>>> redict: Building community/redict 7.3.2-r0 (using abuild 3.14.1-r4) started Fri, 10 Jan 2025 15:16:22 +0000 >>> redict: Validating /home/buildozer/aports/community/redict/APKBUILD... >>> redict: Analyzing dependencies... >>> redict: Installing for build: build-base linux-headers openssl-dev>3 tcl procps (1/8) Installing linux-headers (6.6-r1) (2/8) Installing openssl-dev (3.3.2-r4) (3/8) Installing tzdata (2024b-r1) (4/8) Installing tcl (8.6.15-r0) (5/8) Installing libintl (0.22.5-r0) (6/8) Installing libproc2 (4.0.4-r2) (7/8) Installing procps-ng (4.0.4-r2) (8/8) Installing .makedepends-redict (20250110.151624) Executing busybox-1.37.0-r9.trigger OK: 258 MiB in 107 packages >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Cleaning up tmpdir >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.2.tar.gz Connecting to distfiles.alpinelinux.org (172.105.82.32:443) wget: server returned error: HTTP/1.1 404 Not Found >>> redict: Fetching redict-7.3.2.tar.gz::https://codeberg.org/redict/redict/archive/7.3.2.tar.gz Connecting to codeberg.org (217.197.91.145:443) saving to '/var/cache/distfiles/redict-7.3.2.tar.gz.part' redict-7.3.2.tar.gz. 20% |****** | 672k 0:00:03 ETA redict-7.3.2.tar.gz. 100% |********************************| 3335k 0:00:00 ETA '/var/cache/distfiles/redict-7.3.2.tar.gz.part' saved >>> redict: Fetching https://distfiles.alpinelinux.org/distfiles/edge/redict-7.3.2.tar.gz >>> redict: Checking sha512sums... redict-7.3.2.tar.gz: OK redict.conf.patch: OK sentinel.conf.patch: OK redict.initd: OK redict.confd: OK redict-sentinel.initd: OK redict.logrotate: OK >>> redict: Unpacking /var/cache/distfiles/redict-7.3.2.tar.gz... >>> redict: redict.conf.patch patching file redict.conf Hunk #1 succeeded at 153 (offset 41 lines). Hunk #2 succeeded at 304 (offset 63 lines). Hunk #3 succeeded at 322 (offset 63 lines). Hunk #4 succeeded at 334 (offset 64 lines). Hunk #5 succeeded at 489 (offset 67 lines). >>> redict: sentinel.conf.patch patching file sentinel.conf Hunk #1 succeeded at 31 with fuzz 2 (offset -2 lines). make -C src all make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep rm -rf redict-server redict-sentinel redict-cli redict-benchmark redict-check-rdb redict-check-aof *.o *.gcda *.gcno *.gcov redict.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d quicklist.d ae.d anet.d dict.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d crc16.d endianconv.d slowlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d redict-check-rdb.d redict-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script_lua.d script.d functions.d function_lua.d commands.d strl.d connection.d unix.d logreqres.d anet.d adlist.d dict.d redict-cli.d zmalloc.d release.d ae.d redictassert.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d ae.d anet.d redict-benchmark.d adlist.d dict.d zmalloc.d redictassert.d release.d crcspeed.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/tests/modules' (rm -f .make-*) echo STD=-pedantic -DREDICT_STATIC='' -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes >> .make-settings echo OPT=-O3 -flto=auto -fno-omit-frame-pointer >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=yes >> .make-settings echo USE_SYSTEMD= >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo REDICT_CFLAGS= >> .make-settings echo REDICT_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -DREDICT_STATIC='' -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/hiredict -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=1 -DBUILD_TLS_MODULE=0 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -O3 -flto=auto -fno-omit-frame-pointer -g -ggdb -rdynamic >> .make-settings (cd ../deps && make hiredict linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps' (cd hiredict && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE hiredict MAKE linenoise cd hiredict && make static USE_SSL=1 cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2" MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' MAKE hdr_histogram cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' gcc -std=c99 -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' gcc -Wall -Os -g -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c make[3]: Entering directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic alloc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic net.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic hiredict.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sds.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic async.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic read.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic sockcompat.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c gcc -std=c99 -c -O3 -fPIC -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHIREDICT_TEST_SSL -Wall -Wextra -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -pedantic ssl.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/fpconv' gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c gcc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DREDIS_STATIC='' -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/linenoise' ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hdr_histogram' ar rcs libhiredict.a alloc.o net.o hiredict.o sds.o async.o read.o sockcompat.o ar rcs libhiredict_ssl.a ssl.o make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/hiredict' ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a gcc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm gcc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/deps' CC threads_mngr.o CC adlist.o CC quicklist.o CC ae.o CC anet.o CC dict.o CC kvstore.o CC server.o CC sds.o CC zmalloc.o CC lzf_c.o CC lzf_d.o CC pqsort.o CC zipmap.o CC sha1.o CC ziplist.o CC release.o CC networking.o CC util.o CC object.o CC db.o CC replication.o CC rdb.o CC t_string.o CC t_list.o CC t_set.o CC t_zset.o CC t_hash.o CC config.o CC aof.o CC pubsub.o CC multi.o CC debug.o CC sort.o CC intset.o CC syncio.o CC cluster.o CC cluster_legacy.o CC crc16.o CC endianconv.o CC slowlog.o CC eval.o CC bio.o CC rio.o CC rand.o CC memtest.o CC syscheck.o CC crcspeed.o CC crc64.o CC bitops.o CC sentinel.o CC notify.o CC setproctitle.o CC blocked.o CC hyperloglog.o CC latency.o CC sparkline.o CC redict-check-rdb.o CC redict-check-aof.o CC geo.o CC lazyfree.o CC module.o CC evict.o CC expire.o CC geohash.o CC geohash_helper.o CC childinfo.o CC defrag.o CC siphash.o CC rax.o CC t_stream.o CC listpack.o CC localtime.o CC lolwut.o CC lolwut5.o CC lolwut6.o CC acl.o CC tracking.o CC socket.o CC tls.o CC sha256.o CC timeout.o CC setcpuaffinity.o CC monotonic.o CC mt19937-64.o CC resp_parser.o CC call_reply.o CC script_lua.o CC script.o CC functions.o CC function_lua.o CC commands.o CC strl.o CC connection.o CC unix.o CC logreqres.o CC redict-cli.o CC redictassert.o CC cli_common.o CC cli_commands.o CC redict-benchmark.o LINK redict-benchmark LINK redict-server LINK redict-cli INSTALL redict-sentinel INSTALL redict-check-aof INSTALL redict-check-rdb Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' make -C src test make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' CC Makefile.dep CC release.o LINK redict-server LINK redict-cli LINK redict-benchmark INSTALL redict-check-aof Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 32151 Testing unit/printver [ready]: 32153 Testing unit/dump [ready]: 32154 Testing unit/auth [ready]: 32152 Testing unit/protocol [ready]: 32155 Testing unit/keyspace [ready]: 32156 Testing unit/scan [ready]: 32157 Testing unit/info [ready]: 32158 Testing unit/info-command [ready]: 32159 Testing unit/type/string [ready]: 32160 Testing unit/type/incr [ready]: 32161 Testing unit/type/list [ready]: 32162 Testing unit/type/list-2 [ready]: 32163 Testing unit/type/list-3 [ready]: 32164 Testing unit/type/set [ready]: 32165 Testing unit/type/zset [ready]: 32166 Testing unit/type/hash [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (2 ms) [ok]: DEL against a single item (1 ms) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (1 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (1 ms) [ok]: Vararg DEL (2 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (1 ms) Testing Redict version 7.3.2 (00000000) [ok]: Untagged multi-key commands (1 ms) [ok]: RESTORE can set an absolute expire (2 ms) [ok]: Explicit regression for a list bug (2 ms) [ok]: KEYS with pattern (3 ms) [ok]: RESTORE with ABSTTL in the past (2 ms) [ok]: SET and GET an item (3 ms) [ok]: KEYS to get all keys (1 ms) [ok]: INCR against non existing key (1 ms) [ok]: INCR against key created by incr itself (1 ms) [ok]: DBSIZE (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: SET and GET an empty item (1 ms) [ok]: info command with at most one sub command (4 ms) [ok]: RESTORE can set LRU (2 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (3 ms) [ok]: KEYS with hashtag (2 ms) [ok]: info command with one sub-section (1 ms) [ok]: DECR against key is not exist and incr (3 ms) [ok]: info command with multiple sub-sections (1 ms) [ok]: INCR against key originally set with SET (1 ms) [ok]: DEL all keys (2 ms) [ok]: INCR over 32bit value (0 ms) [ok]: HSET/HLEN - Small hash creation (2 ms) [ok]: RESTORE can set LFU (3 ms) [ok]: INCRBY over 32bit value with over 32bit increment (1 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: packed node check compression with insert and pop (6 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: INCR fails against key with spaces (left) (1 ms) [ok]: Check encoding - listpack (1 ms) [ok]: packed node check compression combined with trim (2 ms) [ok]: INCR fails against key with spaces (right) (1 ms) [ok]: INCR fails against key with spaces (both) (1 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (3 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: ZSET basic ZADD and score update - listpack (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (1 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (1 ms) [ok]: packed node check compression with lset (2 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: INCR fails against a key holding a list (2 ms) [ok]: ZADD XX option without key - listpack (1 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (1 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: DECRBY against key is not exist (1 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (1 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (1 ms) [ok]: INCR uses shared objects in the 0-9999 range (2 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (1 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: HRANDFIELD - listpack (9 ms) [ok]: INCRBYFLOAT against non existing key (2 ms) [ok]: INCRBYFLOAT against key originally set with SET (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (2 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: ZADD XX and NX are not compatible - listpack (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: ZADD NX with non existing key - listpack (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (1 ms) [ok]: INCRBYFLOAT decrement (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: string to double with null terminator (1 ms) [ok]: ZADD LT and NX are not compatible - listpack (1 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (21 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (0 ms) [ok]: No negative zero (2 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (1 ms) [ok]: HRANDFIELD - hashtable (8 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (3 ms) [ok]: ZADD INCR LT/GT with inf - listpack (3 ms) [ok]: incr operation should update encoding from raw to int (2 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (1 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (0 ms) [ok]: HRANDFIELD count overflow (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (1 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: ZADD INCR works with a single score-elemenet pair - listpack (1 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (0 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (1 ms) [ok]: incrby operation should update encoding from raw to int (1 ms) [ok]: SADD against non set (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (1 ms) [ok]: ZINCRBY against invalid incr value - listpack (0 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: SADD a non-integer against a small intset (2 ms) [ok]: ZADD - Variadic version base case - listpack (1 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (1 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (0 ms) [ok]: Handle an empty query (44 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (2 ms) [ok]: ZREM variadic version - listpack (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (0 ms) [ok]: ZRANGE basics - listpack (5 ms) [ok]: ZREVRANGE basics - listpack (4 ms) [ok]: ZRANK/ZREVRANK basics - listpack (3 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: SADD a non-integer against a large intset (19 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: SADD an integer larger than 64 bits (0 ms) [ok]: ZINCRBY - increment and decrement - listpack (2 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (10 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (3 ms) [ok]: SADD an integer larger than 64 bits to a large intset (17 ms) [ok]: Very big payload in GET/SET (59 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (8 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: Negative multibulk length (44 ms) [ok]: Out of range multibulk length (1 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: Negative multibulk payload length (1 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (73 ms) [ok]: Out of range multibulk payload length (1 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (5 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: Multi bulk request not followed by bulk arguments (1 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Unbalanced number of quotes (1 ms) [ok]: ZLEXCOUNT advanced - listpack (3 ms) [ok]: {standalone} SCAN basic (99 ms) [1/91 done]: unit/printver (1 seconds) Testing unit/type/stream [2/91 done]: unit/type/incr (1 seconds) Testing unit/type/stream-cgroups [ok]: ZRANGEBYLEX with LIMIT - listpack (11 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (1 ms) [3/91 done]: unit/info-command (1 seconds) Testing unit/sort [ok]: latencystats: disable/enable (3 ms) [ok]: latencystats: configure percentiles (3 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (23 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (1 ms) [ok]: latencystats: bad configure percentiles (4 ms) [ok]: Protocol desync regression test #1 (40 ms) [ok]: latencystats: blocking commands (4 ms) [ok]: latencystats: subcommands (2 ms) [ok]: ZREMRANGEBYRANK basics - listpack (10 ms) [ok]: Regression for quicklist #3343 bug (146 ms) [ok]: ZREMRANGEBYLEX basics - listpack (20 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (89 ms) [ok]: ZUNIONSTORE with empty set - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (2 ms) [ok]: ZUNIONSTORE basics - listpack (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (3 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: Protocol desync regression test #2 (40 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (1 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (1 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (1 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - listpack (1 ms) [ok]: ZINTER RESP3 - listpack (1 ms) [ok]: ZINTERSTORE with weights - listpack (0 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (1 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (3 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single (23 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (2 ms) [ok]: ZINTERSTORE with NaN weights - listpack (1 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (1 ms) [ok]: ZDIFF subtracting set from itself - listpack (1 ms) [ok]: latencystats: measure latency (54 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (2 ms) [ok]: {standalone} SCAN COUNT (97 ms) [ok]: errorstats: failed call authentication error (3 ms) [ok]: errorstats: failed call within MULTI/EXEC (4 ms) [ok]: errorstats: failed call within LUA (4 ms) [ok]: errorstats: failed call NOSCRIPT error (2 ms) [ok]: errorstats: failed call NOGROUP error (2 ms) [ok]: errorstats: rejected call unknown command (2 ms) [ok]: Protocol desync regression test #3 (40 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (1 ms) [ok]: errorstats: rejected call within MULTI/EXEC (4 ms) [ok]: errorstats: rejected call due to wrong arity (2 ms) [ok]: RESP3 attributes (2 ms) [ok]: RESP3 attributes readraw (2 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: test big number parsing (1 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (1 ms) [ok]: errorstats: rejected call by OOM error (3 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (1 ms) [ok]: test bool parsing (2 ms) [ok]: test verbatim str parsing (0 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: errorstats: rejected call by authorization error (3 ms) [ok]: XADD wrong number of args (1 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (1 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (1 ms) [ok]: XREADGROUP will return only new elements (1 ms) [ok]: errorstats: blocking commands (3 ms) [ok]: XADD IDs are incremental (2 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (1 ms) [ok]: XADD IDs are incremental when ms is the same as well (1 ms) [ok]: XPENDING only group (0 ms) [ok]: XADD IDs correctly report an error when overflowing (1 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (1 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: Listpack: SORT BY key (1 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (47 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: Check compression with recompress (91 ms) [ok]: HRANDFIELD with - hashtable (210 ms) [ok]: XPENDING with IDLE (21 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (1 ms) [ok]: XACK should fail if got at least one invalid ID (1 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (2 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (2 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (2 ms) [ok]: test large number of args (56 ms) [ok]: test argument rewriting - issue 9598 (1 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (47 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (25 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (2 ms) [ok]: Variadic SADD (0 ms) [ok]: {standalone} SCAN MATCH (91 ms) [ok]: Blocking XREADGROUP: key deleted (5 ms) [ok]: Blocking XREADGROUP: key type changed with SET (2 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (4 ms) [ok]: Blocking XREADGROUP: flushed DB (2 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (3 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (4 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (3 ms) [ok]: Blocking XREAD: key type changed with SET (2 ms) [ok]: MIGRATE is caching connections (229 ms) [ok]: plain node check compression with insert and pop (367 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (105 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: XADD with MAXLEN option (191 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (8 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (7 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (2 ms) [ok]: {standalone} SCAN TYPE (147 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (1 ms) [ok]: HRANDFIELD with - listpack (227 ms) [ok]: