>>> valkey: Building main/valkey 9.0.3-r0 (using abuild 3.17.0_rc1-r1) started Sun, 19 Apr 2026 05:25:18 +0000 >>> valkey: Validating /home/buildozer/aports/main/valkey/APKBUILD... >>> WARNING: valkey: valkey.post-upgrade is not in $source/$install/$triggers >>> valkey: Analyzing dependencies... >>> valkey: Installing for build: build-base linux-headers openssl-dev tcl procps ( 1/10) Installing linux-headers (7.0.0-r0) ( 2/10) Installing openssl-dev (3.5.6-r0) ( 3/10) Installing tzdata (2026a-r0) ( 4/10) Installing tcl (8.6.17-r1) ( 5/10) Installing libintl (1.0-r0) ( 6/10) Installing skalibs-libs (2.14.5.1-r0) ( 7/10) Installing utmps-libs (0.1.3.2-r1) ( 8/10) Installing libproc2 (4.0.6-r0) ( 9/10) Installing procps-ng (4.0.6-r0) (10/10) Installing .makedepends-valkey (20260419.052518) Executing busybox-1.37.0-r31.trigger OK: 399.8 MiB in 111 packages >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Cleaning up tmpdir >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.24/valkey-9.0.3.tar.gz /var/cache/distfiles/v3.24/valkey-9.0.3.tar.gz: OK /home/buildozer/aports/main/valkey/valkey-loadmod.patch: OK /home/buildozer/aports/main/valkey/valkey.conf.patch: OK /home/buildozer/aports/main/valkey/sentinel.conf.patch: OK /home/buildozer/aports/main/valkey/valkey.initd: OK /home/buildozer/aports/main/valkey/valkey.confd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.initd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.confd: OK >>> valkey: Fetching https://distfiles.alpinelinux.org/distfiles/v3.24/valkey-9.0.3.tar.gz /var/cache/distfiles/v3.24/valkey-9.0.3.tar.gz: OK /home/buildozer/aports/main/valkey/valkey-loadmod.patch: OK /home/buildozer/aports/main/valkey/valkey.conf.patch: OK /home/buildozer/aports/main/valkey/sentinel.conf.patch: OK /home/buildozer/aports/main/valkey/valkey.initd: OK /home/buildozer/aports/main/valkey/valkey.confd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.initd: OK /home/buildozer/aports/main/valkey/valkey-sentinel.confd: OK >>> valkey: Unpacking /var/cache/distfiles/v3.24/valkey-9.0.3.tar.gz... >>> valkey: valkey-loadmod.patch patching file src/config.c patching file src/module.c Hunk #5 succeeded at 12367 (offset 11 lines). Hunk #6 succeeded at 12548 (offset 11 lines). Hunk #7 succeeded at 12623 (offset 11 lines). Hunk #8 succeeded at 13559 (offset 23 lines). Hunk #9 succeeded at 13574 (offset 23 lines). patching file src/module.h >>> valkey: valkey.conf.patch patching file valkey.conf Hunk #8 succeeded at 2622 (offset 3 lines). >>> valkey: sentinel.conf.patch patching file sentinel.conf Hunk #4 succeeded at 259 (offset 3 lines). Hunk #5 succeeded at 284 (offset 3 lines). cd src && make all make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/src' cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MM acl.c adlist.c ae.c allocator_defrag.c anet.c aof.c bio.c bitops.c blocked.c call_reply.c childinfo.c cli_commands.c cli_common.c cluster.c cluster_legacy.c cluster_migrateslots.c cluster_slot_stats.c commandlog.c commands.c config.c connection.c crc16.c crc64.c crccombine.c crcspeed.c db.c debug.c defrag.c dict.c endianconv.c entry.c eval.c evict.c expire.c functions.c geo.c geohash.c geohash_helper.c hashtable.c hyperloglog.c intset.c io_threads.c kvstore.c latency.c lazyfree.c listpack.c localtime.c logreqres.c lolwut.c lolwut5.c lolwut6.c lolwut9.c lua/debug_lua.c lua/engine_lua.c lua/function_lua.c lua/script_lua.c lzf_c.c lzf_d.c memory_prefetch.c memtest.c module.c monotonic.c mt19937-64.c multi.c networking.c notify.c object.c pqsort.c pubsub.c quicklist.c rand.c rax.c rdb.c rdma.c release.c replication.c resp_parser.c rio.c script.c scripting_engine.c sds.c sentinel.c server.c serverassert.c setcpuaffinity.c setproctitle.c sha1.c sha256.c siphash.c socket.c sort.c sparkline.c strl.c syncio.c syscheck.c t_hash.c t_list.c t_set.c t_stream.c t_string.c t_zset.c threads_mngr.c timeout.c tls.c trace/trace.c trace/trace_aof.c trace/trace_cluster.c trace/trace_commands.c trace/trace_db.c trace/trace_rdb.c trace/trace_server.c tracking.c unix.c util.c valkey-benchmark.c valkey-check-aof.c valkey-check-rdb.c valkey-cli.c vector.c vset.c ziplist.c zipmap.c zmalloc.c > Makefile.dep 2> /dev/null || true rm -rf valkey-server valkey-sentinel valkey-cli valkey-benchmark valkey-check-rdb valkey-check-aof valkey-unit-tests libvalkey.a unit/*.o unit/*.d lua/*.o lua/*.d trace/*.o trace/*.d *.o *.gcda *.gcno *.gcov valkey.info lcov-html Makefile.dep *.so rm -f threads_mngr.d adlist.d vector.d quicklist.d ae.d anet.d dict.d hashtable.d kvstore.d server.d sds.d zmalloc.d lzf_c.d lzf_d.d pqsort.d zipmap.d sha1.d ziplist.d release.d memory_prefetch.d io_threads.d networking.d util.d object.d db.d replication.d rdb.d t_string.d t_list.d t_set.d t_zset.d t_hash.d config.d aof.d pubsub.d multi.d debug.d sort.d intset.d syncio.d cluster.d cluster_legacy.d cluster_slot_stats.d crc16.d cluster_migrateslots.d endianconv.d commandlog.d eval.d bio.d rio.d rand.d memtest.d syscheck.d crcspeed.d crccombine.d crc64.d bitops.d sentinel.d notify.d setproctitle.d blocked.d hyperloglog.d latency.d sparkline.d valkey-check-rdb.d valkey-check-aof.d geo.d lazyfree.d module.d evict.d expire.d geohash.d geohash_helper.d childinfo.d allocator_defrag.d defrag.d siphash.d rax.d t_stream.d listpack.d localtime.d lolwut.d lolwut5.d lolwut6.d lolwut9.d acl.d tracking.d socket.d tls.d sha256.d timeout.d setcpuaffinity.d monotonic.d mt19937-64.d resp_parser.d call_reply.d script.d functions.d commands.d strl.d connection.d unix.d logreqres.d rdma.d scripting_engine.d entry.d vset.d lua/script_lua.d lua/function_lua.d lua/engine_lua.d lua/debug_lua.d trace/trace.d trace/trace_commands.d trace/trace_db.d trace/trace_cluster.d trace/trace_server.d trace/trace_rdb.d trace/trace_aof.d anet.d adlist.d dict.d valkey-cli.d zmalloc.d release.d ae.d serverassert.d crcspeed.d crccombine.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d cli_commands.d sds.d util.d sha256.d ae.d anet.d valkey-benchmark.d adlist.d dict.d zmalloc.d serverassert.d release.d crcspeed.d crccombine.d crc64.d siphash.d crc16.d monotonic.d cli_common.d mt19937-64.d strl.d sds.d util.d sha256.d (cd ../deps && make distclean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps' (cd libvalkey && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (cd fast_float_c_interface && make clean) > /dev/null || true (rm -f .make-*) make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps' (cd modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/src/modules' rm -rf *.xo *.so make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/src/modules' (cd ../tests/modules && make clean) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/tests/modules' rm -f commandfilter.so basics.so testrdb.so fork.so infotest.so propagate.so misc.so hooks.so blockonkeys.so blockonbackground.so scan.so datatype.so datatype2.so auth.so keyspace_events.so block_keyspace_notification.so blockedclient.so getkeys.so getchannels.so test_lazyfree.so timer.so defragtest.so keyspecs.so hash.so zset.so stream.so mallocsize.so aclcheck.so list.so subcommands.so reply.so cmdintrospection.so eventloop.so moduleconfigs.so moduleconfigstwo.so moduleparameter.so publish.so usercall.so postnotifications.so moduleauthtwo.so rdbloadsave.so crash.so cluster.so helloscripting.so unsupported_features.so commandfilter.xo basics.xo testrdb.xo fork.xo infotest.xo propagate.xo misc.xo hooks.xo blockonkeys.xo blockonbackground.xo scan.xo datatype.xo datatype2.xo auth.xo keyspace_events.xo block_keyspace_notification.xo blockedclient.xo getkeys.xo getchannels.xo test_lazyfree.xo timer.xo defragtest.xo keyspecs.xo hash.xo zset.xo stream.xo mallocsize.xo aclcheck.xo list.xo subcommands.xo reply.xo cmdintrospection.xo eventloop.xo moduleconfigs.xo moduleconfigstwo.xo moduleparameter.xo publish.xo usercall.xo postnotifications.xo moduleauthtwo.xo rdbloadsave.xo crash.xo cluster.xo helloscripting.xo unsupported_features.xo make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/tests/modules' (rm -f .make-*) echo STD=-pedantic -std=gnu11 >> .make-settings echo WARN=-Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef >> .make-settings echo OPT= >> .make-settings echo PROG_SUFFIX= >> .make-settings echo MALLOC=libc >> .make-settings echo BUILD_TLS=module >> .make-settings echo BUILD_RDMA= >> .make-settings echo USE_SYSTEMD= >> .make-settings echo USE_FAST_FLOAT=no >> .make-settings echo CFLAGS=-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto >> .make-settings echo LDFLAGS=-Wl,--as-needed,-O1,--sort-common >> .make-settings echo SERVER_CFLAGS= >> .make-settings echo SERVER_LDFLAGS= >> .make-settings echo PREV_FINAL_CFLAGS=-pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 >> .make-settings echo PREV_FINAL_LDFLAGS=-Wl,--as-needed,-O1,--sort-common -rdynamic >> .make-settings (cd ../deps && make libvalkey linenoise lua hdr_histogram fpconv) make[2]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps' (cd libvalkey && make clean) > /dev/null || true (cd linenoise && make clean) > /dev/null || true (cd lua && make clean) > /dev/null || true (cd jemalloc && [ -f Makefile ] && make distclean) > /dev/null || true (cd hdr_histogram && make clean) > /dev/null || true (cd fpconv && make clean) > /dev/null || true (cd fast_float_c_interface && make clean) > /dev/null || true (rm -f .make-*) (echo "-Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto" > .make-cflags) (echo "-Wl,--as-needed,-O1,--sort-common" > .make-ldflags) MAKE libvalkey cd libvalkey && make static SDS_INCLUDE_DIR=../../src/ DICT_INCLUDE_DIR=../../src/ USE_TLS=1 MAKE linenoise cd linenoise && make MAKE lua cd lua/src && make all CFLAGS="-Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 " MYLDFLAGS="-Wl,--as-needed,-O1,--sort-common" AR="ar rc" MAKE hdr_histogram cd hdr_histogram && make MAKE fpconv cd fpconv && make make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/libvalkey' make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/linenoise' cc -Wall -Os -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c linenoise.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/hdr_histogram' cc -std=c99 -Wall -Os -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DHDR_MALLOC_INCLUDE=\"hdr_redis_malloc.h\" -c hdr_histogram.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/fpconv' cc -Wall -Os -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -c fpconv_dtoa.c make[3]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/lua/src' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lapi.o lapi.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lcode.o lcode.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldebug.o ldebug.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldo.o ldo.c mkdir -p obj mkdir -p lib cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/tls.c -o obj/tls.o ar rcs libfpconv.a fpconv_dtoa.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/fpconv' cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/adlist.c -o obj/adlist.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/alloc.c -o obj/alloc.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/async.c -o obj/async.o ar rcs libhdrhistogram.a hdr_histogram.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/hdr_histogram' cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/cluster.c -o obj/cluster.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldump.o ldump.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/command.c -o obj/command.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/conn.c -o obj/conn.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/crc16.c -o obj/crc16.o make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/linenoise' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lfunc.o lfunc.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/net.c -o obj/net.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/read.c -o obj/read.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/sockcompat.c -o obj/sockcompat.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lgc.o lgc.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o llex.o llex.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmem.o lmem.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lobject.o lobject.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lopcodes.o lopcodes.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lparser.o lparser.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstate.o lstate.c cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/valkey.c -o obj/valkey.o cc -std=c99 -pedantic -fPIC -fvisibility=hidden -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -DVALKEY_TEST_TLS -Wall -Wextra -pedantic -Wstrict-prototypes -Wwrite-strings -Wno-missing-field-initializers -Werror -g -ggdb -Iinclude/valkey -I../../src/ -I../../src/ -MMD -MP -c src/vkutil.c -o obj/vkutil.o ar rcs lib/libvalkey_tls.a obj/tls.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstring.o lstring.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltable.o ltable.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltm.o ltm.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lundump.o lundump.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lvm.o lvm.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lzio.o lzio.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o strbuf.o strbuf.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o fpconv.o fpconv.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lauxlib.o lauxlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lbaselib.o lbaselib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ldblib.o ldblib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o liolib.o liolib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lmathlib.o lmathlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loslib.o loslib.c ar rcs lib/libvalkey.a obj/adlist.o obj/alloc.o obj/async.o obj/cluster.o obj/command.o obj/conn.o obj/crc16.o obj/net.o obj/read.o obj/sockcompat.o obj/valkey.o obj/vkutil.o cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o ltablib.o ltablib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lstrlib.o lstrlib.c make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/libvalkey' cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o loadlib.o loadlib.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o linit.o linit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cjson.o lua_cjson.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_struct.o lua_struct.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_cmsgpack.o lua_cmsgpack.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua_bit.o lua_bit.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o lua.o lua.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o luac.o luac.c cc -Wall -DLUA_ANSI -DENABLE_CJSON_GLOBAL -DLUA_USE_MKSTEMP -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -O2 -c -o print.o print.c ar rc liblua.a lapi.o lcode.o ldebug.o ldo.o ldump.o lfunc.o lgc.o llex.o lmem.o lobject.o lopcodes.o lparser.o lstate.o lstring.o ltable.o ltm.o lundump.o lvm.o lzio.o strbuf.o fpconv.o lauxlib.o lbaselib.o ldblib.o liolib.o lmathlib.o loslib.o ltablib.o lstrlib.o loadlib.o linit.o lua_cjson.o lua_struct.o lua_cmsgpack.o lua_bit.o # DLL needs all object files ranlib liblua.a cc -o lua -Wl,--as-needed,-O1,--sort-common lua.o liblua.a -lm cc -o luac -Wl,--as-needed,-O1,--sort-common luac.o print.o liblua.a -lm make[3]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps/lua/src' make[2]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/deps' cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o threads_mngr.o -c threads_mngr.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o adlist.o -c adlist.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o vector.o -c vector.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o quicklist.o -c quicklist.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o ae.o -c ae.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o anet.o -c anet.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o dict.o -c dict.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o hashtable.o -c hashtable.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o kvstore.o -c kvstore.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o server.o -c server.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sds.o -c sds.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o zmalloc.o -c zmalloc.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lzf_c.o -c lzf_c.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lzf_d.o -c lzf_d.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o pqsort.o -c pqsort.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o zipmap.o -c zipmap.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sha1.o -c sha1.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o ziplist.o -c ziplist.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o release.o -c release.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o memory_prefetch.o -c memory_prefetch.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o io_threads.o -c io_threads.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o networking.o -c networking.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o util.o -c util.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o object.o -c object.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o db.o -c db.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o replication.o -c replication.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rdb.o -c rdb.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_string.o -c t_string.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_list.o -c t_list.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_set.o -c t_set.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_zset.o -c t_zset.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_hash.o -c t_hash.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o config.o -c config.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o aof.o -c aof.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o pubsub.o -c pubsub.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o multi.o -c multi.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o debug.o -c debug.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sort.o -c sort.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o intset.o -c intset.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o syncio.o -c syncio.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster.o -c cluster.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster_legacy.o -c cluster_legacy.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster_slot_stats.o -c cluster_slot_stats.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crc16.o -c crc16.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cluster_migrateslots.o -c cluster_migrateslots.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o endianconv.o -c endianconv.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o commandlog.o -c commandlog.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o eval.o -c eval.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o bio.o -c bio.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rio.o -c rio.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rand.o -c rand.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o memtest.o -c memtest.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o syscheck.o -c syscheck.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crcspeed.o -c crcspeed.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crccombine.o -c crccombine.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o crc64.o -c crc64.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o bitops.o -c bitops.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sentinel.o -c sentinel.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o notify.o -c notify.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o setproctitle.o -c setproctitle.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o blocked.o -c blocked.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o hyperloglog.o -c hyperloglog.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o latency.o -c latency.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sparkline.o -c sparkline.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-check-rdb.o -c valkey-check-rdb.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-check-aof.o -c valkey-check-aof.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o geo.o -c geo.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lazyfree.o -c lazyfree.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o module.o -c module.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o evict.o -c evict.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o expire.o -c expire.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o geohash.o -c geohash.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o geohash_helper.o -c geohash_helper.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o childinfo.o -c childinfo.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o allocator_defrag.o -c allocator_defrag.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o defrag.o -c defrag.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o siphash.o -c siphash.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rax.o -c rax.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o t_stream.o -c t_stream.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o listpack.o -c listpack.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o localtime.o -c localtime.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut.o -c lolwut.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut5.o -c lolwut5.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut6.o -c lolwut6.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lolwut9.o -c lolwut9.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o acl.o -c acl.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o tracking.o -c tracking.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o socket.o -c socket.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o tls.o -c tls.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o sha256.o -c sha256.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o timeout.o -c timeout.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o setcpuaffinity.o -c setcpuaffinity.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o monotonic.o -c monotonic.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o mt19937-64.o -c mt19937-64.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o resp_parser.o -c resp_parser.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o call_reply.o -c call_reply.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o script.o -c script.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o functions.o -c functions.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o commands.o -c commands.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o strl.o -c strl.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o connection.o -c connection.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o unix.o -c unix.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o logreqres.o -c logreqres.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o rdma.o -c rdma.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o scripting_engine.o -c scripting_engine.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o entry.o -c entry.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o vset.o -c vset.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/script_lua.o -c lua/script_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/function_lua.o -c lua/function_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/engine_lua.o -c lua/engine_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o lua/debug_lua.o -c lua/debug_lua.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace.o -c trace/trace.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_commands.o -c trace/trace_commands.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_db.o -c trace/trace_db.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_cluster.o -c trace/trace_cluster.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_server.o -c trace/trace_server.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_rdb.o -c trace/trace_rdb.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -Itrace -MMD -o trace/trace_aof.o -c trace/trace_aof.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-cli.o -c valkey-cli.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o serverassert.o -c serverassert.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cli_common.o -c cli_common.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o cli_commands.o -c cli_commands.c cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o valkey-benchmark.o -c valkey-benchmark.c cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-server threads_mngr.o adlist.o vector.o quicklist.o ae.o anet.o dict.o hashtable.o kvstore.o server.o sds.o zmalloc.o lzf_c.o lzf_d.o pqsort.o zipmap.o sha1.o ziplist.o release.o memory_prefetch.o io_threads.o networking.o util.o object.o db.o replication.o rdb.o t_string.o t_list.o t_set.o t_zset.o t_hash.o config.o aof.o pubsub.o multi.o debug.o sort.o intset.o syncio.o cluster.o cluster_legacy.o cluster_slot_stats.o crc16.o cluster_migrateslots.o endianconv.o commandlog.o eval.o bio.o rio.o rand.o memtest.o syscheck.o crcspeed.o crccombine.o crc64.o bitops.o sentinel.o notify.o setproctitle.o blocked.o hyperloglog.o latency.o sparkline.o valkey-check-rdb.o valkey-check-aof.o geo.o lazyfree.o module.o evict.o expire.o geohash.o geohash_helper.o childinfo.o allocator_defrag.o defrag.o siphash.o rax.o t_stream.o listpack.o localtime.o lolwut.o lolwut5.o lolwut6.o lolwut9.o acl.o tracking.o socket.o tls.o sha256.o timeout.o setcpuaffinity.o monotonic.o mt19937-64.o resp_parser.o call_reply.o script.o functions.o commands.o strl.o connection.o unix.o logreqres.o rdma.o scripting_engine.o entry.o vset.o lua/script_lua.o lua/function_lua.o lua/engine_lua.o lua/debug_lua.o trace/trace.o trace/trace_commands.o trace/trace_db.o trace/trace_cluster.o trace/trace_server.o trace/trace_rdb.o trace/trace_aof.o ../deps/libvalkey/lib/libvalkey.a ../deps/lua/src/liblua.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-benchmark ae.o anet.o valkey-benchmark.o adlist.o dict.o zmalloc.o serverassert.o release.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-cli anet.o adlist.o dict.o valkey-cli.o zmalloc.o release.o ae.o serverassert.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o cli_commands.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/linenoise/linenoise.o ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto install valkey-server valkey-sentinel install valkey-server valkey-check-rdb install valkey-server valkey-check-aof cc -o valkey-tls.so tls.c -shared -fPIC -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -DBUILD_TLS_MODULE=2 ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto Hint: It's a good idea to run 'make test' ;) make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/src' Cleanup: may take some time... OK Starting test server at port 21079 [ready]: 53766 Testing unit/dump [ready]: 53767 Testing unit/other [ready]: 53768 Testing unit/querybuf [ready]: 53769 Testing unit/introspection-2 [ready]: 53770 Testing unit/latency-monitor [ready]: 53772 Testing unit/keyspace [ready]: 53771 Testing unit/sort [ready]: 53773 Testing unit/functions [ready]: 53774 Testing unit/hashexpire [ready]: 53775 Testing unit/geo [ready]: 53776 Testing unit/replybufsize [ready]: 53777 Testing unit/memefficiency [ready]: 53778 Testing unit/hyperloglog [ready]: 53779 Testing unit/introspection [ready]: 53780 Testing unit/acl [ready]: 53781 Testing unit/client-eviction [ok]: Listpack: SORT BY key (0 ms) [ok]: Listpack: SORT BY key with limit (0 ms) [ok]: Listpack: SORT BY hash field (0 ms) [ok]: FUNCTION - Basic usage (0 ms) [ok]: FUNCTION - Load with unknown argument (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (0 ms) [ok]: FUNCTION - Create an already exiting library raise error (case insensitive) (1 ms) [ok]: FUNCTION - Create a library with wrong name format (0 ms) [ok]: FUNCTION - Create library with unexisting engine (0 ms) [ok]: DUMP / RESTORE are able to serialize / unserialize a simple key (2 ms) [ok]: Coverage: HELP commands (2 ms) [ok]: RESTORE can set an arbitrary expire to the materialized key (0 ms) [ok]: FUNCTION - Test uncompiled script (2 ms) [ok]: LATENCY HISTOGRAM with empty histogram (1 ms) [ok]: RESTORE can set an expire that overflows a 32 bit integer (1 ms) [ok]: Coverage: MEMORY MALLOC-STATS (1 ms) [ok]: Coverage: MEMORY PURGE (0 ms) [ok]: DEL against a single item (0 ms) [ok]: Coverage: ECHO (0 ms) [ok]: LATENCY HISTOGRAM all commands (0 ms) [ok]: FUNCTION - test replace argument (0 ms) [ok]: Vararg DEL (0 ms) [ok]: FUNCTION - test function case insensitive (0 ms) [ok]: LATENCY HISTOGRAM sub commands (1 ms) [ok]: RESTORE can set an absolute expire (1 ms) [ok]: FUNCTION - test replace argument with failure keeps old libraries (0 ms) [ok]: Untagged multi-key commands (0 ms) [ok]: FUNCTION - test function delete (0 ms) [ok]: LATENCY HISTOGRAM with a subset of commands (1 ms) [ok]: FUNCTION - test fcall bad arguments (1 ms) [ok]: FUNCTION - test fcall bad number of keys arguments (0 ms) [ok]: LATENCY HISTOGRAM command (0 ms) [ok]: RESTORE with ABSTTL in the past (2 ms) [ok]: FUNCTION - test fcall negative number of keys (1 ms) [ok]: FUNCTION - test delete on not exiting library (1 ms) [ignore]: CVE-2025-32023: Sparse HLL XZERO overflow triggers crash: large memory flag not provided [ok]: FUNCTION - test function kill when function is not running (0 ms) [ok]: RESTORE can set LRU (2 ms) [ok]: KEYS with pattern (3 ms) [ok]: GEO with wrong type src key (1 ms) [ok]: HGETEX EX expiry (4 ms) [ok]: FUNCTION - test wrong subcommand (0 ms) [ok]: LATENCY HISTOGRAM with wrong command name skips the invalid one (7 ms) [ok]: RESTORE can set LFU (0 ms) [ok]: KEYS to get all keys (0 ms) [ok]: SAVE - make sure there are all the types as values (9 ms) [ok]: RESTORE returns an error of the key already exists (0 ms) [ok]: GEO with non existing src key (1 ms) [ok]: HGETEX EX with mix of existing and non-existing fields (0 ms) [ok]: DBSIZE (0 ms) [ok]: RESTORE can overwrite an existing key with REPLACE (0 ms) [ok]: GEO BYLONLAT with empty search (0 ms) [ok]: HGETEX EX on more then 1 field (1 ms) [ok]: KEYS with hashtag (0 ms) [ok]: PING (2 ms) [ok]: RESTORE can detect a syntax error for unrecognized options (0 ms) [ok]: GEO BYMEMBER with non existing member (0 ms) [ok]: Connections start with the default user (0 ms) [ok]: CLIENT LIST (0 ms) [ok]: The microsecond part of the TIME command will not overflow (1 ms) [ok]: GEOADD create (1 ms) [ok]: It is possible to create new users (1 ms) [ok]: GEOADD update (0 ms) [ok]: Coverage: ACL USERS (0 ms) [ok]: Usernames can not contain spaces or null characters (0 ms) [ok]: GEOADD update with CH option (0 ms) [ok]: GEOADD update with NX option (0 ms) [ok]: New users start disabled (0 ms) [ok]: GEOADD update with XX option (0 ms) [ok]: Enabling the user allows the login (0 ms) [ok]: Only the set of correct passwords work (1 ms) [ok]: GEOADD update with CH NX option (0 ms) [ok]: It is possible to remove passwords from the set of valid ones (0 ms) [ok]: GEOADD update with CH XX option (0 ms) [ok]: Test password hashes can be added (0 ms) [ok]: GEOADD update with XX NX option will return syntax error (0 ms) [ok]: Test password hashes validate input (0 ms) [ok]: DEL all keys (7 ms) [ok]: CLIENT LIST with IDs (1 ms) [ok]: GEOADD update with invalid option (0 ms) [ok]: ACL GETUSER returns the password hash instead of the actual password (0 ms) [ok]: HGETEX EX -> PERSIST (2 ms) [ok]: CLIENT INFO (0 ms) [ok]: GEOADD invalid coordinates (0 ms) [ok]: Test hashed passwords removal (0 ms) [ok]: HGETEX EX on non-exist field (0 ms) [ok]: CLIENT LIST with ADDR filter (1 ms) [ok]: By default users are not able to access any command (1 ms) [ok]: GEOADD multi add (0 ms) [ok]: HGETEX EX on non-exist key (0 ms) [ok]: By default users are not able to access any key (0 ms) [ok]: CLIENT LIST with LADDR filter (1 ms) [ok]: Check geoset values (0 ms) [ok]: HGETEX EX with duplicate field names (1 ms) [ok]: It's possible to allow the access of a subset of keys (0 ms) [ok]: GEORADIUS simple (sorted) (0 ms) [ok]: By default, only default user is able to publish to any channel (0 ms) [ok]: GEORADIUS_RO simple (sorted) (0 ms) [ok]: By default, only default user is not able to publish to any shard channel (1 ms) [ok]: GEOSEARCH simple (sorted) (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER cannot exist at the same time (0 ms) [ok]: GEOSEARCH FROMLONLAT and FROMMEMBER one must exist (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX cannot exist at the same time (0 ms) [ok]: GEOSEARCH BYRADIUS and BYBOX one must exist (0 ms) [ok]: GEOSEARCH with STOREDIST option (0 ms) [ok]: By default, only default user is able to subscribe to any channel (0 ms) [ok]: GEORADIUS withdist (sorted) (0 ms) [ok]: GEOSEARCH withdist (sorted) (0 ms) [ok]: GEORADIUS with COUNT (0 ms) [ok]: GEORADIUS with multiple WITH* tokens (1 ms) [ok]: GEORADIUS with ANY not sorted by default (0 ms) [ok]: GEORADIUS with ANY sorted by ASC (0 ms) [ok]: GEORADIUS with ANY but no COUNT (0 ms) [ok]: GEORADIUS with COUNT but missing integer argument (0 ms) [ok]: GEORADIUS with COUNT DESC (0 ms) [ok]: GEORADIUS HUGE, issue #2767 (0 ms) [ok]: GEORADIUSBYMEMBER simple (sorted) (1 ms) [ok]: GEORADIUSBYMEMBER_RO simple (sorted) (0 ms) [ok]: GEORADIUSBYMEMBER member does not exist (0 ms) [ok]: GEORADIUSBYMEMBER search areas contain satisfied points in oblique direction (0 ms) [ok]: GEORADIUSBYMEMBER crossing pole search (0 ms) [ok]: GEOSEARCH FROMMEMBER member does not exist (0 ms) [ok]: GEOSEARCH FROMMEMBER simple (sorted) (0 ms) [ok]: By default, only default user is able to subscribe to any shard channel (1 ms) [ok]: GEOSEARCH vs GEORADIUS (0 ms) [ok]: GEOSEARCH non square, long and narrow (0 ms) [ok]: GEOSEARCH corner point test (1 ms) [ok]: GEORADIUSBYMEMBER withdist (sorted) (0 ms) [ok]: GEOHASH is able to return geohash strings (0 ms) [ok]: GEOHASH with only key as argument (0 ms) [ok]: GEOPOS simple (0 ms) [ok]: CLIENT LIST with MAXAGE filter (1 ms) [ok]: GEOPOS missing element (1 ms) [ok]: GEOPOS with only key as argument (0 ms) [ok]: GEODIST simple & unit (0 ms) [ok]: GEODIST missing elements (0 ms) [ok]: By default, only default user is able to subscribe to any pattern (0 ms) [ok]: CLIENT LIST with TYPE filter (0 ms) [ok]: KEYS with empty DB (1 ms) [ok]: GEORADIUS STORE option: syntax error (0 ms) [ok]: It's possible to allow publishing to a subset of channels (1 ms) [ok]: HGETEX EX overwrites existing field TTL with bigger value (1 ms) [ok]: GEOSEARCHSTORE STORE option: syntax error (1 ms) [ok]: GEORANGE STORE option: incompatible options (0 ms) [ok]: It's possible to allow publishing to a subset of shard channels (0 ms) [ok]: HGETEX EX overwrites existing field TTL with smaller value (0 ms) [ok]: CLIENT LIST with USER filter (1 ms) [ok]: Validate subset of channels is prefixed with resetchannels flag (1 ms) [ok]: GEORANGE STORE option: plain usage (0 ms) [ok]: GEORADIUSBYMEMBER STORE/STOREDIST option: plain usage (1 ms) [ok]: GEOSEARCHSTORE STORE option: plain usage (0 ms) [ok]: CLIENT LIST with SKIPME filter (1 ms) [ok]: Quicklist: SORT BY key (8 ms) [ok]: In transaction queue publish/subscribe/psubscribe to unauthorized channel will fail (0 ms) [ok]: HGETEX PX expiry (2 ms) [ok]: GEORANGE STOREDIST option: plain usage (0 ms) [ok]: Quicklist: SORT BY key with limit (1 ms) [ok]: It's possible to allow subscribing to a subset of channels (1 ms) [ok]: GEOSEARCHSTORE STOREDIST option: plain usage (0 ms) [ok]: It's possible to allow subscribing to a subset of shard channels (0 ms) [ok]: It's possible to allow subscribing to a subset of channel patterns (0 ms) [ok]: CLIENT LIST with multiple IDs and TYPE filter (2 ms) [ok]: Subscribers are killed when revoked of channel permission (1 ms) [ok]: GEORANGE STOREDIST option: COUNT ASC and DESC (2 ms) [ok]: HGETEX PX with mix of existing and non-existing fields (1 ms) [ok]: GEOSEARCH the box spans -180° or 180° (0 ms) [ok]: Subscribers are killed when revoked of channel permission (0 ms) [ok]: GEOSEARCH with small distance (1 ms) [ok]: Subscribers are killed when revoked of pattern permission (1 ms) [ok]: HGETEX PX on more then 1 field (1 ms) [ok]: CLIENT LIST with filters matching no clients (1 ms) [ok]: FUNCTION - test loading from rdb (16 ms) [ok]: Subscribers are killed when revoked of allchannels permission (1 ms) [ok]: CLIENT LIST with NAME filter (1 ms) [ok]: Subscribers are pardoned if literal permissions are retained and/or gaining allchannels (0 ms) [ok]: GEOSEARCH BYPOLYGON standard operations (1 ms) [ok]: HGETEX PX -> PERSIST (1 ms) [ok]: HGETEX PX on non-exist field (1 ms) [ok]: HGETEX PX on non-exist key (0 ms) [ok]: blocked command gets rejected when reprocessed after permission change (2 ms) [ok]: GEOSEARCH BYPOLYGON across hemispheres (1 ms) [ok]: CLIENT LIST with FLAGS filter (1 ms) [ok]: HGETEX PX with duplicate field names (0 ms) [ok]: Users can be configured to authenticate with any password (0 ms) [ok]: GEOSEARCH