (6.5_p20241006-r2)
(34/44) Purging libpanelw (6.5_p20241006-r2)
(35/44) Purging nghttp2-dev (1.64.0-r0)
(36/44) Purging openssl-dev (3.3.2-r3)
(37/44) Purging sqlite-libs (3.47.0-r0)
(38/44) Purging zlib-dev (1.3.1-r2)
(39/44) Purging zstd-dev (1.5.6-r1)
(40/44) Purging zstd (1.5.6-r1)
(41/44) Purging icu-data-en (74.2-r0)
(42/44) Purging libformw (6.5_p20241006-r2)
(43/44) Purging libidn2-dev (2.3.7-r0)
(44/44) Purging libmenuw (6.5_p20241006-r2)
Executing busybox-1.37.0-r5.trigger
OK: 271 MiB in 101 packages
>>> megacmd: Updating the community/armv7 repository index...
>>> megacmd: Signing the index...