Crash due to wrongly recompress after lrem (231 ms) [ok]: errorstats: limit errors will not increase indefinitely (251 ms) [ok]: plain node check compression combined with trim (131 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (48 ms) [4/91 done]: unit/protocol (1 seconds) Testing unit/expire [ok]: {standalone} SCAN unknown type (93 ms) [ok]: Set encoding after DEBUG RELOAD (262 ms) [ok]: SREM basics - $type (1 ms) [ok]: SREM basics - $type (18 ms) [ok]: SREM basics - intset (2 ms) [ok]: SREM with multiple arguments (1 ms) [ok]: SREM variadic version with more args needed to destroy the key (2 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (48 ms) [ok]: SINTERCARD with illegal arguments (3 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: stats: eventloop metrics (112 ms) [ok]: XADD with MAXLEN option and the '=' argument (178 ms) [ok]: {standalone} SCAN with expired keys (93 ms) [ok]: Generated sets must be encoded correctly - regular (1 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: EXPIRE - set timeouts multiple times (1 ms) [ok]: EXPIRE - It should be still possible to read 'x' (1 ms) [ok]: HSET/HLEN - Big hash creation (180 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (18 ms) [ok]: HGET against the small hash (1 ms) [ok]: Quicklist: SORT BY key (15 ms) [ok]: Quicklist: SORT BY key with limit (3 ms) [ok]: SUNION with two sets - regular (9 ms) [ok]: SUNIONSTORE with two sets - regular (10 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (1 ms) [ok]: SINTERSTORE with three sets - regular (1 ms) [ok]: Quicklist: SORT BY hash field (16 ms) [ok]: SUNION with non existing keys - regular (9 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: plain node check compression with lset (180 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (8 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (88 ms) [ok]: {standalone} SSCAN with encoding intset (3 ms) [ok]: {standalone} SSCAN with encoding listpack (2 ms) [ok]: {standalone} SSCAN with encoding hashtable (4 ms) [ok]: XADD with MAXLEN option and the '~' argument (117 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: {standalone} HSCAN with encoding listpack (2 ms) [ok]: HGET against the big hash (95 ms) [ok]: HGET against non existing key (1 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (1 ms) [ok]: HSETNX target key missing - big hash (0 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (1 ms) [ok]: HMSET - small hash (0 ms) [ok]: Generated sets must be encoded correctly - intset (1 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (1 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (27 ms) [ok]: HMSET - big hash (63 ms) [ok]: {standalone} HSCAN with encoding hashtable (102 ms) [ok]: HMGET against non existing key and fields (4 ms) [ok]: SUNION with two sets - intset (10 ms) [ok]: {standalone} ZSCAN with encoding listpack (3 ms) [ok]: Hash commands against wrong type (4 ms) [ok]: HMGET - small hash (1 ms) [ok]: SUNIONSTORE with two sets - intset (9 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (1 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SUNION with non existing keys - intset (9 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (7 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (1 ms) [ok]: XADD with MINID option (164 ms) [ok]: XTRIM with MINID option (1 ms) [ok]: XTRIM with MINID option, big delta from master record (2 ms) [ok]: HMGET - big hash (58 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (33 ms) [ok]: HKEYS - small hash (1 ms) [ok]: SUNION hashtable and listpack (2 ms) [ok]: SDIFF with first set empty (1 ms) [ok]: SDIFF with same set two times (1 ms) [ok]: HKEYS - big hash (14 ms) [ok]: HVALS - small hash (0 ms) [ok]: {standalone} ZSCAN with encoding skiplist (90 ms) [ok]: HVALS - big hash (2 ms) [ok]: HGETALL - small hash (1 ms) [ok]: Test LPUSH and LPOP on plain nodes (19 ms) [ok]: {standalone} SCAN guarantees check under write load (36 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (1 ms) [ok]: Test LINDEX and LINSERT on plain nodes (2 ms) [ok]: {standalone} SSCAN with PATTERN (1 ms) [ok]: Test LTRIM on plain nodes (2 ms) [ok]: {standalone} HSCAN with PATTERN (1 ms) [ok]: {standalone} HSCAN with NOVALUES (1 ms) [ok]: {standalone} ZSCAN with PATTERN (0 ms) [ok]: Test LREM on plain nodes (2 ms) [ok]: Test LPOS on plain nodes (2 ms) [ok]: HGETALL - big hash (39 ms) [ok]: HGETALL against non-existing key (0 ms) [ok]: HDEL and return value (1 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (1 ms) [ok]: Test LMOVE on plain nodes (4 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (0 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (1 ms) [ok]: HINCRBY against non existing hash key (1 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (1 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBY fails against hash value with spaces (left) (1 ms) [ok]: HINCRBY fails against hash value with spaces (right) (0 ms) [ok]: HINCRBY can detect overflows (1 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (1 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (0 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (1 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (1 ms) [ok]: HSTRLEN against the big hash (118 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (4 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (3 ms) [ok]: Hash ziplist regression test for large keys (0 ms) [ok]: DEL against expired key (1101 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (158 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (1 ms) [ok]: Commands pipelining (0 ms) [ok]: Non existing command (1 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (0 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (1 ms) [ok]: RENAME against non existing source key (0 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (1 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (1 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (0 ms) [ok]: COPY for string ensures that copied data is independent of copying data (2 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (1 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: Hash fuzzing #1 - 10 fields (42 ms) [ok]: Test LSET with packed / plain combinations (180 ms) [ok]: Test LSET with packed is split in the middle (4 ms) [ok]: Hash fuzzing #2 - 10 fields (34 ms) [ok]: COPY basic usage for list - quicklist (50 ms) [ok]: COPY basic usage for list - listpack (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (34 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (13 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: COPY basic usage for hashtable hash (21 ms) [ok]: Test LSET with packed consist only one item (181 ms) [ok]: Crash due to delete entry from a compress quicklist node (3 ms) [ok]: Crash due to split quicklist node wrongly (2 ms) [ok]: Test LPUSH and LPOP on plain nodes (50 ms) [ok]: Test LINDEX and LINSERT on plain nodes (2 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (2 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: COPY basic usage for stream (200 ms) [ok]: COPY basic usage for stream-cgroups (10 ms) [ok]: MOVE basic usage (1 ms) [ok]: MOVE against key existing in the target DB (1 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (3 ms) [ok]: MOVE does not create an expire if it does not exist (2 ms) [ok]: SET/GET keys in different DBs (2 ms) [ok]: RANDOMKEY (15 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (1 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: MASTERAUTH test with binary password (941 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1084 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (4 ms) [ok]: RENAME can unblock XREADGROUP with data (2 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (2 ms) [ok]: Regression for pattern matching very long nested loops (49 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (3 ms) [ok]: Coverage: SWAPDB and FLUSHDB (3 ms) [ok]: Test LSET with packed / plain combinations (183 ms) [ok]: Test LSET with packed is split in the middle (3 ms) [5/91 done]: unit/keyspace (2 seconds) Testing unit/other [6/91 done]: unit/auth (2 seconds) Testing unit/multi [ok]: Coverage: HELP commands (3 ms) [ok]: Coverage: MEMORY MALLOC-STATS (2 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: Test LSET with packed consist only one item (177 ms) [ok]: Crash due to delete entry from a compress quicklist node (3 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: MULTI / EXEC basics (1 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (1 ms) [ok]: MULTI where commands alter argc/argv (1 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (2 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (1 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (0 ms) [ok]: EXEC works on WATCHed key not modified (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms) [ok]: EXEC fail on lazy expired WATCHed key (102 ms) [ok]: WATCH stale keys should not fail EXEC (3 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (3 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (1 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (1 ms) [ok]: FLUSHALL does not touch non affected keys (1 ms) [ok]: FLUSHDB is able to touch the watched keys (1 ms) [ok]: FLUSHDB does not touch non affected keys (1 ms) [ok]: SWAPDB is able to touch the watched keys that exist (2 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (1 ms) [ok]: SWAPDB does not touch watched stale keys (5 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (3 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (3 ms) [ok]: WATCH is able to remember the DB a key belongs to (2 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [ok]: SAVE - make sure there are all the types as values (278 ms) [ok]: LPOS basic usage - quicklist (43 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (2 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (96 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: XCLAIM can claim PEL items from another consumer (607 ms) [ok]: RPOP/LPOP with the optional count argument - quicklist (47 ms) [ok]: LPOS basic usage - listpack (2 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (2 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (1 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (5 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (2 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (1 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (1 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (1 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (1 ms) [ok]: DEL a list (1 ms) [ok]: stats: instantaneous metrics (1604 ms) [ok]: BLPOP: single existing list - quicklist (44 ms) [ok]: stats: debug metrics (114 ms) [ok]: BLPOP: multiple existing lists - quicklist (95 ms) [ok]: stats: client input and output buffer limit disconnections (29 ms) [ok]: clients: pubsub clients (3 ms) [ok]: clients: watching clients (15 ms) [ok]: BLPOP: second list has an entry - quicklist (46 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (47 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (90 ms) [ok]: XCLAIM without JUSTID increments delivery count (404 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (49 ms) [ok]: BRPOPLPUSH - quicklist (48 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (6 ms) [ok]: Very big payload random access (2561 ms) [ok]: BLMOVE left left - quicklist (48 ms) [ok]: BLMOVE left right - quicklist (47 ms) [7/91 done]: unit/info (3 seconds) Testing unit/quit [ok]: XCLAIM same consumer (202 ms) [ok]: BLMOVE right left - quicklist (48 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2100 ms) [ok]: EXPIRE - write on expire should work (0 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (1 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (1 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (1 ms) [ok]: BLMOVE right right - quicklist (43 ms) [ok]: BLPOP: single existing list - listpack (3 ms) [ok]: BLPOP: multiple existing lists - listpack (4 ms) [ok]: BLPOP: second list has an entry - listpack (2 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (4 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (4 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (2 ms) [ok]: BRPOPLPUSH - listpack (2 ms) [ok]: FUZZ stresser with data model binary (810 ms) [ok]: BLMOVE left left - listpack (3 ms) [ok]: BLMOVE left right - listpack (3 ms) [ok]: BLMOVE right left - listpack (3 ms) [ok]: BLMOVE right right - listpack (3 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (3 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (3 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (2 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (3 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (4 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (3 ms) [ok]: BLPOP with variadic LPUSH (2 ms) [ok]: QUIT returns OK (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (2 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (2 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (2 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (2 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (3 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (3 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (3 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (3 ms) [ok]: BRPOPLPUSH with wrong source type (2 ms) [ok]: BRPOPLPUSH with wrong destination type (4 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (2 ms) [ok]: BRPOPLPUSH with multiple blocked clients (2 ms) [ok]: BLMPOP with multiple blocked clients (6 ms) [ok]: Linked LMOVEs (3 ms) [ok]: Circular BRPOPLPUSH (3 ms) [ok]: Self-referential BRPOPLPUSH (2 ms) [ok]: BRPOPLPUSH inside a transaction (1 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (2 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (2 ms) [8/91 done]: unit/quit (1 seconds) Testing unit/aofrw [ok]: WATCH will consider touched expired keys (1108 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (1 ms) [ok]: DISCARD should UNWATCH all the keys (1 ms) [ok]: MULTI / EXEC is not propagated (single write command) (38 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (100 ms) [ok]: Hash fuzzing #1 - 512 fields (2039 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (106 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (606 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (95 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (101 ms) [ok]: XAUTOCLAIM as an iterator (202 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (0 ms) [ok]: XCLAIM with XDEL (2 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XAUTOCLAIM with XDEL (2 ms) [ok]: XAUTOCLAIM with XDEL and count (2 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (2 ms) [ok]: XINFO FULL output (6 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (100 ms) [ok]: FUZZ stresser with data model alpha (803 ms) [ok]: MULTI / EXEC with REPLICAOF (101 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: Consumer seen-time and active-time (207 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (3 ms) [ok]: XGROUP CREATECONSUMER: group must exist (1 ms) [ok]: SETEX - Wait for the key to expire (1101 ms) [ok]: SETEX - Wrong time parameter (1 ms) [ok]: PERSIST can undo an EXPIRE (1 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (0 ms) [ok]: BRPOPLPUSH timeout (1016 ms) [ok]: SWAPDB awakes blocked client (3 ms) [ok]: XADD mass insertion and XLEN (3054 ms) [ok]: XADD with ID 0-0 (1 ms) [ok]: XADD with LIMIT delete entries no more than limit (1 ms) [ok]: XRANGE COUNT works as expected (0 ms) [ok]: XREVRANGE COUNT works as expected (1 ms) [ok]: XREADGROUP with NOACK creates consumer (110 ms) [ok]: MULTI and script timeout (406 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (253 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (307 ms) [ok]: FUZZ stresser with data model compr (732 ms) [ok]: Consumer group read counter and lag in empty streams (2 ms) [ok]: Consumer group read counter and lag sanity (6 ms) [ok]: Consumer group lag with XDELs (11 ms) [ok]: Loading from legacy (Redict <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redict <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: XRANGE can be used to iterate the whole stream (528 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (302 ms) [ok]: EXEC and script timeout (405 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (48 ms) [ok]: Hash fuzzing #2 - 512 fields (1387 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (302 ms) [ok]: MULTI-EXEC body and script timeout (404 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (2297 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: EXPIRE precision is now the millisecond (1104 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (106 ms) [ok]: BGSAVE (161 ms) [ok]: SELECT an out of range DB (1 ms) [ok]: PSETEX can set sub-second expires (103 ms) [ok]: Big Quicklist: SORT BY key (810 ms) [ok]: Big Quicklist: SORT BY key with limit (29 ms) [ok]: PEXPIRE can set sub-second expires (102 ms) [ok]: ZDIFF fuzzing - listpack (4974 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (2 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (1 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (2 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (3 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (1 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (1 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (1 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (1 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (1 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (1 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (1 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (2 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-elemenet pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (1 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZINCRBY against invalid incr value - skiplist (1 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (1 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (1 ms) [ok]: ZREM variadic version - skiplist (1 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (1 ms) [ok]: ZRANGE basics - skiplist (3 ms) [ok]: ZREVRANGE basics - skiplist (3 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (2 ms) [ok]: ZRANK - after deletion - skiplist (1 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (1 ms) [ok]: ZINCRBY - increment and decrement - skiplist (1 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (6 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (6 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (2 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (4 ms) [ok]: ZLEXCOUNT advanced - skiplist (2 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (7 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (1 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (11 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (1 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (6 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (107 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (17 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (1 ms) [ok]: ZUNIONSTORE with empty set - skiplist (1 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (2 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (5 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (1 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: XREADGROUP ACK would propagate entries-read (4 