BYPOLYGON overlapping edges (0 ms) [ok]: CLIENT LIST with TYPE filter (0 ms) [ok]: HGETEX PX overwrites existing field TTL with bigger value (1 ms) [ok]: ACLs can exclude single commands (0 ms) [ok]: GEOSEARCH with exact zero distances (0 ms) [ok]: CLIENT LIST with multiple filters (1 ms) [ok]: ACLs can include or exclude whole classes of commands (1 ms) [ok]: HGETEX PX overwrites existing field TTL with smaller value (0 ms) [ok]: ACLs can include single subcommands (0 ms) [ok]: HGETEX EXAT expiry (1 ms) [ok]: ACLs can exclude single subcommands, case 1 (0 ms) [ok]: HGETEX EXAT with mix of existing and non-existing fields (1 ms) [ok]: ACLs can exclude single subcommands, case 2 (1 ms) [ok]: ACLs cannot include a subcommand with a specific arg (0 ms) [ok]: ACLs cannot exclude or include a container commands with a specific arg (0 ms) [ok]: HGETEX EXAT on more then 1 field (1 ms) [ok]: ACLs cannot exclude or include a container command with two args (1 ms) [ok]: ACLs including of a type includes also subcommands (0 ms) [ok]: HGETEX EXAT -> PERSIST (0 ms) [ok]: HGETEX EXAT on non-exist field (1 ms) [ok]: ACLs can block SELECT of all but a specific DB (1 ms) [ok]: HGETEX EXAT on non-exist key (0 ms) [ok]: HGETEX EXAT with duplicate field names (0 ms) [ok]: FUNCTION - test debug reload different options (7 ms) [ok]: ACLs can block all DEBUG subcommands except one (0 ms) [ok]: HGETEX EXAT overwrites existing field TTL with bigger value (1 ms) [ok]: HGETEX EXAT overwrites existing field TTL with smaller value (0 ms) [ok]: ACLs set can include subcommands, if already full command exists (1 ms) [ok]: HGETEX PXAT expiry (1 ms) [ok]: HGETEX PXAT with mix of existing and non-existing fields (1 ms) [ok]: ACLs set can exclude subcommands, if already full command exists (2 ms) [ok]: ACL SETUSER RESET reverting to default newly created user (1 ms) [ok]: FUNCTION - test debug reload with nosave and noflush (4 ms) [ok]: ACL GETUSER is able to translate back command permissions (1 ms) [ok]: FUNCTION - test flushall and flushdb do not clean functions (1 ms) [ok]: FUNCTION - test function dump and restore (1 ms) [ok]: FUNCTION - test function dump and restore with flush argument (1 ms) [ok]: HGETEX PXAT on more then 1 field (4 ms) [ok]: FUNCTION - test function dump and restore with append argument (1 ms) [ok]: Quicklist: SORT BY hash field (18 ms) [ok]: FUNCTION - test function dump and restore with replace argument (2 ms) [ok]: HGETEX PXAT -> PERSIST (3 ms) [ok]: HGETEX PXAT on non-exist field (0 ms) [ok]: HGETEX PXAT on non-exist key (0 ms) [ok]: HGETEX PXAT with duplicate field names (0 ms) [ok]: FUNCTION - test function restore with bad payload do not drop existing functions (1 ms) [ok]: FUNCTION - test function restore with wrong number of arguments (0 ms) [ok]: HGETEX PXAT overwrites existing field TTL with bigger value (1 ms) [ok]: FUNCTION - test fcall_ro with write command (0 ms) [ok]: HGETEX PXAT overwrites existing field TTL with smaller value (1 ms) [ok]: FUNCTION - test fcall_ro with read only commands (0 ms) [ok]: FUNCTION - test keys and argv (1 ms) [ok]: FUNCTION - test command get keys on fcall (0 ms) [ok]: FUNCTION - test command get keys on fcall_ro (0 ms) [ok]: HGETEX EX overwrites existing field TTL with bigger value (1 ms) [ok]: HGETEX EX overwrites existing field TTL with smaller value (0 ms) [ok]: HGETEX PX overwrites existing field TTL with bigger value (0 ms) [ok]: HGETEX PX overwrites existing field TTL with smaller value (0 ms) [ok]: HGETEX EXAT overwrites existing field TTL with bigger value (1 ms) [ok]: HGETEX EXAT overwrites existing field TTL with smaller value (0 ms) [ok]: HGETEX PXAT overwrites existing field TTL with bigger value (0 ms) [ok]: HGETEX PXAT overwrites existing field TTL with smaller value (0 ms) [ok]: HGETEX - verify no change when field does not exist (1 ms) [ok]: HGETEX EX- multiple options used (EX + PX) (0 ms) [ok]: HGETEX EXAT- multiple options used (EXAT + PXAT) (0 ms) [ok]: HGETEX EX- missing TTL value (0 ms) [ok]: HGETEX EX- negative TTL (0 ms) [ok]: HGETEX EX- non-integer TTL (1 ms) [ok]: HGETEX EX- missing FIELDS keyword (0 ms) [ok]: HGETEX EX- wrong numfields count (too few fields) (0 ms) [ok]: HGETEX EX- wrong numfields count (too many fields) (0 ms) [ok]: HGETEX EX- key is wrong type (string instead of hash) (0 ms) [ok]: HGETEX EX with FIELDS 0 (1 ms) [ok]: HGETEX EX with negative numfields (0 ms) [ok]: HGETEX EX with missing key (0 ms) [ok]: HGETEX PX- missing TTL value (0 ms) [ok]: HGETEX PX- negative TTL (0 ms) [ok]: HGETEX PX- non-integer TTL (0 ms) [ok]: HGETEX PX- missing FIELDS keyword (0 ms) [ok]: ACL GETUSER provides reasonable results (13 ms) [ok]: HGETEX PX- wrong numfields count (too few fields) (1 ms) [ok]: HGETEX PX- wrong numfields count (too many fields) (0 ms) [ok]: HGETEX PX- key is wrong type (string instead of hash) (0 ms) [ok]: HGETEX PX with FIELDS 0 (0 ms) [ok]: HGETEX PX with negative numfields (0 ms) [ok]: HGETEX PX with missing key (0 ms) [ok]: HGETEX EXAT- missing TTL value (1 ms) [ok]: HGETEX EXAT- negative TTL (0 ms) [ok]: HGETEX EXAT- non-integer TTL (0 ms) [ok]: HGETEX EXAT- missing FIELDS keyword (0 ms) [ok]: HGETEX EXAT- wrong numfields count (too few fields) (0 ms) [ok]: HGETEX EXAT- wrong numfields count (too many fields) (0 ms) [ok]: HGETEX EXAT- key is wrong type (string instead of hash) (1 ms) [ok]: HGETEX EXAT with FIELDS 0 (0 ms) [ok]: HGETEX EXAT with negative numfields (0 ms) [ok]: HGETEX EXAT with missing key (0 ms) [ok]: HGETEX PXAT- missing TTL value (0 ms) [ok]: HGETEX PXAT- negative TTL (0 ms) [ok]: HGETEX PXAT- non-integer TTL (1 ms) [ok]: HGETEX PXAT- missing FIELDS keyword (0 ms) [ok]: HGETEX PXAT- wrong numfields count (too few fields) (0 ms) [ok]: HGETEX PXAT- wrong numfields count (too many fields) (0 ms) [ok]: HGETEX PXAT- key is wrong type (string instead of hash) (0 ms) [ok]: HGETEX PXAT with FIELDS 0 (0 ms) [ok]: HGETEX PXAT with negative numfields (0 ms) [ok]: HGETEX PXAT with missing key (0 ms) [ok]: ACL GETUSER provides correct results (6 ms) [ok]: ACL CAT with illegal arguments (0 ms) [ok]: ACL CAT without category - list all categories (0 ms) [ok]: ACL CAT category - list all commands/subcommands that belong to category (4 ms) [ok]: ACL requires explicit permission for scripting for EVAL_RO, EVALSHA_RO and FCALL_RO (5 ms) [ok]: ACL #5998 regression: memory leaks adding / removing subcommands (0 ms) [ok]: client evicted due to large argv (49 ms) [ok]: ACL LOG aggregates similar errors together and assigns unique entry-id to new errors (10 ms) [ok]: ACL LOG shows failed command executions at toplevel (1 ms) [ok]: ACL LOG shows failed subcommand executions at toplevel (1 ms) [ok]: ACL LOG is able to test similar events (1 ms) [ok]: ACL LOG is able to log keys access violations and key name (0 ms) [ok]: ACL LOG is able to log channel access violations and channel name (1 ms) [ok]: ACL LOG RESET is able to flush the entries in the log (1 ms) [ok]: ACL LOG can distinguish the transaction context (1) (0 ms) [ok]: ACL LOG can distinguish the transaction context (2) (1 ms) [ok]: ACL can log errors in the context of Lua scripting (1 ms) [ok]: ACL LOG can accept a numerical argument to show less entries (2 ms) [ok]: ACL LOG can log failed auth attempts (0 ms) [ok]: ACLLOG - zero max length is correctly handled (1 ms) [ok]: ACL LOG entries are limited to a maximum amount (1 ms) [ok]: ACL LOG entries are still present on update of max len config (1 ms) [ok]: When default user is off, new connections are not authenticated (1 ms) [ok]: When default user has no command permission, hello command still works for other users (0 ms) [ok]: When an authentication chain is used in the HELLO cmd, the last auth cmd has precedence (5 ms) [ok]: RESTORE should not store key that are already expired, with REPLACE will propagate it as DEL or UNLINK (84 ms) [ok]: RESTORE key with future RDB version, strict version check (1 ms) [ok]: When a setname chain is used in the HELLO cmd, the last setname cmd has precedence (1 ms) [ok]: RESTORE key with future RDB version, relaxed version check (0 ms) [ok]: DUMP of non existing key returns nil (0 ms) [ok]: When authentication fails in the HELLO cmd, the client setname should not be applied (0 ms) [ok]: ACL HELP should not have unexpected options (1 ms) [ok]: Delete a user that the client doesn't use (0 ms) [ok]: Delete a user that the client is using (1 ms) [ok]: ACL GENPASS command failed test (0 ms) [ok]: Default user can not be removed (0 ms) [ok]: ACL load non-existing configured ACL file (0 ms) [ok]: client evicted due to large query buf (28 ms) [ok]: ACL-Metrics user AUTH failure (6 ms) [ok]: client evicted due to percentage of maxmemory (7 ms) [ok]: ACL-Metrics invalid command accesses (5 ms) [ok]: ACL-Metrics invalid key accesses (4 ms) [ok]: ACL-Metrics invalid channels accesses (8 ms) [ok]: client evicted due to large multi buf (105 ms) [ok]: MIGRATE is caching connections (124 ms) [ok]: HGETEX EX generates hexpire keyspace notification (3 ms) [ok]: HGETEX EX with multiple fields generates single notification (3 ms) [ok]: HGETEX EX on non-existent field generates no notification (2 ms) [ok]: HGETEX PX generates hexpire keyspace notification (2 ms) [ok]: HGETEX PX with multiple fields generates single notification (1 ms) [ok]: HGETEX PX on non-existent field generates no notification (3 ms) [ok]: HGETEX EXAT generates hexpire keyspace notification (5 ms) [ok]: HGETEX EXAT with multiple fields generates single notification (4 ms) [ok]: HGETEX EXAT on non-existent field generates no notification (1 ms) [ok]: HGETEX PXAT generates hexpire keyspace notification (1 ms) [ok]: HGETEX PXAT with multiple fields generates single notification (2 ms) [ok]: HGETEX PXAT on non-existent field generates no notification (1 ms) [ok]: HGETEX PERSIST generates hpersist keyspace notification (2 ms) [ok]: HGETEX EX 0/past time works correctly with 1 field (3 ms) [ok]: HGETEX PX 0/past time works correctly with 1 field (2 ms) [ok]: HGETEX EXAT 0/past time works correctly with 1 field (2 ms) [ok]: HGETEX PXAT 0/past time works correctly with 1 field (3 ms) [ok]: HSETEX KEEPTTL - preserves existing TTL of field (1 ms) [ok]: HSETEX EX - FIELDS 0 returns error (0 ms) [ok]: HSETEX EX - test negative ttl (0 ms) [ok]: HSETEX EX - test non-numeric ttl (0 ms) [ok]: HSETEX EX - overwrite field resets TTL (1 ms) [ok]: Memory efficiency with values in range 32 (265 ms) [ok]: default: load from include file, can access any channels (1 ms) [ok]: default: with config acl-pubsub-default allchannels after reset, can access any channels (0 ms) [ok]: default: with config acl-pubsub-default resetchannels after reset, can not access any channels (0 ms) [ok]: Alice: can execute all command (1 ms) [ok]: Bob: just execute @set and acl command (0 ms) [ok]: ACL LOAD only disconnects affected clients (2 ms) [ok]: ACL LOAD disconnects clients of deleted users (1 ms) [ok]: ACL load and save (3 ms) [ok]: ACL load and save with restricted channels (3 ms) [ok]: Validate a user can remove their own channel permissions (2 ms) [ok]: ACL LOAD does not crash server if current user is removed from ACL file (3 ms) [ok]: client evicted due to watched key list (149 ms) [ok]: HyperLogLog self test passes (383 ms) [ok]: PFADD without arguments creates an HLL value (1 ms) [ok]: Approximated cardinality after creation is zero (0 ms) [ok]: PFADD returns 1 when at least 1 reg was modified (0 ms) [ok]: PFADD returns 0 when no reg was modified (0 ms) [ok]: PFADD works with empty string (regression) (1 ms) [ok]: PFCOUNT returns approximated cardinality of set (0 ms) [ok]: FUNCTION - test function kill (404 ms) [ok]: Memory efficiency with values in range 64 (261 ms) [ok]: Default user has access to all channels irrespective of flag (5 ms) [ok]: Update acl-pubsub-default, existing users shouldn't get affected (1 ms) [ok]: Single channel is valid (1 ms) [ok]: Single channel is not valid with allchannels (0 ms) [ok]: FUZZ stresser with data model binary (602 ms) [ok]: verify reply buffer limits (658 ms) [ok]: HyperLogLogs are promote from sparse to dense (281 ms) [ok]: Change hll-sparse-max-bytes (0 ms) [ok]: Hyperloglog promote to dense well in different hll-sparse-max-bytes (24 ms) [1/141 done]: unit/replybufsize (1 seconds) Testing unit/aofrw [ok]: Only default user has access to all channels irrespective of flag (1 ms) [ok]: Memory efficiency with values in range 128 (262 ms) [ok]: FUNCTION - test script kill not working on function (407 ms) [ok]: CLIENT LIST with multiple filters (1007 ms) [ok]: CLIENT LIST with IP filter (1 ms) [ok]: default: load from config file, without channel permission default user can't access any channels (5 ms) [ok]: CLIENT LIST with IPv6 filter (1 ms) [ok]: DEL against expired key (1101 ms) [ok]: EXISTS (0 ms) [ok]: Zero length value in key. SET/GET/EXISTS (0 ms) [ok]: Commands pipelining (1 ms) [ok]: Non existing command (0 ms) [ok]: RENAME basic usage (0 ms) [ok]: RENAME source key should no longer exist (0 ms) [ok]: RENAME against already existing key (0 ms) [ok]: RENAMENX basic usage (1 ms) [ok]: RENAMENX against already existing key (0 ms) [ok]: RENAMENX against already existing key (2) (0 ms) [ok]: RENAME against non existing source key (1 ms) [ok]: RENAME where source and dest key are the same (existing) (0 ms) [ok]: RENAMENX where source and dest key are the same (existing) (0 ms) [ok]: RENAME where source and dest key are the same (non existing) (0 ms) [ok]: RENAME with volatile key, should move the TTL as well (1 ms) [ok]: RENAME with volatile key, should not inherit TTL of target key (1 ms) [ok]: DEL all keys again (DB 0) (1 ms) [ok]: DEL all keys again (DB 1) (0 ms) [ok]: COPY basic usage for string (1 ms) [ok]: COPY for string does not replace an existing key without REPLACE option (0 ms) [ok]: COPY for string can replace an existing key with REPLACE option (1 ms) [ok]: COPY for string ensures that copied data is independent of copying data (6 ms) [ok]: COPY for string does not copy data to no-integer DB (0 ms) [ok]: COPY can copy key expire metadata as well (0 ms) [ok]: COPY does not create an expire if it does not exist (1 ms) [ok]: FUZZ stresser with data model alpha (524 ms) [ok]: HyperLogLog sparse encoding stress test (459 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Additional at tail (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Broken magic (0 ms) [ok]: Corrupted sparse HyperLogLogs are detected: Invalid encoding (0 ms) [ok]: Corrupted dense HyperLogLogs are detected: Wrong length (1 ms) [ok]: CLIENT LIST with CAPA filter (10 ms) [ok]: CLIENT KILL with IP filter (2 ms) [ok]: COPY basic usage for list - quicklist (46 ms) [ok]: COPY basic usage for list - listpack (2 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (1 ms) [ok]: COPY basic usage for $type set (25 ms) [ok]: COPY basic usage for listpack sorted set (1 ms) [ok]: COPY basic usage for skiplist sorted set (12 ms) [ok]: COPY basic usage for listpack hash (1 ms) [ok]: default: load from config file with all channels permissions (2 ms) [ok]: COPY basic usage for hashtable hash (18 ms) [ok]: FUNCTION - test function kill not working on eval (410 ms) [ok]: FUNCTION - test function flush (3 ms) [ok]: CLIENT LIST with IPv6 filter (1 ms) [ok]: FUNCTION - test function flush will re-create the lua engine (30 ms) [ok]: Memory efficiency with values in range 1024 (509 ms) [ok]: COPY basic usage for stream (128 ms) [ok]: COPY basic usage for stream-cgroups (10 ms) [ok]: MOVE basic usage (0 ms) [ok]: MOVE against key existing in the target DB (0 ms) [ok]: MOVE against non-integer DB (#1428) (0 ms) [ok]: MOVE can move key expire metadata as well (0 ms) [ok]: MOVE does not create an expire if it does not exist (0 ms) [ok]: SET/GET keys in different DBs (1 ms) [ok]: RANDOMKEY (3 ms) [ok]: RANDOMKEY against empty DB (0 ms) [ok]: RANDOMKEY regression 1 (0 ms) [ok]: KEYS * two times with long key, Github issue #1208 (0 ms) [ok]: Regression for pattern matching long nested loops (0 ms) [ok]: Coverage: basic SWAPDB test and unhappy path (1 ms) [ok]: Coverage: SWAPDB and FLUSHDB (1 ms) [ok]: HSETEX EX - test mix of expiring and persistent fields (1126 ms) [ok]: HSETEX EX - test missing TTL (1 ms) [ok]: HSETEX EX - mismatched field/value count (0 ms) [ok]: HSETEX EX 0/past time works correctly with 2 fields (3 ms) [ok]: HSETEX PX 0/past time works correctly with 2 fields (2 ms) [ok]: HSETEX EXAT 0/past time works correctly with 2 fields (2 ms) [ok]: Regression for pattern matching very long nested loops (16 ms) [ok]: HSETEX PXAT 0/past time works correctly with 2 fields (8 ms) [ok]: HSETEX PX - test negative ttl (0 ms) [ok]: HSETEX PX - test non-numeric ttl (1 ms) [ok]: HSETEX PX - overwrite field resets TTL (0 ms) [ok]: HSETEX PX - test zero ttl expires immediately (11 ms) [ok]: CLIENT KILL with CAPA filter (1 ms) [ok]: CLIENT KILL with NAME filter (0 ms) [ok]: CLIENT KILL with FLAGS filter (1 ms) [ok]: CLIENT KILL with TYPE filter (0 ms) [ok]: CLIENT KILL with multiple filters (1 ms) [ok]: HSETEX PX - test mix of expiring and persistent fields (21 ms) [ok]: HSETEX PX - test missing TTL (0 ms) [ok]: HSETEX PX - mismatched field/value count (0 ms) [ok]: HSETEX EX FNX - set only if none of the fields exist (0 ms) [ok]: HSETEX EX FXX - set only if all fields exist (1 ms) [ok]: HSETEX PX FNX - partial conflict returns 0 (0 ms) [ok]: HSETEX PX FXX - one field missing returns 0 (0 ms) [ok]: HSETEX EX - FNX and FXX conflict error (0 ms) [ok]: HSETEX EX - FXX does not create object in case key does not exist (0 ms) [ok]: Test loading an ACL file with duplicate users (21 ms) [ok]: Test loading an ACL file with duplicate default user (20 ms) [ok]: Test loading duplicate users in config on startup (11 ms) [ok]: HSETEX is not replicating validation arguments (77 ms) [ok]: HEXPIRE - set TTL on existing field (0 ms) [ok]: HEXPIRE - TTL 0 deletes field (2 ms) [ok]: HEXPIRE - negative TTL returns error (0 ms) [ok]: HEXPIRE - wrong type key returns error (0 ms) [ok]: HEXPIRE NX - only set when field has no TTL (0 ms) [ok]: HEXPIRE XX - only set when field has TTL (0 ms) [ok]: HEXPIRE GT - only set if new TTL > existing TTL (12 ms) [ok]: HEXPIRE GT - Do not expire items when expiration in the past (0 ms) [ok]: HEXPIRE LT - only set if new TTL < existing TTL (1 ms) [ok]: FUZZ stresser with data model compr (424 ms) [ok]: FLUSHALL should not reset the dirty counter if we disable save (1 ms) [ok]: FLUSHALL should reset the dirty counter to 0 if we enable save (16 ms) [ok]: client evicted due to pubsub subscriptions (1597 ms) [ok]: BGSAVE (84 ms) [ok]: SELECT an out of range DB (5 ms) [ok]: ACL from config file and config rewrite (320 ms) [ok]: client evicted due to tracking redirection (73 ms) [ok]: Big Quicklist: SORT BY key (667 ms) [ok]: Big Quicklist: SORT BY key with limit (9 ms) [ok]: HEXPIRE - refresh TTL with new value (596 ms) [ok]: HEXPIRE on a non-existent field (should not create field) (9 ms) [ok]: HEXPIRE on a non-existent field (should not issue notifications) (10 ms) [ok]: HEXPIRE - conflicting conditions error (0 ms) [ok]: HEXPIRE - missing FIELDS error (0 ms) [ok]: HEXPIRE - no fields after FIELDS keyword (1 ms) [ok]: HEXPIRE - non-integer TTL error (0 ms) [ok]: HEXPIRE - non-existing key returns -2 (0 ms) [ok]: HEXPIRE EX - set TTL on multiple fields (13 ms) [ok]: HEXPIRE returns -2 on non-existing key (0 ms) [ok]: ACL still denies individual renamed commands (1 ms) [ok]: HEXPIRE - GT condition fails when field has no TTL (0 ms) [ok]: ACL command classes aren't affected by command renaming (1 ms) [ok]: HEXPIRE - LT condition succeeds when field has no TTL (1 ms) [ok]: ACL GETUSER provides correct results when commands renamed (2 ms) [ok]: HSETEX HEXPIRE 0/past time works correctly with 1 field (2 ms) [ok]: HSETEX HPEXPIRE 0/past time works correctly with 1 field (4 ms) [ok]: HSETEX HEXPIREAT 0/past time works correctly with 1 field (1 ms) [ok]: HSETEX HPEXPIREAT 0/past time works correctly with 1 field (11 ms) [ok]: HTTL - persistent field returns -1 (0 ms) [ok]: HTTL - non-existent field returns -2 (0 ms) [ok]: HTTL - non-existent key returns -2 (0 ms) [ok]: HEXPIREAT - set absolute expiry on field (0 ms) [ok]: HEXPIREAT - timestamp in past deletes field immediately (1 ms) [ok]: HEXPIREAT - set TTL on multiple fields (existing + non-existing) (0 ms) [ok]: HEXPIREAT NX - only set when field has no TTL (1 ms) [ok]: HEXPIREAT XX - only set when field has TTL (0 ms) [ok]: HEXPIREAT GT - only set if new expiry > existing (11 ms) [ok]: HEXPIREAT LT - only set if new expiry < existing (0 ms) [ok]: HEXPIREAT - refresh TTL with new future timestamp (0 ms) [ok]: HEXPIREAT - TTL is accurate via HEXPIRETIME (0 ms) [ok]: HEXPIREAT - conflicting options error (1 ms) [ok]: HEXPIREAT - missing FIELDS keyword (0 ms) [ok]: HEXPIREAT - no fields after FIELDS (0 ms) [ok]: HEXPIREAT - non-integer timestamp (0 ms) [ok]: HEXPIREAT - non-existing key returns -2 (0 ms) [ok]: HEXPIRETIME - returns expiry timestamp for single field with TTL (0 ms) [ok]: HEXPIRETIME - field has no TTL returns -1 (1 ms) [ok]: HEXPIRETIME - field does not exist returns -2 (0 ms) [ok]: HEXPIRETIME - key does not exist returns -2 (0 ms) [ok]: HEXPIRETIME - multiple fields mixed cases (0 ms) [ok]: HEXPIRETIME - no FIELDS keyword (1 ms) [ok]: HEXPIRETIME - FIELDS 0 (0 ms) [ok]: HEXPIRETIME - wrong FIELDS count (1 ms) [ok]: HEXPIRETIME - wrong type key (0 ms) [ok]: HPEXPIREAT - set absolute expiry with ms precision (0 ms) [ok]: HPEXPIREAT - past timestamp deletes field immediately (0 ms) [ok]: HPEXPIREAT - non-existent key returns -2 (1 ms) [ok]: HPEXPIREAT - mixed fields (0 ms) [ok]: HPEXPIREAT - GT and LT options with success and failure cases (0 ms) [ok]: HPEXPIREAT - invalid inputs (1 ms) [ok]: HPEXPIRETIME - check with multiple fields (0 ms) [ok]: HPERSIST - field does not exist (0 ms) [ok]: HPERSIST - key does not exist (0 ms) [ok]: HPERSIST - field exists but no expiration (1 ms) [ok]: HPERSIST - field exists with expiration (0 ms) [ok]: HPERSIST - multiple fields with mixed state (0 ms) [ok]: HPERSIST, then HEXPIRE, check new TTL is set (1 ms) [ok]: HRANDFIELD - CASE 1: negative count (108 ms) [ok]: Test ACL LOAD works on primary (18 ms) [ok]: CLIENT KILL with multiple filters including idle time (1004 ms) [ok]: CLIENT LIST with NOT-NAME filter (2 ms) [ok]: CLIENT LIST with NOT-FLAGS filter (7 ms) [ok]: CLIENT LIST with NOT-TYPE filter (1 ms) [ok]: CLIENT LIST with multiple negative filters (0 ms) [ok]: HRANDFIELD - CASE 2: The number of requested elements is greater than the number of elements inside the hash (128 ms) [ok]: CLIENT LIST with multiple id filters (1 ms) [ok]: CLIENT KILL with multiple id filters (0 ms) [ok]: HRANDFIELD - CASE 3: The number of elements inside the hash is not greater than 3 times the number of requested elements (110 ms) [ok]: HRANDFIELD - CASE 4: The number of elements inside the hash is greater than 3 times the number of requested elements (110 ms) [ok]: HRANDFIELD - returns null response when all fields are expired (104 ms) [ok]: RENAME Preserves Field TTLs (2 ms) [ok]: RESTORE Preserves Field TTLs (2 ms) [ok]: COPY Preserves TTLs (1 ms) [ok]: Hash Encoding Transitions with TTL - Add TTL to Existing Fields (0 ms) [ok]: query buffer resized correctly (2951 ms) [ok]: query buffer resized correctly when not idle (29 ms) [ok]: TTL, TYPE and EXISTS do not alter the last access time of a key (3048 ms) [ok]: Hash Encoding Transitions with TTL - Create New Fields with TTL (313 ms) [ok]: Big Quicklist: SORT BY hash field (973 ms) [ok]: HGETALL skips expired fields (11 ms) [ok]: HSCAN skips expired fields (11 ms) [ok]: MOVE preserves field TTLs (0 ms) [ok]: Intset: SORT BY key (0 ms) [ok]: Intset: SORT BY key with limit (0 ms) [ok]: Intset: SORT BY hash field (0 ms) [ok]: HSET - overwrite expired field without TTL clears expiration (101 ms) [ok]: Check consistency of different data types after a reload (1286 ms) [ok]: Hash table: SORT BY key (13 ms) [ok]: Hash table: SORT BY key with limit (3 ms) [ok]: Hash table: SORT BY hash field (26 ms) [ok]: HINCRBY - on expired field (101 ms) [ok]: Test latency events logging (3407 ms) [ok]: LATENCY HISTORY output is ok (1 ms) [ok]: LATENCY LATEST output is ok (0 ms) [ok]: HINCRBYFLOAT - on expired field (128 ms) [ok]: LATENCY GRAPH can output the event graph (0 ms) [ok]: HSET - overwrite unexpired field removes TTL (1 ms) [ok]: Same dataset digest if saving/reloading as AOF? (186 ms) [ok]: CLIENT LIST with multiple negative filters (1002 ms) [ok]: CLIENT LIST with NOT-IP filter (0 ms) [ok]: HDEL - expired field is removed without triggering expiry logic (60 ms) [ok]: HDEL on field with TTL, then re-add and check TTL is gone (0 ms) [ok]: Test ACL LOAD works on replica (1116 ms) [ok]: CLIENT LIST with IPv6 negative filter (1 ms) [ok]: EXPIRES after a reload (snapshot + append only file rewrite) (156 ms) [ok]: expired_fields metric increments by one when single hash field expires (157 ms) [2/141 done]: unit/acl (4 seconds) Testing unit/quit [ok]: CLIENT LIST with NOT-CAPA filter (1 ms) [ok]: CLIENT KILL with NOT-IP filter (0 ms) [ok]: CLIENT KILL with NOT-CAPA filter (1 ms) [ok]: CLIENT KILL with NOT-NAME filter (0 ms) [ok]: CLIENT KILL with NOT-FLAGS filter (0 ms) [ok]: CLIENT KILL with NOT-TYPE filter (1 ms) [ok]: CLIENT KILL with multiple negative filters (0 ms) [ok]: KEYS with empty DB in cluster mode (1 ms) [ok]: KEYS with empty slot in cluster mode (0 ms) [ok]: Memory efficiency with values in range 16384 (2455 ms) [3/142 done]: unit/memefficiency (4 seconds) Testing unit/wait [ok]: QUIT returns OK (1 ms) [ok]: Pipelined commands after QUIT must not be executed (1 ms) [ok]: Pipelined commands after QUIT that exceed read buffer size (1 ms) [ok]: expired_fields metric tracks multiple field expirations with keyspace notifications (205 ms) [4/142 done]: unit/keyspace (4 seconds) Testing unit/oom-score-adj [5/142 done]: unit/quit (0 seconds) Testing unit/maxmemory [ok]: eviction due to output buffers of many MGET clients, client eviction: false (104 ms) [ok]: CONFIG SET oom-score-adj works as expected (10 ms) [ok]: CONFIG SET oom-score-adj handles configuration failures (0 ms) [ok]: CONFIG SET oom-score-adj-values doesn't touch proc when disabled (0 ms) [ok]: CONFIG SET oom score restored on disable (0 ms) [ok]: CONFIG SET oom score relative and absolute (1 ms) [ok]: CONFIG SET out-of-range oom score (0 ms) [6/142 done]: unit/oom-score-adj (1 seconds) Testing unit/scripting [ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call server (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (0 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (1 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (7 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (1 ms) [ok]: EVAL - Scripts do not block on waitaof (9 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (1 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (119 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (2 ms) [ok]: EVAL - Numerical sanity check from bitop (1 ms) [ok]: EVAL - Verify minimal bitop functionality (2 ms) [ok]: EVAL - Able to parse trailing comments (1 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (4 ms) [ok]: redis.sha1hex() implementation (5 ms) [ok]: CLIENT KILL with both positive and negative filters including idle time (1002 ms) [ok]: CLIENT LIST with illegal arguments (1 ms) [ok]: client input output and command process statistics (2 ms) [ok]: CLIENT KILL with illegal arguments (0 ms) [ok]: Key TTL expires before field TTL: entire hash should be deleted timeunit: s, (1037 ms) [ok]: Setup slave (908 ms) [ok]: WAIT out of range timeout (milliseconds) (0 ms) [ok]: WAIT should acknowledge 1 additional copy of the data (1 ms) [ok]: FUNCTION - test loading function during the flush async (4217 ms) [ok]: FUNCTION - test function wrong argument (0 ms) [ok]: Measures elapsed time os.clock() (1051 ms) [ok]: Prohibit dangerous lua methods in sandbox (2 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (4 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (2 ms) [ok]: EXPIRES after AOF reload (without rewrite) (2113 ms) [ok]: Big Hash table: SORT BY key (519 ms) [ok]: Big Hash table: SORT BY key with limit (10 ms) [ok]: Field TTL expires before key TTL: only the specific field should expire: s, (1005 ms) [ok]: LATENCY GRAPH can output the expire event graph (0 ms) [ok]: LATENCY of expire events are correctly collected (2496 ms) [ok]: LATENCY HISTORY / RESET with wrong event name is fine (0 ms) [ok]: LATENCY DOCTOR produces some output (0 ms) [ok]: LATENCY RESET is able to reset events (4 ms) [ok]: LATENCY HELP should not have unexpected options (0 ms) [ok]: query buffer resized correctly with fat argv (2969 ms) [7/142 done]: unit/querybuf (7 seconds) Testing unit/acl-v2 [ok]: Test basic multiple selectors (1 ms) [ok]: Test ACL selectors by default have no permissions (1 ms) [ok]: Test deleting selectors (1 ms) [ok]: Test selector syntax error reports the error in the selector context (1 ms) [ok]: Test flexible selector definition (1 ms) [ok]: Test separate read permission (1 ms) [ok]: Test separate write permission (1 ms) [ok]: Test separate read and write permissions (0 ms) [ok]: Validate read and write permissions format (1 ms) [ok]: Validate key permissions format - empty and omitted pattern (1 ms) [ok]: Test separate read and write permissions on different selectors are not additive (1 ms) [ok]: Test SET with separate read permission (1 ms) [ok]: Test SET with separate write permission (1 ms) [ok]: Test SET with read and write permissions (1 ms) [ok]: Test BITFIELD with separate read permission (1 ms) [ok]: Test BITFIELD with separate write permission (1 ms) [ok]: Test BITFIELD with read and write permissions (1 ms) [ok]: Test ACL log correctly identifies the relevant item when selectors are used (2 ms) [ok]: Test ACL GETUSER response information (1 ms) [ok]: Test ACL list idempotency (1 ms) [ok]: Test R+W is the same as all permissions (13 ms) [ok]: Test basic dry run functionality (0 ms) [ok]: Test various commands for command permissions (1 ms) [ok]: Test various odd commands for key permissions (6 ms) [ok]: Existence test commands are not marked as access (4 ms) [ok]: Intersection cardinaltiy commands are access commands (1 ms) [ok]: Test general keyspace commands require some type of permission to execute (1 ms) [ok]: Cardinality commands require some type of permission to execute (2 ms) [ok]: Test sharded channel permissions (0 ms) [ok]: Test sort with ACL permissions (2 ms) [ok]: Test DRYRUN with wrong number of arguments (0 ms) [ok]: TOUCH alters the last access time of a key (3002 ms) [ok]: Test behavior of loading ACLs (4 ms) [ok]: WAIT should not acknowledge 2 additional copies of the data (1051 ms) [ok]: EVAL does not leak in the Lua stack (619 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (2 ms) [ok]: Number conversion precision test (issue #1118) (2 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (3 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [8/142 done]: unit/acl-v2 (0 seconds) Testing unit/bitops [ok]: PIPELINING stresser (also a regression for the old epoll bug) (579 ms) [ok]: APPEND basics (9 ms) [ok]: APPEND basics, integer encoded values (0 ms) [ok]: Script return recursive object (99 ms) [ok]: Script check unpack with massive arguments (22 ms) [ok]: Script read key with expiration set (0 ms) [ok]: Script del key with expiration set (1 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (1 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (1 ms) [ok]: Try trick readonly table on valkey table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (1 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: BITCOUNT against wrong type (3 ms) [ok]: BITCOUNT returns 0 against non existing key (0 ms) [ok]: BITCOUNT returns 0 with out of range indexes (1 ms) [ok]: BITCOUNT returns 0 with negative indexes where start > end (0 ms) [ok]: BITCOUNT against test vector #1 (0 ms) [ok]: BITCOUNT against test vector #2 (1 ms) [ok]: BITCOUNT against test vector #3 (0 ms) [ok]: BITCOUNT against test vector #4 (0 ms) [ok]: BITCOUNT against test vector #5 (0 ms) [ignore]: large memory flag not provided [ok]: Big Hash table: SORT BY hash field (492 ms) [ok]: SORT GET # (1 ms) [ok]: SORT GET (1 ms) [ok]: SORT_RO GET (1 ms) [ok]: SORT GET (key and hash) with sanity check (8 ms) [ok]: SORT BY key STORE (6 ms) [ok]: SORT BY hash field STORE (1 ms) [ok]: SORT extracts STORE correctly (0 ms) [ok]: SORT_RO get keys (0 ms) [ok]: SORT extracts multiple STORE correctly (0 ms) [ok]: SORT DESC (1 ms) [ok]: SORT ALPHA against integer encoded strings (0 ms) [ok]: SORT sorted set (0 ms) [ok]: SORT sorted set BY nosort should retain ordering (2 ms) [ok]: SORT sorted set BY nosort + LIMIT (1 ms) [ok]: SORT sorted set BY nosort works as expected from scripts (1 ms) [ok]: SORT sorted set: +inf and -inf handling (2 ms) [ok]: SORT regression for issue #19, sorting floats (4 ms) [ok]: SORT with STORE returns zero if result is empty (github issue 224) (0 ms) [ok]: SORT with STORE does not create empty lists (github issue 224) (1 ms) [ok]: SORT with STORE removes key if result is empty (github issue 227) (0 ms) [ok]: SORT with BY and STORE should still order output (1 ms) [ok]: SORT will complain with numerical sorting and bad doubles (1) (0 ms) [ok]: SORT will complain with numerical sorting and bad doubles (2) (0 ms) [ok]: SORT BY sub-sorts lexicographically if score is the same (2 ms) [ok]: SORT GET with pattern ending with just -> does not get hash field (1 ms) [ok]: SORT by nosort retains native order for lists (0 ms) [ok]: SORT by nosort plus store retains native order for lists (1 ms) [ok]: SORT by nosort with limit returns based on original list order (0 ms) [ok]: SORT_RO - Successful case (1 ms) [ok]: SORT_RO - Cannot run with STORE arg (0 ms) [ok]: SORT speed, 100 element list BY key, 100 times (17 ms) [ok]: SORT speed, 100 element list BY hash field, 100 times (19 ms) [ok]: SORT speed, 100 element list directly, 100 times (10 ms) [ok]: SORT speed, 100 element list BY , 100 times (8 ms) [ok]: SETRANGE with huge offset (2 ms) [ok]: SORT STORE quicklist with the right options (57 ms) [ok]: BITCOUNT fuzzing without start/end (240 ms) [ok]: Connect a replica to the master instance (819 ms) [ok]: FUNCTION - creation is replicated to replica (0 ms) [ok]: FUNCTION - call on replica (0 ms) [ok]: FUNCTION - restore is replicated to replica (1 ms) [ok]: FUNCTION - delete is replicated to replica (0 ms) [ok]: FUNCTION - flush is replicated to replica (1 ms) [ok]: APPEND fuzzing (399 ms) [ok]: FLUSHDB (1 ms) [ok]: CLIENT KILL maxAGE will kill old clients (2002 ms) [ok]: CLIENT KILL SKIPME YES/NO will kill all clients (1 ms) [ok]: CLIENT command unhappy path coverage (1 ms) [ok]: Perform a final SAVE to leave a clean DB on disk (12 ms) [ok]: RESET clears client state (1 ms) [ok]: RESET clears MONITOR state (1 ms) [ok]: RESET clears and discards MULTI state (0 ms) [ok]: RESET clears Pub/Sub state (0 ms) [ok]: RESET clears authenticated state (1 ms) [ok]: Subcommand syntax error crash (issue #10070) (0 ms) [ok]: Extended Redis Compatibility config (3 ms) [ok]: CLIENT KILL close the client connection during bgsave (99 ms) [ok]: CLIENT REPLY OFF/ON: disable all commands reply (49 ms) [ok]: CLIENT REPLY SKIP: skip the next command reply (59 ms) [ok]: Key and field TTL expire simultaneously: entire hash should be deleted: s, (1007 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (411 ms) [ok]: BITCOUNT fuzzing with start/end (357 ms) [ok]: BITCOUNT with just start (2 ms) [ok]: BITCOUNT with start, end (1 ms) [ok]: BITCOUNT with illegal arguments (2 ms) [ok]: BITCOUNT against non-integer value (0 ms) [ok]: BITCOUNT regression test for github issue #582 (0 ms) [ok]: BITCOUNT misaligned prefix (1 ms) [ok]: BITCOUNT misaligned prefix + full words + remainder (0 ms) [ok]: BITOP NOT (empty string) (0 ms) [ok]: BITOP NOT (known string) (0 ms) [ok]: BITOP where dest and target are the same key (0 ms) [ok]: BITOP AND|OR|XOR don't change the string with single input key (1 ms) [ok]: BITOP missing key is considered a stream of zero (0 ms) [ok]: BITOP shorter keys are zero-padded to the key with max length (0 ms) [ok]: CLIENT REPLY ON: unset SKIP flag (60 ms) [ok]: MONITOR can log executed commands (1 ms) [ok]: MONITOR properly escapes special characters through sdscatrepr (0 ms) [ok]: MONITOR can log commands issued by the scripting engine (1 ms) [ok]: MONITOR can log commands issued by functions (0 ms) [ok]: MONITOR supports redacting command arguments (3 ms) [ok]: MONITOR correctly handles multi-exec cases (1 ms) [ok]: MONITOR correctly records SET EX in MULTI-EXEC (0 ms) [ok]: MONITOR log blocked command only once (1 ms) [ok]: CLIENT GETNAME should return NIL if name is not assigned (0 ms) [ok]: CLIENT GETNAME check if name set correctly (0 ms) [ok]: CLIENT LIST shows empty fields for unassigned names (0 ms) [ok]: CLIENT SETNAME does not accept spaces (0 ms) [ok]: CLIENT SETNAME can assign a name to this connection (0 ms) [ok]: CLIENT SETNAME can change the name of an existing connection (0 ms) [ok]: After CLIENT SETNAME, connection can still be closed (0 ms) [ok]: CLIENT SETINFO can set a library name to this connection (1 ms) [ok]: CLIENT SETINFO invalid args (0 ms) [ok]: RESET does NOT clean library name (0 ms) [ok]: CLIENT SETINFO can clear library name (0 ms) [ok]: CONFIG GET should return sorted output (3 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (130 ms) [ok]: BITOP and fuzzing (221 ms) [ok]: Don't rehash if server has child process (345 