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (1 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: just EXEC and script timeout (406 ms) [ok]: ZINTERCARD with illegal arguments (1 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (1 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (1 ms) [ok]: exec with write commands and state change (3 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (1 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (2 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (0 ms) [ok]: ZDIFFSTORE basics - skiplist (1 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (1 ms) [ok]: exec with read commands and stale replica state change (10 ms) [ok]: ZDIFF algorithm 2 - skiplist (1 ms) [ok]: EXEC with only read commands should not be rejected when OOM (2 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (3 ms) [ok]: PEXPIREAT can set sub-second expires (203 ms) [ok]: TTL returns time to live in seconds (1 ms) [ok]: PTTL returns time to live in milliseconds (1 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (2 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (1 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (1 ms) [ok]: MULTI propagation of PUBLISH (82 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BLPOP when new key is moved into place (1 ms) [ok]: BLPOP when result key is created by SORT..STORE (1 ms) [ok]: BLMPOP_LEFT when new key is moved into place (1 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (1 ms) [ok]: BLPOP: with non-integer timeout (1 ms) [ok]: BLPOP: with zero timeout should block indefinitely (2 ms) [ok]: MULTI propagation of SCRIPT LOAD (101 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BLPOP: second argument is not a list (1 ms) [ok]: MULTI propagation of EVAL (101 ms) [ok]: MULTI propagation of SCRIPT FLUSH (102 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (241 ms) [ok]: MULTI propagation of XREADGROUP (101 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (1 ms) [9/91 done]: unit/type/stream-cgroups (5 seconds) Testing unit/acl [ok]: Connections start with the default user (0 ms) [ok]: It is possible to create new users (0 ms) [ok]: Big Quicklist: SORT BY hash field (813 ms) [ok]: Coverage: ACL USERS (1 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: New users start disabled (1 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (1 ms) [ok]: It is possible to remove passwords from the set of valid ones (1 ms) [ok]: Test password hashes can be added (0 ms) [ok]: Test password hashes validate input (1 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (1 ms) [ok]: Test hashed passwords removal (1 ms) [ok]: By default users are not able to access any command (1 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: It's possible to allow the access of a subset of keys (1 ms) [ok]: By default, only default user is able to publish to any channel (1 ms) [ok]: By default, only default user is not able to publish to any shard channel (1 ms) [ok]: By default, only default user is able to subscribe to any channel (2 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: Intset: SORT BY key (1 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Redict should actively expire keys incrementally (613 ms) [ok]: Intset: SORT BY hash field (1 ms) [ok]: By default, only default user is able to subscribe to any pattern (1 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: It's possible to allow publishing to a subset of shard channels (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (2 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (2 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (1 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (1 ms) [ok]: Subscribers are killed when revoked of channel permission (2 ms) [ok]: Subscribers are killed when revoked of channel permission (2 ms) [ok]: Subscribers are killed when revoked of pattern permission (2 ms) [ok]: Subscribers are killed when revoked of allchannels permission (2 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (3 ms) [ok]: blocked command gets rejected when reprocessed after permission change (4 ms) [ok]: Users can be configured to authenticate with any password (1 ms) [ok]: ACLs can exclude single commands (1 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: ACLs can include single subcommands (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (1 ms) [ok]: ACLs cannot exclude or include a container command with two args (0 ms) [ok]: ACLs including of a type includes also subcommands (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: ACLs can block all DEBUG subcommands except one (1 ms) [ok]: ACLs set can include subcommands, if already full command exists (2 ms) [ok]: MULTI with BGREWRITEAOF (220 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (3 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (2 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: ACL GETUSER provides reasonable results (20 ms) [ok]: ACL GETUSER provides correct results (10 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (1 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (2 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (1 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (6 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (1 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (0 ms) [ok]: ACL LOG can distinguish the transaction context (1) (1 ms) [ok]: ACL LOG can distinguish the transaction context (2) (2 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (2 ms) [ok]: ACL LOG can log failed auth attempts (1 ms) [ok]: ACLLOG - zero max length is correctly handled (3 ms) [ok]: ACL LOG entries are limited to a maximum amount (3 ms) [ok]: ACL LOG entries are still present on update of max len config (1 ms) [ok]: When default user is off, new connections are not authenticated (1 ms) [ok]: When default user has no command permission, hello command still works for other users (1 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (1 ms) [ok]: ACL HELP should not have unexpected options (0 ms) [ok]: Delete a user that the client doesn't use (1 ms) [ok]: Delete a user that the client is using (0 ms) [ok]: ACL GENPASS command failed test (1 ms) [ok]: Default user can not be removed (1 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: ACL-Metrics user AUTH failure (6 ms) [ok]: ACL-Metrics invalid command accesses (3 ms) [ok]: ACL-Metrics invalid key accesses (3 ms) [ok]: ACL-Metrics invalid channels accesses (4 ms) [ok]: Check consistency of different data types after a reload (1212 ms) [ok]: MULTI with config set appendonly (239 ms) [ok]: MULTI with config error (2 ms) [ok]: Flushall while watching several keys by one client (1 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (1681 ms) [ok]: default: load from include file, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (0 ms) [ok]: Alice: can execute all command (0 ms) [ok]: Bob: just execute @set and acl command (1 ms) [ok]: ACL LOAD only disconnects affected clients (2 ms) [ok]: ACL LOAD disconnects clients of deleted users (2 ms) [ok]: ACL load and save (22 ms) [ok]: ACL load and save with restricted channels (24 ms) [ok]: Hash ziplist of various encodings (94 ms) [ok]: Hash table: SORT BY key (18 ms) [ok]: Hash table: SORT BY key with limit (3 ms) [ok]: Hash ziplist of various encodings - sanitize dump (4 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: Hash table: SORT BY hash field (17 ms) [10/91 done]: unit/type/hash (7 seconds) Testing unit/acl-v2 [ok]: SDIFF fuzzing (5579 ms) [ok]: SDIFF against non-set should throw error (1 ms) [ok]: SDIFF should handle non existing key as empty (1 ms) [ok]: SDIFFSTORE against non-set should throw error (2 ms) [ok]: SDIFFSTORE should handle non existing key as empty (2 ms) [ok]: SINTER against non-set should throw error (1 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (2 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (2 ms) [ok]: SUNION against non-set should throw error (1 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (2 ms) [ok]: SUNIONSTORE should handle non existing key as empty (2 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (2 ms) [ok]: SPOP with =1 - listpack (1 ms) [ok]: SRANDMEMBER - listpack (13 ms) [ok]: SPOP basics - intset (1 ms) [ok]: SPOP with =1 - intset (1 ms) [ok]: SRANDMEMBER - intset (13 ms) [ok]: SPOP integer from listpack set (2 ms) [ok]: SPOP with - listpack (4 ms) [ok]: SPOP with - intset (4 ms) [ok]: SPOP with - hashtable (4 ms) [ok]: Default user has access to all channels irrespective of flag (0 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (4 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: Single channel is valid (1 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: SPOP new implementation: code path #1 intset (3 ms) [ok]: SPOP new implementation: code path #2 intset (3 ms) [ok]: SPOP new implementation: code path #3 intset (3 ms) [ok]: SPOP new implementation: code path #1 listpack (3 ms) [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (0 ms) [ok]: SPOP new implementation: code path #2 listpack (3 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (2 ms) [ok]: SPOP new implementation: code path #3 listpack (3 ms) [ok]: Test separate read permission (1 ms) [ok]: Test separate write permission (0 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: Validate read and write permissions format (1 ms) [ok]: Validate key permissions format - empty and omitted pattern (1 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (2 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (2 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (0 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: Test various odd commands for key permissions (3 ms) [ok]: Existence test commands are not marked as access (1 ms) [ok]: Intersection cardinaltiy commands are access commands (2 ms) [ok]: Test general keyspace commands require some type of permission to execute (2 ms) [ok]: Cardinality commands require some type of permission to execute (2 ms) [ok]: Test sharded channel permissions (1 ms) [ok]: Test sort with ACL permissions (2 ms) [ok]: Test DRYRUN with wrong number of arguments (1 ms) [ok]: BLPOP: timeout (1067 ms) [ok]: Same dataset digest if saving/reloading as AOF? (325 ms) [ok]: BLPOP: arguments are empty (6 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (1 ms) [ok]: BRPOP: with non-integer timeout (1 ms) [ok]: BRPOP: with zero timeout should block indefinitely (1 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BRPOP: second argument is not a list (1 ms) [ok]: MULTI with FLUSHALL and AOF (89 ms) [11/91 done]: unit/multi (5 seconds) Testing unit/latency-monitor [ok]: XREVRANGE returns the reverse of XRANGE (2282 ms) [ok]: XRANGE exclusive ranges (6 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (1 ms) [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (215 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (1 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: Test behavior of loading ACLs (1 ms) [ok]: SRANDMEMBER with - listpack (30 ms) [ok]: SRANDMEMBER with - intset (23 ms) [ok]: SRANDMEMBER with - hashtable (26 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: LATENCY HISTOGRAM all commands (1 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (2 ms) [ok]: LATENCY HISTOGRAM command (1 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (2 ms) [12/91 done]: unit/acl-v2 (0 seconds) Testing integration/block-repl [ok]: SRANDMEMBER histogram distribution - listpack (97 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (0 ms) [ok]: Redict should lazy expire keys (1003 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (450 ms) [ok]: SRANDMEMBER histogram distribution - intset (100 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (106 ms) [ok]: default: load from config file with all channels permissions (1 ms) [ok]: Test loading an ACL file with duplicate users (4 ms) [ok]: Test loading an ACL file with duplicate default user (3 ms) [ok]: Test loading duplicate users in config on startup (13 ms) [ok]: BRPOP: timeout (1070 ms) [ok]: BRPOP: arguments are empty (2 ms) [ok]: BLMPOP_LEFT: with single empty list argument (1 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (1 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: ACL from config file and config rewrite (208 ms) [13/91 done]: unit/acl (2 seconds) Testing integration/replication [ok]: EXPIRE should not resurrect keys (issue #1026) (1002 ms) [ok]: 5 keys in, 5 keys out (1 ms) [ok]: EXPIRE with empty string as TTL should report an error (1 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: SET with EX with smallest integer should report an error (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (1 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EXPIRE with big negative integer (0 ms) [ok]: PEXPIREAT with big integer works (1 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: First server should have role slave after SLAVEOF (1003 ms) [ok]: Slave enters handshake (1 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: SETNX against expired volatile key (3354 ms) [ok]: GETEX EX option (1 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (1 ms) [ok]: GETEX PERSIST option (0 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (1 ms) [ok]: XREAD with non empty second stream (1593 ms) [ok]: Blocking XREAD waiting new data (2 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: GETDEL propagate as DEL command to replica (120 ms) [ok]: Blocking XREAD will not reply with an empty array (96 ms) [ok]: GETEX without argument does not propagate to replica (100 ms) [ok]: MGET (23 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (1 ms) [ok]: MSET base case (0 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (0 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (1 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (1 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (1 ms) [ok]: SETBIT against string-encoded key (2 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: SETBIT against integer-encoded key (1 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: XREAD last element from non-empty stream (1 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: XREAD last element from empty stream (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: XREAD last element blocking from empty stream (1 ms) [ok]: XREAD last element blocking from non-empty stream (1 ms) [ok]: XREAD last element from multiple streams (1 ms) [ok]: XREAD last element with count > 1 (0 ms) [ok]: XREAD: XADD + DEL should not awake client (2 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (3 ms) [ok]: XREAD with same stream name multiple times should work (2 ms) [ok]: XREAD + multiple XADD inside transaction (3 ms) [ok]: XDEL basic test (1 ms) [ok]: XDEL multiply id test (2 ms) [ok]: BLMPOP_LEFT: timeout (1075 ms) [ok]: BLMPOP_LEFT: arguments are empty (2 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (1 ms) [ok]: BLMPOP_RIGHT: with negative timeout (1 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (1 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: SETBIT fuzzing (502 ms) [ok]: GETBIT against non-existing key (1 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (1 ms) [ok]: SETRANGE against string-encoded key (2 ms) [ok]: SETRANGE against integer-encoded key (4 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (1 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (1 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2204 ms) [ok]: BLMPOP_RIGHT: timeout (1074 ms) [ok]: BLMPOP_RIGHT: arguments are empty (5 ms) [ok]: BLPOP inside a transaction (3 ms) [ok]: BLMPOP_LEFT inside a transaction (2 ms) [ok]: BLMPOP propagate as pop with count command to replica (294 ms) [ok]: LPUSHX, RPUSHX - generic (1 ms) [ok]: LPUSHX, RPUSHX - quicklist (47 ms) [ok]: Test latency events logging (3403 ms) [ok]: LATENCY HISTORY output is ok (0 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: LATENCY GRAPH can output the event graph (0 ms) [ok]: LINSERT - quicklist (46 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (3 ms) [ok]: LINSERT raise error on bad syntax (1 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (1 ms) [ok]: GETRANGE fuzzing (1249 ms) [ok]: Coverage: SUBSTR (1 ms) [ok]: Extended SET can detect syntax errors (1 ms) [ok]: Extended SET NX option (1 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (1 ms) [ok]: Extended SET GET option with no previous value (2 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (1 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: Extended SET EX option (1 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (1 ms) [ok]: Extended SET PXAT option (0 ms) [ok]: Extended SET using multiple options at once (1 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (0 ms) [ok]: LCS basic (1 ms) [ok]: LCS len (0 ms) [ok]: LCS indexes (0 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (1 ms) [ok]: SETRANGE with huge offset (0 ms) [ok]: APPEND modifies the encoding from int to raw (1 ms) [ok]: LINDEX consistency test - listpack (109 ms) [ok]: ZDIFF fuzzing - skiplist (5090 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (2 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: Big Hash table: SORT BY key (825 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (1 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (2 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (1 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (1 ms) [14/91 done]: unit/type/string (11 seconds) Testing integration/replication-2 [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (5 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (2 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (2 ms) [ok]: Big Hash table: SORT BY key with limit (36 ms) [ok]: LINDEX random access - listpack (63 ms) [ok]: LTRIM stress testing - quicklist (10486 ms) [ok]: ZMPOP propagate as pop with count command to replica (66 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (2 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2426 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (101 ms) [ok]: {standalone} SCAN regression test for issue #4906 (9493 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (38 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (86 ms) [ok]: LINDEX consistency test - listpack (129 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (195 ms) [ok]: ZMPOP readraw in RESP3 (2 ms) [ok]: First server should have role slave after SLAVEOF (102 ms) [ok]: If min-slaves-to-write is honored, write is accepted (1 ms) [ok]: No write if min-slaves-to-write is < attached slaves (0 ms) [ok]: If min-slaves-to-write is honored, write is accepted (again) (1 ms) [ok]: LINDEX random access - listpack (93 ms) [ok]: First server should have role slave after REPLICAOF (2 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (27 ms) [ok]: PIPELINING stresser (also a regression for the old epoll bug) (1617 ms) [ok]: APPEND basics (0 ms) [ok]: APPEND basics, integer encoded values (1 ms) [ok]: BZMPOP readraw in RESP3 (198 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: XDEL fuzz test (2424 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (266 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (198 ms) [ok]: ZMPOP readraw in RESP2 (2 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (297 ms) [ok]: LINDEX consistency test - quicklist (87 ms) [ok]: APPEND fuzzing (344 ms) [ok]: LINDEX random access - quicklist (65 ms) [ok]: SET command will