ms) [ok]: WAIT should not acknowledge 1 additional copy if slave is blocked (1103 ms) [ok]: Timedout script does not cause a false dead client (221 ms) [ok]: BITOP or fuzzing (134 ms) [ok]: Process title set as expected (6 ms) [ok]: Timedout script link is still usable after Lua returns (50 ms) [ok]: BITOP xor fuzzing (201 ms) [ok]: BITOP NOT fuzzing (35 ms) [ok]: BITOP with integer encoded source objects (6 ms) [ok]: BITOP with non string source key (6 ms) [ok]: BITOP with empty string after non empty string (issue #529) (3 ms) [ok]: BITPOS against wrong type (1 ms) [ok]: BITPOS will illegal arguments (1 ms) [ok]: Timedout scripts and unblocked command (236 ms) [ok]: BITPOS against non-integer value (11 ms) [ok]: BITPOS bit=0 with empty key returns 0 (1 ms) [ok]: BITPOS bit=1 with empty key returns -1 (5 ms) [ok]: eviction due to input buffer of a dead client, client eviction: false (3459 ms) [ok]: BITPOS bit=0 with string less than 1 word works (5 ms) [ok]: BITPOS bit=1 with string less than 1 word works (2 ms) [ok]: BITPOS bit=0 starting at unaligned address (3 ms) [ok]: BITPOS bit=1 starting at unaligned address (0 ms) [ok]: BITPOS bit=0 unaligned+full word+reminder (15 ms) [ok]: BITPOS bit=1 unaligned+full word+reminder (23 ms) [ok]: BITPOS bit=1 returns -1 if string is all 0 bits (3 ms) [ok]: BITPOS bit=0 works with intervals (0 ms) [ok]: BITPOS bit=1 works with intervals (1 ms) [ok]: BITPOS bit=0 changes behavior if end is given (0 ms) [ok]: SETBIT/BITFIELD only increase dirty when the value changed (3 ms) [ok]: Disconnecting the replica from master instance (1022 ms) [ok]: FUNCTION - test replication to replica on rdb phase (2 ms) [ok]: FUNCTION - test replication to replica on rdb phase info command (0 ms) [ok]: FUNCTION - create on read only replica (1 ms) [ok]: FUNCTION - delete on read only replica (0 ms) [ok]: FUNCTION - function effect is replicated to replica (2 ms) [ok]: FUNCTION - modify key space of read only replica (0 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (201 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (1 ms) [ok]: CONFIG save params special case handled properly (876 ms) [ok]: CONFIG sanity (45 ms) [ok]: BITPOS bit=1 fuzzy testing using SETBIT (298 ms) [ok]: eviction due to output buffers of pubsub, client eviction: false (408 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [ok]: eviction due to output buffers of many MGET clients, client eviction: true (45 ms) [ok]: CONFIG REWRITE sanity (276 ms) [ok]: WAIT implicitly blocks on client pause since ACKs aren't sent (1007 ms) [ok]: WAIT replica multiple clients unblock - reuse last result (11 ms) [ok]: BITPOS bit=0 fuzzy testing using SETBIT (379 ms) [ok]: Millisecond/Seconds precision (1503 ms) [ok]: BITPOS/BITCOUNT fuzzy testing using SETBIT (246 ms) [9/143 done]: unit/bitops (2 seconds) Testing unit/networking [ok]: sort by in cluster mode (0 ms) [ok]: sort get in cluster mode (1 ms) [ok]: sort_ro by in cluster mode (0 ms) [ok]: sort_ro get in cluster mode (0 ms) [10/143 done]: unit/sort (9 seconds) Testing unit/obuf-limits [ok]: Connect a replica to the master instance (813 ms) [ok]: Replication of script multiple pushes to list with BLPOP (2 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: CONFIG SET port number (216 ms) [ok]: CONFIG SET client-output-buffer-limit (1 ms) [ok]: CONFIG REWRITE handles save and shutdown properly (824 ms) [ok]: CONFIG SET with multiple args (1 ms) [ok]: CONFIG SET rollback on set error (0 ms) [ok]: CONFIG SET rollback on apply error (1 ms) [ok]: CONFIG SET duplicate configs (0 ms) [ok]: CONFIG SET set immutable (1 ms) [ok]: CONFIG GET hidden configs (3 ms) [ok]: CONFIG GET multiple args (1 ms) [ok]: valkey-server command line arguments - error cases (18 ms) [ok]: CONFIG SET bind address (209 ms) [ok]: TOUCH alters the last access time of a key in no-touch mode (3003 ms) [ok]: FUNCTION can processes create, delete and flush commands in AOF when doing "debug loadaof" in read-only slaves (323 ms) [ok]: LIBRARIES - test shared function can access default globals (1 ms) [ok]: LIBRARIES - usage and code sharing (1 ms) [ok]: LIBRARIES - test registration failure revert the entire load (0 ms) [ok]: LIBRARIES - test registration function name collision (3 ms) [ok]: LIBRARIES - test registration function name collision on same library (0 ms) [ok]: LIBRARIES - test registration with no argument (0 ms) [ok]: LIBRARIES - test registration with only name (0 ms) [ok]: LIBRARIES - test registration with to many arguments (0 ms) [ok]: LIBRARIES - test registration with no string name (0 ms) [ok]: LIBRARIES - test registration with wrong name format (1 ms) [ok]: LIBRARIES - test registration with empty name (0 ms) [ok]: LIBRARIES - math.random from function load (0 ms) [ok]: LIBRARIES - redis.call from function load (0 ms) [ok]: LIBRARIES - redis.setresp from function load (0 ms) [ok]: LIBRARIES - redis.set_repl from function load (1 ms) [ok]: LIBRARIES - redis.acl_check_cmd from function load (0 ms) [ok]: LIBRARIES - malicious access test (3 ms) [ok]: LIBRARIES - delete removed all functions on library (0 ms) [ok]: LIBRARIES - register function inside a function (0 ms) [ok]: LIBRARIES - register library with no functions (2 ms) [ok]: Setup a new replica (922 ms) [ok]: Key TTL expires before field TTL: entire hash should be deleted timeunit: ms (1011 ms) [ok]: tot-net-out for replica client (516 ms) [ok]: CLIENT LIST can filter by LIB-NAME (1 ms) [ok]: CLIENT LIST can filter by LIB-VER (1 ms) [ok]: CLIENT LIST can filter by DB number (1 ms) [ok]: CLIENT KILL can filter by DB (0 ms) [ok]: CLIENT KILL can filter by LIB-NAME (2 ms) [ok]: CLIENT KILL can filter by LIB-VER (1 ms) [ok]: CLIENT LIST can filter by NOT-LIB-NAME (0 ms) [ok]: CLIENT LIST can filter by NOT-LIB-VER (1 ms) [ok]: CLIENT LIST can filter by NOT-DB number (0 ms) [ok]: CLIENT KILL can filter by NOT-DB (1 ms) [ok]: CLIENT KILL can filter by NOT-LIB-NAME (5 ms) [ok]: CLIENT KILL can filter by NOT-LIB-VER (3 ms) [ok]: LIBRARIES - load timeout (501 ms) [ok]: LIBRARIES - verify global protection on the load run (0 ms) [ok]: LIBRARIES - named arguments (1 ms) [ok]: LIBRARIES - named arguments, bad function name (0 ms) [ok]: LIBRARIES - named arguments, bad callback type (0 ms) [ok]: LIBRARIES - named arguments, bad description (0 ms) [ok]: LIBRARIES - named arguments, unknown argument (0 ms) [ok]: LIBRARIES - named arguments, missing function name (0 ms) [ok]: LIBRARIES - named arguments, missing callback (0 ms) [ok]: FUNCTION - test function restore with function name collision (2 ms) [ok]: FUNCTION - test function list with code (0 ms) [ok]: FUNCTION - test function list with pattern (1 ms) [ok]: FUNCTION - test function list wrong argument (0 ms) [ok]: FUNCTION - test function list with bad argument to library name (0 ms) [ok]: FUNCTION - test function list withcode multiple times (0 ms) [ok]: FUNCTION - test function list libraryname multiple times (0 ms) [ok]: FUNCTION - verify OOM on function load and function restore (1 ms) [ok]: FUNCTION - verify allow-omm allows running any command (0 ms) [ok]: valkey-server command line arguments - allow passing option name and option value in the same arg (220 ms) [ok]: FUNCTION - wrong flags type named arguments (1 ms) [ok]: FUNCTION - wrong flag type (0 ms) [ok]: FUNCTION - unknown flag (0 ms) [ok]: FUNCTION - write script on fcall_ro (0 ms) [ok]: FUNCTION - write script with no-writes flag (1 ms) [ok]: FUNCTION - deny oom (0 ms) [ok]: FUNCTION - deny oom on no-writes function (1 ms) [ok]: FUNCTION - allow stale (1 ms) [ok]: FUNCTION - valkey version api (0 ms) [ok]: FUNCTION - function stats (1 ms) [ok]: FUNCTION - function stats reloaded correctly from rdb (4 ms) [ok]: FUNCTION - function stats delete library (1 ms) [ok]: FUNCTION - test function stats on loading failure (0 ms) [ok]: FUNCTION - function stats cleaned after flush (1 ms) [ok]: FUNCTION - function test empty engine (0 ms) [ok]: FUNCTION - function test unknown metadata value (0 ms) [ok]: FUNCTION - function test no name (0 ms) [ok]: FUNCTION - function test multiple names (0 ms) [ok]: FUNCTION - function test name with quotes (1 ms) [ok]: FUNCTION - trick global protection 1 (0 ms) [ok]: FUNCTION - test getmetatable on script load (1 ms) [ok]: valkey-server command line arguments - wrong usage that we support anyway (214 ms) [11/143 done]: unit/functions (11 seconds) Testing unit/slowlog [ok]: SLOWLOG - check that it starts with an empty log (0 ms) [ok]: Operations in no-touch mode do not alter the last access time of a key (1102 ms) [ok]: TOUCH returns the number of existing keys specified (0 ms) [ok]: command stats for GEOADD (1 ms) [ok]: errors stats for GEOADD (0 ms) [ok]: command stats for EXPIRE (1 ms) [ok]: command stats for BRPOP (1 ms) [ok]: command stats for MULTI (1 ms) [ok]: command stats for scripts (1 ms) [ok]: COMMAND COUNT get total number of commands (0 ms) [ok]: COMMAND GETKEYS GET (0 ms) [ok]: COMMAND GETKEYSANDFLAGS (1 ms) [ok]: COMMAND GETKEYS MEMORY USAGE (0 ms) [ok]: COMMAND GETKEYS XGROUP (0 ms) [ok]: COMMAND GETKEYS EVAL with keys (0 ms) [ok]: COMMAND GETKEYS EVAL without keys (0 ms) [ok]: COMMAND GETKEYS LCS (0 ms) [ok]: COMMAND GETKEYS MORE THAN 256 KEYS (2 ms) [ok]: COMMAND LIST syntax error (0 ms) [ok]: COMMAND LIST WITHOUT FILTERBY (3 ms) [ok]: COMMAND LIST FILTERBY ACLCAT against non existing category (0 ms) [ok]: COMMAND LIST FILTERBY ACLCAT - list all commands/subcommands (0 ms) [ok]: COMMAND LIST FILTERBY PATTERN - list all commands/subcommands (1 ms) [ok]: COMMAND LIST FILTERBY MODULE against non existing module (0 ms) [ok]: COMMAND INFO of invalid subcommands (0 ms) [ok]: SET command will not be marked with movablekeys (1 ms) [ok]: GET command will not be marked with movablekeys (0 ms) [ok]: MSET command will not be marked with movablekeys (0 ms) [ok]: BITFIELD command will not be marked with movablekeys (1 ms) [ok]: LMOVE command will not be marked with movablekeys (0 ms) [ok]: LPOP command will not be marked with movablekeys (0 ms) [ok]: BLPOP command will not be marked with movablekeys (1 ms) [ok]: PING command will not be marked with movablekeys (0 ms) [ok]: MEMORY command will not be marked with movablekeys (0 ms) [ok]: MEMORY|USAGE command will not be marked with movablekeys (1 ms) [ok]: RENAME command will not be marked with movablekeys (0 ms) [ok]: GEORADIUS_RO command will not be marked with movablekeys (0 ms) [ok]: ZUNIONSTORE command is marked with movablekeys (1 ms) [ok]: XREAD command is marked with movablekeys (0 ms) [ok]: EVAL command is marked with movablekeys (0 ms) [ok]: SORT command is marked with movablekeys (0 ms) [ok]: SORT_RO command is marked with movablekeys (0 ms) [ok]: MIGRATE command is marked with movablekeys (1 ms) [ok]: GEORADIUS command is marked with movablekeys (0 ms) [ok]: valkey-server command line arguments - allow option value to use the `--` prefix (213 ms) [12/143 done]: unit/introspection-2 (11 seconds) Testing unit/shutdown [ok]: WAIT in script will work (1017 ms) [ok]: SLOWLOG - only logs commands taking more time than specified (203 ms) [ok]: SLOWLOG - zero max length is correctly handled (10 ms) [ok]: SLOWLOG - max entries is correctly handled (7 ms) [ok]: SLOWLOG - GET optional argument to limit output len works (1 ms) [ok]: SLOWLOG - RESET subcommand works (0 ms) [ok]: CONFIG SET bind-source-addr (1321 ms) [ok]: valkey-server command line arguments - option name and option value in the same arg and `--` prefix (210 ms) [ok]: Field TTL expires before key TTL: only the specific field should expire: ms (1010 ms) [ok]: Temp rdb will be deleted if we use bg_unlink when shutdown (108 ms) [ok]: SLOWLOG - logged entry sanity check (201 ms) [ok]: SLOWLOG - Certain commands are omitted that contain sensitive information (3 ms) [ok]: SLOWLOG - Some commands can redact sensitive fields (0 ms) [ok]: SLOWLOG - Rewritten commands are logged as their original command (5 ms) [ok]: SLOWLOG - commands with too many arguments are trimmed (1 ms) [ok]: SLOWLOG - too long arguments are trimmed (1 ms) [ok]: SHUTDOWN ABORT can cancel SIGTERM (11 ms) [ok]: Temp rdb will be deleted in signal handle (85 ms) [ok]: WAITAOF local copy before fsync (97 ms) [ok]: WAITAOF local copy everysec (0 ms) [ok]: WAITAOF local copy with appendfsync always (3 ms) [ok]: WAITAOF local wait and then stop aof (2 ms) [ok]: WAITAOF local on server with aof disabled (1 ms) [ok]: Default bind address configuration handling (204 ms) [ok]: Protected mode works as expected (3 ms) [ok]: SLOWLOG - EXEC is not logged, just executed commands (201 ms) [ok]: Client output buffer hard limit is enforced (1903 ms) [ok]: RDB save will be failed in shutdown (2 ms) [ok]: SHUTDOWN will abort if rdb save failed on signal (96 ms) [ok]: SHUTDOWN will abort if rdb save failed on shutdown command (2 ms) [ok]: SHUTDOWN can proceed if shutdown command was with nosave (2 ms) [ok]: Clean up rdb same named folder (0 ms) [ok]: Connect a replica to the master instance (819 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (4 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (5 ms) [ok]: Test selective replication of certain commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (0 ms) [ok]: SLOWLOG - can clean older entries (200 ms) [ok]: WAITAOF local if AOFRW was postponed (301 ms) [13/143 done]: unit/networking (3 seconds) Testing unit/tracking [ok]: SHUTDOWN SIGTERM will abort if there's an initial AOFRW - default (97 ms) [ok]: WAITAOF on demoted master gets unblocked with an error (1 ms) [14/143 done]: unit/shutdown (1 seconds) Testing unit/commandlog [ok]: Server can trigger resizing (1764 ms) [ok]: eviction due to input buffer of a dead client, client eviction: true (3288 ms) [ok]: COMMANDLOG - check that it starts with an empty log (0 ms) [ok]: SLOWLOG - can be disabled (402 ms) [ok]: SLOWLOG - count must be >= -1 (0 ms) [ok]: SLOWLOG - get all slow logs (1 ms) [ok]: SLOWLOG - blocking command is reported only after unblocked (3 ms) [ok]: SLOWLOG - the commands in script are recorded normally - is_eval: 0 (1 ms) [ok]: SLOWLOG - the commands in script are recorded normally - is_eval: 1 (0 ms) [ok]: Key and field TTL expire simultaneously: entire hash should be deleted: ms (1007 ms) [15/143 done]: unit/slowlog (1 seconds) Testing unit/info [ok]: valkey-server command line arguments - save with empty input (1084 ms) [ok]: COMMANDLOG - only logs commands exceeding the threshold (205 ms) [ok]: COMMANDLOG - zero max length is correctly handled (4 ms) [ok]: COMMANDLOG - max entries is correctly handled (4 ms) [ok]: COMMANDLOG - GET optional argument to limit output len works (3 ms) [ok]: COMMANDLOG - RESET subcommand works (1 ms) [ok]: Client tracking prefixes memory overhead (445 ms) [ok]: Clients are able to enable tracking and redirect it (0 ms) [ok]: The other connection is able to get invalidations (4 ms) [ok]: The client is now able to disable tracking (0 ms) [ok]: Clients can enable the BCAST mode with the empty prefix (0 ms) [ok]: The connection gets invalidation messages about all the keys (0 ms) [ok]: Clients can enable the BCAST mode with prefixes (0 ms) [ok]: Adding prefixes to BCAST mode works (0 ms) [ok]: Tracking NOLOOP mode in standard mode works (1 ms) [ok]: Tracking NOLOOP mode in BCAST mode works (1 ms) [ok]: valkey-server command line arguments - take one bulk string with spaces for MULTI_ARG configs parsing (215 ms) [ok]: latencystats: disable/enable (3 ms) [ok]: latencystats: configure percentiles (2 ms) [ok]: latencystats: bad configure percentiles (1 ms) [ok]: latencystats: blocking commands (2 ms) [ok]: latencystats: subcommands (1 ms) [ok]: COMMANDLOG - logged entry sanity check (202 ms) [ok]: COMMANDLOG slow - Certain commands are omitted that contain sensitive information (2 ms) [ok]: COMMANDLOG slow - Some commands can redact sensitive fields (1 ms) [ok]: COMMANDLOG slow - Rewritten commands are logged as their original command (2 ms) [ok]: COMMANDLOG slow - commands with too many arguments are trimmed (1 ms) [ok]: COMMANDLOG slow - too long arguments are trimmed (1 ms) [ok]: latencystats: measure latency (51 ms) [ok]: errorstats: failed call authentication error (3 ms) [ok]: errorstats: failed call within MULTI/EXEC (2 ms) [ok]: errorstats: failed call within LUA (2 ms) [ok]: errorstats: failed call NOSCRIPT error (1 ms) [ok]: errorstats: failed call NOGROUP error (1 ms) [ok]: errorstats: rejected call unknown command (0 ms) [ok]: errorstats: rejected call within MULTI/EXEC (2 ms) [ok]: errorstats: rejected call due to wrong arity (1 ms) [ok]: errorstats: rejected call by OOM error (1 ms) [ok]: errorstats: rejected call by authorization error (2 ms) [ok]: errorstats: blocking commands (1 ms) [ok]: errorstats: limit errors will not increase indefinitely (107 ms) [ok]: Server can rewind and trigger smaller slot resizing (677 ms) [ok]: CLUSTER FORGET with invalid node ID (0 ms) [ok]: valkey-server command line arguments - dir multiple times (211 ms) [ok]: eviction due to output buffers of pubsub, client eviction: true (625 ms) [ok]: COMMANDLOG slow - EXEC is not logged, just executed commands (204 ms) [ok]: stats: eventloop metrics (113 ms) [ok]: WAITAOF replica copy before fsync (72 ms) [ok]: auth check before command existence check and command arity check (0 ms) [ok]: cannot modify protected configuration - no (0 ms) [ok]: test RESP2/2 big number protocol parsing (0 ms) [ok]: test RESP2/2 malformed big number protocol parsing (1 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (1 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (1 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (1 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (1 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (1 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: COMMANDLOG slow - can clean older entries (202 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: TIME command using cached time (10 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-random) (104 ms) [ok]: Server can resize empty dict (214 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (11 ms) [ok]: cannot modify protected configuration - local (4 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call server (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (1 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (1 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (2 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (1 ms) [ok]: EVAL - Scripts do not block on wait (2 ms) [ok]: EVAL - Scripts do not block on waitaof (3 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (1 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (1 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: COMMANDLOG slow - can be disabled (410 ms) [ok]: COMMANDLOG slow - count must be >= -1 (2 ms) [ok]: COMMANDLOG slow - get all slow logs (11 ms) [ok]: AOF rewrite during write load: RDB preamble=yes (11662 ms) [ok]: COMMANDLOG slow - blocking command is reported only after unblocked (9 ms) [ok]: COMMANDLOG slow - the commands in script are recorded normally - is_eval: 0 (0 ms) [ok]: COMMANDLOG slow - the commands in script are recorded normally - is_eval: 1 (0 ms) [ok]: Tracking gets notification of expired keys (1001 ms) [ok]: COMMANDLOG large-reply - byte tracking with copy avoidance (1 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (128 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (6 ms) [ok]: EVAL - Numerical sanity check from bitop (2 ms) [ok]: EVAL - Verify minimal bitop functionality (8 ms) [ok]: EVAL - Able to parse trailing comments (3 ms) [ok]: EVAL_RO - Successful case (5 ms) [ok]: test io-threads are runtime modifiable (201 ms) [ok]: EVAL_RO - Cannot run write commands (5 ms) [ok]: redis.sha1hex() implementation (1 ms) [16/143 done]: unit/commandlog (1 seconds) Testing unit/info-command Testing Valkey version 7.2.4 (00000000) [ok]: Extract version and sha1 details from info command and print (1 ms) [ok]: info command with at most one sub command (0 ms) [ok]: info command with one sub-section (1 ms) [ok]: info command with multiple sub-sections (0 ms) [ok]: Tracking gets notification of lazy expired keys (205 ms) [ok]: HELLO 3 reply is correct (9 ms) [ok]: RESP3 based basic invalidation (4 ms) [ok]: RESP3 tracking redirection (1 ms) [ok]: Invalidations of previous keys can be redirected after switching to RESP3 (0 ms) [ok]: Invalidations of new keys can be redirected after switching to RESP3 (1 ms) [ok]: Invalid keys should not be tracked for scripts in NOLOOP mode (1 ms) [ok]: Tracking only occurs for scripts when a command calls a read-only command (2 ms) [ok]: RESP3 Client gets tracking-redir-broken push message after cached key changed when rediretion client is terminated (1 ms) [ok]: Different clients can redirect to the same connection (0 ms) [ok]: Different clients using different protocols can track the same key (1 ms) [ok]: No invalidation message when using OPTIN option (1 ms) [ok]: Invalidation message sent when using OPTIN option with CLIENT CACHING yes (0 ms) [ok]: Invalidation message sent when using OPTOUT option (0 ms) [ok]: No invalidation message when using OPTOUT option with CLIENT CACHING no (0 ms) [ok]: Able to redirect to a RESP3 client (1 ms) [ok]: After switching from normal tracking to BCAST mode, no invalidation message is produced for pre-BCAST keys (1 ms) [ok]: BCAST with prefix collisions throw errors (1 ms) [ok]: hdel deliver invalidate message after response in the same connection (1 ms) [17/143 done]: unit/info-command (0 seconds) Testing unit/lazyfree [ok]: test unixsocket options are set correctly (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lru) (669 ms) [ok]: Tracking invalidation message is not interleaved with multiple keys response (112 ms) [ok]: Tracking invalidation message is not interleaved with transaction response (1 ms) [ok]: Tracking invalidation message of eviction keys should be before response (9 ms) [ok]: Millisecond/Seconds precision (1507 ms) [ok]: Ensure that key-level PERSIST on the key don't affect field TTL (1 ms) [ok]: Verify error when hash expire commands num fields is not provided (0 ms) [ok]: Unblocked BLMOVE gets notification after response (3 ms) [ok]: Tracking gets notification on tracking table key eviction (51 ms) [ok]: Invalidation message received for flushall (1 ms) [ok]: Invalidation message received for flushdb (1 ms) [ok]: Test ASYNC flushall (1 ms) [ok]: flushdb tracking invalidation message is not interleaved with transaction response (5 ms) [18/143 done]: unit/other (14 seconds) Testing unit/scan [ok]: WAITAOF replica copy everysec (946 ms) [ok]: Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort (200 ms) [ok]: Tracking info is correct (16 ms) [ok]: Hash ttl - check command stats (1 ms) [ok]: CLIENT GETREDIR provides correct client id (28 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking off (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking on with options (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optin (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking optout (0 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking bcast mode (1 ms) [ok]: CLIENT TRACKINGINFO provides reasonable results when tracking redir broken (1 ms) [ok]: Regression test for #11715 (16 ms) [ok]: RESP3 based basic invalidation with client reply off (49 ms) [ok]: UNLINK can reclaim memory in background (406 ms) [ok]: {standalone} SCAN basic (128 ms) [ok]: RESP2 based basic invalidation with client reply off (84 ms) [ok]: RESP3 based basic redirect invalidation with client reply off (2 ms) [ok]: RESP3 based basic tracking-redir-broken with client reply off (1 ms) [ok]: maxmemory - is the memory limit honoured? (policy allkeys-lfu) (524 ms) [ok]: {standalone} SCAN COUNT (84 ms) [ok]: {standalone} SCAN MATCH (101 ms) [ok]: FLUSHDB ASYNC can reclaim memory in background (320 ms) [ok]: CLIENT TRACKINGINFO when start (1 ms) [ok]: Coverage: Basic CLIENT CACHING (0 ms) [ok]: Coverage: Basic CLIENT REPLY (0 ms) [ok]: Coverage: Basic CLIENT TRACKINGINFO (0 ms) [ok]: Coverage: Basic CLIENT GETREDIR (0 ms) [ok]: {standalone} SCAN TYPE (198 ms) [ok]: lazy free a stream with all types of metadata (128 ms) [ok]: lazy free a stream with deleted cgroup (3 ms) [19/143 done]: unit/tracking (2 seconds) Testing unit/pubsub [ok]: {standalone} SCAN unknown type (77 ms) [20/143 done]: unit/lazyfree (1 seconds) Testing unit/auth [ok]: Pub/Sub PING on RESP2 (0 ms) [ok]: Pub/Sub PING on RESP3 (0 ms) [ok]: PUBLISH/SUBSCRIBE basics (0 ms) [ok]: PUBLISH/SUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments (0 ms) [ok]: SUBSCRIBE to one channel more than once (1 ms) [ok]: UNSUBSCRIBE from non-subscribed channels (0 ms) [ok]: PUBLISH/PSUBSCRIBE basics (2 ms) [ok]: PUBLISH/PSUBSCRIBE with two clients (1 ms) [ok]: PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments (1 ms) [ok]: {standalone} SCAN with expired keys (93 ms) [ok]: AUTH fails if there is no password configured server side (0 ms) [ok]: Arity check for auth command (0 ms) [ok]: PubSub messages with CLIENT REPLY OFF (100 ms) [ok]: PUNSUBSCRIBE from non-subscribed channels (1 ms) [ok]: NUMSUB returns numbers, not strings (#1561) (0 ms) [ok]: NUMPATs returns the number of unique patterns (0 ms) [ok]: Mix SUBSCRIBE and PSUBSCRIBE (1 ms) [ok]: PUNSUBSCRIBE and UNSUBSCRIBE should always reply (0 ms) [ok]: stats: instantaneous metrics (2013 ms) [ok]: {standalone} SCAN with expired keys with TYPE filter (104 ms) [ok]: {standalone} SSCAN with encoding intset (1 ms) [ok]: {standalone} SSCAN with encoding listpack (2 ms) [ok]: {standalone} SSCAN with encoding hashtable (4 ms) [ok]: {standalone} HSCAN with encoding listpack (2 ms) [ok]: Keyspace notifications: we receive keyspace notifications (58 ms) [ok]: Measures elapsed time os.clock() (1433 ms) [ok]: Prohibit dangerous lua methods in sandbox (12 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lru) (674 ms) [ok]: Keyspace notifications: we receive keyevent notifications (50 ms) [ok]: Keyspace notifications: we can receive both kind of events (1 ms) [ok]: Keyspace notifications: we are able to mask events (0 ms) [ok]: Keyspace notifications: general events test (1 ms) [ok]: Keyspace notifications: list events test (0 ms) [ok]: Keyspace notifications: set events test (1 ms) [ok]: WAITAOF replica copy everysec with AOFRW (1080 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (16 ms) [ok]: Keyspace notifications: zset events test (2 ms) [ok]: Keyspace notifications: hash events test (1 ms) [ok]: Globals protection reading an undeclared global variable (0 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (1 ms) [ok]: Keyspace notifications: stream events test (2 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: AUTH fails when a wrong password is given (0 ms) [ok]: Arbitrary command gives an error when AUTH is required (0 ms) [ok]: AUTH succeeds when the right password is given (0 ms) [ok]: Once AUTH succeeded we can actually send commands to the server (0 ms) [ok]: For unauthenticated clients multibulk and bulk length are limited (0 ms) [ok]: For unauthenticated clients output buffer is limited (1 ms) [ok]: For once authenticated clients output buffer is NOT limited (0 ms) [ok]: Unauthenticated multibulk limit works in pipeline after AUTH (1 ms) [ok]: stats: debug metrics (113 ms) [ok]: stats: client input and output buffer limit disconnections (52 ms) [ok]: clients: pubsub clients (10 ms) [ok]: clients: watching clients (6 ms) [ok]: {standalone} HSCAN with encoding hashtable (153 ms) [ok]: {standalone} ZSCAN with encoding listpack (10 ms) [ok]: AUTH fails when binary password is wrong (0 ms) [ok]: AUTH succeeds when binary password is correct (0 ms) [ok]: Keyspace notifications: expired events (triggered expire) (201 ms) [ok]: {standalone} ZSCAN with encoding skiplist (110 ms) [ok]: {standalone} SCAN guarantees check under write load (17 ms) [ok]: {standalone} SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: {standalone} SSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with PATTERN (0 ms) [ok]: {standalone} HSCAN with NOVALUES (1 ms) [ok]: {standalone} ZSCAN with PATTERN (0 ms) [ok]: {standalone} ZSCAN with NOSCORES (0 ms) [ok]: {standalone} ZSCAN scores: regression test for issue #2175 (66 ms) [ok]: Keyspace notifications: expired events (background expire) (138 ms) [ok]: Keyspace notification: expired event (Expiration time is already expired) (0 ms) [ok]: Keyspace notifications: evicted events (1 ms) [ok]: Keyspace notifications: test CONFIG GET/SET of event flags (0 ms) [ok]: Keyspace notifications: new key test (1 ms) [ok]: publish to self inside multi (1 ms) [ok]: publish to self inside script (0 ms) [ok]: unsubscribe inside multi, and publish to self (1 ms) [ok]: config during loading (2047 ms) [ok]: memory: database and pubsub overhead and rehashing dict count (8 ms) [ok]: Setup replica and check field expiry after full sync (913 ms) [ok]: HASH TTL - replicated TTL is absolute and consistent on replica (2 ms) [21/143 done]: unit/pubsub (1 seconds) Testing unit/bitfield [ok]: HASH TTL - field expired on master gets deleted on replica (26 ms) [22/143 done]: unit/info (3 seconds) Testing unit/expire [ok]: HASH TTL - replica retains TTL and field before expiration (1 ms) [ok]: HSETEX with expired time is propagated to the replica (1 ms) [ok]: HGETEX with expired time is propagated to the replica (1 ms) [ok]: HEXPIREAT with expired time is propagated to the replica (0 ms) [ok]: EXPIRE - set timeouts multiple times (0 ms) [ok]: EXPIRE - It should be still possible to read 'x' (0 ms) [ok]: BITFIELD signed SET and GET basics (5 ms) [ok]: BITFIELD unsigned SET and GET basics (0 ms) [ok]: BITFIELD signed SET and GET together (0 ms) [ok]: BITFIELD unsigned with SET, GET and INCRBY arguments (0 ms) [ok]: BITFIELD with only key as argument (0 ms) [ok]: BITFIELD # form (1 ms) [ok]: BITFIELD basic INCRBY form (0 ms) [ok]: BITFIELD chaining of multiple commands (0 ms) [ok]: BITFIELD unsigned overflow wrap (3 ms) [ok]: BITFIELD unsigned overflow sat (2 ms) [ok]: BITFIELD signed overflow wrap (1 ms) [ok]: BITFIELD signed overflow sat (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-lfu) (863 ms) [ok]: Client output buffer soft limit is enforced if time is overreached (4256 ms) [ok]: MIGRATE cached connections are released after some time (15005 ms) [ok]: EVAL does not leak in the Lua stack (1131 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (1 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: BITFIELD overflow detection fuzzing (597 ms) [ok]: Script return recursive object (147 ms) [ok]: Script check unpack with massive arguments (33 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: MIGRATE is able to migrate a key between two instances (227 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on valkey table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [ok]: GEOSEARCH fuzzy test - byradius (15493 ms) [ignore]: large memory flag not provided [ok]: BITFIELD overflow wrap fuzzing (253 ms) [ok]: BITFIELD regression for #3221 (1 ms) [ok]: BITFIELD regression for #3564 (1 ms) [ok]: BITFIELD_RO with only key as argument (0 ms) [ok]: BITFIELD_RO fails when write option is used (0 ms) [ok]: MIGRATE is able to copy a key between two instances (236 ms) [ok]: MEMORY commands during loading (1263 ms) [ok]: Replication Primary -> R1 (1034 ms) [ok]: MIGRATE will not overwrite existing keys, unless REPLACE is used (222 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (408 ms) [ok]: MIGRATE propagates TTL correctly (154 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (154 ms) [ok]: CONFIG REWRITE handles rename-command properly (369 ms) [ok]: WAITAOF replica copy everysec with slow AOFRW (2128 ms) [ok]: WAITAOF replica copy everysec->always with AOFRW (105 ms) [ok]: WAITAOF replica copy appendfsync always (2 ms) [ok]: Timedout script does not cause a false dead client (237 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-random) (1428 ms) [ok]: primaryauth test with binary password dualchannel = yes (1955 ms) [ok]: Cluster config file latency (99 ms) [ok]: Timedout script link is still usable after Lua returns (120 ms) [ok]: AUTH fails when binary password is wrong (1 ms) [ok]: AUTH succeeds when binary password is correct (1 ms) [23/143 done]: unit/latency-monitor (17 seconds) Testing unit/multi [ok]: MULTI / EXEC basics (0 ms) [ok]: DISCARD (1 ms) [ok]: Nested MULTI are not allowed (8 ms) [ok]: MULTI where commands alter argc/argv (1 ms) [ok]: WATCH inside MULTI is not allowed (0 ms) [ok]: EXEC fails if there are errors while queueing commands #1 (1 ms) [ok]: EXEC fails if there are errors while queueing commands #2 (3 ms) [ok]: If EXEC aborts, the client MULTI state is cleared (1 ms) [ok]: EXEC works on WATCHed key not modified (2 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 1 watched) (0 ms) [ok]: EXEC fail on WATCHed key modified (1 key of 5 watched) (1 ms) [ok]: EXEC fail on WATCHed key modified by SORT with STORE even if the result is empty (1 ms) [ok]: BITFIELD: setup slave (914 ms) [ok]: BITFIELD: write on master, read on slave (1 ms) [ok]: BITFIELD_RO with only key as argument on read-only replica (0 ms) [ok]: BITFIELD_RO fails when write option is used on read-only replica (0 ms) [ok]: EXPIRE - After 2.1 seconds the key should no longer be here (2100 ms) [ok]: EXPIRE - write on expire should work (1 ms) [ok]: EXPIREAT - Check for EXPIRE alike behavior (0 ms) [ok]: SETEX - Set + Expire combo operation. Check for TTL (0 ms) [ok]: SETEX - Check value (0 ms) [ok]: SETEX - Overwrite old key (0 ms) [ok]: maxmemory - is the memory limit honoured? (policy volatile-ttl) (492 ms) [ok]: EXEC fail on lazy expired WATCHed key (104 ms) [ok]: Chain Replication (Primary -> R1 -> R2) preserves TTL (1073 ms) [ok]: WATCH stale keys should not fail EXEC (4 ms) [ok]: Delete WATCHed stale keys should not fail EXEC (3 ms) [ok]: FLUSHDB while watching stale keys should not fail EXEC (4 ms) [ok]: After successful EXEC key is no longer watched (1 ms) [ok]: After failed EXEC key is no longer watched (1 ms) [ok]: It is possible to UNWATCH (4 ms) [ok]: UNWATCH when there is nothing watched works as expected (0 ms) [ok]: FLUSHALL is able to touch the watched keys (0 ms) [ok]: FLUSHALL does not touch non affected keys (0 ms) [ok]: FLUSHDB is able to touch the watched keys (0 ms) [ok]: FLUSHDB does not touch non affected keys (0 ms) [ok]: SWAPDB is able to touch the watched keys that exist (1 ms) [ok]: SWAPDB is able to touch the watched keys that do not exist (0 ms) [ok]: SWAPDB does not touch watched stale keys (6 ms) [ok]: SWAPDB does not touch non-existing key replaced with stale key (33 ms) [ok]: Timedout scripts and unblocked command (497 ms) [ok]: SWAPDB does not touch stale key replaced with another stale key (4 ms) [ok]: WATCH is able to remember the DB a key belongs to (2 ms) [ok]: WATCH will consider touched keys target of EXPIRE (1 ms) [24/143 done]: unit/bitfield (3 seconds) Testing unit/tls [ok]: CONFIG REWRITE handles alias config properly (971 ms) [25/143 done]: unit/introspection (18 seconds) Testing unit/violations [ok]: SORT adds integer field to list (1 ms) [ok]: WAITAOF replica copy if replica is blocked (824 ms) [26/144 done]: unit/tls (0 seconds) Testing unit/pause [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (205 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-random) (325 ms) [27/144 done]: unit/violations (0 seconds) Testing unit/pubsubshard [ok]: Before the replica connects we issue two EVAL commands (4 ms) [ok]: SPUBLISH/SSUBSCRIBE basics (6 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (0 ms) [ok]: SPUBLISH/SSUBSCRIBE after UNSUBSCRIBE without arguments (1 ms) [ok]: SSUBSCRIBE to one channel more than once (0 ms) [ok]: SUNSUBSCRIBE from non-subscribed channels (6 ms) [ok]: PUBSUB command basics (0 ms) [ok]: SPUBLISH/SSUBSCRIBE with two clients (2 ms) [ok]: SPUBLISH/SSUBSCRIBE with PUBLISH/SUBSCRIBE (0 ms) [ok]: PubSubShard with CLIENT REPLY OFF (118 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (allkeys-lru) (459 ms) [ok]: SETEX - Wait for the key to expire (1102 ms) [ok]: SETEX - Wrong time parameter (0 ms) [ok]: PERSIST can undo an EXPIRE (5 ms) [ok]: PERSIST returns 0 against non existing or non volatile keys (1 ms) [ok]: WATCH will consider touched expired keys (1027 ms) [ok]: DISCARD should clear the WATCH dirty flag on the client (5 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-lru) (366 ms) [ok]: DISCARD should UNWATCH all the keys (5 ms) [ok]: MULTI / EXEC is not propagated (single write command) (83 ms) [ok]: Replica Failover (1018 ms) [ok]: WAITAOF replica multiple clients unblock - reuse last result (1015 ms) [ok]: WAITAOF on promoted replica (5 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands) (102 ms) [ok]: Connect a replica to the master instance (917 ms) [ok]: Replication of script multiple pushes to list with BLPOP (5 ms) [ok]: Lua scripts using SELECT are replicated correctly (5 ms) [ok]: MULTI / EXEC is propagated correctly (multiple commands with SELECT) (113 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-random) (377 ms) [ok]: MULTI / EXEC is propagated correctly (empty transaction) (91 ms) [ok]: MULTI / EXEC is propagated correctly (read-only commands) (99 ms) [ok]: MULTI / EXEC is propagated correctly (write command, no effect) (104 ms) [ok]: client evicted due to client tracking prefixes (16614 ms) [ok]: client evicted due to output buf (6 ms) [ok]: setup replication for following tests (923 ms) [ok]: publish message to master and receive on replica (1 ms) [ok]: client no-evict on (30 