remove expire (1 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: Big Hash table: SORT BY hash field (813 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (0 ms) [ok]: SORT_RO GET (0 ms) [ok]: SORT GET (key and hash) with sanity check (6 ms) [ok]: SORT BY key STORE (2 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (1 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (0 ms) [ok]: SORT ALPHA against integer encoded strings (1 ms) [ok]: SORT sorted set (1 ms) [ok]: SORT sorted set BY nosort should retain ordering (1 ms) [ok]: SORT sorted set BY nosort + LIMIT (3 ms) [ok]: BZMPOP readraw in RESP2 (201 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (2 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (2 ms) [ok]: SORT sorted set: +inf and -inf handling (1 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (1 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (1 ms) [ok]: SORT regression for issue #19, sorting floats (20 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: FLUSHDB (135 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (1 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (0 ms) [ok]: SORT by nosort retains native order for lists (1 ms) [ok]: SORT by nosort plus store retains native order for lists (0 ms) [ok]: SORT by nosort with limit returns based on original list order (1 ms) [ok]: SORT_RO - Successful case (0 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (12 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (2 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (1 ms) [ok]: SORT speed, 100 element list BY key, 100 times (38 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (234 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (48 ms) [ok]: ZUNIONSTORE result is sorted (142 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (0 ms) [ok]: ZMSCORE retrieve (0 ms) [ok]: ZMSCORE retrieve from empty set (0 ms) [ok]: ZMSCORE retrieve with missing member (0 ms) [ok]: ZMSCORE retrieve single member (0 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (0 ms) [ok]: SORT speed, 100 element list directly, 100 times (25 ms) [ok]: SORT speed, 100 element list BY , 100 times (28 ms) [ok]: ZSCORE - listpack (43 ms) [ok]: SETRANGE with huge offset (4 ms) [ok]: Stress tester for #3343-alike bugs comp: 2 (10963 ms) [ok]: ZMSCORE - listpack (34 ms) [ok]: SORT STORE quicklist with the right options (70 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (86 ms) [ok]: LINDEX consistency test - quicklist (194 ms) [ok]: ZSET sorting stresser - listpack (53 ms) [ok]: LINDEX random access - quicklist (145 ms) [ok]: Don't rehash if redict has child process (435 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (286 ms) [ok]: LLEN against non-list value error (1 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (1 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (43 ms) [ok]: LMOVE left left base case - quicklist (47 ms) [ok]: Process title set as expected (2 ms) [ok]: LMOVE left right base case - quicklist (44 ms) [ok]: LMOVE right left base case - quicklist (48 ms) [ok]: LMOVE right right base case - quicklist (48 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (48 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (48 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (44 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (48 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (48 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (92 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (88 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (92 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (88 ms) [ok]: {cluster} SCAN basic (112 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (88 ms) [ok]: {cluster} SCAN COUNT (98 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (45 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (44 ms) [ok]: {cluster} SCAN MATCH (76 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (45 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (47 ms) [ok]: {cluster} SCAN TYPE (117 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (48 ms) [ok]: RPOPLPUSH base case - listpack (3 ms) [ok]: LMOVE left left base case - listpack (3 ms) [ok]: LMOVE left right base case - listpack (3 ms) [ok]: LMOVE right left base case - listpack (2 ms) [ok]: LMOVE right right base case - listpack (3 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2006 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (2 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (2 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (2 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (3 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (2 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (2 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (49 ms) [ok]: GETEX propagate as to replica as PERSIST, DEL, or nothing (59 ms) [ok]: EXPIRE with NX option on a key with ttl (0 ms) [ok]: EXPIRE with NX option on a key without ttl (1 ms) [ok]: EXPIRE with XX option on a key with ttl (0 ms) [ok]: {cluster} SCAN unknown type (83 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (1 ms) [ok]: EXPIRE with GT option on a key with higher ttl (0 ms) [ok]: EXPIRE with GT option on a key without ttl (0 ms) [ok]: EXPIRE with LT option on a key with higher ttl (1 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (1 ms) [ok]: EXPIRE with conflicting options: NX GT (0 ms) [ok]: EXPIRE with conflicting options: NX LT (1 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (1 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (46 ms) [ok]: LMOVE left right with listpack source and existing target quicklist (47 ms) [ok]: {cluster} SCAN with expired keys (90 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (43 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (48 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (90 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (3 ms) [ok]: {cluster} SSCAN with encoding intset (2 ms) [ok]: LMOVE left left with listpack source and existing target listpack (3 ms) [ok]: {cluster} SSCAN with encoding listpack (2 ms) [ok]: LMOVE left right with listpack source and existing target listpack (2 ms) [ok]: LMOVE right left with listpack source and existing target listpack (2 ms) [ok]: {cluster} SSCAN with encoding hashtable (5 ms) [ok]: LMOVE right right with listpack source and existing target listpack (2 ms) [ok]: RPOPLPUSH against non existing key (1 ms) [ok]: {cluster} HSCAN with encoding listpack (2 ms) [ok]: RPOPLPUSH against non list src key (1 ms) [ok]: Redict should not propagate the read command on lazy expire (189 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (45 ms) [ok]: RPOPLPUSH against non list dst key - listpack (1 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: {cluster} HSCAN with encoding hashtable (92 ms) [ok]: {cluster} ZSCAN with encoding listpack (2 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: No write if min-slaves-max-lag is > of the slave lag (2823 ms) [ok]: min-slaves-to-write is ignored by slaves (1 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (93 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (3 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (3 ms) [ok]: {cluster} ZSCAN with encoding skiplist (87 ms) [ok]: {cluster} SCAN guarantees check under write load (27 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (0 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: {cluster} HSCAN with NOVALUES (1 ms) [ok]: {cluster} ZSCAN with PATTERN (0 ms) [ok]: Mass RPOP/LPOP - listpack (65 ms) [ok]: sort by in cluster mode (1 ms) [ok]: sort get in cluster mode (0 ms) [ok]: sort_ro by in cluster mode (1 ms) [ok]: sort_ro get in cluster mode (0 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (114 ms) [ok]: Mass RPOP/LPOP - listpack (112 ms) [ok]: LMPOP with illegal argument (2 ms) [15/91 done]: unit/sort (13 seconds) Testing integration/replication-3 [ok]: LMPOP single existing list - quicklist (140 ms) [ok]: LMPOP multiple existing lists - quicklist (183 ms) [ok]: LMPOP single existing list - listpack (6 ms) [ok]: LMPOP multiple existing lists - listpack (6 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: LMPOP propagate as pop with count command to replica (76 ms) [ok]: LRANGE basics - quicklist (44 ms) [ok]: LRANGE inverted indexes - quicklist (47 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (43 ms) [ok]: LRANGE out of range negative end index - quicklist (45 ms) [ok]: LRANGE basics - listpack (4 ms) [ok]: LRANGE inverted indexes - listpack (3 ms) [ok]: LRANGE out of range indexes including the full list - listpack (2 ms) [ok]: LRANGE out of range negative end index - listpack (3 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (2 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (3232 ms) [ok]: LTRIM basics - quicklist (537 ms) [ok]: LTRIM out of range negative end index - quicklist (98 ms) [ok]: LSET - quicklist (49 ms) [ok]: LSET out of range index - quicklist (1 ms) [ok]: LTRIM basics - listpack (18 ms) [ok]: LTRIM out of range negative end index - listpack (3 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (47 ms) [ok]: LREM remove the first occurrence - quicklist (1 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (287 ms) [ok]: LREM starting from tail with negative count - quicklist (46 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (1 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (49 ms) [ok]: LREM remove all the occurrences - listpack (2 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (1 ms) [ok]: LREM starting from tail with negative count - listpack (2 ms) [ok]: LREM starting from tail with negative count (2) - listpack (1 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (4 ms) [ok]: BLPOP/BLMOVE should increase dirty (5 ms) [ok]: client unblock tests (7 ms) [ok]: client unblock tests (5 ms) [ok]: MIGRATE cached connections are released after some time (15003 ms) [ok]: List listpack -> quicklist encoding conversion (10 ms) [ok]: List listpack -> quicklist encoding conversion (180 ms) [ok]: MIGRATE is able to migrate a key between two instances (224 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (412 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (42 ms) [ok]: List quicklist -> listpack encoding conversion (243 ms) [ok]: MIGRATE is able to copy a key between two instances (224 ms) [ok]: List encoding conversion when RDB loading (58 ms) [ok]: List invalid list-max-listpack-size config (90 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (225 ms) [ok]: List of various encodings (98 ms) [ok]: List of various encodings - sanitize dump (5 ms) [ok]: Unblock fairness is kept while pipelining (4 ms) [ok]: Unblock fairness is kept during nested unblock (7 ms) [ok]: Blocking command accounted only once in commandstats (5 ms) [ok]: Blocking command accounted only once in commandstats after timeout (3 ms) [ok]: Redict can trigger resizing (1755 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (129 ms) [ok]: MIGRATE propagates TTL correctly (224 ms) [16/91 done]: unit/type/list (17 seconds) Testing integration/replication-4 [ok]: First server should have role slave after SLAVEOF (2 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (1062 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: Redict can rewind and trigger smaller slot resizing (677 ms) [ok]: Redict can resize empty dict (21 ms) [17/91 done]: unit/other (16 seconds) Testing integration/replication-psync [ok]: expire scan should skip dictionaries with lot's of empty buckets (1245 ms) [18/91 done]: unit/expire (17 seconds) Testing integration/replication-buffer [ok]: Slave should be able to synchronize with the master (106 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1006 ms) [ok]: BZPOPMIN with same key multiple times should work (3 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (2 ms) [ok]: BZPOPMIN with variadic ZADD (2 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (7577 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (1 ms) [ok]: LATENCY DOCTOR produces some output (0 ms) [ok]: LATENCY RESET is able to reset events (0 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [19/91 done]: unit/latency-monitor (12 seconds) Testing integration/shutdown [ok]: Slave is able to detect timeout during handshake (0 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, disabled, reconnect: 0) (85 ms) [ok]: Set instance A as slave of B (127 ms) [ok]: INCRBYFLOAT replication, should not remove expire (2 ms) [ok]: GETSET replication (2 ms) [ok]: BRPOPLPUSH replication, when blocking against empty list (2 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1003 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (2 ms) [ok]: BZMPOP_MIN with variadic ZADD (2 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [ok]: MASTER and SLAVE consistency with expire (5074 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (88 ms) [ok]: All replicas share one global replication buffer (93 ms) [ok]: XRANGE fuzzing (8695 ms) [ok]: Replication buffer will become smaller when no replica uses (5 ms) [ok]: XREVRANGE regression test for issue #5006 (3 ms) [ok]: XREAD streamID edge (no-blocking) (1 ms) [ok]: XREAD streamID edge (blocking) (3 ms) [ok]: XADD streamID edge (1 ms) [ok]: BRPOPLPUSH replication, list exists (1004 ms) [ok]: BLMOVE (left, left) replication, when blocking against empty list (3 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1003 ms) [ok]: ZSCORE - skiplist (24 ms) [ok]: ZMSCORE - skiplist (24 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (50 ms) [ok]: ZSET sorting stresser - skiplist (33 ms) [ok]: XTRIM with MAXLEN option basic test (185 ms) [ok]: XADD with LIMIT consecutive calls (14 ms) [ok]: XTRIM with ~ is limited (13 ms) [ok]: XTRIM without ~ is not limited (18 ms) [ok]: XTRIM without ~ and with LIMIT (19 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (1 ms) [ok]: LTRIM stress testing - listpack (9524 ms) [20/91 done]: unit/type/list-2 (21 seconds) Testing integration/aof [ok]: Detect write load to master (1001 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (2141 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (1 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (24 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (2 ms) [ok]: Append a new command after loading an incomplete AOF (1 ms) [ok]: XADD with MINID > lastid can propagate correctly (18 ms) [ok]: SRANDMEMBER with a dict containing long chain (13397 ms) [ok]: SMOVE basics - from regular set to intset (4 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (2 ms) [ok]: SMOVE non existing src set (1 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (2 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (1 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (3 ms) [ok]: Short read + command: Server should start (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (30 ms) [ok]: BLMOVE (left, left) replication, list exists (1003 ms) [ok]: BLMOVE (left, right) replication, when blocking against empty list (4 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (21 ms) [ok]: Bad format: Server should have logged an error (1 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (17778 ms) [ok]: Unfinished MULTI: Server should have logged an error (2 ms) [ok]: XADD with ~ MINID can propagate correctly (27 ms) [ok]: Short read: Server should have logged an error (1 ms) [ok]: Short read: Utility should confirm the AOF is not valid (8 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (7 ms) [ok]: Short read: Utility should be able to fix the AOF (7 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (9651 ms) [ok]: Fixed AOF: Server should have been started (1 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (1 ms) [ok]: XADD with ~ MINID and LIMIT can propagate correctly (29 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (40 ms) [ok]: AOF+SPOP: Server should have been started (1 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (1 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (1 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negstive offset (0 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (1 ms) [ok]: XSETID cannot set the offset to less than the length (1 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (1 ms) [ok]: BLMOVE (left, right) replication, list exists (1005 ms) [ok]: BLMOVE (right, left) replication, when blocking against empty list (4 ms) [ok]: Test replication with parallel clients writing in different DBs (5300 ms) [ok]: AOF+EXPIRE: Server should have been started (1 ms) [ok]: AOF+EXPIRE: List should be empty (0 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (2 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (4 ms) [ok]: Maximum XDEL ID behaves correctly (2 ms) [ok]: XADD with artial ID with maximal seq (1 ms) [ok]: Shutting down master waits for replica to catch up (shutdown) (1986 ms) [ok]: Redict should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (2 ms) [ok]: With min-slaves-to-write function without no-write flag (1 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: Replication backlog size can outgrow the backlog limit config (1275 ms) [ok]: Empty stream can be rewrite into AOF correctly (227 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (218 ms) [ok]: BLMOVE (right, left) replication, list exists (1006 ms) [ok]: BLMOVE (right, right) replication, when blocking against empty list (5 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (9166 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (2935 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (1 ms) [21/91 done]: integration/replication-2 (12 seconds) Testing integration/aof-race [22/91 done]: unit/type/stream (23 seconds) Testing integration/aof-multi-part [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (232 ms) [ok]: Multi Part AOF can't load data when some file missing (121 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (129 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (126 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (356 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (36 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (120 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (124 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (124 ms) [ok]: BLMOVE (right, right) replication, list exists (1006 ms) [ok]: intsets implementation stress testing (3228 ms) [23/91 done]: unit/type/set (24 seconds) Testing integration/rdb [24/91 done]: integration/aof-race (1 seconds) Testing integration/corrupt-dump [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (128 ms) [ok]: BLPOP followed by role change, issue #2473 (207 ms) [ok]: test old version rdb file (1 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (124 ms) [ok]: corrupt payload: #7445 - with sanitize (222 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (123 ms) [ok]: Shutting down master waits for replica timeout (2105 ms) [ok]: RDB encoding loading test (13 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (139 ms) [ok]: Second server should have role master at first (1 ms) [ok]: SLAVEOF should start with link status "down" (1 ms) [ok]: The role should immediately be changed to "replica" (1 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (234 ms) [ok]: {cluster} SCAN regression test for issue #4906 (10507 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (48 ms) [25/91 done]: unit/scan (25 seconds) Testing integration/corrupt-dump-fuzzer [ok]: Sync should have transferred keys from master (0 ms) [ok]: The link status should be up (1 ms) [ok]: SET on the master should immediately propagate (1 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization (2113 ms) [ok]: corrupt payload: invalid zlbytes header (223 ms) [ok]: Multi Part AOF can start when no aof and no manifest (321 ms) [ok]: FLUSHDB / FLUSHALL should replicate (193 ms) [ok]: ROLE in master reports master with a slave (1 ms) [ok]: ROLE in slave reports slave in connected state (1 ms) [ok]: corrupt payload: valid zipped hash header, dup records (227 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (1358 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (247 ms) [ok]: Server started empty with empty RDB file (0 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (104 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (2 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica (475 ms) [ok]: corrupt payload: quicklist big ziplist prev len (226 ms) [ok]: With min-slaves-to-write: master not writable with lagged slave (2735 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (284 ms) [ok]: corrupt payload: quicklist small ziplist prev len (230 ms) [ok]: Test RDB stream encoding (243 ms) [ok]: Test RDB stream encoding - sanitize dump (36 ms) [ok]: Slave is able to evict keys created in writable slaves (6004 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (302 ms) [ok]: corrupt payload: quicklist ziplist wrong count (228 ms) [ok]: Writable replica doesn't return expired keys (105 ms) [ok]: PFCOUNT updates cache on readonly replica (1 ms) [ok]: Server should not start if RDB file can't be open (2 ms) [ok]: Shutting down master waits for replica then fails (1315 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (104 ms) [ok]: First server should have role slave after SLAVEOF (128 ms) [ok]: Server should not start if RDB is corrupted (3 ms) [ok]: corrupt payload: #3080 - quicklist (238 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (285 ms) [ok]: corrupt payload: quicklist with empty ziplist (227 ms) [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1006 ms) [ok]: BZPOPMIN with same key multiple times should work (4 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (3 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [26/91 done]: integration/replication-3 (13 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: Shutting down master waits for replica then aborted (531 ms) [27/91 done]: integration/shutdown (8 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: Replication of an expired key does not delete the expired key (524 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (228 ms) [ok]: RDB load zipmap hash: converts to listpack (1 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: Multi Part AOF can load data from old version redict (rdb preamble no) (552 ms) [ok]: Test FLUSHALL aborts bgsave (483 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (231 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, reconnect: 1) (6392 ms) [ok]: bgsave resets the change counter (204 ms) [ok]: First server should have role slave after SLAVEOF (1 ms) [28/91 done]: integration/convert-ziplist-hash-on-load (0 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: corrupt payload: #3080 - ziplist (229 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (1 ms) [ok]: RDB load ziplist zset: converts to listpack when RDB loading (1 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (116 ms) [29/91 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/logging [ok]: Multi Part AOF can load data from old version redict (rdb preamble yes) (500 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (1 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (2 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (230 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (205 ms) [ok]: Crash report generated on SIGABRT (106 ms) [30/91 done]: integration/convert-ziplist-zset-on-load (1 seconds) Testing integration/psync2 [ok]: Slave should be able to synchronize with the master (103 ms) [ok]: Crash report generated on DEBUG SEGFAULT (4 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (224 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (310 ms) [ok]: Stacktraces generated on SIGALRM (105 ms) [ok]: corrupt payload: listpack invalid size header (229 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (133 ms) [31/91 done]: integration/logging (1 seconds) Testing integration/psync2-reg [ok]: corrupt payload: listpack too long entry len (133 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (1 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: corrupt payload: listpack very long entry len (137 ms) [ok]: corrupt payload: listpack too long entry prev len (262 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1004 ms) [ok]: BZPOP/BZMPOP against wrong type (6 ms) [ok]: BZMPOP with illegal argument (6 ms) [ok]: BZMPOP with multiple blocked clients (26 ms) [ok]: Detect write load to master (1002 ms) [ok]: corrupt payload: stream with duplicate consumers (236 ms) Waiting for process 4665 to exit... [ok]: PSYNC2 #3899 regression: setup (436 ms) [ok]: corrupt payload: hash ziplist with duplicate records (230 ms) [ok]: BZMPOP propagate as pop with count command to replica (453 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (3 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size (3248 ms) [ok]: client freed during loading (1978 ms) [ok]: corrupt payload: hash listpack with duplicate records (233 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: corrupt payload: hash listpack with duplicate records - convert (140 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict1) (329 ms) [ok]: PSYNC2 #3899 regression: kill first replica (2 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (2 ms) [ok]: corrupt payload: hash ziplist uneven record count (227 ms) [ok]: MIGRATE can correctly transfer large values (12868 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (redict2) (278 ms) [ok]: corrupt payload: hash duplicate records (229 ms) [ok]: MIGRATE can correctly transfer hashes (236 ms) [ok]: AOF fsync always barrier issue (6961 ms) [ok]: Multi Part AOF can upgrade when when two redict share the same server dir (1990 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (8258 ms) [ok]: corrupt payload: hash empty zipmap (227 ms) [ok]: corrupt payload: fuzzer findings - NPD in streamIteratorGetID (130 ms) [ok]: GETEX should not append to AOF (2 ms) [ok]: PSYNC2: Set #2 to replicate from #4 (0 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending (1238 ms) [32/91 done]: integration/replication-buffer (12 seconds) Testing integration/psync2-pingoff [ok]: corrupt payload: fuzzer findings - listpack NPD on invalid stream (131 ms) [ok]: Test RDB load info (1118 ms) [ok]: Unknown command: Server should have logged an error (2 ms) [ok]: ZSET skiplist order consistency when elements are moved (1443 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (1 ms) [ok]: ZRANGESTORE range (1 ms) [ok]: ZRANGESTORE BYLEX (1 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (499 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (1 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (1 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (1 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (1 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (2 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (1 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: ZRANDMEMBER - listpack (12 ms) [ok]: ZRANDMEMBER - skiplist (12 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (1 ms) [ok]: corrupt payload: fuzzer findings - NPD in quicklistIndex (230 ms) [ok]: MIGRATE timeout actually works (646 ms) [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: AOF+LMPOP/BLMPOP: pop elements from the list (102 ms) [ok]: Multi Part AOF can create BASE (RDB format) when redict starts from empty (260 ms) [ok]: corrupt payload: fuzzer findings - encoded entry header reach outside the allocation (224 ms) [ok]: MIGRATE can migrate multiple keys at once (225 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: AOF+LMPOP/BLMPOP: after pop elements from the list (1 ms) [ok]: ZRANDMEMBER with - skiplist (427 ms) [ok]: Multi Part AOF can create BASE (AOF format) when redict starts from empty (222 ms) [ok]: corrupt payload: fuzzer findings - invalid ziplist encoding (221 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (224 ms) [ok]: failed bgsave prevents writes (239 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [33/91 done]: integration/rdb (7 seconds) Testing integration/psync2-master-restart [ok]: corrupt payload: fuzzer findings - hash crash (232 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (223 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (1 ms) [ok]: AOF+ZMPOP/BZMPOP: pop elements from the zset (104 ms) [ok]: ZRANDMEMBER with - listpack (390 ms) [ok]: zset score double range (1 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (35 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (12 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (2 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (2 ms) [ok]: corrupt payload: fuzzer findings - uneven entry count in hash (230 ms) [34/91 done]: unit/type/zset (31 seconds) Testing integration/failover [ok]: MIGRATE with multiple keys: delete just ack keys (230 ms) [ok]: AOF+ZMPOP/BZMPOP: after pop elements from the zset (1 ms) [ok]: PSYNC2 pingoff: setup (1005 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: corrupt payload: fuzzer findings - invalid read in lzf_decompress (231 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (221 ms) [35/91 done]: unit/dump (32 seconds) Testing integration/redict-cli [ok]: failover command fails without connected replica (0 ms) [ok]: corrupt payload: fuzzer findings - leak in rdbloading due to dup entry in set (230 ms) [ok]: Interactive CLI: INFO response should be printed raw (64 ms) [ok]: Interactive CLI: Status reply (60 ms) [ok]: Interactive CLI: Integer reply (60 ms) [ok]: setup replication for following tests (285 ms) [ok]: failover command fails with invalid host (1 ms) [ok]: failover command fails with invalid port (3 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (1 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: corrupt payload: fuzzer findings - empty intset (228 ms) [ok]: Interactive CLI: Bulk reply (61 ms) [ok]: Interactive CLI: Multi-bulk reply (62 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist entry lensize is 0 (228 ms) [ok]: AOF enable will create manifest file (1280 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields when offset is 0 (172 ms) [ok]: Generate timestamp annotations in AOF (884 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prevlen reaches outside the ziplist (234 ms) [ok]: Successfully load AOF which has timestamp annotations inside (1 ms) [ok]: Interactive CLI: Parsing quotes (433 ms) [ok]: corrupt payload: fuzzer findings - valgrind - bad rdbLoadDoubleValue (231 ms) [ok]: failover command to specific replica works (793 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - valgrind ziplist prev too big (232 ms) [ok]: Interactive CLI: Subscribed mode (618 ms) [ok]: corrupt payload: fuzzer findings - lzf decompression fails, avoid valgrind invalid read (228 ms) [ok]: Truncate AOF to specific timestamp (731 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count (225 ms) [ok]: corrupt payload: fuzzer findings - stream bad lp_count - unsanitized (135 ms) [ok]: Interactive non-TTY CLI: Subscribed mode (418 ms) [ok]: Non-interactive TTY CLI: Status reply (4 ms) [ok]: Non-interactive TTY CLI: Integer reply (3 ms) [ok]: Non-interactive TTY CLI: Bulk reply (3 ms) [ok]: Non-interactive TTY CLI: Multi-bulk reply (3 ms) [ok]: Non-interactive TTY CLI: Read last argument from pipe (8 ms) [ok]: Non-interactive TTY CLI: Read last argument from file (6 ms) [ok]: Non-interactive TTY CLI: Escape character in JSON mode (21 ms) [ok]: Non-interactive non-TTY CLI: Status reply (3 ms) [ok]: Non-interactive non-TTY CLI: Integer reply (3 ms) [ok]: Non-interactive non-TTY CLI: Bulk reply (3 ms) [ok]: Test replication with blocking lists and sorted sets operations (25008 ms) [ok]: Non-interactive non-TTY CLI: Multi-bulk reply (3 ms) [ok]: failover command to any replica works (847 ms) [ok]: Non-interactive non-TTY CLI: ASK redirect test (56 ms) [ok]: Non-interactive non-TTY CLI: Quoted input arguments (4 ms) [ok]: Non-interactive non-TTY CLI: No accidental unquoting of input arguments (5 ms) [ok]: Non-interactive non-TTY CLI: Invalid quoted input arguments (4 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from pipe (7 ms) [ok]: Non-interactive non-TTY CLI: Read last argument from file (5 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - latest server (30 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - no server (5 ms) [ok]: corrupt payload: fuzzer findings - stream integrity check issue (221 ms) [ok]: Non-interactive non-TTY CLI: Test command-line hinting - old server (18 ms) [36/91 done]: integration/block-repl (27 seconds) Testing integration/redict-benchmark [ok]: corrupt payload: fuzzer findings - infinite loop (134 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: benchmark: set,get (7 ms) [ok]: benchmark: connecting using URI set,get (6 ms) [ok]: benchmark: connecting using URI with authentication set,get (5 ms) [ok]: benchmark: full test suite (131 ms) [ok]: failover to a replica with force works (443 ms) [ok]: corrupt payload: fuzzer findings - hash ziplist too long entry len (232 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: corrupt payload: fuzzer findings - zset ziplist invalid tail offset (225 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with data (1209 ms) [ok]: corrupt payload: fuzzer findings - negative reply length (139 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9623 ms) [ok]: benchmark: multi-thread set,get (510 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (2300 ms) [ok]: failover with timeout aborts if replica never catches up (561 ms) [ok]: failovers can be aborted (33 ms) [ok]: corrupt payload: fuzzer findings - valgrind negative malloc (223 ms) [ok]: benchmark: pipelined full set,get (184 ms) [ok]: benchmark: arbitrary command (7 ms) [ok]: benchmark: keyspace length (66 ms) [ok]: benchmark: clients idle mode should return error when reached maxclients limit (4 ms) [ok]: benchmark: read last argument from stdin (8 ms) [37/91 done]: integration/redict-benchmark (1 seconds) Testing integration/dismiss-mem [ok]: corrupt payload: fuzzer findings - valgrind invalid read (232 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: corrupt payload: fuzzer findings - empty hash ziplist (229 ms) [ok]: failover aborts if target rejects sync request (542 ms) [ok]: corrupt payload: fuzzer findings - stream with no records (134 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: corrupt payload: fuzzer findings - quicklist ziplist tail followed by extra data which start with 0xff (221 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (1029 ms) [ok]: EVAL timeout with slow verbatim Lua script from AOF (2412 ms) [ok]: corrupt payload: fuzzer findings - dict init to huge size (232 ms) [ok]: AOF enable/disable auto gc (332 ms) [ok]: EVAL can process writes from AOF in read-only replicas (236 ms) [ok]: Test redict-check-aof for old style resp AOF (8 ms) [ok]: corrupt payload: fuzzer findings - huge string (229 ms) [ok]: Test redict-check-aof for old style resp AOF - has data in the same format as manifest (7 ms) [ok]: Test redict-check-aof for old style rdb-preamble AOF (8 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Test redict-check-aof for Multi Part AOF with resp AOF base (7 ms) [ok]: Test redict-check-aof for Multi Part AOF with rdb-preamble AOF base (11 ms) [ok]: Test redict-check-aof for Multi Part AOF contains a format error (7 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in fix mode (13 ms) [ok]: Test redict-check-aof only truncates the last file for Multi Part AOF in truncate-to-timestamp mode (7 ms) [ok]: AOF can produce consecutive sequence number after reload (284 ms) [ok]: corrupt payload: fuzzer findings - stream PEL without consumer (225 ms) [38/91 done]: integration/failover (5 seconds) Testing unit/pubsub [ok]: corrupt payload: fuzzer findings - stream listpack valgrind issue (131 ms) [ok]: dismiss all data types memory (1312 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5002 ms) [ok]: Pub/Sub PING on RESP2 (1 ms) [ok]: PSYNC2: Partial resync after Master restart using RDB aux fields with expire (2094 ms) [ok]: Pub/Sub PING on RESP3 (1 ms) [ok]: PUBLISH/SUBSCRIBE basics (2 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBLISH/PSUBSCRIBE basics (2 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, reconnect: 1) (7999 ms) [ok]: corrupt payload: fuzzer findings - stream with bad lpFirst (221 ms) [ok]: PubSub messages with CLIENT REPLY OFF (97 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (2 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (1 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (1 ms) [ok]: Keyspace notifications: we receive keyspace notifications (42 ms) [ok]: FLUSHDB / FLUSHALL should persist in AOF (502 ms) [ok]: Keyspace notifications: we receive keyevent notifications (44 ms) [ok]: Keyspace notifications: we can receive both kind of events (2 ms) [ok]: Keyspace notifications: we are able to mask events (2 ms) [ok]: Keyspace notifications: general events test (2 ms) [ok]: Keyspace notifications: list events test (3 ms) [ok]: Keyspace notifications: set events test (2 ms) [ok]: Keyspace notifications: zset events test (3 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: corrupt payload: fuzzer findings - stream listpack lpPrev valgrind issue (131 ms) [ok]: Keyspace notifications: stream events test (4 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [39/91 done]: integration/aof (16 seconds) Testing unit/pubsubshard [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (563 ms) [ok]: Keyspace notifications: expired events (triggered expire) (102 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (1 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (2 ms) [ok]: corrupt payload: fuzzer findings - stream with non-integer entry id (225 ms) [ok]: Keyspace notifications: expired events (background expire) (140 ms) [ok]: Keyspace notifications: evicted events (2 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (1 ms) [ok]: Keyspace notifications: new key test (2 ms) [ok]: publish to self inside multi (2 ms) [ok]: publish to self inside script (1 ms) [ok]: unsubscribe inside multi, and publish to self (2 ms) [ok]: dismiss client output buffer (623 ms) [ok]: PubSubShard with CLIENT REPLY OFF (95 ms) [40/91 done]: unit/pubsub (1 seconds) Testing unit/slowlog [ok]: corrupt payload: fuzzer findings - empty quicklist (221 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 29383) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: Slave should be able to synchronize with the master (219 ms) [ok]: Detect write load to master (0 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: dismiss client query buffer (204 ms) [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: corrupt payload: fuzzer findings - empty zset (228 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (201 ms) [ok]: SLOWLOG - zero max length is correctly handled (8 ms) [ok]: SLOWLOG - max entries is correctly handled (11 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (2 