ms) [ok]: client no-evict off (38 ms) [ok]: MULTI / EXEC with REPLICAOF (97 ms) [ok]: DISCARD should not fail during OOM (1 ms) [ok]: maxmemory - only allkeys-* should remove non-volatile keys (volatile-ttl) (366 ms) [ok]: primaryauth test with binary password dualchannel = no (2080 ms) [28/144 done]: unit/auth (6 seconds) Testing unit/limits [ok]: avoid client eviction when client is freed by output buffer limit (79 ms) [ok]: EXPIRE precision is now the millisecond (1103 ms) [ok]: MULTI and script timeout (404 ms) [ok]: PSETEX can set sub-second expires (102 ms) [ok]: PEXPIRE can set sub-second expires (104 ms) [ok]: Test check paused info in info clients (2103 ms) [ok]: Test read commands are not blocked by client pause (1 ms) [ok]: PEXPIREAT can set sub-second expires (202 ms) [ok]: EXPIRE / EXPIREAT / PEXPIRE / PEXPIREAT Expiration time is already expired (2 ms) [ok]: TTL returns time to live in seconds (1 ms) [ok]: PTTL returns time to live in milliseconds (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -1 if key has no expire (0 ms) [ok]: TTL / PTTL / EXPIRETIME / PEXPIRETIME return -2 if key does not exit (0 ms) [ok]: EXPIRETIME returns absolute expiration time in seconds (0 ms) [ok]: PEXPIRETIME returns absolute expiration time in milliseconds (0 ms) [ok]: EXEC and script timeout (403 ms) [ok]: decrease maxmemory-clients causes client eviction (538 ms) [ok]: Test old pause-all takes precedence over new pause-write (less restrictive) (250 ms) [29/144 done]: unit/pubsubshard (2 seconds) Testing unit/protocol [ok]: Test new pause time is smaller than old one, then old time preserved (103 ms) [ok]: Test write commands are paused by RO (3 ms) [ok]: Test special commands are paused by RO (1 ms) [ok]: Test read/admin multi-execs are not blocked by pause RO (3 ms) [ok]: Test write multi-execs are blocked by pause RO (1 ms) [ok]: Test scripts are blocked by pause RO (0 ms) [ok]: Test RO scripts are not blocked by pause RO (1 ms) [ok]: Test read-only scripts in multi-exec are not blocked by pause RO (2 ms) [ok]: Test write scripts in multi-exec are blocked by pause RO (1 ms) [ok]: Test may-replicate commands are rejected in RO scripts (0 ms) [ok]: Test multiple clients can be queued up and unblocked (1 ms) [ok]: Test clients with syntax errors will get responses immediately (1 ms) [ok]: Test eviction is skipped during client pause (2 ms) [ok]: Handle an empty query (44 ms) [ok]: Handle an empty query in pipeline (1 ms) [ok]: Test both active and passive expires are skipped during client pause (102 ms) [ok]: Test that client pause starts at the end of a transaction (1 ms) [ok]: Negative multibulk length (49 ms) [ok]: Negative multibulk length in pipeline (1 ms) [ok]: Out of range multibulk length (0 ms) [ok]: Wrong multibulk payload header (1 ms) [ok]: Negative multibulk payload length (0 ms) [ok]: Out of range multibulk payload length (0 ms) [ok]: Non-number multibulk payload length (1 ms) [ok]: Multi bulk request not followed by bulk arguments (0 ms) [ok]: Generic wrong number of args (0 ms) [ok]: Mixing quoted and unquoted strings (0 ms) [ok]: Unbalanced single quotes (0 ms) [ok]: Unbalanced double quotes (1 ms) [ok]: evict clients only until below limit (109 ms) [ok]: MULTI-EXEC body and script timeout (404 ms) [ok]: Client output buffer soft limit is not enforced too early and is enforced when no traffic (4948 ms) [ok]: Protocol desync regression test #1 (55 ms) [ok]: Protocol desync regression test #2 (1 ms) [ok]: Protocol desync regression test #3 (0 ms) [ok]: Protocol desync regression test #4 (1 ms) [ok]: raw protocol response (0 ms) [ok]: raw protocol response - deferred (0 ms) [ok]: raw protocol response - multiline (0 ms) [ok]: RESP3 attributes (0 ms) [ok]: RESP3 attributes readraw (0 ms) [ok]: RESP3 attributes on RESP2 (0 ms) [ok]: test big number parsing (0 ms) [ok]: test bool parsing (0 ms) [ok]: test verbatim str parsing (0 ms) [ok]: Check if maxclients works refusing connections (909 ms) [ok]: test large number of args (75 ms) [ok]: test argument rewriting - issue 9598 (1 ms) [ok]: Server should actively expire keys incrementally (606 ms) [ok]: No response for single command if client output buffer hard limit is enforced (108 ms) [30/144 done]: unit/limits (1 seconds) Testing unit/type/zset [ok]: WAITAOF master that loses a replica and backlog is dropped (2008 ms) [ok]: Check encoding - listpack (0 ms) [ok]: ZSET basic ZADD and score update - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - listpack (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - listpack (0 ms) [ok]: ZADD with options syntax error with incomplete pair - listpack (0 ms) [ok]: ZADD XX option without key - listpack (0 ms) [ok]: ZADD XX existing key - listpack (0 ms) [ok]: ZADD XX returns the number of elements actually added - listpack (0 ms) [ok]: ZADD XX updates existing elements score - listpack (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - listpack (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - listpack (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - listpack (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - listpack (0 ms) [ok]: ZADD XX and NX are not compatible - listpack (0 ms) [ok]: ZADD NX with non existing key - listpack (0 ms) [ok]: ZADD NX only add new elements without updating old ones - listpack (0 ms) [ok]: ZADD GT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and NX are not compatible - listpack (0 ms) [ok]: ZADD LT and GT are not compatible - listpack (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - listpack (1 ms) [ok]: ZADD INCR LT/GT with inf - listpack (0 ms) [ok]: ZADD INCR works like ZINCRBY - listpack (1 ms) [ok]: ZADD INCR works with a single score-element pair - listpack (0 ms) [ok]: ZADD CH option changes return value to all changed elements - listpack (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - listpack (0 ms) [ok]: ZINCRBY against invalid incr value - listpack (1 ms) [ok]: ZADD - Variadic version base case - listpack (0 ms) [ok]: ZADD - Return value is the number of actually added items - listpack (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - listpack (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - listpack (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - listpack (1 ms) [ok]: ZCARD basics - listpack (0 ms) [ok]: ZREM removes key after last element is removed - listpack (0 ms) [ok]: ZREM variadic version - listpack (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - listpack (1 ms) [ok]: ZRANGE basics - listpack (1 ms) [ok]: ZREVRANGE basics - listpack (1 ms) [ok]: ZRANK/ZREVRANK basics - listpack (0 ms) [ok]: ZRANK - after deletion - listpack (0 ms) [ok]: ZINCRBY - can create a new sorted set - listpack (1 ms) [ok]: ZINCRBY - increment and decrement - listpack (1 ms) [ok]: ZINCRBY return value - listpack (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - listpack (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - listpack (0 ms) [ok]: ZRANGEBYSCORE with LIMIT - listpack (3 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - listpack (1 ms) [ok]: ZRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - listpack (1 ms) [ok]: HELLO without protover (2 ms) [ok]: HELLO and availability-zone (0 ms) [ok]: ZLEXCOUNT advanced - listpack (3 ms) [ok]: ZRANGEBYLEX with LIMIT - listpack (3 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - listpack (0 ms) [ok]: ZREMRANGEBYSCORE basics - listpack (7 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - listpack (0 ms) [ok]: ZREMRANGEBYRANK basics - listpack (2 ms) [ok]: ZREMRANGEBYLEX basics - listpack (7 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - listpack (1 ms) [ok]: ZUNIONSTORE with empty set - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - listpack (1 ms) [ok]: ZUNIONSTORE basics - listpack (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - listpack (1 ms) [ok]: ZUNIONSTORE with weights - listpack (0 ms) [ok]: ZUNION with weights - listpack (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - listpack (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - listpack (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - listpack (0 ms) [ok]: ZINTERSTORE basics - listpack (0 ms) [ok]: ZINTER basics - listpack (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - listpack (0 ms) [ok]: ZINTER RESP3 - listpack (0 ms) [ok]: evict clients in right order (large to small) (126 ms) [ok]: ZINTERSTORE with weights - listpack (1 ms) [ok]: ZINTER with weights - listpack (0 ms) [ok]: ZINTERSTORE with a regular set and weights - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - listpack (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - listpack (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZUNIONSTORE with NaN weights - listpack (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - listpack (1 ms) [ok]: ZINTERSTORE with NaN weights - listpack (0 ms) [ok]: ZDIFFSTORE basics - listpack (0 ms) [ok]: ZDIFF basics - listpack (0 ms) [ok]: ZDIFFSTORE with a regular set - listpack (0 ms) [ok]: ZDIFF subtracting set from itself - listpack (0 ms) [ok]: ZDIFF algorithm 1 - listpack (1 ms) [ok]: ZDIFF algorithm 2 - listpack (0 ms) [ok]: {standalone} SCAN regression test for issue #4906 (5920 ms) [ok]: just EXEC and script timeout (403 ms) [ok]: exec with write commands and state change (1 ms) [ok]: {standalone} SCAN MATCH pattern implies cluster slot (13 ms) [ok]: exec with read commands and stale replica state change (82 ms) [ok]: EXEC with only read commands should not be rejected when OOM (2 ms) [ok]: EXEC with at least one use-memory command should fail (1 ms) [ok]: Blocking commands ignores the timeout (0 ms) [ok]: MULTI propagation of PUBLISH (17 ms) [ok]: Regression for a crash on zero-length multibulk (0 ms) [ok]: Regression for a crash with blocking ops and pipelining (1 ms) [ok]: Connect a replica to the master instance (909 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain commands from Lua (2 ms) [ok]: PRNG is seeded randomly for command replication (1 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: MULTI propagation of SCRIPT LOAD (100 ms) [31/144 done]: unit/protocol (1 seconds) Testing unit/type/set [ok]: client total memory grows during client no-evict (132 ms) [ok]: MULTI propagation of EVAL (100 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - listpack (5 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - hashtable (10 ms) [ok]: SADD, SCARD, SISMEMBER, SMISMEMBER, SMEMBERS basics - intset (1 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non set (0 ms) [ok]: SMISMEMBER SMEMBERS SCARD against non existing key (0 ms) [ok]: SMISMEMBER requires one or more members (1 ms) [ok]: SADD against non set (0 ms) [ok]: SADD a non-integer against a small intset (0 ms) [ok]: SADD a non-integer against a large intset (5 ms) [ok]: SADD an integer larger than 64 bits (4 ms) [ok]: SADD an integer larger than 64 bits to a large intset (12 ms) [ok]: client total memory grows during maxmemory-clients disabled (135 ms) [ok]: MULTI propagation of SCRIPT FLUSH (103 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single (41 ms) [32/144 done]: unit/client-eviction (21 seconds) Testing unit/type/hash [ok]: SADD overflows the maximum allowed elements in a listpack - single (19 ms) [ok]: SADD overflows the maximum allowed integers in an intset - multiple (46 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: MULTI propagation of XREADGROUP (100 ms) [ok]: MULTI with SAVE (1 ms) [ok]: MULTI with SHUTDOWN (0 ms) [ok]: SADD overflows the maximum allowed integers in an intset - single_multiple (49 ms) [ok]: SADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: Variadic SADD (1 ms) [ok]: HSET/HLEN - Small hash creation (2 ms) [ok]: Is the small hash encoded with a listpack? (0 ms) [ok]: HRANDFIELD - listpack (6 ms) [ok]: Promotion to primary (2754 ms) [ok]: HRANDFIELD - hashtable (10 ms) [ok]: HRANDFIELD with RESP3 (1 ms) [ok]: HRANDFIELD count of 0 is handled correctly (0 ms) [ok]: HRANDFIELD count overflow (0 ms) [ok]: HRANDFIELD with against non existing key (0 ms) [ok]: HRANDFIELD count of 0 is handled correctly - emptyarray (1 ms) [ok]: HRANDFIELD with against non existing key - emptyarray (0 ms) [ok]: Test when replica paused, offset would not grow (2 ms) [ok]: Test replica offset would grow after unpause (1 ms) [ok]: Test the randomkey command will not cause the server to get into an infinite loop during the client pause write (11 ms) [ok]: CLIENT UNBLOCK is not allow to unblock client blocked by CLIENT PAUSE (1 ms) [ok]: Set encoding after DEBUG RELOAD (150 ms) [ok]: SREM basics - $type (1 ms) [ok]: HRANDFIELD with - hashtable (121 ms) [ok]: SREM basics - $type (15 ms) [ok]: SREM basics - intset (1 ms) [ok]: SREM with multiple arguments (0 ms) [ok]: SREM variadic version with more args needed to destroy the key (0 ms) [ok]: SINTERCARD with illegal arguments (1 ms) [ok]: SINTERCARD against non-set should throw error (0 ms) [ok]: SINTERCARD against non-existing key (0 ms) [ok]: MULTI with BGREWRITEAOF (210 ms) [ok]: Generated sets must be encoded correctly - regular (0 ms) [ok]: SINTER with two sets - regular (0 ms) [ok]: SINTERCARD with two sets - regular (1 ms) [ok]: SINTERSTORE with two sets - regular (0 ms) [ok]: Server should lazy expire keys (1003 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - regular (4 ms) [ok]: SUNION with two sets - regular (5 ms) [ok]: SUNIONSTORE with two sets - regular (4 ms) [ok]: SINTER against three sets - regular (0 ms) [ok]: SINTERCARD against three sets - regular (0 ms) [ok]: SINTERSTORE with three sets - regular (0 ms) [ok]: SUNION with non existing keys - regular (4 ms) [ok]: SDIFF with two sets - regular (1 ms) [ok]: SDIFF with three sets - regular (0 ms) [ok]: SDIFFSTORE with three sets - regular (0 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - regular (3 ms) [ok]: Generated sets must be encoded correctly - intset (0 ms) [ok]: SINTER with two sets - intset (0 ms) [ok]: SINTERCARD with two sets - intset (0 ms) [ok]: SINTERSTORE with two sets - intset (1 ms) [ok]: No response for multi commands in pipeline if client output buffer limit is enforced (1042 ms) [ok]: SINTERSTORE with two sets, after a DEBUG RELOAD - intset (3 ms) [ok]: SUNION with two sets - intset (6 ms) [ok]: SUNIONSTORE with two sets - intset (5 ms) [ok]: SINTER against three sets - intset (0 ms) [ok]: SINTERCARD against three sets - intset (0 ms) [ok]: SINTERSTORE with three sets - intset (0 ms) [ok]: SUNION with non existing keys - intset (5 ms) [ok]: SDIFF with two sets - intset (0 ms) [ok]: SDIFF with three sets - intset (0 ms) [ok]: SDIFFSTORE with three sets - intset (1 ms) [ok]: SINTER/SUNION/SDIFF with three same sets - intset (3 ms) [ok]: SINTERSTORE with two listpack sets where result is intset (0 ms) [ok]: Execute transactions completely even if client output buffer limit is enforced (24 ms) [ok]: SINTERSTORE with two hashtable sets where result is intset (10 ms) [ok]: SUNION hashtable and listpack (0 ms) [ok]: SDIFF with first set empty (0 ms) [ok]: SDIFF with same set two times (1 ms) [ok]: Obuf limit, HRANDFIELD with huge count stopped mid-run (23 ms) [ok]: Obuf limit, KEYS stopped mid-run (44 ms) [ok]: HRANDFIELD with - listpack (180 ms) [33/144 done]: unit/obuf-limits (13 seconds) Testing unit/type/stream-cgroups [ok]: maxmemory - policy volatile-lru should only remove volatile keys. (2467 ms) [ok]: MULTI with config set appendonly (213 ms) [ok]: MULTI with config error (0 ms) [ok]: Flushall while watching several keys by one client (0 ms) [ok]: MULTI is rejected when CLIENT REPLY is ON/OFF/SKIP (1 ms) [ok]: HSET/HLEN - Big hash creation (94 ms) [ok]: Is the big hash encoded with an hash table? (0 ms) [ok]: HGET against the small hash (0 ms) [ok]: XGROUP CREATE: creation and duplicate group name detection (0 ms) [ok]: XGROUP CREATE: with ENTRIESREAD parameter (1 ms) [ok]: XGROUP CREATE: automatic stream creation fails without MKSTREAM (0 ms) [ok]: XGROUP CREATE: automatic stream creation works with MKSTREAM (0 ms) [ok]: XREADGROUP will return only new elements (0 ms) [ok]: XREADGROUP can read the history of the elements we own (1 ms) [ok]: XPENDING is able to return pending items (0 ms) [ok]: XPENDING can return single consumer items (0 ms) [ok]: XPENDING only group (0 ms) [ok]: CLIENT REPLY OFF/SKIP: multi command (93 ms) [ok]: AUTH errored inside MULTI will add the reply (0 ms) [ok]: XPENDING with IDLE (20 ms) [ok]: XPENDING with exclusive range intervals works as expected (1 ms) [ok]: XACK is able to remove items from the consumer/group PEL (1 ms) [ok]: XACK can't remove the same item multiple times (0 ms) [ok]: XACK is able to accept multiple arguments (0 ms) [ok]: XACK should fail if got at least one invalid ID (3 ms) [ok]: PEL NACK reassignment after XGROUP SETID event (1 ms) [ok]: XREADGROUP will not report data on empty history. Bug #5577 (2 ms) [ok]: XREADGROUP history reporting of deleted entries. Bug #5570 (2 ms) [ok]: HGET against the big hash (82 ms) [ok]: HGET against non existing key (0 ms) [ok]: HSET in update and insert mode (1 ms) [ok]: HSETNX target key missing - small hash (0 ms) [ok]: HSETNX target key exists - small hash (0 ms) [ok]: HSETNX target key missing - big hash (1 ms) [ok]: HSETNX target key exists - big hash (0 ms) [ok]: HSET/HMSET wrong number of args (0 ms) [ok]: HMSET - small hash (0 ms) [ok]: Blocking XREADGROUP will not reply with an empty array (24 ms) [ok]: Blocking XREADGROUP: key deleted (1 ms) [ok]: Blocking XREADGROUP: key type changed with SET (0 ms) [ok]: Blocking XREADGROUP: key type changed with transaction (1 ms) [ok]: Blocking XREADGROUP: flushed DB (1 ms) [ok]: Blocking XREADGROUP: swapped DB, key doesn't exist (0 ms) [ok]: Blocking XREADGROUP: swapped DB, key is not a stream (0 ms) [ok]: XREAD and XREADGROUP against wrong parameter (1 ms) [ok]: Blocking XREAD: key deleted (0 ms) [ok]: Blocking XREAD: key type changed with SET (1 ms) [ok]: Blocking XREADGROUP for stream that ran dry (issue #5299) (24 ms) [ok]: Blocking XREADGROUP will ignore BLOCK if ID is not > (2 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on list (2 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - avoid endless loop (1 ms) [ok]: HMSET - big hash (54 ms) [ok]: HMGET against non existing key and fields (0 ms) [ok]: Hash commands against wrong type (2 ms) [ok]: HMGET - small hash (0 ms) [ok]: HMGET - big hash (54 ms) [ok]: HKEYS - small hash (2 ms) [ok]: MULTI with FLUSHALL and AOF (5 ms) [ok]: HKEYS - big hash (7 ms) [ok]: HVALS - small hash (0 ms) [ok]: MIGRATE can correctly transfer large values (5474 ms) [ok]: HVALS - big hash (1 ms) [ok]: HGETALL - small hash (0 ms) [ok]: HGETALL - big hash (22 ms) [ok]: HGETALL against non-existing key (0 ms) [ok]: HDEL and return value (0 ms) [ok]: HDEL - more than a single value (1 ms) [ok]: HDEL - hash becomes empty before deleting all specified fields (0 ms) [ok]: HEXISTS (1 ms) [ok]: Is a ziplist encoded Hash promoted on big payload? (0 ms) [ok]: HINCRBY against non existing database key (1 ms) [ok]: HINCRBY HINCRBYFLOAT against non-integer increment value (0 ms) [ok]: HINCRBY against non existing hash key (0 ms) [ok]: HINCRBY against hash key created by hincrby itself (0 ms) [ok]: HINCRBY against hash key originally set with HSET (1 ms) [ok]: HINCRBY over 32bit value (0 ms) [ok]: HINCRBY over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBY fails against hash value with spaces (left) (0 ms) [ok]: HINCRBY fails against hash value with spaces (right) (1 ms) [ok]: HINCRBY can detect overflows (0 ms) [ok]: HINCRBYFLOAT against non existing database key (0 ms) [ok]: HINCRBYFLOAT against non existing hash key (0 ms) [ok]: HINCRBYFLOAT against hash key created by hincrby itself (1 ms) [ok]: HINCRBYFLOAT against hash key originally set with HSET (0 ms) [ok]: HINCRBYFLOAT over 32bit value (0 ms) [ok]: HINCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (left) (1 ms) [ok]: HINCRBYFLOAT fails against hash value with spaces (right) (0 ms) [ok]: HINCRBYFLOAT fails against hash value that contains a null-terminator in the middle (0 ms) [ok]: HSTRLEN against the small hash (0 ms) [ok]: HSTRLEN against the big hash (85 ms) [ok]: HSTRLEN against non existing field (0 ms) [ok]: HSTRLEN corner cases (2 ms) [ok]: HINCRBYFLOAT over hash-max-listpack-value encoded with a listpack (1 ms) [ok]: Hash ziplist regression test for large keys (1 ms) [ok]: Hash fuzzing #1 - 10 fields (25 ms) [ok]: Hash fuzzing #2 - 10 fields (15 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (1 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (1 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (1 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (1 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (1 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (1 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (1 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (1 ms) [ok]: Script block the time during execution (10 ms) [ok]: Script delete the expired key (3 ms) [ok]: MIGRATE can correctly transfer hashes (218 ms) [ok]: TIME command using cached time (11 ms) [ok]: Script block the time in some expiration related commands (83 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (1 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call server (1 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (1 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (1 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (4 ms) [ok]: EXPIRE should not resurrect keys (issue #1026) (1004 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (7 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (1 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (1 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (0 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: 5 keys in, 5 keys out (7 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EXPIRE with empty string as TTL should report an error (0 ms) [ok]: SET with EX with big integer should report an error (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (1 ms) [ok]: SET with EX with smallest integer should report an error (1 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: GETEX with big integer should report an error (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: GETEX with smallest integer should report an error (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EXPIRE with big integer overflows when converted to milliseconds (3 ms) [ok]: EVAL - JSON smoke test (0 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: PEXPIRE with big integer overflow when basetime is added (1 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: EXPIRE with big negative integer (2 ms) [ok]: PEXPIREAT with big integer works (0 ms) [ok]: PEXPIREAT with big negative integer works (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (121 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (0 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (1 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: WAITAOF master without backlog, wait is released when the replica finishes full-sync (2020 ms) [ok]: Blocking XREADGROUP for stream key that has clients blocked on stream - reprocessing command (1007 ms) [ok]: XGROUP DESTROY should unblock XREADGROUP with -NOGROUP (2 ms) [ok]: RENAME can unblock XREADGROUP with data (4 ms) [ok]: RENAME can unblock XREADGROUP with -NOGROUP (0 ms) [ok]: MIGRATE timeout actually works (753 ms) [ok]: {cluster} SCAN basic (76 ms) [ok]: {cluster} SCAN COUNT (52 ms) [ok]: ZDIFF fuzzing - listpack (2449 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (0 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - listpack (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - listpack (1 ms) [ok]: MIGRATE can migrate multiple keys at once (240 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack (0 ms) [ok]: MIGRATE with multiple keys must have empty key arg (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - listpack (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - listpack (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - listpack (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - listpack (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - listpack RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - listpack RESP3 (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - listpack RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - listpack RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - listpack RESP3 (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - listpack RESP3 (1 ms) [ok]: Check encoding - skiplist (0 ms) [ok]: ZSET basic ZADD and score update - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZADD - skiplist (0 ms) [ok]: ZSET element can't be set to NaN with ZINCRBY - skiplist (0 ms) [ok]: ZADD with options syntax error with incomplete pair - skiplist (0 ms) [ok]: ZADD XX option without key - skiplist (0 ms) [ok]: ZADD XX existing key - skiplist (0 ms) [ok]: ZADD XX returns the number of elements actually added - skiplist (0 ms) [ok]: ZADD XX updates existing elements score - skiplist (1 ms) [ok]: ZADD GT updates existing elements when new scores are greater - skiplist (0 ms) [ok]: ZADD LT updates existing elements when new scores are lower - skiplist (0 ms) [ok]: ZADD GT XX updates existing elements when new scores are greater and skips new elements - skiplist (1 ms) [ok]: ZADD LT XX updates existing elements when new scores are lower and skips new elements - skiplist (0 ms) [ok]: ZADD XX and NX are not compatible - skiplist (0 ms) [ok]: ZADD NX with non existing key - skiplist (0 ms) [ok]: ZADD NX only add new elements without updating old ones - skiplist (0 ms) [ok]: ZADD GT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and NX are not compatible - skiplist (0 ms) [ok]: ZADD LT and GT are not compatible - skiplist (0 ms) [ok]: ZADD INCR LT/GT replies with nill if score not updated - skiplist (1 ms) [ok]: ZADD INCR LT/GT with inf - skiplist (0 ms) [ok]: ZADD INCR works like ZINCRBY - skiplist (1 ms) [ok]: ZADD INCR works with a single score-element pair - skiplist (0 ms) [ok]: ZADD CH option changes return value to all changed elements - skiplist (0 ms) [ok]: ZINCRBY calls leading to NaN result in error - skiplist (0 ms) [ok]: ZINCRBY against invalid incr value - skiplist (0 ms) [ok]: ZADD - Variadic version base case - skiplist (0 ms) [ok]: ZADD - Return value is the number of actually added items - skiplist (0 ms) [ok]: ZADD - Variadic version does not add nothing on single parsing err - skiplist (0 ms) [ok]: ZADD - Variadic version will raise error on missing arg - skiplist (0 ms) [ok]: ZINCRBY does not work variadic even if shares ZADD implementation - skiplist (0 ms) [ok]: ZCARD basics - skiplist (0 ms) [ok]: ZREM removes key after last element is removed - skiplist (0 ms) [ok]: ZREM variadic version - skiplist (0 ms) [ok]: ZREM variadic version -- remove elements after key deletion - skiplist (0 ms) [ok]: ZRANGE basics - skiplist (0 ms) [ok]: ZREVRANGE basics - skiplist (1 ms) [ok]: ZRANK/ZREVRANK basics - skiplist (1 ms) [ok]: ZRANK - after deletion - skiplist (0 ms) [ok]: ZINCRBY - can create a new sorted set - skiplist (0 ms) [ok]: ZINCRBY - increment and decrement - skiplist (0 ms) [ok]: ZINCRBY return value - skiplist (0 ms) [ok]: ZRANGEBYSCORE/ZREVRANGEBYSCORE/ZCOUNT basics - skiplist (2 ms) [ok]: ZRANGEBYSCORE with WITHSCORES - skiplist (1 ms) [ok]: ZRANGEBYSCORE with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYSCORE with LIMIT and WITHSCORES - skiplist (0 ms) [ok]: ZRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZRANGEBYLEX/ZREVRANGEBYLEX/ZLEXCOUNT basics - skiplist (1 ms) [ok]: ZLEXCOUNT advanced - skiplist (1 ms) [ok]: ZRANGEBYLEX with LIMIT - skiplist (2 ms) [ok]: ZRANGEBYLEX with invalid lex range specifiers - skiplist (0 ms) [ok]: {cluster} SCAN MATCH (148 ms) [ok]: ZREMRANGEBYSCORE basics - skiplist (5 ms) [ok]: ZREMRANGEBYSCORE with non-value min or max - skiplist (0 ms) [ok]: ZREMRANGEBYRANK basics - skiplist (2 ms) [ok]: ZREMRANGEBYLEX basics - skiplist (6 ms) [ok]: ZUNIONSTORE against non-existing key doesn't set destination - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF against non-existing key - skiplist (0 ms) [ok]: ZUNIONSTORE with empty set - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with empty set - skiplist (1 ms) [ok]: ZUNIONSTORE basics - skiplist (0 ms) [ok]: ZUNION/ZINTER/ZINTERCARD/ZDIFF with integer members - skiplist (1 ms) [ok]: ZUNIONSTORE with weights - skiplist (0 ms) [ok]: ZUNION with weights - skiplist (0 ms) [ok]: ZUNIONSTORE with a regular set and weights - skiplist (1 ms) [ok]: ZUNIONSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MIN - skiplist (0 ms) [ok]: ZUNIONSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNION/ZINTER with AGGREGATE MAX - skiplist (0 ms) [ok]: ZINTERSTORE basics - skiplist (0 ms) [ok]: ZINTER basics - skiplist (0 ms) [ok]: ZINTERCARD with illegal arguments (0 ms) [ok]: ZINTERCARD basics - skiplist (0 ms) [ok]: ZINTER RESP3 - skiplist (0 ms) [ok]: ZINTERSTORE with weights - skiplist (0 ms) [ok]: ZINTER with weights - skiplist (0 ms) [ok]: ZINTERSTORE with a regular set and weights - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MIN - skiplist (0 ms) [ok]: ZINTERSTORE with AGGREGATE MAX - skiplist (0 ms) [ok]: ZUNIONSTORE with +inf/-inf scores - skiplist (0 ms) [ok]: ZUNIONSTORE with NaN weights - skiplist (0 ms) [ok]: ZINTERSTORE with +inf/-inf scores - skiplist (0 ms) [ok]: ZINTERSTORE with NaN weights - skiplist (1 ms) [ok]: ZDIFFSTORE basics - skiplist (0 ms) [ok]: ZDIFF basics - skiplist (0 ms) [ok]: ZDIFFSTORE with a regular set - skiplist (0 ms) [ok]: ZDIFF subtracting set from itself - skiplist (0 ms) [ok]: ZDIFF algorithm 1 - skiplist (0 ms) [ok]: ZDIFF algorithm 2 - skiplist (0 ms) [ok]: {cluster} SCAN TYPE (76 ms) [ok]: MIGRATE with multiple keys migrate just existing ones (143 ms) [ok]: {cluster} SCAN unknown type (43 ms) [ok]: SDIFF fuzzing (1786 ms) [ok]: SDIFF against non-set should throw error (0 ms) [ok]: SDIFF should handle non existing key as empty (0 ms) [ok]: SDIFFSTORE against non-set should throw error (1 ms) [ok]: SDIFFSTORE should handle non existing key as empty (1 ms) [ok]: SINTER against non-set should throw error (0 ms) [ok]: SINTER should handle non existing key as empty (0 ms) [ok]: SINTER with same integer elements but different encoding (1 ms) [ok]: SINTERSTORE against non-set should throw error (0 ms) [ok]: SINTERSTORE against non existing keys should delete dstkey (1 ms) [ok]: SUNION against non-set should throw error (0 ms) [ok]: SUNION should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non-set should throw error (0 ms) [ok]: SUNIONSTORE should handle non existing key as empty (1 ms) [ok]: SUNIONSTORE against non existing keys should delete dstkey (0 ms) [ok]: SPOP basics - listpack (1 ms) [ok]: SPOP with =1 - listpack (0 ms) [ok]: SRANDMEMBER - listpack (4 ms) [ok]: SPOP basics - intset (0 ms) [ok]: SPOP with =1 - intset (0 ms) [ok]: SRANDMEMBER - intset (4 ms) [ok]: SPOP integer from listpack set (0 ms) [ok]: SPOP with - listpack (2 ms) [ok]: SPOP with - intset (1 ms) [ok]: {cluster} SCAN with expired keys (69 ms) [ok]: SPOP with - hashtable (1 ms) [ok]: SPOP using integers, testing Knuth's and Floyd's algorithm (2 ms) [ok]: SPOP using integers with Knuth's algorithm (0 ms) [ok]: SPOP new implementation: code path #1 intset (1 ms) [ok]: SPOP new implementation: code path #2 intset (1 ms) [ok]: SPOP new implementation: code path #3 intset (1 ms) [ok]: SPOP new implementation: code path #1 listpack (1 ms) [ok]: SPOP new implementation: code path #2 listpack (1 ms) [ok]: SPOP new implementation: code path #3 listpack (1 ms) [ok]: {cluster} SCAN with expired keys with TYPE filter (51 ms) [ok]: {cluster} SSCAN with encoding intset (1 ms) [ok]: {cluster} SSCAN with encoding listpack (1 ms) [ok]: {cluster} SSCAN with encoding hashtable (2 ms) [ok]: {cluster} HSCAN with encoding listpack (1 ms) [ok]: XCLAIM can claim PEL items from another consumer (605 ms) [ok]: {cluster} HSCAN with encoding hashtable (72 ms) [ok]: {cluster} ZSCAN with encoding listpack (1 ms) [ok]: SPOP new implementation: code path #1 propagate as DEL or UNLINK (133 ms) [ok]: SRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: SRANDMEMBER with against non existing key (0 ms) [ok]: SRANDMEMBER count overflow (0 ms) [ok]: SRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: SRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: SRANDMEMBER with - listpack (12 ms) [ok]: SRANDMEMBER with - intset (10 ms) [ok]: MIGRATE with multiple keys: stress command rewriting (256 ms) [ok]: SRANDMEMBER with - hashtable (9 ms) [ok]: {cluster} ZSCAN with encoding skiplist (68 ms) [ok]: {cluster} SCAN guarantees check under write load (12 ms) [ok]: {cluster} SSCAN with integer encoded object (issue #1345) (0 ms) [ok]: {cluster} SSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with PATTERN (0 ms) [ok]: {cluster} HSCAN with NOVALUES (1 ms) [ok]: {cluster} ZSCAN with PATTERN (0 ms) [ok]: {cluster} ZSCAN with NOSCORES (0 ms) [ok]: SRANDMEMBER histogram distribution - listpack (38 ms) [ok]: {cluster} ZSCAN scores: regression test for issue #2175 (46 ms) [ok]: SRANDMEMBER histogram distribution - intset (39 ms) [ok]: WAITAOF master isn't configured to do AOF (1006 ms) [ok]: Measures elapsed time os.clock() (1037 ms) [ok]: Prohibit dangerous lua methods in sandbox (1 ms) [ok]: SRANDMEMBER histogram distribution - hashtable (45 ms) [ok]: SMOVE basics - from regular set to intset (1 ms) [ok]: SMOVE basics - from intset to regular set (1 ms) [ok]: SMOVE non existing key (1 ms) [ok]: SMOVE non existing src set (0 ms) [ok]: SMOVE from regular set to non existing destination set (1 ms) [ok]: SMOVE from intset to non existing destination set (0 ms) [ok]: SMOVE wrong src key type (0 ms) [ok]: SMOVE wrong dst key type (0 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (14 ms) [ok]: SMOVE with identical source and destination (0 ms) [ok]: SMOVE only notify dstset when the addition is successful (1 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: MIGRATE with multiple keys: delete just ack keys (141 ms) [ok]: lua bit.tohex bug (25 ms) [ok]: Test an example script DECR_IF_GT (10 ms) [ok]: WAITAOF replica isn't configured to do AOF (104 ms) [ok]: MIGRATE AUTH: correct and wrong password cases (137 ms) [ok]: XCLAIM without JUSTID increments delivery count (402 ms) [34/144 done]: unit/dump (24 seconds) Testing unit/type/string [ok]: SET and GET an item (1 ms) [ok]: SET and GET an empty item (0 ms) [ok]: maxmemory - policy volatile-lfu should only remove volatile keys. (2314 ms) [ok]: Very big payload in GET/SET (66 ms) [ok]: Regression test for multi-exec with RANDOMKEY accessing the wrong per-slot dictionary (1 ms) [ok]: XCLAIM same consumer (202 ms) [ok]: EVAL does not leak in the Lua stack (379 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (1 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (0 ms) [ok]: Correct handling of reused argv (issue #1939) (1 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (1 ms) [ok]: Script return recursive object (101 ms) [ok]: Script check unpack with massive arguments (33 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (1 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (1 ms) [ok]: Try trick global protection 3 (0 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on valkey table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (1 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (1 ms) [ignore]: large memory flag not provided [ok]: Hash fuzzing #1 - 512 fields (2427 ms) [ok]: WAITAOF both local and replica got AOF enabled at runtime (917 ms) [ok]: XAUTOCLAIM can claim PEL items from another consumer (605 ms) [ok]: All time-to-live(TTL) in commands are propagated as absolute timestamp in milliseconds in AOF (2053 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (404 ms) [ok]: intsets implementation stress testing (1069 ms) [ok]: Hash with TTL fields migrates correctly between nodes (36 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (114 ms) [35/145 done]: unit/type/set (4 seconds) Testing unit/type/stream [ok]: XAUTOCLAIM as an iterator (203 ms) [ok]: XADD wrong number of args (0 ms) [ok]: XADD can add entries into a stream that XRANGE can fetch (0 ms) [ok]: XADD IDs are incremental (1 ms) [ok]: XADD IDs are incremental when ms is the same as well (0 ms) [ok]: XADD IDs correctly report an error when overflowing (0 ms) [ok]: XADD auto-generated sequence is incremented for last ID (0 ms) [ok]: XADD auto-generated sequence is zero for future timestamp ID (0 ms) [ok]: XADD auto-generated sequence can't be smaller than last ID (1 ms) [ok]: XADD auto-generated sequence can't overflow (0 ms) [ok]: XADD 0-* should succeed (0 ms) [ok]: XADD with MAXLEN option (45 ms) [ok]: XAUTOCLAIM COUNT must be > 0 (8 ms) [ok]: XCLAIM with XDEL (2 ms) [ok]: All TTL in commands are propagated as absolute timestamp in replication stream (130 ms) [ok]: XCLAIM with trimming (25 ms) [ok]: XAUTOCLAIM with XDEL (1 ms) [ok]: XAUTOCLAIM with XDEL and count (1 ms) [ok]: XAUTOCLAIM with out of range count (0 ms) [ok]: XCLAIM with trimming (4 ms) [ok]: First server should have role slave after REPLICAOF (0 ms) [ok]: Timedout script does not cause a false dead client (115 ms) [ok]: XINFO FULL output (6 ms) [ok]: XADD with MAXLEN option and the '=' argument (45 ms) [ok]: XADD with MAXLEN option and the '~' argument (38 ms) [ok]: XADD with NOMKSTREAM option (1 ms) [ok]: Timedout script link is still usable after