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: Dumping an RDB - functions only: no (3660 ms) [ok]: Make the old master a replica of the new one and check conditions (1007 ms) [ok]: setup replication for following tests (104 ms) [ok]: publish message to master and receive on replica (1 ms) [ok]: corrupt payload: fuzzer findings - hash with len of 0 (225 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (3 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (2 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (6 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: AOF will trigger limit when AOFRW fails many times (936 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (202 ms) [ok]: corrupt payload: fuzzer findings - hash listpack first element too long entry len (225 ms) [ok]: SLOWLOG - can clean older entries (203 ms) [ok]: corrupt payload: fuzzer findings - stream double free listpack when insert dup node to rax returns 0 (222 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [41/91 done]: unit/pubsubshard (1 seconds) Testing unit/scripting [ok]: corrupt payload: fuzzer findings - LCS OOM (226 ms) [ok]: Redis compatibility global exists (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (1 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redict API? (1 ms) [ok]: EVAL - Redict integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redict integer conversion (1 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (1 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (1 ms) [ok]: corrupt payload: fuzzer findings - gcc asan reports false leak on assert (139 ms) [ok]: SLOWLOG - can be disabled (402 ms) [ok]: SLOWLOG - count must be >= -1 (1 ms) [ok]: SLOWLOG - get all slow logs (2 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (3 ms) [ok]: PSYNC2: Full resync after Master restart when too many key expired (1987 ms) [ok]: dismiss replication backlog (1337 ms) [42/91 done]: unit/slowlog (2 seconds) Testing unit/functions [ok]: corrupt payload: fuzzer findings - lpFind invalid access (134 ms) [ok]: Dumping an RDB - functions only: yes (1116 ms) [43/91 done]: integration/dismiss-mem (4 seconds) Testing unit/maxmemory [ok]: Scan mode (80 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (252 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (4 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (2 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: redict.sha1hex() implementation (1 ms) [ok]: FUNCTION - Basic usage (0 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (0 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (1 ms) [ok]: FUNCTION - Test uncompiled script (0 ms) [ok]: FUNCTION - test replace argument (2 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (1 ms) [ok]: FUNCTION - test function delete (1 ms) [ok]: FUNCTION - test fcall bad arguments (1 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [44/91 done]: integration/psync2-master-restart (8 seconds) Testing unit/introspection [ok]: FUNCTION - test fcall negative number of keys (1 ms) [ok]: FUNCTION - test delete on not exiting library (0 ms) [ok]: FUNCTION - test function kill when function is not running (1 ms) [ok]: FUNCTION - test wrong subcommand (1 ms) [ok]: FUNCTION - test loading from rdb (83 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: false (85 ms) [ok]: corrupt payload: fuzzer findings - invalid access in ziplist tail prevlen decoding (228 ms) [ok]: PING (1 ms) [ok]: CLIENT LIST (0 ms) [ok]: CLIENT LIST with IDs (1 ms) [ok]: CLIENT INFO (0 ms) [ok]: CLIENT KILL with illegal arguments (2 ms) [ok]: FUNCTION - test debug reload different options (66 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (54 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (3 ms) [ok]: FUNCTION - test function dump and restore (2 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: FUNCTION - test function dump and restore with append argument (2 ms) [ok]: FUNCTION - test function dump and restore with replace argument (3 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: FUNCTION - test fcall_ro with read only commands (1 ms) [ok]: FUNCTION - test keys and argv (1 ms) [ok]: FUNCTION - test command get keys on fcall (1 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: corrupt payload: fuzzer findings - zset zslInsert with a NAN score (224 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: PSYNC2: Set #1 to replicate from #4 (1 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (1 ms) [ok]: corrupt payload: fuzzer findings - streamLastValidID panic (222 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (470 ms) [ok]: FUNCTION - test function kill (405 ms) [ok]: corrupt payload: fuzzer findings - valgrind fishy value warning (224 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (2 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (4 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (1 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Test an example script DECR_IF_GT (3 ms) [ok]: corrupt payload: fuzzer findings - empty set listpack (226 ms) [ok]: FUNCTION - test script kill not working on function (408 ms) [ok]: ziplist implementation: value encoding and backlink (9884 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (228 ms) [45/91 done]: integration/corrupt-dump (16 seconds) Testing unit/introspection-2 [ok]: The microsecond part of the TIME command will not overflow (0 ms) [ok]: FUNCTION - test function kill not working on eval (403 ms) [ok]: FUNCTION - test function flush (3 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: PSYNC2: cluster is consistent after failover (2 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (981 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (88 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: FUNCTION - creation is replicated to replica (1 ms) [ok]: FUNCTION - call on replica (1 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (1 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: Disconnecting the replica from master instance (103 ms) [ok]: FUNCTION - test replication to replica on rdb phase (1 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (1 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (1 ms) [ok]: FUNCTION - modify key space of read only replica (1 ms) [ok]: Connecting as a replica (2118 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (467 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2003 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (5 ms) [ok]: CLIENT command unhappy path coverage (4 ms) [ok]: EVAL does not leak in the Lua stack (1180 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redict namespace are able to report errors (1 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (3 ms) [ok]: CLIENT KILL close the client connection during bgsave (101 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (47 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (43 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (43 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (1 ms) [ok]: MONITOR supports redacting command arguments (3 ms) [ok]: MONITOR correctly handles multi-exec cases (2 ms) [ok]: Script return recursive object (207 ms) [ok]: MONITOR log blocked command only once (4 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT GETNAME check if name set correctly (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (1 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (1 ms) [ok]: After CLIENT SETNAME, connection can still be closed (1 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (1 ms) [ok]: RESET does NOT clean library name (1 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: Script check unpack with massive arguments (66 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (4 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (1 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (1 ms) [ok]: Test print are not available (1 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (356 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Without maxmemory small integers are shared (1 ms) [ok]: With maxmemory and non-LRU policy integers are still shared (1 ms) [ok]: With maxmemory and LRU policy integers are not shared (1 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (3554 ms) [46/91 done]: integration/aof-multi-part (18 seconds) Testing unit/limits [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (406 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (395 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (367 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (3539 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (114 ms) [ok]: LIBRARIES - test shared function can access default globals (0 ms) [ok]: LIBRARIES - usage and code sharing (2 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (0 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (1 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (1 ms) [ok]: LIBRARIES - test registration with wrong name format (0 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (1 ms) [ok]: LIBRARIES - redict.call from function load (0 ms) [ok]: LIBRARIES - redict.setresp from function load (0 ms) [ok]: LIBRARIES - redict.set_repl from function load (1 ms) [ok]: LIBRARIES - redict.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (2 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (1 ms) [ok]: LIBRARIES - register library with no functions (1 ms) [ok]: Timedout script does not cause a false dead client (90 ms) [ok]: Timedout script link is still usable after Lua returns (149 ms) [ok]: CONFIG save params special case handled properly (1017 ms) [ok]: CONFIG sanity (35 ms) [ok]: CONFIG REWRITE sanity (246 ms) [ok]: LIBRARIES - load timeout (502 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (1 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (1 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (1 ms) [ok]: Piping raw protocol (1646 ms) [ok]: FUNCTION - test function restore with function name collision (3 ms) [ok]: FUNCTION - test function list with code (1 ms) [ok]: FUNCTION - test function list with pattern (0 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (1 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (1 ms) [ok]: Options -X with illegal argument (10 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (678 ms) [ok]: DUMP RESTORE with -x option (16 ms) [ok]: DUMP RESTORE with -X option (15 ms) [47/91 done]: integration/redict-cli (11 seconds) Testing unit/obuf-limits [ok]: Check if maxclients works refusing connections (914 ms) [ok]: CONFIG SET client-output-buffer-limit (2 ms) [ok]: FUNCTION - wrong flags type named arguments (0 ms) [ok]: FUNCTION - wrong flag type (1 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (1 ms) [ok]: FUNCTION - deny oom (2 ms) [ok]: FUNCTION - deny oom on no-writes function (1 ms) [ok]: FUNCTION - allow stale (4 ms) [ok]: FUNCTION - redict version api (1 ms) [ok]: FUNCTION - legacy redis version is hard-coded to 7.2.4 (1 ms) [ok]: FUNCTION - function stats (1 ms) [48/91 done]: unit/limits (1 seconds) Testing unit/bitops [ok]: Timedout scripts and unblocked command (633 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (76 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (1 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (1 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (1 ms) [ok]: FUNCTION - function test name with quotes (0 ms) [ok]: FUNCTION - trick global protection 1 (1 ms) [ok]: FUNCTION - test getmetatable on script load (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: BITCOUNT against wrong type (1 ms) [ok]: BITCOUNT returns 0 against non existing key (1 ms) [ok]: BITCOUNT returns 0 with out of range indexes (0 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (2 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (1 ms) [ok]: BITCOUNT against test vector #3 (1 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (1 ms) [49/91 done]: unit/functions (4 seconds) Testing unit/bitfield [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (203 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (11 ms) [ok]: BITFIELD signed SET and GET basics (1 ms) [ok]: BITFIELD unsigned SET and GET basics (1 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (1 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (1 ms) [ok]: BITFIELD chaining of multiple commands (1 ms) [ok]: BITFIELD unsigned overflow wrap (2 ms) [ok]: BITFIELD unsigned overflow sat (1 ms) [ok]: BITFIELD signed overflow wrap (2 ms) [ok]: BITFIELD signed overflow sat (2 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3003 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (631 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: BITCOUNT fuzzing without start/end (408 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (888 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: CONFIG SET with multiple args (3 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: CONFIG SET rollback on set error (2 ms) [ok]: Lua scripts using SELECT are replicated correctly (2 ms) [ok]: CONFIG SET rollback on apply error (5 ms) [ok]: CONFIG SET duplicate configs (1 ms) [ok]: CONFIG SET set immutable (0 ms) [ok]: CONFIG GET hidden configs (6 ms) [ok]: CONFIG GET multiple args (0 ms) [ok]: redict-server command line arguments - error cases (81 ms) [ok]: BITFIELD overflow detection fuzzing (518 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: redict-server command line arguments - allow passing option name and option value in the same arg (229 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (588 ms) [ok]: Replication: commands with many arguments (issue #1221) (16662 ms) [ok]: spopwithcount rewrite srem command (100 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: redict-server command line arguments - wrong usage that we support anyway (233 ms) [ok]: BITCOUNT fuzzing with start/end (685 ms) [ok]: BITCOUNT with start, end (2 ms) [ok]: BITCOUNT with illegal arguments (1 ms) [ok]: BITCOUNT against non-integer value (1 ms) [ok]: BITCOUNT regression test for github issue #582 (1 ms) [ok]: BITCOUNT misaligned prefix (0 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (1 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (1 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (1 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (1 ms) [ok]: BITFIELD overflow wrap fuzzing (536 ms) [ok]: BITFIELD regression for #3221 (0 ms) [ok]: BITFIELD regression for #3564 (3 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (1 ms) [ok]: redict-server command line arguments - allow option value to use the `--` prefix (236 ms) [ok]: BITOP and fuzzing (284 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (600 ms) [ok]: redict-server command line arguments - option name and option value in the same arg and `--` prefix (230 ms) [ok]: BITFIELD: setup slave (102 ms) [ok]: BITFIELD: write on master, read on slave (3 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (1 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: redict.replicate_commands() can be issued anywhere now (1 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (3 ms) [ok]: PRNG is seeded randomly for command replication (2 ms) [ok]: Using side effects is not a problem with command replication (3 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (9928 ms) [50/91 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing unit/geo [51/91 done]: unit/bitfield (2 seconds) Testing unit/memefficiency [ok]: GEO with wrong type src key (2 ms) [ok]: GEO with non existing src key (1 ms) [ok]: GEO BYLONLAT with empty search (1 ms) [ok]: GEO BYMEMBER with non existing member (1 ms) [ok]: GEOADD create (0 ms) [ok]: GEOADD update (0 ms) [ok]: GEOADD update with CH option (1 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: GEOADD update with XX option (1 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (1 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: GEOADD invalid coordinates (1 ms) [ok]: GEOADD multi add (0 ms) [ok]: Check geoset values (1 ms) [ok]: GEORADIUS simple (sorted) (1 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: GEOSEARCH simple (sorted) (1 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (1 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (1 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (1 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (2 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (1 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: BITOP or fuzzing (397 ms) [ok]: GEORADIUS with COUNT but missing integer argument (2 ms) [ok]: GEORADIUS with COUNT DESC (1 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (2 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (1 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: GEOSEARCH vs GEORADIUS (1 ms) [ok]: GEOSEARCH non square, long and narrow (1 ms) [ok]: GEOSEARCH corner point test (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (1 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (1 ms) [ok]: GEOPOS missing element (0 ms) [ok]: GEOPOS with only key as argument (1 ms) [ok]: GEODIST simple & unit (1 ms) [ok]: GEODIST missing elements (1 ms) [ok]: GEORADIUS STORE option: syntax error (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (0 ms) [ok]: GEORANGE STORE option: incompatible options (1 ms) [ok]: GEORANGE STORE option: plain usage (1 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (2 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (1 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (3 ms) [ok]: GEOSEARCH the box spans -180° or 180° (1 ms) [ok]: GEOSEARCH with small distance (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (607 ms) [ok]: BITOP xor fuzzing (344 ms) [ok]: BITOP NOT fuzzing (53 ms) [ok]: BITOP with integer encoded source objects (1 ms) [ok]: BITOP with non string source key (1 ms) [ok]: BITOP with empty string after non empty string (issue #529) (1 ms) [ok]: BITPOS against wrong type (0 ms) [ok]: BITPOS will illegal arguments (1 ms) [ok]: BITPOS against non-integer value (1 ms) [ok]: BITPOS bit=0 with empty key returns 0 (0 ms) [ok]: BITPOS bit=1 with empty key returns -1 (0 ms) [ok]: BITPOS bit=0 with string less than 1 word works (0 ms) [ok]: BITPOS bit=1 with string less than 1 word works (0 ms) [ok]: BITPOS bit=0 starting at unaligned address (1 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (3 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (6 ms) [ok]: BITPOS bit=0 works with intervals (1 ms) [ok]: BITPOS bit=1 works with intervals (2 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (6 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 60399) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Memory efficiency with values in range 32 (593 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (1 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (1 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (1 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (1 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (11 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (368 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (603 ms) [ok]: Script block the time in some expiration related commands (83 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: redict-server command line arguments - save with empty input (1199 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (2933 ms) [ok]: Replication of SPOP command -- alsoPropagate() API (1806 ms) [ok]: Redis compatibility global exists (1 ms) [ok]: Script - disallow write on OOM (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call redict (0 ms) [ok]: EVAL - Lua integer -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua string -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redict protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redict protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redict protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redict API? (1 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redict integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redict integer conversion (0 ms) [ok]: EVAL - Redict bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict multi bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redict status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redict nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (1 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redict.call/pcall is considered an error (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (1 ms) [ok]: EVAL - redict.call variant raises a Lua error on Redict cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: redict-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (243 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (341 ms) [ok]: Memory efficiency with values in range 64 (542 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (250 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (1 ms) [ok]: cannot modify protected configuration - no (1 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (25 ms) [ok]: SCRIPTING FLUSH ASYNC (18 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (1 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (1 ms) [ok]: SORT BY output gets ordered for scripting (1 ms) [ok]: SORT BY with GET gets ordered for scripting (1 ms) [ok]: redict.sha1hex() implementation (1 ms) [ok]: TOUCH alters the last access time of a key (3002 ms) [ok]: First server should have role slave after SLAVEOF (103 ms) [ok]: Data divergence can happen under default conditions (4 ms) [ok]: Data divergence is allowed on writable replicas (2 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (361 ms) [52/91 done]: unit/bitops (3 seconds) Testing unit/hyperloglog [ok]: cannot modify protected configuration - local (8 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (813 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [53/91 done]: integration/replication-4 (29 seconds) Testing unit/lazyfree [54/91 done]: integration/psync2-pingoff (17 seconds) Testing unit/wait [ok]: Memory efficiency with values in range 128 (706 ms) [ok]: UNLINK can reclaim memory in background (340 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, reconnect: 1) (9570 ms) [ok]: Setup slave (103 ms) [ok]: WAIT out of range timeout (milliseconds) (1 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (2 ms) [ok]: Measures elapsed time os.clock() (1001 ms) [ok]: Prohibit dangerous lua methods in sandbox (0 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (1 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (777 ms) [ok]: HyperLogLog self test passes (807 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (0 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (368 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1103 ms) [ok]: TOUCH returns the number of existing keys specified (1 ms) [ok]: command stats for GEOADD (3 ms) [ok]: errors stats for GEOADD (2 ms) [ok]: command stats for EXPIRE (2 ms) [ok]: command stats for BRPOP (3 ms) [ok]: command stats for MULTI (5 ms) [ok]: command stats for scripts (4 ms) [ok]: COMMAND COUNT get total number of Redict commands (0 ms) [ok]: COMMAND GETKEYS GET (1 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (1 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (5 ms) [ok]: COMMAND LIST syntax error (2 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (8 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (2 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (1 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (1 ms) [ok]: MSET command will not be marked with movablekeys (1 ms) [ok]: BITFIELD command will not be marked with movablekeys (0 ms) [ok]: LMOVE command will not be marked with movablekeys (1 ms) [ok]: LPOP command will not be marked with movablekeys (1 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (1 ms) [ok]: MEMORY command will not be marked with movablekeys (1 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (1 ms) [ok]: RENAME command will not be marked with movablekeys (0 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (1 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (1 ms) [ok]: XREAD command is marked with movablekeys (0 ms) [ok]: EVAL command is marked with movablekeys (1 ms) [ok]: SORT command is marked with movablekeys (1 ms) [ok]: SORT_RO command is marked with movablekeys (1 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (1 ms) [55/91 done]: unit/introspection-2 (7 seconds) Testing unit/pause [ok]: Memory efficiency with values in range 1024 (748 ms) [ok]: lazy free a stream with all types of metadata (264 ms) [ok]: lazy free a stream with deleted cgroup (2 ms) [ok]: Test read commands are not blocked by client pause (2 ms) [56/91 done]: unit/lazyfree (2 seconds) Testing unit/querybuf [ok]: EVAL does not leak in the Lua stack (568 ms) [ok]: HyperLogLogs are promote from sparse to dense (643 ms) [ok]: Change hll-sparse-max-bytes (1 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (341 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (717 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (75 ms) [ok]: Test new pause time is smaller than old one, then old time preserved (102 ms) [ok]: Test write commands are paused by RO (2 ms) [ok]: Test special commands are paused by RO (3 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (3 ms) [ok]: Test write multi-execs are blocked by pause RO (2 ms) [ok]: Test scripts are blocked by pause RO (2 ms) [ok]: Test RO scripts are not blocked by pause RO (3 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (3 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (3 ms) [ok]: Test may-replicate commands are rejected in RO scripts (1 ms) [ok]: Test multiple clients can be queued up and unblocked (3 ms) [ok]: Test clients with syntax errors will get responses immediately (1 ms) [ok]: Slave should be able to synchronize with the master (770 ms) [ok]: Detect write load to master (0 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (330 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1068 ms) [ok]: Test both active and passive expires are skipped during client pause (105 ms) [ok]: Test that client pause starts at the end of a transaction (4 ms) [ok]: MGET: mget shouldn't be propagated in Lua (100 ms) [ok]: config during loading (1743 ms) [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (100 ms) [ok]: Test when replica paused, offset would not grow (7 ms) [ok]: Test replica offset would grow after unpause (1 ms) [57/91 done]: unit/pause (1 seconds) Testing unit/tls [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (327 ms) [ok]: Call Redict command with many args from Lua (issue #1764) (3 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redict namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (1 ms) [ok]: Script with RESP3 map (2 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (796 ms) [ok]: CONFIG REWRITE handles rename-command properly (475 ms) [58/91 done]: unit/tls (1 seconds) Testing unit/tracking [ok]: Script return recursive object (225 ms) [ok]: Script check unpack with massive arguments (67 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (1 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on redict table (0 ms) [ok]: Try trick readonly table on json table (1 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: Clients are able to enable tracking and redirect it (1 ms) [ok]: The other connection is able to get invalidations (2 ms) [ok]: The client is now able to disable tracking (1 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (1 ms) [ok]: Clients can enable the BCAST mode with prefixes (3 ms) [ok]: Adding prefixes to BCAST mode works (1 ms) [ok]: Tracking NOLOOP mode in standard mode works (3 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: PSYNC2 #3899 regression: verify consistency (57 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1105 ms) [ok]: HyperLogLog sparse encoding stress test (1365 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (686 ms) [ok]: Memory efficiency with values in range 16384 (2033 ms) [59/91 done]: unit/memefficiency (4 seconds) Testing unit/oom-score-adj [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (403 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (87 ms) [ok]: CONFIG SET oom-score-adj works as expected (16 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (1 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (1 ms) [ok]: CONFIG SET oom score restored on disable (1 ms) [ok]: CONFIG SET oom score relative and absolute (1 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [ok]: Timedout script does not cause a false dead client (90 ms) [60/91 done]: unit/oom-score-adj (1 seconds) Testing unit/shutdown [61/91 done]: integration/psync2-reg (22 seconds) Testing unit/networking [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled (23875 ms) [ok]: CONFIG REWRITE handles alias config properly (1072 ms) [62/91 done]: unit/introspection (11 seconds) Testing unit/client-eviction [ok]: Timedout script link is still usable after Lua returns (144 ms) [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (512 ms) [ok]: Tracking gets notification of expired keys (1003 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (124 ms) [ok]: CONFIG SET port number (221 ms) [ok]: client evicted due to large argv (114 ms) [ok]: client evicted due to large query buf (49 ms) [ok]: client evicted due to percentage of maxmemory (13 ms) [ok]: Tracking gets notification of lazy expired keys (202 ms) [ok]: HELLO 3 reply is correct (0 ms) [ok]: HELLO without protover (2 ms) [ok]: RESP3 based basic invalidation (1 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (3 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (19 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (2 ms) [ok]: Different clients can redirect to the same connection (1 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (2 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (1 ms) [ok]: Invalidation message sent when using OPTOUT option (1 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (1 ms) [ok]: Able to redirect to a RESP3 client (3 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (3 ms) [ok]: BCAST with prefix collisions throw errors (2 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [ok]: Temp rdb will be deleted in signal handle (74 ms) [ok]: CONFIG SET bind address (230 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (113 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (2 ms) [ok]: Tracking invalidation message of eviction keys should be before response (6 ms) [ok]: Unblocked BLMOVE gets notification after response (2 ms) [ok]: client evicted due to large multi buf (174 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1102 ms) [ok]: Tracking gets notification on tracking table key eviction (45 ms) [ok]: Invalidation message received for flushall (3 ms) [ok]: Invalidation message received for flushdb (3 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (15 ms) [ok]: Test ASYNC flushall (5 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (4 ms) [ok]: RDB save will be failed in shutdown (4 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 93871) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (3 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #2 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #0 to replicate from #1 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #3 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #2 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (569 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (129 ms) [ok]: Timedout scripts and unblocked command (624 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (27 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (4 ms) [ok]: Clean up rdb same named folder (1 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (194 ms) [ok]: Tracking info is correct (6 ms) [ok]: CLIENT GETREDIR provides correct client id (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (3 ms) [ok]: Regression test for #11715 (3 ms) [ok]: RESP3 based basic invalidation with client reply off (4 ms) [ok]: query buffer resized correctly (2854 ms) [ok]: client evicted due to watched key list (306 ms) [ok]: RESP2 based basic invalidation with client reply off (45 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (4 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (3 ms) [ok]: query buffer resized correctly when not idle (32 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (204 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (13 ms) [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (96 ms) [ok]: Coverage: Basic CLIENT CACHING (1 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (1 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: CONFIG SET bind-source-addr (534 ms) [ok]: WAITAOF local copy before fsync (144 ms) [63/91 done]: unit/shutdown (1 seconds) Testing unit/violations [64/91 done]: unit/tracking (2 seconds) Testing unit/replybufsize [ok]: WAITAOF local copy everysec (100 ms) [ok]: WAITAOF local copy with appendfsync always (50 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: WAITAOF local wait and then stop aof (27 ms) [ok]: WAITAOF local on server with aof disabled (0 ms) [ok]: SORT adds integer field to list (1 ms) [ok]: Connect a replica to the master instance (103 ms) [ok]: Now use EVALSHA against the master, with both SHAs (1 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: EVALSHA replication when first call is readonly (2 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [65/91 done]: unit/violations (0 seconds) Testing unit/cluster/announced-endpoints [ok]: maxmemory - policy volatile-random should only remove volatile keys. (680 ms) [ok]: WAITAOF local if AOFRW was postponed (269 ms) [ok]: Default bind address configuration handling (342 ms) [ok]: Protected mode works as expected (5 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [66/91 done]: unit/networking (1 seconds) Testing unit/cluster/misc [ok]: ziplist implementation: encoding stress testing (11657 ms) [ok]: verify reply buffer limits (656 ms) [ok]: WAITAOF replica copy before fsync (139 ms) [67/91 done]: unit/replybufsize (1 seconds) Testing unit/cluster/cli [68/91 done]: unit/type/list-3 (52 seconds) Testing unit/cluster/scripting [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (710 ms) [ok]: Connect a replica to the master instance (102 ms) [ok]: redict.replicate_commands() can be issued anywhere now (1 ms) [ok]: redict.set_repl() can be issued before replicate_commands() now (1 ms) [ok]: redict.set_repl() don't accept invalid values (0 ms) [ok]: Test selective replication of certain Redict commands from Lua (3 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: WAITAOF replica copy everysec (802 ms) [ok]: client evicted due to pubsub subscriptions (2142 ms) [ok]: client evicted due to tracking redirection (110 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (2 ms) [ok]: query buffer resized correctly with fat argv (2962 ms) [69/91 done]: unit/querybuf (6 seconds) Testing unit/cluster/hostnames [ok]: WAITAOF replica copy everysec with AOFRW (1097 ms) [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (204 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (2 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (3 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (1 ms) [ok]: Function no-cluster flag (1 ms) [ok]: Script no-cluster flag (0 ms) [ok]: Lua scripts eviction does not generate many scripts (180 ms) [70/91 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/human-announced-nodename [ok]: Lua scripts eviction is plain LRU (88 ms) [ok]: Test change cluster-announce-bus-port at runtime (206 ms) [ok]: Create 3 node cluster (1998 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Key lazy expires during key migration (16 ms) [ok]: Lua scripts eviction does not affect script load (208 ms) [ok]: Coverage: Basic cluster commands (44 ms) [ok]: Perform a Resharding (106 ms) [ok]: Verify command got unblocked after resharding (36 ms) [ok]: Wait for cluster to be stable (15 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (5 ms) [ok]: Sanity test push cmd after resharding (2 ms) [ok]: Run blocking command again on cluster node1 (1 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [71/91 done]: unit/cluster/announced-endpoints (3 seconds) Testing unit/cluster/multi-slot-operations [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: Shebang support for lua engine (1 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (4 ms) [ok]: no-writes shebang flag (1 ms) [ok]: no-writes shebang flag on replica (106 ms) [72/91 done]: unit/cluster/misc (4 seconds) Testing unit/cluster/slot-ownership [ok]: not enough good replicas (3 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 126380) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 5 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #3 (1 ms) [ok]: not enough good replicas state change during long script (830 ms) [ok]: allow-stale shebang flag (2 ms) [ok]: reject script do not cause a Lua stack leak (6 ms) [ok]: Kill a cluster node and wait for fail state (1679 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2318 ms) [ok]: Verify command got unblocked after cluster failure (49 ms) [ok]: Consistent eval error reporting (14 ms) [ok]: LUA redict.error_reply API (1 ms) [ok]: LUA redict.error_reply API with empty string (1 ms) [ok]: LUA redict.status_reply API (1 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (0 ms) [ok]: LUA test pcall with non string/integer arg (1 ms) [ok]: LUA test trim string as expected (1 ms) [73/91 done]: unit/scripting (18 seconds) Testing unit/cluster/links [ok]: PSYNC2: Set #0 to replicate from #1 (5 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (0 ms) [ok]: Set cluster human announced nodename and let it propagate (145 ms) [ok]: Set cluster hostnames and verify they are propagated (151 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (776 ms) [ok]: WAITAOF replica copy appendfsync always (199 ms) [ok]: Update hostnames and make sure they are all eventually propagated (214 ms) [ok]: Continuous slots distribution (14 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (2 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (6 ms) [ok]: Client output buffer hard limit is enforced (14284 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (212 ms) [74/91 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/cluster-response-tls [75/91 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/failure-marking [ok]: WAITAOF replica copy if replica is blocked (382 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (211 ms) [ok]: client evicted due to client tracking prefixes (4535 ms) [ok]: client evicted due to output buf (11 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (1 ms) [ok]: client no-evict on (87 ms) [ok]: client no-evict off (48 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, reconnect: 1) (9625 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (362 ms) [ok]: avoid client eviction when