Lua returns (63 ms) [ok]: XADD with MINID option (44 ms) [ok]: XTRIM with MINID option (0 ms) [ok]: XTRIM with MINID option, big delta from master record (1 ms) [ok]: Hash fuzzing #2 - 512 fields (585 ms) [ok]: Consumer seen-time and active-time (206 ms) [ok]: XGROUP CREATECONSUMER: create consumer if does not exist (4 ms) [ok]: XGROUP CREATECONSUMER: group must exist (2 ms) [ok]: ZDIFF fuzzing - skiplist (2022 ms) [ok]: ZPOPMIN with the count 0 returns an empty array (0 ms) [ok]: ZPOPMIN with negative count (1 ms) [ok]: ZPOPMAX with the count 0 returns an empty array (0 ms) [ok]: ZPOPMAX with negative count (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX with a single key - skiplist (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX with a single key - skiplist (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist (0 ms) [ok]: BZPOPMIN/BZPOPMAX with a single existing sorted set - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZPOPMIN/BZPOPMAX second sorted set has members - skiplist (0 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with a single existing sorted set - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX with multiple existing sorted sets - skiplist (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX second sorted set has members - skiplist (0 ms) [ok]: Basic ZPOPMIN/ZPOPMAX - skiplist RESP3 (1 ms) [ok]: ZPOPMIN/ZPOPMAX with count - skiplist RESP3 (0 ms) [ok]: Basic ZMPOP_MIN/ZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZMPOP_MIN/ZMPOP_MAX with count - skiplist RESP3 (0 ms) [ok]: BZPOPMIN/BZPOPMAX - skiplist RESP3 (1 ms) [ok]: BZMPOP_MIN/BZMPOP_MAX - skiplist RESP3 (1 ms) [ok]: ZPOP/ZMPOP against wrong type (1 ms) [ok]: ZMPOP with illegal argument (1 ms) [ok]: ZMPOP propagate as pop with count command to replica (21 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP3 (0 ms) [ok]: XREADGROUP with NOACK creates consumer (7 ms) [ok]: Timedout scripts and unblocked command (334 ms) [ok]: Consumer without PEL is present in AOF after AOFRW (115 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP3 (215 ms) [ok]: ZMPOP readraw in RESP3 (1 ms) [ok]: Consumer group read counter and lag in empty streams (2 ms) [ok]: Consumer group read counter and lag sanity (11 ms) [ok]: Consumer group lag with XDELs (10 ms) [ok]: Consumer group lag with XTRIM (12 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (202 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (2 ms) [ok]: Consumer group lag with XADD trimming (14 ms) [ok]: Loading from legacy (Redis <= v6.2.x, rdb_ver < 10) persistence (1 ms) [ok]: Loading from legacy (Redis <= v7.0.x, rdb_ver < 11) persistence (1 ms) [ok]: AOF rewrite during write load: RDB preamble=no (12605 ms) [ok]: BZMPOP readraw in RESP3 (202 ms) [ok]: ZPOPMIN/ZPOPMAX readraw in RESP2 (1 ms) [ok]: Before the replica connects we issue two EVAL commands (2 ms) [ok]: TTL Persistence in AOF aof-use-rdb-preamble yes (649 ms) [ok]: WAITAOF master sends PING after last write (1204 ms) [ok]: Stress test the hash ziplist -> hashtable encoding conversion (765 ms) [ok]: BZPOPMIN/BZPOPMAX readraw in RESP2 (203 ms) [ok]: ZMPOP readraw in RESP2 (0 ms) [ok]: For all replicated TTL-related commands, absolute expire times are identical on primary and replica (992 ms) [ok]: Turning off AOF kills the background writing child if any (110 ms) [ok]: Hash ziplist of various encodings (101 ms) [ok]: Hash ziplist of various encodings - sanitize dump (2 ms) [ok]: HINCRBYFLOAT does not allow NaN or Infinity (0 ms) [36/145 done]: unit/type/hash (5 seconds) Testing unit/type/incr [ok]: AOF rewrite of list with listpack encoding, string data (107 ms) [ok]: BZMPOP readraw in RESP2 (200 ms) [ok]: ZINTERSTORE regression with two sets, intset+hashtable (0 ms) [ok]: ZUNIONSTORE regression, should not create NaN in scores (0 ms) [ok]: ZINTERSTORE #516 regression, mixed sets and ziplist zsets (0 ms) [ok]: INCR against non existing key (0 ms) [ok]: INCR against key created by incr itself (0 ms) [ok]: DECR against key created by incr (0 ms) [ok]: DECR against key is not exist and incr (1 ms) [ok]: INCR against key originally set with SET (0 ms) [ok]: INCR over 32bit value (0 ms) [ok]: INCRBY over 32bit value with over 32bit increment (0 ms) [ok]: INCR fails against key with spaces (left) (0 ms) [ok]: INCR fails against key with spaces (right) (0 ms) [ok]: INCR fails against key with spaces (both) (1 ms) [ok]: DECRBY negation overflow (0 ms) [ok]: INCR fails against a key holding a list (0 ms) [ok]: DECRBY over 32bit value with over 32bit increment, negative res (0 ms) [ok]: DECRBY against key is not exist (0 ms) [ok]: INCR can modify objects in-place (1 ms) [ok]: INCRBYFLOAT against non existing key (1 ms) [ok]: INCRBYFLOAT against key originally set with SET (0 ms) [ok]: INCRBYFLOAT over 32bit value (0 ms) [ok]: INCRBYFLOAT over 32bit value with over 32bit increment (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (left) (1 ms) [ok]: INCRBYFLOAT fails against key with spaces (right) (0 ms) [ok]: INCRBYFLOAT fails against key with spaces (both) (0 ms) [ok]: INCRBYFLOAT fails against a key holding a list (0 ms) [ok]: INCRBYFLOAT does not allow NaN or Infinity (0 ms) [ok]: INCRBYFLOAT decrement (1 ms) [ok]: string to double with null terminator (0 ms) [ok]: No negative zero (0 ms) [ok]: INCRBY INCRBYFLOAT DECRBY against unhappy path (1 ms) [ok]: incr operation should update encoding from raw to int (0 ms) [ok]: decr operation should update encoding from raw to int (1 ms) [ok]: incrby operation should update encoding from raw to int (0 ms) [ok]: decrby operation should update encoding from raw to int (1 ms) [ok]: ZUNIONSTORE result is sorted (141 ms) [ok]: ZUNIONSTORE/ZINTERSTORE/ZDIFFSTORE error if using WITHSCORES (2 ms) [ok]: ZMSCORE retrieve (1 ms) [ok]: ZMSCORE retrieve from empty set (3 ms) [ok]: ZMSCORE retrieve with missing member (1 ms) [ok]: ZMSCORE retrieve single member (4 ms) [ok]: expired key which is created in writeable replicas should be deleted by active expiry (308 ms) [ok]: ZMSCORE retrieve requires one or more members (0 ms) [ok]: ZSET commands don't accept the empty strings as valid score (0 ms) [ok]: zunionInterDiffGenericCommand at least 1 input key (5 ms) [37/145 done]: unit/type/incr (0 seconds) Testing unit/type/list-3 [ok]: ZSCORE - listpack (47 ms) [ok]: AOF rewrite of list with quicklist encoding, string data (232 ms) [ok]: ZMSCORE - listpack (24 ms) [ok]: SET command will remove expire (0 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed (0 ms) [ok]: XADD mass insertion and XLEN (1321 ms) [ok]: XADD with ID 0-0 (2 ms) [ok]: ZSCORE after a DEBUG RELOAD - listpack (37 ms) [ok]: XADD with LIMIT delete entries no more than limit (0 ms) [ok]: XRANGE COUNT works as expected (1 ms) [ok]: XREVRANGE COUNT works as expected (0 ms) [ok]: AOF rewrite of list with listpack encoding, int data (64 ms) [ok]: Regression test for #2995: MULTI/EXEC with different slot keys should not duplicate on AOF reload (118 ms) [ok]: ZSET sorting stresser - listpack (42 ms) [ok]: Explicit regression for a list bug (1 ms) [ok]: Very big payload random access (2427 ms) [38/145 done]: unit/multi (10 seconds) Testing unit/type/list-2 [ok]: TTL Persistence in AOF aof-use-rdb-preamble no (552 ms) [ok]: AOF rewrite of list with quicklist encoding, int data (156 ms) [ok]: Regression for quicklist #3343 bug (142 ms) [ok]: Consumer group last ID propagation to slave (NOACK=0) (916 ms) [ok]: XRANGE can be used to iterate the whole stream (268 ms) [ok]: Connect a replica to the master instance (938 ms) [ok]: Replication of script multiple pushes to list with BLPOP (10 ms) [ok]: Lua scripts using SELECT are replicated correctly (2 ms) [ok]: AOF rewrite of set with intset encoding, string data (120 ms) [ok]: Check compression with recompress (101 ms) [ok]: AOF rewrite of set with hashtable encoding, string data (157 ms) [ok]: AOF rewrite of set with intset encoding, int data (103 ms) [ok]: Crash due to wrongly recompress after lrem (280 ms) [ok]: GEOSEARCH fuzzy test - bybox (11040 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element before it (50 ms) [ok]: AOF rewrite of set with hashtable encoding, int data (107 ms) [ok]: GEOSEARCH box edges fuzzy test (74 ms) [ok]: LINSERT correctly recompress full quicklistNode after inserting a element after it (51 ms) [39/145 done]: unit/geo (27 seconds) Testing unit/type/list [ok]: WAITAOF master client didn't send any write command (1203 ms) [ok]: SET 10000 numeric keys and access all them in reverse order (634 ms) [ok]: DBSIZE should be 10000 now (0 ms) [ok]: AOF rewrite of hash with listpack encoding, string data (103 ms) [ok]: packed node check compression with insert and pop (2 ms) [ok]: packed node check compression combined with trim (3 ms) [ok]: packed node check compression with lset (1 ms) [ok]: AOF rewrite of hash with hashtable encoding, string data (112 ms) [ok]: memoryusage of string (148 ms) [ok]: SETNX target key missing (1 ms) [ok]: SETNX target key exists (0 ms) [ok]: SETNX against not-expired volatile key (0 ms) [ok]: AOF rewrite of hash with listpack encoding, int data (102 ms) [ok]: AOF rewrite of hash with hashtable encoding, int data (155 ms) [ok]: AOF rewrite of zset with listpack encoding, string data (60 ms) [ok]: plain node check compression with insert and pop (397 ms) [ok]: Consumer group last ID propagation to slave (NOACK=1) (1035 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 128 element sorted set - listpack (1247 ms) [ok]: AOF rewrite of zset with skiplist encoding, string data (136 ms) [ok]: plain node check compression combined with trim (149 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (132 ms) [ok]: AOF rewrite of zset with listpack encoding, int data (103 ms) [ok]: HGETEX EX active expiry with single field (1114 ms) [ok]: XREVRANGE returns the reverse of XRANGE (1268 ms) [ok]: XRANGE exclusive ranges (2 ms) [ok]: XREAD with non empty stream (0 ms) [ok]: Non blocking XREAD with empty streams (0 ms) [ok]: AOF rewrite of zset with skiplist encoding, int data (112 ms) [ok]: plain node check compression with lset (209 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 128 element sorted set - listpack (214 ms) [ok]: AOF rewrite functions (105 ms) [ok]: ZSETs skiplist implementation backlink consistency test - listpack (21 ms) [ok]: Test LPUSH and LPOP on plain nodes (17 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (3 ms) [ok]: Test LREM on plain nodes (0 ms) [ok]: Test LPOS on plain nodes (0 ms) [ok]: Test LMOVE on plain nodes (2 ms) [ok]: BGREWRITEAOF is delayed if BGSAVE is in progress (208 ms) [ok]: BGREWRITEAOF is refused if already in progress (11 ms) [ok]: WAITAOF master client didn't send any command (1202 ms) [40/145 done]: unit/aofrw (27 seconds) Testing unit/cluster/announce-client-ports [ok]: Test LSET with packed / plain combinations (176 ms) [ok]: Test LSET with packed is split in the middle (3 ms) [ok]: SET - use KEEPTTL option, TTL should not be removed after loadaof (2006 ms) [ok]: GETEX use of PERSIST option should remove TTL (1 ms) [ok]: GETEX use of PERSIST option should remove TTL after loadaof (1 ms) [ok]: GETEX propagate as to replica as PERSIST, UNLINK, or nothing (90 ms) [ok]: EXPIRE with NX option on a key with ttl (14 ms) [ok]: EXPIRE with NX option on a key without ttl (2 ms) [ok]: EXPIRE with XX option on a key with ttl (1 ms) [ok]: EXPIRE with XX option on a key without ttl (0 ms) [ok]: EXPIRE with GT option on a key with lower ttl (0 ms) [ok]: EXPIRE with GT option on a key with higher ttl (1 ms) [ok]: EXPIRE with GT option on a key without ttl (1 ms) [ok]: EXPIRE with LT option on a key with higher ttl (0 ms) [ok]: EXPIRE with LT option on a key with lower ttl (0 ms) [ok]: EXPIRE with LT option on a key without ttl (1 ms) [ok]: EXPIRE with LT and XX option on a key with ttl (0 ms) [ok]: EXPIRE with LT and XX option on a key without ttl (0 ms) [ok]: EXPIRE with conflicting options: LT GT (0 ms) [ok]: EXPIRE with conflicting options: NX GT (1 ms) [ok]: EXPIRE with conflicting options: NX LT (3 ms) [ok]: EXPIRE with conflicting options: NX XX (0 ms) [ok]: EXPIRE with unsupported options (1 ms) [ok]: EXPIRE with unsupported options (0 ms) [ok]: EXPIRE with negative expiry (0 ms) [ok]: EXPIRE with negative expiry on a non-valitale key (0 ms) [ok]: EXPIRE with non-existed key (1 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - listpack (487 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (2 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: Test LSET with packed consist only one item (209 ms) [ok]: Crash due to delete entry from a compress quicklist node (2 ms) [ok]: Crash due to split quicklist node wrongly (0 ms) [ok]: Server should not propagate the read command on lazy expire (69 ms) [ok]: Test LPUSH and LPOP on plain nodes (6 ms) [ok]: Test LINDEX and LINSERT on plain nodes (1 ms) [ok]: Test LTRIM on plain nodes (1 ms) [ok]: Test LREM on plain nodes (1 ms) [ok]: Test LPOS on plain nodes (1 ms) [ok]: Test LMOVE on plain nodes (1 ms) [ok]: SCAN: Lazy-expire should not be wrapped in MULTI/EXEC (100 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=0) (917 ms) [ok]: Connect a replica to the master instance (813 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (1 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Replication tests of XCLAIM with deleted entries (autoclaim=1) (6 ms) [ok]: Test selective replication of certain commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [ok]: XREADGROUP ACK would propagate entries-read (3 ms) [ok]: RANDOMKEY: Lazy-expire should not be wrapped in MULTI/EXEC (101 ms) [ok]: import-source can be closed when import-mode is off (2 ms) [ok]: XREAD with non empty second stream (846 ms) [ok]: Blocking XREAD waiting new data (1 ms) [ok]: Blocking XREAD waiting old data (1 ms) [ok]: Test LSET with packed / plain combinations (222 ms) [ok]: Test LSET with packed is split in the middle (0 ms) [ok]: Blocking XREAD will not reply with an empty array (46 ms) [ok]: Import mode should forbid active expiration (111 ms) [ok]: Import mode should forbid lazy expiration (11 ms) [ok]: Blocking XREAD for stream that ran dry (issue #5299) (102 ms) [ok]: XREAD last element from non-empty stream (0 ms) [ok]: XREAD last element from empty stream (0 ms) [ok]: XREAD last element blocking from empty stream (1 ms) [ok]: XREAD last element blocking from non-empty stream (0 ms) [ok]: XREAD last element from multiple streams (1 ms) [ok]: XREAD last element with count > 1 (0 ms) [ok]: XREAD: XADD + DEL should not awake client (1 ms) [ok]: XREAD: XADD + DEL + LPUSH should not awake client (1 ms) [ok]: XREAD with same stream name multiple times should work (0 ms) [ok]: XREAD + multiple XADD inside transaction (1 ms) [ok]: XDEL basic test (0 ms) [ok]: XDEL multiply id test (1 ms) [ok]: HGETEX EX active expiry with multiple fields (1109 ms) [ok]: Test LSET with packed consist only one item (199 ms) [ok]: Crash due to delete entry from a compress quicklist node (0 ms) [ok]: Crash due to split quicklist node wrongly (1 ms) [ok]: Client can visit expired key in import-source state (112 ms) [ok]: maxmemory - policy volatile-random should only remove volatile keys. (5021 ms) [ok]: Empty stream with no lastid can be rewrite into AOF correctly (105 ms) [ok]: Negative ttl will not cause server to crash when import mode is on (102 ms) [ok]: LPOS basic usage - quicklist (45 ms) [41/146 done]: unit/type/stream-cgroups (7 seconds) Testing unit/cluster/cluster-migrateslots [ok]: LPOS RANK (positive, negative and zero rank) option (2 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (1 ms) [ok]: LPOS MAXLEN (0 ms) [ok]: LPOS when RANK is greater than matches (1 ms) [ok]: {cluster} SCAN regression test for issue #4906 (5565 ms) [ok]: {cluster} SCAN MATCH pattern implies cluster slot (11 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - quicklist (96 ms) [ok]: LPOP/RPOP with wrong number of arguments (0 ms) [42/146 done]: unit/scan (15 seconds) Testing unit/cluster/faildet [ok]: RPOP/LPOP with the optional count argument - quicklist (51 ms) [ok]: LPOS basic usage - listpack (1 ms) [ok]: LPOS RANK (positive, negative and zero rank) option (0 ms) [ok]: LPOS COUNT option (1 ms) [ok]: LPOS COUNT + RANK option (0 ms) [ok]: LPOS non existing key (0 ms) [ok]: LPOS no match (0 ms) [ok]: LPOS MAXLEN (1 ms) [ok]: LPOS when RANK is greater than matches (0 ms) [ok]: LPUSH, RPUSH, LLENGTH, LINDEX, LPOP - listpack (1 ms) [ok]: LPOP/RPOP with wrong number of arguments (1 ms) [ok]: RPOP/LPOP with the optional count argument - listpack (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP3 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP3 (0 ms) [ok]: LPOP/RPOP with the count 0 returns an empty array in RESP2 (0 ms) [ok]: LPOP/RPOP against non existing key in RESP2 (0 ms) [ok]: LPOP/RPOP with against non existing key in RESP2 (0 ms) [ok]: Variadic RPUSH/LPUSH (0 ms) [ok]: DEL a list (0 ms) [ok]: BLPOP: single existing list - quicklist (50 ms) [ok]: Active expiration triggers hashtable shrink (159 ms) [ok]: BLPOP: multiple existing lists - quicklist (100 ms) Time: 1004 [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1004 ms) [ok]: BZPOPMIN with same key multiple times should work (9 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (1 ms) [ok]: BLPOP: second list has an entry - quicklist (50 ms) [ok]: SETNX against expired volatile key (2344 ms) [ok]: GETEX EX option (0 ms) [ok]: GETEX PX option (1 ms) [ok]: GETEX EXAT option (0 ms) [ok]: GETEX PXAT option (0 ms) [ok]: GETEX PERSIST option (1 ms) [ok]: GETEX no option (0 ms) [ok]: GETEX syntax errors (0 ms) [ok]: GETEX and GET expired key or not exist (3 ms) [ok]: GETEX no arguments (0 ms) [ok]: GETDEL command (0 ms) [ok]: BLMPOP_LEFT: single existing list - quicklist (50 ms) [ok]: GETDEL propagate as DEL command to replica (83 ms) [ok]: BLMPOP_LEFT: multiple existing lists - quicklist (100 ms) [ok]: BLMPOP_LEFT: second list has an entry - quicklist (50 ms) [ok]: GETEX without argument does not propagate to replica (100 ms) [ok]: MGET (0 ms) [ok]: MGET against non existing key (0 ms) [ok]: MGET against non-string key (1 ms) [ok]: GETSET (set new value) (0 ms) [ok]: GETSET (replace old value) (0 ms) [ok]: MSET base case (1 ms) [ok]: MSET/MSETNX wrong number of args (0 ms) [ok]: MSET with already existing - same key twice (0 ms) [ok]: MSETNX with already existent key (1 ms) [ok]: MSETNX with not existing keys (0 ms) [ok]: MSETNX with not existing keys - same key twice (0 ms) [ok]: MSETNX with already existing keys - same key twice (0 ms) [ok]: STRLEN against non-existing key (0 ms) [ok]: STRLEN against integer-encoded value (0 ms) [ok]: STRLEN against plain string (0 ms) [ok]: SETBIT against non-existing key (0 ms) [ok]: SETBIT against string-encoded key (1 ms) [ok]: SETBIT against integer-encoded key (0 ms) [ok]: SETBIT against key with wrong type (1 ms) [ok]: SETBIT with out of range bit offset (0 ms) [ok]: SETBIT with non-bit argument (1 ms) [ok]: BRPOPLPUSH - quicklist (50 ms) [ok]: BLMOVE left left - quicklist (50 ms) [ok]: BLMOVE left right - quicklist (50 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (1 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (0 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (1 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (0 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (1 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (0 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (0 ms) [ok]: test RESP3/2 set protocol parsing (1 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (0 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (12 ms) [ok]: BLMOVE right left - quicklist (50 ms) [ok]: Script delete the expired key (5 ms) [ok]: TIME command using cached time (11 ms) [ok]: BLMOVE right right - quicklist (49 ms) [ok]: BLPOP: single existing list - listpack (0 ms) [ok]: BLPOP: multiple existing lists - listpack (1 ms) [ok]: BLPOP: second list has an entry - listpack (1 ms) [ok]: BLMPOP_LEFT: single existing list - listpack (0 ms) [ok]: BLMPOP_LEFT: multiple existing lists - listpack (1 ms) [ok]: BLMPOP_LEFT: second list has an entry - listpack (1 ms) [ok]: BRPOPLPUSH - listpack (1 ms) [ok]: BLMOVE left left - listpack (0 ms) [ok]: BLMOVE left right - listpack (1 ms) [ok]: BLMOVE right left - listpack (1 ms) [ok]: BLMOVE right right - listpack (1 ms) [ok]: BLPOP, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLPOP, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL should not awake blocked client (1 ms) [ok]: BLMPOP_LEFT, LPUSH + DEL + SET should not awake blocked client (1 ms) [ok]: SETBIT fuzzing (272 ms) [ok]: GETBIT against non-existing key (0 ms) [ok]: GETBIT against string-encoded key (0 ms) [ok]: GETBIT against integer-encoded key (1 ms) [ok]: SETRANGE against non-existing key (0 ms) [ok]: SETRANGE against string-encoded key (1 ms) [ok]: SETRANGE against integer-encoded key (0 ms) [ok]: SETRANGE against key with wrong type (1 ms) [ok]: SETRANGE with out of range offset (0 ms) [ok]: GETRANGE against non-existing key (0 ms) [ok]: GETRANGE against wrong key type (0 ms) [ok]: GETRANGE against string value (1 ms) [ok]: GETRANGE against integer-encoded value (0 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: XDEL fuzz test (1149 ms) [ok]: HGETEX EX active expiry removes entire key when last field expires (1107 ms) [ok]: HGETEX EX and HPEXPIRE (0 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: BLPOP with same key multiple times should work (issue #801) (102 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLPOP (0 ms) [ok]: BLPOP with variadic LPUSH (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BLMPOP_LEFT (1 ms) [ok]: BLMPOP_LEFT with variadic LPUSH (0 ms) [ok]: BRPOPLPUSH with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE left left with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE left right with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right left with zero timeout should block indefinitely (1 ms) [ok]: BLMOVE right right with zero timeout should block indefinitely (0 ms) [ok]: BLMOVE (left, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (left, right) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, left) with a client BLPOPing the target list (1 ms) [ok]: BLMOVE (right, right) with a client BLPOPing the target list (11 ms) [ok]: BRPOPLPUSH with wrong source type (1 ms) [ok]: BRPOPLPUSH with wrong destination type (1 ms) [ok]: BRPOPLPUSH maintains order of elements after failure (0 ms) [ok]: BRPOPLPUSH with multiple blocked clients (1 ms) [ok]: BLMPOP with multiple blocked clients (13 ms) [ok]: Linked LMOVEs (1 ms) [ok]: Circular BRPOPLPUSH (1 ms) [ok]: Self-referential BRPOPLPUSH (101 ms) [ok]: BRPOPLPUSH inside a transaction (0 ms) [ok]: PUSH resulting from BRPOPLPUSH affect WATCH (1 ms) [ok]: BRPOPLPUSH does not affect WATCH while still blocked (1 ms) [ok]: Script - disallow write on OOM (0 ms) [ok]: EVAL - Does Lua interpreter replies to our requests? (0 ms) [ok]: EVAL - Return _G (0 ms) [ok]: EVAL - Return table with a metatable that raise error (0 ms) [ok]: EVAL - Return table with a metatable that call server (0 ms) [ok]: EVAL - Lua integer -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua string -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua true boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua false boolean -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua status code reply -> Redis protocol type conversion (0 ms) [ok]: EVAL - Lua error reply -> Redis protocol type conversion (1 ms) [ok]: EVAL - Lua table -> Redis protocol type conversion (0 ms) [ok]: EVAL - Are the KEYS and ARGV arrays populated correctly? (0 ms) [ok]: EVAL - is Lua able to call Redis API? (0 ms) [ok]: EVALSHA - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA_RO - Can we call a SHA1 if already defined? (0 ms) [ok]: EVALSHA - Can we call a SHA1 in uppercase? (0 ms) [ok]: EVALSHA - Do we get an error on invalid SHA1? (0 ms) [ok]: EVALSHA - Do we get an error on non defined SHA1? (0 ms) [ok]: EVAL - Redis integer -> Lua type conversion (1 ms) [ok]: EVAL - Lua number -> Redis integer conversion (0 ms) [ok]: EVAL - Redis bulk -> Lua type conversion (0 ms) [ok]: EVAL - Redis multi bulk -> Lua type conversion (1 ms) [ok]: EVAL - Redis status reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis error reply -> Lua type conversion (0 ms) [ok]: EVAL - Redis nil bulk reply -> Lua type conversion (0 ms) [ok]: EVAL - Is the Lua client using the currently selected DB? (0 ms) [ok]: EVAL - SELECT inside Lua should not affect the caller (1 ms) [ok]: EVAL - Scripts do not block on blpop command (0 ms) [ok]: EVAL - Scripts do not block on brpop command (0 ms) [ok]: EVAL - Scripts do not block on brpoplpush command (0 ms) [ok]: EVAL - Scripts do not block on blmove command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmin command (0 ms) [ok]: EVAL - Scripts do not block on bzpopmax command (0 ms) [ok]: EVAL - Scripts do not block on wait (0 ms) [ok]: EVAL - Scripts do not block on waitaof (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option (1 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option (0 ms) [ok]: EVAL - Scripts do not block on XREAD with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts do not block on XREADGROUP with BLOCK option -- non empty stream (0 ms) [ok]: EVAL - Scripts can run non-deterministic commands (0 ms) [ok]: EVAL - No arguments to redis.call/pcall is considered an error (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ok]: EVAL - redis.call variant raises a Lua error on Redis cmd error (1) (0 ms) [ignore]: EVAL - JSON string encoding a string larger than 2GB: large memory flag not provided [ok]: EVAL - JSON numeric decoding (0 ms) [ok]: EVAL - JSON string decoding (0 ms) [ok]: EVAL - JSON smoke test (1 ms) [ok]: EVAL - cmsgpack can pack double? (0 ms) [ok]: EVAL - cmsgpack can pack negative int64? (0 ms) [ok]: EVAL - cmsgpack pack/unpack smoke test (115 ms) [ok]: EVAL - cmsgpack can pack and unpack circular references? (1 ms) [ok]: EVAL - Numerical sanity check from bitop (0 ms) [ok]: EVAL - Verify minimal bitop functionality (0 ms) [ok]: EVAL - Able to parse trailing comments (0 ms) [ok]: EVAL_RO - Successful case (0 ms) [ok]: EVAL_RO - Cannot run write commands (0 ms) [ok]: SCRIPTING FLUSH - is able to clear the scripts cache? (12 ms) [ok]: EVAL - Test table unpack with invalid indexes (0 ms) [ok]: Try trick readonly table on basic types metatable (1 ms) [ok]: Dynamic reset of lua engine with insecure API config change (1 ms) [ok]: SCRIPTING FLUSH ASYNC (9 ms) [ok]: SCRIPT EXISTS - can detect already defined scripts? (0 ms) [ok]: SCRIPT LOAD - is able to register scripts in the scripting cache (0 ms) [ok]: SCRIPT SHOW - is able to dump scripts from the scripting cache (1 ms) [ok]: SCRIPT SHOW - wrong sha1 length or invalid sha1 char return noscript error (0 ms) [ok]: SCRIPT SHOW - script not exist return noscript error (0 ms) [ok]: SORT is normally not alpha re-ordered for the scripting engine (1 ms) [ok]: SORT BY output gets ordered for scripting (0 ms) [ok]: SORT BY with GET gets ordered for scripting (0 ms) [ok]: redis.sha1hex() implementation (0 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (1 ms) [ok]: GETRANGE fuzzing (721 ms) [ok]: Coverage: SUBSTR (0 ms) [ok]: Extended SET can detect syntax errors (0 ms) [ok]: Extended SET NX option (0 ms) [ok]: Extended SET XX option (0 ms) [ok]: Extended SET GET option (0 ms) [ok]: Extended SET GET option with no previous value (1 ms) [ok]: Extended SET GET option with XX (0 ms) [ok]: Extended SET GET option with XX and no previous value (0 ms) [ok]: Extended SET GET option with NX (0 ms) [ok]: Extended SET GET option with NX and previous value (0 ms) [ok]: Extended SET GET with incorrect type should result in wrong type error (1 ms) [ok]: SET with IFEQ conditional (0 ms) [ok]: SET with IFEQ conditional - non-string current value (0 ms) [ok]: SET with IFEQ conditional - with get (2 ms) [ok]: SET with IFEQ conditional - non string current value with get (1 ms) [ok]: SET with IFEQ conditional - with xx (0 ms) [ok]: SET with IFEQ conditional - with nx (1 ms) [ok]: Extended SET EX option (0 ms) [ok]: Extended SET PX option (0 ms) [ok]: Extended SET EXAT option (0 ms) [ok]: Extended SET PXAT option (1 ms) [ok]: SET EXAT / PXAT Expiration time is expired (94 ms) [ok]: Extended SET using multiple options at once (0 ms) [ok]: GETRANGE with huge ranges, Github issue #1844 (1 ms) [ok]: LCS basic (0 ms) [ok]: LCS len (1 ms) [ok]: LCS indexes (1 ms) [ok]: LCS indexes with match len (1 ms) [ok]: LCS indexes with match len and minimum match len (0 ms) [ok]: SETRANGE with huge offset (1 ms) [ok]: APPEND modifies the encoding from int to raw (2 ms) [ok]: DELIFEQ non-existing key (0 ms) [ok]: DELIFEQ existing key, matching value (0 ms) [ok]: DELIFEQ existing key, non-matching value (0 ms) [ok]: DELIFEQ existing key, non-string value (1 ms) [ok]: DELIFEQ propagate as DEL command to replica (93 ms) [43/146 done]: unit/type/string (7 seconds) Testing unit/cluster/cluster-slots [ok]: HGETEX PX active expiry with single field (1111 ms) [ok]: LTRIM stress testing - quicklist (4642 ms) [ok]: BRPOPLPUSH timeout (1013 ms) [ok]: SWAPDB awakes blocked client (1 ms) [ok]: maxmemory - policy volatile-ttl should only remove volatile keys. (2412 ms) [ok]: Measures elapsed time os.clock() (1003 ms) [ok]: Prohibit dangerous lua methods in sandbox (1 ms) [ok]: Verify execution of prohibit dangerous Lua methods will fail (0 ms) [ok]: Globals protection reading an undeclared global variable (1 ms) [ok]: Globals protection setting an undeclared global* (0 ms) [ok]: lua bit.tohex bug (0 ms) [ok]: Test an example script DECR_IF_GT (1 ms) [ok]: random numbers are random now (0 ms) [ok]: Scripting engine PRNG can be seeded correctly (0 ms) [ok]: SWAPDB wants to wake blocked client, but the key already expired (189 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1006 ms) [ok]: ZSCORE - skiplist (14 ms) [ok]: ZMSCORE - skiplist (10 ms) [ok]: ZSCORE after a DEBUG RELOAD - skiplist (14 ms) [ok]: ZSET sorting stresser - skiplist (23 ms) [skip]: slave buffer are counted correctly [ok]: EVAL does not leak in the Lua stack (296 ms) [ok]: MULTI + LPUSH + EXPIRE + DEBUG SLEEP on blocked client, key already expired (301 ms) [ok]: SPOP: We can call scripts rewriting client->argv from Lua (103 ms) [ok]: Test check paused info during the cluster failover in info clients (57 ms) [ok]: MGET: mget shouldn't be propagated in Lua (100 ms) [44/146 done]: unit/pause (14 seconds) Testing unit/cluster/packet [ok]: EXPIRE: We can call scripts rewriting client->argv from Lua (101 ms) [ok]: HGETEX PX active expiry with multiple fields (1106 ms) [ok]: INCRBYFLOAT: We can call scripts expanding client->argv from Lua (309 ms) [ok]: Call Redis command with many args from Lua (issue #1764) (1 ms) [ok]: Number conversion precision test (issue #1118) (0 ms) [ok]: String containing number precision test (regression of issue #1118) (0 ms) [ok]: Verify negative arg count is error instead of crash (issue #1842) (0 ms) [ok]: Scripts can handle commands with incorrect arity (1 ms) [ok]: Correct handling of reused argv (issue #1939) (0 ms) [ok]: Functions in the Redis namespace are able to report errors (0 ms) [ok]: CLUSTER RESET can not be invoke from within a script (0 ms) [ok]: Script with RESP3 map (2 ms) [ok]: expire scan should skip dictionaries with lot's of empty buckets (935 ms) [ok]: Script return recursive object (101 ms) [ok]: Script check unpack with massive arguments (21 ms) [ok]: Script read key with expiration set (1 ms) [ok]: Script del key with expiration set (0 ms) [ok]: Script ACL check (0 ms) [ok]: Binary code loading failed (0 ms) [ok]: Try trick global protection 1 (0 ms) [ok]: Try trick global protection 2 (0 ms) [ok]: Try trick global protection 3 (1 ms) [ok]: Try trick global protection 4 (0 ms) [ok]: Try trick readonly table on valkey table (0 ms) [ok]: Try trick readonly table on json table (0 ms) [ok]: Try trick readonly table on cmsgpack table (0 ms) [ok]: Try trick readonly table on bit table (0 ms) [ok]: Test loadfile are not available (0 ms) [ok]: Test dofile are not available (0 ms) [ok]: Test print are not available (0 ms) [45/146 done]: unit/expire (18 seconds) Testing unit/cluster/slot-migration-response [ignore]: large memory flag not provided [ok]: WAITAOF when replica switches between masters, fsync: no (4357 ms) [ok]: BLPOP unblock but the key is expired and then block again - reprocessing command (1005 ms) [ok]: BLPOP when new key is moved into place (0 ms) [ok]: BLPOP when result key is created by SORT..STORE (1 ms) [ok]: BLMPOP_LEFT when new key is moved into place (0 ms) [ok]: BLMPOP_LEFT when result key is created by SORT..STORE (1 ms) [ok]: BLPOP: timeout value out of range (0 ms) [ok]: BLPOP: with single empty list argument (1 ms) [ok]: BLPOP: with negative timeout (0 ms) [ok]: BLPOP: with non-integer timeout (0 ms) [ok]: BLPOP: with zero timeout should block indefinitely (0 ms) [ok]: BLPOP: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLPOP: second argument is not a list (0 ms) [ok]: ZRANGEBYSCORE fuzzy test, 100 ranges in 100 element sorted set - skiplist (1425 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL (404 ms) [ok]: Timedout read-only scripts can be killed by SCRIPT KILL even when use pcall (37 ms) [ok]: Timedout script does not cause a false dead client (39 ms) [ok]: Timedout script link is still usable after Lua returns (50 ms) [ok]: ZRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (303 ms) [ok]: HGETEX PX active expiry removes entire key when last field expires (1112 ms) [ok]: HGETEX PX and HPEXPIRE (0 ms) [ok]: Timedout scripts and unblocked command (375 ms) [ok]: Timedout scripts that modified data can't be killed by SCRIPT KILL (207 ms) [ok]: SHUTDOWN NOSAVE can kill a timedout script anyway (3 ms) [ok]: ZREMRANGEBYLEX fuzzy test, 100 ranges in 100 element sorted set - skiplist (539 ms) [ok]: BLPOP: timeout (1087 ms) [ok]: ZSETs skiplist implementation backlink consistency test - skiplist (16 ms) [ok]: BLPOP: arguments are empty (2 ms) [ok]: BRPOP: with single empty list argument (1 ms) [ok]: BRPOP: with negative timeout (1 ms) [ok]: BRPOP: with non-integer timeout (0 ms) [ok]: BRPOP: with zero timeout should block indefinitely (2 ms) [ok]: BRPOP: with 0.001 timeout should not block indefinitely (22 ms) [ok]: BRPOP: second argument is not a list (3 ms) [ok]: Packet with missing gossip messages don't cause invalid read (12 ms) [ok]: Before the replica connects we issue two EVAL commands (1 ms) [46/146 done]: unit/cluster/packet (2 seconds) Testing unit/cluster/hostnames [ok]: XRANGE fuzzing (4149 ms) [ok]: XREVRANGE regression test for issue #5006 (1 ms) [ok]: XREAD streamID edge (no-blocking) (0 ms) [ok]: XREAD streamID edge (blocking) (1 ms) [ok]: XADD streamID edge (1 ms) [ok]: XTRIM with MAXLEN option basic test (89 ms) [ok]: XADD with LIMIT consecutive calls (8 ms) [ok]: XTRIM with ~ is limited (17 ms) [ok]: XTRIM without ~ is not limited (8 ms) [ok]: XTRIM without ~ and with LIMIT (9 ms) [ok]: XTRIM with LIMIT delete entries no more than limit (0 ms) [ok]: HGETEX EXAT active expiry with single field (1013 ms) [ok]: XADD with MAXLEN > xlen can propagate correctly (5 ms) [ok]: Cluster is up (7 ms) [ok]: ZSETs ZRANK augmented skip list stress testing - skiplist (841 ms) [ok]: BZPOPMIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZPOPMIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL should not awake blocked client (1 ms) [ok]: BZMPOP_MIN, ZADD + DEL + SET should not awake blocked client (1 ms) [ok]: XADD with MINID > lastid can propagate correctly (8 ms) [ok]: Connect a replica to the master instance (811 ms) [ok]: Now use EVALSHA against the master, with both SHAs (0 ms) [ok]: 'x' should be '4' for EVALSHA being replicated by effects (0 ms) [ok]: Replication of script multiple pushes to list with BLPOP (1 ms) [ok]: EVALSHA replication when first call is readonly (0 ms) [ok]: Lua scripts using SELECT are replicated correctly (1 ms) [ok]: BRPOP: timeout (1063 ms) [ok]: BRPOP: arguments are empty (2 ms) [ok]: BLMPOP_LEFT: with single empty list argument (2 ms) [ok]: BLMPOP_LEFT: with negative timeout (1 ms) [ok]: BLMPOP_LEFT: with non-integer timeout (0 ms) [ok]: BLMPOP_LEFT: with zero timeout should block indefinitely (1 ms) [ok]: XADD with ~ MAXLEN can propagate correctly (7 ms) [ok]: BLMPOP_LEFT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_LEFT: second argument is not a list (1 ms) [ok]: XADD with ~ MAXLEN and LIMIT can propagate correctly (13 ms) [ok]: LTRIM stress testing - listpack (4146 ms) [47/146 done]: unit/type/list-2 (9 seconds) Testing unit/cluster/cli [ok]: HGETEX EXAT active expiry with multiple fields (1008 ms) [ok]: XADD with ~ MINID can propagate correctly (8 ms) [ok]: Set many keys in the cluster (762 ms) [ok]: Test cluster responses during migration of slot x (2 ms) [48/146 done]: unit/cluster/slot-migration-response (3 seconds) Testing unit/cluster/slave-selection [ok]: XADD with ~ MINID and LIMIT can propagate correctly (7 ms) Time: 1002 [ok]: BZPOPMIN unblock but the key is expired and then block again - reprocessing command (1002 ms) [ok]: BZPOPMIN with same key multiple times should work (1 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZPOPMIN (1 ms) [ok]: BZPOPMIN with variadic ZADD (0 ms) [ok]: XTRIM with ~ MAXLEN can propagate correctly (9 ms) [ok]: WAITAOF when replica switches between masters, fsync: everysec (3329 ms) [ok]: BLMPOP_LEFT: timeout (1075 ms) [ok]: BLMPOP_LEFT: arguments are empty (1 ms) [ok]: BLMPOP_RIGHT: with single empty list argument (2 ms) [ok]: BLMPOP_RIGHT: with negative timeout (0 ms) [ok]: BLMPOP_RIGHT: with non-integer timeout (0 ms) [ok]: BLMPOP_RIGHT: with zero timeout should block indefinitely (1 ms) [ok]: XADD can CREATE an empty stream (1 ms) [ok]: XSETID can set a specific ID (0 ms) [ok]: XSETID cannot SETID with smaller ID (0 ms) [ok]: XSETID cannot SETID on non-existent key (1 ms) [ok]: XSETID cannot run with an offset but without a maximal tombstone (0 ms) [ok]: XSETID cannot run with a maximal tombstone but without an offset (0 ms) [ok]: XSETID errors on negative offset (1 ms) [ok]: XSETID cannot set the maximal tombstone with larger ID (0 ms) [ok]: XSETID cannot set the offset to less than the length (0 ms) [ok]: XSETID cannot set smaller ID than current MAXDELETEDID (0 ms) [ok]: BLMPOP_RIGHT: with 0.001 timeout should not block indefinitely (21 ms) [ok]: BLMPOP_RIGHT: second argument is not a list (1 ms) [ok]: XADD advances the entries-added counter and sets the recorded-first-entry-id (3 ms) [ok]: XDEL/TRIM are reflected by recorded first entry (5 ms) [ok]: Maximum XDEL ID behaves correctly (1 ms) [ok]: XADD with artial ID with maximal seq (2 ms) [ok]: HGETEX EXAT active expiry removes entire key when last field expires (1008 ms) [ok]: HGETEX EXAT and HPEXPIRE (0 ms) [ok]: Empty stream can be rewrite into AOF correctly (104 ms) [ok]: Stream can be rewrite into AOF correctly after XDEL lastid (105 ms) [ok]: BZPOPMIN with zero timeout should block indefinitely (1002 ms) [ok]: MULTI/EXEC is isolated from the point of view of BZMPOP_MIN (1 ms) [ok]: BZMPOP_MIN with variadic ZADD (0 ms) [ok]: XGROUP HELP should not have unexpected options (0 ms) [ok]: XINFO HELP should not have unexpected options (0 ms) [ok]: Connect a replica to the master instance (806 ms) [ok]: Redis.replicate_commands() can be issued anywhere now (0 ms) [ok]: Redis.set_repl() can be issued before replicate_commands() now (0 ms) [ok]: Redis.set_repl() don't accept invalid values (1 ms) [ok]: Test selective replication of certain commands from Lua (1 ms) [ok]: PRNG is seeded randomly for command replication (0 ms) [ok]: Using side effects is not a problem with command replication (1 ms) [49/146 done]: unit/type/stream (12 seconds) Testing unit/cluster/manual-takeover [ok]: Stress tester for #3343-alike bugs comp: 2 (10068 ms) [ok]: BLMPOP_RIGHT: timeout (1076 ms) [ok]: BLMPOP_RIGHT: arguments are empty (2 ms) [ok]: BLPOP inside a transaction (0 ms) [ok]: BLMPOP_LEFT inside a transaction (1 ms) [ok]: BLMPOP propagate as pop with count command to replica (200 ms) [ok]: LPUSHX, RPUSHX - generic (4 ms) [ok]: LPUSHX, RPUSHX - quicklist (44 ms) [ok]: LINSERT - quicklist (50 ms) [ok]: LPUSHX, RPUSHX - listpack (1 ms) [ok]: LINSERT - listpack (2 ms) [ok]: LINSERT raise error on bad syntax (0 ms) [ok]: LINSERT against non-list value error (0 ms) [ok]: LINSERT against non existing key (0 ms) [ok]: LINDEX consistency test - listpack (43 ms) [ok]: HGETEX PXAT active expiry with single field (1121 ms) [ok]: LINDEX random access - listpack (26 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (59 ms) [ok]: Create 1 node cluster (1917 ms) [ok]: BZMPOP_MIN with zero timeout should block indefinitely (1001 ms) [ok]: LINDEX consistency test - listpack (123 ms) [ok]: BZPOP/BZMPOP against wrong type (1 ms) [ok]: BZMPOP with illegal argument (1 ms) [ok]: BZMPOP with multiple blocked clients (2 ms) [ok]: LINDEX random access - listpack (53 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - listpack (116 ms) [ok]: BZMPOP propagate as pop with count command to replica (196 ms) [ok]: BZMPOP should not blocks on non key arguments - #10762 (10 ms) [ok]: LINDEX consistency test - quicklist (50 ms) [ok]: LINDEX random access - quicklist (33 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (88 ms) [ok]: replica buffer don't induce eviction (5986 ms) [ok]: LINDEX consistency test - quicklist (92 ms) [ok]: LINDEX random access - quicklist (104 ms) [ok]: WAITAOF when replica switches between masters, fsync: always (2327 ms) [ok]: Test scripting debug protocol parsing (1 ms) [ok]: Test scripting debug lua stack overflow (1 ms) [ok]: Test scripting debug lua server invocations (0 ms) [ok]: Check if list is still ok after a DEBUG RELOAD - quicklist (171 ms) [ok]: LLEN against non-list value error (0 ms) [ok]: LLEN against non existing key (0 ms) [ok]: LINDEX against non-list value error (1 ms) [ok]: LINDEX against non existing key (0 ms) [ok]: LPUSH against non-list value error (0 ms) [ok]: RPUSH against non-list value error (0 ms) [ok]: RPOPLPUSH base case - quicklist (44 ms) [ok]: LMOVE left left base case - quicklist (50 ms) [ok]: Don't rehash if used memory exceeds maxmemory after rehash (140 ms) [ok]: LMOVE left right base case - quicklist (49 ms) [ok]: LMOVE right left base case - quicklist (51 ms) [ok]: HGETEX PXAT active expiry with multiple fields (1116 ms) [ok]: Create 2 node cluster (1020 ms) [ok]: LMOVE right right base case - quicklist (49 ms) [ok]: ZSET skiplist order consistency when elements are moved (747 ms) [ok]: ZRANGESTORE basic (1 ms) [ok]: ZRANGESTORE RESP3 (0 ms) [ok]: ZRANGESTORE range (0 ms) [ok]: ZRANGESTORE BYLEX (0 ms) [ok]: ZRANGESTORE BYSCORE (1 ms) [ok]: ZRANGESTORE BYSCORE LIMIT (0 ms) [ok]: ZRANGESTORE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGE BYSCORE REV LIMIT (0 ms) [ok]: ZRANGESTORE - src key missing (0 ms) [ok]: ZRANGESTORE - src key wrong type (1 ms) [ok]: ZRANGESTORE - empty range (0 ms) [ok]: ZRANGESTORE BYLEX - empty range (0 ms) [ok]: ZRANGESTORE BYSCORE - empty range (0 ms) [ok]: ZRANGE BYLEX (0 ms) [ok]: ZRANGESTORE invalid syntax (0 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 0 #10767 case (1 ms) [ok]: ZRANGESTORE with zset-max-listpack-entries 1 dst key should use skiplist encoding (0 ms) [ok]: ZRANGE invalid syntax (1 ms) [ok]: Lua scripts eviction does not generate many scripts (107 ms) [ok]: ZRANDMEMBER - listpack (4 ms) [ok]: ZRANDMEMBER - skiplist (4 ms) [ok]: ZRANDMEMBER with RESP3 (1 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly (0 ms) [ok]: ZRANDMEMBER with against non existing key (0 ms) [ok]: ZRANDMEMBER count overflow (0 ms) [ok]: ZRANDMEMBER count of 0 is handled correctly - emptyarray (0 ms) [ok]: ZRANDMEMBER with against non existing key - emptyarray (0 ms) [ok]: Lua scripts eviction is plain LRU (38 ms) [ok]: RPOPLPUSH with the same list as src and dst - quicklist (49 ms) [ok]: LMOVE left left with the same list as src and dst - quicklist (49 ms) [ok]: LMOVE left right with the same list as src and dst - quicklist (50 ms) [ok]: Lua scripts eviction does not affect script load (140 ms) [ok]: LMOVE right left with the same list as src and dst - quicklist (50 ms) [ok]: LMOVE right right with the same list as src and dst - quicklist (50 ms) [ok]: ZRANDMEMBER with - skiplist (242 ms) [ok]: Set cluster announced client (TLS) port and check that it propagates (128 ms) [ok]: Lua scripts promoted from eval to script load (114 ms) [ok]: RPOPLPUSH with quicklist source and existing target quicklist (100 ms) [ok]: ZRANDMEMBER with - listpack (161 ms) [ok]: zset score double range (0 ms) [ok]: zunionInterDiffGenericCommand acts on SET and ZSET (7 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single (3 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - multiple (1 ms) [ok]: ZADD overflows the maximum allowed elements in a listpack - single_multiple (1 ms) [ok]: LMOVE left left with quicklist source and existing target quicklist (100 ms) [50/146 done]: unit/type/zset (18 seconds) Testing unit/cluster/slave-stop-cond [ok]: Clear announced client (TLS) port and check that it propagates (208 ms) [ok]: test RESP2/2 big number protocol parsing (1 ms) [ok]: test RESP2/2 malformed big number protocol parsing (0 ms) [ok]: test RESP2/2 map protocol parsing (0 ms) [ok]: test RESP2/2 set protocol parsing (0 ms) [ok]: test RESP2/2 double protocol parsing (0 ms) [ok]: test RESP2/2 null protocol parsing (0 ms) [ok]: test RESP2/2 verbatim protocol parsing (0 ms) [ok]: test RESP2/2 true protocol parsing (0 ms) [ok]: test RESP2/2 false protocol parsing (1 ms) [ok]: test RESP2/3 big number protocol parsing (0 ms) [ok]: test RESP2/3 malformed big number protocol parsing (0 ms) [ok]: test RESP2/3 map protocol parsing (0 ms) [ok]: test RESP2/3 set protocol parsing (0 ms) [ok]: test RESP2/3 double protocol parsing (0 ms) [ok]: test RESP2/3 null protocol parsing (1 ms) [ok]: test RESP2/3 verbatim protocol parsing (0 ms) [ok]: test RESP2/3 true protocol parsing (0 ms) [ok]: test RESP2/3 false protocol parsing (0 ms) [ok]: test RESP3/2 big number protocol parsing (1 ms) [ok]: test RESP3/2 malformed big number protocol parsing (0 ms) [ok]: test RESP3/2 map protocol parsing (1 ms) [ok]: test RESP3/2 set protocol parsing (0 ms) [ok]: test RESP3/2 double protocol parsing (0 ms) [ok]: test RESP3/2 null protocol parsing (0 ms) [ok]: test RESP3/2 verbatim protocol parsing (0 ms) [ok]: test RESP3/2 true protocol parsing (0 ms) [ok]: test RESP3/2 false protocol parsing (0 ms) [ok]: test RESP3/3 big number protocol parsing (0 ms) [ok]: test RESP3/3 malformed big number protocol parsing (1 ms) [ok]: test RESP3/3 map protocol parsing (0 ms) [ok]: test RESP3/3 set protocol parsing (0 ms) [ok]: test RESP3/3 double protocol parsing (0 ms) [ok]: test RESP3/3 null protocol parsing (0 ms) [ok]: test RESP3/3 verbatim protocol parsing (0 ms) [ok]: test RESP3/3 true protocol parsing (0 ms) [ok]: test RESP3/3 false protocol parsing (0 ms) [ok]: test resp3 attribute protocol parsing (0 ms) [ok]: Script block the time during execution (11 ms) [ok]: Script delete the expired key (5 ms) [ok]: TIME command using cached time (10 ms) [ok]: LMOVE left right with quicklist source and existing target quicklist (99 ms) [ok]: Script block the time in some expiration related commands (82 ms) [ok]: RESTORE expired keys with expiration time (10 ms) [ok]: LMOVE right left with quicklist source and existing target quicklist (100 ms) [ok]: LMOVE right right with quicklist source and existing target quicklist (100 ms) [ok]: RPOPLPUSH with quicklist source and existing target listpack (50 ms) [ok]: LMOVE left left with quicklist source and existing target listpack (50 ms) [ok]: Shebang support for lua engine (1 ms) [ok]: Unknown shebang option (0 ms) [ok]: Unknown shebang flag (0 ms) [ok]: allow-oom shebang flag (1 ms) [ok]: no-writes shebang flag (0 ms) [ok]: LMOVE left right with quicklist source and existing target listpack (50 ms) [ok]: setup replication for following tests (809 ms) [ok]: LMOVE right left with quicklist source and existing target listpack (50 ms) [ok]: LMOVE right right with quicklist source and existing target listpack (50 ms) [ok]: RPOPLPUSH base case - listpack (0 ms) [ok]: LMOVE left left base case - listpack (1 ms) [ok]: LMOVE left right base case - listpack (0 ms) [ok]: LMOVE right left base case - listpack (2 ms) [ok]: LMOVE right right base case - listpack (1 ms) [ok]: RPOPLPUSH with the same list as src and dst - listpack (0 ms) [ok]: LMOVE left left with the same list as src and dst - listpack (1 ms) [ok]: LMOVE left right with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right left with the same list as src and dst - listpack (0 ms) [ok]: LMOVE right right with the same list as src and dst - listpack (1 ms) [ok]: RPOPLPUSH with listpack source and existing target quicklist (43 ms) [ok]: HGETEX PXAT active expiry removes entire key when last field expires (1109 ms) [ok]: HGETEX PXAT and HPEXPIRE (1 ms) [ok]: LMOVE left left with listpack source and existing target quicklist (50 ms) [51/146 done]: unit/cluster/announce-client-ports (12 seconds) Testing unit/cluster/replica-migration [ok]: LMOVE left right with listpack source and existing target quicklist (50 ms) [ok]: LMOVE right left with listpack source and existing target quicklist (50 ms) [ok]: LMOVE right right with listpack source and existing target quicklist (50 ms) [ok]: RPOPLPUSH with listpack source and existing target listpack (1 ms) [ok]: LMOVE left left with listpack source and existing target listpack (0 ms) [ok]: LMOVE left right with listpack source and existing target listpack (1 ms) [ok]: LMOVE right left with listpack source and existing target listpack (0 ms) [ok]: LMOVE right right with listpack source and existing target listpack (0 ms) [ok]: RPOPLPUSH against non existing key (0 ms) [ok]: RPOPLPUSH against non list src key (0 ms) [ok]: HGETEX PERSIST removes expiry and prevents active expiry (201 ms) [ok]: RPOPLPUSH against non list dst key - quicklist (45 ms) [ok]: RPOPLPUSH against non list dst key - listpack (0 ms) [ok]: RPOPLPUSH against non existing src key (0 ms) [ok]: General command interface (6 ms) [ok]: Basic LPOP/RPOP/LMPOP - quicklist (100 ms) [ok]: Basic LPOP/RPOP/LMPOP - listpack (0 ms) [ok]: LPOP/RPOP/LMPOP against empty list (1 ms) [ok]: LPOP/RPOP/LMPOP NON-BLOCK or BLOCK against non list value (0 ms) [ok]: client tracking don't cause eviction feedback loop (1340 ms) [ok]: Mass RPOP/LPOP - listpack (21 ms) [ok]: Mass RPOP/LPOP - listpack (38 ms) [ok]: LMPOP with illegal argument (1 ms) [ok]: HGETEX overwrite existing expiry with active expiry (201 ms) [ok]: LMPOP single existing list - quicklist (149 ms) [ok]: propagation with eviction (89 ms) [ok]: CLUSTER MIGRATESLOTS already migrating (317 ms) [ok]: LMPOP multiple existing lists - quicklist (200 ms) [ok]: LMPOP single existing list - listpack (1 ms) [ok]: LMPOP multiple existing lists - listpack (2 ms) [ok]: no-writes shebang flag on replica (913 ms) [ok]: CLUSTER GETSLOTMIGRATIONS command config enforced (202 ms) [ok]: WAIT and WAITAOF replica multiple clients unblock - reuse last result (973 ms) [ok]: LMPOP propagate as pop with count command to replica (92 ms) [ok]: Cluster should start ok (50 ms) [ok]: LRANGE basics - quicklist (46 ms) [ok]: Killing two slave nodes (12 ms) [ok]: not enough good replicas (5 ms) [ok]: propagation with eviction in MULTI (93 ms) [ok]: LRANGE inverted indexes - quicklist (51 ms) [ok]: Cluster should be still up (51 ms) [ok]: Killing one master node (5 ms) [ok]: LRANGE out of range indexes including the full list - quicklist (46 ms) [ok]: Cluster should be down now (50 ms) [ok]: Restarting master node (5 ms) [52/146 done]: unit/wait (37 seconds) Testing unit/cluster/transactions-on-replica [ok]: LRANGE out of range negative end index - quicklist (50 ms) [ok]: LRANGE basics - listpack (0 ms) [ok]: LRANGE inverted indexes - listpack (1 ms) [ok]: LRANGE out of range indexes including the full list - listpack (0 ms) [ok]: LRANGE out of range negative end index - listpack (0 ms) [ok]: LRANGE against non existing key (0 ms) [ok]: LRANGE with start > end yields an empty array for backward compatibility (1 ms) [ok]: Cluster should be up again (50 ms) [ok]: lru/lfu value of the key just added (0 ms) [ok]: Import mode should forbid eviction (1 ms) [ok]: not enough good replicas state change during long script (524 ms) [ok]: allow-stale shebang flag (1 ms) [ok]: reject script do not cause a Lua stack leak (3 ms) [ok]: Create 3 node cluster (1925 ms) [ok]: Run blocking command on cluster node3 (1 ms) [ok]: Perform a Resharding (13 ms) [53/146 done]: unit/maxmemory (37 seconds) Testing unit/cluster/update-msg [ok]: Verify command got unblocked after resharding (35 ms) [ok]: Wait for cluster to be stable (11 ms) [ok]: use previous hostip in "cluster-preferred-endpoint-type unknown-endpoint" mode (3 ms) [ok]: Sanity test push cmd after resharding (1 ms) [ok]: Run blocking command again on cluster node1 (0 ms) [ok]: HGETEX EX keyspace notifications for active expiry (1106 ms) [ok]: Consistent eval error reporting (8 ms) [ok]: LUA redis.error_reply API (1 ms) [ok]: LUA redis.error_reply API with empty string (0 ms) [ok]: LUA redis.status_reply API (1 ms) [ok]: LUA redis.error_reply API sanitation (0 ms) [ok]: LUA error function API sanitation (0 ms) [ok]: LUA test pcall (0 ms) [ok]: LUA test pcall with error (1 ms) [ok]: LUA test pcall with non string/integer arg (0 ms) [ok]: LUA test trim string as expected (0 ms) [ok]: EVAL - Scripts support NULL byte (0 ms) [ok]: EVAL - explicit error() call handling (1 ms) [ok]: LTRIM basics - quicklist (631 ms) [54/146 done]: unit/scripting (37 seconds) Testing unit/cluster/consistency-check [ok]: LTRIM out of range negative end index - quicklist (96 ms) [ok]: LSET - quicklist (51 ms) [ok]: LSET out of range index - quicklist (0 ms) [ok]: LTRIM basics - listpack (5 ms) [ok]: LTRIM out of range negative end index - listpack (1 ms) [ok]: LSET - listpack (1 ms) [ok]: LSET out of range index - listpack (0 ms) [ok]: LSET against non existing key (0 ms) [ok]: LSET against non list value (0 ms) [ok]: LREM remove all the occurrences - quicklist (43 ms) [ok]: LREM remove the first occurrence - quicklist (0 ms) [ok]: LREM remove non existing element - quicklist (0 ms) [ok]: LREM starting from tail with negative count - quicklist (60 ms) [ok]: LREM starting from tail with negative count (2) - quicklist (0 ms) [ok]: LREM deleting objects that may be int encoded - quicklist (59 ms) [ok]: LREM remove all the occurrences - listpack (1 ms) [ok]: LREM remove the first occurrence - listpack (0 ms) [ok]: LREM remove non existing element - listpack (0 ms) [ok]: LREM starting from tail with negative count - listpack (1 ms) [ok]: LREM starting from tail with negative count (2) - listpack (0 ms) [ok]: LREM deleting objects that may be int encoded - listpack (1 ms) [ok]: Regression for bug 593 - chaining BRPOPLPUSH with other blocking cmds (1 ms) [ok]: BLPOP/BLMOVE should increase dirty (2 ms) [ok]: client unblock tests (3 ms) [ok]: client unblock tests (5 ms) [ok]: List listpack -> quicklist encoding conversion (2 ms) Waiting for process 61273 to exit... [ok]: List listpack -> quicklist encoding conversion (215 ms) [ok]: List quicklist -> listpack encoding conversion (260 ms) [ok]: List encoding conversion when RDB loading (8 ms) [ok]: List invalid list-max-listpack-size config (61 ms) [ok]: HGETEX PX keyspace notifications for active expiry (1110 ms) [ok]: List of various encodings (104 ms) [ok]: List of various encodings - sanitize dump (2 ms) [ok]: Unblock fairness is kept while pipelining (1 ms) [ok]: Unblock fairness is kept during nested unblock (2 ms) [ok]: Blocking command accounted only once in commandstats (1 ms) [ok]: Blocking command accounted only once in commandstats after timeout (1 ms) [ok]: Command being unblocked cause another command to get unblocked execution order test (95 ms) [ok]: Kill a cluster node and wait for fail state (1372 ms) [ok]: Verify command got unblocked after cluster failure (60 ms) Waiting for process 61273 to exit... [ok]: HGETEX EXAT keyspace notifications for active expiry (1109 ms) [ok]: Blocking timeout following PAUSE should honor the timeout (1017 ms) [ok]: CLIENT NO-TOUCH with BRPOP and RPUSH regression test (1 ms) [55/146 done]: unit/type/list (17 seconds) Testing unit/cluster/auto-failover-on-shutdown [ok]: CLUSTER GETSLOTMIGRATIONS command reported fields (3322 ms) Waiting for process 61273 to exit... [ok]: CLUSTER GETSLOTMIGRATIONS command log removed over max len (106 ms) [ok]: Manual and atomic slot migration are mutually exclusive (110 ms) [ok]: Test CLUSTER CANCELSLOTMIGRATIONS (324 ms) [ok]: HGETEX PXAT keyspace notifications for active expiry (1108 ms) [ok]: Slot migration won't migrate the functions (442 ms) Waiting for process 61273 to exit... [ok]: Single source import - one shot (283 ms) [ok]: Set cluster hostnames and verify they are propagated (222 ms) [ok]: Update hostnames and make sure they are all eventually propagated (223 ms) [ok]: HGETEX keyspace notification when key deleted with active expiry (1109 ms) [ok]: Remove hostnames and make sure they are all eventually propagated (214 ms) [ok]: Verify cluster-preferred-endpoint-type behavior for redirects and info (118 ms) [ok]: Slot migration DBSIZE after migration (808 ms) Waiting for process 61273 to exit... [ok]: Single source import - two phase (377 ms) [ok]: Functions are added to new node on valkey-cli cluster add-node (3007 ms) [ok]: Stress tester for #3343-alike bugs comp: 1 (9390 ms) [ok]: Slot migration seen in client flags (343 ms) [ok]: HSETEX EX single field expires leaving other fields intact (1106 ms) [ok]: Verify the nodes configured with prefer hostname only show hostname for new nodes (1027 ms) Waiting for process 61273 to exit... [ok]: Test restart will keep hostname information (219 ms) [ok]: Test hostname validation (0 ms) [56/146 done]: unit/cluster/hostnames (14 seconds) Testing unit/cluster/failover [ok]: Cluster is up (78 ms) [ok]: The first master has actually two slaves (0 ms) [ok]: CLUSTER SLAVES and CLUSTER REPLICAS output is consistent (2 ms) [ok]: Slaves of #0 are instance #5 and #10 as expected (0 ms) [ok]: Instance #5 and #10 synced with the master (1 ms) [ok]: Import with hz set to 1 (1193 ms) [ok]: HSETEX EX multiple fields expire leaving non-expired fields intact (1107 ms) [ok]: Slaves are both able to receive and acknowledge writes (31 ms) Waiting for process 61273 to exit... [ok]: Cluster is up (50 ms) [ok]: Cluster is writable (49 ms) [ok]: Killing majority of master nodes (16 ms) [ok]: HSETEX EX hash key deleted when all fields expire (1107 ms) [ok]: HSETEX EX after HSETEX EX (0 ms) [ok]: Single source import - Incremental Command Coverage (1199 ms) Waiting for process 61273 to exit... [ok]: Importing key containment (slot 0 from node 0 to 2) - start migration (159 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - DBSIZE command excludes importing keys (2 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - KEYS command excludes importing keys (0 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - SCAN command excludes importing keys (0 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - RANDOMKEY command excludes importing keys (1 ms) [ok]: Let nodes converge after importing key containment tests (0 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - DBSIZE command excludes importing keys (0 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - KEYS command excludes importing keys (1 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - SCAN command excludes importing keys (0 ms) [ok]: Replica importing key containment (slot 0 from node 0 to 2) - RANDOMKEY command excludes importing keys (1 ms) [ok]: Let nodes converge after importing key containment tests (1 ms) [ok]: Fuzzing dense/sparse encoding: Server should always detect errors (47767 ms) [ok]: PFADD, PFCOUNT, PFMERGE type checking works (1 ms) [ok]: PFMERGE results on the cardinality of union of sets (0 ms) [ok]: PFMERGE on missing source keys will create an empty destkey (0 ms) [ok]: PFMERGE with one empty input key, create an empty destkey (1 ms) [ok]: PFMERGE with one non-empty input key, dest key is actually one of the source keys (0 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - allkeys-random eviction excludes importing keys (133 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - allkeys-lru eviction excludes importing keys (119 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - allkeys-lfu eviction excludes importing keys (192 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-random eviction excludes importing keys (214 ms) [ok]: HSETEX PX single field expires leaving other fields intact (1005 ms) [ok]: PFMERGE results with simd (807 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-lru eviction excludes importing keys (270 ms) Waiting for process 61273 to exit... [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-lfu eviction excludes importing keys (300 ms) [ok]: Cluster is up (56 ms) [ok]: The first master has actually one slave (0 ms) [ok]: Slaves of #0 is instance #5 as expected (0 ms) [ok]: Instance #5 synced with the master (0 ms) [ok]: Lower the slave validity factor of #5 to the value of 2 (0 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - volatile-ttl eviction excludes importing keys (292 ms) [ok]: Cluster should start ok (11 ms) [ok]: Can't read from replica without READONLY (1 ms) [ok]: Can't read from replica after READWRITE (0 ms) [ok]: Can read from replica after READONLY (1 ms) [ok]: Can perform HSET primary and HGET from replica (1 ms) [ok]: Can MULTI-EXEC transaction of HGET operations from replica (0 ms) [ok]: MULTI-EXEC with write operations is MOVED (0 ms) [ok]: HSETEX PX multiple fields expire leaving non-expired fields intact (1007 ms) [ok]: Cluster should eventually be down (3236 ms) [ok]: Use takeover to bring slaves back (15 ms) [ok]: Primary importing key containment (slot 0 from node 0 to 2) - active expiration excludes importing keys (922 ms) [ok]: Importing key containment (slot 16383 from node 2 to 0) - start migration (153 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - DBSIZE command excludes importing keys (1 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - KEYS command excludes importing keys (0 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - SCAN command excludes importing keys (1 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - RANDOMKEY command excludes importing keys (0 ms) [ok]: Let nodes converge after importing key containment tests (0 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - DBSIZE command excludes importing keys (1 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - KEYS command excludes importing keys (0 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - SCAN command excludes importing keys (1 ms) [ok]: Replica importing key containment (slot 16383 from node 2 to 0) - RANDOMKEY command excludes importing keys (0 ms) [ok]: Let nodes converge after importing key containment tests (0 ms) Waiting for process 61249 to exit... [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - allkeys-random eviction excludes importing keys (114 ms) [ok]: HSETEX PX hash key deleted when all fields expire (1005 ms) [ok]: HSETEX PX after HSETEX PX (1 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - allkeys-lru eviction excludes importing keys (115 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - allkeys-lfu eviction excludes importing keys (189 ms) [ok]: HSETEX EXAT single field expires leaving other fields intact (404 ms) [ok]: Cluster is up (55 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-random eviction excludes importing keys (239 ms) [ok]: Cluster is writable (56 ms) [ok]: Instance #5 is a slave (0 ms) [ok]: Instance #5 synced with the master (0 ms) [ok]: Killing one master node (6 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-lru eviction excludes importing keys (279 ms) [ok]: Cluster should start ok (56 ms) [ok]: Cluster is writable (52 ms) Waiting for process 61249 to exit... [ok]: write command is QUEUED, then EXEC should be MOVED after failover (2016 ms) [ok]: read-only blocking operations from replica (2 ms) [ok]: reply MOVED when eval from replica for update (0 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-lfu eviction excludes importing keys (322 ms) [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - volatile-ttl eviction excludes importing keys (295 ms) [ok]: HSETEX EXAT multiple fields expire leaving non-expired fields intact (1007 ms) [57/146 done]: unit/cluster/transactions-on-replica (13 seconds) Testing unit/cluster/noaddr Waiting for process 61249 to exit... [ok]: Primary importing key containment (slot 16383 from node 2 to 0) - active expiration excludes importing keys (923 ms) [ok]: HSETEX EXAT hash key deleted when all fields expire (906 ms) [ok]: HSETEX EXAT after HSETEX EXAT (0 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #1 (4436 ms) [ok]: Cluster should eventually be up again (3043 ms) [ok]: Cluster is writable (39 ms) [ok]: Instance #5, #6, #7 are now masters (1 ms) [ok]: Restarting the previously killed master nodes (1 ms) [ok]: Instance #0, #1, #2 gets converted into a slaves (17 ms) [ok]: Simultaneous imports (496 ms) Waiting for process 61249 to exit... [ok]: Simultaneous exports (506 ms) [ok]: HSETEX PXAT single field expires leaving other fields intact (1106 ms) [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - shutdown - shutdown-timeout: 0 (927 ms) [ok]: Unable to find a replica to perform an auto failover - shutdown (15 ms) [ok]: Multiple slot ranges from same source (401 ms) [58/146 done]: unit/cluster/manual-takeover (19 seconds) Testing unit/cluster/announce-client-ip Port 25622 was already busy, trying another port... [ok]: Wait for failover (3429 ms) [ok]: Import slot range with multiple slots (272 ms) [ok]: PFCOUNT multiple-keys merge returns cardinality of union #2 (1468 ms) [ok]: Cluster should eventually be up again (105 ms) [ok]: Slave expired keys is loaded when restarted: appendonly=no (3171 ms) [ok]: Cluster is writable (50 ms) [ok]: Instance #5 is now a master (0 ms) [ok]: Killing the new master #5 (7 ms) Waiting for process 61249 to exit... [ok]: Import multiple slot ranges with multiple slots (291 ms) [ok]: Export all slots from node (172 ms) [ok]: HSETEX PXAT multiple fields expire leaving non-expired fields intact (1110 ms) Port 25628 was already busy, trying another port... [ok]: Import slots to node with no slots (183 ms) [ok]: PFDEBUG GETREG returns the HyperLogLog raw registers (739 ms) [ok]: PFADD / PFCOUNT cache invalidation works (0 ms) [59/146 done]: unit/hyperloglog (57 seconds) Testing unit/cluster/divergent-cluster-shardid-conf [ok]: Partial data removed on cancel (193 ms) [ok]: OOM on target aborts migration (203 ms) Waiting for process 61249 to exit... [ok]: Partial data in replica removed on failover (303 ms) [ok]: Slot export failed on failover (292 ms) [ok]: HSETEX PXAT hash key deleted when all fields expire (1107 ms) [ok]: HSETEX PXAT after HSETEX PXAT (0 ms) [ok]: Stress tester for #3343-alike bugs comp: 0 (11220 ms) [ok]: divergent cluster shardid conflict (874 ms) [60/146 done]: unit/cluster/divergent-cluster-shardid-conf (1 seconds) Testing unit/cluster/multi-slot-operations [ok]: HPERSIST cancels HSETEX expiry preventing field deletion (201 ms) [ok]: Write data while slave #10 is paused and can't receive it (10010 ms) [ok]: Slots split across shards during import (361 ms) [ok]: Migrate the last slot away from a node using valkey-cli (11182 ms) [ok]: HSETEX overwrites existing field expiry with new shorter expiry (202 ms) Waiting for process 61249 to exit... [ok]: Cluster is up (49 ms) [ok]: Cluster is writable (42 ms) [ok]: Instance #5 is a slave (1 ms) [ok]: Instance #5 synced with the master (0 ms) [ok]: Killing one master node (6 ms) [ok]: HSETEX EX - keyspace notifications fired on field expiry (1108 ms) Waiting for process 61249 to exit... [ok]: Slave expired keys is loaded when restarted: appendonly=yes (3220 ms) [ok]: Cluster should be down now (3239 ms) [ok]: Restarting the old master node (1 ms) [ok]: Instance #0 gets converted into a slave (55 ms) [ok]: Restarting the new master node (1 ms) [ok]: Cluster is up again (362 ms) [ok]: Export unpauses itself even if slot failover doesn't occur (2173 ms) [ok]: Continuous slots distribution (7 ms) [ok]: ADDSLOTS command with several boundary conditions test suite (1 ms) [ok]: ADDSLOTSRANGE command with several boundary conditions test suite (0 ms) [ok]: DELSLOTSRANGE command with several boundary conditions test suite (3 ms) [ok]: HSETEX PX - keyspace notifications fired on field expiry (1108 ms) [ok]: Export unpauses when cancelled (158 ms) Waiting for process 61249 to exit... [ok]: HSETEX EXAT - keyspace notifications fired on field expiry (102 ms) [ok]: valkey-cli -4 --cluster create using 127.0.0.1 with cluster-port (1919 ms) [61/146 done]: unit/cluster/consistency-check (19 seconds) Testing unit/cluster/slot-ownership [62/146 done]: unit/cluster/multi-slot-operations (3 seconds) Testing unit/cluster/no-failover-option [63/146 done]: unit/cluster/update-msg (20 seconds) Testing unit/cluster/cluster-reliable-meet [ok]: Blocked clients are sent MOVED after export completion (437 ms) [ok]: CLUSTER SYNCSLOTS invalid state machine traversal (7 ms) [ok]: CLUSTER SYNCSLOTS ESTABLISH command interface (149 ms) [ok]: Cluster nodes are reachable (1 ms) [ok]: Before slots allocation, all nodes report cluster failure (11 ms) [ok]: Cluster nodes haven't met each other (1 ms) [ok]: Allocate slots (124 ms) [ok]: HSETEX PXAT - keyspace notifications fired on field expiry (1107 ms) [ok]: FLUSH on target during import (628 ms) [ok]: valkey-cli -4 --cluster add-node using 127.0.0.1 with cluster-port (1126 ms) [64/146 done]: unit/cluster/faildet (33 seconds) Testing unit/cluster/cluster-shards [ok]: HSETEX - keyspace notifications include del event when hash key removed (202 ms) [ok]: Active expiry deletes entire key when only field expires (202 ms) [ok]: Active expiry removes only expired field while preserving others (202 ms) [ok]: Wait for failover (3476 ms) [ok]: FLUSH on source during export (954 ms) [ok]: Cluster should eventually be up again (105 ms) [ok]: Cluster is writable (59 ms) [ok]: Instance #5 is now a master (0 ms) [ok]: Restarting the previously killed master node (1 ms) [ok]: Instance #0 gets converted into a slave (32 ms) [ok]: Active expiry reclaims memory correctly with large hash containing many fields (1192 ms) [ok]: MEET is reliable when target drops the initial MEETs (2587 ms) [ok]: Wait for instance #5 (and not #10) to turn into a master (6202 ms) [ok]: Wait for the node #10 to return alive before ending the test (3 ms) [ok]: Cluster should eventually be up again (126 ms) [ok]: Node #10 should eventually replicate node #5 (1 ms) [ok]: Active expiry handles fields with different TTL values correctly (1005 ms) [ok]: Active expiry removes only specified fields leaving others intact (102 ms) [ok]: Field TTL is removed when field value is overwritten with HSET (1 ms) [ok]: valkey-cli -4 --cluster create using localhost with cluster-port (1923 ms) [ok]: Field TTL is cleared when field is deleted and recreated (200 ms) [ok]: NOADDR nodes will be marked as FAIL (436 ms) [ok]: Import cancelled when source hangs (2996 ms) [ok]: HEXPIRE active expiry on single field (1005 ms) [ok]: valkey-cli -4 --cluster add-node using localhost with cluster-port (1130 ms) [65/146 done]: unit/cluster/noaddr (12 seconds) Testing unit/cluster/pubsubshard-slot-migration [ok]: Set cluster announced IPv4 to invalid IP (0 ms) [ok]: HEXPIRE active expiry with multiple fields (1005 ms) [ok]: Set cluster announced IPv4 and check that it propagates (210 ms) [ok]: Clear announced client IPv4 and check that it propagates (211 ms) [ok]: HEXPIRE active expiry removes entire key when last field expires (1106 ms) [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - sigterm - shutdown-timeout: 0 (1024 ms) [ok]: Unable to find a replica to perform an auto failover - sigterm (59 ms) [ok]: Create 3 node cluster (1924 ms) [ok]: Multi-database fill slot 0 (22 ms) [ok]: Perform a Multi-database Resharding (39 ms) [ok]: Verify multi-database slot migrate (19 ms) [ok]: Migrated replica reports zero repl offset and rank, and fails to win election - shutdown (17668 ms) [ok]: Export cancelled when target hangs (2994 ms) [66/146 done]: unit/cluster/cli (33 seconds) Testing unit/cluster/links [ok]: Import with AUTH on (292 ms) [ok]: Import AUTH with WRONGPASS (39 ms) Port 25634 was already busy, trying another port... [ok]: Connection drop during import causes failure (194 ms) [ok]: HEXPIRE active expiry with non-existing fields (1502 ms) [ok]: Export client buffer enforcement (822 ms) [ok]: HEXPIRE active expiry with mixed existing and non-existing fields (1005 ms) [ok]: Slot importing with some non-importing data (618 ms) [ok]: Break master-slave link and prevent further reconnections (20008 ms) [ok]: Slave #5 is reachable and alive (0 ms) [ok]: ziplist implementation: value encoding and backlink (12904 ms) [ok]: Export client buffer excluded from maxmemory (756 ms) [ok]: Verify that slot ownership transfer through gossip propagates deletes to replicas (170 ms) [ok]: Cluster is up (31 ms) [ok]: Instance #3 is a replica (2 ms) [ok]: Instance #3 synced with the master (0 ms) [ok]: Migration not cancelled when snapshot takes more time than repl-timeout (249 ms) [ok]: The nofailover flag is propagated (105 ms) [ok]: Killing one master node (6 ms) [ok]: HEXPIRE active expiry with already expired fields (2015 ms) [ok]: Cluster should start ok (29 ms) [ok]: Cluster shards response is ok for shard 0 (2 ms) [ok]: Kill a node and tell the replica to immediately takeover (6 ms) [ok]: HPEXPIRE active expiry on single field (1114 ms) [ok]: HPEXPIRE active expiry with multiple fields (1105 ms) [ok]: Cluster should be still down after some time (3181 ms) [ok]: Instance #3 is still a replica (1 ms) [ok]: Restarting the previously killed master node (0 ms) [ok]: Restart target primary during migration (without save) causes failure (3463 ms) [ok]: Handshake eventually succeeds after node handshake timeout on both sides with inconsistent view of the cluster (9055 ms) [ok]: Cluster is up (44 ms) [ok]: Cluster is writable (53 ms) [67/146 done]: unit/cluster/no-failover-option (14 seconds) Testing unit/cluster/shardid-propagation [ok]: Killing the first primary node (6 ms) [ok]: Cluster nodes are reachable (0 ms) [ok]: Before slots allocation, all nodes report cluster failure (11 ms) [ok]: Cluster nodes haven't met each other (1 ms) [ok]: HPEXPIRE active expiry removes entire key when last field expires (1106 ms) [ok]: Allocate slots (80 ms) [ok]: Verify health as fail for killed node (3165 ms) [ok]: CLUSTER SHARDS slot response is non-empty when primary node fails (1 ms) [ok]: Restart of node in cluster mode