client is freed by output buffer limit (155 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1025 ms) [ok]: WAITAOF on promoted replica (1 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: decrease maxmemory-clients causes client eviction (571 ms) [76/91 done]: unit/cluster/slot-ownership (4 seconds) [ok]: evict clients only until below limit (167 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (104 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, reconnect: 0) (85 ms) [ok]: evict clients in right order (large to small) (203 ms) [ok]: client total memory grows during client no-evict (137 ms) [ok]: Slave should be able to synchronize with the master (206 ms) [ok]: Detect write load to master (0 ms) [ok]: client total memory grows during maxmemory-clients disabled (137 ms) [77/91 done]: unit/client-eviction (10 seconds) [ok]: Human nodenames are visible in log messages (3532 ms) [78/91 done]: unit/cluster/human-announced-nodename (6 seconds) [ok]: WAITAOF master that loses a replica and backlog is dropped (2024 ms) [ok]: Functions are added to new node on redict-cli cluster add-node (3110 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (4000 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (1076 ms) [ok]: Each node has two links with each peer (10 ms) [ok]: Validate cluster links format (2 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4558 ms) [ok]: AOF rewrite during write load: RDB preamble=no (40011 ms) [ok]: Test restart will keep hostname information (271 ms) [ok]: Test hostname validation (2 ms) [ok]: Turning off AOF kills the background writing child if any (132 ms) [79/91 done]: unit/cluster/hostnames (8 seconds) [ok]: AOF rewrite of list with listpack encoding, string data (220 ms) [ok]: WAITAOF master isn't configured to do AOF (1002 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (253 ms) [ok]: AOF rewrite of list with listpack encoding, int data (173 ms) [ok]: WAITAOF replica isn't configured to do AOF (233 ms) [ok]: Verify that single primary marks replica as failed (3092 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (293 ms) [ok]: AOF rewrite of set with intset encoding, string data (180 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (342 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 161736) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: --- CYCLE 6 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (0 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (797 ms) [ok]: PSYNC2: Set #4 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #0 to replicate from #2 (1 ms) [ok]: PSYNC2: Set #2 to replicate from #1 (0 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: AOF rewrite of set with intset encoding, int data (232 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (138 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (144 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (258 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (223 ms) [ok]: WAITAOF master sends PING after last write (1226 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (400 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (107 ms) [ok]: Migrate the last slot away from a node using redict-cli (4119 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (275 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (211 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (296 ms) [ok]: WAITAOF master client didn't send any write command (1203 ms) [ok]: AOF rewrite functions (265 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (220 ms) [ok]: BGREWRITEAOF is refused if already in progress (14 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, reconnect: 1) (6420 ms) [80/91 done]: unit/aofrw (62 seconds) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: WAITAOF master client didn't send any command (1202 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (6033 ms) [ok]: redict-cli -4 --cluster create using 127.0.0.1 with cluster-port (2045 ms) [ok]: No response for single command if client output buffer hard limit is enforced (130 ms) [ok]: Detect write load to master (1002 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 196543) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (2 ms) [ok]: PSYNC2: Bring the master back again for next test (3 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1049 ms) [ok]: PSYNC2: Partial resync after restart using RDB aux fields (307 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (23 ms) [ok]: redict-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (1139 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (37 ms) [ok]: Obuf limit, KEYS stopped mid-run (78 ms) [81/91 done]: unit/obuf-limits (26 seconds) [82/91 done]: integration/psync2 (42 seconds) [ok]: WAITAOF when replica switches between masters, fsync: no (3592 ms) [ok]: Verify that multiple primaries mark replica as failed (6150 ms) [83/91 done]: unit/cluster/failure-marking (15 seconds) [ok]: redict-cli -4 --cluster create using localhost with cluster-port (2038 ms) [ok]: GEOSEARCH fuzzy test - byradius (27980 ms) [ok]: redict-cli -4 --cluster add-node using localhost with cluster-port (1101 ms) [84/91 done]: unit/cluster/cli (21 seconds) [ok]: WAITAOF when replica switches between masters, fsync: everysec (2602 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb (23112 ms) [ok]: Disconnect link when send buffer limit reached (13182 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (1632 ms) [ok]: Link memory increases with publishes (692 ms) [ok]: setup replication for following tests (103 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, reconnect: 1) (8083 ms) [ok]: Link memory resets after publish messages flush (524 ms) [85/91 done]: unit/cluster/links (20 seconds) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (761 ms) [ok]: Slave should be able to synchronize with the master (102 ms) [86/91 done]: unit/wait (29 seconds) [ok]: Detect write load to master (1001 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, reconnect: 1) (9689 ms) [ok]: Slave should be able to synchronize with the master (105 ms) [ok]: Detect write load to master (1001 ms) [ok]: GEOSEARCH fuzzy test - bybox (20298 ms) [ok]: GEOSEARCH box edges fuzzy test (58 ms) [87/91 done]: unit/geo (48 seconds) [ok]: Fuzzing dense/sparse encoding: Redict should always detect errors (47069 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (0 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (1 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (1 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled (23221 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, reconnect: 1) (9706 ms) [ok]: Slave should be able to synchronize with the master (1838 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, reconnect: 0) (136 ms) [ok]: Slave should be able to synchronize with the master (814 ms) [ok]: Detect write load to master (1 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (6224 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (2744 ms) [ok]: slave buffer are counted correctly (53750 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (1573 ms) [ok]: PFADD / PFCOUNT cache invalidation works (1 ms) [88/91 done]: unit/hyperloglog (61 seconds) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, reconnect: 1) (6467 ms) [ok]: Slave should be able to synchronize with the master (821 ms) [ok]: Detect write load to master (0 ms) [ok]: replica buffer don't induce eviction (10810 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (269 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, reconnect: 1) (8112 ms) [ok]: Slave should be able to synchronize with the master (829 ms) [ok]: Detect write load to master (0 ms) [ok]: client tracking don't cause eviction feedback loop (1380 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb (20970 ms) [ok]: propagation with eviction (97 ms) [ok]: propagation with eviction in MULTI (96 ms) [ok]: lru/lfu value of the key just added (1 ms) [89/91 done]: unit/maxmemory (81 seconds) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, reconnect: 1) (9741 ms) [ok]: Slave should be able to synchronize with the master (846 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, reconnect: 1) (9944 ms) [ok]: Slave should be able to synchronize with the master (804 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, reconnect: 0) (69 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (25901 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (different replid): replica enter loading (422 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, reconnect: 1) (6493 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (321 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (854 ms) [ok]: Busy script during async loading (854 ms) [ok]: Blocked commands and configs during async-loading (427 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 17085 to exit... Waiting for process 17085 to exit... Waiting for process 17085 to exit... Waiting for process 17085 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, reconnect: 1) (8103 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, reconnect: 1) (9819 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, reconnect: 1) (10860 ms) [90/91 done]: integration/replication-psync (165 seconds) [ok]: diskless loading short read (36291 ms) [ok]: diskless no replicas drop during rdb pipe (7260 ms) [ok]: diskless slow replicas drop during rdb pipe (4481 ms) [ok]: diskless fast replicas drop during rdb pipe (6017 ms) [ok]: diskless all replicas drop during rdb pipe (1224 ms) [ok]: diskless timeout replicas drop during rdb pipe (7564 ms) [ok]: diskless replication child being killed is collected (1449 ms) [ok]: replication child dies when parent is killed - diskless: yes (1163 ms) [ok]: replication child dies when parent is killed - diskless: no (1367 ms) [ok]: diskless replication read pipe cleanup (912 ms) [ok]: replicaof right after disconnection (1831 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (921 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync (105 ms) [ok]: replica can handle EINTR if use diskless load (842 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (97 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (99 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (106 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (104 ms) [ok]: PSYNC with wrong offset should throw error (2 ms) [ok]: Test replication with lazy expire (112 ms) [91/91 done]: integration/replication (223 seconds) Testing solo test [ignore]: Test LPUSH and LPOP on plain nodes over 4GB: large memory flag not provided [ignore]: Test LINDEX and LINSERT on plain nodes over 4GB: large memory flag not provided [ignore]: Test LTRIM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LREM on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes over 4GB: large memory flag not provided [ignore]: Test LSET on plain nodes with large elements under packed_threshold over 4GB: large memory flag not provided [ignore]: Test LSET splits a quicklist node, and then merge: large memory flag not provided [ignore]: Test LSET splits a LZF compressed quicklist node, and then merge: large memory flag not provided [ignore]: Test LMOVE on plain nodes over 4GB: large memory flag not provided [91/91 done]: list-large-memory (1 seconds) Testing solo test [ignore]: SADD, SCARD, SISMEMBER - large data: large memory flag not provided [91/91 done]: set-large-memory (0 seconds) Testing solo test [ignore]: BIT pos larger than UINT_MAX: large memory flag not provided [ignore]: SETBIT values larger than UINT32_MAX and lzf_compress/lzf_decompress correctly: large memory flag not provided [91/91 done]: bitops-large-memory (0 seconds) Testing solo test [91/91 done]: defrag (3 seconds) Testing solo test [ignore]: XADD one huge field: large memory flag not provided [ignore]: XADD one huge field - 1: large memory flag not provided [ignore]: several XADD big fields: large memory flag not provided [ignore]: single XADD big fields: large memory flag not provided [ignore]: hash with many big fields: large memory flag not provided [ignore]: hash with one huge field: large memory flag not provided [91/91 done]: violations (1 seconds) The End Execution time of different units: 1 seconds - unit/printver 1 seconds - unit/type/incr 1 seconds - unit/info-command 1 seconds - unit/protocol 2 seconds - unit/keyspace 2 seconds - unit/auth 3 seconds - unit/info 1 seconds - unit/quit 5 seconds - unit/type/stream-cgroups 7 seconds - unit/type/hash 5 seconds - unit/multi 0 seconds - unit/acl-v2 2 seconds - unit/acl 11 seconds - unit/type/string 13 seconds - unit/sort 17 seconds - unit/type/list 16 seconds - unit/other 17 seconds - unit/expire 12 seconds - unit/latency-monitor 21 seconds - unit/type/list-2 12 seconds - integration/replication-2 23 seconds - unit/type/stream 24 seconds - unit/type/set 1 seconds - integration/aof-race 25 seconds - unit/scan 13 seconds - integration/replication-3 8 seconds - integration/shutdown 0 seconds - integration/convert-ziplist-hash-on-load 0 seconds - integration/convert-zipmap-hash-on-load 1 seconds - integration/convert-ziplist-zset-on-load 1 seconds - integration/logging 12 seconds - integration/replication-buffer 7 seconds - integration/rdb 31 seconds - unit/type/zset 32 seconds - unit/dump 27 seconds - integration/block-repl 1 seconds - integration/redict-benchmark 5 seconds - integration/failover 16 seconds - integration/aof 1 seconds - unit/pubsub 1 seconds - unit/pubsubshard 2 seconds - unit/slowlog 4 seconds - integration/dismiss-mem 8 seconds - integration/psync2-master-restart 16 seconds - integration/corrupt-dump 18 seconds - integration/aof-multi-part 11 seconds - integration/redict-cli 1 seconds - unit/limits 4 seconds - unit/functions 20 seconds - integration/corrupt-dump-fuzzer 2 seconds - unit/bitfield 3 seconds - unit/bitops 29 seconds - integration/replication-4 17 seconds - integration/psync2-pingoff 7 seconds - unit/introspection-2 2 seconds - unit/lazyfree 1 seconds - unit/pause 1 seconds - unit/tls 4 seconds - unit/memefficiency 1 seconds - unit/oom-score-adj 22 seconds - integration/psync2-reg 11 seconds - unit/introspection 1 seconds - unit/shutdown 2 seconds - unit/tracking 0 seconds - unit/violations 1 seconds - unit/networking 1 seconds - unit/replybufsize 52 seconds - unit/type/list-3 6 seconds - unit/querybuf 2 seconds - unit/cluster/scripting 3 seconds - unit/cluster/announced-endpoints 4 seconds - unit/cluster/misc 18 seconds - unit/scripting 3 seconds - unit/cluster/multi-slot-operations 0 seconds - unit/cluster/cluster-response-tls 4 seconds - unit/cluster/slot-ownership 10 seconds - unit/client-eviction 6 seconds - unit/cluster/human-announced-nodename 8 seconds - unit/cluster/hostnames 62 seconds - unit/aofrw 26 seconds - unit/obuf-limits 42 seconds - integration/psync2 15 seconds - unit/cluster/failure-marking 21 seconds - unit/cluster/cli 20 seconds - unit/cluster/links 29 seconds - unit/wait 48 seconds - unit/geo 61 seconds - unit/hyperloglog 81 seconds - unit/maxmemory 165 seconds - integration/replication-psync 223 seconds - integration/replication 1 seconds - list-large-memory 0 seconds - set-large-memory 0 seconds - bitops-large-memory 3 seconds - defrag 1 seconds - violations \o/ All tests passed without errors! Cleanup: may take some time... OK make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict: Entering fakeroot... make -C src install make[1]: Entering directory '/home/buildozer/aports/community/redict/src/redict/src' INSTALL redict-sentinel INSTALL redict-check-rdb Hint: It's a good idea to run 'make test' ;) INSTALL redict-server INSTALL redict-benchmark INSTALL redict-cli INSTALL ../redict.conf INSTALL ../sentinel.conf make[1]: Leaving directory '/home/buildozer/aports/community/redict/src/redict/src' >>> redict-benchmark*: Running split function benchmark... 'usr/bin/redict-benchmark' -> '/home/buildozer/aports/community/redict/pkg/redict-benchmark/usr/bin/redict-benchmark' >>> redict-benchmark*: Preparing subpackage redict-benchmark... >>> redict-benchmark*: Stripping binaries >>> redict-benchmark*: Running postcheck for redict-benchmark >>> redict-cli*: Running split function cli... 'usr/bin/redict-cli' -> '/home/buildozer/aports/community/redict/pkg/redict-cli/usr/bin/redict-cli' >>> redict-cli*: Preparing subpackage redict-cli... >>> redict-cli*: Stripping binaries >>> redict-cli*: Running postcheck for redict-cli >>> redict-compat*: Running split function compat... >>> redict-compat*: Preparing subpackage redict-compat... >>> redict-compat*: Script found. /bin/sh added as a dependency for redict-compat-7.3.2-r0.apk >>> redict-compat*: Adding .pre-install >>> redict-compat*: Running postcheck for redict-compat >>> redict-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/community/redict/pkg/redict-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/community/redict/pkg/redict-openrc/etc/init.d' >>> redict-openrc*: Preparing subpackage redict-openrc... >>> redict-openrc*: Running postcheck for redict-openrc >>> redict*: Running postcheck for redict >>> redict*: Preparing package redict... >>> redict*: Stripping binaries >>> redict*: Script found. /bin/sh added as a dependency for redict-7.3.2-r0.apk >>> redict*: Adding .post-install >>> redict*: Adding .post-upgrade >>> redict*: Adding .pre-install >>> redict-benchmark*: Scanning shared objects >>> redict-cli*: Scanning shared objects >>> redict-compat*: Scanning shared objects >>> redict-openrc*: Scanning shared objects >>> redict*: Scanning shared objects >>> redict-benchmark*: Tracing dependencies... so:libc.musl-loongarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-benchmark*: Package size: 290.1 KB >>> redict-benchmark*: Compressing data... >>> redict-benchmark*: Create checksum... >>> redict-benchmark*: Create redict-benchmark-7.3.2-r0.apk >>> redict-cli*: Tracing dependencies... so:libc.musl-loongarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict-cli*: Package size: 618.3 KB >>> redict-cli*: Compressing data... >>> redict-cli*: Create checksum... >>> redict-cli*: Create redict-cli-7.3.2-r0.apk >>> redict-compat*: Tracing dependencies... !redis !valkey-compat /bin/sh redict-benchmark=7.3.2-r0 redict-cli=7.3.2-r0 redict=7.3.2-r0 >>> redict-compat*: Package size: 1.0 B >>> redict-compat*: Compressing data... >>> redict-compat*: Create checksum... >>> redict-compat*: Create redict-compat-7.3.2-r0.apk >>> redict-openrc*: Tracing dependencies... >>> redict-openrc*: Package size: 1.7 KB >>> redict-openrc*: Compressing data... >>> redict-openrc*: Create checksum... >>> redict-openrc*: Create redict-openrc-7.3.2-r0.apk >>> redict*: Tracing dependencies... /bin/sh so:libc.musl-loongarch64.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> redict*: Package size: 3.3 MB >>> redict*: Compressing data... >>> redict*: Create checksum... >>> redict*: Create redict-7.3.2-r0.apk >>> redict: Build complete at Fri, 10 Jan 2025 15:21:13 +0000 elapsed time 0h 4m 51s >>> redict: Cleaning up srcdir >>> redict: Cleaning up pkgdir >>> redict: Uninstalling dependencies... (1/8) Purging .makedepends-redict (20250110.151624) (2/8) Purging linux-headers (6.6-r1) (3/8) Purging openssl-dev (3.3.2-r4) (4/8) Purging tcl (8.6.15-r0) (5/8) Purging tzdata (2024b-r1) (6/8) Purging procps-ng (4.0.4-r2) (7/8) Purging libproc2 (4.0.4-r2) (8/8) Purging libintl (0.22.5-r0) Executing busybox-1.37.0-r9.trigger OK: 245 MiB in 99 packages >>> redict: Updating the community/loongarch64 repository index... >>> redict: Signing the index...