doesn't cause nodes.conf corruption due to shard id mismatch (409 ms) [68/146 done]: unit/cluster/cluster-shards (14 seconds) Testing unit/cluster/scripting [ok]: ziplist implementation: encoding stress testing (5641 ms) [69/146 done]: unit/type/list-3 (50 seconds) Testing unit/cluster/slot-migration [ok]: Cluster is up (28 ms) [ok]: Migrate a slot, verify client receives sunsubscribe on primary serving the slot. (4 ms) [ok]: Client subscribes to multiple channels, migrate a slot, verify client receives sunsubscribe on primary serving the slot. (25 ms) [ok]: Migrate a slot, verify client receives sunsubscribe on replica serving the slot. (29 ms) [ok]: Move a replica to another primary, verify client receives sunsubscribe on replica serving the slot. (26 ms) [ok]: Delete a slot, verify sunsubscribe message (2 ms) [ok]: Reset cluster, verify sunsubscribe message (7 ms) [ok]: HPEXPIRE active expiry with non-existing fields (1502 ms) [ok]: Cluster is up (94 ms) [ok]: The first master has actually 5 slaves (1 ms) [ok]: Slaves of #0 are instance #3, #6, #9, #12 and #15 as expected (0 ms) [ok]: Instance #3, #6, #9, #12 and #15 synced with the master (1 ms) Waiting for process 5541 to exit... [ok]: Set cluster announced IPv6 to invalid IP (0 ms) [ok]: Set cluster announced IPv6 and check that it propagates (208 ms) [ok]: HPEXPIRE active expiry with mixed existing and non-existing fields (1105 ms) [ok]: Eval scripts with shebangs and functions default to no cross slots (1 ms) [ok]: Cross slot commands are allowed by default for eval scripts and with allow-cross-slot-keys flag (1 ms) [ok]: Cross slot commands are also blocked if they disagree with pre-declared keys (1 ms) [ok]: Cross slot commands are allowed by default if they disagree with pre-declared keys (0 ms) [ok]: Function no-cluster flag (0 ms) [ok]: Script no-cluster flag (1 ms) [ok]: Calling cluster slots in scripts is OK (0 ms) [ok]: Calling cluster shards in scripts is OK (0 ms) [70/146 done]: unit/cluster/scripting (2 seconds) Testing unit/cluster/slot-stats [ok]: Restart target primary during migration (with save) causes failure (3380 ms) [ok]: Clear announced client IPv6 and check that it propagates (208 ms) [71/146 done]: unit/cluster/pubsubshard-slot-migration (13 seconds) Testing unit/cluster/half-migrated-slot [ok]: Wait for failover (3486 ms) [ok]: Cluster should eventually be up again (95 ms) [ok]: Restarting the previously killed primary node (0 ms) [ok]: Instance #0 gets converted into a replica (22 ms) [ok]: Make sure the replicas always get the different ranks (2 ms) [ok]: Broadcast message across a cluster shard while a cluster link is down (103 ms) [72/146 done]: unit/cluster/failover (32 seconds) Testing unit/cluster/human-announced-nodename [ok]: HPEXPIRE active expiry with already expired fields (2211 ms) [ok]: Slave #5 should not be able to failover (10003 ms) [ok]: Cluster is up (9 ms) [ok]: Cluster should be down (60 ms) [ok]: Half init migration in 'migrating' is fixable (18 ms) [ok]: Half init migration in 'importing' is fixable (17 ms) [ok]: Init migration and move key (45 ms) [ok]: Move key again (4 ms) [ok]: Half-finish migration (49 ms) [ok]: Move key back (2 ms) [ok]: Half-finish importing (42 ms) [73/146 done]: unit/cluster/half-migrated-slot (2 seconds) Testing unit/cluster/failure-marking [ok]: Load cluster announced IPv4 config on server start (190 ms) [74/146 done]: unit/cluster/slave-stop-cond (43 seconds) Testing unit/cluster/cluster-multiple-meets [ok]: HEXPIREAT active expiry on single field (1005 ms) [ok]: Cluster nodes are reachable (0 ms) [ok]: Before slots allocation, all nodes report cluster failure (9 ms) [ok]: Cluster nodes haven't met each other (1 ms) [ok]: Allocate slots (121 ms) [ok]: Restart source primary during migration (without save) causes failure (3435 ms) [ok]: CLUSTER SLOT-STATS cpu-usec reset upon CONFIG RESETSTAT. (1898 ms) [ok]: Set cluster human announced nodename and let it propagate (209 ms) [ok]: HEXPIREAT active expiry with multiple fields (1005 ms) [ok]: Each node has two links with each peer (4 ms) [ok]: Validate cluster links format (1 ms) [ok]: Load cluster announced IPv6 config on server start (194 ms) [ok]: HEXPIREAT active expiry removes entire key when last field expires (1006 ms) [75/146 done]: unit/cluster/announce-client-ip (28 seconds) Testing unit/cluster/sharded-pubsub [ok]: Multiple MEETs from Node 1 to Node 0 should work (2593 ms) [76/146 done]: unit/cluster/cluster-multiple-meets (3 seconds) Testing unit/cluster/cluster-response-tls [77/146 done]: unit/cluster/cluster-response-tls (0 seconds) Testing unit/cluster/shutdown [ok]: HEXPIREAT active expiry with non-existing fields (1502 ms) [ok]: Restart source primary during migration (with save) causes failure (3316 ms) [ok]: HEXPIREAT active expiry with mixed existing and non-existing fields (503 ms) [ok]: Handshake eventually succeeds after node handshake timeout on one side with inconsistent view of the cluster (8056 ms) [78/146 done]: unit/cluster/cluster-reliable-meet (25 seconds) Testing unit/cluster/base [ok]: Human nodenames are visible in log messages (3523 ms) [ok]: CLUSTER SLOT-STATS cpu-usec reset upon slot migration. (3835 ms) [ok]: Cluster nodes are reachable (0 ms) [79/146 done]: unit/cluster/human-announced-nodename (6 seconds) Testing unit/cluster/misc [ok]: Restart target replica during migration (without save) causes success (1604 ms) [ok]: The replica will have a new shard_id after cluster reset soft (109 ms) [ok]: Primary lost a slot during the shutdown waiting (4240 ms) [80/146 done]: unit/cluster/shardid-propagation (12 seconds) Testing unit/cluster/replica-detach [ok]: Slot migration states are replicated (6 ms) [ok]: Restart target replica during migration (with save) causes success (623 ms) [ok]: HEXPIREAT active expiry with already expired fields (2010 ms) [ok]: Migrated replica reports zero repl offset and rank, and fails to win election - sigstop (7669 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for non-slot specific commands. (1931 ms) [ok]: HPEXPIREAT active expiry on single field (1105 ms) [ok]: Cluster Join and auto-discovery test (2484 ms) [ok]: Before slots allocation, all nodes report cluster failure (29 ms) [ok]: Different nodes have different IDs (3 ms) [ok]: Restart source replica during migration (without save) causes success (1626 ms) [ok]: It is possible to perform slot allocation (300 ms) [ok]: After the join, every node gets a different config epoch (7 ms) [ok]: Restart source replica during migration (with save) causes success (613 ms) [ok]: HPEXPIREAT active expiry with multiple fields (1106 ms) [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - shutdown - shutdown-timeout: 10 (10094 ms) [ok]: Unable to find a replica to perform an auto failover - shutdown (13 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for slot specific commands. (1952 ms) [ok]: Test shutdown safe is working (3298 ms) [81/146 done]: unit/cluster/shutdown (5 seconds) Testing unit/cluster/info [ok]: Migration target is auto-updated after failover in target shard (3231 ms) [ok]: HPEXPIREAT active expiry removes entire key when last field expires (1104 ms) [ok]: Disconnect link when send buffer limit reached (8844 ms) [ok]: Link memory increases with publishes (832 ms) [ok]: HPEXPIREAT active expiry with non-existing fields (1501 ms) [ok]: Cluster should start ok (9 ms) [ok]: errorstats: rejected call due to MOVED Redirection (1 ms) [ok]: Link memory resets after publish messages flush (517 ms) [82/146 done]: unit/cluster/links (24 seconds) Testing unit/cluster/cluster-nodes-slots [ok]: HPEXPIREAT active expiry with mixed existing and non-existing fields (1106 ms) [ok]: Import with default user having no permission (149 ms) [ok]: Migration source is auto-updated after failover in source shard (3236 ms) [ok]: Replica redirects key access in migrating slots (3 ms) [ok]: Replica of migrating node returns ASK redirect after READONLY (2 ms) [ok]: Replica of migrating node returns TRYAGAIN after READONLY (3 ms) [ok]: Replica of importing node returns TRYAGAIN after READONLY and ASKING (2 ms) [ok]: Sharded pubsub publish behavior within multi/exec (0 ms) [ok]: Sharded pubsub within multi/exec with cross slot operation (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with read operation on replica (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on primary (0 ms) [ok]: Sharded pubsub publish behavior within multi/exec with write operation on replica (2 ms) [ok]: SSUBSCRIBE client killed during transaction (0 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for blocking commands, unblocked on keyspace update. (3892 ms) [ok]: Nodes should report cluster_state is ok now (4884 ms) [ok]: Sanity for CLUSTER COUNTKEYSINSLOT (0 ms) [ok]: It is possible to write and read from the cluster (54 ms) [ok]: CLUSTER RESET SOFT test (8 ms) [ok]: Coverage: CLUSTER HELP (0 ms) [ok]: Coverage: ASKING (0 ms) [ok]: CLUSTER SLAVES and CLUSTER REPLICAS with zero replicas (0 ms) [ok]: Verify that single primary marks replica as failed (3098 ms) [83/146 done]: unit/cluster/base (9 seconds) Testing unit/cluster/diskless-load-swapdb [84/146 done]: unit/cluster/sharded-pubsub (11 seconds) Testing unit/cluster/manual-failover [ok]: New replica inherits migrating slot (1047 ms) [ok]: New Master down consecutively (17728 ms) [ok]: HPEXPIREAT active expiry with already expired fields (2110 ms) [ok]: New replica inherits importing slot (889 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for blocking commands, unblocked on timeout. (2521 ms) [ok]: CLIENT PAUSE WRITE blocks hash field active expiry until pause ends (1303 ms) [ok]: Key lazy expires during key migration (14 ms) [ok]: Coverage: Basic cluster commands (3 ms) [85/146 done]: unit/cluster/slave-selection (61 seconds) Testing unit/cluster/pubsub [ok]: Primary lost a slot during the manual failover pausing (193 ms) [ok]: Cluster should start ok (28 ms) [ok]: CLUSTER REPLICATE NO ONE should turn node into empty primary (310 ms) [ok]: fail reason changed (3465 ms) [ok]: CONFIG RESETSTAT resets cluster related stats (88 ms) [86/146 done]: unit/cluster/replica-detach (12 seconds) Testing unit/cluster/cluster-flush-slot [ok]: HEXPIRE active expiry works correctly after RENAME operation (2109 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for transactions. (3928 ms) [ok]: HEXPIRE active expiry works correctly after COPY operation (2010 ms) [ok]: New non-empty replica reports zero repl offset and rank, and fails to win election - shutdown (2130 ms) [ok]: count - node partial failure (1038 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for lua-scripts, without cross-slot keys. (1959 ms) [ok]: count - node complete failure (1012 ms) [ok]: HEXPIRE active expiry works correctly after RESTORE operation (2211 ms) [87/146 done]: unit/cluster/info (13 seconds) Testing unit/cluster/failover2 [ok]: Cluster should start ok (17 ms) [ok]: Continuous slots distribution (4 ms) [ok]: Discontinuous slots distribution (3 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for lua-scripts, with cross-slot keys. (1953 ms) [88/146 done]: unit/cluster/cluster-nodes-slots (11 seconds) Testing unit/cluster/multidb [ok]: Cluster should start ok (9 ms) [ok]: Cluster is writable (39 ms) [ok]: HEXPIRE active expiry works correctly after MOVE operation (2212 ms) [ok]: Failover cancels slot migration in transferred replica (241 ms) [ok]: Cluster is up (45 ms) [ok]: Cluster is writable (43 ms) [ok]: Instance #5 is a slave (1 ms) [ok]: Instance #5 synced with the master (0 ms) WW[ok]: CLUSTER SLOT-STATS cpu-usec for functions, without cross-slot keys. (1974 ms) WWWW[ok]: Multiple slot migration states are replicated (10 ms) WWW[ok]: New replica inherits multiple migrating slots (593 ms) [ok]: Slot finalization succeeds on both primary and replicas (21 ms) [ok]: HPEXPIRE active expiry works correctly after RENAME operation (2212 ms) W[ok]: Send CLUSTER FAILOVER to #5, during load (1787 ms) [ok]: Wait for failover (15 ms) [ok]: Cluster should eventually be up again (43 ms) [ok]: Cluster is writable (43 ms) [ok]: Instance #5 is now a master (0 ms) [ok]: Cross-slot transaction (0 ms) [ok]: CLUSTER SLOT-STATS cpu-usec for functions, with cross-slot keys. (1952 ms) [ok]: Test publishing to master (3 ms) [ok]: Test publishing to slave (2 ms) [ok]: Verify 50000 keys for consistency with logical content (979 ms) [ok]: Instance #0 gets converted into a slave (14 ms) [89/146 done]: unit/cluster/misc (23 seconds) Testing unit/cluster/many-slot-migration [ok]: Primary lost a slot during the client pause command (56 ms) [ok]: SYNC Flush slot command (73 ms) [ok]: Migration with no replicas (252 ms) [ok]: ASYNC Flush slot command (60 ms) [ok]: HPEXPIRE active expiry works correctly after COPY operation (2211 ms) [90/146 done]: unit/cluster/slot-ownership (49 seconds) Testing unit/cluster/replica-redirect [ok]: Failover on shutdown hands over primaryship to a fully sync'd replica - sigterm - shutdown-timeout: 10 (10171 ms) [ok]: Unable to find a replica to perform an auto failover - sigterm (91 ms) [ok]: Test cluster info stats for publish (0 ms) [ok]: Verify that multiple primaries mark replica as failed (6149 ms) [ok]: HPEXPIRE active expiry works correctly after RESTORE operation (2209 ms) [91/146 done]: unit/cluster/pubsub (15 seconds) Testing unit/cluster/announced-endpoints [ok]: Cluster is up (41 ms) [92/146 done]: unit/cluster/auto-failover-on-shutdown (68 seconds) Testing unit/cluster/replica-in-sync [ok]: CLUSTER SLOT-STATS network-bytes-in, multi bulk buffer processing. (1988 ms) [ok]: Read syncslots establish response timeout (3049 ms) [ok]: Migration cannot connect to target (6 ms) [ok]: HPEXPIRE active expiry works correctly after MOVE operation (2114 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, in-line buffer processing. (1981 ms) [ok]: Cluster is up (9 ms) [ok]: Key-based commands can be used on multiple databases (0 ms) [ok]: Cluster is up (31 ms) [ok]: Cluster is writable (51 ms) [ok]: Killing one primary node (5 ms) [ok]: Key-based commands across multiple databases (355 ms) [ok]: HEXPIREAT active expiry works correctly after RENAME operation (1307 ms) [ok]: Validate slot statistics using cluster countkeysinslot and cluster getkeysinslot (499 ms) [ok]: Set many keys (3721 ms) [ok]: Replication: Write to multiple databases and verify replica (782 ms) [ok]: New non-empty replica reports zero repl offset and rank, and fails to win election - sigstop (3157 ms) [ok]: SWAPDB is not supported in cluster mode (503 ms) [ok]: HEXPIREAT active expiry works correctly after COPY operation (2013 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, blocking command. (3907 ms) [ok]: Cross-DB Expiry Handling (2003 ms) [ok]: HEXPIREAT active expiry works correctly after RESTORE operation (2011 ms) [ok]: Keys are accessible (3763 ms) [ok]: Cluster is up (9 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, multi-exec transaction. (1997 ms) [ok]: blocked clients behavior during failover (65 ms) [ok]: Slot is auto-claimed by target after source relinquishes ownership (1005 ms) [93/146 done]: unit/cluster/replica-redirect (11 seconds) Testing unit/cluster/cross-version-cluster [ignore]: Other server path not provided [ignore]: Other server path not provided [94/146 done]: unit/cluster/cross-version-cluster (0 seconds) Testing unit/cluster/pubsubshard [ok]: Flush slot command propagated to replica (78 ms) [ok]: Cluster is up (47 ms) [ok]: Cluster is writable (52 ms) [ok]: Instance #5 is a slave (0 ms) [ok]: Instance #5 synced with the master (1 ms) [ok]: Make instance #0 unreachable without killing it (0 ms) [ok]: Send CLUSTER FAILOVER to instance #5 (0 ms) [ok]: Wait for failover (6306 ms) [ok]: Killing the new primary node (7 ms) [ok]: Cluster should eventually be up again (82 ms) [ok]: Init migration of many slots (1680 ms) [ok]: HEXPIREAT active expiry works correctly after MOVE operation (2012 ms) [ok]: Persistence across restart with multiple databases (2890 ms) [ok]: Copy key to other database (3 ms) [ok]: CLUSTER RESET should fail if databases contain keys (1 ms) [ok]: Move key to other database (0 ms) [ok]: Flushslot with multiple databases (4 ms) [95/146 done]: unit/cluster/cluster-flush-slot (23 seconds) Testing integration/psync2 [ok]: Instance #5 is still a slave after some time (no failover) (1002 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, non slot specific command. (1928 ms) [ok]: Cluster is up (10 ms) [ok]: PSYNC2: --- CYCLE 1 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (4 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (1 ms) [ok]: Cluster is writable (65 ms) [ok]: Fill up primary with data (2 ms) [ok]: Add new node as replica (2 ms) [ok]: Check digest and replica state (1 ms) [96/146 done]: unit/cluster/multidb (19 seconds) Testing integration/aof-race [ok]: Test change cluster-announce-port and cluster-announce-tls-port at runtime (209 ms) [97/146 done]: integration/aof-race (0 seconds) Testing integration/block-repl [ok]: Test change cluster-announce-bus-port at runtime (204 ms) [ok]: Wait for instance #0 to return back alive (999 ms) [ok]: Test change port and tls-port on runtime (212 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (2 ms) [ok]: HPEXPIREAT active expiry works correctly after RENAME operation (2017 ms) [ok]: Cluster is up (90 ms) [ok]: Cluster is writable (89 ms) [ok]: Instance #5 is a slave (0 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, pub/sub. (2002 ms) [ok]: First server should have role slave after SLAVEOF (1002 ms) [98/146 done]: unit/cluster/announced-endpoints (13 seconds) Testing integration/failover [ok]: PSYNC2: Set #2 to replicate from #0 (0 ms) [ok]: failover command fails without connected replica (0 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: setup replication for following tests (808 ms) [ok]: failover command fails with invalid host (0 ms) [ok]: failover command fails with invalid port (0 ms) [ok]: failover command fails with just force and timeout (0 ms) [ok]: failover command fails when sent to a replica (0 ms) [ok]: failover command fails with force without timeout (0 ms) [ok]: HPEXPIREAT active expiry works correctly after COPY operation (2214 ms) [ok]: client do not break when cluster slot (2305 ms) [ok]: client can handle keys with hash tag (37 ms) [ok]: slot migration is valid from primary to another primary (42 ms) [ok]: slot migration is invalid from primary to replica (38 ms) [ok]: PSYNC2: cluster is consistent after failover (2 ms) [ok]: failover command to specific replica works (1039 ms) [ok]: Replica migration persisted through AOF (3391 ms) [ok]: Imported keys are persisted through AOF (265 ms) [ok]: wait for new failover (5912 ms) [ok]: Restarting the previously killed primary nodes (1 ms) [ok]: Make sure there is no failover timeout (1 ms) [ok]: failover command to any replica works (1030 ms) [ok]: HPEXPIREAT active expiry works correctly after RESTORE operation (2014 ms) [ok]: failover to a replica with force works (334 ms) [ok]: Replica in loading state is hidden (5938 ms) [ok]: Check disconnected replica not hidden from slots (103 ms) [ok]: failover with timeout aborts if replica never catches up (559 ms) [ok]: failovers can be aborted (14 ms) [99/146 done]: unit/cluster/replica-in-sync (17 seconds) Testing integration/corrupt-dump-fuzzer [ok]: failover aborts if target rejects sync request (534 ms) [ok]: HPEXPIREAT active expiry works correctly after MOVE operation (2217 ms) [100/146 done]: integration/failover (5 seconds) Testing integration/skip-rdb-checksum [ok]: Skip RDB checksum sync - tls:0, repl_diskless_sync:yes, repl_diskless_load:on-empty-db (324 ms) [101/146 done]: integration/skip-rdb-checksum (1 seconds) Testing integration/psync2-reg [ok]: HEXPIRE active expiry processes multiple hash keys with different field counts (1108 ms) [ok]: Pub/Sub shard basics (2 ms) [ok]: client can't subscribe to multiple shard channels across different slots in same call (0 ms) [ok]: client can subscribe to multiple shard channels across different slots in separate call (1 ms) [ok]: sunsubscribe without specifying any channel would unsubscribe all shard channels subscribed (0 ms) [ok]: Verify Pub/Sub and Pub/Sub shard no overlap (3 ms) [ok]: PUBSUB channels/shardchannels (0 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 76567) (0 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 2 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #4 as master (0 ms) [ok]: PSYNC2: Set #0 to replicate from #4 (0 ms) [ok]: PSYNC2: Set #1 to replicate from #2 (0 ms) [ok]: PSYNC2: Set #2 to replicate from #0 (1 ms) [ok]: PSYNC2: Set #3 to replicate from #4 (0 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: CLUSTER SETSLOT with invalid timeouts (0 ms) [ok]: PSYNC2 #3899 regression: setup (1006 ms) [ok]: HPEXPIRE active expiry processes multiple hash keys with different field counts (1109 ms) [102/146 done]: unit/cluster/pubsubshard (11 seconds) Testing integration/replication-3 [ok]: HEXPIREAT active expiry processes multiple hash keys with different field counts (310 ms) [ok]: Only primary with slots has the right to mark a node as failed (19449 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: First server should have role slave after SLAVEOF (817 ms) [ok]: HPEXPIREAT active expiry processes multiple hash keys with different field counts (1117 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: HEXPIRE handles mixed short and long expiry times across multiple keys (1117 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (4 ms) [ok]: slot must be unbound on the owner when it is deleted (9549 ms) [ok]: HPEXPIRE handles mixed short and long expiry times across multiple keys (1112 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Cluster is up (96 ms) [ok]: MASTER and SLAVE consistency with expire (2952 ms) [ok]: Master can replicate command longer than client-query-buffer-limit on replica (30 ms) [ok]: Cluster is writable (109 ms) [ok]: Instance #5 is a slave (0 ms) [ok]: Instance #5 synced with the master (1 ms) [ok]: Make instance #0 unreachable without killing it (0 ms) [ok]: Send CLUSTER FAILOVER to instance #5 (1 ms) [ok]: Instance #5 is a master after some time (59 ms) [ok]: PSYNC2: generate load while killing replication links (5000 ms) [ok]: PSYNC2: cluster is consistent after load (x = 178131) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: HEXPIREAT handles mixed short and long expiry times across multiple keys (706 ms) [ok]: PSYNC2: --- CYCLE 3 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #1 as master (3 ms) [ok]: PSYNC2: Set #0 to replicate from #3 (0 ms) [103/146 done]: unit/cluster/cluster-slots (106 seconds) Testing integration/rdb [ok]: test old version rdb file (1 ms) [ok]: RDB encoding loading test (12 ms) [ok]: PSYNC2 #3899 regression: kill first replica (2 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: RDB future version loading, strict version check (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: AOF maintains consistency through many migrations (10146 ms) [ok]: RDB future version loading, relaxed version check (6 ms) [ok]: PSYNC2: Set #4 to replicate from #1 (1 ms) [ok]: RDB future version loading with unknown types, relaxed version check (1 ms) [ok]: HPEXPIREAT handles mixed short and long expiry times across multiple keys (1108 ms) [ok]: RDB foreign version loading, relaxed version check (0 ms) [ok]: RDB foreign version loading with unknown types, relaxed version check (0 ms) [ok]: Server started empty with non-existing RDB file (0 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (2 ms) [ok]: Server started empty with empty RDB file (5 ms) [104/146 done]: unit/cluster/cluster-migrateslots (109 seconds) Testing integration/aof-multi-part [ok]: Wait for instance #0 to return back alive (1940 ms) [ok]: Multi Part AOF can't load data when some file missing (111 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: no (9719 ms) [ok]: Multi Part AOF can't load data when the sequence not increase monotonically (108 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (1 ms) [ok]: Test RDB stream encoding (102 ms) [ok]: Test RDB stream encoding - sanitize dump (10 ms) [ok]: Multi Part AOF can't load data when there are blank lines in the manifest file (115 ms) [ok]: CLUSTER SLOT-STATS network-bytes-in, sharded pub/sub. (4068 ms) [ok]: HEXPIRE deletes entire keys when all fields expire while preserving partial keys (1116 ms) [ok]: Multi Part AOF can't load data when there is a duplicate base file (112 ms) [ok]: Server should not start if RDB file can't be open (0 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (type unknown) (110 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Server should not start if RDB is corrupted (2 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (missing key) (113 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too short) (111 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (line too long) (111 ms) [ok]: Test FLUSHALL aborts bgsave (294 ms) [ok]: Multi Part AOF can't load data when the manifest format is wrong (odd parameter) (112 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: bgsave resets the change counter (102 ms) [ok]: Multi Part AOF can't load data when the manifest file is empty (112 ms) [ok]: bgsave cancel aborts save (115 ms) [ok]: bgsave cancel schedulled request (4 ms) [ok]: PSYNC2: Set #3 to replicate from #1 (0 ms) [ok]: Multi Part AOF can start when no aof and no manifest (223 ms) [ok]: HPEXPIRE deletes entire keys when all fields expire while preserving partial keys (1109 ms) [ok]: Multi Part AOF can start when we have en empty AOF dir (226 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Multi Part AOF can load data discontinuously increasing sequence (220 ms) [ok]: Multi Part AOF can load data when manifest add new k-v (253 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: PSYNC2: cluster is consistent after failover (0 ms) [ok]: HEXPIREAT deletes entire keys when all fields expire while preserving partial keys (709 ms) [ok]: Multi Part AOF can load data when some AOFs are empty (226 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (2 ms) [ok]: Multi Part AOF can load data from old version valkey (rdb preamble no) (353 ms) Waiting for process 19674 to exit... [ok]: Sub-replica reports zero repl offset and rank, and fails to win election - shutdown (13174 ms) [ok]: client freed during loading (1594 ms) [ok]: Multi Part AOF can load data from old version valkey (rdb preamble yes) (351 ms) [ok]: Multi Part AOF can continue the upgrade from the interrupted upgrade state (120 ms) [ok]: Multi Part AOF can be loaded correctly when both server dir and aof dir contain old AOF (226 ms) [ok]: HPEXPIREAT deletes entire keys when all fields expire while preserving partial keys (1111 ms) [ok]: Multi Part AOF can't load data when the manifest contains the old AOF file name but the file does not exist in server dir and aof dir (120 ms) [ok]: Test RDB load info (524 ms) [ok]: Multi Part AOF can upgrade when when two servers share the same server dir (server1) (66 ms) [ok]: Multi Part AOF can upgrade when when two servers share the same server dir (server2) (67 ms) [ok]: PSYNC2 #3899 regression: kill first replica (0 ms) [ok]: Multi Part AOF can upgrade when when two servers share the same server dir (538 ms) [ok]: Slave is able to evict keys created in writable slaves (6002 ms) [ok]: Writable replica doesn't return expired keys (102 ms) [ok]: PFCOUNT updates cache on readonly replica (6 ms) [ok]: PFCOUNT doesn't use expired key on readonly replica (106 ms) [ok]: Multi Part AOF can handle appendfilename contains whitespaces (350 ms) [ok]: HEXPIRE active expiry reclaims memory efficiently across multiple large hash keys (1126 ms) [ok]: Multi Part AOF can create BASE (RDB format) when server starts from empty (239 ms) [ok]: Multi Part AOF can create BASE (AOF format) when server starts from empty (230 ms) [105/146 done]: integration/replication-3 (12 seconds) Testing integration/convert-zipmap-hash-on-load [ok]: RDB load zipmap hash: converts to listpack (2 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, for non-slot specific commands. (1984 ms) [ok]: HPEXPIRE active expiry reclaims memory efficiently across multiple large hash keys (1031 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: Test child sending info (1945 ms) [ok]: RDB load zipmap hash: converts to hash table when hash-max-ziplist-value is exceeded (6 ms) [106/146 done]: integration/convert-zipmap-hash-on-load (0 seconds) Testing integration/cross-version-replication [ignore]: Other server path not provided [107/146 done]: integration/cross-version-replication (0 seconds) Testing integration/logging [ok]: script won't load anymore if it's in rdb (0 ms) [ok]: Crash report generated on SIGABRT (105 ms) [ok]: Changing aof-use-rdb-preamble during rewrite process (1394 ms) [ok]: Make sure aof manifest appendonly.aof.manifest not in aof directory (0 ms) [ok]: HEXPIREAT active expiry reclaims memory efficiently across multiple large hash keys (715 ms) [ok]: Crash report generated on DEBUG SEGFAULT (2 ms) [ok]: failed bgsave prevents writes (224 ms) [108/146 done]: integration/rdb (8 seconds) Testing integration/replication [ok]: Stacktraces generated on SIGALRM (104 ms) [ok]: Primaries will not time out then they are elected in the same epoch (5335 ms) [ok]: Slave enters handshake (0 ms) [ok]: Slave enters wait_bgsave (0 ms) [ok]: Config hide-user-data-from-log is off (2 ms) [ok]: AOF enable will create manifest file (606 ms) [ok]: Config hide-user-data-from-log is on (4 ms) [109/146 done]: integration/logging (1 seconds) Testing integration/replication-4 [ok]: PSYNC2: generate load while killing replication links (5004 ms) [ok]: PSYNC2: cluster is consistent after load (x = 272513) (1 ms) [ok]: PSYNC2: total sum of full synchronizations is exactly 4 (1 ms) [ok]: PSYNC2: --- CYCLE 4 --- (0 ms) [ok]: PSYNC2: [NEW LAYOUT] Set #0 as master (0 ms) [ok]: PSYNC2: Set #4 to replicate from #0 (1 ms) [ok]: First server should have role slave after SLAVEOF (5 ms) [ok]: HPEXPIREAT active expiry reclaims memory efficiently across multiple large hash keys (1117 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, for slot specific commands. (2056 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, for slot specific commands, for reply copy avoidance (22 ms) [ok]: HINCRBY recreates field with correct value after active expiry deletion (201 ms) [ok]: HINCRBY preserves existing TTL when incrementing field value (1 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: HINCRBY handles mix of expired and existing fields during increment operations (207 ms) [ok]: HINCRBY maintains TTL values when incrementing fields with existing expiry (7 ms) [ok]: HINCRBYFLOAT recreates field with correct value after active expiry deletion (203 ms) [ok]: HINCRBYFLOAT preserves existing TTL when incrementing field value (0 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: AOF multiple rewrite failures will open multiple INCR AOFs (1253 ms) [ok]: HINCRBYFLOAT handles mix of expired and existing fields during increment operations (203 ms) [ok]: HINCRBYFLOAT maintains TTL values when incrementing fields with existing expiry (3 ms) [ok]: PSYNC2: Set #1 to replicate from #0 (0 ms) [ok]: AOF rewrite doesn't open new aof when AOF turn off (551 ms) [ok]: CLUSTER SETSLOT with an explicit timeout (3031 ms) [ok]: AOF enable/disable auto gc (237 ms) [ok]: AOF can produce consecutive sequence number after reload (194 ms) [ok]: PSYNC2: Set #2 to replicate from #3 (5 ms) [ok]: HDEL removes both expired and non-expired fields deleting key when empty (1113 ms) [ok]: AOF enable during BGSAVE will not write data util AOFRW finish (357 ms) [ok]: HPERSIST returns -2 when attempting to persist already expired field (205 ms) [ok]: HPEXPIRE works correctly on field after HPERSIST removes its TTL (307 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: AOF will trigger limit when AOFRW fails many times (610 ms) [ok]: Fuzzer corrupt restore payloads - sanitize_dump: yes (10080 ms) [110/147 done]: integration/corrupt-dump-fuzzer (20 seconds) Testing integration/aof [ok]: PSYNC2: Set #3 to replicate from #4 (1 ms) [ok]: Unfinished MULTI: Server should start if load-truncated is yes (4 ms) [ok]: Short read: Server should start if load-truncated is yes (1 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 5 (2 ms) [ok]: Append a new command after loading an incomplete AOF (1 ms) [ok]: PSYNC2 #3899 regression: kill first replica (1 ms) [ok]: Short read + command: Server should start (0 ms) [ok]: Truncated AOF loaded: we expect foo to be equal to 6 now (0 ms) [ok]: Bad format: Server should have logged an error (2 ms) [ok]: Unfinished MULTI: Server should have logged an error (0 ms) [ok]: Test replication with blocking lists and sorted sets operations (25005 ms) [111/147 done]: integration/block-repl (27 seconds) Testing integration/shutdown [ok]: Short read: Server should have logged an error (0 ms) [ok]: Short read: Utility should confirm the AOF is not valid (2 ms) [ok]: Short read: Utility should show the abnormal line num in AOF (9 ms) [ok]: Short read: Utility should be able to fix the AOF (2 ms) [ok]: PSYNC2: cluster is consistent after failover (1 ms) [ok]: Fixed AOF: Server should have been started (4 ms) [ok]: Fixed AOF: Keyspace should contain values that were parseable (3 ms) [ok]: AOF+SPOP: Server should have been started (4 ms) [ok]: AOF+SPOP: Set should have 1 member (1 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, blocking commands. (4112 ms) [ok]: PSYNC2 #3899 regression: kill chained replica (1 ms) [ok]: Client blocked on XREADGROUP while stream's slot is migrated (7 ms) [ok]: AOF+SPOP: Server should have been started (0 ms) [ok]: AOF+SPOP: Set should have 1 member (0 ms) [ok]: Primaries do not add failure-report after replica is already marked FAIL (6249 ms) [ok]: AOF+EXPIRE: Server should have been started (0 ms) [ok]: AOF+EXPIRE: List should be empty (1 ms) [ok]: Server should not try to convert DEL into EXPIREAT for EXPIRE -1 (1 ms) [112/147 done]: unit/cluster/failure-marking (70 seconds) Testing integration/valkey-check-rdb [ok]: Check old valid RDB (5 ms) [ok]: Check foreign RDB without unknown data (2 ms) [ok]: Check foreign RDB with unknown data (4 ms) [ok]: Check future RDB without unknown data (5 ms) [ok]: Check future RDB with unknown data (3 ms) [ok]: test valkey-check-rdb stats with empty RDB (11 ms) [ok]: test valkey-check-rdb stats function (20 ms) [ok]: Test replication with parallel clients writing in different DBs (5181 ms) [ok]: Hash field TTL values and active expiry state preserved during cluster slot migration (369 ms) [ok]: test valkey-check-rdb stats key space (95 ms) [113/147 done]: integration/valkey-check-rdb (0 seconds) Testing integration/corrupt-dump [ok]: PSYNC2 #3899 regression: kill chained replica (0 ms) [ok]: AOF will open a temporary INCR AOF to accumulate data until the first AOFRW success when AOF is dynamically enabled (2600 ms) [ok]: corrupt payload: #7445 - with sanitize (211 ms) [114/147 done]: integration/aof-multi-part (13 seconds) Testing integration/convert-ziplist-hash-on-load [ok]: First server should have role slave after SLAVEOF (101 ms) [ok]: With min-slaves-to-write (1,3): master should be writable (1 ms) [ok]: With min-slaves-to-write (2,3): master should not be writable (0 ms) [ok]: With min-slaves-to-write function without no-write flag (0 ms) [ok]: With not enough good slaves, read in Lua script is still accepted (1 ms) [ok]: corrupt payload: hash with valid zip list header, invalid entry len (215 ms) [ok]: RDB load ziplist hash: converts to listpack when RDB loading (1 ms) [ok]: RDB load ziplist hash: converts to hash table when hash-max-ziplist-entries is exceeded (1 ms) [ok]: corrupt payload: invalid zlbytes header (227 ms) [115/147 done]: integration/convert-ziplist-hash-on-load (1 seconds) Testing integration/convert-ziplist-zset-on-load [ok]: RDB load ziplist zset: converts to listpack when RDB loading (0 ms) [ok]: corrupt payload: valid zipped hash header, dup records (213 ms) [ok]: Fix cluster (30510 ms) [ok]: RDB load ziplist zset: converts to skiplist when zset-max-ziplist-entries is exceeded (1 ms) [ok]: corrupt payload: quicklist big ziplist prev len (212 ms) [116/147 done]: integration/convert-ziplist-zset-on-load (0 seconds) Testing integration/psync2-master-restart [ok]: PSYNC2 #3899 regression: verify consistency (18 ms) [ok]: corrupt payload: quicklist small ziplist prev len (211 ms) [ok]: Shutting down master waits for replica to catch up (sigterm) (2914 ms) [ok]: corrupt payload: quicklist ziplist wrong count (213 ms) [ok]: corrupt payload: #3080 - quicklist (215 ms) [ok]: corrupt payload: quicklist with empty ziplist (213 ms) [ok]: corrupt payload: quicklist encoded_len is 0 (212 ms) [117/147 done]: integration/psync2-reg (22 seconds) Testing integration/valkey-benchmark [ok]: benchmark: set,get (5 ms) [ok]: benchmark: connecting using URI set,get (2 ms) [ok]: benchmark: connecting using URI with authentication set,get (4 ms) [ok]: corrupt payload: quicklist listpack entry start with EOF (213 ms) [ok]: benchmark: full test suite (60 ms) [ok]: corrupt payload: #3080 - ziplist (212 ms) [ok]: corrupt payload: load corrupted rdb with no CRC - #3505 (106 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (222 ms) [ok]: benchmark: multi-thread set,get (512 ms) [ok]: benchmark: pipelined full set,get (51 ms) [ok]: benchmark: arbitrary command (5 ms) [ok]: corrupt payload: load corrupted rdb with empty keys (113 ms) [ok]: benchmark: arbitrary command sequence (47 ms) value:VXKeHogKgJ=[5V9_X^b?48OKF2jGA of the slave lag (3146 ms) [ok]: min-slaves-to-write is ignored by slaves (3 ms) [ok]: expired_fields metric increments only on primary not replica during field expiry (1024 ms) [ok]: All replicas share one global replication buffer dualchannel yes (74 ms) [ok]: Replication buffer will become smaller when no replica uses dualchannel yes (2 ms) [ok]: corrupt payload: fuzzer findings - set with duplicate elements causes sdiff to hang (232 ms) [125/147 done]: integration/corrupt-dump (14 seconds) Testing integration/dismiss-mem [ok]: Replication of SPOP command -- alsoPropagate() API (785 ms) [ok]: Online toggle dual-channel-replication-enabled on primary, starting with 'yes' (1075 ms) [ok]: expired_fields metric correctly tracks sequential field expirations in replication (439 ms) [ok]: Dumping an RDB - functions only: no (2133 ms) [ok]: HINCRBY is executed on repilca's expired fields (120 ms) [ok]: HINCRBYFLOAT is executed on repilca's expired fields (116 ms) [ok]: HINCRBYFLOAT maintains TTL on repilca's fields (17 ms) [ok]: HSETNX set the value for expired replica field (115 ms) [ok]: HMSET reports hexpired when overwrites expired fields (116 ms) [ok]: PSYNC2 pingoff: setup (1008 ms) [ok]: PSYNC2 pingoff: write and wait replication (1 ms) [ok]: HSETEX KEEPTTL replica should preserve ttl when field is not expired on primary (125 ms) [ok]: Dumping an RDB - functions only: yes (542 ms) [ok]: HSETEX KEEPTTL replica should NOT preserve ttl when field is expired on primary (104 ms) [ok]: Scan mode (86 ms) [ok]: Overwriting hash with volatile fields updates keys_with_volatile_items tracking (3 ms) [ok]: RESTORE REPLACE clears keys_with_volatile_items tracking (5 ms) [ok]: First server should have role slave after SLAVEOF (914 ms) [ok]: Data divergence can happen under default conditions (6 ms) [ok]: Data divergence is allowed on writable replicas (3 ms) [ok]: Zero is a valid ttl in HFE (103 ms) [ok]: dismiss all data types memory (1331 ms) [126/147 done]: unit/hashexpire (167 seconds) [127/147 done]: integration/replication-4 (22 seconds) [ok]: dismiss client output buffer (1395 ms) [ok]: dismiss client query buffer (204 ms) [ok]: Connecting as a replica (2124 ms) [ok]: All replicas share one global replication buffer dualchannel no (63 ms) [ok]: Replication buffer will become smaller when no replica uses dualchannel no (4 ms) [ok]: MASTER and SLAVE dataset should be identical after complex ops (3846 ms) [128/147 done]: integration/replication-2 (8 seconds) [ok]: Piping raw protocol (1050 ms) [ok]: Options -X with illegal argument (5 ms) [ok]: DUMP RESTORE with -x option (14 ms) [ok]: DUMP RESTORE with -X option (12 ms) [ok]: valkey-cli pubsub mode with single standard channel subscription (303 ms) [ok]: valkey-cli pubsub mode with multiple standard channel subscriptions (302 ms) [ok]: valkey-cli pubsub mode with single shard channel subscription (307 ms) [ok]: dismiss replication backlog (2188 ms) [129/147 done]: integration/dismiss-mem (6 seconds) [ok]: valkey-cli pubsub mode with multiple shard channel subscriptions (308 ms) [ok]: valkey-cli pubsub mode with single pattern channel subscription (294 ms) [ok]: PSYNC2 pingoff: pause replica and promote it (5001 ms) [ok]: valkey-cli pubsub mode with multiple pattern channel subscriptions (252 ms) [ok]: Test replication partial resync: ok psync (diskless: no, disabled, dual-channel: no, reconnect: 1) (6247 ms) [ok]: valkey-cli pubsub mode when subscribing to the same channel (304 ms) [ok]: Manual failover vote is not limited by two times the node timeout - mixed failover (4375 ms) [ok]: Make the old master a replica of the new one and check conditions (1004 ms) [ok]: Replication backlog size can outgrow the backlog limit config dualchannel yes (1435 ms) [ok]: valkey-cli pubsub mode with multiple subscription types (671 ms) [ok]: valkey-cli make sure selected db survives connection drops (317 ms) [ok]: Valid Connection Scheme: redis:// (3 ms) [ok]: Valid Connection Scheme: valkey:// (1 ms) [ok]: Replica can update the config epoch when trigger the failover - automatic (15994 ms) [ok]: Slave should be able to synchronize with the master (958 ms) [ok]: Detect write load to master (0 ms) [ok]: valkey-cli command table hint will not leak memory when COMMAND fails due to auth (307 ms) [ok]: MOVE should not be allowed while migrating slots with multi databases (5 ms) [130/147 done]: integration/valkey-cli (12 seconds) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization dualchannel yes (2057 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica dualchannel yes (826 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, sharded pub/sub, single channel. (3906 ms) [ok]: valkey-cli make source node ignores NOREPLICAS error when doing the last CLUSTER SETSLOT - gossip (10042 ms) [ok]: Online toggle dual-channel-replication-enabled on replica, starting with 'yes' (12151 ms) [ok]: Replication backlog size can outgrow the backlog limit config dualchannel no (1473 ms) [ok]: test various edge cases of repl topology changes with missing pings at the end (5528 ms) [ok]: Replica could use replication buffer (beyond backlog config) for partial resynchronization dualchannel no (1989 ms) [ok]: Replication backlog memory will become smaller if disconnecting with replica dualchannel no (539 ms) [ok]: Test replication partial resync: no backlog (diskless: no, disabled, dual-channel: no, reconnect: 1) (7843 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out, sharded pub/sub, cross-slot channels. (3928 ms) [ok]: Slave should be able to synchronize with the master (947 ms) [ok]: Detect write load to master (0 ms) [ok]: Chained replicas disconnect when replica re-connect with the same master (4923 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=disabled dual-channel-replication-enabled=no (20847 ms) [ok]: Cross-DB COPY command should not be allow during slot migration (5 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size. dualchannel yes (4141 ms) [ok]: CLUSTER SLOT-STATS contains default value upon valkey-server startup (1980 ms) [131/147 done]: integration/psync2-pingoff (20 seconds) [132/147 done]: unit/cluster/slot-migration (110 seconds) [ok]: CLUSTER SLOT-STATS contains correct metrics upon key introduction (2016 ms) [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (2 ms) [ok]: Automatic failover vote is not limited by two times the node timeout - mixed failover (3403 ms) [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending. dualchannel yes (3147 ms) [ok]: Main db not affected when fail to diskless load (83890 ms) [ok]: CLUSTER SLOT-STATS contains correct metrics upon key mutation (2059 ms) [ok]: Toggle dual-channel-replication-enabled: no start (11922 ms) Waiting for process 10708 to exit... [ok]: Online toggle dual-channel-replication-enabled on primary, starting with 'no' (1140 ms) Waiting for process 10708 to exit... [ok]: CLUSTER SLOT-STATS contains correct metrics upon key deletion (2038 ms) [ok]: Test replication partial resync: ok after delay (diskless: no, disabled, dual-channel: no, reconnect: 1) (9428 ms) Waiting for process 10708 to exit... [ok]: Replica can update the config epoch when trigger the failover - manual (8546 ms) [ok]: Partial resynchronization is successful even client-output-buffer-limit is less than repl-backlog-size. dualchannel no (4151 ms) [133/147 done]: unit/cluster/failover2 (89 seconds) [ok]: Slave should be able to synchronize with the master (948 ms) [ok]: Detect write load to master (0 ms) [ok]: Online toggle dual-channel-replication-enabled on replica, starting with 'no' (2160 ms) Waiting for process 10708 to exit... [ok]: The update of replBufBlock's repl_offset is ok - Regression test for #11666 (0 ms) Waiting for process 10708 to exit... [ok]: valkey-cli make source node ignores NOREPLICAS error when doing the last CLUSTER SETSLOT - setslot (5038 ms) [ok]: CLUSTER SLOT-STATS slot visibility based on slot ownership changes (3918 ms) Waiting for process 33179 to exit... Waiting for process 10708 to exit... [ok]: Replica client-output-buffer size is limited to backlog_limit/16 when no replication data is pending. dualchannel no (3244 ms) [134/147 done]: integration/replication-buffer (32 seconds) Waiting for process 10708 to exit... [ok]: CLUSTER SLOT-STATS SLOTSRANGE all slots present (1 ms) [ok]: CLUSTER SLOT-STATS SLOTSRANGE some slots missing (3 ms) Waiting for process 10708 to exit... [ok]: Empty primary will check and delete the dirty slots (157 ms) [135/147 done]: unit/cluster/replica-migration (158 seconds) Waiting for process 10708 to exit... [136/147 done]: unit/cluster/diskless-load-swapdb (104 seconds) [ok]: dual-channel-replication with multiple replicas (6547 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=no, replica diskless=swapdb dual-channel-replication-enabled=no (16612 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, disabled, dual-channel: no, reconnect: 1) (9503 ms) [ok]: Slave should be able to synchronize with the master (107 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: no, swapdb, dual-channel: no, reconnect: 0) (11 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Manual failover will reset the on-going election (5155 ms) [ok]: Detect write load to master (1002 ms) [ok]: Test diverse replica sync: dual-channel on/off (6466 ms) [ok]: CLUSTER SLOT-STATS ORDERBY DESC correct ordering (7919 ms) [ok]: Test replica's buffer limit reached (1491 ms) [ok]: Test replication partial resync: ok psync (diskless: no, swapdb, dual-channel: no, reconnect: 1) (6299 ms) [ok]: Slave should be able to synchronize with the master (104 ms) [ok]: Detect write load to master (0 ms) [ok]: Broadcast PONG to the cluster when the node role changes (161 ms) [ok]: CLUSTER SLOT-STATS ORDERBY ASC correct ordering (7884 ms) [ok]: CLUSTER SLOT-STATS ORDERBY LIMIT correct response pagination, where limit is less than number of assigned slots (7 ms) [ok]: CLUSTER SLOT-STATS ORDERBY LIMIT correct response pagination, where limit is greater than number of assigned slots (2 ms) [ok]: CLUSTER SLOT-STATS ORDERBY arg sanity check. (1 ms) [ok]: dual-channel-replication fails when primary diskless disabled (1004 ms) [ok]: Test dual-channel-replication sync- psync established after rdb load (784 ms) [ok]: Test replication partial resync: no backlog (diskless: no, swapdb, dual-channel: no, reconnect: 1) (7849 ms) [ok]: Slave should be able to synchronize with the master (101 ms) [ok]: Detect write load to master (0 ms) [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=disabled dual-channel-replication-enabled=yes (21410 ms) [ok]: dual-channel-replication: Primary COB growth with inactive replica (8044 ms) [ok]: The role change and the slot ownership change should be an atomic operation (66 ms) Waiting for process 35753 to exit... Waiting for process 35753 to exit... [ok]: Test replication partial resync: ok after delay (diskless: no, swapdb, dual-channel: no, reconnect: 1) (9390 ms) [ok]: Slave should be able to synchronize with the master (105 ms) [ok]: Detect write load to master (1 ms) [ok]: Test dual-channel: primary tracking replica backlog refcount - start with empty backlog (952 ms) [ok]: CLUSTER SLOT-STATS metrics replication for new keys (4120 ms) [ok]: CLUSTER SLOT-STATS metrics replication for existing keys (4193 ms) [ok]: Node will fix the replicaof when it finds that it is a sub-replica (569 ms) [ok]: Test dual-channel: primary tracking replica backlog refcount - start with backlog (8215 ms) [ok]: CLUSTER SLOT-STATS metrics replication for deleting keys (4025 ms) [ok]: Test replication partial resync: backlog expired (diskless: no, swapdb, dual-channel: no, reconnect: 1) (9343 ms) [137/147 done]: unit/cluster/manual-failover (144 seconds) [ok]: Slave should be able to synchronize with the master (909 ms) [ok]: Detect write load to master (0 ms) [ok]: Psync established after rdb load - within grace period (1018 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, dual-channel: yes, reconnect: 0) (49 ms) [ok]: Slave should be able to synchronize with the master (929 ms) [ok]: Detect write load to master (0 ms) [ok]: Psync established after RDB load - beyond grace period (2282 ms) Waiting for process 37083 to exit... [ok]: Connect multiple replicas at the same time (issue #141), master diskless=yes, replica diskless=swapdb dual-channel-replication-enabled=yes (19287 ms) [ok]: CLUSTER SLOT-STATS network-bytes-out with copy avoidance and commandlog disabled (4009 ms) [138/147 done]: unit/cluster/slot-stats (166 seconds) Waiting for process 37083 to exit... [ok]: Test dual-channel-replication primary gets cob overrun before established psync (1026 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (6315 ms) [ok]: Slave should be able to synchronize with the master (913 ms) [ok]: Detect write load to master (0 ms) Waiting for process 39090 to exit... Waiting for process 39090 to exit... Waiting for process 39090 to exit... Waiting for process 39090 to exit... Waiting for process 39090 to exit... Waiting for process 39090 to exit... Waiting for process 39090 to exit... Waiting for process 39090 to exit... [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (7960 ms) Waiting for process 39090 to exit... [ok]: Slave should be able to synchronize with the master (924 ms) [ok]: Detect write load to master (0 ms) [ok]: Test dual-channel-replication primary gets cob overrun during replica rdb load (1022 ms) [ok]: Master stream is correctly processed while the replica has a script in -BUSY state (18780 ms) [ok]: Diskless load swapdb (different replid): new database is exposed after swapping dual-channel=yes (1 ms) [ok]: Diskless load swapdb (different replid): replica enter loading dual-channel-replication-enabled=no (426 ms) [ok]: Diskless load swapdb (different replid): old database is exposed after replication fails dual-channel=no (0 ms) [ok]: Diskless load swapdb (async_loading): new database is exposed after swapping (0 ms) [ok]: Diskless load swapdb (async_loading): replica enter async_loading (332 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (9432 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed while async replication is in progress (889 ms) [ok]: Slave should be able to synchronize with the master (915 ms) [ok]: Detect write load to master (0 ms) [ok]: Busy script during async loading (884 ms) [ok]: Blocked commands and configs during async-loading (432 ms) [ok]: Diskless load swapdb (async_loading): old database is exposed after async replication fails (0 ms) Waiting for process 40712 to exit... [ok]: Sync should continue if not all slaves dropped (11100 ms) Waiting for process 40712 to exit... Waiting for process 40712 to exit... Waiting for process 40712 to exit... Waiting for process 40712 to exit... [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, dual-channel: yes, reconnect: 1) (9563 ms) [ok]: Primary abort sync if all slaves dropped dual-channel-replication (7021 ms) [ok]: Slave should be able to synchronize with the master (916 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, disabled, dual-channel: no, reconnect: 0) (48 ms) [ok]: Slave should be able to synchronize with the master (922 ms) [ok]: Detect write load to master (0 ms) [ok]: Test dual-channel-replication replica main channel disconnected (1212 ms) [ok]: Test dual channel replication slave of no one after main conn kill (0 ms) [ok]: Test dual-channel-replication replica rdb connection disconnected (1207 ms) [ok]: Test dual channel replication slave of no one after rdb conn kill (2 ms) [ok]: Test dual-channel-replication primary reject set-rdb-client after client killed (1191 ms) [ok]: Test replica unable to join dual channel replication sync after started (1104 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, disabled, dual-channel: no, reconnect: 1) (6317 ms) [ok]: Replica recover rdb-connection killed (2106 ms) [ok]: Slave should be able to synchronize with the master (917 ms) [ok]: Detect write load to master (0 ms) [ok]: Replica recover main-connection killed (1111 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, disabled, dual-channel: no, reconnect: 1) (7947 ms) [ok]: Replica notice main-connection killed during rdb load callback (7391 ms) [ok]: Slave should be able to synchronize with the master (922 ms) [ok]: Detect write load to master (0 ms) [ok]: Chained replicas can disconnect protected RDB channel client when using dual channel replication (2975 ms) [139/147 done]: integration/dual-channel-replication (147 seconds) Waiting for process 41437 to exit... [ok]: diskless loading short read (27402 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, disabled, dual-channel: no, reconnect: 1) (9511 ms) [ok]: Slave should be able to synchronize with the master (917 ms) [ok]: Detect write load to master (1 ms) [ok]: diskless no replicas drop during rdb pipe (7208 ms) [ok]: diskless slow replicas drop during rdb pipe (4778 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, disabled, dual-channel: no, reconnect: 1) (10525 ms) [ok]: Slave should be able to synchronize with the master (813 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, dual-channel: yes, reconnect: 0) (52 ms) [ok]: diskless fast replicas drop during rdb pipe (5670 ms) [ok]: Slave should be able to synchronize with the master (808 ms) [ok]: Detect write load to master (1 ms) [ok]: diskless all replicas drop during rdb pipe (1016 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (6358 ms) [ok]: diskless timeout replicas drop during rdb pipe (7872 ms) [ok]: Slave should be able to synchronize with the master (1811 ms) [ok]: Detect write load to master (0 ms) [ok]: diskless replication child being killed is collected (1455 ms) [ok]: replication child dies when parent is killed - diskless: yes dual-channel-replication-enabled: yes (1136 ms) [ok]: replication child dies when parent is killed - diskless: no dual-channel-replication-enabled: no (1438 ms) [ok]: diskless replication read pipe cleanup (629 ms) [ok]: replicaof right after disconnection (2425 ms) [ok]: Kill rdb child process if its dumping RDB is not useful (914 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (8035 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync with dual-channel-replication yes (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync with dual-channel-replication yes (4 ms) [ok]: Don't disconnect with replicas before loading transferred RDB when full sync with dual-channel-replication no (2 ms) [ok]: Discard cache master before loading transferred RDB when full sync with dual-channel-replication no (105 ms) [ok]: replica can handle EINTR if use diskless load (838 ms) [ok]: replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList) (108 ms) [ok]: replica do not write the reply to the replication link - SYNC (addReplyDeferredLen) (110 ms) [ok]: replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList) (103 ms) [ok]: replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen) (103 ms) [ok]: PSYNC with wrong offset should throw error (1 ms) [ok]: Test replication with lazy expire (916 ms) [ok]: replica actually flushes db if use diskless load with flush-before-load dual-channel-replication-enabled=yes (561 ms) [ok]: replica actually flushes db if use diskless load with flush-before-load dual-channel-replication-enabled=no (561 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (9554 ms) [ok]: Replica keep the old data if RDB file save fails in disk-based replication (1789 ms) [140/147 done]: integration/replication (205 seconds) [ok]: Slave should be able to synchronize with the master (1813 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, dual-channel: yes, reconnect: 1) (10713 ms) [ok]: Slave should be able to synchronize with the master (1811 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: no reconnection, just sync (diskless: yes, swapdb, dual-channel: no, reconnect: 0) (109 ms) [ok]: Slave should be able to synchronize with the master (806 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok psync (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (6359 ms) [ok]: Slave should be able to synchronize with the master (805 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: no backlog (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (7969 ms) [ok]: Slave should be able to synchronize with the master (1809 ms) [ok]: Detect write load to master (0 ms) [ok]: Test replication partial resync: ok after delay (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (9588 ms) [ok]: Slave should be able to synchronize with the master (809 ms) [ok]: Detect write load to master (1 ms) [ok]: Test replication partial resync: backlog expired (diskless: yes, swapdb, dual-channel: no, reconnect: 1) (9630 ms) [141/147 done]: integration/replication-psync (241 seconds) Testing solo test Jemalloc not available. Defrag tests skipped. [142/147 done]: defrag (0 seconds) Testing solo test [ignore]: large memory flag not provided [143/147 done]: bitops-large-memory (0 seconds) Testing solo test [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [ignore]: large memory flag not provided [144/147 done]: violations (0 seconds) Testing solo test [ignore]: large memory flag not provided [145/147 done]: set-large-memory (0 seconds) Testing solo test [ignore]: large memory flag not provided [146/147 done]: list-large-memory (0 seconds) Testing solo test [ok]: Multiple primary nodes are down, rank them based on the failed primary (18462 ms) [147/147 done]: cluster (39 seconds) The End Execution time of different units: 1 seconds - unit/replybufsize 4 seconds - unit/acl 4 seconds - unit/memefficiency 4 seconds - unit/keyspace 0 seconds - unit/quit 1 seconds - unit/oom-score-adj 7 seconds - unit/querybuf 0 seconds - unit/acl-v2 2 seconds - unit/bitops 9 seconds - unit/sort 11 seconds - unit/functions 11 seconds - unit/introspection-2 3 seconds - unit/networking 1 seconds - unit/shutdown 1 seconds - unit/slowlog 1 seconds - unit/commandlog 0 seconds - unit/info-command 14 seconds - unit/other 2 seconds - unit/tracking 1 seconds - unit/lazyfree 1 seconds - unit/pubsub 3 seconds - unit/info 17 seconds - unit/latency-monitor 3 seconds - unit/bitfield 18 seconds - unit/introspection 0 seconds - unit/tls 0 seconds - unit/violations 6 seconds - unit/auth 2 seconds - unit/pubsubshard 1 seconds - unit/limits 1 seconds - unit/protocol 21 seconds - unit/client-eviction 13 seconds - unit/obuf-limits 24 seconds - unit/dump 4 seconds - unit/type/set 5 seconds - unit/type/hash 0 seconds - unit/type/incr 10 seconds - unit/multi 27 seconds - unit/geo 27 seconds - unit/aofrw 7 seconds - unit/type/stream-cgroups 15 seconds - unit/scan 7 seconds - unit/type/string 14 seconds - unit/pause 18 seconds - unit/expire 2 seconds - unit/cluster/packet 9 seconds - unit/type/list-2 3 seconds - unit/cluster/slot-migration-response 12 seconds - unit/type/stream 18 seconds - unit/type/zset 12 seconds - unit/cluster/announce-client-ports 37 seconds - unit/wait 37 seconds - unit/maxmemory 37 seconds - unit/scripting 17 seconds - unit/type/list 14 seconds - unit/cluster/hostnames 13 seconds - unit/cluster/transactions-on-replica 19 seconds - unit/cluster/manual-takeover 57 seconds - unit/hyperloglog 1 seconds - unit/cluster/divergent-cluster-shardid-conf 19 seconds - unit/cluster/consistency-check 3 seconds - unit/cluster/multi-slot-operations 20 seconds - unit/cluster/update-msg 33 seconds - unit/cluster/faildet 12 seconds - unit/cluster/noaddr 33 seconds - unit/cluster/cli 14 seconds - unit/cluster/no-failover-option 14 seconds - unit/cluster/cluster-shards 50 seconds - unit/type/list-3 2 seconds - unit/cluster/scripting 13 seconds - unit/cluster/pubsubshard-slot-migration 32 seconds - unit/cluster/failover 2 seconds - unit/cluster/half-migrated-slot 43 seconds - unit/cluster/slave-stop-cond 28 seconds - unit/cluster/announce-client-ip 3 seconds - unit/cluster/cluster-multiple-meets 0 seconds - unit/cluster/cluster-response-tls 25 seconds - unit/cluster/cluster-reliable-meet 6 seconds - unit/cluster/human-announced-nodename 12 seconds - unit/cluster/shardid-propagation 5 seconds - unit/cluster/shutdown 24 seconds - unit/cluster/links 9 seconds - unit/cluster/base 11 seconds - unit/cluster/sharded-pubsub 61 seconds - unit/cluster/slave-selection 12 seconds - unit/cluster/replica-detach 13 seconds - unit/cluster/info 11 seconds - unit/cluster/cluster-nodes-slots 23 seconds - unit/cluster/misc 49 seconds - unit/cluster/slot-ownership 15 seconds - unit/cluster/pubsub 68 seconds - unit/cluster/auto-failover-on-shutdown 11 seconds - unit/cluster/replica-redirect 0 seconds - unit/cluster/cross-version-cluster 23 seconds - unit/cluster/cluster-flush-slot 19 seconds - unit/cluster/multidb 0 seconds - integration/aof-race 13 seconds - unit/cluster/announced-endpoints 17 seconds - unit/cluster/replica-in-sync 5 seconds - integration/failover 1 seconds - integration/skip-rdb-checksum 11 seconds - unit/cluster/pubsubshard 106 seconds - unit/cluster/cluster-slots 109 seconds - unit/cluster/cluster-migrateslots 12 seconds - integration/replication-3 0 seconds - integration/convert-zipmap-hash-on-load 0 seconds - integration/cross-version-replication 8 seconds - integration/rdb 1 seconds - integration/logging 20 seconds - integration/corrupt-dump-fuzzer 27 seconds - integration/block-repl 70 seconds - unit/cluster/failure-marking 0 seconds - integration/valkey-check-rdb 13 seconds - integration/aof-multi-part 1 seconds - integration/convert-ziplist-hash-on-load 0 seconds - integration/convert-ziplist-zset-on-load 22 seconds - integration/psync2-reg 1 seconds - integration/valkey-benchmark 47 seconds - unit/cluster/many-slot-migration 5 seconds - integration/replica-redirect 12 seconds - integration/aof 13 seconds - integration/shutdown 11 seconds - integration/psync2-master-restart 43 seconds - integration/psync2 14 seconds - integration/corrupt-dump 167 seconds - unit/hashexpire 22 seconds - integration/replication-4 8 seconds - integration/replication-2 6 seconds - integration/dismiss-mem 12 seconds - integration/valkey-cli 20 seconds - integration/psync2-pingoff 110 seconds - unit/cluster/slot-migration 89 seconds - unit/cluster/failover2 32 seconds - integration/replication-buffer 158 seconds - unit/cluster/replica-migration 104 seconds - unit/cluster/diskless-load-swapdb 144 seconds - unit/cluster/manual-failover 166 seconds - unit/cluster/slot-stats 147 seconds - integration/dual-channel-replication 205 seconds - integration/replication 241 seconds - integration/replication-psync 0 seconds - defrag 0 seconds - bitops-large-memory 0 seconds - violations 0 seconds - set-large-memory 0 seconds - list-large-memory 39 seconds - cluster \o/ All tests passed without errors! Cleanup: may take some time... OK >>> valkey: Entering fakeroot... cd src && make install make[1]: Entering directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/src' cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MM acl.c adlist.c ae.c allocator_defrag.c anet.c aof.c bio.c bitops.c blocked.c call_reply.c childinfo.c cli_commands.c cli_common.c cluster.c cluster_legacy.c cluster_migrateslots.c cluster_slot_stats.c commandlog.c commands.c config.c connection.c crc16.c crc64.c crccombine.c crcspeed.c db.c debug.c defrag.c dict.c endianconv.c entry.c eval.c evict.c expire.c functions.c geo.c geohash.c geohash_helper.c hashtable.c hyperloglog.c intset.c io_threads.c kvstore.c latency.c lazyfree.c listpack.c localtime.c logreqres.c lolwut.c lolwut5.c lolwut6.c lolwut9.c lua/debug_lua.c lua/engine_lua.c lua/function_lua.c lua/script_lua.c lzf_c.c lzf_d.c memory_prefetch.c memtest.c module.c monotonic.c mt19937-64.c multi.c networking.c notify.c object.c pqsort.c pubsub.c quicklist.c rand.c rax.c rdb.c rdma.c release.c replication.c resp_parser.c rio.c script.c scripting_engine.c sds.c sentinel.c server.c serverassert.c setcpuaffinity.c setproctitle.c sha1.c sha256.c siphash.c socket.c sort.c sparkline.c strl.c syncio.c syscheck.c t_hash.c t_list.c t_set.c t_stream.c t_string.c t_zset.c threads_mngr.c timeout.c tls.c trace/trace.c trace/trace_aof.c trace/trace_cluster.c trace/trace_commands.c trace/trace_db.c trace/trace_rdb.c trace/trace_server.c tracking.c unix.c util.c valkey-benchmark.c valkey-check-aof.c valkey-check-rdb.c valkey-cli.c vector.c vset.c ziplist.c zipmap.c zmalloc.c > Makefile.dep 2> /dev/null || true cc -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -I. -MMD -o release.o -c release.c cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-server threads_mngr.o adlist.o vector.o quicklist.o ae.o anet.o dict.o hashtable.o kvstore.o server.o sds.o zmalloc.o lzf_c.o lzf_d.o pqsort.o zipmap.o sha1.o ziplist.o release.o memory_prefetch.o io_threads.o networking.o util.o object.o db.o replication.o rdb.o t_string.o t_list.o t_set.o t_zset.o t_hash.o config.o aof.o pubsub.o multi.o debug.o sort.o intset.o syncio.o cluster.o cluster_legacy.o cluster_slot_stats.o crc16.o cluster_migrateslots.o endianconv.o commandlog.o eval.o bio.o rio.o rand.o memtest.o syscheck.o crcspeed.o crccombine.o crc64.o bitops.o sentinel.o notify.o setproctitle.o blocked.o hyperloglog.o latency.o sparkline.o valkey-check-rdb.o valkey-check-aof.o geo.o lazyfree.o module.o evict.o expire.o geohash.o geohash_helper.o childinfo.o allocator_defrag.o defrag.o siphash.o rax.o t_stream.o listpack.o localtime.o lolwut.o lolwut5.o lolwut6.o lolwut9.o acl.o tracking.o socket.o tls.o sha256.o timeout.o setcpuaffinity.o monotonic.o mt19937-64.o resp_parser.o call_reply.o script.o functions.o commands.o strl.o connection.o unix.o logreqres.o rdma.o scripting_engine.o entry.o vset.o lua/script_lua.o lua/function_lua.o lua/engine_lua.o lua/debug_lua.o trace/trace.o trace/trace_commands.o trace/trace_db.o trace/trace_cluster.o trace/trace_server.o trace/trace_rdb.o trace/trace_aof.o ../deps/libvalkey/lib/libvalkey.a ../deps/lua/src/liblua.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-cli anet.o adlist.o dict.o valkey-cli.o zmalloc.o release.o ae.o serverassert.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o cli_commands.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/linenoise/linenoise.o ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto cc -Wl,--as-needed,-O1,--sort-common -rdynamic -o valkey-benchmark ae.o anet.o valkey-benchmark.o adlist.o dict.o zmalloc.o serverassert.o release.o crcspeed.o crccombine.o crc64.o siphash.o crc16.o monotonic.o cli_common.o mt19937-64.o strl.o sds.o util.o sha256.o ../deps/libvalkey/lib/libvalkey.a ../deps/hdr_histogram/libhdrhistogram.a ../deps/fpconv/libfpconv.a -lm -ldl -pthread -lrt ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto install valkey-server valkey-sentinel install valkey-server valkey-check-rdb install valkey-server valkey-check-aof cc -o valkey-tls.so tls.c -shared -fPIC -pedantic -std=gnu11 -Wall -W -Wno-missing-field-initializers -Werror=deprecated-declarations -Wstrict-prototypes -Werror=undef -Os -fstack-clash-protection -Wformat -Werror=format-security -DUSE_MALLOC_USABLE_SIZE -O2 -flto=auto -I../deps/libvalkey/include -I../deps/linenoise -I../deps/lua/src -I../deps/hdr_histogram -I../deps/fpconv -DUSE_OPENSSL=2 -DBUILD_TLS_MODULE=2 ../deps/libvalkey/lib/libvalkey_tls.a -lssl -lcrypto Hint: It's a good idea to run 'make test' ;) install valkey-server /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin install valkey-benchmark /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin install valkey-cli /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin ln -sf valkey-server /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-server ln -sf valkey-cli /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-cli ln -sf valkey-benchmark /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-benchmark ln -sf valkey-check-rdb /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-check-rdb ln -sf valkey-check-aof /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-check-aof ln -sf valkey-sentinel /home/buildozer/aports/main/valkey/pkg/valkey/usr/bin/redis-sentinel make[1]: Leaving directory '/home/buildozer/aports/main/valkey/src/valkey-9.0.3/src' >>> valkey-tls*: Running split function tls... libfakeroot internal error: payload not recognized! 'usr/lib/valkey/modules/tls.so' -> '/home/buildozer/aports/main/valkey/pkg/valkey-tls/usr/lib/valkey/modules/tls.so' 'etc/valkey/modules/tls.conf' -> '/home/buildozer/aports/main/valkey/pkg/valkey-tls/etc/valkey/modules/tls.conf' >>> valkey-tls*: Preparing subpackage valkey-tls... >>> valkey-tls*: Stripping binaries Please specify at least one package name on the command line. >>> valkey-tls*: Running postcheck for valkey-tls >>> valkey-benchmark*: Running split function benchmark... libfakeroot internal error: payload not recognized! 'usr/bin/valkey-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-benchmark/usr/bin/valkey-benchmark' >>> valkey-benchmark*: Preparing subpackage valkey-benchmark... >>> valkey-benchmark*: Stripping binaries Please specify at least one package name on the command line. >>> valkey-benchmark*: Running postcheck for valkey-benchmark >>> valkey-cli*: Running split function cli... 'usr/bin/valkey-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-cli/usr/bin/valkey-cli' >>> valkey-cli*: Preparing subpackage valkey-cli... >>> valkey-cli*: Stripping binaries Please specify at least one package name on the command line. >>> valkey-cli*: Running postcheck for valkey-cli >>> valkey-compat*: Running split function compat... 'usr/bin/redis-benchmark' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-benchmark' 'usr/bin/redis-check-aof' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-aof' 'usr/bin/redis-check-rdb' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-check-rdb' 'usr/bin/redis-cli' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-cli' 'usr/bin/redis-sentinel' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-sentinel' 'usr/bin/redis-server' -> '/home/buildozer/aports/main/valkey/pkg/valkey-compat/usr/bin/redis-server' >>> valkey-compat*: Preparing subpackage valkey-compat... >>> valkey-compat*: Script found. /bin/sh added as a dependency >>> valkey-compat*: Adding .pre-install Please specify at least one package name on the command line. >>> valkey-compat*: Running postcheck for valkey-compat >>> valkey-openrc*: Running split function openrc... 'etc/conf.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/conf.d' 'etc/init.d' -> '/home/buildozer/aports/main/valkey/pkg/valkey-openrc/etc/init.d' >>> valkey-openrc*: Preparing subpackage valkey-openrc... Please specify at least one package name on the command line. >>> valkey-openrc*: Running postcheck for valkey-openrc >>> valkey*: Running postcheck for valkey >>> valkey*: Preparing package valkey... >>> valkey*: Stripping binaries >>> valkey*: Script found. /bin/sh added as a dependency >>> valkey*: Adding .pre-install >>> valkey*: Adding .post-install Please specify at least one package name on the command line. >>> valkey*: Scanning shared objects >>> valkey-tls*: Scanning shared objects >>> valkey-benchmark*: Scanning shared objects >>> valkey-cli*: Scanning shared objects >>> valkey-benchmark*: Tracing dependencies... so:libc.musl-s390x.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-benchmark*: Package size: 318.7 KB >>> valkey-benchmark*: Compressing data... >>> valkey-benchmark*: Create checksum... >>> valkey-benchmark*: Create valkey-benchmark-9.0.3-r0.apk >>> valkey-cli*: Tracing dependencies... so:libc.musl-s390x.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-cli*: Package size: 659.8 KB >>> valkey-cli*: Compressing data... >>> valkey-cli*: Create checksum... >>> valkey-cli*: Create valkey-cli-9.0.3-r0.apk >>> valkey-compat*: Tracing dependencies... !redis !redict-compat /bin/sh valkey-cli=9.0.3-r0 valkey=9.0.3-r0 >>> valkey-compat*: Package size: 1.0 B >>> valkey-compat*: Compressing data... >>> valkey-compat*: Create checksum... >>> valkey-compat*: Create valkey-compat-9.0.3-r0.apk >>> valkey-openrc*: Tracing dependencies... >>> valkey-openrc*: Package size: 2.6 KB >>> valkey-openrc*: Compressing data... >>> valkey-openrc*: Create checksum... >>> valkey-openrc*: Create valkey-openrc-9.0.3-r0.apk >>> valkey-tls*: Tracing dependencies... valkey=9.0.3-r0 so:libc.musl-s390x.so.1 so:libcrypto.so.3 so:libssl.so.3 >>> valkey-tls*: Package size: 82.0 KB >>> valkey-tls*: Compressing data... >>> valkey-tls*: Create checksum... >>> valkey-tls*: Create valkey-tls-9.0.3-r0.apk >>> valkey*: Tracing dependencies... /bin/sh so:libc.musl-s390x.so.1 >>> valkey*: Package size: 3.3 MB >>> valkey*: Compressing data... >>> valkey*: Create checksum... >>> valkey*: Create valkey-9.0.3-r0.apk >>> valkey: Build complete at Sun, 19 Apr 2026 05:33:19 +0000 elapsed time 0h 8m 1s >>> valkey: Cleaning up srcdir >>> valkey: Cleaning up pkgdir >>> valkey: Uninstalling dependencies... ( 1/10) Purging .makedepends-valkey (20260419.052518) ( 2/10) Purging linux-headers (7.0.0-r0) ( 3/10) Purging openssl-dev (3.5.6-r0) ( 4/10) Purging tcl (8.6.17-r1) ( 5/10) Purging tzdata (2026a-r0) ( 6/10) Purging procps-ng (4.0.6-r0) ( 7/10) Purging libintl (1.0-r0) ( 8/10) Purging libproc2 (4.0.6-r0) ( 9/10) Purging utmps-libs (0.1.3.2-r1) (10/10) Purging skalibs-libs (2.14.5.1-r0) Executing busybox-1.37.0-r31.trigger OK: 384.9 MiB in 101 packages >>> valkey: Updating the main/s390x repository index... >>> valkey: Signing the index...